BOBtheBlinker/android_device_motorola_sm6375-common
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

sm8250-common -> sm7325-common

Browse source
This commit is contained in:
SGCMarkus 2022-03-26 23:16:05 +01:00
parent 5404d41486
commit 95b667c5b9
74 changed files with 4210 additions and 3942 deletions
Download patch file Download diff file Expand all files Collapse all files

30
rootdir/bin/init.gbmods.sh
View file

@ -1,30 +0,0 @@
#!/vendor/bin/sh
debug=$(getprop ro.boot.gbdebug 2> /dev/null)
bootmode=$(getprop ro.bootmode 2> /dev/null)
# If androidboot.gbdebug is set on command line, skip inserting
# the pre-installed modules.
if [ "$debug" == "1" ]; then
return 0
fi
insmod /vendor/lib/modules/greybus.ko
# Only support PTP and BATTERY in charge-only mode
if [ "$bootmode" == "charger" ]; then
insmod /vendor/lib/modules/gb-mods.ko
insmod /vendor/lib/modules/gb-battery.ko
insmod /vendor/lib/modules/gb-ptp.ko
return 0
fi
gbmods="/vendor/lib/modules/gb-*"
for mod in $gbmods
do
insmod $mod
done
insmod /vendor/lib/modules/v4l2-hal.ko
start vendor.mods_camd

365
rootdir/bin/init.kernel.post_boot-lahaina.sh Executable file
View file

@ -0,0 +1,365 @@
#=============================================================================
# Copyright (c) 2020-2021 Qualcomm Technologies, Inc.
# All Rights Reserved.
# Confidential and Proprietary - Qualcomm Technologies, Inc.
#
# Copyright (c) 2009-2012, 2014-2019, The Linux Foundation. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# * Neither the name of The Linux Foundation nor
# the names of its contributors may be used to endorse or promote
# products derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#=============================================================================
function configure_zram_parameters() {
MemTotalStr=`cat /proc/meminfo | grep MemTotal`
MemTotal=${MemTotalStr:16:8}
low_ram=`getprop ro.config.low_ram`
# Zram disk - 75% for Go and < 2GB devices .
# For >2GB Non-Go devices, size = 50% of RAM size. Limit the size to 4GB.
# And enable lz4 zram compression for Go targets.
let RamSizeGB="( $MemTotal / 1048576 ) + 1"
diskSizeUnit=M
if [ $RamSizeGB -le 2 ]; then
let zRamSizeMB="( $RamSizeGB * 1024 ) * 3 / 4"
else
let zRamSizeMB="( $RamSizeGB * 1024 ) / 2"
fi
# use MB avoid 32 bit overflow
if [ $zRamSizeMB -gt 4096 ]; then
let zRamSizeMB=4096
fi
if [ "$low_ram" == "true" ]; then
echo lz4 > /sys/block/zram0/comp_algorithm
fi
if [ -f /sys/block/zram0/disksize ]; then
if [ -f /sys/block/zram0/use_dedup ]; then
echo 1 > /sys/block/zram0/use_dedup
fi
echo "$zRamSizeMB""$diskSizeUnit" > /sys/block/zram0/disksize
# ZRAM may use more memory than it saves if SLAB_STORE_USER
# debug option is enabled.
if [ -e /sys/kernel/slab/zs_handle ]; then
echo 0 > /sys/kernel/slab/zs_handle/store_user
fi
if [ -e /sys/kernel/slab/zspage ]; then
echo 0 > /sys/kernel/slab/zspage/store_user
fi
mkswap /dev/block/zram0
swapon /dev/block/zram0 -p 32758
fi
}
function configure_read_ahead_kb_values() {
MemTotalStr=`cat /proc/meminfo | grep MemTotal`
MemTotal=${MemTotalStr:16:8}
dmpts=$(ls /sys/block/*/queue/read_ahead_kb | grep -e dm -e mmc)
# Set 128 for <= 3GB &
# set 512 for >= 4GB targets.
if [ $MemTotal -le 3145728 ]; then
ra_kb=128
else
ra_kb=512
fi
if [ -f /sys/block/mmcblk0/bdi/read_ahead_kb ]; then
echo $ra_kb > /sys/block/mmcblk0/bdi/read_ahead_kb
fi
if [ -f /sys/block/mmcblk0rpmb/bdi/read_ahead_kb ]; then
echo $ra_kb > /sys/block/mmcblk0rpmb/bdi/read_ahead_kb
fi
for dm in $dmpts; do
echo $ra_kb > $dm
done
}
function configure_memory_parameters() {
# Set Memory parameters.
#
# Set per_process_reclaim tuning parameters
# All targets will use vmpressure range 50-70,
# All targets will use 512 pages swap size.
#
# Set Low memory killer minfree parameters
# 32 bit Non-Go, all memory configurations will use 15K series
# 32 bit Go, all memory configurations will use uLMK + Memcg
# 64 bit will use Google default LMK series.
#
# Set ALMK parameters (usually above the highest minfree values)
# vmpressure_file_min threshold is always set slightly higher
# than LMK minfree's last bin value for all targets. It is calculated as
# vmpressure_file_min = (last bin - second last bin ) + last bin
#
# Set allocstall_threshold to 0 for all targets.
#
configure_zram_parameters
configure_read_ahead_kb_values
echo 0 > /proc/sys/vm/page-cluster
echo 100 > /proc/sys/vm/swappiness
}
rev=`cat /sys/devices/soc0/revision`
ddr_type=`od -An -tx /proc/device-tree/memory/ddr_device_type`
ddr_type4="07"
ddr_type5="08"
# Core control parameters for gold
echo 2 > /sys/devices/system/cpu/cpu4/core_ctl/min_cpus
echo 60 > /sys/devices/system/cpu/cpu4/core_ctl/busy_up_thres
echo 30 > /sys/devices/system/cpu/cpu4/core_ctl/busy_down_thres
echo 100 > /sys/devices/system/cpu/cpu4/core_ctl/offline_delay_ms
echo 3 > /sys/devices/system/cpu/cpu4/core_ctl/task_thres
# Core control parameters for gold+
echo 0 > /sys/devices/system/cpu/cpu7/core_ctl/min_cpus
echo 60 > /sys/devices/system/cpu/cpu7/core_ctl/busy_up_thres
echo 30 > /sys/devices/system/cpu/cpu7/core_ctl/busy_down_thres
echo 100 > /sys/devices/system/cpu/cpu7/core_ctl/offline_delay_ms
echo 1 > /sys/devices/system/cpu/cpu7/core_ctl/task_thres
# Controls how many more tasks should be eligible to run on gold CPUs
# w.r.t number of gold CPUs available to trigger assist (max number of
# tasks eligible to run on previous cluster minus number of CPUs in
# the previous cluster).
#
# Setting to 1 by default which means there should be at least
# 4 tasks eligible to run on gold cluster (tasks running on gold cores
# plus misfit tasks on silver cores) to trigger assitance from gold+.
echo 1 > /sys/devices/system/cpu/cpu7/core_ctl/nr_prev_assist_thresh
# Disable Core control on silver
echo 0 > /sys/devices/system/cpu/cpu0/core_ctl/enable
# Setting b.L scheduler parameters
echo 95 95 > /proc/sys/kernel/sched_upmigrate
echo 85 85 > /proc/sys/kernel/sched_downmigrate
echo 100 > /proc/sys/kernel/sched_group_upmigrate
echo 85 > /proc/sys/kernel/sched_group_downmigrate
echo 1 > /proc/sys/kernel/sched_walt_rotate_big_tasks
echo 400000000 > /proc/sys/kernel/sched_coloc_downmigrate_ns
echo 39000000 39000000 39000000 39000000 39000000 39000000 39000000 5000000 > /proc/sys/kernel/sched_coloc_busy_hyst_cpu_ns
echo 240 > /proc/sys/kernel/sched_coloc_busy_hysteresis_enable_cpus
echo 10 10 10 10 10 10 10 95 > /proc/sys/kernel/sched_coloc_busy_hyst_cpu_busy_pct
# set the threshold for low latency task boost feature which prioritize
# binder activity tasks
echo 325 > /proc/sys/kernel/walt_low_latency_task_threshold
# cpuset parameters
echo 0-3 > /dev/cpuset/background/cpus
echo 0-3 > /dev/cpuset/system-background/cpus
# Turn off scheduler boost at the end
echo 0 > /proc/sys/kernel/sched_boost
# configure governor settings for silver cluster
echo "schedutil" > /sys/devices/system/cpu/cpufreq/policy0/scaling_governor
echo 0 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/down_rate_limit_us
echo 0 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/up_rate_limit_us
if [ $rev == "1.0" ]; then
echo 1190400 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/hispeed_freq
else
echo 1209600 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/hispeed_freq
fi
echo 691200 > /sys/devices/system/cpu/cpufreq/policy0/scaling_min_freq
echo 1 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/pl
# configure input boost settings
if [ $rev == "1.0" ]; then
echo "0:1382800" > /sys/devices/system/cpu/cpu_boost/input_boost_freq
else
echo "0:1305600" > /sys/devices/system/cpu/cpu_boost/input_boost_freq
fi
echo 120 > /sys/devices/system/cpu/cpu_boost/input_boost_ms
# configure governor settings for gold cluster
echo "schedutil" > /sys/devices/system/cpu/cpufreq/policy4/scaling_governor
echo 0 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/down_rate_limit_us
echo 0 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/up_rate_limit_us
if [ $rev == "1.0" ]; then
echo 1497600 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/hispeed_freq
else
echo 1555200 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/hispeed_freq
fi
echo 1 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/pl
# configure governor settings for gold+ cluster
echo "schedutil" > /sys/devices/system/cpu/cpufreq/policy7/scaling_governor
echo 0 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/down_rate_limit_us
echo 0 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/up_rate_limit_us
if [ $rev == "1.0" ]; then
echo 1536000 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/hispeed_freq
else
echo 1670400 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/hispeed_freq
fi
echo 1 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/pl
# configure bus-dcvs
for device in /sys/devices/platform/soc
do
for cpubw in $device/*cpu-cpu-llcc-bw/devfreq/*cpu-cpu-llcc-bw
do
cat $cpubw/available_frequencies | cut -d " " -f 1 > $cpubw/min_freq
echo "4577 7110 9155 12298 14236 15258" > $cpubw/bw_hwmon/mbps_zones
echo 4 > $cpubw/bw_hwmon/sample_ms
echo 80 > $cpubw/bw_hwmon/io_percent
echo 20 > $cpubw/bw_hwmon/hist_memory
echo 10 > $cpubw/bw_hwmon/hyst_length
echo 30 > $cpubw/bw_hwmon/down_thres
echo 0 > $cpubw/bw_hwmon/guard_band_mbps
echo 250 > $cpubw/bw_hwmon/up_scale
echo 1600 > $cpubw/bw_hwmon/idle_mbps
echo 12298 > $cpubw/max_freq
echo 40 > $cpubw/polling_interval
done
for llccbw in $device/*cpu-llcc-ddr-bw/devfreq/*cpu-llcc-ddr-bw
do
cat $llccbw/available_frequencies | cut -d " " -f 1 > $llccbw/min_freq
if [ ${ddr_type:4:2} == $ddr_type4 ]; then
echo "1720 2086 2929 3879 5931 6515 8136" > $llccbw/bw_hwmon/mbps_zones
elif [ ${ddr_type:4:2} == $ddr_type5 ]; then
echo "1720 2086 2929 3879 6515 7980 12191" > $llccbw/bw_hwmon/mbps_zones
fi
echo 4 > $llccbw/bw_hwmon/sample_ms
echo 80 > $llccbw/bw_hwmon/io_percent
echo 20 > $llccbw/bw_hwmon/hist_memory
echo 10 > $llccbw/bw_hwmon/hyst_length
echo 30 > $llccbw/bw_hwmon/down_thres
echo 0 > $llccbw/bw_hwmon/guard_band_mbps
echo 250 > $llccbw/bw_hwmon/up_scale
echo 1600 > $llccbw/bw_hwmon/idle_mbps
echo 6515 > $llccbw/max_freq
echo 40 > $llccbw/polling_interval
done
for l3bw in $device/*snoop-l3-bw/devfreq/*snoop-l3-bw
do
cat $l3bw/available_frequencies | cut -d " " -f 1 > $l3bw/min_freq
echo 4 > $l3bw/bw_hwmon/sample_ms
echo 10 > $l3bw/bw_hwmon/io_percent
echo 20 > $l3bw/bw_hwmon/hist_memory
echo 10 > $l3bw/bw_hwmon/hyst_length
echo 0 > $l3bw/bw_hwmon/down_thres
echo 0 > $l3bw/bw_hwmon/guard_band_mbps
echo 0 > $l3bw/bw_hwmon/up_scale
echo 1600 > $l3bw/bw_hwmon/idle_mbps
echo 9155 > $l3bw/max_freq
echo 40 > $l3bw/polling_interval
done
# configure mem_latency settings for LLCC and DDR scaling and qoslat
for memlat in $device/*lat/devfreq/*lat
do
cat $memlat/available_frequencies | cut -d " " -f 1 > $memlat/min_freq
echo 8 > $memlat/polling_interval
echo 400 > $memlat/mem_latency/ratio_ceil
done
# configure compute settings for gold latfloor
for latfloor in $device/*cpu4-cpu*latfloor/devfreq/*cpu4-cpu*latfloor
do
cat $latfloor/available_frequencies | cut -d " " -f 1 > $latfloor/min_freq
echo 8 > $latfloor/polling_interval
done
# configure mem_latency settings for prime latfloor
for latfloor in $device/*cpu7-cpu*latfloor/devfreq/*cpu7-cpu*latfloor
do
cat $latfloor/available_frequencies | cut -d " " -f 1 > $latfloor/min_freq
echo 8 > $latfloor/polling_interval
echo 25000 > $latfloor/mem_latency/ratio_ceil
done
# CPU4 L3 ratio ceil
for l3gold in $device/*cpu4-cpu-l3-lat/devfreq/*cpu4-cpu-l3-lat
do
echo 4000 > $l3gold/mem_latency/ratio_ceil
done
# CPU5 L3 ratio ceil
for l3gold in $device/*cpu5-cpu-l3-lat/devfreq/*cpu5-cpu-l3-lat
do
echo 4000 > $l3gold/mem_latency/ratio_ceil
done
# CPU6 L3 ratio ceil
for l3gold in $device/*cpu6-cpu-l3-lat/devfreq/*cpu6-cpu-l3-lat
do
echo 4000 > $l3gold/mem_latency/ratio_ceil
done
# prime L3 ratio ceil
for l3prime in $device/*cpu7-cpu-l3-lat/devfreq/*cpu7-cpu-l3-lat
do
echo 20000 > $l3prime/mem_latency/ratio_ceil
done
# qoslat ratio ceil
for qoslat in $device/*qoslat/devfreq/*qoslat
do
echo 50 > $qoslat/mem_latency/ratio_ceil
done
done
echo N > /sys/module/lpm_levels/parameters/sleep_disabled
echo s2idle > /sys/power/mem_sleep
configure_memory_parameters
# Let kernel know our image version/variant/crm_version
if [ -f /sys/devices/soc0/select_image ]; then
image_version="10:"
image_version+=`getprop ro.build.id`
image_version+=":"
image_version+=`getprop ro.build.version.incremental`
image_variant=`getprop ro.product.name`
image_variant+="-"
image_variant+=`getprop ro.build.type`
oem_version=`getprop ro.build.version.codename`
echo 10 > /sys/devices/soc0/select_image
echo $image_version > /sys/devices/soc0/image_version
echo $image_variant > /sys/devices/soc0/image_variant
echo $oem_version > /sys/devices/soc0/image_crm_version
fi
# Change console log level as per console config property
console_config=`getprop persist.vendor.console.silent.config`
case "$console_config" in
"1")
echo "Enable console config to $console_config"
echo 0 > /proc/sys/kernel/printk
;;
*)
echo "Enable console config to $console_config"
;;
esac
setprop vendor.post_boot.parsed 1

388
rootdir/bin/init.kernel.post_boot-shima.sh Executable file
View file

@ -0,0 +1,388 @@
#=============================================================================
# Copyright (c) 2020 Qualcomm Technologies, Inc.
# All Rights Reserved.
# Confidential and Proprietary - Qualcomm Technologies, Inc.
#
# Copyright (c) 2009-2012, 2014-2019, The Linux Foundation. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# * Neither the name of The Linux Foundation nor
# the names of its contributors may be used to endorse or promote
# products derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#=============================================================================
function configure_zram_parameters() {
MemTotalStr=`cat /proc/meminfo | grep MemTotal`
MemTotal=${MemTotalStr:16:8}
low_ram=`getprop ro.config.low_ram`
# Zram disk - 75% for Go and < 2GB devices .
# For >2GB Non-Go devices, size = 50% of RAM size. Limit the size to 4GB.
# And enable lz4 zram compression for Go targets.
let RamSizeGB="( $MemTotal / 1048576 ) + 1"
diskSizeUnit=M
if [ $RamSizeGB -le 2 ]; then
let zRamSizeMB="( $RamSizeGB * 1024 ) * 3 / 4"
else
let zRamSizeMB="( $RamSizeGB * 1024 ) / 2"
fi
# use MB avoid 32 bit overflow
if [ $zRamSizeMB -gt 4096 ]; then
let zRamSizeMB=4096
fi
if [ "$low_ram" == "true" ]; then
echo lz4 > /sys/block/zram0/comp_algorithm
fi
if [ -f /sys/block/zram0/disksize ]; then
if [ -f /sys/block/zram0/use_dedup ]; then
echo 1 > /sys/block/zram0/use_dedup
fi
echo "$zRamSizeMB""$diskSizeUnit" > /sys/block/zram0/disksize
# ZRAM may use more memory than it saves if SLAB_STORE_USER
# debug option is enabled.
if [ -e /sys/kernel/slab/zs_handle ]; then
echo 0 > /sys/kernel/slab/zs_handle/store_user
fi
if [ -e /sys/kernel/slab/zspage ]; then
echo 0 > /sys/kernel/slab/zspage/store_user
fi
mkswap /dev/block/zram0
swapon /dev/block/zram0 -p 32758
fi
}
function configure_read_ahead_kb_values() {
MemTotalStr=`cat /proc/meminfo | grep MemTotal`
MemTotal=${MemTotalStr:16:8}
dmpts=$(ls /sys/block/*/queue/read_ahead_kb | grep -e dm -e mmc)
# Set 128 for <= 3GB &
# set 512 for >= 4GB targets.
if [ $MemTotal -le 3145728 ]; then
ra_kb=128
else
ra_kb=512
fi
if [ -f /sys/block/mmcblk0/bdi/read_ahead_kb ]; then
echo $ra_kb > /sys/block/mmcblk0/bdi/read_ahead_kb
fi
if [ -f /sys/block/mmcblk0rpmb/bdi/read_ahead_kb ]; then
echo $ra_kb > /sys/block/mmcblk0rpmb/bdi/read_ahead_kb
fi
for dm in $dmpts; do
echo $ra_kb > $dm
done
}
function configure_memory_parameters() {
# Set Memory parameters.
#
# Set per_process_reclaim tuning parameters
# All targets will use vmpressure range 50-70,
# All targets will use 512 pages swap size.
#
# Set Low memory killer minfree parameters
# 32 bit Non-Go, all memory configurations will use 15K series
# 32 bit Go, all memory configurations will use uLMK + Memcg
# 64 bit will use Google default LMK series.
#
# Set ALMK parameters (usually above the highest minfree values)
# vmpressure_file_min threshold is always set slightly higher
# than LMK minfree's last bin value for all targets. It is calculated as
# vmpressure_file_min = (last bin - second last bin ) + last bin
#
# Set allocstall_threshold to 0 for all targets.
#
ProductName=`getprop ro.product.name`
configure_zram_parameters
configure_read_ahead_kb_values
echo 0 > /proc/sys/vm/page-cluster
echo 100 > /proc/sys/vm/swappiness
# Disable wsf beacause we are using efk.
# wsf Range : 1..1000. So set to bare minimum value 1.
echo 1 > /proc/sys/vm/watermark_scale_factor
#Spawn 2 kswapd threads which can help in fast reclaiming of pages
echo 2 > /proc/sys/vm/kswapd_threads
}
rev=`cat /sys/devices/soc0/revision`
ddr_type=`od -An -tx /proc/device-tree/memory/ddr_device_type`
ddr_type4="07"
ddr_type5="08"
# Core control parameters for gold
echo 2 > /sys/devices/system/cpu/cpu4/core_ctl/min_cpus
echo 60 > /sys/devices/system/cpu/cpu4/core_ctl/busy_up_thres
echo 30 > /sys/devices/system/cpu/cpu4/core_ctl/busy_down_thres
echo 100 > /sys/devices/system/cpu/cpu4/core_ctl/offline_delay_ms
echo 3 > /sys/devices/system/cpu/cpu4/core_ctl/task_thres
# Core control parameters for gold+
echo 0 > /sys/devices/system/cpu/cpu7/core_ctl/min_cpus
echo 60 > /sys/devices/system/cpu/cpu7/core_ctl/busy_up_thres
echo 30 > /sys/devices/system/cpu/cpu7/core_ctl/busy_down_thres
echo 100 > /sys/devices/system/cpu/cpu7/core_ctl/offline_delay_ms
echo 1 > /sys/devices/system/cpu/cpu7/core_ctl/task_thres
# Controls how many more tasks should be eligible to run on gold CPUs
# w.r.t number of gold CPUs available to trigger assist (max number of
# tasks eligible to run on previous cluster minus number of CPUs in
# the previous cluster).
#
# Setting to 1 by default which means there should be at least
# 4 tasks eligible to run on gold cluster (tasks running on gold cores
# plus misfit tasks on silver cores) to trigger assitance from gold+.
echo 1 > /sys/devices/system/cpu/cpu7/core_ctl/nr_prev_assist_thresh
# Disable Core control on silver
echo 0 > /sys/devices/system/cpu/cpu0/core_ctl/enable
# Setting b.L scheduler parameters
echo 71 95 > /proc/sys/kernel/sched_upmigrate
echo 65 85 > /proc/sys/kernel/sched_downmigrate
echo 100 > /proc/sys/kernel/sched_group_upmigrate
echo 85 > /proc/sys/kernel/sched_group_downmigrate
echo 1 > /proc/sys/kernel/sched_walt_rotate_big_tasks
echo 0 > /proc/sys/kernel/sched_coloc_busy_hysteresis_enable_cpus
# cpuset parameters
echo 0-3 > /dev/cpuset/background/cpus
echo 0-3 > /dev/cpuset/system-background/cpus
# Turn off scheduler boost at the end
echo 0 > /proc/sys/kernel/sched_boost
# configure governor settings for silver cluster
echo "schedutil" > /sys/devices/system/cpu/cpufreq/policy0/scaling_governor
echo 0 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/down_rate_limit_us
echo 0 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/up_rate_limit_us
echo 1171200 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/hispeed_freq
echo 691200 > /sys/devices/system/cpu/cpufreq/policy0/scaling_min_freq
echo 0 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/pl
# configure input boost settings
echo "0:1171200" > /sys/devices/system/cpu/cpu_boost/input_boost_freq
echo 120 > /sys/devices/system/cpu/cpu_boost/input_boost_ms
# configure governor settings for gold cluster
echo "schedutil" > /sys/devices/system/cpu/cpufreq/policy4/scaling_governor
echo 0 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/down_rate_limit_us
echo 0 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/up_rate_limit_us
echo 1209000 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/hispeed_freq
echo 691200 > /sys/devices/system/cpu/cpufreq/policy4/scaling_min_freq
echo 85 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/hispeed_load
echo -6 > /sys/devices/system/cpu/cpu4/sched_load_boost
echo -6 > /sys/devices/system/cpu/cpu5/sched_load_boost
echo -6 > /sys/devices/system/cpu/cpu6/sched_load_boost
echo 0 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/rtg_boost_freq
echo 0 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/pl
# configure governor settings for gold+ cluster
echo "schedutil" > /sys/devices/system/cpu/cpufreq/policy7/scaling_governor
echo 0 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/down_rate_limit_us
echo 0 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/up_rate_limit_us
echo 1267000 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/hispeed_freq
echo 806400 > /sys/devices/system/cpu/cpufreq/policy7/scaling_min_freq
echo 85 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/hispeed_load
echo -6 > /sys/devices/system/cpu/cpu7/sched_load_boost
echo 0 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/rtg_boost_freq
echo 0 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/pl
# colocation V3 settings
echo 691200 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/rtg_boost_freq
echo 51 > /proc/sys/kernel/sched_min_task_util_for_boost
echo 35 > /proc/sys/kernel/sched_min_task_util_for_colocation
echo 20000000 > /proc/sys/kernel/sched_task_unfilter_period
# Enable conservative pl
echo 1 > /proc/sys/kernel/sched_conservative_pl
# configure bus-dcvs
for device in /sys/devices/platform/soc
do
for cpubw in $device/*cpu-cpu-llcc-bw/devfreq/*cpu-cpu-llcc-bw
do
cat $cpubw/available_frequencies | cut -d " " -f 1 > $cpubw/min_freq
echo "2288 4577 7110 9155 12298 14236 15258" > $cpubw/bw_hwmon/mbps_zones
echo 4 > $cpubw/bw_hwmon/sample_ms
echo 68 > $cpubw/bw_hwmon/io_percent
echo 20 > $cpubw/bw_hwmon/hist_memory
echo 0 > $cpubw/bw_hwmon/hyst_length
echo 80 > $cpubw/bw_hwmon/down_thres
echo 0 > $cpubw/bw_hwmon/guard_band_mbps
echo 250 > $cpubw/bw_hwmon/up_scale
echo 1600 > $cpubw/bw_hwmon/idle_mbps
echo 40 > $cpubw/polling_interval
done
for llccbw in $device/*cpu-llcc-ddr-bw/devfreq/*cpu-llcc-ddr-bw
do
cat $llccbw/available_frequencies | cut -d " " -f 1 > $llccbw/min_freq
if [ ${ddr_type:4:2} == $ddr_type4 ]; then
echo "1144 1720 2086 2929 3879 5931 6515 8136" > $llccbw/bw_hwmon/mbps_zones
elif [ ${ddr_type:4:2} == $ddr_type5 ]; then
echo "1144 1720 2086 2929 3879 5931 6515 7980 12191" > $llccbw/bw_hwmon/mbps_zones
fi
echo 4 > $llccbw/bw_hwmon/sample_ms
echo 68 > $llccbw/bw_hwmon/io_percent
echo 20 > $llccbw/bw_hwmon/hist_memory
echo 0 > $llccbw/bw_hwmon/hyst_length
echo 80 > $llccbw/bw_hwmon/down_thres
echo 0 > $llccbw/bw_hwmon/guard_band_mbps
echo 250 > $llccbw/bw_hwmon/up_scale
echo 1600 > $llccbw/bw_hwmon/idle_mbps
echo 48 > $llccbw/polling_interval
done
for l3bw in $device/*snoop-l3-bw/devfreq/*snoop-l3-bw
do
cat $l3bw/available_frequencies | cut -d " " -f 1 > $l3bw/min_freq
echo 4 > $l3bw/bw_hwmon/sample_ms
echo 10 > $l3bw/bw_hwmon/io_percent
echo 20 > $l3bw/bw_hwmon/hist_memory
echo 10 > $l3bw/bw_hwmon/hyst_length
echo 0 > $l3bw/bw_hwmon/down_thres
echo 0 > $l3bw/bw_hwmon/guard_band_mbps
echo 0 > $l3bw/bw_hwmon/up_scale
echo 1600 > $l3bw/bw_hwmon/idle_mbps
echo 9155 > $l3bw/max_freq
echo 40 > $l3bw/polling_interval
done
# configure mem_latency settings for LLCC and DDR scaling and qoslat
for memlat in $device/*lat/devfreq/*lat
do
cat $memlat/available_frequencies | cut -d " " -f 1 > $memlat/min_freq
echo 8 > $memlat/polling_interval
echo 400 > $memlat/mem_latency/ratio_ceil
done
# configure compute settings for silver latfloor
for latfloor in $device/*cpu0-cpu*latfloor/devfreq/*cpu0-cpu*latfloor
do
cat $latfloor/available_frequencies | cut -d " " -f 1 > $latfloor/min_freq
echo 8 > $latfloor/polling_interval
done
# configure compute settings for gold latfloor
for latfloor in $device/*cpu4-cpu*latfloor/devfreq/*cpu4-cpu*latfloor
do
cat $latfloor/available_frequencies | cut -d " " -f 1 > $latfloor/min_freq
echo 8 > $latfloor/polling_interval
done
# configure mem_latency settings for prime latfloor
for latfloor in $device/*cpu7-cpu*latfloor/devfreq/*cpu7-cpu*latfloor
do
cat $latfloor/available_frequencies | cut -d " " -f 1 > $latfloor/min_freq
echo 8 > $latfloor/polling_interval
echo 25000 > $latfloor/mem_latency/ratio_ceil
done
# CPU4 L3 ratio ceil
for l3gold in $device/*cpu4-cpu-l3-lat/devfreq/*cpu4-cpu-l3-lat
do
echo 4000 > $l3gold/mem_latency/ratio_ceil
echo 25000 > $l3gold/mem_latency/wb_filter_ratio
echo 60 > $l3gold/mem_latency/wb_pct_thres
done
# CPU5 L3 ratio ceil
for l3gold in $device/*cpu5-cpu-l3-lat/devfreq/*cpu5-cpu-l3-lat
do
echo 4000 > $l3gold/mem_latency/ratio_ceil
echo 25000 > $l3gold/mem_latency/wb_filter_ratio
echo 60 > $l3gold/mem_latency/wb_pct_thres
done
# CPU6 L3 ratio ceil
for l3gold in $device/*cpu6-cpu-l3-lat/devfreq/*cpu6-cpu-l3-lat
do
echo 4000 > $l3gold/mem_latency/ratio_ceil
echo 25000 > $l3gold/mem_latency/wb_filter_ratio
echo 60 > $l3gold/mem_latency/wb_pct_thres
done
# prime L3 ratio ceil
for l3prime in $device/*cpu7-cpu-l3-lat/devfreq/*cpu7-cpu-l3-lat
do
echo 20000 > $l3prime/mem_latency/ratio_ceil
echo 25000 > $l3prime/mem_latency/wb_filter_ratio
echo 60 > $l3prime/mem_latency/wb_pct_thres
done
# qoslat ratio ceil
for qoslat in $device/*qoslat/devfreq/*qoslat
do
echo 50 > $qoslat/mem_latency/ratio_ceil
done
done
#Enable sleep and set s2idle as default suspend mode
echo N > /sys/module/lpm_levels/parameters/sleep_disabled
echo s2idle > /sys/power/mem_sleep
configure_memory_parameters
# Let kernel know our image version/variant/crm_version
if [ -f /sys/devices/soc0/select_image ]; then
image_version="10:"
image_version+=`getprop ro.build.id`
image_version+=":"
image_version+=`getprop ro.build.version.incremental`
image_variant=`getprop ro.product.name`
image_variant+="-"
image_variant+=`getprop ro.build.type`
oem_version=`getprop ro.build.version.codename`
echo 10 > /sys/devices/soc0/select_image
echo $image_version > /sys/devices/soc0/image_version
echo $image_variant > /sys/devices/soc0/image_variant
echo $oem_version > /sys/devices/soc0/image_crm_version
fi
# Change console log level as per console config property
console_config=`getprop persist.console.silent.config`
case "$console_config" in
"1")
echo "Enable console config to $console_config"
echo 0 > /proc/sys/kernel/printk
;;
*)
echo "Enable console config to $console_config"
;;
esac
setprop vendor.post_boot.parsed 1

364
rootdir/bin/init.kernel.post_boot-yupik.sh Executable file
View file

@ -0,0 +1,364 @@
#=============================================================================
# Copyright (c) 2020-2021 Qualcomm Technologies, Inc.
# All Rights Reserved.
# Confidential and Proprietary - Qualcomm Technologies, Inc.
#
# Copyright (c) 2009-2012, 2014-2019, The Linux Foundation. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# * Neither the name of The Linux Foundation nor
# the names of its contributors may be used to endorse or promote
# products derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#=============================================================================
function configure_zram_parameters() {
# Moto yangbq2: Skip this if we are using zram from fstab.
using_zram_from_fstab=`getprop ro.boot.using_zram_from_fstab`
if [ "$using_zram_from_fstab" == "true" ]; then
return
fi
MemTotalStr=`cat /proc/meminfo | grep MemTotal`
MemTotal=${MemTotalStr:16:8}
low_ram=`getprop ro.config.low_ram`
# Zram disk - 75% for Go and < 2GB devices .
# For >2GB Non-Go devices, size = 50% of RAM size. Limit the size to 4GB.
# And enable lz4 zram compression for Go targets.
let RamSizeGB="( $MemTotal / 1048576 ) + 1"
diskSizeUnit=M
if [ $RamSizeGB -le 2 ]; then
let zRamSizeMB="( $RamSizeGB * 1024 ) * 3 / 4"
else
let zRamSizeMB="( $RamSizeGB * 1024 ) / 2"
fi
# use MB avoid 32 bit overflow
if [ $zRamSizeMB -gt 4096 ]; then
let zRamSizeMB=4096
fi
if [ "$low_ram" == "true" ]; then
echo lz4 > /sys/block/zram0/comp_algorithm
fi
if [ -f /sys/block/zram0/disksize ]; then
if [ -f /sys/block/zram0/use_dedup ]; then
echo 1 > /sys/block/zram0/use_dedup
fi
echo "$zRamSizeMB""$diskSizeUnit" > /sys/block/zram0/disksize
# ZRAM may use more memory than it saves if SLAB_STORE_USER
# debug option is enabled.
if [ -e /sys/kernel/slab/zs_handle ]; then
echo 0 > /sys/kernel/slab/zs_handle/store_user
fi
if [ -e /sys/kernel/slab/zspage ]; then
echo 0 > /sys/kernel/slab/zspage/store_user
fi
mkswap /dev/block/zram0
swapon /dev/block/zram0 -p 32758
fi
}
function configure_read_ahead_kb_values() {
MemTotalStr=`cat /proc/meminfo | grep MemTotal`
MemTotal=${MemTotalStr:16:8}
dmpts=$(ls /sys/block/*/queue/read_ahead_kb | grep -e dm -e mmc)
# Set 128 for <= 3GB &
# set 512 for >= 4GB targets.
if [ $MemTotal -le 3145728 ]; then
ra_kb=128
else
ra_kb=512
fi
if [ -f /sys/block/mmcblk0/bdi/read_ahead_kb ]; then
echo $ra_kb > /sys/block/mmcblk0/bdi/read_ahead_kb
fi
if [ -f /sys/block/mmcblk0rpmb/bdi/read_ahead_kb ]; then
echo $ra_kb > /sys/block/mmcblk0rpmb/bdi/read_ahead_kb
fi
for dm in $dmpts; do
echo $ra_kb > $dm
done
}
function configure_memory_parameters() {
# Set Memory parameters.
#
# Set per_process_reclaim tuning parameters
# All targets will use vmpressure range 50-70,
# All targets will use 512 pages swap size.
#
# Set Low memory killer minfree parameters
# 32 bit Non-Go, all memory configurations will use 15K series
# 32 bit Go, all memory configurations will use uLMK + Memcg
# 64 bit will use Google default LMK series.
#
# Set ALMK parameters (usually above the highest minfree values)
# vmpressure_file_min threshold is always set slightly higher
# than LMK minfree's last bin value for all targets. It is calculated as
# vmpressure_file_min = (last bin - second last bin ) + last bin
#
# Set allocstall_threshold to 0 for all targets.
#
ProductName=`getprop ro.product.name`
configure_zram_parameters
configure_read_ahead_kb_values
echo 100 > /proc/sys/vm/swappiness
# Disable wsf beacause we are using efk.
# wsf Range : 1..1000. So set to bare minimum value 1.
echo 1 > /proc/sys/vm/watermark_scale_factor
#Spawn 2 kswapd threads which can help in fast reclaiming of pages
#yangbq2 change kswapd threads to one thread
echo 1 > /proc/sys/vm/kswapd_threads
#yangbq2 disable watermark boost
echo 0 > /proc/sys/vm/watermark_boost_factor
}
rev=`cat /sys/devices/soc0/revision`
ddr_type=`od -An -tx /proc/device-tree/memory/ddr_device_type`
ddr_type4="07"
ddr_type5="08"
# Core control parameters for gold
# Prefer CPU4 for isolation based on the thermal characteristics.
echo 1 0 0 > /sys/devices/system/cpu/cpu4/core_ctl/not_preferred
echo 2 > /sys/devices/system/cpu/cpu4/core_ctl/min_cpus
echo 60 > /sys/devices/system/cpu/cpu4/core_ctl/busy_up_thres
echo 30 > /sys/devices/system/cpu/cpu4/core_ctl/busy_down_thres
echo 100 > /sys/devices/system/cpu/cpu4/core_ctl/offline_delay_ms
echo 3 > /sys/devices/system/cpu/cpu4/core_ctl/task_thres
# Core control parameters for gold+
echo 0 > /sys/devices/system/cpu/cpu7/core_ctl/min_cpus
echo 60 > /sys/devices/system/cpu/cpu7/core_ctl/busy_up_thres
echo 30 > /sys/devices/system/cpu/cpu7/core_ctl/busy_down_thres
echo 100 > /sys/devices/system/cpu/cpu7/core_ctl/offline_delay_ms
echo 1 > /sys/devices/system/cpu/cpu7/core_ctl/task_thres
# Controls how many more tasks should be eligible to run on gold CPUs
# w.r.t number of gold CPUs available to trigger assist (max number of
# tasks eligible to run on previous cluster minus number of CPUs in
# the previous cluster).
#
# Setting to 1 by default which means there should be at least
# 4 tasks eligible to run on gold cluster (tasks running on gold cores
# plus misfit tasks on silver cores) to trigger assitance from gold+.
echo 1 > /sys/devices/system/cpu/cpu7/core_ctl/nr_prev_assist_thresh
# Disable Core control on silver
echo 0 > /sys/devices/system/cpu/cpu0/core_ctl/enable
# Setting b.L scheduler parameters
echo 71 95 > /proc/sys/kernel/sched_upmigrate
echo 65 85 > /proc/sys/kernel/sched_downmigrate
echo 100 > /proc/sys/kernel/sched_group_upmigrate
echo 85 > /proc/sys/kernel/sched_group_downmigrate
echo 1 > /proc/sys/kernel/sched_walt_rotate_big_tasks
echo 0 > /proc/sys/kernel/sched_coloc_busy_hysteresis_enable_cpus
# cpuset parameters
echo 0-3 > /dev/cpuset/background/cpus
echo 0-3 > /dev/cpuset/system-background/cpus
# Turn off scheduler boost at the end
echo 0 > /proc/sys/kernel/sched_boost
# configure governor settings for silver cluster
echo "schedutil" > /sys/devices/system/cpu/cpufreq/policy0/scaling_governor
echo 0 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/down_rate_limit_us
echo 0 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/up_rate_limit_us
echo 1152000 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/hispeed_freq
echo 691200 > /sys/devices/system/cpu/cpufreq/policy0/scaling_min_freq
echo 0 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/pl
# configure input boost settings
echo "0:1152000" > /sys/devices/system/cpu/cpu_boost/input_boost_freq
echo 120 > /sys/devices/system/cpu/cpu_boost/input_boost_ms
# configure governor settings for gold cluster
echo "schedutil" > /sys/devices/system/cpu/cpufreq/policy4/scaling_governor
echo 0 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/down_rate_limit_us
echo 0 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/up_rate_limit_us
echo 1228800 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/hispeed_freq
echo 691200 > /sys/devices/system/cpu/cpufreq/policy4/scaling_min_freq
echo 85 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/hispeed_load
echo -6 > /sys/devices/system/cpu/cpu4/sched_load_boost
echo -6 > /sys/devices/system/cpu/cpu5/sched_load_boost
echo -6 > /sys/devices/system/cpu/cpu6/sched_load_boost
echo 0 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/rtg_boost_freq
echo 0 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/pl
# configure governor settings for gold+ cluster
echo "schedutil" > /sys/devices/system/cpu/cpufreq/policy7/scaling_governor
echo 0 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/down_rate_limit_us
echo 0 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/up_rate_limit_us
echo 1324800 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/hispeed_freq
echo 806400 > /sys/devices/system/cpu/cpufreq/policy7/scaling_min_freq
echo 85 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/hispeed_load
echo -6 > /sys/devices/system/cpu/cpu7/sched_load_boost
echo 0 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/rtg_boost_freq
echo 0 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/pl
# colocation V3 settings
echo 691200 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/rtg_boost_freq
echo 51 > /proc/sys/kernel/sched_min_task_util_for_boost
echo 35 > /proc/sys/kernel/sched_min_task_util_for_colocation
echo 20000000 > /proc/sys/kernel/sched_task_unfilter_period
# Enable conservative pl
echo 1 > /proc/sys/kernel/sched_conservative_pl
# configure RIMPS for L3 DCVS
for c0_rimps_l3 in /sys/devices/system/cpu/memlat/c0_memlat/cpu0-cpu-l3-lat
do
cat $c0_rimps_l3/available_frequencies | cut -d " " -f 1 > $c0_rimps_l3/min_freq
echo 400 > $c0_rimps_l3/ratio_ceil
echo 3 > $c0_rimps_l3/sample_ms
done
for c4_rimps_l3 in /sys/devices/system/cpu/memlat/c4_memlat/cpu4-cpu-l3-lat
do
cat $c4_rimps_l3/available_frequencies | cut -d " " -f 1 > $c4_rimps_l3/min_freq
echo 4000 > $c4_rimps_l3/ratio_ceil
echo 3 > $c4_rimps_l3/sample_ms
echo 60 > $c4_rimps_l3/l2wb_pct
echo 25000 > $c4_rimps_l3/l2wb_filter
done
for c7_rimps_l3 in /sys/devices/system/cpu/memlat/c7_memlat/cpu7-cpu-l3-lat
do
cat $c7_rimps_l3/available_frequencies | cut -d " " -f 1 > $c7_rimps_l3/min_freq
echo 20000 > $c7_rimps_l3/ratio_ceil
echo 3 > $c7_rimps_l3/sample_ms
echo 60 > $c7_rimps_l3/l2wb_pct
echo 25000 > $c7_rimps_l3/l2wb_filter
done
# configure bus-dcvs
for device in /sys/devices/platform/soc
do
for cpubw in $device/*cpu-cpu-llcc-bw/devfreq/*cpu-cpu-llcc-bw
do
cat $cpubw/available_frequencies | cut -d " " -f 1 > $cpubw/min_freq
echo "2288 4577 7110 9155 12298 14236 15258" > $cpubw/bw_hwmon/mbps_zones
echo 4 > $cpubw/bw_hwmon/sample_ms
echo 68 > $cpubw/bw_hwmon/io_percent
echo 20 > $cpubw/bw_hwmon/hist_memory
echo 0 > $cpubw/bw_hwmon/hyst_length
echo 80 > $cpubw/bw_hwmon/down_thres
echo 0 > $cpubw/bw_hwmon/guard_band_mbps
echo 250 > $cpubw/bw_hwmon/up_scale
echo 1600 > $cpubw/bw_hwmon/idle_mbps
echo 40 > $cpubw/polling_interval
done
for llccbw in $device/*cpu-llcc-ddr-bw/devfreq/*cpu-llcc-ddr-bw
do
cat $llccbw/available_frequencies | cut -d " " -f 1 > $llccbw/min_freq
if [ ${ddr_type:4:2} == $ddr_type4 ]; then
echo "1144 1720 2086 2929 3879 5931 6515 8136" > $llccbw/bw_hwmon/mbps_zones
elif [ ${ddr_type:4:2} == $ddr_type5 ]; then
echo "1144 1720 2086 2929 3879 5931 6515 7980 12191" > $llccbw/bw_hwmon/mbps_zones
fi
echo 4 > $llccbw/bw_hwmon/sample_ms
echo 68 > $llccbw/bw_hwmon/io_percent
echo 20 > $llccbw/bw_hwmon/hist_memory
echo 0 > $llccbw/bw_hwmon/hyst_length
echo 80 > $llccbw/bw_hwmon/down_thres
echo 0 > $llccbw/bw_hwmon/guard_band_mbps
echo 250 > $llccbw/bw_hwmon/up_scale
echo 1600 > $llccbw/bw_hwmon/idle_mbps
echo 48 > $llccbw/polling_interval
done
for l3bw in $device/*snoop-l3-bw/devfreq/*snoop-l3-bw
do
cat $l3bw/available_frequencies | cut -d " " -f 1 > $l3bw/min_freq
echo 4 > $l3bw/bw_hwmon/sample_ms
echo 10 > $l3bw/bw_hwmon/io_percent
echo 20 > $l3bw/bw_hwmon/hist_memory
echo 10 > $l3bw/bw_hwmon/hyst_length
echo 0 > $l3bw/bw_hwmon/down_thres
echo 0 > $l3bw/bw_hwmon/guard_band_mbps
echo 0 > $l3bw/bw_hwmon/up_scale
echo 1600 > $l3bw/bw_hwmon/idle_mbps
echo 9155 > $l3bw/max_freq
echo 40 > $l3bw/polling_interval
done
# configure mem_latency settings for LLCC and DDR scaling and qoslat
for memlat in $device/*lat/devfreq/*lat
do
cat $memlat/available_frequencies | cut -d " " -f 1 > $memlat/min_freq
echo 8 > $memlat/polling_interval
echo 400 > $memlat/mem_latency/ratio_ceil
done
# configure compute settings for silver latfloor
for latfloor in $device/*cpu0-cpu*latfloor/devfreq/*cpu0-cpu*latfloor
do
cat $latfloor/available_frequencies | cut -d " " -f 1 > $latfloor/min_freq
echo 8 > $latfloor/polling_interval
done
# configure compute settings for gold latfloor
for latfloor in $device/*cpu4-cpu*latfloor/devfreq/*cpu4-cpu*latfloor
do
cat $latfloor/available_frequencies | cut -d " " -f 1 > $latfloor/min_freq
echo 8 > $latfloor/polling_interval
done
# configure mem_latency settings for prime latfloor
for latfloor in $device/*cpu7-cpu*latfloor/devfreq/*cpu7-cpu*latfloor
do
cat $latfloor/available_frequencies | cut -d " " -f 1 > $latfloor/min_freq
echo 8 > $latfloor/polling_interval
echo 25000 > $latfloor/mem_latency/ratio_ceil
done
# qoslat ratio ceil
for qoslat in $device/*qoslat/devfreq/*qoslat
do
echo 50 > $qoslat/mem_latency/ratio_ceil
done
done
#Enable sleep and set s2idle as default suspend mode
echo N > /sys/module/lpm_levels/parameters/sleep_disabled
echo s2idle > /sys/power/mem_sleep
configure_memory_parameters
setprop vendor.post_boot.parsed 1

52
rootdir/bin/init.kernel.post_boot.sh Executable file
View file

@ -0,0 +1,52 @@
#=============================================================================
# Copyright (c) 2019-2021 Qualcomm Technologies, Inc.
# All Rights Reserved.
# Confidential and Proprietary - Qualcomm Technologies, Inc.
#
# Copyright (c) 2009-2012, 2014-2019, The Linux Foundation. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# * Neither the name of The Linux Foundation nor
# the names of its contributors may be used to endorse or promote
# products derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#=============================================================================
if [ -f /sys/devices/soc0/soc_id ]; then
platformid=`cat /sys/devices/soc0/soc_id`
fi
case "$platformid" in
"415"|"439"|"456"|"501"|"502")
/vendor/bin/sh /vendor/bin/init.kernel.post_boot-lahaina.sh
;;
"450")
/vendor/bin/sh /vendor/bin/init.kernel.post_boot-shima.sh
;;
"475"|"499"|"487"|"488"|"498"|"497"|"515")
/vendor/bin/sh /vendor/bin/init.kernel.post_boot-yupik.sh
;;
*)
echo "***WARNING***: Invalid SoC ID\n\t No postboot settings applied!!\n"
;;
esac

91
rootdir/bin/init.mmi.laser.sh
View file

@ -1,91 +0,0 @@
#!/vendor/bin/sh
scriptname=${0##*/}
dbg_on=1
debug()
{
[ $dbg_on ] && echo "Debug: $*"
}
notice()
{
echo "$*"
log -t "$scriptname" -p i "$*"
}
error_and_leave()
{
local err_msg
local err_code=$1
case $err_code in
1) err_msg="Error: No response";;
2) err_msg="Error: Skip to overwrite xtalk and offset data in factory mode";;
3) err_msg="Error: Calibration data file $2 does not exist";;
4) err_msg="Error: Calibration sysfs path $2 does not show up";;
esac
notice "$err_msg"
exit $err_code
}
# Change laser sysfs file ownership
laser_class_path=/sys/devices/virtual/laser
laser_product_string=$(ls $laser_class_path)
laser_product_path=$laser_class_path/$laser_product_string
for laser_file in $laser_product_path/*; do
if [ -f "$laser_file" ]; then
chown root:system $laser_file
fi
done
if [ ! -d $laser_product_path ]; then
error_and_leave 4 "'$laser_product_path'"
fi
# Change laser input sysfs file ownership
laser_input_root=/sys/devices/virtual/input
laser_input_list=$(ls $laser_input_root)
for laser_input_dir in $laser_input_list; do
if [ -f "$laser_input_root/$laser_input_dir/calibration_data" ]; then
laser_calib_file=$laser_input_root/$laser_input_dir/calibration_data
chown root:system $laser_calib_file
fi
if [ -f "$laser_input_root/$laser_input_dir/xtalk" ]; then
laser_xtalk_file=$laser_input_root/$laser_input_dir/xtalk
chown root:system $laser_xtalk_file
fi
if [ -f "$laser_input_root/$laser_input_dir/offset" ]; then
laser_offset_file=$laser_input_root/$laser_input_dir/offset
chown root:system $laser_offset_file
fi
done
if [ -z "$laser_calib_file" ]; then
laser_calib_file=$laser_product_path/calibration_data
fi
if [ -z "$laser_xtalk_file" ]; then
laser_xtalk_file=$laser_product_path/xtalk
fi
if [ -z "$laser_offset_file" ]; then
laser_offset_file=$laser_product_path/offset
fi
# Load calibration data
calib_data_file=/mnt/vendor/persist/camera/focus/cal_data
if [ -f $calib_data_file ]; then
chown root:vendor_tcmd $calib_data_file
chmod 660 $calib_data_file
if [ -z "$laser_calib_file" ]; then
error_and_leave 4 "'$laser_calib_file'"
else
cat $calib_data_file > $laser_calib_file
notice "laser calibration data updating complete"
fi
else
notice "laser calib_data_file '$calib_data_file' does not exist"
fi
bootmode=$(getprop ro.bootmode 2> /dev/null)
if [ $bootmode != "mot-factory" ]; then
# Enable smudge mode
echo 1 > $laser_product_path/smudge_correction_mode
notice "laser smudge mode enabled"
fi

9
rootdir/bin/init.mmi.touch.sh
View file

@ -30,6 +30,8 @@ firmware_path=/vendor/firmware
param_path=/data/vendor/param/touch
factory_property=ro.vendor.build.motfactory
bootmode_property=ro.bootmode
touch_firmware_property=ro.vendor.touch.fw_version
touch_vendor_property=ro.vendor.touch.supplier_vendor
let dec_cfg_id_boot=0
let dec_cfg_id_latest=0
# Whether to search for TP firmware in the parameter path
@ -56,7 +58,7 @@ debug()
notice()
{
echo "$*"
log -t "$scriptname" -p i "$*"
echo "$scriptname: $*" > /dev/kmsg
}
sanity_check()
@ -376,6 +378,8 @@ query_panel_info()
read_panel_property "controller_drv_ver"
panel_ver=${property#${property%?}}
debug "panel supplier: $supplier, ver $panel_ver"
setprop $touch_vendor_property "$supplier-$touch_vendor"
notice "touch_vendor_property = $touch_vendor_property, $supplier-$touch_vendor"
else
debug "driver does not report panel supplier"
fi
@ -588,6 +592,9 @@ process_touch_instance()
notice "property [$touch_status_prop] set to [`getprop $touch_status_prop`]"
notice "Handling touch ID [$touch_instance] permissions"
fi
read_touch_property buildid
setprop $touch_firmware_property ${property}
notice "Touch firmware property is $touch_firmware_property"
setup_permissions
}

2
rootdir/bin/init.oem.hw.sh
View file

@ -181,7 +181,7 @@ debug()
notice()
{
echo "$*"
log -t "$scriptname" -p i "$*"
echo "$scriptname: $*" > /dev/kmsg
}
add_device_params()

10
rootdir/bin/init.qcom.early_boot.sh
View file

@ -538,14 +538,6 @@ fi
# copy GPU frequencies to vendor property
if [ -f /sys/class/kgsl/kgsl-3d0/gpu_available_frequencies ]; then
# Remove turbo freq from prop
gpu_freq=`cat /sys/class/kgsl/kgsl-3d0/gpu_available_frequencies | sed 's/905000000 //g'` 2> /dev/null
gpu_freq=`cat /sys/class/kgsl/kgsl-3d0/gpu_available_frequencies` 2> /dev/null
setprop vendor.gpu.available_frequencies "$gpu_freq"
fi
# GPU turbo
gpu_max_freq=`cat /sys/class/kgsl/kgsl-3d0/devfreq/max_freq` 2> /dev/null
if [ ${gpu_max_freq} == '905000000' ]; then
setprop vendor.gpu.turbo_supported 1
setprop vendor.gpu.turbo_enabled 0
fi

59
rootdir/bin/init.qcom.post_boot.sh
View file

@ -803,12 +803,6 @@ KernelVersionA=${KernelVersionStr:0:1}
KernelVersionB=${KernelVersionS%.*}
function configure_zram_parameters() {
# Moto huangzq2: Skip this if we are using zram from fstab.
using_zram_from_fstab=`getprop ro.boot.using_zram_from_fstab`
if [ "$using_zram_from_fstab" == "true" ]; then
return
fi
MemTotalStr=`cat /proc/meminfo | grep MemTotal`
MemTotal=${MemTotalStr:16:8}
@ -931,16 +925,15 @@ function configure_memory_parameters() {
# Set allocstall_threshold to 0 for all targets.
#
BoardPlatform=`getprop ro.board.platform`
ProductName=`getprop ro.product.name`
low_ram=`getprop ro.config.low_ram`
if [ "$BoardPlatform" == "msmnile" ] || [ "$BoardPlatform" == "kona" ] || [ "$BoardPlatform" == "lito" ] || [ "$BoardPlatform" == "sdmshrike_au" ]; then
if [ "$ProductName" == "msmnile" ] || [ "$ProductName" == "kona" ] || [ "$ProductName" == "sdmshrike_au" ]; then
# Enable ZRAM
configure_zram_parameters
configure_read_ahead_kb_values
# Moto huangzq2: Remove duplicate configs as we already set it in init.mmi.rc
#echo 0 > /proc/sys/vm/page-cluster
#echo 100 > /proc/sys/vm/swappiness
echo 0 > /proc/sys/vm/page-cluster
echo 100 > /proc/sys/vm/swappiness
else
arch_type=`uname -m`
@ -986,7 +979,7 @@ else
else
# Set LMK series, vmpressure_file_min for 32 bit non-go targets.
# Disable Core Control, enable KLMK for non-go 8909.
if [ "$BoardPlatform" == "msm8909" ]; then
if [ "$ProductName" == "msm8909" ]; then
disable_core_ctl
echo 1 > /sys/module/lowmemorykiller/parameters/enable_lmk
fi
@ -2160,8 +2153,8 @@ case "$target" in
echo 1 > /sys/devices/system/cpu/cpu7/online
#Disable CPU retention modes for 32bit builds
BoardPlatform=`getprop ro.board.platform`
if [ "$BoardPlatform" == "msm8952_32" ] || [ "$BoardPlatform" == "msm8952_32_LMT" ]; then
ProductName=`getprop ro.product.name`
if [ "$ProductName" == "msm8952_32" ] || [ "$ProductName" == "msm8952_32_LMT" ]; then
echo N > /sys/module/lpm_levels/system/a72/cpu4/retention/idle_enabled
echo N > /sys/module/lpm_levels/system/a72/cpu5/retention/idle_enabled
echo N > /sys/module/lpm_levels/system/a72/cpu6/retention/idle_enabled
@ -3802,7 +3795,6 @@ case "$target" in
echo 40 > /sys/devices/system/cpu/cpu0/core_ctl/busy_down_thres
echo 8 > /sys/devices/system/cpu/cpu0/core_ctl/task_thres
echo 100 > /sys/devices/system/cpu/cpu0/core_ctl/offline_delay_ms
echo 0 > /sys/devices/system/cpu/cpu0/core_ctl/enable
# Disable Core control on gold, prime
echo 0 > /sys/devices/system/cpu/cpu6/core_ctl/enable
@ -3951,12 +3943,7 @@ case "$target" in
setprop vendor.dcvs.prop 1
# cpuset parameters
# Enable corectrl on needed targets
if [ "$corectl_enable" == "true" ]; then
echo 0-3 > /dev/cpuset/background/cpus
else
echo 0-5 > /dev/cpuset/background/cpus
fi
echo 0-5 > /dev/cpuset/background/cpus
echo 0-5 > /dev/cpuset/system-background/cpus
# Turn off scheduler boost at the end
@ -3972,13 +3959,7 @@ case "$target" in
"434" | "459" )
# Core control parameters on silver
corectl_enable=`getprop ro.vendor.config.corectl`
# Enable corectrl on needed targets
if [ "$corectl_enable" == "true" ]; then
echo 0 0 0 0 1 1 > /sys/devices/system/cpu/cpu0/core_ctl/not_preferred
else
echo 0 > /sys/devices/system/cpu/cpu0/core_ctl/enable
fi
echo 0 0 0 0 1 1 > /sys/devices/system/cpu/cpu0/core_ctl/not_preferred
echo 4 > /sys/devices/system/cpu/cpu0/core_ctl/min_cpus
echo 60 > /sys/devices/system/cpu/cpu0/core_ctl/busy_up_thres
echo 40 > /sys/devices/system/cpu/cpu0/core_ctl/busy_down_thres
@ -4108,12 +4089,6 @@ case "$target" in
# device/target specific folder
setprop vendor.dcvs.prop 1
# moto add by yangbq2, set wsf value as 1
# Disable wsf for all targets beacause we are using efk.
# wsf Range : 1..1000 So set to bare minimum value 1.
echo 1 > /proc/sys/vm/watermark_scale_factor
# moto end
# cpuset parameters
echo 0-5 > /dev/cpuset/background/cpus
echo 0-5 > /dev/cpuset/system-background/cpus
@ -4125,14 +4100,6 @@ case "$target" in
echo 0 > /sys/module/lpm_levels/parameters/sleep_disabled
;;
esac
# Log kernel wake-up source
echo 1 > /sys/module/msm_show_resume_irq/parameters/debug_mask
# Log kernel enabled clock before suspend
if [ -f /sys/kernel/debug/clk/debug_suspend ]; then
echo 1 > /sys/kernel/debug/clk/debug_suspend
fi
esac
case "$target" in
@ -5585,9 +5552,8 @@ case "$target" in
echo 400000000 > /proc/sys/kernel/sched_coloc_downmigrate_ns
# cpuset parameters
# Use parameters in init.target.rc
#echo 0-3 > /dev/cpuset/background/cpus
#echo 0-3 > /dev/cpuset/system-background/cpus
echo 0-3 > /dev/cpuset/background/cpus
echo 0-3 > /dev/cpuset/system-background/cpus
# Turn off scheduler boost at the end
echo 0 > /proc/sys/kernel/sched_boost
@ -5709,9 +5675,6 @@ case "$target" in
setprop vendor.dcvs.prop 1
echo N > /sys/module/lpm_levels/parameters/sleep_disabled
configure_memory_parameters
# Log kernel wake-up source
echo 1 > /sys/module/msm_show_resume_irq/parameters/debug_mask
;;
esac

78
rootdir/bin/init.qcom.sdio.sh
View file

@ -1,78 +0,0 @@
#! /vendor/bin/sh
# Copyright (c) 2010, The Linux Foundation. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials provided
# with the distribution.
# * Neither the name of The Linux Foundation nor the names of its
# contributors may be used to endorse or promote products derived
# from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# For successful WLAN card detection, WLAN needs SDIO polling turned on.
# This script can be used to turn on/off SDIO polling on appropriate
# SDIO slot on the MSM target (e.g. slot 3 on 7x30 surf).
arg=$1
target=`getprop ro.board.platform`
case "$target" in
"msm7627_6x")
echo 1 > /sys/devices/platform/msm_sdcc.1/polling
echo 1 > /sys/devices/platform/msm_sdcc.2/polling
;;
"msm7627_ffa")
echo 1 > /sys/devices/platform/msm_sdcc.2/polling
;;
"msm7627_surf")
echo 1 > /sys/devices/platform/msm_sdcc.1/polling
echo 1 > /sys/devices/platform/msm_sdcc.2/polling
;;
"msm7627a")
echo 1 > /sys/devices/platform/msm_sdcc.2/polling
;;
"msm7630_surf")
echo 1 > /sys/devices/platform/msm_sdcc.3/polling
;;
"msm7630_1x")
echo 1 > /sys/devices/platform/msm_sdcc.3/polling
;;
"msm7630_fusion")
echo 1 > /sys/devices/platform/msm_sdcc.3/polling
;;
"msm8660")
echo 1 > /sys/devices/platform/msm_sdcc.4/polling
;;
"msm8660_csfb")
echo 1 > /sys/devices/platform/msm_sdcc.4/polling
;;
esac
exit 0

17
rootdir/bin/init.mdm.sh → rootdir/bin/init.qcom.sensors.sh
View file

@ -1,6 +1,5 @@
#! /vendor/bin/sh
# Copyright (c) 2013, The Linux Foundation. All rights reserved.
#!/vendor/bin/sh
# Copyright (c) 2020 The Linux Foundation. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
@ -9,7 +8,7 @@
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# * Neither the name of Linux Foundation nor
# * Neither the name of The Linux Foundation nor
# the names of its contributors may be used to endorse or promote
# products derived from this software without specific prior written
# permission.
@ -27,8 +26,8 @@
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
baseband=`getprop ro.baseband`
if [ "$baseband" = "mdm" ] || [ "$baseband" = "mdm2" ]; then
start vendor.mdm_helper
fi
#
# Function to start sensors for SSC enabled platforms
#
cp /vendor/etc/sensors/scripts/* /data/vendor/sensors/scripts/
chmod a+rw /data/vendor/sensors/scripts/*

48
rootdir/bin/init.qti.chg_policy.sh Executable file
View file

@ -0,0 +1,48 @@
#! /vendor/bin/sh
#
# Copyright (c) 2019-2021 Qualcomm Technologies, Inc.
# All Rights Reserved.
# Confidential and Proprietary - Qualcomm Technologies, Inc.
#
# Copyright (c) 2019 The Linux Foundation. All rights reserved.
#
export PATH=/vendor/bin
soc_id=`getprop ro.vendor.qti.soc_id`
if [ "$soc_id" -eq 415 ] || [ "$soc_id" -eq 439 ] || [ "$soc_id" -eq 450 ] || [ "$soc_id" -eq 475 ] || [ "$soc_id" -eq 515 ]; then
setprop persist.vendor.hvdcp_opti.start 2
exit 0
fi
if [ "$soc_id" -eq 441 ] || [ "$soc_id" -eq 471 ]; then
#Scuba does not support usb-pd or charge pumps
find /sys/class/power_supply/battery/ -type f -maxdepth 1 | xargs chown system.system
find /sys/class/power_supply/bms/ -type f -maxdepth 1 | xargs chown system.system
find /sys/class/power_supply/main/ -type f -maxdepth 1 | xargs chown system.system
find /sys/class/power_supply/usb/ -type f -maxdepth 1 | xargs chown system.system
else
find /sys/class/power_supply/battery/ -type f -maxdepth 1 | xargs chown system.system
find /sys/class/power_supply/bms/ -type f -maxdepth 1 | xargs chown system.system
find /sys/class/power_supply/main/ -type f -maxdepth 1 | xargs chown system.system
find /sys/class/power_supply/usb/ -type f -maxdepth 1 | xargs chown system.system
find /sys/class/power_supply/charge_pump_master/ -type f -maxdepth 1 | xargs chown system.system
find /sys/class/power_supply/pc_port/ -type f -maxdepth 1 | xargs chown system.system
find /sys/class/power_supply/dc/ -type f -maxdepth 1 | xargs chown system.system
find /sys/class/power_supply/parallel/ -type f -maxdepth 1 | xargs chown system.system
find /sys/class/usbpd/usbpd0/ -type f -maxdepth 1 | xargs chown system.system
find /sys/class/qc-vdm/ -type f -maxdepth 1 | xargs chown system.system
find /sys/class/charge_pump/ -type f -maxdepth 1 | xargs chown system.system
find /sys/class/qcom-battery/ -type f -maxdepth 1 | xargs chown system.system
for i in 0 1 2 3 4 5 6 7 8 9
do
devname=`cat /sys/bus/iio/devices/iio:device$i/name`
if [[ "$devname" == *smb* ]] || [[ "$devname" == *qg* ]] || [[ "$devname" == *div2_cp* ]]; then
find /sys/bus/iio/devices/iio:device$i/ -type f -maxdepth 1 | xargs chown system.system
fi
done
fi
setprop persist.vendor.hvdcp_opti.start 1

77
rootdir/bin/init.qti.dcvs.sh
View file

@ -1,77 +0,0 @@
#! /vendor/bin/sh
#
# Copyright (c) 2020, The Linux Foundation. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials provided
# with the distribution.
# * Neither the name of The Linux Foundation nor the names of its
# contributors may be used to endorse or promote products derived
# from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
for device in /sys/devices/platform/soc
do
for memlat in $device/*qcom,devfreq-l3/*cpu*-lat/devfreq/*cpu*-lat
do
echo "mem_latency" > $memlat/governor
echo 8 > $memlat/polling_interval
echo 400 > $memlat/mem_latency/ratio_ceil
done
#Enable mem_latency governor for LLCC and DDR scaling
for memlat in $device/*cpu*-lat/devfreq/*cpu*-lat
do
echo "mem_latency" > $memlat/governor
echo 8 > $memlat/polling_interval
echo 400 > $memlat/mem_latency/ratio_ceil
done
#Enable compute governor for gold latfloor
for latfloor in $device/*cpu-ddr-latfloor*/devfreq/*cpu-ddr-latfloor*
do
echo "compute" > $latfloor/governor
echo 8 > $latfloor/polling_interval
done
for qoslat in $device/*qoslat/devfreq/*qoslat
do
echo "mem_latency" > $qoslat/governor
echo 10 > $qoslat/polling_interval
echo 50 > $qoslat/mem_latency/ratio_ceil
done
for l3cdsp in $device/*qcom,devfreq-l3/*cdsp-l3-lat/devfreq/*cdsp-l3-lat
do
echo "cdspl3" > $l3cdsp/governor
done
#Gold L3 ratio ceil
for l3gold in $device/*qcom,devfreq-l3/*cpu4-cpu-l3-lat/devfreq/*cpu4-cpu-l3-lat
do
echo 4000 > $l3gold/mem_latency/ratio_ceil
done
#Prime L3 ratio ceil
for l3prime in $device/*qcom,devfreq-l3/*cpu7-cpu-l3-lat/devfreq/*cpu7-cpu-l3-lat
do
echo 20000 > $l3prime/mem_latency/ratio_ceil
done
done;

56
rootdir/bin/init.qti.kernel.sh Executable file
View file

@ -0,0 +1,56 @@
#! /vendor/bin/sh
#=============================================================================
# Copyright (c) 2019-2020 Qualcomm Technologies, Inc.
# All Rights Reserved.
# Confidential and Proprietary - Qualcomm Technologies, Inc.
#
# Copyright (c) 2009-2012, 2014-2019, The Linux Foundation. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# * Neither the name of The Linux Foundation nor
# the names of its contributors may be used to endorse or promote
# products derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#=============================================================================
verify_pasr_support()
{
ddr_type=`od -An -tx /proc/device-tree/memory/ddr_device_type`
ddr_type5="08"
if [ -d /sys/kernel/mem-offline ]; then
#only LPDDR5 supports PAAR
if [ ${ddr_type:4:2} != $ddr_type5 ]; then
setprop vendor.pasr.activemode.enabled false
fi
setprop vendor.pasr.enabled true
fi
}
start_msm_irqbalance()
{
if [ -f /vendor/bin/msm_irqbalance ]; then
start vendor.msm_irqbalance
fi
}
start_msm_irqbalance
verify_pasr_support

81
rootdir/bin/init.qti.media.sh
View file

@ -2,7 +2,11 @@
#==============================================================================
# init.qti.media.sh
#
# Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
# Copyright (c) 2020-2021, Qualcomm Technologies, Inc.
# All Rights Reserved.
# Confidential and Proprietary - Qualcomm Technologies, Inc.
#
# Copyright (c) 2020, The Linux Foundation. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
@ -36,26 +40,61 @@ else
soc_hwid=`cat /sys/devices/system/soc/soc0/id` 2> /dev/null
fi
target_qssi=`getprop vendor.media.target.qssi`
target=`getprop ro.board.platform`
build_codename=`getprop vendor.media.system.build_codename`
case "$target" in
"bengal")
case "$soc_hwid" in
441|471|473|474)
setprop vendor.media.target.version 2
sku_ver=`cat /sys/devices/platform/soc/5a00000.qcom,vidc1/sku_version` 2> /dev/null
if [ $sku_ver -eq 1 ]; then
setprop vendor.media.target.version 3
fi
;;
518)
setprop vendor.media.target.version 3
;;
*)
sku_ver=`cat /sys/devices/platform/soc/5a00000.qcom,vidc/sku_version` 2> /dev/null
if [ $sku_ver -eq 1 ]; then
setprop vendor.media.target.version 1
fi
;;
esac
;;
"lahaina")
case "$soc_hwid" in
475|515)
setprop vendor.media.target_variant "_yupik_v0"
setprop vendor.netflix.bsp_rev "Q7325-SPY-33758-1"
sku_ver=`cat /sys/devices/platform/soc/aa00000.qcom,vidc/sku_version` 2> /dev/null
if [ $sku_ver -eq 1 ]; then
setprop vendor.media.target_variant "_yupik_v1"
fi
;;
450)
setprop vendor.media.target_variant "_shima_v3"
if [ $build_codename -eq "11" ]; then
setprop vendor.netflix.bsp_rev "Q875-32774-1"
fi
sku_ver=`cat /sys/devices/platform/soc/aa00000.qcom,vidc/sku_version` 2> /dev/null
if [ $sku_ver -eq 1 ]; then
setprop vendor.media.target_variant "_shima_v1"
elif [ $sku_ver -eq 2 ]; then
setprop vendor.media.target_variant "_shima_v2"
fi
;;
*)
if [ $target_qssi == "true" ]; then
setprop vendor.media.target_variant "_lahaina_vendor"
else
setprop vendor.media.target_variant "_lahaina"
fi
if [ $build_codename -eq "11" ]; then
setprop vendor.netflix.bsp_rev "Q875-32408-1"
fi
;;
esac
;;
"holi")
case "$soc_hwid" in
507)
setprop vendor.media.target_variant "_blair"
;;
454|472)
setprop vendor.media.target_variant "_holi"
if [ $build_codename -eq "11" ]; then
setprop vendor.netflix.bsp_rev "Q4350-32962-1"
fi
;;
esac
;;
"msmnile")
setprop vendor.media.target_variant "_msmnile"
;;
"sm6150")
setprop vendor.media.target_variant "_sm6150"
;;
esac

38
rootdir/bin/vendor_modprobe.sh Executable file
View file

@ -0,0 +1,38 @@
#! /vendor/bin/sh
#=============================================================================
# Copyright (c) 2019-2020 Qualcomm Technologies, Inc.
# All Rights Reserved.
# Confidential and Proprietary - Qualcomm Technologies, Inc.
#=============================================================================
#default to /vendor/lib/modules
MODULES_PATH="/vendor/lib/modules/"
GKI_MOD_PATH="/vendor/lib/modules/5.4-gki"
MODPROBE="/vendor/bin/modprobe"
MODULES=`${MODPROBE} -d ${MODULES_PATH} -l`
# Find the first non-blacklisted module and try
# inserting it. If insertion fails the module is not
# compatible with the current kernel. Change the modules
# directory to gki.
for MODULE in ${MODULES}; do
cat ${MODULES_PATH}/modules.blocklist | grep $MODULE
if [ $? -ne 0 ]; then
break
fi
done
${MODPROBE} -a -b -d ${MODULES_PATH} ${MODULE}
if [ $? -ne 0 ];then
MODULES_PATH=$GKI_MOD_PATH
MODULES=`${MODPROBE} -d ${MODULES_PATH} -l`
fi
# Iterate over module list and modprobe them in background.
for MODULE in ${MODULES}; do
${MODPROBE} -a -b -d ${MODULES_PATH} ${MODULE} &
done
# Wait until all the modprobes are finished
wait

10
rootdir/etc/init/hw/init.mmi.charge_only.rc
View file

@ -1,10 +1,4 @@
on charger
stop vendor.sensors
chown radio wakelock /sys/power/wake_lock
chmod 0660 /sys/power/wake_lock
chown radio wakelock /sys/power/wake_unlock
chmod 0660 /sys/power/wake_unlock
start vendor.thermal-com
start system_suspend
@ -19,10 +13,6 @@ on charger
write /sys/devices/system/cpu/cpu6/online 0
write /sys/devices/system/cpu/cpu7/online 0
# Allow system to sleep when in COM
write /sys/module/lpm_levels/parameters/sleep_disabled 0
write /proc/sys/kernel/sched_boost 0
service vendor.thermal-com /vendor/bin/thermal-engine --minimode
class charger
user root

20
rootdir/etc/init/hw/init.mmi.chipset.rc
View file

@ -3,11 +3,25 @@ import /vendor/etc/init/hw/init.mmi.charge_only.rc
on post-fs
# MOT_LED_CALIBRATION
chown camera /mnt/vendor/persist/camera/mot_ledcal
chown camera camera /mnt/vendor/persist/camera/mot_ledcal
on early-init
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules exfat
#Enable qpnp_smbcharger_mmi debug
write /sys/module/qpnp_smbcharger_mmi/parameters/debug_enabled Y
on property:ro.boot.default_usb_mode=device && property:vendor.usb.controller=*
setprop sys.usb.controller ${vendor.usb.controller}
write /sys/class/udc/${vendor.usb.controller}/device/../mode peripheral
#sync power supply with healthd
wait /sys/class/power_supply/battery
wait /sys/class/power_supply/usb
on early-boot && property:ro.boot.bm_ulog_enabled=1
write /sys/module/bm_adsp_ulog/parameters/debug_enabled 1
on charger && property:ro.boot.bm_ulog_enabled=1
write /sys/module/bm_adsp_ulog/parameters/debug_enabled 1
on property:sys.boot_completed=1
write /sys/devices/platform/soc/soc:mmi,charger/state_sync 1

21
rootdir/etc/init/hw/init.qcom.rc
View file

@ -1,4 +1,4 @@
# Copyright (c) 2009-2012, 2014-2021, The Linux Foundation. All rights reserved.
# Copyright (c) 2009-2012, 2014-2020, The Linux Foundation. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
@ -240,7 +240,7 @@ on post-fs-data
mkdir /data/vendor/pwr 0700 root root
# Create directory used by media clients
mkdir /data/vendor/media 0775 mediacodec media
mkdir /data/vendor/media 0770 mediacodec media
# Create /data/vendor/tzstorage directory for SFS listener
mkdir /data/vendor/tzstorage 0770 system system
@ -689,23 +689,6 @@ on property:vendor.opengles.version=*
on property:vendor.gpu.available_frequencies=*
setprop ro.vendor.gpu.available_frequencies ${vendor.gpu.available_frequencies}
# huangzq2: GPU trubo
on property:vendor.gpu.turbo_enabled=1
setprop vendor.thermal.mode perf
stop thermal-engine
start thermal-engine
on property:vendor.gpu.turbo_enabled=0
setprop vendor.thermal.mode normal
stop thermal-engine
start thermal-engine
on property:vendor.gpu.turbo_supported=1 && property:vendor.gpu.turbo_enabled=1
write /sys/class/kgsl/kgsl-3d0/max_pwrlevel 0
on property:vendor.gpu.turbo_supported=1 && property:vendor.gpu.turbo_enabled=0
write /sys/class/kgsl/kgsl-3d0/max_pwrlevel 1
service vendor.audio-hal /vendor/bin/hw/android.hardware.audio.service
override
class hal

174
rootdir/etc/init/hw/init.qti.kernel.rc Normal file
View file

@ -0,0 +1,174 @@
#=============================================================================
# Copyright (c) 2019-2021 Qualcomm Technologies, Inc.
# All Rights Reserved.
# Confidential and Proprietary - Qualcomm Technologies, Inc.
#
# Copyright (c) 2009-2012, 2014-2019, The Linux Foundation. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# * Neither the name of The Linux Foundation nor
# the names of its contributors may be used to endorse or promote
# products derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#=============================================================================
on early-init
mount debugfs debugfs /sys/kernel/debug
chmod 0755 /sys/kernel/debug
# Mount tracefs in /sys/kernel/tracing as CONFIG_DEBUG_FS might be
# disabled and /sys/kernel/debug/tracing might not be available
mount tracefs tracefs /sys/kernel/tracing
chmod 0755 /sys/kernel/tracing
chown root system /dev/kmsg
chmod 0620 /dev/kmsg
write /proc/sys/kernel/sched_boost 1
write /proc/sys/kernel/firmware_config/force_sysfs_fallback 1
on init
# Create cgroup mount point for memory
mkdir /sys/fs/cgroup/memory/bg 0750 root system
write /sys/fs/cgroup/memory/bg/memory.swappiness 140
write /sys/fs/cgroup/memory/bg/memory.move_charge_at_immigrate 1
chown root system /sys/fs/cgroup/memory/bg/tasks
chmod 0660 /sys/fs/cgroup/memory/bg/tasks
# update scheduler tunables
write /dev/cpuctl/foreground/cpu.uclamp.sched_boost_no_override 1
write /dev/cpuctl/top-app/cpu.uclamp.sched_boost_no_override 1
write /dev/cpuctl/background/cpu.uclamp.colocate 0
write /dev/cpuctl/foreground/cpu.uclamp.colocate 0
write /dev/cpuctl/top-app/cpu.uclamp.colocate 1
on post-fs
chmod 0755 /sys/kernel/debug/tracing
# set aggressive read ahead for dm-0 and dm-1 during boot up
write /sys/block/dm-0/queue/read_ahead_kb 2048
write /sys/block/dm-1/queue/read_ahead_kb 2048
write /sys/block/dm-2/queue/read_ahead_kb 2048
on early-boot
# Allow subsystem (modem etc) debugging
write /sys/kernel/boot_adsp/boot 1
write /sys/kernel/boot_cdsp/boot 1
write /sys/kernel/boot_slpi/boot 1
write /sys/devices/virtual/cvp/cvp/boot 1
on boot
# Set the console loglevel to < KERN_WARN
# Set the default message loglevel to KERN_INFO
write /proc/sys/kernel/printk "4 6 1 7"
# Allow access to emmc rawdump block partition and dload sysfs node
chown root system /dev/block/bootdevice/by-name/rawdump
chmod 0660 /dev/block/bootdevice/by-name/rawdump
chown root system /sys/kernel/dload/emmc_dload
chmod 0660 /sys/kernel/dload/emmc_dload
chown root system /dev/block/bootdevice/by-name/ramdump
chmod 0660 /dev/block/bootdevice/by-name/ramdump
chown root system /sys/kernel/dload/dload_mode
chmod 0660 /sys/kernel/dload/dload_mode
# set the io-scheduler to bfq on all mq support devices
write /sys/block/sda/queue/scheduler bfq
write /sys/block/sdb/queue/scheduler bfq
write /sys/block/sdc/queue/scheduler bfq
write /sys/block/sdd/queue/scheduler bfq
write /sys/block/sde/queue/scheduler bfq
write /sys/block/sdf/queue/scheduler bfq
write /sys/block/sdg/queue/scheduler bfq
write /sys/block/sdh/queue/scheduler bfq
write /sys/class/block/mmcblk0/queue/scheduler bfq
write /sys/class/block/mmcblk1/queue/scheduler bfq
# update io-scheduler tunables
write /sys/block/sda/queue/iosched/slice_idle 0
write /sys/block/sdb/queue/iosched/slice_idle 0
write /sys/block/sdc/queue/iosched/slice_idle 0
write /sys/block/sdd/queue/iosched/slice_idle 0
write /sys/block/sde/queue/iosched/slice_idle 0
write /sys/block/sdf/queue/iosched/slice_idle 0
write /sys/block/sdg/queue/iosched/slice_idle 0
write /sys/block/sdh/queue/iosched/slice_idle 0
write /sys/class/block/mmcblk0/queue/iosched/slice_idle 0
write /sys/class/block/mmcblk1/queue/iosched/slice_idle 0
on post-fs-data
# Create directory used for dump collection
mkdir /data/vendor/ssrdump 0770 root system
on property:persist.sys.ssr.enable_debug=*
write /sys/module/subsys_pil_tz/parameters/enable_debug ${persist.sys.ssr.enable_debug}
on property:persist.sys.mba_boot_timeout=*
write /sys/module/pil_msa/parameters/pbl_mba_boot_timeout_ms ${persist.sys.mba_boot_timeout}
on property:persist.sys.modem_auth_timeout=*
write /sys/module/pil_msa/parameters/modem_auth_timeout_ms ${persist.sys.modem_auth_timeout}
on property:persist.sys.pil_proxy_timeout=*
write /sys/module/peripheral_loader/parameters/proxy_timeout_ms ${persist.sys.pil_proxy_timeout}
on property:persist.vendor.ssr.enable_ramdumps=1
write /sys/module/subsystem_restart/parameters/enable_ramdumps 1
on property:persist.vendor.ssr.enable_ramdumps=0
write /sys/module/subsystem_restart/parameters/enable_ramdumps 0
on property:persist.vendor.sys.rawdump_copy=1
write /sys/kernel/dload/emmc_dload 1
on property:persist.vendor.sys.rawdump_copy=0
write /sys/kernel/dload/emmc_dload 0
service kernel-boot /vendor/bin/sh /vendor/bin/init.qti.kernel.sh
class core
user root
group root
disabled
oneshot
service kernel-post-boot /vendor/bin/sh /vendor/bin/init.kernel.post_boot.sh
class core
user root
group root system wakelock graphics
disabled
oneshot
on property:sys.boot_completed=1
write /dev/kmsg "Boot completed "
#Reset read ahead for dm-0, dm-1 and dm-2 to 512kb
write /sys/block/dm-0/queue/read_ahead_kb 512
write /sys/block/dm-1/queue/read_ahead_kb 512
write /sys/block/dm-2/queue/read_ahead_kb 512
write /proc/sys/vm/page-cluster 0
start kernel-boot
start kernel-post-boot
service vendor.msm_irqbalance /vendor/bin/msm_irqbalance -f /system/vendor/etc/msm_irqbalance.conf
class core
user root
group root
disabled

130
rootdir/etc/init/hw/init.target.rc
View file

@ -1,5 +1,5 @@
# Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
# Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
@ -29,20 +29,42 @@
#
import /vendor/etc/init/hw/init.mmi.rc
import /vendor/etc/init/hw/init.qti.kernel.rc
on early-init
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules audio_q6_pdr audio_q6_notifier audio_snd_event audio_apr audio_adsp_loader audio_q6 audio_native audio_usf audio_pinctrl_wcd audio_pinctrl_lpi audio_swr audio_platform audio_hdmi audio_stub audio_wcd_core audio_wsa881x audio_bolero_cdc audio_wsa_macro audio_va_macro audio_rx_macro audio_tx_macro audio_wcd938x audio_wcd938x_slave audio_machine_kona
exec u:r:vendor_modprobe:s0 -- /vendor/bin/vendor_modprobe.sh
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules q6_pdr_dlkm q6_notifier_dlkm snd_event_dlkm apr_dlkm adsp_loader_dlkm q6_dlkm native_dlkm pinctrl_wcd_dlkm pinctrl_lpi_dlkm swr_dlkm platform_dlkm hdmi_dlkm stub_dlkm wcd_core_dlkm wsa883x_dlkm bolero_cdc_dlkm wsa_macro_dlkm va_macro_dlkm rx_macro_dlkm tx_macro_dlkm bt_fm_slim wcd938x_dlkm wcd938x_slave_dlkm wcd937x_dlkm wcd937x_slave_dlkm swr_dmic_dlkm swr_haptics_dlkm machine_dlkm radio-i2c-rtc6226-qca cdsprm
write /proc/sys/kernel/sched_boost 1
wait /sys/devices/soc0/soc_id
on init
write /dev/stune/foreground/schedtune.sched_boost_no_override 1
write /dev/stune/top-app/schedtune.sched_boost_no_override 1
write /dev/stune/schedtune.colocate 0
write /dev/stune/background/schedtune.colocate 0
write /dev/stune/system-background/schedtune.colocate 0
write /dev/stune/foreground/schedtune.colocate 0
write /dev/stune/top-app/schedtune.colocate 1
wait /dev/block/platform/soc/1d84000.ufshc
symlink /dev/block/platform/soc/1d84000.ufshc /dev/block/bootdevice
# Scheduler uclamp
mkdir /dev/cpuctl/foreground
mkdir /dev/cpuctl/background
mkdir /dev/cpuctl/top-app
mkdir /dev/cpuctl/rt
chown system system /dev/cpuctl
chown system system /dev/cpuctl/foreground
chown system system /dev/cpuctl/background
chown system system /dev/cpuctl/top-app
chown system system /dev/cpuctl/rt
chown system system /dev/cpuctl/tasks
chown system system /dev/cpuctl/foreground/tasks
chown system system /dev/cpuctl/background/tasks
chown system system /dev/cpuctl/top-app/tasks
chown system system /dev/cpuctl/rt/tasks
chmod 0664 /dev/cpuctl/tasks
chmod 0664 /dev/cpuctl/foreground/tasks
chmod 0664 /dev/cpuctl/background/tasks
chmod 0664 /dev/cpuctl/top-app/tasks
chmod 0664 /dev/cpuctl/rt/tasks
write /dev/cpuctl/foreground/cpu.rt_runtime_us 950000
write /dev/cpuctl/background/cpu.rt_runtime_us 950000
write /dev/cpuctl/top-app/cpu.rt_runtime_us 950000
write /dev/cpuctl/rt/cpu.rt_runtime_us 950000
wait /dev/block/platform/soc/${ro.boot.bootdevice}
symlink /dev/block/platform/soc/${ro.boot.bootdevice} /dev/block/bootdevice
chown system system /sys/devices/platform/soc/1d84000.ufshc/auto_hibern8
chmod 0660 /sys/devices/platform/soc/1d84000.ufshc/auto_hibern8
start logd
@ -53,70 +75,89 @@ on early-fs
on fs
start hwservicemanager
mkdir /mnt/vendor/spunvm 0660 system system
mount_all /vendor/etc/fstab.qcom --early
mount_all --early
chown root system /mnt/vendor/persist
chmod 0771 /mnt/vendor/persist
restorecon_recursive /mnt/vendor/persist
mkdir /mnt/vendor/persist/data 0700 system system
on fs && property:ro.boot.product.vendor.sku=lahaina
mkdir /mnt/vendor/spunvm 0660 system system
wait /dev/block/bootdevice/by-name/spunvm
mount vfat /dev/block/bootdevice/by-name/spunvm /mnt/vendor/spunvm rw noatime shortname=lower,uid=1000,gid=1000,dmask=007,fmask=007,context=u:object_r:vendor_spunvm_file:s0
on post-fs
# set RLIMIT_MEMLOCK to 64MB
setrlimit 8 67108864 67108864
write /dev/ipa 1
on late-fs
wait_for_prop hwservicemanager.ready true
exec_start wait_for_keymaster
mount_all /vendor/etc/fstab.qcom --late
#exec_start wait_for_keymaster
mount_all --late
on post-fs-data
mkdir /vendor/data/tombstones 0771 system system
# Enable WLAN cold boot calibration
write /sys/devices/platform/soc/b0000000.qcom,cnss-qca6390/fs_ready 1
write /sys/devices/platform/soc/b0000000.qcom,cnss-qca6490/fs_ready 1
# Motorola: disable vendor.sensors by default and move the start to init.qcom.rc
# Disabling by default will ensure that we do not start vendor.sensors in
# Charge-Only-Mode
#on early-boot
# start vendor.sensors
on early-boot
start vendor.sensors
on boot
# CPUset policy is "spread" for foreground/top, "pack" for background/system
# Cores 0-3 are silver, 4-6 are gold, 7 is gold+
# Keep 1 reserved for top (gold+)
# Keep 1 for system/background (silver)
write /dev/cpuset/top-app/cpus 0-7
write /dev/cpuset/foreground/cpus 1-6
write /dev/cpuset/background/cpus 0-3
write /dev/cpuset/system-background/cpus 0-3
write /dev/cpuset/audio-app/cpus 1-2
# Add a cpuset for the camera daemon
# We want all cores for camera
mkdir /dev/cpuset/camera-daemon
write /dev/cpuset/camera-daemon/cpus 0-3
write /dev/cpuset/camera-daemon/cpus 0-7
write /dev/cpuset/camera-daemon/mems 0
chown cameraserver cameraserver /dev/cpuset/camera-daemon
chown cameraserver cameraserver /dev/cpuset/camera-daemon/tasks
chmod 0660 /dev/cpuset/camera-daemon/tasks
chown system /sys/devices/platform/soc/990000.i2c/i2c-0/0-0049/trusted_touch_enable
chmod 0660 /sys/devices/platform/soc/990000.i2c/i2c-0/0-0049/trusted_touch_enable
chown system /sys/devices/platform/soc/990000.i2c/i2c-0/0-0038/trusted_touch_enable
chmod 0660 /sys/devices/platform/soc/990000.i2c/i2c-0/0-0038/trusted_touch_enable
chown system /sys/devices/platform/soc/988000.i2c/i2c-1/1-0038/trusted_touch_enable
chmod 0660 /sys/devices/platform/soc/988000.i2c/i2c-1/1-0038/trusted_touch_enable
chown system /sys/devices/platform/soc/990000.i2c/i2c-0/0-0049/trusted_touch_event
chmod 0660 /sys/devices/platform/soc/990000.i2c/i2c-0/0-0049/trusted_touch_event
chown system /sys/devices/platform/soc/990000.i2c/i2c-0/0-0038/trusted_touch_event
chmod 0660 /sys/devices/platform/soc/990000.i2c/i2c-0/0-0038/trusted_touch_event
chown system /sys/devices/platform/soc/988000.i2c/i2c-1/1-0038/trusted_touch_event
chmod 0660 /sys/devices/platform/soc/988000.i2c/i2c-1/1-0038/trusted_touch_event
chown system /sys/devices/platform/soc/a94000.i2c/i2c-2/2-0062/trusted_touch_enable
chmod 0660 /sys/devices/platform/soc/a94000.i2c/i2c-2/2-0062/trusted_touch_enable
chown system /sys/devices/platform/soc/a94000.i2c/i2c-2/2-0062/trusted_touch_event
chmod 0660 /sys/devices/platform/soc/a94000.i2c/i2c-2/2-0062/trusted_touch_event
chown system /sys/devices/system/cpu/hyp_core_ctl/enable
chown system /sys/devices/system/cpu/hyp_core_ctl/hcc_min_freq
#USB controller configuration
setprop vendor.usb.rndis.func.name "gsi"
setprop vendor.usb.rmnet.func.name "gsi"
setprop vendor.usb.rmnet.inst.name "rmnet"
setprop vendor.usb.dpl.inst.name "dpl"
setprop vendor.usb.qdss.inst.name "qdss"
setprop vendor.usb.qdss.inst.name "qdss_mdm"
setprop vendor.usb.controller a600000.dwc3
# Load all wlan drivers
exec_background u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules/ qca_cld3_qca6390 qca_cld3_qca6490
#Load WLAN driver
exec_background u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules/ qca_cld3_wlan qca_cld3_qca6390
exec_background u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules/5.4-gki qca_cld3_wlan qca_cld3_qca6390
#Allow access to memory hotplug device attributes
chown system system /sys/kernel/mem-offline/anon_migrate
on boot && property:persist.vendor.usb.controller.default=*
setprop vendor.usb.controller ${persist.vendor.usb.controller.default}
on init && property:ro.boot.mode=charger
mount_all /vendor/etc/charger_fw_fstab.qti --early
write /sys/kernel/boot_adsp/boot 1
wait /sys/class/power_supply/battery
on charger
start vendor.power_off_alarm
setprop sys.usb.controller a600000.dwc3
setprop sys.usb.configfs 1
service vendor.lowi /vendor/bin/sscrpcd
service vendor.lowi /vendor/bin/lowirpcd
class core
user system
group system wakelock
@ -126,7 +167,7 @@ service vendor.lowi /vendor/bin/sscrpcd
service vendor.pd_mapper /vendor/bin/pd-mapper
class core
user system
group system
group system log diag
#Peripheral manager
service vendor.per_mgr /vendor/bin/pm-service
@ -141,10 +182,10 @@ service vendor.per_proxy /vendor/bin/pm-proxy
group system
disabled
service vendor.mdm_helper /vendor/bin/mdm_helper
class core
group log system wakelock diag vendor_rfs
disabled
#service vendor.mdm_helper /vendor/bin/mdm_helper
# class core
# group log system wakelock diag vendor_rfs
# disabled
service vendor.mdm_launcher /vendor/bin/sh /vendor/bin/init.mdm.sh
class core
@ -156,12 +197,15 @@ on property:init.svc.vendor.per_mgr=running
on property:sys.shutdown.requested=*
stop vendor.per_proxy
service dcvs-sh /vendor/bin/init.qti.dcvs.sh
#fan-controller
service fan_control_turn_on /vendor/bin/fan_control 1
class late_start
user root
group root system
disabled
oneshot
on property:vendor.dcvs.prop=1
start dcvs-sh
service fan_control_turn_off /vendor/bin/fan_control 0
class late_start
user root
disabled
oneshot