BOBtheBlinker/android_device_motorola_milanf
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

pstar -> berlin

Browse source
This commit is contained in:
SGCMarkus 2022-03-26 17:01:30 +01:00
parent 8ac7410560
commit 0b269c9a8e
25 changed files with 334 additions and 301 deletions
Download patch file Download diff file Expand all files Collapse all files

314
resource-overlay/berlin/Frameworks/res/values/config.xml Normal file
View file

@ -0,0 +1,314 @@
<?xml version="1.0" encoding="utf-8"?>
<!--
Copyright (C) 2022 The LineageOS Project
SPDX-License-Identifier: Apache-2.0
-->
<resources>
<!-- Array of light sensor LUX values to define our levels for auto backlight brightness support.
The N entries of this array define N + 1 control points as follows:
(1-based arrays)
Point 1: (0, value[1]): lux <= 0
Point 2: (level[1], value[2]): 0 < lux <= level[1]
Point 3: (level[2], value[3]): level[2] < lux <= level[3]
...
Point N+1: (level[N], value[N+1]): level[N] < lux
The control points must be strictly increasing. Each control point
corresponds to an entry in the brightness backlight values arrays.
For example, if LUX == level[1] (first element of the levels array)
then the brightness will be determined by value[2] (second element
of the brightness values array).
Spline interpolation is used to determine the auto-brightness
backlight values for LUX levels between these control points.
Must be overridden in platform specific overlays -->
<integer-array name="config_autoBrightnessLevels">
<item>5</item>
<item>10</item>
<item>40</item>
<item>100</item>
<item>325</item>
<item>1250</item>
<item>3500</item>
<item>5500</item>
</integer-array>
<!-- Array of desired screen brightness in nits corresponding to the lux values
in the config_autoBrightnessLevels array. As with config_screenBrightnessMinimumNits and
config_screenBrightnessMaximumNits, the display brightness is defined as the measured
brightness of an all-white image.
If this is defined then:
- config_autoBrightnessLcdBacklightValues should not be defined
- config_screenBrightnessNits must be defined
- config_screenBrightnessBacklight must be defined
This array should have size one greater than the size of the config_autoBrightnessLevels
array. The brightness values must be non-negative and non-decreasing. This must be
overridden in platform specific overlays -->
<array name="config_autoBrightnessDisplayValuesNits">
<item>5</item>
<item>12</item>
<item>24</item>
<item>95</item>
<item>111</item>
<item>149</item>
<item>192</item>
<item>252</item>
<item>500</item>
</array>
<!-- An array describing the screen's backlight values corresponding to the brightness
values in the config_screenBrightnessNits array.
This array should be equal in size to config_screenBrightnessBacklight. -->
<integer-array name="config_screenBrightnessBacklight">
<item>0</item>
<item>4</item>
<item>7</item>
<item>13</item>
<item>51</item>
<item>59</item>
<item>82</item>
<item>102</item>
<item>138</item>
<item>255</item>
</integer-array>
<!-- An array of floats describing the screen brightness in nits corresponding to the backlight
values in the config_screenBrightnessBacklight array. On OLED displays these values
should be measured with an all white image while the display is in the fully on state.
Note that this value should *not* reflect the maximum brightness value for any high
brightness modes but only the maximum brightness value obtainable in a sustainable manner.
This array should be equal in size to config_screenBrightnessBacklight -->
<array name="config_screenBrightnessNits">
<item>0</item>
<item>5</item>
<item>12</item>
<item>24</item>
<item>95</item>
<item>111</item>
<item>149</item>
<item>192</item>
<item>252</item>
<item>500</item>
</array>
<!-- Stability requirements in milliseconds for accepting a new brightness level. This is used
for debouncing the light sensor. Different constants are used to debounce the light sensor
when adapting to brighter or darker environments. This parameter controls how quickly
brightness changes occur in response to an observed change in light level that exceeds the
hysteresis threshold. -->
<integer name="config_autoBrightnessBrighteningLightDebounce">500</integer>
<integer name="config_autoBrightnessDarkeningLightDebounce">500</integer>
<!-- The bounding path of the cutout region of the main built-in display.
Must either be empty if there is no cutout region, or a string that is parsable by
{@link android.util.PathParser}.
The path is assumed to be specified in display coordinates with pixel units and in
the display's native orientation, with the origin of the coordinate system at the
center top of the display. Optionally, you can append either `@left` or `@right` to the
end of the path string, in order to change the path origin to either the top left,
or top right of the display.
To facilitate writing device-independent emulation overlays, the marker `@dp` can be
appended after the path string to interpret coordinates in dp instead of px units.
Note that a physical cutout should be configured in pixels for the best results.
Example for a 10px x 10px square top-center cutout:
<string ...>M -5,0 L -5,10 L 5,10 L 5,0 Z</string>
Example for a 10dp x 10dp square top-center cutout:
<string ...>M -5,0 L -5,10 L 5,10 L 5,0 Z @dp</string>
@see https://www.w3.org/TR/SVG/paths.html#PathData
-->
<string translatable="false" name="config_mainBuiltInDisplayCutout">
M 0,0
h -35
v 90
h 70
v -90
Z
</string>
<!-- Indicate whether to allow the device to suspend when the screen is off
due to the proximity sensor. This resource should only be set to true
if the sensor HAL correctly handles the proximity sensor as a wake-up source.
Otherwise, the device may fail to wake out of suspend reliably.
The default is false. -->
<bool name="config_suspendWhenScreenOffDueToProximity">true</bool>
<!-- Whether device supports double tap to wake -->
<bool name="config_supportDoubleTapWake">true</bool>
<!-- Power Management: Specifies whether to decouple the auto-suspend state of the
device from the display on/off state.
When false, autosuspend_disable() will be called before the display is turned on
and autosuspend_enable() will be called after the display is turned off.
This mode provides best compatibility for devices using legacy power management
features such as early suspend / late resume.
When true, autosuspend_display() and autosuspend_enable() will be called
independently of whether the display is being turned on or off. This mode
enables the power manager to suspend the application processor while the
display is on.
This resource should be set to "true" when a doze component has been specified
to maximize power savings but not all devices support it.
Refer to autosuspend.h for details.
-->
<bool name="config_powerDecoupleAutoSuspendModeFromDisplay">true</bool>
<!-- Power Management: Specifies whether to decouple the interactive state of the
device from the display on/off state.
When false, setInteractive(..., true) will be called before the display is turned on
and setInteractive(..., false) will be called after the display is turned off.
This mode provides best compatibility for devices that expect the interactive
state to be tied to the display state.
When true, setInteractive(...) will be called independently of whether the display
is being turned on or off. This mode enables the power manager to reduce
clocks and disable the touch controller while the display is on.
This resource should be set to "true" when a doze component has been specified
to maximize power savings but not all devices support it.
Refer to power.h for details.
-->
<bool name="config_powerDecoupleInteractiveModeFromDisplay">true</bool>
<!-- List of biometric sensors on the device, in decreasing strength. Consumed by AuthService
when registering authenticators with BiometricService. Format must be ID:Modality:Strength,
where: IDs are unique per device, Modality as defined in BiometricAuthenticator.java,
and Strength as defined in Authenticators.java -->
<string-array name="config_biometric_sensors" translatable="false" >
<item>0:2:15</item> <!-- ID0:Fingerprint:Strong -->
</string-array>
<!-- Is the notification LED intrusive? Used to decide if there should be a disable option -->
<bool name="config_intrusiveNotificationLed">true</bool>
<!-- Screen brightness used to dim the screen when the user activity
timeout expires. May be less than the minimum allowed brightness setting
that can be set by the user. -->
<integer name="config_screenBrightnessDim">4</integer>
<!-- Minimum screen brightness setting allowed by the power manager.
The user is forbidden from setting the brightness below this level. -->
<integer name="config_screenBrightnessSettingMinimum">2</integer>
<!-- Vibrator pattern for feedback about a long screen/key press -->
<integer-array name="config_longPressVibePattern">
<item>0</item>
<item>67</item>
</integer-array>
<!-- Vibrator pattern for feedback about touching a virtual key -->
<integer-array name="config_virtualKeyVibePattern">
<item>0</item>
<item>67</item>
</integer-array>
<!-- Vibrator pattern for a very short but reliable vibration for soft keyboard tap -->
<integer-array name="config_keyboardTapVibePattern">
<item>0</item>
<item>30</item>
</integer-array>
<!-- Vibrator pattern for feedback about booting with safe mode enabled -->
<integer-array name="config_safeModeEnabledVibePattern">
<item>0</item>
<item>0</item>
<item>94</item>
</integer-array>
<!-- Vibrator pattern for feedback about hitting a scroll barrier -->
<integer-array name="config_scrollBarrierVibePattern">
<item>0</item>
<item>15</item>
<item>30</item>
<item>15</item>
</integer-array>
<!-- True if the device supports system navigation keys. -->
<bool name="config_supportSystemNavigationKeys">true</bool>
<!-- Specify if the fingerprint hardware support gestures-->
<bool name="config_fingerprintSupportsGestures">true</bool>
<!-- ComponentName of a dream to show whenever the system would otherwise have
gone to sleep. When the PowerManager is asked to go to sleep, it will instead
try to start this dream if possible. The dream should typically call startDozing()
to put the display into a low power state and allow the application processor
to be suspended. When the dream ends, the system will go to sleep as usual.
Specify the component name or an empty string if none.
Note that doze dreams are not subject to the same start conditions as ordinary dreams.
Doze dreams will run whenever the power manager is in a dozing state. -->
<string name="config_dozeComponent">com.android.systemui/com.android.systemui.doze.DozeService</string>
<!-- If true, the doze component is not started until after the screen has been
turned off and the screen off animation has been performed. -->
<bool name="config_dozeAfterScreenOffByDefault">true</bool>
<!-- Whether the always on display mode is available. This should only be enabled
on devices where the display has been tuned to be power efficient in DOZE and/or
DOZE_SUSPEND states. -->
<bool name="config_dozeAlwaysOnDisplayAvailable">true</bool>
<!-- Control whether the always on display mode is enabled by default. This value will be used
during initialization when the setting is still null. -->
<bool name="config_dozeAlwaysOnEnabled">false</bool>
<!-- An array of arrays of side fingerprint sensor properties relative to each display.
Note: this value is temporary and is expected to be queried directly
from the HAL in the future. -->
<array name="config_sfps_sensor_props" translatable="false">
<item>@array/config_sfps_sensor_props_0</item>
</array>
<array name="config_sfps_sensor_props_0" translatable="false">
<item>local:4630947043778501761</item> <!--item>displayId</item-->
<item>1080</item> <!--item>sensorLocationX</item-->
<item>705</item> <!--item>sensorLocationY</item-->
<item>150</item> <!--item>sensorRadius</item-->
</array>
<!-- Indicates whether device has a power button fingerprint sensor. -->
<bool name="config_is_powerbutton_fps" translatable="false">true</bool>
<!-- The default refresh rate for a given device. Change this value to set a higher default
refresh rate. If the hardware composer on the device supports display modes with a higher
refresh rate than the default value specified here, the framework may use those higher
refresh rate modes if an app chooses one by setting preferredDisplayModeId or calling
setFrameRate().
If a non-zero value is set for config_defaultPeakRefreshRate, then
config_defaultRefreshRate may be set to 0, in which case the value set for
config_defaultPeakRefreshRate will act as the default frame rate. -->
<integer name="config_defaultRefreshRate">0</integer>
<!-- The default peak refresh rate for a given device. Change this value if you want to prevent
the framework from using higher refresh rates, even if display modes with higher refresh
rates are available from hardware composer. Only has an effect if the value is
non-zero. -->
<integer name="config_defaultPeakRefreshRate">60</integer>
<!-- MMS user agent string -->
<string name="config_mms_user_agent" translatable="false">motorolaedge20pro</string>
<!-- MMS user agent profile url -->
<string name="config_mms_user_agent_profile_url" translatable="false">http://uaprof.motorola.com/phoneconfig/motov1/Profile/motov1.rdf</string>
<!-- List supported color modes. -->
<integer-array name="config_availableColorModes">
<item>0</item> <!-- COLOR_MODE_NATURAL --> <!-- This uses colorimetric render intents-->
<item>1</item> <!-- COLOR_MODE_BOOSTED --> <!-- This applies a 10% boost using the PCC-->
<item>2</item> <!-- COLOR_MODE_SATURATED -->
<item>3</item> <!-- COLOR_MODE_AUTOMATIC --> <!-- This uses enhanced render intents-->
</integer-array>
</resources>

22
resource-overlay/berlin/Frameworks/res/values/dimens.xml Normal file
View file

@ -0,0 +1,22 @@
<?xml version="1.0" encoding="utf-8"?>
<!--
Copyright (C) 2022 The LineageOS Project
SPDX-License-Identifier: Apache-2.0
-->
<resources>
<!-- Radius of the software rounded corners. -->
<dimen name="rounded_corner_radius">90px</dimen>
<!-- Height of the status bar in portrait. The height should be
Max((status bar content height + waterfall top size), top cutout size) -->
<dimen name="status_bar_height_portrait">90px</dimen>
<!-- Height of the status bar in landscape. The height should be
Max((status bar content height + waterfall top size), top cutout size) -->
<dimen name="status_bar_height_landscape">24dp</dimen>
<!-- Height of area above QQS where battery/time go -->
<dimen name="quick_qs_offset_height">@dimen/status_bar_height_portrait</dimen>
<dimen name="status_bar_padding_top_portrait">10.0px</dimen>
</resources>

106
resource-overlay/berlin/Frameworks/res/xml/power_profile.xml Normal file
View file

@ -0,0 +1,106 @@
<?xml version="1.0" encoding="utf-8"?>
<device name="Android">
<item name="none">0</item>
<item name="screen.on">139.28</item>
<item name="screen.full">155.5</item>
<item name="wifi.on">0.9</item>
<item name="wifi.active">34.36</item>
<item name="wifi.scan">4.73</item>
<item name="camera.avg">523.93</item>
<item name="camera.flashlight">200.75</item>
<item name="gps.on">171</item>
<item name="radio.active">86.278</item>
<item name="radio.scanning">10.57</item>
<array name="radio.on">
<value>33.079</value>
<value>30</value>
<value>25</value>
<value>20</value>
<value>15</value>
<value>10</value>
<value>5</value>
<value>1.463</value>
</array>
<array name="cpu.clusters.cores">
<value>4</value>
<value>3</value>
<value>1</value>
</array>
<array name="cpu.core_speeds.cluster0">
<value>300000</value>
<value>691200</value>
<value>806400</value>
<value>940800</value>
<value>1152000</value>
<value>1324800</value>
<value>1516800</value>
<value>1651200</value>
<value>1804800</value>
</array>
<array name="cpu.core_speeds.cluster1">
<value>691200</value>
<value>940800</value>
<value>1228800</value>
<value>1344000</value>
<value>1516800</value>
<value>1651200</value>
<value>1900800</value>
<value>2054400</value>
<value>2131200</value>
<value>2400000</value>
</array>
<array name="cpu.core_speeds.cluster2">
<value>806400</value>
<value>1056000</value>
<value>1324800</value>
<value>1516800</value>
<value>1766400</value>
<value>1862400</value>
<value>2035200</value>
<value>2208000</value>
<value>2380800</value>
<value>2400000</value>
</array>
<array name="cpu.core_power.cluster0">
<value>4.13</value>
<value>6.9</value>
<value>7.26</value>
<value>8.88</value>
<value>12.17</value>
<value>15.7</value>
<value>20.06</value>
<value>25.76</value>
<value>30.9</value>
</array>
<array name="cpu.core_power.cluster1">
<value>26.93</value>
<value>20.23</value>
<value>57.22</value>
<value>71.71</value>
<value>91.77</value>
<value>108.31</value>
<value>158.29</value>
<value>182.69</value>
<value>186.79</value>
<value>230.89</value>
</array>
<array name="cpu.core_power.cluster2">
<value>34.69</value>
<value>49.4</value>
<value>70.56</value>
<value>89.92</value>
<value>117.81</value>
<value>129.49</value>
<value>185.7</value>
<value>184.51</value>
<value>218.2</value>
<value>233.16</value>
</array>
<item name="cpu.cluster_power.cluster0">1.13</item>
<item name="cpu.cluster_power.cluster1">1.13</item>
<item name="cpu.cluster_power.cluster1">1.13</item>
<item name="cpu.suspend">5.5</item>
<item name="cpu.idle">15.86</item>
<item name="cpu.active">5.79</item>
<item name="battery.capacity">4000</item>
</device>