dre: Update Wi-Fi configs from OOS 11.0.6.0.DE17AA
Preserve read_mac_addr_from_mac_file while we are at it. Change-Id: I810e8cbf8755849b8ad2cdd9823e4627d0355408
This commit is contained in:
Albert Tang
parent
4844942afc
commit
47a821ffae
3 changed files with 148 additions and 179 deletions
|
|
@ -1,73 +1,25 @@
|
|||
# This file allows user to override the factory
|
||||
# defaults for the WLAN Driver
|
||||
# ifdef VENDOR_EDIT
|
||||
#yuquan.fei@CONNECTIVITY.WiFi, 2020/12/25,
|
||||
#Add for scan dev whose beacon is invalid with wrong length
|
||||
scan_allow_bss_with_corrupted_ie=1
|
||||
gDualMacFeatureDisable=6
|
||||
gInitialScanNoDFSChnl=1
|
||||
#gInitialDwellTime=20
|
||||
#ifndef VENDOR_EDIT
|
||||
#Use dynamic iwpriv to control
|
||||
#gSoftApMaxPeers=8
|
||||
#endif VENDOR_EDIT
|
||||
gRoamBmissFirstBcnt=15
|
||||
gRoamBmissFinalBcnt=25
|
||||
gDroppedPktDisconnectTh=1024
|
||||
# Runtime is default zero in hostdriver
|
||||
gRAFilterEnable=0
|
||||
gMCAddrListEnable=1
|
||||
# 0: disable feature (default)
|
||||
# 1: drop all broadcast frames, except ARP
|
||||
# 2: drop all multicast frames, except ICMPv6
|
||||
# 3: drop all broadcast and multicast frames, except ARP and ICMPv6
|
||||
gHwFilterMode=3
|
||||
gBpfFilterEnable=1
|
||||
gFwDebugLogLevel=3
|
||||
#gFwDebugModuleLoglevel=2,1,3,1,5,1,9,1,13,1,14,1,18,1,19,1,26,1,28,1,29,1,31,1,36,1,38,1,46,1,47,1,50,1,52,1,53,1,56,1,60,1,61,1
|
||||
gFwDebugModuleLoglevel=1,1,2,1,3,1,4,1,5,1,8,1,9,1,13,1,14,1,17,1,18,1,19,1,22,1,26,1,28,1,29,1,31,1,36,1,38,1,46,1,47,1,50,1,52,1,53,1,56,1,60,1,61,1
|
||||
gChannelBondingMode24GHz=1
|
||||
gStaKeepAlivePeriod=30
|
||||
gper_roam_enabled=3
|
||||
gper_roam_th_percent=80
|
||||
gper_min_rssi_threshold_for_roam=70
|
||||
gItoRepeatCount=5
|
||||
gDisablePacketFilter=0
|
||||
#ifndef VENDOR_EDIT
|
||||
#g_enable_packet_filter_bitmap=3
|
||||
#else
|
||||
# for layer2(mac) multicast, layer3(ip) multicast filter
|
||||
g_enable_packet_filter_bitmap=7
|
||||
#endif /* VENDOR_EDIT */
|
||||
gEnableModulatedDTIM=3
|
||||
gMaxLIModulatedDTIM=6
|
||||
#gActiveModeOffload=0
|
||||
gReportMaxLinkSpeed=2
|
||||
gEnableTDLSScan=1
|
||||
gEnableTxSUBeamformer=0
|
||||
gEnableSelfRecovery=1
|
||||
wlm_latency_flags_ultralow=0x180c83
|
||||
# endif /* VENDOR_EDIT */
|
||||
|
||||
# Enable IMPS or not
|
||||
gEnableImps=1
|
||||
|
||||
# Enable BMPS or not
|
||||
gEnableBmps=1
|
||||
|
||||
# ifdef VENDOR_EDIT
|
||||
# Enable Qpower or not on lahaina platform, 0 for disable
|
||||
gOptimizedPowerManagement=0
|
||||
# endif /* VENDOR_EDIT */
|
||||
|
||||
#Below ini copied from LA.UM.0.6.3
|
||||
fw_timeout_crash=1
|
||||
|
||||
# Phy Mode (auto, b, g, n, etc)
|
||||
# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
|
||||
# 1 = 11abg, 2 = 11b, 3 = 11g, 5 = 11g only, 6 = 11n only
|
||||
# 7 = 11b only 8 = 11ac only.
|
||||
gDot11Mode=0
|
||||
|
||||
# Assigned MAC Addresses - This will be used until NV items are in place
|
||||
# Each byte of MAC address is represented in Hex format as XX
|
||||
Intf0MacAddress=000AF58989FF
|
||||
Intf1MacAddress=000AF58989FE
|
||||
Intf2MacAddress=000AF58989FD
|
||||
Intf3MacAddress=000AF58989FC
|
||||
|
||||
# UAPSD service interval for VO,VI, BE, BK traffic
|
||||
InfraUapsdVoSrvIntv=0
|
||||
InfraUapsdViSrvIntv=0
|
||||
|
|
@ -77,15 +29,29 @@ InfraUapsdBkSrvIntv=0
|
|||
# Flag to allow STA send AddTspec even when ACM is Off
|
||||
gAddTSWhenACMIsOff=1
|
||||
|
||||
# Flags to filter Mcast and Bcast RX packets.
|
||||
# Value 0: No filtering, 1: Filter all Multicast.
|
||||
# 2: Filter all Broadcast. 3: Filter all Mcast abd Bcast
|
||||
McastBcastFilter=3
|
||||
|
||||
#Flag to enable HostARPOffload feature or not
|
||||
hostArpOffload=1
|
||||
|
||||
#Flag to enable HostNSOffload feature or not
|
||||
hostNSOffload=1
|
||||
|
||||
# 802.11n Protection flag
|
||||
gEnableApProt=1
|
||||
|
||||
#Enable OBSS protection
|
||||
gEnableApOBSSProt=1
|
||||
|
||||
#Enable/Disable UAPSD for SoftAP
|
||||
gEnableApUapsd=1
|
||||
|
||||
# Fixed Rate
|
||||
gFixedRate=0
|
||||
|
||||
# Maximum Tx power
|
||||
# gTxPowerCap=30
|
||||
|
||||
|
|
@ -98,23 +64,28 @@ RTSThreshold=1048576
|
|||
# Intra-BSS forward
|
||||
gDisableIntraBssFwd=0
|
||||
|
||||
# WMM Enable/Disable
|
||||
WmmIsEnabled=0
|
||||
|
||||
# 802.11d support
|
||||
#ifdef VENDOR_EDIT
|
||||
g11dSupportEnabled=1
|
||||
#else
|
||||
#g11dSupportEnabled=0
|
||||
#endif /* VENDOR_EDIT */
|
||||
g11dSupportEnabled=0
|
||||
|
||||
# 802.11h support
|
||||
g11hSupportEnabled=1
|
||||
|
||||
# DFS Master Capability
|
||||
#ifdef VENDOR_EDIT
|
||||
gEnableDFSMasterCap=0
|
||||
#else
|
||||
#gEnableDFSMasterCap=1
|
||||
#endif /* VENDOR_EDIT */
|
||||
gEnableDFSMasterCap=1
|
||||
|
||||
# ESE Support and fast transition
|
||||
EseEnabled=0
|
||||
|
||||
ImplicitQosIsEnabled=0
|
||||
|
||||
gNeighborScanTimerPeriod=200
|
||||
gNeighborLookupThreshold=76
|
||||
gNeighborScanChannelMinTime=20
|
||||
gNeighborScanChannelMaxTime=30
|
||||
gMaxNeighborReqTries=3
|
||||
|
||||
# Legacy (non-ESE, non-802.11r) Fast Roaming Support
|
||||
# To enable, set FastRoamEnabled=1
|
||||
|
|
@ -131,13 +102,26 @@ RoamRssiDiff=5
|
|||
# To disable, set gRoamIntraBand=0 (Roaming across band)
|
||||
gRoamIntraBand=0
|
||||
|
||||
#Short Guard Interval Enable/disable
|
||||
gShortGI20Mhz=1
|
||||
gShortGI40Mhz=1
|
||||
|
||||
#Auto Shutdown Value in seconds. A value of 0 means Auto shutoff is disabled
|
||||
gAPAutoShutOff=0
|
||||
|
||||
#Auto Shutdown wlan : Value in Seconds. 0 means disabled. Max 1 day = 86400 sec
|
||||
gWlanAutoShutdown = 0
|
||||
|
||||
# Not used.
|
||||
gApAutoChannelSelection=0
|
||||
|
||||
#Preferred band (both or 2.4 only or 5 only)
|
||||
BandCapability=0
|
||||
|
||||
#Channel Bonding
|
||||
gChannelBondingMode5GHz=1
|
||||
|
||||
#Say gGoLinkMonitorPeriod(10 seconds).
|
||||
#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds).
|
||||
#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link
|
||||
#is idle for last 10 seconds.) For both active and power save clients.
|
||||
|
||||
|
|
@ -155,11 +139,17 @@ gChannelBondingMode5GHz=1
|
|||
#gApLinkMonitorPeriod = 10
|
||||
#gGoLinkMonitorPeriod = 10
|
||||
|
||||
#gApKeepAlivePeriod is time to spend to check whether frame
|
||||
#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame
|
||||
#are succeed to send or not. Hence total effective detection time is
|
||||
# (gGoLinkMonitorPeriod + gGoKeepAlivePeriod) /
|
||||
# (gApLinkMonitorPeriod + gApKeepAlivePeriod)
|
||||
gGoKeepAlivePeriod = 20
|
||||
gApKeepAlivePeriod = 20
|
||||
|
||||
#If set will start with active scan after driver load, otherwise will start with
|
||||
#passive scan to find out the domain
|
||||
gEnableBypass11d=1
|
||||
|
||||
#If set to 0, will not scan DFS channels
|
||||
gEnableDFSChnlScan=1
|
||||
|
||||
|
|
@ -167,10 +157,7 @@ gEnableDFSChnlScan=1
|
|||
# 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE
|
||||
gAllowDFSChannelRoam=1
|
||||
|
||||
#ifdef VENDOR_EDIT
|
||||
# Enable ETSI13 hotspot on SRD channel
|
||||
etsi13_srd_chan_in_master_mode=1
|
||||
#endif VENDOR_EDIT
|
||||
gVhtChannelWidth=2
|
||||
|
||||
#Data Inactivity Timeout when in powersave (in ms)
|
||||
gDataInactivityTimeout=200
|
||||
|
|
@ -184,13 +171,14 @@ gSetTxChainmask1x1=1
|
|||
gSetRxChainmask1x1=1
|
||||
|
||||
# Scan Timing Parameters
|
||||
gPassiveMaxChannelTime=110
|
||||
#ifdef VENDOR_EDIT
|
||||
gActiveMaxChannelTime=60
|
||||
gActiveMinChannelTime=40
|
||||
#else
|
||||
#gActiveMaxChannelTime=40
|
||||
#endif /* VENDOR_EDIT */
|
||||
# gPassiveMaxChannelTime=110
|
||||
# gPassiveMinChannelTime=60
|
||||
gActiveMaxChannelTime=40
|
||||
gActiveMinChannelTime=20
|
||||
|
||||
#If set to 0, MCC is not allowed.
|
||||
gEnableMCCMode=1
|
||||
|
||||
# MCC to SCC Switch mode:
|
||||
# 0-Disable
|
||||
# 1-Enable
|
||||
|
|
@ -200,9 +188,18 @@ gActiveMinChannelTime=40
|
|||
# without SAP restart by sending (E)CSA
|
||||
gWlanMccToSccSwitchMode = 3
|
||||
|
||||
# 1=enable STBC; 0=disable STBC
|
||||
gEnableRXSTBC=1
|
||||
|
||||
# 1=enable tx STBC; 0=disable
|
||||
gEnableTXSTBC=1
|
||||
|
||||
# 1=enable rx LDPC; 0=disable
|
||||
gEnableRXLDPC=1
|
||||
|
||||
#Enable/Disable Tx beamforming
|
||||
gTxBFEnable=1
|
||||
|
||||
#Enable/Disable Tx beamformee in SAP mode
|
||||
gEnableTxBFeeSAP=1
|
||||
|
||||
|
|
@ -211,18 +208,19 @@ gEnableTxBFeeSAP=1
|
|||
# 0=disable, 1=enable
|
||||
gEnableTxBFin20MHz=1
|
||||
|
||||
#Enable/Disable SU Tx beamformer support
|
||||
#gEnableTxSUBeamformer=1
|
||||
#Enable/Disable SU Tx beamformer support.
|
||||
gEnableTxSUBeamformer=1
|
||||
|
||||
gEnableFastRoamInConcurrency=1
|
||||
|
||||
#Maxium Channel time in msec
|
||||
gMaxMediumTime = 6000
|
||||
|
||||
# 802.11K support
|
||||
gRrmEnable=1
|
||||
|
||||
#ifdef VENDOR_EDIT
|
||||
#Enable Power Save offload
|
||||
gEnablePowerSaveOffload=1
|
||||
#else
|
||||
#gEnablePowerSaveOffload=2
|
||||
#endif VENDOR_EDIT
|
||||
gEnablePowerSaveOffload=2
|
||||
|
||||
#Enable firmware uart print
|
||||
gEnablefwprint=0
|
||||
|
|
@ -232,9 +230,6 @@ gEnablefwprint=0
|
|||
# 0=Disable, 1=WMI, 2=DIAG
|
||||
gEnablefwlog=1
|
||||
|
||||
# Enable broadcast logging to the userspace entities
|
||||
gMulticastHostFwMsgs=1
|
||||
|
||||
# Maximum Receive AMPDU size (VHT only. Valid values:
|
||||
# 0->8k 1->16k 2->32k 3->64k 4->128k)
|
||||
gVhtAmpduLenExponent=7
|
||||
|
|
@ -243,6 +238,9 @@ gVhtAmpduLenExponent=7
|
|||
# 0->3895 octets, 1->7991 octets, 2->11454 octets)
|
||||
gVhtMpduLen=2
|
||||
|
||||
# Maximum number of wow filters required
|
||||
#gMaxWoWFilters=22
|
||||
|
||||
# WOW Enable/Disable.
|
||||
# 0 - Disable both magic pattern match and pattern byte match.
|
||||
# 1 - Enable magic pattern match on all interfaces.
|
||||
|
|
@ -251,9 +249,16 @@ gVhtMpduLen=2
|
|||
# Default value of gEnableWoW is 3.
|
||||
# gEnableWoW=0
|
||||
|
||||
# Enable or Disable MCC Adaptive Scheduler at the FW
|
||||
# 1=Enable (default), 0=Disable
|
||||
gEnableMCCAdaptiveScheduler=1
|
||||
|
||||
#Enable or Disable p2p device address administered
|
||||
isP2pDeviceAddrAdministrated=0
|
||||
|
||||
# Remove Overlap channel restriction
|
||||
gEnableOverLapCh=0
|
||||
|
||||
#Enable VHT on 2.4Ghz
|
||||
gEnableVhtFor24GHzBand=1
|
||||
|
||||
|
|
@ -267,12 +272,30 @@ gEnableVhtFor24GHzBand=1
|
|||
# SSDP 239.255.255.250 and LLMNR 224.0.0.252
|
||||
ssdp=0
|
||||
|
||||
#Enable Memory Deep Sleep
|
||||
gEnableMemDeepSleep=1
|
||||
|
||||
# Regulatory Setting; 0=STRICT; 1=CUSTOM
|
||||
gRegulatoryChangeCountry=1
|
||||
|
||||
# RA filtering rate limit param, the current value would not
|
||||
# help if the lifetime in RA is less than 3*60=3min. Then
|
||||
# we need to change it, though it is uncommon.
|
||||
# gRAFilterEnable=0
|
||||
gRArateLimitInterval=600
|
||||
|
||||
# Maximum number of concurrent connections
|
||||
gMaxConcurrentActiveSessions=3
|
||||
|
||||
# Disable/Enable GreenAP
|
||||
# 0 to disable, 1 to enable, default: 1
|
||||
gEnableGreenAp=0
|
||||
|
||||
# Radar PRI multiplier
|
||||
gDFSradarMappingPriMultiplier=4
|
||||
|
||||
gPNOScanSupport=1
|
||||
|
||||
#Enable/Disable LPASS support
|
||||
# 0 to disable, 1 to enable
|
||||
gEnableLpassSupport=1
|
||||
|
|
@ -280,33 +303,20 @@ gEnableLpassSupport=1
|
|||
# Whether userspace country code setting shld have priority
|
||||
gCountryCodePriority=1
|
||||
|
||||
|
||||
# Enable(1)/Disable(0) SIFS burst
|
||||
#ifdef VENDOR_EDIT
|
||||
#Min: 0 disabled
|
||||
#Max: 3 enabled802.11g
|
||||
#Default: 1 enabled, but disabled for legacy mode
|
||||
gEnableSifsBurst=3
|
||||
#else
|
||||
# gEnableSifsBurst=1
|
||||
# endif /* VENDOR_EDIT */
|
||||
gEnableSifsBurst=1
|
||||
|
||||
# Enable or Disable Multi-user MIMO
|
||||
# 1=Enable (default), 0=Disable
|
||||
gEnableMuBformee=1
|
||||
|
||||
# Enable support for TDLS
|
||||
# Enable/Disable channel avoidance for SAP in SCC scenario
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
gEnableTDLSSupport=1
|
||||
gSapSccChanAvoidance=0
|
||||
|
||||
# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall
|
||||
# initiate TDLS Discovery towards a peer whenever setup criteria (throughput
|
||||
# and RSSI) is met and then will initiate teardown when teardown criteria
|
||||
# (idle packet count and RSSI) is met.
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
gEnableTDLSImplicitTrigger=1
|
||||
# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode
|
||||
gIbssTxSpEndInactivityTime=10
|
||||
|
||||
# Enable TDLS External Control. That is, user space application has to
|
||||
# first configure a peer MAC in wlan driver towards which TDLS is desired.
|
||||
|
|
@ -327,6 +337,10 @@ gTDLSExternalControl=1
|
|||
# TDLS connection.
|
||||
gEnableTDLSOffChannel=1
|
||||
|
||||
# Enable or Disable Random MAC (Spoofing)
|
||||
# 1=Enable (default), 0=Disable
|
||||
gEnableMacAddrSpoof=1
|
||||
|
||||
################ Datapath feature set Begin ################
|
||||
# Bus bandwidth threshold values in terms of number of packets
|
||||
gBusBandwidthHighThreshold=2000
|
||||
|
|
@ -361,9 +375,6 @@ gVhtTxMCS2x2=2
|
|||
gIPAConfig=0x7d
|
||||
gIPADescSize=800
|
||||
|
||||
# Increase TCL ringsize
|
||||
dp_tx_ring_size=3072
|
||||
|
||||
# Enable/Disable RX full reorder offload
|
||||
gReorderOffloadSupported=1
|
||||
|
||||
|
|
@ -373,9 +384,7 @@ gCEClassifyEnable=1
|
|||
|
||||
# Enable Rx handling options
|
||||
# Rx_thread=1 RPS=2(default for ROME) NAPI=4(default for ihelium)
|
||||
# DP_RX_THREAD=16 (1 << 4)
|
||||
# 20 = (DP_RX_THREAD | NAPI)
|
||||
rx_mode=20
|
||||
rx_mode=5
|
||||
|
||||
# Enable(Tx) fastpath for data traffic.
|
||||
# 1 - enable(default) 0 - disable
|
||||
|
|
@ -389,13 +398,9 @@ gEnableIpTcpUdpChecksumOffload=1
|
|||
# 1 - enable 0 - disable
|
||||
TSOEnable=1
|
||||
|
||||
#ifndef VENDOR_EDIT
|
||||
# Enable Generic Receive Offload
|
||||
# 1 - enable(default) 0 - disable
|
||||
#GROEnable=0
|
||||
#else
|
||||
GROEnable=1
|
||||
#end if /* VENDOR_EDIT */
|
||||
|
||||
# Enable HT MPDU Density
|
||||
# 4 for 2 micro sec
|
||||
|
|
@ -418,26 +423,26 @@ maxMSDUsPerRxInd=8
|
|||
|
||||
# Enable NUD tracking feature
|
||||
# 1 - enable 0 - disable(default)
|
||||
#ifndef VENDOR_EDIT
|
||||
# richy.li@Connectivity, 2019/10/11, [Q porting] align the vowifi behavior with 18811.
|
||||
#gEnableNUDTracking=1
|
||||
#else
|
||||
gEnableNUDTracking=0
|
||||
#endif /* VENDOR_EDIT */
|
||||
gEnableNUDTracking=1
|
||||
|
||||
# Enable PEER UNMAP CONF SUPPORT
|
||||
# 1 - enable 0 - disable(default)
|
||||
gEnablePeerUnmapConfSupport=1
|
||||
|
||||
dp_rx_fisa_enable=1
|
||||
dp_rx_flow_search_table_size=128
|
||||
rpsRxQueueCpuMapList=f3
|
||||
legacy_mode_csum_disable=1
|
||||
send_icmp_req_to_fw=200
|
||||
################ Datapath f
|
||||
################ Datapath feature set End ################
|
||||
|
||||
#ifdef VENDOR_EDIT
|
||||
adaptive_dwell_mode_enabled=0
|
||||
#else
|
||||
#adaptive_dwell_mode_enabled=1
|
||||
#endif /* VENDOR_EDIT */
|
||||
################ NAN feature set start ###################
|
||||
|
||||
# Enable NAN discovery (NAN 1.0)
|
||||
# 1 - enable 0 - disable(default)
|
||||
gEnableNanSupport=1
|
||||
# Enable NAN Datapath
|
||||
genable_nan_datapath=1
|
||||
|
||||
################ NAN feature set end #####################
|
||||
|
||||
adaptive_dwell_mode_enabled=1
|
||||
|
||||
hostscan_adaptive_dwell_mode=1
|
||||
|
||||
|
|
@ -445,55 +450,19 @@ adapt_dwell_lpf_weight=80
|
|||
|
||||
adapt_dwell_wifi_act_threshold=10
|
||||
|
||||
MAWCEnabled=0
|
||||
|
||||
# Enable/Disable rtt sta mac randomization
|
||||
enable_rtt_mac_randomization=1
|
||||
|
||||
#Enable/Disable SNR monitoring
|
||||
gEnableSNRMonitoring=1
|
||||
|
||||
# HTC Credit count for WMI operation
|
||||
# 1 to serialize the WMI commands
|
||||
# 0 default works with FW advertised credits, 2 credits usually
|
||||
gWmiCreditCount=1
|
||||
# Rx thread affinity mask in UL case
|
||||
RX_THREAD_UL_CPU_AFFINITY_MASK=0xc0
|
||||
|
||||
# Enable enhanced ACS
|
||||
acs_with_more_param=1
|
||||
# bits 0-3: rssi weight
|
||||
# bits 4-7: bss count weight
|
||||
# bits 8-11: noise floor weight
|
||||
# bits 12-15: channel free weight
|
||||
# bits 16-19: tx power range weight
|
||||
# bits 20-23: tx power throughput weight
|
||||
# bits 24-31: reserved
|
||||
AutoChannelSelectWeight=0x00fafafa
|
||||
|
||||
# Enable/Disable broadcast TWT
|
||||
bcast_twt=1
|
||||
|
||||
# Enable Dynamic Runtime PM
|
||||
gRuntimePM=2
|
||||
gRuntimePMDelay=500
|
||||
|
||||
# Disable packetlog explicitly
|
||||
#ifndef VENDOR_EDIT
|
||||
#gEnablePacketLog=0
|
||||
#else
|
||||
global_adapt_dwelltime_mode=1
|
||||
roamscan_adaptive_dwell_mode=1
|
||||
extscan_adaptive_dwell_mode=1
|
||||
pnoscan_adaptive_dwell_mode=1
|
||||
active_max_channel_time_2g=60
|
||||
#endif /* VENDOR_EDIT */
|
||||
|
||||
gfine_time_meas_cap=0x0030D
|
||||
#enale 6Ghz support
|
||||
oem_6g_support_disable=1
|
||||
|
||||
cfr_disable=7
|
||||
active_max_channel_time_6g=60
|
||||
passive_max_channel_time_6g=60
|
||||
# prefer to establish 5GHz band GO for p2p connection
|
||||
g_prefer_5g_scc_to_dbs=0xc
|
||||
# Packet Log buffer size
|
||||
PktlogBufSize=1
|
||||
|
||||
read_mac_addr_from_mac_file=1
|
||||
|
||||
|
|
|
|||
|
|
@ -2,4 +2,3 @@ disable_scan_offload=1
|
|||
p2p_no_group_iface=1
|
||||
persistent_reconnect=1
|
||||
bss_max_count=400
|
||||
p2p_ignore_shared_freq=1
|
||||
|
|
|
|||
|
|
@ -4,4 +4,5 @@ tdls_external_control=1
|
|||
wowlan_triggers=magic_pkt
|
||||
bss_max_count=400
|
||||
interworking=1
|
||||
driver_param=use_p2p_group_interface=1
|
||||
config_methods=virtual_display virtual_push_button keypad
|
||||
driver_param="no_rrm=1 use_p2p_group_interface=1"
|
||||
|
|
|
|||
Loading…
Reference in a new issue