sm8250-common -> sm7325-common
This commit is contained in:
SGCMarkus
parent
5404d41486
commit
95b667c5b9
74 changed files with 4210 additions and 3942 deletions
|
|
@ -3,3 +3,4 @@ p2p_no_group_iface=1
|
|||
persistent_reconnect=1
|
||||
bss_max_count=400
|
||||
p2p_go_he=1
|
||||
p2p_6ghz_disable=1
|
||||
|
|
|
|||
|
|
@ -1,359 +1,100 @@
|
|||
# This file allows user to override the factory
|
||||
# defaults for the WLAN Driver
|
||||
|
||||
# Phy Mode (auto, b, g, n, etc)
|
||||
# Valid values are 0-12, with 0(Min) = Auto, 12(Max) = 11ax
|
||||
# 1 = 11abg, 2 = 11b, 3 = 11g, 4 = 11n, 5 = 11g only, 6 = 11n only
|
||||
# 7 = 11b only 8 = 11ac only, 9 = 11ac, 12 = 11ax.
|
||||
fw_timeout_crash=1
|
||||
gDot11Mode=0
|
||||
|
||||
# UAPSD service interval for VO,VI, BE, BK traffic
|
||||
InfraUapsdVoSrvIntv=0
|
||||
InfraUapsdViSrvIntv=0
|
||||
InfraUapsdBeSrvIntv=0
|
||||
InfraUapsdBkSrvIntv=0
|
||||
|
||||
# Flag to allow STA send AddTspec even when ACM is Off
|
||||
gAddTSWhenACMIsOff=1
|
||||
|
||||
#Enable OBSS protection
|
||||
gEnableApOBSSProt=1
|
||||
|
||||
# Maximum Tx power
|
||||
# gTxPowerCap=30
|
||||
|
||||
# Fragmentation Threshold
|
||||
# gFragmentationThreshold=2346
|
||||
|
||||
# RTS threshold
|
||||
RTSThreshold=1048576
|
||||
|
||||
# WMM Enable/Disable
|
||||
WmmIsEnabled=0
|
||||
|
||||
# 802.11d support
|
||||
gDisableIntraBssFwd=0
|
||||
g11dSupportEnabled=0
|
||||
|
||||
# DFS Master Capability
|
||||
gEnableDFSMasterCap=0
|
||||
|
||||
ImplicitQosIsEnabled=0
|
||||
|
||||
gEnableDFSMasterCap=1
|
||||
gNeighborScanTimerPeriod=200
|
||||
gNeighborLookupThreshold=76
|
||||
|
||||
# Legacy (non-ESE, non-802.11r) Fast Roaming Support
|
||||
# To enable, set FastRoamEnabled=1
|
||||
# To disable, set FastRoamEnabled=0
|
||||
gNeighborScanChannelMinTime=20
|
||||
FastRoamEnabled=1
|
||||
|
||||
#Channel Bonding
|
||||
RoamRssiDiff=5
|
||||
gRoamIntraBand=0
|
||||
gChannelBondingMode5GHz=1
|
||||
|
||||
#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds).
|
||||
#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link
|
||||
#is idle for last 10 seconds.) For both active and power save clients.
|
||||
|
||||
#Power save clients: DUT set TIM bit from 10th second onwards and till client
|
||||
#honors TIM bit. If doesn't honor for 5 seconds then DUT remove client.
|
||||
|
||||
#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not
|
||||
#success still we try on 11th second if not tries on 12th and so on till 15th
|
||||
#second. Hence before disconnection DUT will send 5 NULL frames. Hence in any
|
||||
#case DUT will detect client got removed in (10+5) seconds.
|
||||
#i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod)..
|
||||
|
||||
#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and
|
||||
#it is period where we send NULL frame.
|
||||
#gApLinkMonitorPeriod = 10
|
||||
#gGoLinkMonitorPeriod = 10
|
||||
|
||||
#gApKeepAlivePeriod is time to spend to check whether frame
|
||||
#are succeed to send or not. Hence total effective detection time is
|
||||
#(gApLinkMonitorPeriod + gApKeepAlivePeriod)
|
||||
|
||||
# Enable DFS channel roam
|
||||
# 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE
|
||||
gEnableDFSChnlScan=1
|
||||
gAllowDFSChannelRoam=1
|
||||
|
||||
gVhtChannelWidth=2
|
||||
|
||||
# Set txchainmask and rxchainmask
|
||||
# These parameters are used only if gEnable2x2 is 0
|
||||
# Valid values are 1,2
|
||||
# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0.
|
||||
# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1.
|
||||
gSetTxChainmask1x1=1
|
||||
gSetRxChainmask1x1=1
|
||||
|
||||
# MCC to SCC Switch mode:
|
||||
# 0-Disable
|
||||
# 1-Enable
|
||||
# 2-Force SCC if same band, with SAP restart
|
||||
# 3-Force SCC if same band, without SAP restart by sending (E)CSA
|
||||
# 4-Force SCC if same band (or) use SAP mandatory channel for DBS,
|
||||
# without SAP restart by sending (E)CSA
|
||||
gWlanMccToSccSwitchMode = 3
|
||||
|
||||
# 1=enable tx STBC; 0=disable
|
||||
gEnableTXSTBC=1
|
||||
|
||||
#Enable/Disable Tx beamformee in SAP mode
|
||||
gEnableTxBFeeSAP=1
|
||||
|
||||
# Enable Tx beamforming in VHT20MHz
|
||||
# Valid values are 0,1. If commented out, the default value is 0.
|
||||
# 0=disable, 1=enable
|
||||
gEnableTxBFin20MHz=1
|
||||
|
||||
#Enable/Disable SU Tx beamformer support
|
||||
gEnableTxSUBeamformer=1
|
||||
|
||||
# 802.11K support
|
||||
gRrmEnable=1
|
||||
|
||||
# Maximum Receive AMPDU size (VHT only. Valid values:
|
||||
# 0->8k 1->16k 2->32k 3->64k 4->128k)
|
||||
gEnablefwprint=0
|
||||
gVhtAmpduLenExponent=7
|
||||
|
||||
# Maximum MPDU length (VHT only. Valid values:
|
||||
# 0->3895 octets, 1->7991 octets, 2->11454 octets)
|
||||
gVhtMpduLen=2
|
||||
|
||||
#Enable or Disable p2p device address administered
|
||||
isP2pDeviceAddrAdministrated=1
|
||||
|
||||
#Enable VHT on 2.4Ghz
|
||||
isP2pDeviceAddrAdministrated=0
|
||||
gEnableVhtFor24GHzBand=1
|
||||
|
||||
#Maximum number of offload peers supported
|
||||
# gMaxOffloadPeers=2
|
||||
|
||||
# controlling the following offload patterns
|
||||
# through ini parameter. Default value is 1
|
||||
# to disable set it to zero. ssdp = 0
|
||||
# Setup multicast pattern for mDNS 224.0.0.251,
|
||||
# SSDP 239.255.255.250 and LLMNR 224.0.0.252
|
||||
ssdp=0
|
||||
|
||||
# RA filtering rate limit param, the current value would not
|
||||
# help if the lifetime in RA is less than 3*60=3min. Then
|
||||
# we need to change it, though it is uncommon.
|
||||
# gRAFilterEnable=0
|
||||
gRArateLimitInterval=600
|
||||
|
||||
# Maximum number of concurrent connections
|
||||
gMaxConcurrentActiveSessions=3
|
||||
|
||||
# Disable/Enable GreenAP
|
||||
# 0 to disable, 1 to enable, default: 1
|
||||
gEnableGreenAp=1
|
||||
|
||||
#Enable/Disable LPASS support
|
||||
# 0 to disable, 1 to enable
|
||||
gEnableLpassSupport=1
|
||||
|
||||
# Whether userspace country code setting shld have priority
|
||||
gCountryCodePriority=1
|
||||
|
||||
# Enable or Disable Multi-user MIMO
|
||||
# 1=Enable (default), 0=Disable
|
||||
gEnableMuBformee=1
|
||||
|
||||
# Enable support for TDLS
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
gEnableTDLSSupport=1
|
||||
|
||||
# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall
|
||||
# initiate TDLS Discovery towards a peer whenever setup criteria (throughput
|
||||
# and RSSI) is met and then will initiate teardown when teardown criteria
|
||||
# (idle packet count and RSSI) is met.
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
gEnableTDLSImplicitTrigger=1
|
||||
|
||||
# Enable TDLS External Control. That is, user space application has to
|
||||
# first configure a peer MAC in wlan driver towards which TDLS is desired.
|
||||
# Device will establish TDLS only towards those configured peers whenever
|
||||
# TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS
|
||||
# when teardown criteria (idle packet count and RSSI) is met. However,
|
||||
# device will accept TDLS connection if it is initiated from any other peer,
|
||||
# even if that peer is not configured.
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
# For TDLS External Control, Implicit Trigger must also be enabled.
|
||||
gTDLSExternalControl=1
|
||||
gEnableTDLSOffChannel=1
|
||||
|
||||
# Enable support for TDLS off-channel operation
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
# TDLS off-channel operation will be invoked when there is only one
|
||||
# TDLS connection.
|
||||
gEnableTDLSOffChannel=0
|
||||
|
||||
gEnableTDLSScan=1
|
||||
|
||||
# VHT Tx/Rx MCS values
|
||||
# Valid values are 0,1,2. If commented out, the default value is 0.
|
||||
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
|
||||
################ Datapath feature set Begin ################
|
||||
gBusBandwidthHighThreshold=2000
|
||||
gBusBandwidthMediumThreshold=500
|
||||
gBusBandwidthLowThreshold=150
|
||||
gBusBandwidthComputeInterval=100
|
||||
gVhtRxMCS=2
|
||||
gVhtTxMCS=2
|
||||
|
||||
# VHT Tx/Rx MCS values for 2x2
|
||||
# Valid values are 0,1,2. If commented out, the default value is 0.
|
||||
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
|
||||
gEnable2x2=1
|
||||
gVhtRxMCS2x2=2
|
||||
gVhtTxMCS2x2=2
|
||||
|
||||
#IPA config is a bit mask and following are the configurations.
|
||||
#bit0 IPA Enable
|
||||
#bit1 IPA PRE Filter enable
|
||||
#bit2 IPv6 enable
|
||||
#bit3 IPA Resource Manager (RM) enable
|
||||
#bit4 IPA Clock scaling enable
|
||||
#bit5 IPA uC ENABLE
|
||||
#bit6 IPA uC STA ENABLE
|
||||
#bit8 IPA Real Time Debugging
|
||||
gIPAConfig=0x7d
|
||||
gIPADescSize=800
|
||||
|
||||
# Enable TCP Segmentation Offload
|
||||
# 1 - enable 0 - disable
|
||||
dp_tx_ring_size=5120
|
||||
dp_tx_compl_ring_size=8192
|
||||
dp_tx_desc=6144
|
||||
dp_tx_ext_desc=6144
|
||||
gReorderOffloadSupported=1
|
||||
gCEClassifyEnable=1
|
||||
rx_mode=20
|
||||
gEnableFastPath=1
|
||||
gEnableIpTcpUdpChecksumOffload=1
|
||||
TSOEnable=1
|
||||
|
||||
# Enable Generic Receive Offload
|
||||
# 1 - enable(default) 0 - disable
|
||||
GROEnable=1
|
||||
|
||||
# Enable HT MPDU Density
|
||||
# 4 for 2 micro sec
|
||||
ght_mpdu_density=4
|
||||
|
||||
# Enable flow steering to enable multiple CEs for Rx flows.
|
||||
# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs.
|
||||
# Parallel Rx paths.
|
||||
# 1 - enable 0 - disable(default)
|
||||
gEnableFlowSteering=1
|
||||
|
||||
# RPS map for different RX queues (seperate by spaces)
|
||||
# Internally, the nibbles get swapped.
|
||||
rpsRxQueueCpuMapList=f7
|
||||
|
||||
# Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND
|
||||
ce_service_max_yield_time=500
|
||||
ce_service_max_rx_ind_flush=1
|
||||
maxMSDUsPerRxInd=8
|
||||
gEnableNUDTracking=1
|
||||
rpsRxQueueCpuMapList=f3
|
||||
legacy_mode_csum_disable=1
|
||||
icmp_req_to_fw_mark_interval=200
|
||||
|
||||
################ Datapath feature set End ################
|
||||
|
||||
################ NAN feature set start ###################
|
||||
|
||||
# Enable NAN discovery (NAN 1.0)
|
||||
# 1 - enable 0 - disable(default)
|
||||
gEnableNanSupport=0
|
||||
# Enable NAN Datapath
|
||||
genable_nan_datapath=0
|
||||
|
||||
################ NAN feature set end #####################
|
||||
|
||||
adaptive_dwell_mode_enabled=1
|
||||
hostscan_adaptive_dwell_mode=1
|
||||
|
||||
|
||||
oce_enable_probe_req_deferral=0
|
||||
|
||||
oce_enable_probe_req_rate=0
|
||||
|
||||
enable_esp_for_roam=0
|
||||
|
||||
# Enable the FW crash inject
|
||||
gEnableForceTargetAssert=1
|
||||
|
||||
|
||||
#Ignore peer information
|
||||
gIgnorePeerErpInfo=1
|
||||
|
||||
#Enable Broadcast probe response.
|
||||
g_enable_bcast_probe_rsp=0
|
||||
|
||||
# Enable/Disable rtt sta mac randomization
|
||||
adapt_dwell_lpf_weight=80
|
||||
adapt_dwell_wifi_act_threshold=10
|
||||
enable_rtt_mac_randomization=1
|
||||
|
||||
#Enable/Disable SNR monitoring
|
||||
gEnableSNRMonitoring=1
|
||||
|
||||
# HTC Credit count for WMI operation
|
||||
# 1 to serialize the WMI commands
|
||||
# 0 default works with FW advertised credits, 2 credits usually
|
||||
gWmiCreditCount=1
|
||||
|
||||
# Enable enhanced ACS
|
||||
acs_with_more_param=1
|
||||
# bits 0-3: rssi weight
|
||||
# bits 4-7: bss count weight
|
||||
# bits 8-11: noise floor weight
|
||||
# bits 12-15: channel free weight
|
||||
# bits 16-19: tx power range weight
|
||||
# bits 20-23: tx power throughput weight
|
||||
# bits 24-31: reserved
|
||||
AutoChannelSelectWeight=0x00fafafa
|
||||
|
||||
# Enable/Disable broadcast TWT
|
||||
bcast_twt=1
|
||||
|
||||
# Enable Runtime PM
|
||||
# 0 - RTPM disabled, so CxPC aware RTPM will be disabled as well
|
||||
# 1 - RTPM enabled, but CxPC aware RTPM disabled (i.e, Static Runtime PM)
|
||||
# 2 - RTPM enabled and CxPC aware RTPM enabled as well (i.e, Dynamic Runtime PM)
|
||||
gRuntimePM=2
|
||||
gRuntimePMDelay=500
|
||||
|
||||
# Enable broadcast logging to the userspace entities
|
||||
gMulticastHostFwMsgs=1
|
||||
# Disable packetlog explicitly
|
||||
gEnablePacketLog=0
|
||||
gfine_time_meas_cap=0x0030D
|
||||
|
||||
# Set IPA bandwidth levels in mbps
|
||||
gIPALowBandwidthMbps=100
|
||||
gIPAMediumBandwidthMbps=400
|
||||
gIPAHighBandwidthMbps=800
|
||||
|
||||
# Enable wlm_latency_enable feature
|
||||
# 0 - disable, 1 - enable(default)
|
||||
wlm_latency_enable=1
|
||||
|
||||
# This ini is used to give higher priority for 5g scc than dbs.
|
||||
# It is bitmap per enum policy_mgr_con_mode.
|
||||
# For example in GO+STA(5G) mode, when TPUT is onfigured as wlan system
|
||||
# preference option, If 5G SCC needs higher priority than dbs, set it as 8.
|
||||
active_max_channel_time_2g=80
|
||||
gPassiveMaxChannelTime=110
|
||||
g_prefer_5g_scc_to_dbs=8
|
||||
|
||||
#Add another interface while driver load
|
||||
gEnableConcurrentSTA=wlan1
|
||||
#Enable ETSII SRD channels for ACS
|
||||
etsi13_srd_chan_in_master_mode=1
|
||||
|
||||
# Disable channel bonding mode 24GHZ
|
||||
gChannelBondingMode24GHz=0
|
||||
|
||||
#acs_policy - External ACS policy control
|
||||
#0 -Preferable for ACS
|
||||
#1 -Mandatory for ACS
|
||||
acs_policy=0
|
||||
|
||||
#0 - Disallow STA+SAP SCC on DFS channel
|
||||
#1 - Allow STA+SAP SCC on DFS channel with master mode disabled
|
||||
#2-2 - enhance "1"
|
||||
g_sta_sap_scc_on_dfs_chan=0
|
||||
|
||||
# 1 - Enable the host silent recovery
|
||||
# 0 - Disable the host silent recovery
|
||||
gEnableSelfRecovery=1
|
||||
|
||||
# turning QC BLM parameters
|
||||
avoid_list_expiry_time=5
|
||||
black_list_expiry_time=1
|
||||
bad_bssid_counter_thresh=10
|
||||
|
||||
END
|
||||
|
||||
# Note: Configuration parser would not read anything past the END marker
|
||||
|
|
|
|||
|
|
@ -1,10 +1,25 @@
|
|||
# This file allows user to override the factory
|
||||
# defaults for the WLAN Driver
|
||||
|
||||
# Disable channel bonding mode 24GHZ
|
||||
gChannelBondingMode24GHz=0
|
||||
|
||||
# IKSWO-42425: Enable user triggered SSR
|
||||
gEnableForceTargetAssert=1
|
||||
|
||||
# Enable IMPS or not
|
||||
gEnableImps=1
|
||||
|
||||
# Enable BMPS or not
|
||||
gEnableBmps=1
|
||||
|
||||
# Enable PCI gen switch
|
||||
g_enable_pci_gen=1
|
||||
|
||||
# Phy Mode (auto, b, g, n, etc)
|
||||
# Valid values are 0-12, with 0(Min) = Auto, 12(Max) = 11ax
|
||||
# 1 = 11abg, 2 = 11b, 3 = 11g, 4 = 11n, 5 = 11g only, 6 = 11n only
|
||||
# 7 = 11b only 8 = 11ac only, 9 = 11ac, 12 = 11ax.
|
||||
# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
|
||||
# 1 = 11abg, 2 = 11b, 3 = 11g, 5 = 11g only, 6 = 11n only
|
||||
# 7 = 11b only 8 = 11ac only.
|
||||
gDot11Mode=0
|
||||
|
||||
# UAPSD service interval for VO,VI, BE, BK traffic
|
||||
|
|
@ -16,9 +31,22 @@ InfraUapsdBkSrvIntv=0
|
|||
# Flag to allow STA send AddTspec even when ACM is Off
|
||||
gAddTSWhenACMIsOff=1
|
||||
|
||||
|
||||
#Flag to enable HostARPOffload feature or not
|
||||
hostArpOffload=1
|
||||
|
||||
#Flag to enable HostNSOffload feature or not
|
||||
hostNSOffload=1
|
||||
|
||||
# 802.11n Protection flag
|
||||
gEnableApProt=1
|
||||
|
||||
#Enable OBSS protection
|
||||
gEnableApOBSSProt=1
|
||||
|
||||
#Enable/Disable UAPSD for SoftAP
|
||||
gEnableApUapsd=1
|
||||
|
||||
# Maximum Tx power
|
||||
# gTxPowerCap=30
|
||||
|
||||
|
|
@ -28,25 +56,52 @@ gEnableApOBSSProt=1
|
|||
# RTS threshold
|
||||
RTSThreshold=1048576
|
||||
|
||||
# Intra-BSS forward
|
||||
gDisableIntraBssFwd=0
|
||||
|
||||
# WMM Enable/Disable
|
||||
WmmIsEnabled=0
|
||||
|
||||
# 802.11d support
|
||||
g11dSupportEnabled=0
|
||||
|
||||
# 802.11h support
|
||||
g11hSupportEnabled=1
|
||||
|
||||
# DFS Master Capability
|
||||
gEnableDFSMasterCap=1
|
||||
|
||||
# ESE Support and fast transition
|
||||
EseEnabled=0
|
||||
|
||||
ImplicitQosIsEnabled=0
|
||||
|
||||
gNeighborScanTimerPeriod=200
|
||||
gNeighborLookupThreshold=76
|
||||
gNeighborScanChannelMinTime=20
|
||||
|
||||
# Legacy (non-ESE, non-802.11r) Fast Roaming Support
|
||||
# To enable, set FastRoamEnabled=1
|
||||
# To disable, set FastRoamEnabled=0
|
||||
FastRoamEnabled=1
|
||||
|
||||
# Check if the AP to which we are roaming is better than current AP in
|
||||
# terms of RSSI. Checking is disabled if set to Zero.Otherwise it will
|
||||
# use this value as to how better the RSSI of the new/roamable AP should
|
||||
# be for roaming
|
||||
RoamRssiDiff=5
|
||||
|
||||
# To enable, set gRoamIntraBand=1 (Roaming within band)
|
||||
# To disable, set gRoamIntraBand=0 (Roaming across band)
|
||||
gRoamIntraBand=0
|
||||
|
||||
#Short Guard Interval Enable/disable
|
||||
gShortGI20Mhz=1
|
||||
gShortGI40Mhz=1
|
||||
|
||||
#Auto Shutdown wlan : Value in Seconds. 0 means disabled. Max 1 day = 86400 sec
|
||||
gWlanAutoShutdown = 0
|
||||
|
||||
#Channel Bonding
|
||||
gChannelBondingMode5GHz=1
|
||||
|
||||
|
|
@ -68,9 +123,15 @@ gChannelBondingMode5GHz=1
|
|||
#gApLinkMonitorPeriod = 10
|
||||
#gGoLinkMonitorPeriod = 10
|
||||
|
||||
#gApKeepAlivePeriod is time to spend to check whether frame
|
||||
#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame
|
||||
#are succeed to send or not. Hence total effective detection time is
|
||||
#(gApLinkMonitorPeriod + gApKeepAlivePeriod)
|
||||
# (gGoLinkMonitorPeriod + gGoKeepAlivePeriod) /
|
||||
# (gApLinkMonitorPeriod + gApKeepAlivePeriod)
|
||||
gGoKeepAlivePeriod = 20
|
||||
gApKeepAlivePeriod = 20
|
||||
|
||||
#If set to 0, will not scan DFS channels
|
||||
gEnableDFSChnlScan=1
|
||||
|
||||
# Enable DFS channel roam
|
||||
# 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE
|
||||
|
|
@ -78,6 +139,9 @@ gAllowDFSChannelRoam=1
|
|||
|
||||
gVhtChannelWidth=2
|
||||
|
||||
#Data Inactivity Timeout when in powersave (in ms)
|
||||
gDataInactivityTimeout=200
|
||||
|
||||
# Set txchainmask and rxchainmask
|
||||
# These parameters are used only if gEnable2x2 is 0
|
||||
# Valid values are 1,2
|
||||
|
|
@ -86,6 +150,14 @@ gVhtChannelWidth=2
|
|||
gSetTxChainmask1x1=1
|
||||
gSetRxChainmask1x1=1
|
||||
|
||||
# Scan Timing Parameters
|
||||
# gPassiveMaxChannelTime=110
|
||||
# gPassiveMinChannelTime=60
|
||||
gActiveMaxChannelTime=40
|
||||
|
||||
#If set to 0, MCC is not allowed.
|
||||
gEnableMCCMode=1
|
||||
|
||||
# MCC to SCC Switch mode:
|
||||
# 0-Disable
|
||||
# 1-Enable
|
||||
|
|
@ -95,9 +167,18 @@ gSetRxChainmask1x1=1
|
|||
# without SAP restart by sending (E)CSA
|
||||
gWlanMccToSccSwitchMode = 3
|
||||
|
||||
# 1=enable STBC; 0=disable STBC
|
||||
gEnableRXSTBC=1
|
||||
|
||||
# 1=enable tx STBC; 0=disable
|
||||
gEnableTXSTBC=1
|
||||
|
||||
# 1=enable rx LDPC; 0=disable
|
||||
gEnableRXLDPC=1
|
||||
|
||||
#Enable/Disable Tx beamforming
|
||||
gTxBFEnable=1
|
||||
|
||||
#Enable/Disable Tx beamformee in SAP mode
|
||||
gEnableTxBFeeSAP=1
|
||||
|
||||
|
|
@ -106,12 +187,22 @@ gEnableTxBFeeSAP=1
|
|||
# 0=disable, 1=enable
|
||||
gEnableTxBFin20MHz=1
|
||||
|
||||
#Enable/Disable SU Tx beamformer support
|
||||
#Enable/Disable SU Tx beamformer support.
|
||||
gEnableTxSUBeamformer=1
|
||||
|
||||
gEnableFastRoamInConcurrency=1
|
||||
|
||||
# 802.11K support
|
||||
gRrmEnable=1
|
||||
|
||||
#Enable firmware uart print
|
||||
gEnablefwprint=0
|
||||
|
||||
# Firmware log mode
|
||||
# Valid values are 0,1,2
|
||||
# 0=Disable, 1=WMI, 2=DIAG
|
||||
gEnablefwlog=1
|
||||
|
||||
# Maximum Receive AMPDU size (VHT only. Valid values:
|
||||
# 0->8k 1->16k 2->32k 3->64k 4->128k)
|
||||
gVhtAmpduLenExponent=7
|
||||
|
|
@ -120,8 +211,26 @@ gVhtAmpduLenExponent=7
|
|||
# 0->3895 octets, 1->7991 octets, 2->11454 octets)
|
||||
gVhtMpduLen=2
|
||||
|
||||
# Maximum number of wow filters required
|
||||
#gMaxWoWFilters=22
|
||||
|
||||
# WOW Enable/Disable.
|
||||
# 0 - Disable both magic pattern match and pattern byte match.
|
||||
# 1 - Enable magic pattern match on all interfaces.
|
||||
# 2 - Enable pattern byte match on all interfaces.
|
||||
# 3 - Enable both magic pattern and pattern byte match on all interfaces.
|
||||
# Default value of gEnableWoW is 3.
|
||||
# gEnableWoW=0
|
||||
|
||||
# Enable or Disable MCC Adaptive Scheduler at the FW
|
||||
# 1=Enable (default), 0=Disable
|
||||
gEnableMCCAdaptiveScheduler=1
|
||||
|
||||
#Enable or Disable p2p device address administered
|
||||
isP2pDeviceAddrAdministrated=0
|
||||
isP2pDeviceAddrAdministrated=1
|
||||
|
||||
# Remove Overlap channel restriction
|
||||
gEnableOverLapCh=0
|
||||
|
||||
#Enable VHT on 2.4Ghz
|
||||
gEnableVhtFor24GHzBand=1
|
||||
|
|
@ -136,6 +245,9 @@ gEnableVhtFor24GHzBand=1
|
|||
# SSDP 239.255.255.250 and LLMNR 224.0.0.252
|
||||
ssdp=0
|
||||
|
||||
#Enable Memory Deep Sleep
|
||||
gEnableMemDeepSleep=1
|
||||
|
||||
# RA filtering rate limit param, the current value would not
|
||||
# help if the lifetime in RA is less than 3*60=3min. Then
|
||||
# we need to change it, though it is uncommon.
|
||||
|
|
@ -149,6 +261,8 @@ gMaxConcurrentActiveSessions=3
|
|||
# 0 to disable, 1 to enable, default: 1
|
||||
gEnableGreenAp=0
|
||||
|
||||
gPNOScanSupport=1
|
||||
|
||||
#Enable/Disable LPASS support
|
||||
# 0 to disable, 1 to enable
|
||||
gEnableLpassSupport=1
|
||||
|
|
@ -156,10 +270,16 @@ gEnableLpassSupport=1
|
|||
# Whether userspace country code setting shld have priority
|
||||
gCountryCodePriority=1
|
||||
|
||||
# Enable(1)/Disable(0) SIFS burst
|
||||
gEnableSifsBurst=1
|
||||
|
||||
# Enable or Disable Multi-user MIMO
|
||||
# 1=Enable (default), 0=Disable
|
||||
gEnableMuBformee=1
|
||||
|
||||
# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode
|
||||
gIbssTxSpEndInactivityTime=10
|
||||
|
||||
# Enable TDLS External Control. That is, user space application has to
|
||||
# first configure a peer MAC in wlan driver towards which TDLS is desired.
|
||||
# Device will establish TDLS only towards those configured peers whenever
|
||||
|
|
@ -179,6 +299,19 @@ gTDLSExternalControl=1
|
|||
# TDLS connection.
|
||||
gEnableTDLSOffChannel=1
|
||||
|
||||
# Enable or Disable Random MAC (Spoofing)
|
||||
# 1=Enable (default), 0=Disable
|
||||
gEnableMacAddrSpoof=1
|
||||
|
||||
################ Datapath feature set Begin ################
|
||||
# Bus bandwidth threshold values in terms of number of packets
|
||||
gBusBandwidthHighThreshold=2000
|
||||
gBusBandwidthMediumThreshold=500
|
||||
gBusBandwidthLowThreshold=150
|
||||
|
||||
# Bus bandwidth compute timeout value in ms
|
||||
gBusBandwidthComputeInterval=100
|
||||
|
||||
# VHT Tx/Rx MCS values
|
||||
# Valid values are 0,1,2. If commented out, the default value is 0.
|
||||
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
|
||||
|
|
@ -204,11 +337,32 @@ gVhtTxMCS2x2=2
|
|||
gIPAConfig=0x7d
|
||||
gIPADescSize=800
|
||||
|
||||
# Increase TCL ringsize
|
||||
dp_tx_ring_size=3072
|
||||
# Set IPA bandwidth levels in mbps
|
||||
gIPALowBandwidthMbps=100
|
||||
gIPAMediumBandwidthMbps=400
|
||||
gIPAHighBandwidthMbps=800
|
||||
|
||||
# Disable HW checksum for legacy modes
|
||||
legacy_mode_csum_disable=1
|
||||
# Set CPU mask for RPS Rx queue
|
||||
rpsRxQueueCpuMapList=07
|
||||
|
||||
# Enable/Disable RX full reorder offload
|
||||
gReorderOffloadSupported=1
|
||||
|
||||
# Enable CE classification
|
||||
# 1 - enable(default) 0 - disable
|
||||
gCEClassifyEnable=1
|
||||
|
||||
# Enable Rx handling options
|
||||
# Rx_thread=1 RPS=2(default for ROME) NAPI=4(default for ihelium)
|
||||
rx_mode=20
|
||||
|
||||
# Enable(Tx) fastpath for data traffic.
|
||||
# 1 - enable(default) 0 - disable
|
||||
gEnableFastPath=1
|
||||
|
||||
# This flag enables IP, TCP and UDP checksum offload
|
||||
# 1 - enable(default) 0 - disable
|
||||
gEnableIpTcpUdpChecksumOffload=1
|
||||
|
||||
# Enable TCP Segmentation Offload
|
||||
# 1 - enable 0 - disable
|
||||
|
|
@ -228,21 +382,18 @@ ght_mpdu_density=4
|
|||
# 1 - enable 0 - disable(default)
|
||||
gEnableFlowSteering=1
|
||||
|
||||
# Enable Rx FISA support
|
||||
# 0 - disable(default for non-QCA6490), 1 - enable(default for QCA6490)
|
||||
dp_rx_fisa_enable=1
|
||||
# Time in microseconds after which a NAPI poll must yield
|
||||
ce_service_max_yield_time=500
|
||||
|
||||
# FISA FSE flow table size
|
||||
dp_rx_flow_search_table_size=128
|
||||
#Maximum number of HTT messages to be processed per NAPI poll
|
||||
ce_service_max_rx_ind_flush=1
|
||||
|
||||
# Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND
|
||||
maxMSDUsPerRxInd=8
|
||||
|
||||
gHandleLatencyCriticalClients=1
|
||||
|
||||
# RPS map for different RX queues (seperate by spaces)
|
||||
# Internally, the nibbles get swapped.
|
||||
rpsRxQueueCpuMapList=f7
|
||||
# Enable NUD tracking feature
|
||||
# 1 - enable 0 - disable(default)
|
||||
gEnableNUDTracking=1
|
||||
|
||||
################ Datapath feature set End ################
|
||||
|
||||
|
|
@ -250,70 +401,85 @@ rpsRxQueueCpuMapList=f7
|
|||
|
||||
# Enable NAN discovery (NAN 1.0)
|
||||
# 1 - enable 0 - disable(default)
|
||||
gEnableNanSupport=1
|
||||
gEnableNanSupport=0
|
||||
# Enable NAN Datapath
|
||||
genable_nan_datapath=1
|
||||
genable_nan_datapath=0
|
||||
|
||||
################ NAN feature set end #####################
|
||||
# Flag to enable/disable FILS element in Probe Request
|
||||
g_enable_bcast_probe_rsp=0
|
||||
|
||||
enable_scoring_for_roam=0
|
||||
|
||||
oce_enable_probe_req_deferral=0
|
||||
|
||||
oce_enable_probe_req_rate=0
|
||||
|
||||
enable_esp_for_roam=0
|
||||
|
||||
adaptive_dwell_mode_enabled=1
|
||||
|
||||
hostscan_adaptive_dwell_mode=1
|
||||
|
||||
adapt_dwell_lpf_weight=80
|
||||
|
||||
adapt_dwell_wifi_act_threshold=10
|
||||
|
||||
MAWCEnabled=0
|
||||
|
||||
# Enable/Disable rtt sta mac randomization
|
||||
enable_rtt_mac_randomization=1
|
||||
|
||||
#Enable/Disable SNR monitoring
|
||||
gEnableSNRMonitoring=1
|
||||
|
||||
# HTC Credit count for WMI operation
|
||||
# 1 to serialize the WMI commands
|
||||
# 0 default works with FW advertised credits, 2 credits usually
|
||||
gWmiCreditCount=1
|
||||
|
||||
# Enable enhanced ACS
|
||||
acs_with_more_param=1
|
||||
# bits 0-3: rssi weight
|
||||
# bits 4-7: bss count weight
|
||||
# bits 8-11: noise floor weight
|
||||
# bits 12-15: channel free weight
|
||||
# bits 16-19: tx power range weight
|
||||
# bits 20-23: tx power throughput weight
|
||||
# bits 24-31: reserved
|
||||
AutoChannelSelectWeight=0x00fafafa
|
||||
|
||||
# Enable/Disable broadcast TWT
|
||||
bcast_twt=1
|
||||
|
||||
# Enable Runtime PM
|
||||
# 0 - RTPM disabled, so CxPC aware RTPM will be disabled as well
|
||||
# 1 - RTPM enabled, but CxPC aware RTPM disabled (i.e, Static Runtime PM)
|
||||
# 2 - RTPM enabled and CxPC aware RTPM enabled as well (i.e, Dynamic Runtime PM)
|
||||
gRuntimePM=2
|
||||
gRuntimePMDelay=500
|
||||
|
||||
active_max_channel_time_6g=60
|
||||
passive_max_channel_time_6g=60
|
||||
# Rx thread affinity mask in UL case
|
||||
RX_THREAD_UL_CPU_AFFINITY_MASK=0xc0
|
||||
|
||||
# Enable broadcast logging to the userspace entities
|
||||
gMulticastHostFwMsgs=1
|
||||
# Disable packetlog explicitly
|
||||
gEnablePacketLog=0
|
||||
AutoChannelSelectWeight=0x00fafafa
|
||||
|
||||
# Set IPA bandwidth levels in mbps
|
||||
gIPALowBandwidthMbps=100
|
||||
gIPAMediumBandwidthMbps=400
|
||||
gIPAHighBandwidthMbps=800
|
||||
bcast_twt=1
|
||||
|
||||
# Enable wlm_latency_enable feature
|
||||
# 0 - disable, 1 - enable(default)
|
||||
wlm_latency_enable=1
|
||||
spectral_disable=1
|
||||
dp_tx_ring_size=3072
|
||||
|
||||
# This ini is used to give higher priority for 5g scc than dbs.
|
||||
# It is bitmap per enum policy_mgr_con_mode.
|
||||
# For example in GO+STA(5G) mode, when TPUT is onfigured as wlan system
|
||||
# preference option, If 5G SCC needs higher priority than dbs, set it as 8.
|
||||
g_prefer_5g_scc_to_dbs=8
|
||||
gWmiCreditCount=1
|
||||
|
||||
# Enable RX buffer pool
|
||||
dp_rx_buff_prealloc_pool=1
|
||||
|
||||
#Enable RX FISA
|
||||
dp_rx_fisa_enable=1
|
||||
dp_rx_flow_search_table_size=128
|
||||
|
||||
legacy_mode_csum_disable=0
|
||||
|
||||
#Enable Rx refill pool
|
||||
dp_rx_refill_buff_pool=1
|
||||
|
||||
# Enable Software latency manager
|
||||
gEnableSWLM=1
|
||||
|
||||
# Place FST in CMEM
|
||||
dp_rx_fst_in_cmem=1
|
||||
|
||||
# Use QMI path to get LL and station stats
|
||||
send_ll_and_get_station_stats_over_qmi=1
|
||||
|
||||
#enable 6GHz support for RTT/LOWI
|
||||
oem_6g_support_disable=0
|
||||
|
||||
# 1 - Enable the host silent recovery
|
||||
# 0 - Disable the host silent recovery
|
||||
gEnableSelfRecovery=1
|
||||
|
||||
# turning QC BLM parameters
|
||||
avoid_list_expiry_time=5
|
||||
black_list_expiry_time=1
|
||||
bad_bssid_counter_thresh=10
|
||||
END
|
||||
|
||||
# Note: Configuration parser would not read anything past the END marker
|
||||
124
wifi/wlan/WCNSS_qcom_cfg.ini
Normal file
124
wifi/wlan/WCNSS_qcom_cfg.ini
Normal file
|
|
@ -0,0 +1,124 @@
|
|||
# This file allows user to override the factory
|
||||
# defaults for the WLAN Driver
|
||||
|
||||
fw_timeout_crash=1
|
||||
gDot11Mode=0
|
||||
InfraUapsdVoSrvIntv=0
|
||||
InfraUapsdViSrvIntv=0
|
||||
InfraUapsdBeSrvIntv=0
|
||||
InfraUapsdBkSrvIntv=0
|
||||
gAddTSWhenACMIsOff=1
|
||||
gEnableApOBSSProt=1
|
||||
RTSThreshold=1048576
|
||||
gDisableIntraBssFwd=0
|
||||
g11dSupportEnabled=0
|
||||
gEnableDFSMasterCap=1
|
||||
gNeighborScanTimerPeriod=200
|
||||
gNeighborLookupThreshold=76
|
||||
gNeighborScanChannelMinTime=20
|
||||
FastRoamEnabled=1
|
||||
RoamRssiDiff=5
|
||||
gRoamIntraBand=0
|
||||
gChannelBondingMode5GHz=1
|
||||
gEnableDFSChnlScan=1
|
||||
gAllowDFSChannelRoam=1
|
||||
gSetTxChainmask1x1=1
|
||||
gSetRxChainmask1x1=1
|
||||
gWlanMccToSccSwitchMode = 3
|
||||
gEnableTXSTBC=1
|
||||
gEnableTxBFeeSAP=1
|
||||
gEnableTxBFin20MHz=1
|
||||
gEnableTxSUBeamformer=1
|
||||
gRrmEnable=1
|
||||
gEnablefwprint=0
|
||||
gVhtAmpduLenExponent=7
|
||||
gVhtMpduLen=2
|
||||
|
||||
# WOW Enable/Disable.
|
||||
# 0 - Disable both magic pattern match and pattern byte match.
|
||||
# 1 - Enable magic pattern match on all interfaces.
|
||||
# 2 - Enable pattern byte match on all interfaces.
|
||||
# 3 - Enable both magic pattern and pattern byte match on all interfaces.
|
||||
# Default value of gEnableWoW is 3.
|
||||
# gEnableWoW=0
|
||||
|
||||
#Enable or Disable p2p device address administered
|
||||
isP2pDeviceAddrAdministrated=1
|
||||
|
||||
#Enable VHT on 2.4Ghz
|
||||
gEnableVhtFor24GHzBand=1
|
||||
gEnableLpassSupport=1
|
||||
gCountryCodePriority=1
|
||||
gEnableMuBformee=1
|
||||
gTDLSExternalControl=1
|
||||
gEnableTDLSOffChannel=1
|
||||
|
||||
################ Datapath feature set Begin ################
|
||||
gBusBandwidthHighThreshold=2000
|
||||
gBusBandwidthMediumThreshold=500
|
||||
gBusBandwidthLowThreshold=150
|
||||
gBusBandwidthComputeInterval=100
|
||||
gVhtRxMCS=2
|
||||
gVhtTxMCS=2
|
||||
gEnable2x2=1
|
||||
gVhtRxMCS2x2=2
|
||||
gVhtTxMCS2x2=2
|
||||
gIPAConfig=0x7d
|
||||
gIPADescSize=800
|
||||
dp_tx_ring_size=5120
|
||||
dp_tx_compl_ring_size=8192
|
||||
dp_tx_desc=6144
|
||||
dp_tx_ext_desc=6144
|
||||
gReorderOffloadSupported=1
|
||||
gCEClassifyEnable=1
|
||||
rx_mode=20
|
||||
gEnableFastPath=1
|
||||
gEnableIpTcpUdpChecksumOffload=1
|
||||
TSOEnable=1
|
||||
GROEnable=1
|
||||
ght_mpdu_density=4
|
||||
gEnableFlowSteering=1
|
||||
ce_service_max_yield_time=500
|
||||
ce_service_max_rx_ind_flush=1
|
||||
maxMSDUsPerRxInd=8
|
||||
gEnableNUDTracking=1
|
||||
dp_rx_fisa_enable=1
|
||||
dp_rx_flow_search_table_size=128
|
||||
rpsRxQueueCpuMapList=07
|
||||
legacy_mode_csum_disable=1
|
||||
icmp_req_to_fw_mark_interval=200
|
||||
|
||||
################ Datapath feature set End ################
|
||||
|
||||
adaptive_dwell_mode_enabled=1
|
||||
hostscan_adaptive_dwell_mode=1
|
||||
adapt_dwell_lpf_weight=80
|
||||
adapt_dwell_wifi_act_threshold=10
|
||||
enable_rtt_mac_randomization=1
|
||||
gEnableSNRMonitoring=1
|
||||
gWmiCreditCount=1
|
||||
acs_with_more_param=1
|
||||
AutoChannelSelectWeight=0x00fafafa
|
||||
bcast_twt=1
|
||||
gRuntimePM=2
|
||||
gRuntimePMDelay=500
|
||||
gEnablePacketLog=0
|
||||
gfine_time_meas_cap=0x0030D
|
||||
oem_6g_support_disable=0
|
||||
|
||||
active_max_channel_time_2g=80
|
||||
active_max_channel_time_6g=60
|
||||
gPassiveMaxChannelTime=110
|
||||
passive_max_channel_time_6g=60
|
||||
g_prefer_5g_scc_to_dbs=8
|
||||
|
||||
# Enable cocurrent interface wlan1
|
||||
gEnableConcurrentSTA=wlan1
|
||||
|
||||
# Enable Indoor channel support for MHS to turn on in 6Ghz
|
||||
gindoor_channel_support=1
|
||||
|
||||
END
|
||||
|
||||
# Note: Configuration parser would not read anything past the END marker
|
||||
|
||||
|
|
@ -7,3 +7,4 @@ interworking=1
|
|||
config_methods=virtual_display virtual_push_button keypad
|
||||
driver_param="no_rrm=1"
|
||||
pmf=1
|
||||
sae_pwe=2
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue