android_device_motorola_sm6.../rootdir/etc/init.qcom.power.rc
Vivekachooz b96db6ee48
sm6375-common: Update permissions for powerhal
Change-Id: Id43043a24dd19eab0234def5121e811d18174096
2024-07-18 20:16:00 +05:30

195 lines
8.7 KiB
Text

# Copyright (c) 2016, Code Aurora Forum. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# * Neither the name of Code Aurora nor
# the names of its contributors may be used to endorse or promote
# products derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
on early-init
# Enable sched_boost
write /proc/sys/kernel/sched_boost 1
on init
# Set Permissions for Power HAL
chown system system /dev/stune/top-app/schedtune.boost
chmod 0664 /dev/stune/top-app/schedtune.boost
write /dev/stune/foreground/schedtune.sched_boost_no_override 1
write /dev/stune/top-app/schedtune.sched_boost_no_override 1
write /dev/stune/schedtune.colocate 0
write /dev/stune/background/schedtune.colocate 0
write /dev/stune/system-background/schedtune.colocate 0
write /dev/stune/foreground/schedtune.colocate 0
write /dev/stune/top-app/schedtune.colocate 1
# Disable UFS powersaving
write /sys/devices/platform/soc/${ro.boot.bootdevice}/clkgate_enable 0
write /sys/devices/platform/soc/${ro.boot.bootdevice}/hibern8_on_idle_enable 0
# Disable powersaving
write /sys/module/lpm_levels/parameters/sleep_disabled 1
# Bring all cores online
write /sys/devices/system/cpu/cpu0/online 1
write /sys/devices/system/cpu/cpu1/online 1
write /sys/devices/system/cpu/cpu2/online 1
write /sys/devices/system/cpu/cpu3/online 1
write /sys/devices/system/cpu/cpu4/online 1
write /sys/devices/system/cpu/cpu5/online 1
write /sys/devices/system/cpu/cpu6/online 1
write /sys/devices/system/cpu/cpu7/online 1
# Configure governor settings for little cluster
write /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor "schedutil"
write /sys/devices/system/cpu/cpu0/cpufreq/schedutil/up_rate_limit_us 500
write /sys/devices/system/cpu/cpu0/cpufreq/schedutil/down_rate_limit_us 20000
# Configure governor settings for big cluster
write /sys/devices/system/cpu/cpu6/cpufreq/scaling_governor "schedutil"
write /sys/devices/system/cpu/cpu6/cpufreq/schedutil/up_rate_limit_us 500
write /sys/devices/system/cpu/cpu6/cpufreq/schedutil/down_rate_limit_us 20000
# Set default schedTune value for foreground/top-app
write /dev/stune/foreground/schedtune.prefer_idle 1
write /dev/stune/top-app/schedtune.boost 10
write /dev/stune/top-app/schedtune.prefer_idle 1
on boot
# For cpusets initialize for Silver only first and then Silver + Gold
# Silver only configuration cannot work with 0-7
write /dev/cpuset/top-app/cpus 0-3
write /dev/cpuset/audio-app/cpus 1-2
write /dev/cpuset/foreground/cpus 0-3
write /dev/cpuset/foreground/boost/cpus 0-3
write /dev/cpuset/background/cpus 0-3
write /dev/cpuset/system-background/cpus 0-3
write /dev/cpuset/top-app/cpus 0-7
write /dev/cpuset/foreground/cpus 0-7
write /dev/cpuset/foreground/boost/cpus 0-7
write /dev/cpuset/background/cpus 0-7
write /dev/cpuset/system-background/cpus 0-7
# Disable console_suspend to get better logging for kernel crashes
write /sys/module/printk/parameters/console_suspend N
on property:init.svc.vendor.charger=running
setprop persist.sys.usb.config mass_storage
# Keep one LITTLE and one big
write /sys/devices/system/cpu/cpu1/online 0
write /sys/devices/system/cpu/cpu2/online 0
write /sys/devices/system/cpu/cpu3/online 0
write /sys/devices/system/cpu/cpu5/online 0
write /sys/devices/system/cpu/cpu6/online 0
write /sys/devices/system/cpu/cpu7/online 0
wait /dev/block/bootdevice
# Enable UFS powersaving
write /sys/devices/platform/soc/${ro.boot.bootdevice}/clkgate_enable 1
write /sys/devices/platform/soc/${ro.boot.bootdevice}/hibern8_on_idle_enable 1
# Turn on sleep modes
write /sys/module/lpm_levels/parameters/sleep_disabled 0
# Disable sched_boost
write /proc/sys/kernel/sched_boost 0
start vendor.power_off_alarm
mount tmpfs tmpfs /data
setprop sys.usb.controller 4e00000.dwc3
setprop sys.usb.configfs 1
on enable-low-power
# Set the default IRQ affinity to the silver cluster.
# When a CPU is isolated/hotplugged, the IRQ affinity is adjusted
# to one of the CPU from the default IRQ affinity mask.
write /proc/irq/default_smp_affinity "f"
# Setting b.L scheduler parameters
write /proc/sys/kernel/sched_upmigrate 95
write /proc/sys/kernel/sched_downmigrate 85
write /proc/sys/kernel/sched_group_upmigrate 100
write /proc/sys/kernel/sched_group_downmigrate 95
write /proc/sys/kernel/sched_walt_rotate_big_tasks 1
# Enable bus-dcvs
write /sys/class/devfreq/soc:qcom,cpu-cpu-ddr-bw/governor "bw_hwmon"
write /sys/class/devfreq/soc:qcom,cpu-cpu-ddr-bw/polling_interval 50
write /sys/class/devfreq/soc:qcom,cpu-cpu-ddr-bw/min_freq 762
write /sys/class/devfreq/soc:qcom,cpu-cpu-ddr-bw/bw_hwmon/mbps_zones "762 1144 1720 2086 2597 2929 3879 5161 5931"
write /sys/class/devfreq/soc:qcom,cpu-cpu-ddr-bw/bw_hwmon/sample_ms 4
write /sys/class/devfreq/soc:qcom,cpu-cpu-ddr-bw/bw_hwmon/io_percent 50
write /sys/class/devfreq/soc:qcom,cpu-cpu-ddr-bw/bw_hwmon/hist_memory 20
write /sys/class/devfreq/soc:qcom,cpu-cpu-ddr-bw/bw_hwmon/hyst_length 10
write /sys/class/devfreq/soc:qcom,cpu-cpu-ddr-bw/bw_hwmon/guard_band_mbps 0
write /sys/class/devfreq/soc:qcom,cpu-cpu-ddr-bw/bw_hwmon/up_scale 250
write /sys/class/devfreq/soc:qcom,cpu-cpu-ddr-bw/bw_hwmon/idle_mbps 1600
# Enable mem_latency governor for DDR scaling
write /sys/class/devfreq/soc:qcom,cpu0-cpu-ddr-lat/governor "mem_latency"
write /sys/class/devfreq/soc:qcom,cpu0-cpu-ddr-lat/polling_interval 10
write /sys/class/devfreq/soc:qcom,cpu0-cpu-ddr-lat/mem_latency/ratio_ceil 400
write /sys/class/devfreq/soc:qcom,cpu6-cpu-ddr-lat/governor "mem_latency"
write /sys/class/devfreq/soc:qcom,cpu6-cpu-ddr-lat/polling_interval 10
write /sys/class/devfreq/soc:qcom,cpu6-cpu-ddr-lat/mem_latency/ratio_ceil 400
# Enable mem_latency governor for L3 scaling
write /sys/class/devfreq/fd90100.qcom,cpu0-cpu-l3-lat/governor "mem_latency"
write /sys/class/devfreq/fd90100.qcom,cpu0-cpu-l3-lat/polling_interval 10
write /sys/class/devfreq/fd90100.qcom,cpu0-cpu-l3-lat/mem_latency/ratio_ceil 400
write /sys/class/devfreq/fd90100.qcom,cpu6-cpu-l3-lat/governor "mem_latency"
write /sys/class/devfreq/fd90100.qcom,cpu6-cpu-l3-lat/polling_interval 10
write /sys/class/devfreq/fd90100.qcom,cpu6-cpu-l3-lat/mem_latency/ratio_ceil 400
# Set cpuset parameters
write /dev/cpuset/background/cpus 0-1
write /dev/cpuset/system-background/cpus 0-3
write /dev/cpuset/foreground/boost/cpus 0-3,6-7
write /dev/cpuset/foreground/cpus 0-3,6-7
write /dev/cpuset/top-app/cpus 0-7
write /dev/cpuset/restricted/cpus 0-3
# Turn off scheduler boost at the end
write /proc/sys/kernel/sched_boost 0
# Turn on sleep modes
write /sys/module/lpm_levels/parameters/sleep_disabled 0
# Enable UFS powersaving
write /sys/devices/platform/soc/${ro.boot.bootdevice}/clkgate_enable 1
write /sys/devices/platform/soc/${ro.boot.bootdevice}/hibern8_on_idle_enable 1
write /proc/sys/vm/swappiness 100
write /proc/sys/vm/watermark_scale_factor 1
on property:sys.boot_completed=1
trigger enable-low-power
# If UART is on, enable console_suspend on boot_complete to save power
on property:sys.boot_completed=1 && property:init.svc.console=running
write /sys/module/printk/parameters/console_suspend Y
on property:init.svc.recovery=running
trigger enable-low-power