berlin: import audio, media, rootdir from stock RRG31.Q3-23-85
This commit is contained in:
SGCMarkus
parent
bfde6ce46d
commit
43d4cc2e5a
17 changed files with 2986 additions and 2585 deletions
|
|
@ -1,84 +0,0 @@
|
|||
#!/vendor/bin/sh
|
||||
#
|
||||
# Identify fingerprint sensor model
|
||||
#
|
||||
# Copyright (c) 2019 Lenovo
|
||||
# All rights reserved.
|
||||
#
|
||||
# Changed Log:
|
||||
# ---------------------------------
|
||||
# April 15, 2019 chengql2@lenovo.com Initial version
|
||||
# April 28, 2019 chengql2 Add fps_id creating step
|
||||
# December 2, 2019 chengql2 Store fps_id into persist fs, and identify sensor
|
||||
# again when secure unit boots as factory mode.
|
||||
|
||||
script_name=${0##*/}
|
||||
script_name=${script_name%.*}
|
||||
function notice {
|
||||
log -t "$scriptname" -p i "$*"
|
||||
}
|
||||
|
||||
persist_fps_id=/mnt/vendor/persist/fps/vendor_id
|
||||
|
||||
FPS_VENDOR_GOODIX=goodix
|
||||
FPS_VENDOR_FPC=fpc
|
||||
FPS_VENDOR_NONE=none
|
||||
|
||||
PROP_FPS_IDENT=vendor.hw.fps.ident
|
||||
MAX_TIMES=20
|
||||
|
||||
function ident_fps {
|
||||
log "- install FPC driver"
|
||||
insmod /vendor/lib/modules/fpc1020_mmi.ko
|
||||
sleep 1
|
||||
notice "- identify FPC sensor"
|
||||
setprop $PROP_FPS_IDENT ""
|
||||
start fpc_ident
|
||||
for i in $(seq 1 $MAX_TIMES)
|
||||
do
|
||||
sleep 0.1
|
||||
ident_status=$(getprop $PROP_FPS_IDENT)
|
||||
notice "-result : $ident_status"
|
||||
if [ $ident_status == $FPS_VENDOR_FPC ]; then
|
||||
log "ok"
|
||||
echo $FPS_VENDOR_FPC > $persist_fps_id
|
||||
return 0
|
||||
elif [ $ident_status == $FPS_VENDOR_NONE ]; then
|
||||
notice "fail"
|
||||
notice "- unload FPC driver"
|
||||
rmmod fpc1020_mmi
|
||||
break
|
||||
fi
|
||||
done
|
||||
|
||||
notice "- install Goodix driver"
|
||||
insmod /vendor/lib/modules/goodix_fod_mmi.ko
|
||||
echo $FPS_VENDOR_GOODIX > $persist_fps_id
|
||||
return 0
|
||||
}
|
||||
|
||||
if [ ! -f $persist_fps_id ]; then
|
||||
ident_fps
|
||||
return $?
|
||||
fi
|
||||
|
||||
fps_vendor=$(cat $persist_fps_id)
|
||||
if [ -z $fps_vendor ]; then
|
||||
fps_vendor=$FPS_VENDOR_NONE
|
||||
fi
|
||||
notice "FPS vendor: $fps_vendor"
|
||||
|
||||
if [ $fps_vendor == $FPS_VENDOR_GOODIX ]; then
|
||||
notice "- install Goodix driver"
|
||||
insmod /vendor/lib/modules/goodix_fod_mmi.ko
|
||||
return $?
|
||||
fi
|
||||
|
||||
if [ $fps_vendor == $FPS_VENDOR_FPC ]; then
|
||||
notice "- install FPC driver"
|
||||
insmod /vendor/lib/modules/fpc1020_mmi.ko
|
||||
return $?
|
||||
fi
|
||||
|
||||
ident_fps
|
||||
return $?
|
||||
|
|
@ -1,123 +0,0 @@
|
|||
#!/vendor/bin/sh
|
||||
#
|
||||
# Start indicated fingerprint HAL service
|
||||
#
|
||||
# Copyright (c) 2019 Lenovo
|
||||
# All rights reserved.
|
||||
#
|
||||
# April 15, 2019 chengql2@lenovo.com Initial version
|
||||
# December 2, 2019 chengql2 Store fps_id into persist fs
|
||||
|
||||
script_name=${0##*/}
|
||||
script_name=${script_name%.*}
|
||||
function notice {
|
||||
log -t "$scriptname" -p i "$*"
|
||||
}
|
||||
|
||||
persist_fps_id=/mnt/vendor/persist/fps/vendor_id
|
||||
persist_fps_id2=/mnt/vendor/persist/fps/last_vendor_id
|
||||
MAX_TIMES=100
|
||||
|
||||
if [ ! -f $persist_fps_id ]; then
|
||||
notice "warn: no associated persist file found"
|
||||
return -1
|
||||
fi
|
||||
FPS_VENDOR_NONE=none
|
||||
FPS_VENDOR_GOODIX=goodix
|
||||
FPS_VENDOR_FPC=fpc
|
||||
|
||||
prop_fps_status=vendor.hw.fingerprint.status
|
||||
prop_persist_fps=persist.vendor.hardware.fingerprint
|
||||
|
||||
FPS_STATUS_NONE=none
|
||||
FPS_STATUS_OK=ok
|
||||
|
||||
fps_vendor2=$(cat $persist_fps_id2)
|
||||
if [ -z $fps_vendor2 ]; then
|
||||
fps_vendor2=$FPS_VENDOR_NONE
|
||||
fi
|
||||
notice "FPS vendor (last): $fps_vendor2"
|
||||
fps_vendor=$(cat $persist_fps_id)
|
||||
if [ -z $fps_vendor ]; then
|
||||
fps_vendor=$FPS_VENDOR_NONE
|
||||
fi
|
||||
notice "FPS vendor: $fps_vendor"
|
||||
|
||||
if [ $fps_vendor == $FPS_STATUS_NONE ]; then
|
||||
notice "warn: boot as the last FPS"
|
||||
fps=$fps_vendor2
|
||||
else
|
||||
fps=$fps_vendor
|
||||
fi
|
||||
|
||||
for i in $(seq 1 2)
|
||||
do
|
||||
|
||||
setprop $prop_fps_status $FPS_STATUS_NONE
|
||||
if [ $fps == $FPS_VENDOR_FPC ]; then
|
||||
notice "start fps_hal"
|
||||
start fps_hal
|
||||
else
|
||||
notice "start goodix_hal"
|
||||
start goodix_hal
|
||||
fi
|
||||
|
||||
notice "wait for HAL finish ..."
|
||||
fps_status=$(getprop $prop_fps_status)
|
||||
for ii in $(seq 1 $MAX_TIMES)
|
||||
do
|
||||
# notice "check fps vendor status: $fps_status"
|
||||
if [ $fps_status != $FPS_STATUS_NONE ]; then
|
||||
break
|
||||
fi
|
||||
sleep 0.2
|
||||
fps_status=$(getprop $prop_fps_status)
|
||||
done
|
||||
notice "fingerprint HAL status: $fps_status"
|
||||
|
||||
if [ $fps_status == $FPS_STATUS_OK ]; then
|
||||
notice "HAL success"
|
||||
setprop $prop_persist_fps $fps
|
||||
if [ $fps_vendor2 == $fps ]; then
|
||||
return 0
|
||||
fi
|
||||
notice "- update FPS vendor (last)"
|
||||
echo $fps > $persist_fps_id2
|
||||
notice "- done"
|
||||
return 0
|
||||
fi
|
||||
|
||||
if [ $fps == $fps_vendor2 ]; then
|
||||
if [ $fps == $FPS_VENDOR_FPC ]; then
|
||||
rmmod fpc1020_mmi
|
||||
sleep 0.1
|
||||
stop fps_hal
|
||||
sleep 0.1
|
||||
insmod /vendor/lib/modules/goodix_fod_mmi.ko
|
||||
fps=$FPS_VENDOR_GOODIX
|
||||
else
|
||||
rmmod goodix_fod_mmi
|
||||
sleep 0.1
|
||||
stop goodix_hal
|
||||
sleep 0.1
|
||||
insmod /vendor/lib/modules/fpc1020_mmi.ko
|
||||
fps=$FPS_VENDOR_FPC
|
||||
fi
|
||||
notice "- update FPS vendor"
|
||||
echo $fps > $persist_fps_id
|
||||
sleep 1
|
||||
else
|
||||
notice "error: HAL fail unload ko"
|
||||
if [ $fps == $FPS_VENDOR_FPC ]; then
|
||||
rmmod fpc1020_mmi
|
||||
else
|
||||
rmmod goodix_fod_mmi
|
||||
fi
|
||||
setprop $prop_persist_fps $FPS_VENDOR_NONE
|
||||
echo $FPS_VENDOR_NONE > $persist_fps_id
|
||||
|
||||
notice "- done"
|
||||
return 1
|
||||
fi
|
||||
|
||||
done
|
||||
|
|
@ -1,158 +1,90 @@
|
|||
# NFC ST21NFC
|
||||
import /vendor/etc/init/hw/init.vendor.st21nfc.rc
|
||||
|
||||
on early-init
|
||||
setprop ro.vendor.device_edition ${ro.boot.edition}
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules qpnp-smbcharger-mmi qpnp_adaptive_charge
|
||||
exec u:r:vendor_modprove:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules touchscreen_mmi.ko stmicro_mmi.ko
|
||||
on early-init && property:ro.bootmode=mot-factory
|
||||
insmod /vendor/lib/modules/moto_f_usbnet.ko
|
||||
|
||||
on mmi-priority
|
||||
# Only high priority MMI DLKMs loaded here
|
||||
# For instance, sensor_class referenced from several DLKMs
|
||||
# and needs to load first. Touchscreen might need extra time
|
||||
# to perform firmware update if necessary
|
||||
setprop vendor.mmi_init.stage priority
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules sensors_class.ko
|
||||
on early-init
|
||||
exec_background u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules/${ro.vendor.mot.gki.path} mmi_annotate mmi_info mmi_relay
|
||||
|
||||
on early-init
|
||||
insmod /vendor/lib/modules/bm_adsp_ulog.ko
|
||||
insmod /vendor/lib/modules/mmi_charger.ko
|
||||
insmod /vendor/lib/modules/qti_glink_charger.ko
|
||||
insmod /vendor/lib/modules/cirrus_wm_adsp.ko
|
||||
insmod /vendor/lib/modules/cirrus_cs35l41.ko
|
||||
insmod /vendor/lib/modules/mmi_sys_temp.ko
|
||||
insmod /vendor/lib/modules/wl2864c.ko
|
||||
insmod /vendor/lib/modules/goodix_mmi.ko
|
||||
insmod /vendor/lib/modules/camera.ko
|
||||
insmod /vendor/lib/modules/aw8695.ko
|
||||
insmod /vendor/lib/modules/cci_intf.ko
|
||||
insmod /vendor/lib/modules/qpnp_adaptive_charge.ko
|
||||
start vendor.mmi_modules
|
||||
wait_for_prop init.svc.vendor.mmi_modules stopped
|
||||
|
||||
on fs
|
||||
# Majority of MMI DLKMs should be in this group
|
||||
setprop vendor.mmi_init.stage common
|
||||
insmod /vendor/lib/modules/wl2866d.ko
|
||||
insmod /vendor/lib/modules/mmi_info.ko
|
||||
insmod /vendor/lib/modules/mmi_annotate.ko
|
||||
insmod /vendor/lib/modules/mmi_sys_temp.ko
|
||||
insmod /vendor/lib/modules/qpnp-power-on-mmi.ko
|
||||
insmod /vendor/lib/modules/bq2597x_mmi.ko
|
||||
insmod /vendor/lib/modules/mmi_parallel_charger.ko
|
||||
insmod /vendor/lib/modules/mmi_parallel_charger_qc3p.ko
|
||||
insmod /vendor/lib/modules/mmi_annotate.ko
|
||||
insmod /vendor/lib/modules/mmi_info.ko
|
||||
insmod /vendor/lib/modules/tzlog_dump.ko
|
||||
insmod /vendor/lib/modules/watchdog_cpu_ctx.ko
|
||||
insmod /vendor/lib/modules/mmi_relay.ko
|
||||
insmod /vendor/lib/modules/sx937x_sar.ko
|
||||
insmod /vendor/lib/modules/st21nfc.ko
|
||||
insmod /vendor/lib/modules/stmvl53l1.ko
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules aw882xx_k419.ko aw8695.ko
|
||||
|
||||
on post-fs
|
||||
# "double tap" gesture
|
||||
chown system system /sys/class/sensors/dt-gesture/enable
|
||||
chmod 0660 /sys/class/sensors/dt-gesture/enable
|
||||
chown root input /sys/class/sensors/dt-gesture/enable_wakeup
|
||||
chmod 0660 /sys/class/sensors/dt-gesture/enable_wakeup
|
||||
chown root input /sys/class/sensors/dt-gesture/flush
|
||||
chmod 0660 /sys/class/sensors/dt-gesture/flush
|
||||
chown root input /sys/class/sensors/dt-gesture/max_latency
|
||||
chmod 0660 /sys/class/sensors/dt-gesture/max_latency
|
||||
chown root input /sys/class/sensors/dt-gesture/poll_delay
|
||||
chmod 0660 /sys/class/sensors/dt-gesture/poll_delay
|
||||
|
||||
service vendor.vl53l1_daemon /vendor/bin/vl53l1_daemon
|
||||
class late_start
|
||||
user root
|
||||
group root
|
||||
socket vl53l1_daemon stream 660 root system
|
||||
|
||||
service vendor.mmi-laser-sh /vendor/bin/init.mmi.laser.sh
|
||||
class core
|
||||
user root
|
||||
oneshot
|
||||
|
||||
on init
|
||||
write /sys/block/zram0/comp_algorithm lz4
|
||||
|
||||
on boot
|
||||
# Add for goodix fingerprint
|
||||
chown system system /dev/goodix_fp
|
||||
chmod 0664 /dev/goodix_fp
|
||||
mkdir /data/vendor/gf_data 0770 system system
|
||||
mkdir /mnt/vendor/persist/goodix 0770 system system
|
||||
# Add for CQA fps calibration test
|
||||
chown system system /sys/class/backlight/panel0-backlight/brightness
|
||||
chown system system /d/dri/0/debug/motUtil
|
||||
chmod 0666 /d/dri/0/debug/motUtil;
|
||||
chmod 0666 /sys/class/backlight/panel0-backlight/brightness
|
||||
# Set wls perms for HAL
|
||||
chown system system /sys/class/power_supply/wireless/device/tx_mode
|
||||
#Add for laser
|
||||
chown system system sys/class/laser/stmvl53l1/enable_sar
|
||||
chmod 0660 sys/class/laser/stmvl53l1/enable_sar
|
||||
chown system system sys/class/laser/stmvl53l1/set_delay_ms
|
||||
chmod 0660 sys/class/laser/stmvl53l1/set_delay_ms
|
||||
chown system system sys/class/laser/stmvl53l1/autonomous_config
|
||||
chmod 0660 sys/class/laser/stmvl53l1/autonomous_config
|
||||
chown system system sys/class/laser/stmvl53l1/enable_ps_sensor
|
||||
chmod 0660 sys/class/laser/stmvl53l1/enable_ps_sensor
|
||||
chown system system sys/class/laser/stmvl53l1/do_flush
|
||||
chmod 0660 sys/class/laser/stmvl53l1/do_flush
|
||||
chown system /sys/devices/virtual/laser/stmvl53l1/enable_sar
|
||||
chmod 0660 /sys/devices/virtual/laser/stmvl53l1/enable_sar
|
||||
chown system /sys/devices/virtual/laser/stmvl53l1/set_delay_ms
|
||||
chmod 0660 /sys/devices/virtual/laser/stmvl53l1/set_delay_ms
|
||||
chown system /sys/devices/virtual/laser/stmvl53l1/do_flush
|
||||
chmod 0660 /sys/devices/virtual/laser/stmvl53l1/do_flush
|
||||
chmod 0660 /sys/devices/virtual/laser/stmvl53l1/autonomous_config
|
||||
chown system /sys/devices/virtual/laser/stmvl53l1/autonomous_config
|
||||
chmod 0660 /sys/devices/virtual/laser/stmvl53l1/enable_ps_sensor
|
||||
chown system /sys/devices/virtual/laser/stmvl53l1/enable_ps_sensor
|
||||
chmod 0660 /sys/devices/virtual/laser/stmvl53l1/timing_budget
|
||||
chown system /sys/devices/virtual/laser/stmvl53l1/timing_budget
|
||||
chown system system /sys/devices/virtual/input/input1/timing_budget
|
||||
chmod 0660 /sys/devices/virtual/input/input1/timing_budget
|
||||
chmod 0664 /mnt/vendor/persist/camera/focus/offset_cal
|
||||
chmod 0664 /mnt/vendor/persist/camera/focus/cal_data
|
||||
# Touch grip suppression control
|
||||
chown system system /sys/class/touchscreen/primary/suppression
|
||||
chmod 0660 /sys/class/touchscreen/primary/suppression
|
||||
chown system system /sys/class/touchscreen/primary/pill_region
|
||||
chmod 0660 /sys/class/touchscreen/primary/pill_region
|
||||
chown system system /sys/class/touchscreen/primary/hold_distance
|
||||
chmod 0660 /sys/class/touchscreen/primary/hold_distance
|
||||
chown system system /sys/class/touchscreen/primary/gs_distance
|
||||
chmod 0660 /sys/class/touchscreen/primary/gs_distance
|
||||
chown system system /sys/class/touchscreen/primary/rotate
|
||||
chmod 0660 /sys/class/touchscreen/primary/rotate
|
||||
chown system system /sys/class/touchscreen/primary/interpolation
|
||||
chmod 0660 /sys/class/touchscreen/primary/interpolation
|
||||
chown system system /sys/class/touchscreen/primary/edge
|
||||
chmod 0660 /sys/class/touchscreen/primary/edge
|
||||
# Change ownership for capsensor
|
||||
chown root input /sys/class/sensors/Moto\ CapSense\ Ch0/enable
|
||||
chown root input /sys/class/sensors/Moto\ CapSense\ Ch0/poll_delay
|
||||
chown root input /sys/class/sensors/Moto\ CapSense\ Ch1/enable
|
||||
chown root input /sys/class/sensors/Moto\ CapSense\ Ch1/poll_delay
|
||||
chown root input /sys/class/sensors/Moto\ CapSense\ Ch2/enable
|
||||
chown root input /sys/class/sensors/Moto\ CapSense\ Ch2/poll_delay
|
||||
chown root input /sys/class/sensors/Moto\ CapSense\ Ch3/enable
|
||||
chown root input /sys/class/sensors/Moto\ CapSense\ Ch3/poll_delay
|
||||
chown root input /sys/class/sensors/Moto\ CapSense\ Ch4/enable
|
||||
chown root input /sys/class/sensors/Moto\ CapSense\ Ch4/poll_delay
|
||||
chown system system /sys/class/capsense/reset
|
||||
chown system system /sys/class/capsense/int_state
|
||||
# Set adaptive charging perms for HAL
|
||||
chown system system /sys/module/qpnp_adaptive_charge/parameters/upper_limit
|
||||
chown system system /sys/module/qpnp_adaptive_charge/parameters/lower_limit
|
||||
write /proc/sys/kernel/hung_task_timeout_secs 120
|
||||
# Change ownership and permission for bq25960-standalone factory testing
|
||||
chown system system /sys/class/power_supply/bq25960-standalone/voltage_now
|
||||
chown system system /sys/class/power_supply/bq25960-standalone/charging_enabled
|
||||
chmod 0644 /sys/class/power_supply/bq25960-standalone/voltage_now
|
||||
chmod 0664 /sys/class/power_supply/bq25960-standalone/charging_enabled
|
||||
|
||||
#fps dual sensor
|
||||
service vendor.ident-fps-overlay-sh /vendor/bin/init.oem.fingerprint.overlay.sh
|
||||
class core
|
||||
user root
|
||||
group drmrpc system
|
||||
oneshot
|
||||
disabled
|
||||
|
||||
# Turn on led to indicate device on factory mode
|
||||
on property:ro.bootmode=mot-factory
|
||||
write /sys/class/leds/charging/brightness 255
|
||||
# Goodix fingerprint sensor GF3626 reuses the driver "goodix_fod_mmi.ko"
|
||||
insmod /vendor/lib/modules/goodix_fod_mmi.ko
|
||||
|
||||
on post-fs-data
|
||||
mkdir /mnt/vendor/persist/tof 0755 vendor_tcmd camera
|
||||
chown vendor_tcmd camera /mnt/vendor/persist/tof/refspad_cal
|
||||
chown vendor_tcmd camera /mnt/vendor/persist/tof/xtalk_g1_cal
|
||||
chown vendor_tcmd camera /mnt/vendor/persist/tof/xtalk_shape_cal
|
||||
chown vendor_tcmd camera /mnt/vendor/persist/tof/xtalk_production_cal
|
||||
chown vendor_tcmd camera /mnt/vendor/persist/tof/offset_cal
|
||||
chmod 0640 /mnt/vendor/persist/tof/refspad_cal
|
||||
chmod 0640 /mnt/vendor/persist/tof/xtalk_g1_cal
|
||||
chmod 0640 /mnt/vendor/persist/tof/xtalk_shape_cal
|
||||
chmod 0640 /mnt/vendor/persist/tof/xtalk_production_cal
|
||||
chmod 0640 /mnt/vendor/persist/tof/offset_cal
|
||||
# Param updater data for various modules
|
||||
mkdir /data/vendor/param 0775 system system
|
||||
mkdir /data/vendor/tzstorage/goodix 0770 system system
|
||||
exec_start vendor.ident-fps-overlay-sh
|
||||
|
||||
on early-boot
|
||||
# Goodix fingerprint
|
||||
chown system system /dev/goodix_fp
|
||||
chmod 0664 /dev/goodix_fp
|
||||
|
||||
on boot
|
||||
# allow TCMD to access cci for OIS test
|
||||
chmod 0660 /dev/cci_intf
|
||||
chown system camera /dev/cci_intf
|
||||
|
||||
#change adsp pmic test command file access permission
|
||||
chown vendor_tcmd system /sys/devices/platform/soc/soc:qcom,pmic_glink/soc:qcom,pmic_glink:mmi,qti-glink-charger/tcmd
|
||||
chown vendor_tcmd system /sys/devices/platform/soc/soc:qcom,pmic_glink/soc:qcom,pmic_glink:mmi,qti-glink-charger/force_pmic_icl
|
||||
chmod 0660 /sys/devices/platform/soc/soc:qcom,pmic_glink/soc:qcom,pmic_glink:mmi,qti-glink-charger/tcmd
|
||||
chmod 0660 /sys/devices/platform/soc/soc:qcom,pmic_glink/soc:qcom,pmic_glink:mmi,qti-glink-charger/force_pmic_icl
|
||||
# Touch game mode control
|
||||
chown system system /sys/class/touchscreen/primary/rotate
|
||||
chmod 0660 /sys/class/touchscreen/primary/rotate
|
||||
chown system system /sys/class/touchscreen/primary/interpolation
|
||||
chmod 0660 /sys/class/touchscreen/primary/interpolation
|
||||
chown system system /sys/class/touchscreen/primary/edge
|
||||
chmod 0660 /sys/class/touchscreen/primary/edge
|
||||
chown system system /sys/class/touchscreen/primary/first_filter
|
||||
chmod 0660 /sys/class/touchscreen/primary/first_filter
|
||||
chown system system /sys/class/touchscreen/primary/sensitivity
|
||||
chmod 0660 /sys/class/touchscreen/primary/sensitivity
|
||||
# Set adaptive charging perms for HAL
|
||||
chown system system /sys/module/qpnp_adaptive_charge/parameters/upper_limit
|
||||
chown system system /sys/module/qpnp_adaptive_charge/parameters/lower_limit
|
||||
# touch screen calibration file
|
||||
mkdir /mnt/vendor/persist/touch
|
||||
chown vendor_tcmd system /mnt/vendor/persist/touch
|
||||
chmod 0775 /mnt/vendor/persist/touch
|
||||
|
||||
service capsense_reset /system/vendor/bin/capsense_reset
|
||||
class core
|
||||
user system
|
||||
group system input
|
||||
disabled
|
||||
|
||||
on property:sys.boot_completed=1
|
||||
start capsense_reset
|
||||
|
||||
on property:persist.vendor.paramfile.parse_panel=1
|
||||
write /sys/devices/platform/soc/soc:qcom,dsi-display-primary/dsi_display_parse_para "5"
|
||||
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue