From 5eb5e3ffd8d7aa1e809cebddb397b40bf3e5a9c5 Mon Sep 17 00:00:00 2001
From: LuK1337 <priv.luk@gmail.com>
Date: Mon, 4 Jan 2021 22:25:23 +0100
Subject: [PATCH] sm8250-common: Import WiFi configs

Change-Id: I9fdc4472ba2b4be1025e65f6574dca96282de40a
---
 common.mk                                  |   8 +
 wifi/WCNSS_qcom_cfg_roam.ini               | 447 ++++++++++++++++
 wifi/WCNSS_qcom_cfg_setchain.ini           | 554 ++++++++++++++++++++
 wifi/p2p_supplicant_overlay.conf           |   5 +
 wifi/qca6390/WCNSS_qcom_cfg.ini            | 566 +++++++++++++++++++++
 wifi/qca6390/WCNSS_qcom_cfg_cta_kona_8.ini | 565 ++++++++++++++++++++
 wifi/wpa_supplicant_overlay.conf           |   6 +
 7 files changed, 2151 insertions(+)
 create mode 100644 wifi/WCNSS_qcom_cfg_roam.ini
 create mode 100644 wifi/WCNSS_qcom_cfg_setchain.ini
 create mode 100644 wifi/p2p_supplicant_overlay.conf
 create mode 100644 wifi/qca6390/WCNSS_qcom_cfg.ini
 create mode 100644 wifi/qca6390/WCNSS_qcom_cfg_cta_kona_8.ini
 create mode 100644 wifi/wpa_supplicant_overlay.conf

diff --git a/common.mk b/common.mk
index 2751c2c..458c1ce 100644
--- a/common.mk
+++ b/common.mk
@@ -311,6 +311,14 @@ PRODUCT_PACKAGES += \
 PRODUCT_PACKAGES += \
     WifiResCommon
 
+PRODUCT_COPY_FILES += \
+    $(LOCAL_PATH)/wifi/qca6390/WCNSS_qcom_cfg.ini:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/qca6390/WCNSS_qcom_cfg.ini \
+    $(LOCAL_PATH)/wifi/qca6390/WCNSS_qcom_cfg_cta_kona_8.ini:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/qca6390/WCNSS_qcom_cfg_cta_kona_8.ini \
+    $(LOCAL_PATH)/wifi/WCNSS_qcom_cfg_roam.ini:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/WCNSS_qcom_cfg_roam.ini \
+    $(LOCAL_PATH)/wifi/WCNSS_qcom_cfg_setchain.ini:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/WCNSS_qcom_cfg_setchain.ini \
+    $(LOCAL_PATH)/wifi/p2p_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/p2p_supplicant_overlay.conf \
+    $(LOCAL_PATH)/wifi/wpa_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/wpa_supplicant_overlay.conf
+
 # WiFi Display
 PRODUCT_PACKAGES += \
     libnl
diff --git a/wifi/WCNSS_qcom_cfg_roam.ini b/wifi/WCNSS_qcom_cfg_roam.ini
new file mode 100644
index 0000000..eaf94ff
--- /dev/null
+++ b/wifi/WCNSS_qcom_cfg_roam.ini
@@ -0,0 +1,447 @@
+# This file allows user to override the factory
+# for close wifi roam
+gEnableImps = 0
+gEnableBmps = 0
+gRoamOffloadEnabled=0
+gRoamScanOffloadEnabled=0
+#Below ini copied from LA.UM.0.6.3
+fw_timeout_crash=1
+
+# Phy Mode (auto, b, g, n, etc)
+# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
+# 1 = 11abg, 2 = 11b, 3 = 11g, 5 = 11g only, 6 = 11n only
+# 7 = 11b only 8 = 11ac only.
+gDot11Mode=0
+
+# UAPSD service interval for VO,VI, BE, BK traffic
+InfraUapsdVoSrvIntv=0
+InfraUapsdViSrvIntv=0
+InfraUapsdBeSrvIntv=0
+InfraUapsdBkSrvIntv=0
+
+# Flag to allow STA send AddTspec even when ACM is Off
+gAddTSWhenACMIsOff=1
+
+# 802.11n Protection flag
+gEnableApProt=1
+
+#Enable OBSS protection
+gEnableApOBSSProt=1
+
+#Enable/Disable UAPSD for SoftAP
+gEnableApUapsd=1
+
+# Maximum Tx power
+# gTxPowerCap=30
+
+# Fragmentation Threshold
+# gFragmentationThreshold=2346
+
+# RTS threshold
+RTSThreshold=1048576
+
+# Intra-BSS forward
+gDisableIntraBssFwd=0
+
+# WMM Enable/Disable
+WmmIsEnabled=0
+
+# 802.11d support
+g11dSupportEnabled=0
+
+# 802.11h support
+g11hSupportEnabled=1
+
+# DFS Master Capability
+gEnableDFSMasterCap=1
+
+# ESE Support and fast transition
+EseEnabled=0
+
+ImplicitQosIsEnabled=0
+
+gNeighborScanTimerPeriod=200
+gNeighborLookupThreshold=76
+gNeighborScanChannelMinTime=20
+
+# Legacy (non-ESE, non-802.11r) Fast Roaming Support
+# To enable, set FastRoamEnabled=1
+# To disable, set FastRoamEnabled=0
+FastRoamEnabled=1
+
+# Check if the AP to which we are roaming is better than current AP in
+# terms of RSSI.  Checking is disabled if set to Zero.Otherwise it will
+# use this value as to how better the RSSI of the new/roamable AP should
+# be for roaming
+RoamRssiDiff=5
+
+# To enable, set gRoamIntraBand=1 (Roaming within band)
+# To disable, set gRoamIntraBand=0 (Roaming across band)
+gRoamIntraBand=0
+
+#Short Guard Interval Enable/disable
+gShortGI20Mhz=1
+gShortGI40Mhz=1
+
+#Preferred band (both or 2.4 only or 5 only)
+BandCapability=0
+
+#Channel Bonding
+gChannelBondingMode5GHz=1
+
+#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds).
+#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link
+#is idle for last 10 seconds.) For both active and power save clients.
+
+#Power save clients: DUT set TIM bit from 10th second onwards and till client
+#honors TIM bit. If doesn't honor for 5 seconds then DUT remove client.
+
+#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not
+#success still we try on 11th second if not tries on 12th and so on till 15th
+#second. Hence before disconnection DUT will send 5 NULL frames. Hence in any
+#case DUT will detect client got removed in (10+5) seconds.
+#i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod)..
+
+#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and
+#it is period where we send NULL frame.
+#gApLinkMonitorPeriod = 10
+#gGoLinkMonitorPeriod = 10
+
+#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame
+#are succeed to send or not. Hence total effective detection time is
+# (gGoLinkMonitorPeriod + gGoKeepAlivePeriod) /
+# (gApLinkMonitorPeriod + gApKeepAlivePeriod)
+gGoKeepAlivePeriod = 20
+
+#If set to 0, will not scan DFS channels
+gEnableDFSChnlScan=1
+
+# Enable DFS channel roam
+# 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE
+gAllowDFSChannelRoam=1
+
+gVhtChannelWidth=2
+
+# Set txchainmask and rxchainmask
+# These parameters are used only if gEnable2x2 is 0
+# Valid values are 1,2
+# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0.
+# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1.
+gSetTxChainmask1x1=1
+gSetRxChainmask1x1=1
+
+# Scan Timing Parameters
+# gPassiveMaxChannelTime=110
+gActiveMaxChannelTime=40
+
+#If set to 0, MCC is not allowed.
+gEnableMCCMode=1
+
+# MCC to SCC Switch mode:
+# 0-Disable
+# 1-Enable
+# 2-Force SCC if same band, with SAP restart
+# 3-Force SCC if same band, without SAP restart by sending (E)CSA
+# 4-Force SCC if same band (or) use SAP mandatory channel for DBS,
+#   without SAP restart by sending (E)CSA
+gWlanMccToSccSwitchMode = 3
+
+# 1=enable STBC; 0=disable STBC
+gEnableRXSTBC=1
+
+# 1=enable tx STBC; 0=disable
+gEnableTXSTBC=1
+
+# 1=enable rx LDPC; 0=disable
+gEnableRXLDPC=1
+
+#Enable/Disable Tx beamforming
+gTxBFEnable=1
+
+#Enable/Disable Tx beamformee in SAP mode
+gEnableTxBFeeSAP=1
+
+# Enable Tx beamforming in VHT20MHz
+# Valid values are 0,1. If commented out, the default value is 0.
+# 0=disable, 1=enable
+gEnableTxBFin20MHz=1
+
+#Enable/Disable SU Tx beamformer support
+gEnableTxSUBeamformer=0
+
+gEnableFastRoamInConcurrency=1
+
+# 802.11K support
+gRrmEnable=1
+
+# Firmware log mode
+# Valid values are 0,1,2
+# 0=Disable, 1=WMI, 2=DIAG
+gEnablefwlog=1
+
+# Maximum Receive AMPDU size (VHT only. Valid values:
+# 0->8k 1->16k 2->32k 3->64k 4->128k)
+gVhtAmpduLenExponent=7
+
+# Maximum MPDU length (VHT only. Valid values:
+# 0->3895 octets, 1->7991 octets, 2->11454 octets)
+gVhtMpduLen=2
+
+# WOW Enable/Disable.
+# 0 - Disable both magic pattern match and pattern byte match.
+# 1 - Enable magic pattern match on all interfaces.
+# 2 - Enable pattern byte match on all interfaces.
+# 3 - Enable both magic pattern and pattern byte match on all interfaces.
+# Default value of gEnableWoW is 3.
+# gEnableWoW=0
+
+# Enable or Disable MCC Adaptive Scheduler at the FW
+# 1=Enable (default), 0=Disable
+gEnableMCCAdaptiveScheduler=1
+
+#Enable or Disable p2p device address administered
+isP2pDeviceAddrAdministrated=0
+
+# Set Thermal Power limit
+TxPower2g=10
+TxPower5g=10
+
+# Remove Overlap channel restriction
+gEnableOverLapCh=0
+
+#Enable VHT on 2.4Ghz
+gEnableVhtFor24GHzBand=1
+
+#Maximum number of offload peers supported
+# gMaxOffloadPeers=2
+
+# controlling the following offload patterns
+# through ini parameter. Default value is 1
+# to disable set it to zero. ssdp = 0
+# Setup multicast pattern for mDNS 224.0.0.251,
+# SSDP 239.255.255.250 and LLMNR 224.0.0.252
+ssdp=0
+
+#Enable Memory Deep Sleep
+gEnableMemDeepSleep=1
+
+# RA filtering rate limit param, the current value would not
+# help if the lifetime in RA is less than 3*60=3min. Then
+# we need to change it, though it is uncommon.
+# gRAFilterEnable=0
+gRArateLimitInterval=600
+
+# Maximum number of concurrent connections
+gMaxConcurrentActiveSessions=3
+
+# Disable/Enable GreenAP
+# 0 to disable, 1 to enable, default: 1
+gEnableGreenAp=0
+
+gPNOScanSupport=1
+
+#Enable/Disable LPASS support
+# 0 to disable, 1 to enable
+gEnableLpassSupport=1
+
+# Whether userspace country code setting shld have priority
+gCountryCodePriority=1
+
+# Enable(1)/Disable(0) SIFS burst
+gEnableSifsBurst=1
+
+# Enable or Disable Multi-user MIMO
+# 1=Enable (default), 0=Disable
+gEnableMuBformee=1
+
+# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode
+gIbssTxSpEndInactivityTime=10
+
+# Enable support for TDLS
+#  0 - disable
+#  1 - enable
+gEnableTDLSSupport=1
+
+# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall
+# initiate TDLS Discovery towards a peer whenever setup criteria (throughput
+# and RSSI) is met and then will initiate teardown when teardown criteria
+# (idle packet count and RSSI) is met.
+#  0 - disable
+#  1 - enable
+gEnableTDLSImplicitTrigger=1
+
+# Enable TDLS External Control. That is, user space application has to
+# first configure a peer MAC in wlan driver towards which TDLS is desired.
+# Device will establish TDLS only towards those configured peers whenever
+# TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS
+# when teardown criteria (idle packet count and RSSI) is met. However,
+# device will accept TDLS connection if it is initiated from any other peer,
+# even if that peer is not configured.
+#  0 - disable
+#  1 - enable
+# For TDLS External Control, Implicit Trigger must also be enabled.
+gTDLSExternalControl=1
+
+# Enable support for TDLS off-channel operation
+#  0 - disable
+#  1 - enable
+# TDLS off-channel operation will be invoked when there is only one
+# TDLS connection.
+gEnableTDLSOffChannel=1
+
+# Enable or Disable Random MAC (Spoofing)
+# 1=Enable (default), 0=Disable
+gEnableMacAddrSpoof=1
+
+################ Datapath feature set Begin ################
+# Bus bandwidth threshold values in terms of number of packets
+gBusBandwidthHighThreshold=2000
+gBusBandwidthMediumThreshold=500
+gBusBandwidthLowThreshold=150
+
+# Bus bandwidth compute timeout value in ms
+gBusBandwidthComputeInterval=100
+
+# VHT Tx/Rx MCS values
+# Valid values are 0,1,2. If commented out, the default value is 0.
+# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
+gVhtRxMCS=2
+gVhtTxMCS=2
+
+# VHT Tx/Rx MCS values for 2x2
+# Valid values are 0,1,2. If commented out, the default value is 0.
+# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
+gEnable2x2=1
+gVhtRxMCS2x2=2
+gVhtTxMCS2x2=2
+
+#IPA config is a bit mask and following are the configurations.
+#bit0 IPA Enable
+#bit1 IPA PRE Filter enable
+#bit2 IPv6 enable
+#bit3 IPA Resource Manager (RM) enable
+#bit4 IPA Clock scaling enable
+#bit5 IPA uC ENABLE
+#bit6 IPA uC STA ENABLE
+#bit8 IPA Real Time Debugging
+gIPAConfig=0x7d
+gIPADescSize=800
+
+# Enable/Disable RX full reorder offload
+gReorderOffloadSupported=1
+
+# Enable CE classification
+# 1 - enable(default)  0 - disable
+gCEClassifyEnable=1
+
+# Enable Rx handling options
+# Rx_thread=1 RPS=2(default for ROME) NAPI=4(default for ihelium)
+# DP_RX_THREAD=16 (1 << 4)
+# 20 = (DP_RX_THREAD | NAPI)
+rx_mode=20
+
+# Enable(Tx) fastpath for data traffic.
+# 1 - enable(default)  0 - disable
+gEnableFastPath=1
+
+# This flag enables IP, TCP and UDP checksum offload
+# 1 - enable(default)  0 - disable
+gEnableIpTcpUdpChecksumOffload=1
+
+# Enable TCP Segmentation Offload
+# 1 - enable  0 - disable
+TSOEnable=1
+
+# Enable Generic Receive Offload
+# 1 - enable(default)  0 - disable
+GROEnable=1
+
+# Enable HT MPDU Density
+# 4 for 2 micro sec
+ght_mpdu_density=4
+
+# Enable flow steering to enable multiple CEs for Rx flows.
+# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs.
+# Parallel Rx paths.
+# 1 - enable 0 - disable(default)
+gEnableFlowSteering=1
+
+# Time in microseconds after which a NAPI poll must yield
+ce_service_max_yield_time=500
+
+#Maximum number of HTT messages to be processed per NAPI poll
+ce_service_max_rx_ind_flush=1
+
+# Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND
+maxMSDUsPerRxInd=8
+
+# Enable NUD tracking feature
+# 1 - enable 0 - disable(default)
+gEnableNUDTracking=1
+################ Datapath feature set End ################
+
+################ NAN feature set start ###################
+
+# Enable NAN discovery (NAN 1.0)
+# 1 - enable  0 - disable(default)
+gEnableNanSupport=1
+# Enable NAN Datapath
+genable_nan_datapath=1
+
+################ NAN feature set end #####################
+
+adaptive_dwell_mode_enabled=1
+
+hostscan_adaptive_dwell_mode=1
+
+adapt_dwell_lpf_weight=80
+
+adapt_dwell_wifi_act_threshold=10
+
+MAWCEnabled=0
+
+drop_bcn_on_chan_mismatch=0
+
+# Enable/Disable rtt sta mac randomization
+enable_rtt_mac_randomization=1
+
+#Enable/Disable SNR monitoring
+gEnableSNRMonitoring=1
+
+# HTC Credit count for WMI operation
+# 1 to serialize the WMI commands
+# 0 default works with FW advertised credits, 2 credits usually
+gWmiCreditCount=1
+
+# Enable enhanced ACS
+acs_with_more_param=1
+# bits 0-3:   rssi weight
+# bits 4-7:   bss count weight
+# bits 8-11:  noise floor weight
+# bits 12-15: channel free weight
+# bits 16-19: tx power range weight
+# bits 20-23: tx power throughput weight
+# bits 24-31: reserved
+AutoChannelSelectWeight=0x00fafafa
+
+# Enable/Disable broadcast TWT
+bcast_twt=1
+
+# Enable Runtime PM
+#gRuntimePM=1
+
+# Enable broadcast logging to the userspace entities
+gMulticastHostFwMsgs=1
+# Disable packetlog explicitly
+gEnablePacketLog=0
+
+# Set IPA bandwidth levels in mbps
+gIPALowBandwidthMbps=100
+gIPAMediumBandwidthMbps=400
+gIPAHighBandwidthMbps=800
+spectral_disable=1
+
+END
+
+# Note: Configuration parser would not read anything past the END marker
+
diff --git a/wifi/WCNSS_qcom_cfg_setchain.ini b/wifi/WCNSS_qcom_cfg_setchain.ini
new file mode 100644
index 0000000..46fcd8e
--- /dev/null
+++ b/wifi/WCNSS_qcom_cfg_setchain.ini
@@ -0,0 +1,554 @@
+# This file allows user to override the factory
+# for the WLAN chain0/chain1 only
+
+#Below ini copied from LA.UM.0.6.3
+# ifdef VENDOR_EDIT
+tx_nss_5g=0x01249249
+rx_nss_5g=0x01249249
+tx_nss_2g=0x01249249
+rx_nss_2g=0x01249249
+gInitialScanNoDFSChnl=1
+gRoamOffloadEnabled=0
+gRoamScanOffloadEnabled=0
+#gInitialDwellTime=20
+gSoftApMaxPeers=8
+gRoamBmissFirstBcnt=15
+gRoamBmissFinalBcnt=25
+gDroppedPktDisconnectTh=1024
+# Runtime is default zero in hostdriver
+#gRuntimePM=0
+gRAFilterEnable=0
+gMCAddrListEnable=1
+# 0: disable feature (default)
+# 1: drop all broadcast frames, except ARP
+# 2: drop all multicast frames, except ICMPv6
+# 3: drop all broadcast and multicast frames, except ARP and ICMPv6
+gHwFilterMode=3
+gBpfFilterEnable=1
+#gFwDebugLogLevel=3
+#gFwDebugModuleLoglevel=2,1,3,1,5,1,9,1,13,1,14,1,18,1,19,1,26,1,28,1,29,1,31,1,36,1,38,1,46,1,47,1,50,1,52,1,53,1,56,1,60,1,61,1
+gChannelBondingMode24GHz=1
+gStaKeepAlivePeriod=30
+gper_roam_enabled=3
+gper_roam_th_percent=80
+gper_min_rssi_threshold_for_roam=70
+gItoRepeatCount=5
+gDisablePacketFilter=0
+g_enable_packet_filter_bitmap=3
+gEnableModulatedDTIM=3
+gMaxLIModulatedDTIM=6
+#gActiveModeOffload=0
+gReportMaxLinkSpeed=2
+gEnableSelfRecovery=0
+gEnableTxSUBeamformer=0
+# endif /* VENDOR_EDIT */
+fw_timeout_crash=1
+
+# Phy Mode (auto, b, g, n, etc)
+# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
+# 1 = 11abg, 2 = 11b, 3 = 11g, 5 = 11g only, 6 = 11n only
+# 7 = 11b only 8 = 11ac only.
+gDot11Mode=0
+
+# UAPSD service interval for VO,VI, BE, BK traffic
+InfraUapsdVoSrvIntv=0
+InfraUapsdViSrvIntv=0
+InfraUapsdBeSrvIntv=0
+InfraUapsdBkSrvIntv=0
+
+# Flag to allow STA send AddTspec even when ACM is Off
+gAddTSWhenACMIsOff=1
+
+# ifdef VENDOR_EDIT
+# Enable IMPS or not
+gEnableImps=0
+
+# Enable BMPS or not
+gEnableBmps=0
+
+#Flag to enable HostARPOffload feature or not
+hostArpOffload=1
+
+#Flag to enable HostNSOffload feature or not
+hostNSOffload=1
+# endif /* VENDOR_EDIT */
+
+# 802.11n Protection flag
+gEnableApProt=1
+
+#Enable OBSS protection
+gEnableApOBSSProt=1
+
+#Enable/Disable UAPSD for SoftAP
+gEnableApUapsd=1
+
+# Maximum Tx power
+# gTxPowerCap=30
+
+# Fragmentation Threshold
+# gFragmentationThreshold=2346
+
+# RTS threshold
+RTSThreshold=1048576
+
+# Intra-BSS forward
+gDisableIntraBssFwd=0
+
+# WMM Enable/Disable
+WmmIsEnabled=0
+
+# 802.11d support
+#ifdef VENDOR_EDIT
+g11dSupportEnabled=1
+#else
+#g11dSupportEnabled=0
+#endif /* VENDOR_EDIT */
+
+# 802.11h support
+g11hSupportEnabled=1
+
+# DFS Master Capability
+#ifdef VENDOR_EDIT
+gEnableDFSMasterCap=0
+#else
+#gEnableDFSMasterCap=1
+#endif /* VENDOR_EDIT */
+
+# ESE Support and fast transition
+EseEnabled=0
+
+ImplicitQosIsEnabled=0
+
+gNeighborScanTimerPeriod=200
+gNeighborLookupThreshold=76
+gNeighborScanChannelMinTime=20
+
+# Legacy (non-ESE, non-802.11r) Fast Roaming Support
+# To enable, set FastRoamEnabled=1
+# To disable, set FastRoamEnabled=0
+FastRoamEnabled=1
+
+# Check if the AP to which we are roaming is better than current AP in
+# terms of RSSI.  Checking is disabled if set to Zero.Otherwise it will
+# use this value as to how better the RSSI of the new/roamable AP should
+# be for roaming
+RoamRssiDiff=5
+
+# To enable, set gRoamIntraBand=1 (Roaming within band)
+# To disable, set gRoamIntraBand=0 (Roaming across band)
+gRoamIntraBand=0
+
+#Short Guard Interval Enable/disable
+gShortGI20Mhz=1
+gShortGI40Mhz=1
+
+#Preferred band (both or 2.4 only or 5 only)
+BandCapability=0
+
+#Channel Bonding
+gChannelBondingMode5GHz=1
+
+#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds).
+#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link
+#is idle for last 10 seconds.) For both active and power save clients.
+
+#Power save clients: DUT set TIM bit from 10th second onwards and till client
+#honors TIM bit. If doesn't honor for 5 seconds then DUT remove client.
+
+#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not
+#success still we try on 11th second if not tries on 12th and so on till 15th
+#second. Hence before disconnection DUT will send 5 NULL frames. Hence in any
+#case DUT will detect client got removed in (10+5) seconds.
+#i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod)..
+
+#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and
+#it is period where we send NULL frame.
+#gApLinkMonitorPeriod = 10
+#gGoLinkMonitorPeriod = 10
+
+#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame
+#are succeed to send or not. Hence total effective detection time is
+# (gGoLinkMonitorPeriod + gGoKeepAlivePeriod) /
+# (gApLinkMonitorPeriod + gApKeepAlivePeriod)
+gGoKeepAlivePeriod = 20
+#ifdef VENDOR_EDIT
+gApKeepAlivePeriod = 20
+#endif /* VENDOR_EDIT */
+
+#If set to 0, will not scan DFS channels
+gEnableDFSChnlScan=1
+
+# Enable DFS channel roam
+# 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE
+gAllowDFSChannelRoam=1
+
+gVhtChannelWidth=2
+
+#ifdef VENDOR_EDIT
+#Data Inactivity Timeout when in powersave (in ms)
+gDataInactivityTimeout=200
+#endif /* VENDOR_EDIT */
+
+# Set txchainmask and rxchainmask
+# These parameters are used only if gEnable2x2 is 0
+# Valid values are 1,2
+# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0.
+# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1.
+gSetTxChainmask1x1=1
+gSetRxChainmask1x1=1
+
+# Scan Timing Parameters
+# gPassiveMaxChannelTime=110
+#ifdef VENDOR_EDIT
+gActiveMaxChannelTime=60
+gActiveMinChannelTime=40
+#else
+#gActiveMaxChannelTime=40
+#gActiveMinChannelTime=20
+#endif /* VENDOR_EDIT */
+
+#If set to 0, MCC is not allowed.
+gEnableMCCMode=1
+
+# MCC to SCC Switch mode:
+# 0-Disable
+# 1-Enable
+# 2-Force SCC if same band, with SAP restart
+# 3-Force SCC if same band, without SAP restart by sending (E)CSA
+# 4-Force SCC if same band (or) use SAP mandatory channel for DBS,
+#   without SAP restart by sending (E)CSA
+gWlanMccToSccSwitchMode = 3
+
+# 1=enable STBC; 0=disable STBC
+gEnableRXSTBC=1
+
+# 1=enable tx STBC; 0=disable
+gEnableTXSTBC=1
+
+# 1=enable rx LDPC; 0=disable
+gEnableRXLDPC=1
+
+#Enable/Disable Tx beamforming
+gTxBFEnable=1
+
+#Enable/Disable Tx beamformee in SAP mode
+gEnableTxBFeeSAP=1
+
+# Enable Tx beamforming in VHT20MHz
+# Valid values are 0,1. If commented out, the default value is 0.
+# 0=disable, 1=enable
+gEnableTxBFin20MHz=1
+
+#Enable/Disable SU Tx beamformer support
+#gEnableTxSUBeamformer=1
+
+gEnableFastRoamInConcurrency=1
+
+# 802.11K support
+gRrmEnable=1
+
+#ifdef VENDOR_EDIT
+#Enable Power Save offload
+gEnablePowerSaveOffload=1
+#else
+#gEnablePowerSaveOffload=2
+
+#Enable firmware uart print
+gEnablefwprint=0
+#endif VENDOR_EDIT
+
+# Firmware log mode
+# Valid values are 0,1,2
+# 0=Disable, 1=WMI, 2=DIAG
+gEnablefwlog=1
+
+# Maximum Receive AMPDU size (VHT only. Valid values:
+# 0->8k 1->16k 2->32k 3->64k 4->128k)
+gVhtAmpduLenExponent=7
+
+# Maximum MPDU length (VHT only. Valid values:
+# 0->3895 octets, 1->7991 octets, 2->11454 octets)
+gVhtMpduLen=2
+
+# WOW Enable/Disable.
+# 0 - Disable both magic pattern match and pattern byte match.
+# 1 - Enable magic pattern match on all interfaces.
+# 2 - Enable pattern byte match on all interfaces.
+# 3 - Enable both magic pattern and pattern byte match on all interfaces.
+# Default value of gEnableWoW is 3.
+# gEnableWoW=0
+
+# Enable or Disable MCC Adaptive Scheduler at the FW
+# 1=Enable (default), 0=Disable
+gEnableMCCAdaptiveScheduler=1
+
+#Enable or Disable p2p device address administered
+isP2pDeviceAddrAdministrated=0
+
+# Set Thermal Power limit
+TxPower2g=10
+TxPower5g=10
+
+# Remove Overlap channel restriction
+gEnableOverLapCh=0
+
+#Enable VHT on 2.4Ghz
+gEnableVhtFor24GHzBand=1
+
+#Maximum number of offload peers supported
+# gMaxOffloadPeers=2
+
+# controlling the following offload patterns
+# through ini parameter. Default value is 1
+# to disable set it to zero. ssdp = 0
+# Setup multicast pattern for mDNS 224.0.0.251,
+# SSDP 239.255.255.250 and LLMNR 224.0.0.252
+ssdp=0
+
+#Enable Memory Deep Sleep
+gEnableMemDeepSleep=1
+
+# RA filtering rate limit param, the current value would not
+# help if the lifetime in RA is less than 3*60=3min. Then
+# we need to change it, though it is uncommon.
+# gRAFilterEnable=0
+gRArateLimitInterval=600
+
+# Maximum number of concurrent connections
+gMaxConcurrentActiveSessions=3
+
+# Disable/Enable GreenAP
+# 0 to disable, 1 to enable, default: 1
+gEnableGreenAp=0
+
+gPNOScanSupport=1
+
+#Enable/Disable LPASS support
+# 0 to disable, 1 to enable
+gEnableLpassSupport=1
+
+# Whether userspace country code setting shld have priority
+gCountryCodePriority=1
+
+# Enable(1)/Disable(0) SIFS burst
+#ifdef VENDOR_EDIT
+#Min: 0  disabled
+#Max: 3  enabled802.11g
+#Default: 1 enabled, but disabled for legacy mode
+gEnableSifsBurst=3
+#else
+# gEnableSifsBurst=1
+# endif /* VENDOR_EDIT */
+
+# Enable or Disable Multi-user MIMO
+# 1=Enable (default), 0=Disable
+gEnableMuBformee=1
+
+# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode
+gIbssTxSpEndInactivityTime=10
+
+# Enable support for TDLS
+#  0 - disable
+#  1 - enable
+gEnableTDLSSupport=1
+
+# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall
+# initiate TDLS Discovery towards a peer whenever setup criteria (throughput
+# and RSSI) is met and then will initiate teardown when teardown criteria
+# (idle packet count and RSSI) is met.
+#  0 - disable
+#  1 - enable
+gEnableTDLSImplicitTrigger=1
+
+# Enable TDLS External Control. That is, user space application has to
+# first configure a peer MAC in wlan driver towards which TDLS is desired.
+# Device will establish TDLS only towards those configured peers whenever
+# TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS
+# when teardown criteria (idle packet count and RSSI) is met. However,
+# device will accept TDLS connection if it is initiated from any other peer,
+# even if that peer is not configured.
+#  0 - disable
+#  1 - enable
+# For TDLS External Control, Implicit Trigger must also be enabled.
+gTDLSExternalControl=1
+
+# Enable support for TDLS off-channel operation
+#  0 - disable
+#  1 - enable
+# TDLS off-channel operation will be invoked when there is only one
+# TDLS connection.
+gEnableTDLSOffChannel=1
+
+# Enable or Disable Random MAC (Spoofing)
+# 1=Enable (default), 0=Disable
+gEnableMacAddrSpoof=1
+
+################ Datapath feature set Begin ################
+# Bus bandwidth threshold values in terms of number of packets
+gBusBandwidthHighThreshold=2000
+gBusBandwidthMediumThreshold=500
+gBusBandwidthLowThreshold=150
+
+# Bus bandwidth compute timeout value in ms
+gBusBandwidthComputeInterval=100
+
+# VHT Tx/Rx MCS values
+# Valid values are 0,1,2. If commented out, the default value is 0.
+# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
+gVhtRxMCS=2
+gVhtTxMCS=2
+
+# VHT Tx/Rx MCS values for 2x2
+# Valid values are 0,1,2. If commented out, the default value is 0.
+# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
+gEnable2x2=1
+gVhtRxMCS2x2=2
+gVhtTxMCS2x2=2
+
+#IPA config is a bit mask and following are the configurations.
+#bit0 IPA Enable
+#bit1 IPA PRE Filter enable
+#bit2 IPv6 enable
+#bit3 IPA Resource Manager (RM) enable
+#bit4 IPA Clock scaling enable
+#bit5 IPA uC ENABLE
+#bit6 IPA uC STA ENABLE
+#bit8 IPA Real Time Debugging
+gIPAConfig=0x7d
+gIPADescSize=800
+
+# Enable/Disable RX full reorder offload
+gReorderOffloadSupported=1
+
+# Enable CE classification
+# 1 - enable(default)  0 - disable
+gCEClassifyEnable=1
+
+# Enable Rx handling options
+# Rx_thread=1 RPS=2(default for ROME) NAPI=4(default for ihelium)
+# DP_RX_THREAD=16 (1 << 4)
+# 20 = (DP_RX_THREAD | NAPI)
+rx_mode=20
+
+# Enable(Tx) fastpath for data traffic.
+# 1 - enable(default)  0 - disable
+gEnableFastPath=1
+
+# This flag enables IP, TCP and UDP checksum offload
+# 1 - enable(default)  0 - disable
+gEnableIpTcpUdpChecksumOffload=1
+
+# Enable TCP Segmentation Offload
+# 1 - enable  0 - disable
+TSOEnable=1
+
+# Enable Generic Receive Offload
+# 1 - enable(default)  0 - disable
+GROEnable=1
+
+# Enable HT MPDU Density
+# 4 for 2 micro sec
+ght_mpdu_density=4
+
+# Enable flow steering to enable multiple CEs for Rx flows.
+# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs.
+# Parallel Rx paths.
+# 1 - enable 0 - disable(default)
+gEnableFlowSteering=1
+
+# Time in microseconds after which a NAPI poll must yield
+ce_service_max_yield_time=500
+
+#Maximum number of HTT messages to be processed per NAPI poll
+ce_service_max_rx_ind_flush=1
+
+# Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND
+maxMSDUsPerRxInd=8
+
+# Enable NUD tracking feature
+# 1 - enable 0 - disable(default)
+#ifndef VENDOR_EDIT
+# richy.li@Connectivity, 2019/10/11, [Q porting] align the vowifi behavior with 18811.
+#gEnableNUDTracking=1
+#else
+gEnableNUDTracking=0
+#endif /* VENDOR_EDIT */
+################ Datapath feature set End ################
+
+################ NAN feature set start ###################
+
+# Enable NAN discovery (NAN 1.0)
+# 1 - enable  0 - disable(default)
+gEnableNanSupport=1
+# Enable NAN Datapath
+genable_nan_datapath=1
+
+################ NAN feature set end #####################
+
+#ifdef VENDOR_EDIT
+adaptive_dwell_mode_enabled=0
+#else
+#adaptive_dwell_mode_enabled=1
+#endif /* VENDOR_EDIT */
+
+hostscan_adaptive_dwell_mode=1
+
+adapt_dwell_lpf_weight=80
+
+adapt_dwell_wifi_act_threshold=10
+
+MAWCEnabled=0
+
+drop_bcn_on_chan_mismatch=0
+
+# Enable/Disable rtt sta mac randomization
+enable_rtt_mac_randomization=1
+
+#Enable/Disable SNR monitoring
+gEnableSNRMonitoring=1
+
+# HTC Credit count for WMI operation
+# 1 to serialize the WMI commands
+# 0 default works with FW advertised credits, 2 credits usually
+gWmiCreditCount=1
+
+# Enable enhanced ACS
+acs_with_more_param=1
+# bits 0-3:   rssi weight
+# bits 4-7:   bss count weight
+# bits 8-11:  noise floor weight
+# bits 12-15: channel free weight
+# bits 16-19: tx power range weight
+# bits 20-23: tx power throughput weight
+# bits 24-31: reserved
+AutoChannelSelectWeight=0x00fafafa
+
+# Enable/Disable broadcast TWT
+bcast_twt=1
+
+# Enable Runtime PM
+#gRuntimePM=1
+
+# Enable broadcast logging to the userspace entities
+gMulticastHostFwMsgs=1
+# Disable packetlog explicitly
+#ifndef VENDOR_EDIT
+#gEnablePacketLog=0
+#else
+global_adapt_dwelltime_mode=1
+roamscan_adaptive_dwell_mode=1
+extscan_adaptive_dwell_mode=1
+pnoscan_adaptive_dwell_mode=1
+active_max_channel_time_2g=60
+#endif /* VENDOR_EDIT */
+
+# Set IPA bandwidth levels in mbps
+gIPALowBandwidthMbps=100
+gIPAMediumBandwidthMbps=400
+gIPAHighBandwidthMbps=800
+spectral_disable=1
+
+END
+
+# Note: Configuration parser would not read anything past the END marker
+
diff --git a/wifi/p2p_supplicant_overlay.conf b/wifi/p2p_supplicant_overlay.conf
new file mode 100644
index 0000000..f31b29e
--- /dev/null
+++ b/wifi/p2p_supplicant_overlay.conf
@@ -0,0 +1,5 @@
+disable_scan_offload=1
+p2p_no_group_iface=1
+persistent_reconnect=1
+bss_max_count=400
+p2p_pref_chan=115:36, 116:36, 115:40, 116:40, 117:40, 115:44, 116:44, 117:44, 115:48, 117:48, 124:149, 125:149, 126:149, 124:153, 125:153, 126:153, 127:153, 124:157, 125:157, 126:157, 127:157, 124:161, 125:161, 127:161, 125:165, 81:1, 81:6, 81:11
diff --git a/wifi/qca6390/WCNSS_qcom_cfg.ini b/wifi/qca6390/WCNSS_qcom_cfg.ini
new file mode 100644
index 0000000..643bc7b
--- /dev/null
+++ b/wifi/qca6390/WCNSS_qcom_cfg.ini
@@ -0,0 +1,566 @@
+# This file allows user to override the factory
+# defaults for the WLAN Driver
+
+#Below ini copied from LA.UM.0.6.3
+# ifdef VENDOR_EDIT
+gDualMacFeatureDisable=6
+gInitialScanNoDFSChnl=1
+#gInitialDwellTime=20
+#ifndef VENDOR_EDIT
+#Use dynamic iwpriv to control
+#gSoftApMaxPeers=8
+#endif VENDOR_EDIT
+gRoamBmissFirstBcnt=15
+gRoamBmissFinalBcnt=25
+gDroppedPktDisconnectTh=1024
+# Runtime is default zero in hostdriver
+gRuntimePM=0
+gRAFilterEnable=0
+gMCAddrListEnable=1
+# 0: disable feature (default)
+# 1: drop all broadcast frames, except ARP
+# 2: drop all multicast frames, except ICMPv6
+# 3: drop all broadcast and multicast frames, except ARP and ICMPv6
+gHwFilterMode=3
+gBpfFilterEnable=1
+#gFwDebugLogLevel=3
+#gFwDebugModuleLoglevel=2,1,3,1,5,1,9,1,13,1,14,1,18,1,19,1,26,1,28,1,29,1,31,1,36,1,38,1,46,1,47,1,50,1,52,1,53,1,56,1,60,1,61,1
+gChannelBondingMode24GHz=0
+gStaKeepAlivePeriod=30
+gper_roam_enabled=3
+gper_roam_th_percent=80
+gper_min_rssi_threshold_for_roam=70
+gItoRepeatCount=5
+gDisablePacketFilter=0
+#ifndef VENDOR_EDIT
+#g_enable_packet_filter_bitmap=3
+#else
+# for layer2(mac) multicast, layer3(ip) multicast filter
+g_enable_packet_filter_bitmap=7
+#endif /* VENDOR_EDIT */
+gEnableModulatedDTIM=3
+gMaxLIModulatedDTIM=6
+#gActiveModeOffload=0
+gReportMaxLinkSpeed=2
+gEnableTDLSScan=1
+gEnableTxSUBeamformer=0
+gEnableSelfRecovery=1
+# endif /* VENDOR_EDIT */
+fw_timeout_crash=1
+
+# Phy Mode (auto, b, g, n, etc)
+# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
+# 1 = 11abg, 2 = 11b, 3 = 11g, 5 = 11g only, 6 = 11n only
+# 7 = 11b only 8 = 11ac only.
+gDot11Mode=0
+
+# UAPSD service interval for VO,VI, BE, BK traffic
+InfraUapsdVoSrvIntv=0
+InfraUapsdViSrvIntv=0
+InfraUapsdBeSrvIntv=0
+InfraUapsdBkSrvIntv=0
+
+# Flag to allow STA send AddTspec even when ACM is Off
+gAddTSWhenACMIsOff=1
+
+# ifdef VENDOR_EDIT
+# Enable IMPS or not
+gEnableImps=1
+
+# Enable BMPS or not
+gEnableBmps=1
+
+# Enable Qpower or not on SM8250_R paltform, 0 for disable
+gOptimizedPowerManagement=0
+
+#Flag to enable HostARPOffload feature or not
+hostArpOffload=1
+
+#Flag to enable HostNSOffload feature or not
+hostNSOffload=1
+# endif /* VENDOR_EDIT */
+
+# 802.11n Protection flag
+gEnableApProt=1
+
+#Enable OBSS protection
+gEnableApOBSSProt=1
+
+#Enable/Disable UAPSD for SoftAP
+gEnableApUapsd=1
+
+# Maximum Tx power
+# gTxPowerCap=30
+
+# Fragmentation Threshold
+# gFragmentationThreshold=2346
+
+# RTS threshold
+RTSThreshold=1048576
+
+# Intra-BSS forward
+gDisableIntraBssFwd=0
+
+# WMM Enable/Disable
+WmmIsEnabled=0
+
+# 802.11d support
+#ifdef VENDOR_EDIT
+g11dSupportEnabled=1
+#else
+#g11dSupportEnabled=0
+#endif /* VENDOR_EDIT */
+
+# 802.11h support
+g11hSupportEnabled=1
+
+# DFS Master Capability
+#ifdef VENDOR_EDIT
+gEnableDFSMasterCap=0
+#else
+#gEnableDFSMasterCap=1
+#endif /* VENDOR_EDIT */
+
+# ESE Support and fast transition
+EseEnabled=0
+
+ImplicitQosIsEnabled=0
+
+gNeighborScanTimerPeriod=200
+gNeighborLookupThreshold=76
+gNeighborScanChannelMinTime=20
+
+# Legacy (non-ESE, non-802.11r) Fast Roaming Support
+# To enable, set FastRoamEnabled=1
+# To disable, set FastRoamEnabled=0
+FastRoamEnabled=1
+
+# Check if the AP to which we are roaming is better than current AP in
+# terms of RSSI.  Checking is disabled if set to Zero.Otherwise it will
+# use this value as to how better the RSSI of the new/roamable AP should
+# be for roaming
+RoamRssiDiff=5
+
+# To enable, set gRoamIntraBand=1 (Roaming within band)
+# To disable, set gRoamIntraBand=0 (Roaming across band)
+gRoamIntraBand=0
+
+#Short Guard Interval Enable/disable
+gShortGI20Mhz=1
+gShortGI40Mhz=1
+
+#Preferred band (both or 2.4 only or 5 only)
+BandCapability=0
+
+#Channel Bonding
+gChannelBondingMode5GHz=1
+
+#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds).
+#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link
+#is idle for last 10 seconds.) For both active and power save clients.
+
+#Power save clients: DUT set TIM bit from 10th second onwards and till client
+#honors TIM bit. If doesn't honor for 5 seconds then DUT remove client.
+
+#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not
+#success still we try on 11th second if not tries on 12th and so on till 15th
+#second. Hence before disconnection DUT will send 5 NULL frames. Hence in any
+#case DUT will detect client got removed in (10+5) seconds.
+#i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod)..
+
+#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and
+#it is period where we send NULL frame.
+#gApLinkMonitorPeriod = 10
+#gGoLinkMonitorPeriod = 10
+
+#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame
+#are succeed to send or not. Hence total effective detection time is
+# (gGoLinkMonitorPeriod + gGoKeepAlivePeriod) /
+# (gApLinkMonitorPeriod + gApKeepAlivePeriod)
+gGoKeepAlivePeriod = 20
+#ifdef VENDOR_EDIT
+gApKeepAlivePeriod = 20
+#endif /* VENDOR_EDIT */
+
+#If set to 0, will not scan DFS channels
+gEnableDFSChnlScan=1
+
+# Enable DFS channel roam
+# 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE
+gAllowDFSChannelRoam=1
+
+#ifdef VENDOR_EDIT
+# Enable ETSI13 hotspot on SRD channel
+etsi13_srd_chan_in_master_mode=1
+#endif VENDOR_EDIT
+
+gVhtChannelWidth=2
+
+#ifdef VENDOR_EDIT
+#Data Inactivity Timeout when in powersave (in ms)
+gDataInactivityTimeout=200
+#endif /* VENDOR_EDIT */
+
+# Set txchainmask and rxchainmask
+# These parameters are used only if gEnable2x2 is 0
+# Valid values are 1,2
+# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0.
+# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1.
+gSetTxChainmask1x1=1
+gSetRxChainmask1x1=1
+
+# Scan Timing Parameters
+# gPassiveMaxChannelTime=110
+#ifdef VENDOR_EDIT
+gActiveMaxChannelTime=60
+gActiveMinChannelTime=40
+#else
+#gActiveMaxChannelTime=40
+#gActiveMinChannelTime=20
+#endif /* VENDOR_EDIT */
+
+#If set to 0, MCC is not allowed.
+gEnableMCCMode=1
+
+# MCC to SCC Switch mode:
+# 0-Disable
+# 1-Enable
+# 2-Force SCC if same band, with SAP restart
+# 3-Force SCC if same band, without SAP restart by sending (E)CSA
+# 4-Force SCC if same band (or) use SAP mandatory channel for DBS,
+#   without SAP restart by sending (E)CSA
+gWlanMccToSccSwitchMode = 3
+
+# 1=enable STBC; 0=disable STBC
+gEnableRXSTBC=1
+
+# 1=enable tx STBC; 0=disable
+gEnableTXSTBC=1
+
+# 1=enable rx LDPC; 0=disable
+gEnableRXLDPC=1
+
+#Enable/Disable Tx beamforming
+gTxBFEnable=1
+
+#Enable/Disable Tx beamformee in SAP mode
+gEnableTxBFeeSAP=1
+
+# Enable Tx beamforming in VHT20MHz
+# Valid values are 0,1. If commented out, the default value is 0.
+# 0=disable, 1=enable
+gEnableTxBFin20MHz=1
+
+#Enable/Disable SU Tx beamformer support
+#gEnableTxSUBeamformer=1
+
+gEnableFastRoamInConcurrency=1
+
+# 802.11K support
+gRrmEnable=1
+
+#ifdef VENDOR_EDIT
+#Enable Power Save offload
+gEnablePowerSaveOffload=1
+#else
+#gEnablePowerSaveOffload=2
+
+#Enable firmware uart print
+gEnablefwprint=0
+#endif VENDOR_EDIT
+
+# Firmware log mode
+# Valid values are 0,1,2
+# 0=Disable, 1=WMI, 2=DIAG
+gEnablefwlog=1
+
+# Maximum Receive AMPDU size (VHT only. Valid values:
+# 0->8k 1->16k 2->32k 3->64k 4->128k)
+gVhtAmpduLenExponent=7
+
+# Maximum MPDU length (VHT only. Valid values:
+# 0->3895 octets, 1->7991 octets, 2->11454 octets)
+gVhtMpduLen=2
+
+# WOW Enable/Disable.
+# 0 - Disable both magic pattern match and pattern byte match.
+# 1 - Enable magic pattern match on all interfaces.
+# 2 - Enable pattern byte match on all interfaces.
+# 3 - Enable both magic pattern and pattern byte match on all interfaces.
+# Default value of gEnableWoW is 3.
+# gEnableWoW=0
+
+# Enable or Disable MCC Adaptive Scheduler at the FW
+# 1=Enable (default), 0=Disable
+gEnableMCCAdaptiveScheduler=1
+
+#Enable or Disable p2p device address administered
+isP2pDeviceAddrAdministrated=0
+
+# Set Thermal Power limit
+TxPower2g=10
+TxPower5g=10
+
+# Remove Overlap channel restriction
+gEnableOverLapCh=0
+
+#Enable VHT on 2.4Ghz
+gEnableVhtFor24GHzBand=1
+
+#Maximum number of offload peers supported
+# gMaxOffloadPeers=2
+
+# controlling the following offload patterns
+# through ini parameter. Default value is 1
+# to disable set it to zero. ssdp = 0
+# Setup multicast pattern for mDNS 224.0.0.251,
+# SSDP 239.255.255.250 and LLMNR 224.0.0.252
+ssdp=0
+
+#Enable Memory Deep Sleep
+gEnableMemDeepSleep=1
+
+# RA filtering rate limit param, the current value would not
+# help if the lifetime in RA is less than 3*60=3min. Then
+# we need to change it, though it is uncommon.
+# gRAFilterEnable=0
+gRArateLimitInterval=600
+
+# Maximum number of concurrent connections
+gMaxConcurrentActiveSessions=3
+
+# Disable/Enable GreenAP
+# 0 to disable, 1 to enable, default: 1
+gEnableGreenAp=0
+
+gPNOScanSupport=1
+
+#Enable/Disable LPASS support
+# 0 to disable, 1 to enable
+gEnableLpassSupport=1
+
+# Whether userspace country code setting shld have priority
+gCountryCodePriority=1
+
+# Enable(1)/Disable(0) SIFS burst
+#ifdef VENDOR_EDIT
+#Min: 0  disabled
+#Max: 3  enabled802.11g
+#Default: 1 enabled, but disabled for legacy mode
+gEnableSifsBurst=3
+#else
+# gEnableSifsBurst=1
+# endif /* VENDOR_EDIT */
+
+# Enable or Disable Multi-user MIMO
+# 1=Enable (default), 0=Disable
+gEnableMuBformee=1
+
+# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode
+gIbssTxSpEndInactivityTime=10
+
+# Enable support for TDLS
+#  0 - disable
+#  1 - enable
+gEnableTDLSSupport=1
+
+# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall
+# initiate TDLS Discovery towards a peer whenever setup criteria (throughput
+# and RSSI) is met and then will initiate teardown when teardown criteria
+# (idle packet count and RSSI) is met.
+#  0 - disable
+#  1 - enable
+gEnableTDLSImplicitTrigger=1
+
+# Enable TDLS External Control. That is, user space application has to
+# first configure a peer MAC in wlan driver towards which TDLS is desired.
+# Device will establish TDLS only towards those configured peers whenever
+# TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS
+# when teardown criteria (idle packet count and RSSI) is met. However,
+# device will accept TDLS connection if it is initiated from any other peer,
+# even if that peer is not configured.
+#  0 - disable
+#  1 - enable
+# For TDLS External Control, Implicit Trigger must also be enabled.
+gTDLSExternalControl=1
+
+# Enable support for TDLS off-channel operation
+#  0 - disable
+#  1 - enable
+# TDLS off-channel operation will be invoked when there is only one
+# TDLS connection.
+gEnableTDLSOffChannel=1
+
+# Enable or Disable Random MAC (Spoofing)
+# 1=Enable (default), 0=Disable
+gEnableMacAddrSpoof=1
+
+################ Datapath feature set Begin ################
+# Bus bandwidth threshold values in terms of number of packets
+gBusBandwidthHighThreshold=2000
+gBusBandwidthMediumThreshold=500
+gBusBandwidthLowThreshold=150
+
+# Bus bandwidth compute timeout value in ms
+gBusBandwidthComputeInterval=100
+
+# VHT Tx/Rx MCS values
+# Valid values are 0,1,2. If commented out, the default value is 0.
+# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
+gVhtRxMCS=2
+gVhtTxMCS=2
+
+# VHT Tx/Rx MCS values for 2x2
+# Valid values are 0,1,2. If commented out, the default value is 0.
+# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
+gEnable2x2=1
+gVhtRxMCS2x2=2
+gVhtTxMCS2x2=2
+
+#IPA config is a bit mask and following are the configurations.
+#bit0 IPA Enable
+#bit1 IPA PRE Filter enable
+#bit2 IPv6 enable
+#bit3 IPA Resource Manager (RM) enable
+#bit4 IPA Clock scaling enable
+#bit5 IPA uC ENABLE
+#bit6 IPA uC STA ENABLE
+#bit8 IPA Real Time Debugging
+gIPAConfig=0x7d
+gIPADescSize=800
+
+# Enable/Disable RX full reorder offload
+gReorderOffloadSupported=1
+
+# Enable CE classification
+# 1 - enable(default)  0 - disable
+gCEClassifyEnable=1
+
+# Enable Rx handling options
+# Rx_thread=1 RPS=2(default for ROME) NAPI=4(default for ihelium)
+# DP_RX_THREAD=16 (1 << 4)
+# 20 = (DP_RX_THREAD | NAPI)
+rx_mode=20
+
+# Enable(Tx) fastpath for data traffic.
+# 1 - enable(default)  0 - disable
+gEnableFastPath=1
+
+# This flag enables IP, TCP and UDP checksum offload
+# 1 - enable(default)  0 - disable
+gEnableIpTcpUdpChecksumOffload=1
+
+# Enable TCP Segmentation Offload
+# 1 - enable  0 - disable
+TSOEnable=1
+
+# Enable Generic Receive Offload
+# 1 - enable(default)  0 - disable
+GROEnable=1
+
+# Enable HT MPDU Density
+# 4 for 2 micro sec
+ght_mpdu_density=4
+
+# Enable flow steering to enable multiple CEs for Rx flows.
+# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs.
+# Parallel Rx paths.
+# 1 - enable 0 - disable(default)
+gEnableFlowSteering=1
+
+# Time in microseconds after which a NAPI poll must yield
+ce_service_max_yield_time=500
+
+#Maximum number of HTT messages to be processed per NAPI poll
+ce_service_max_rx_ind_flush=1
+
+# Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND
+maxMSDUsPerRxInd=8
+
+# Enable NUD tracking feature
+# 1 - enable 0 - disable(default)
+#ifndef VENDOR_EDIT
+# richy.li@Connectivity, 2019/10/11, [Q porting] align the vowifi behavior with 18811.
+#gEnableNUDTracking=1
+#else
+gEnableNUDTracking=0
+#endif /* VENDOR_EDIT */
+################ Datapath feature set End ################
+
+################ NAN feature set start ###################
+
+# Enable NAN discovery (NAN 1.0)
+# 1 - enable  0 - disable(default)
+gEnableNanSupport=1
+# Enable NAN Datapath
+genable_nan_datapath=1
+
+################ NAN feature set end #####################
+
+#ifdef VENDOR_EDIT
+adaptive_dwell_mode_enabled=0
+#else
+#adaptive_dwell_mode_enabled=1
+#endif /* VENDOR_EDIT */
+
+hostscan_adaptive_dwell_mode=1
+
+adapt_dwell_lpf_weight=80
+
+adapt_dwell_wifi_act_threshold=10
+
+MAWCEnabled=0
+
+drop_bcn_on_chan_mismatch=0
+
+# Enable/Disable rtt sta mac randomization
+enable_rtt_mac_randomization=1
+
+#Enable/Disable SNR monitoring
+gEnableSNRMonitoring=1
+
+# HTC Credit count for WMI operation
+# 1 to serialize the WMI commands
+# 0 default works with FW advertised credits, 2 credits usually
+gWmiCreditCount=1
+
+# Enable enhanced ACS
+acs_with_more_param=1
+# bits 0-3:   rssi weight
+# bits 4-7:   bss count weight
+# bits 8-11:  noise floor weight
+# bits 12-15: channel free weight
+# bits 16-19: tx power range weight
+# bits 20-23: tx power throughput weight
+# bits 24-31: reserved
+AutoChannelSelectWeight=0x00fafafa
+
+# Enable/Disable broadcast TWT
+bcast_twt=1
+
+# Enable Runtime PM
+#gRuntimePM=1
+
+# Enable broadcast logging to the userspace entities
+gMulticastHostFwMsgs=1
+# Disable packetlog explicitly
+#ifndef VENDOR_EDIT
+#gEnablePacketLog=0
+#else
+global_adapt_dwelltime_mode=1
+roamscan_adaptive_dwell_mode=1
+extscan_adaptive_dwell_mode=1
+pnoscan_adaptive_dwell_mode=1
+active_max_channel_time_2g=60
+#endif /* VENDOR_EDIT */
+
+# Set IPA bandwidth levels in mbps
+gIPALowBandwidthMbps=100
+gIPAMediumBandwidthMbps=400
+gIPAHighBandwidthMbps=800
+spectral_disable=1
+
+END
+
+# Note: Configuration parser would not read anything past the END marker
+
diff --git a/wifi/qca6390/WCNSS_qcom_cfg_cta_kona_8.ini b/wifi/qca6390/WCNSS_qcom_cfg_cta_kona_8.ini
new file mode 100644
index 0000000..396e7f4
--- /dev/null
+++ b/wifi/qca6390/WCNSS_qcom_cfg_cta_kona_8.ini
@@ -0,0 +1,565 @@
+# This file allows user to override the factory
+# defaults for the WLAN Driver
+
+#Below ini copied from LA.UM.0.6.3
+# ifdef VENDOR_EDIT
+# CTA test config
+gEnableImps=0
+gEnableBmps=0
+EseEnabled=0
+FastRoamEnabled=0
+gPNOScanSupport=0
+gEnablePowerSaveOffload=1
+gRuntimePM=0
+gEnableFWRssiMonitoring=0
+gRoamOffloadEnabled=0
+gRoamScanOffloadEnabled=0
+
+#TODO: this flag will cause wifi enabled fail
+#FastTransitionEnabled=0
+# CTA test config
+gInitialScanNoDFSChnl=1
+#gInitialDwellTime=20
+gSoftApMaxPeers=8
+gRoamBmissFirstBcnt=15
+gRoamBmissFinalBcnt=25
+gDroppedPktDisconnectTh=1024
+# Runtime is default zero in hostdriver
+#gRuntimePM=0
+gRAFilterEnable=0
+gMCAddrListEnable=1
+# 0: disable feature (default)
+# 1: drop all broadcast frames, except ARP
+# 2: drop all multicast frames, except ICMPv6
+# 3: drop all broadcast and multicast frames, except ARP and ICMPv6
+gHwFilterMode=3
+gBpfFilterEnable=1
+#gFwDebugLogLevel=3
+#gFwDebugModuleLoglevel=2,1,3,1,5,1,9,1,13,1,14,1,18,1,19,1,26,1,28,1,29,1,31,1,36,1,38,1,46,1,47,1,50,1,52,1,53,1,56,1,60,1,61,1
+gChannelBondingMode24GHz=0
+gForce1x1Exception=0
+gStaKeepAlivePeriod=30
+gper_roam_enabled=3
+gper_roam_th_percent=80
+gper_min_rssi_threshold_for_roam=70
+gItoRepeatCount=5
+gDisablePacketFilter=0
+g_enable_packet_filter_bitmap=3
+LROEnable=0
+gEnableModulatedDTIM=3
+gMaxLIModulatedDTIM=6
+#gActiveModeOffload=0
+gActionOUISwitchTo11nMode="FFFFFF 03 FFFFBF 20 21 40"
+gReportMaxLinkSpeed=2
+gEnableSelfRecovery=0
+gEnableTxSUBeamformer=0
+# endif /* VENDOR_EDIT */
+fw_timeout_crash=1
+
+# Phy Mode (auto, b, g, n, etc)
+# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
+# 1 = 11abg, 2 = 11b, 3 = 11g, 5 = 11g only, 6 = 11n only
+# 7 = 11b only 8 = 11ac only.
+gDot11Mode=0
+
+# UAPSD service interval for VO,VI, BE, BK traffic
+InfraUapsdVoSrvIntv=0
+InfraUapsdViSrvIntv=0
+InfraUapsdBeSrvIntv=0
+InfraUapsdBkSrvIntv=0
+
+# Flag to allow STA send AddTspec even when ACM is Off
+gAddTSWhenACMIsOff=1
+
+# ifdef VENDOR_EDIT
+# Enable IMPS or not
+#gEnableImps=1
+
+# Enable BMPS or not
+#gEnableBmps=1
+
+#Flag to enable HostARPOffload feature or not
+hostArpOffload=1
+
+#Flag to enable HostNSOffload feature or not
+hostNSOffload=1
+# endif /* VENDOR_EDIT */
+
+# 802.11n Protection flag
+gEnableApProt=1
+
+#Enable OBSS protection
+gEnableApOBSSProt=1
+
+#Enable/Disable UAPSD for SoftAP
+gEnableApUapsd=1
+
+# Maximum Tx power
+# gTxPowerCap=30
+
+# Fragmentation Threshold
+# gFragmentationThreshold=2346
+
+# RTS threshold
+RTSThreshold=1048576
+
+# Intra-BSS forward
+gDisableIntraBssFwd=0
+
+# WMM Enable/Disable
+WmmIsEnabled=0
+
+# 802.11d support
+#ifdef VENDOR_EDIT
+g11dSupportEnabled=1
+#else
+#g11dSupportEnabled=0
+#endif /* VENDOR_EDIT */
+
+# 802.11h support
+g11hSupportEnabled=1
+
+# DFS Master Capability
+gEnableDFSMasterCap=1
+
+
+# ESE Support and fast transition
+# EseEnabled=0
+
+ImplicitQosIsEnabled=0
+
+gNeighborScanTimerPeriod=200
+gNeighborLookupThreshold=76
+gNeighborScanChannelMinTime=20
+
+# Legacy (non-ESE, non-802.11r) Fast Roaming Support
+# To enable, set FastRoamEnabled=1
+# To disable, set FastRoamEnabled=0
+#FastRoamEnabled=1
+
+# Check if the AP to which we are roaming is better than current AP in
+# terms of RSSI.  Checking is disabled if set to Zero.Otherwise it will
+# use this value as to how better the RSSI of the new/roamable AP should
+# be for roaming
+RoamRssiDiff=5
+
+# To enable, set gRoamIntraBand=1 (Roaming within band)
+# To disable, set gRoamIntraBand=0 (Roaming across band)
+gRoamIntraBand=0
+
+#Short Guard Interval Enable/disable
+gShortGI20Mhz=1
+gShortGI40Mhz=1
+
+#Preferred band (both or 2.4 only or 5 only)
+BandCapability=0
+
+#Channel Bonding
+gChannelBondingMode5GHz=1
+
+#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds).
+#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link
+#is idle for last 10 seconds.) For both active and power save clients.
+
+#Power save clients: DUT set TIM bit from 10th second onwards and till client
+#honors TIM bit. If doesn't honor for 5 seconds then DUT remove client.
+
+#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not
+#success still we try on 11th second if not tries on 12th and so on till 15th
+#second. Hence before disconnection DUT will send 5 NULL frames. Hence in any
+#case DUT will detect client got removed in (10+5) seconds.
+#i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod)..
+
+#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and
+#it is period where we send NULL frame.
+#gApLinkMonitorPeriod = 10
+#gGoLinkMonitorPeriod = 10
+
+#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame
+#are succeed to send or not. Hence total effective detection time is
+# (gGoLinkMonitorPeriod + gGoKeepAlivePeriod) /
+# (gApLinkMonitorPeriod + gApKeepAlivePeriod)
+gGoKeepAlivePeriod = 20
+#ifdef VENDOR_EDIT
+gApKeepAlivePeriod = 20
+#endif /* VENDOR_EDIT */
+
+#If set to 0, will not scan DFS channels
+gEnableDFSChnlScan=1
+
+# Enable DFS channel roam
+# 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE
+gAllowDFSChannelRoam=1
+
+gVhtChannelWidth=2
+
+#ifdef VENDOR_EDIT
+#Data Inactivity Timeout when in powersave (in ms)
+gDataInactivityTimeout=200
+#endif /* VENDOR_EDIT */
+
+# Set txchainmask and rxchainmask
+# These parameters are used only if gEnable2x2 is 0
+# Valid values are 1,2
+# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0.
+# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1.
+gSetTxChainmask1x1=1
+gSetRxChainmask1x1=1
+
+# Scan Timing Parameters
+# gPassiveMaxChannelTime=110
+#ifdef VENDOR_EDIT
+gActiveMaxChannelTime=60
+gActiveMinChannelTime=40
+#else
+#gActiveMaxChannelTime=40
+#gActiveMinChannelTime=20
+#endif /* VENDOR_EDIT */
+
+#If set to 0, MCC is not allowed.
+gEnableMCCMode=1
+
+# MCC to SCC Switch mode:
+# 0-Disable
+# 1-Enable
+# 2-Force SCC if same band, with SAP restart
+# 3-Force SCC if same band, without SAP restart by sending (E)CSA
+# 4-Force SCC if same band (or) use SAP mandatory channel for DBS,
+#   without SAP restart by sending (E)CSA
+gWlanMccToSccSwitchMode = 3
+
+# 1=enable STBC; 0=disable STBC
+gEnableRXSTBC=1
+
+# 1=enable tx STBC; 0=disable
+gEnableTXSTBC=1
+
+# 1=enable rx LDPC; 0=disable
+gEnableRXLDPC=1
+
+#Enable/Disable Tx beamforming
+gTxBFEnable=1
+
+#Enable/Disable Tx beamformee in SAP mode
+gEnableTxBFeeSAP=1
+
+# Enable Tx beamforming in VHT20MHz
+# Valid values are 0,1. If commented out, the default value is 0.
+# 0=disable, 1=enable
+gEnableTxBFin20MHz=1
+
+#Enable/Disable SU Tx beamformer support
+#gEnableTxSUBeamformer=1
+
+gEnableFastRoamInConcurrency=1
+
+# 802.11K support
+gRrmEnable=1
+
+#ifdef VENDOR_EDIT
+#Enable Power Save offload
+#gEnablePowerSaveOffload=1
+#else
+#gEnablePowerSaveOffload=2
+
+#Enable firmware uart print
+gEnablefwprint=0
+#endif VENDOR_EDIT
+
+# Firmware log mode
+# Valid values are 0,1,2
+# 0=Disable, 1=WMI, 2=DIAG
+gEnablefwlog=1
+
+# Maximum Receive AMPDU size (VHT only. Valid values:
+# 0->8k 1->16k 2->32k 3->64k 4->128k)
+gVhtAmpduLenExponent=7
+
+# Maximum MPDU length (VHT only. Valid values:
+# 0->3895 octets, 1->7991 octets, 2->11454 octets)
+gVhtMpduLen=2
+
+# WOW Enable/Disable.
+# 0 - Disable both magic pattern match and pattern byte match.
+# 1 - Enable magic pattern match on all interfaces.
+# 2 - Enable pattern byte match on all interfaces.
+# 3 - Enable both magic pattern and pattern byte match on all interfaces.
+# Default value of gEnableWoW is 3.
+# gEnableWoW=0
+
+# Enable or Disable MCC Adaptive Scheduler at the FW
+# 1=Enable (default), 0=Disable
+gEnableMCCAdaptiveScheduler=1
+
+#Enable or Disable p2p device address administered
+isP2pDeviceAddrAdministrated=0
+
+# Set Thermal Power limit
+TxPower2g=10
+TxPower5g=10
+
+# Remove Overlap channel restriction
+gEnableOverLapCh=0
+
+#Enable VHT on 2.4Ghz
+gEnableVhtFor24GHzBand=1
+
+#Maximum number of offload peers supported
+# gMaxOffloadPeers=2
+
+# controlling the following offload patterns
+# through ini parameter. Default value is 1
+# to disable set it to zero. ssdp = 0
+# Setup multicast pattern for mDNS 224.0.0.251,
+# SSDP 239.255.255.250 and LLMNR 224.0.0.252
+ssdp=0
+
+#Enable Memory Deep Sleep
+gEnableMemDeepSleep=1
+
+# RA filtering rate limit param, the current value would not
+# help if the lifetime in RA is less than 3*60=3min. Then
+# we need to change it, though it is uncommon.
+# gRAFilterEnable=0
+gRArateLimitInterval=600
+
+# Maximum number of concurrent connections
+gMaxConcurrentActiveSessions=3
+
+# Disable/Enable GreenAP
+# 0 to disable, 1 to enable, default: 1
+gEnableGreenAp=0
+
+#gPNOScanSupport=1
+
+#Enable/Disable LPASS support
+# 0 to disable, 1 to enable
+gEnableLpassSupport=1
+
+# Whether userspace country code setting shld have priority
+gCountryCodePriority=1
+
+# Enable(1)/Disable(0) SIFS burst
+#ifdef VENDOR_EDIT
+#Min: 0  disabled
+#Max: 3  enabled802.11g
+#Default: 1 enabled, but disabled for legacy mode
+gEnableSifsBurst=3
+#else
+# gEnableSifsBurst=1
+# endif /* VENDOR_EDIT */
+
+# Enable or Disable Multi-user MIMO
+# 1=Enable (default), 0=Disable
+gEnableMuBformee=1
+
+# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode
+gIbssTxSpEndInactivityTime=10
+
+# Enable support for TDLS
+#  0 - disable
+#  1 - enable
+gEnableTDLSSupport=1
+
+# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall
+# initiate TDLS Discovery towards a peer whenever setup criteria (throughput
+# and RSSI) is met and then will initiate teardown when teardown criteria
+# (idle packet count and RSSI) is met.
+#  0 - disable
+#  1 - enable
+gEnableTDLSImplicitTrigger=1
+
+# Enable TDLS External Control. That is, user space application has to
+# first configure a peer MAC in wlan driver towards which TDLS is desired.
+# Device will establish TDLS only towards those configured peers whenever
+# TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS
+# when teardown criteria (idle packet count and RSSI) is met. However,
+# device will accept TDLS connection if it is initiated from any other peer,
+# even if that peer is not configured.
+#  0 - disable
+#  1 - enable
+# For TDLS External Control, Implicit Trigger must also be enabled.
+gTDLSExternalControl=1
+
+# Enable support for TDLS off-channel operation
+#  0 - disable
+#  1 - enable
+# TDLS off-channel operation will be invoked when there is only one
+# TDLS connection.
+gEnableTDLSOffChannel=1
+
+# Enable or Disable Random MAC (Spoofing)
+# 1=Enable (default), 0=Disable
+gEnableMacAddrSpoof=1
+
+################ Datapath feature set Begin ################
+# Bus bandwidth threshold values in terms of number of packets
+gBusBandwidthHighThreshold=2000
+gBusBandwidthMediumThreshold=500
+gBusBandwidthLowThreshold=150
+
+# Bus bandwidth compute timeout value in ms
+gBusBandwidthComputeInterval=100
+
+# VHT Tx/Rx MCS values
+# Valid values are 0,1,2. If commented out, the default value is 0.
+# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
+gVhtRxMCS=2
+gVhtTxMCS=2
+
+# VHT Tx/Rx MCS values for 2x2
+# Valid values are 0,1,2. If commented out, the default value is 0.
+# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
+gEnable2x2=1
+gVhtRxMCS2x2=2
+gVhtTxMCS2x2=2
+
+#IPA config is a bit mask and following are the configurations.
+#bit0 IPA Enable
+#bit1 IPA PRE Filter enable
+#bit2 IPv6 enable
+#bit3 IPA Resource Manager (RM) enable
+#bit4 IPA Clock scaling enable
+#bit5 IPA uC ENABLE
+#bit6 IPA uC STA ENABLE
+#bit8 IPA Real Time Debugging
+gIPAConfig=0x7d
+gIPADescSize=800
+
+# Enable/Disable RX full reorder offload
+gReorderOffloadSupported=1
+
+# Enable CE classification
+# 1 - enable(default)  0 - disable
+gCEClassifyEnable=1
+
+# Enable Rx handling options
+# Rx_thread=1 RPS=2(default for ROME) NAPI=4(default for ihelium)
+# DP_RX_THREAD=16 (1 << 4)
+# 20 = (DP_RX_THREAD | NAPI)
+rx_mode=20
+
+# Enable(Tx) fastpath for data traffic.
+# 1 - enable(default)  0 - disable
+gEnableFastPath=1
+
+# This flag enables IP, TCP and UDP checksum offload
+# 1 - enable(default)  0 - disable
+gEnableIpTcpUdpChecksumOffload=1
+
+# Enable TCP Segmentation Offload
+# 1 - enable  0 - disable
+TSOEnable=1
+
+# Enable Generic Receive Offload
+# 1 - enable(default)  0 - disable
+GROEnable=1
+
+# Enable HT MPDU Density
+# 4 for 2 micro sec
+ght_mpdu_density=4
+
+# Enable flow steering to enable multiple CEs for Rx flows.
+# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs.
+# Parallel Rx paths.
+# 1 - enable 0 - disable(default)
+gEnableFlowSteering=1
+
+# Time in microseconds after which a NAPI poll must yield
+ce_service_max_yield_time=500
+
+#Maximum number of HTT messages to be processed per NAPI poll
+ce_service_max_rx_ind_flush=1
+
+# Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND
+maxMSDUsPerRxInd=8
+
+# Enable NUD tracking feature
+# 1 - enable 0 - disable(default)
+#ifndef VENDOR_EDIT
+# richy.li@Connectivity, 2019/10/11, [Q porting] align the vowifi behavior with 18811.
+#gEnableNUDTracking=1
+#else
+gEnableNUDTracking=0
+#endif /* VENDOR_EDIT */
+################ Datapath feature set End ################
+
+################ NAN feature set start ###################
+
+# Enable NAN discovery (NAN 1.0)
+# 1 - enable  0 - disable(default)
+gEnableNanSupport=1
+# Enable NAN Datapath
+genable_nan_datapath=1
+
+################ NAN feature set end #####################
+
+#ifdef VENDOR_EDIT
+adaptive_dwell_mode_enabled=0
+#else
+#adaptive_dwell_mode_enabled=1
+#endif /* VENDOR_EDIT */
+
+hostscan_adaptive_dwell_mode=1
+
+adapt_dwell_lpf_weight=80
+
+adapt_dwell_wifi_act_threshold=10
+
+MAWCEnabled=0
+
+drop_bcn_on_chan_mismatch=0
+
+# Enable/Disable rtt sta mac randomization
+enable_rtt_mac_randomization=1
+
+#Enable/Disable SNR monitoring
+gEnableSNRMonitoring=1
+
+# HTC Credit count for WMI operation
+# 1 to serialize the WMI commands
+# 0 default works with FW advertised credits, 2 credits usually
+gWmiCreditCount=1
+
+# Enable enhanced ACS
+acs_with_more_param=1
+# bits 0-3:   rssi weight
+# bits 4-7:   bss count weight
+# bits 8-11:  noise floor weight
+# bits 12-15: channel free weight
+# bits 16-19: tx power range weight
+# bits 20-23: tx power throughput weight
+# bits 24-31: reserved
+AutoChannelSelectWeight=0x00fafafa
+
+# Enable/Disable broadcast TWT
+bcast_twt=1
+
+# Enable Runtime PM
+gRuntimePM=1
+
+# Enable broadcast logging to the userspace entities
+gMulticastHostFwMsgs=1
+# Disable packetlog explicitly
+#ifndef VENDOR_EDIT
+#gEnablePacketLog=0
+#else
+global_adapt_dwelltime_mode=1
+roamscan_adaptive_dwell_mode=1
+extscan_adaptive_dwell_mode=1
+pnoscan_adaptive_dwell_mode=1
+active_max_channel_time_2g=60
+gcmp_enabled=0
+gEnablePacketLog=1
+#endif /* VENDOR_EDIT */
+
+# Set IPA bandwidth levels in mbps
+gIPALowBandwidthMbps=100
+gIPAMediumBandwidthMbps=400
+gIPAHighBandwidthMbps=800
+spectral_disable=1
+
+END
+
+# Note: Configuration parser would not read anything past the END marker
+
diff --git a/wifi/wpa_supplicant_overlay.conf b/wifi/wpa_supplicant_overlay.conf
new file mode 100644
index 0000000..c263fe3
--- /dev/null
+++ b/wifi/wpa_supplicant_overlay.conf
@@ -0,0 +1,6 @@
+disable_scan_offload=1
+p2p_disabled=1
+tdls_external_control=1
+wowlan_triggers=magic_pkt
+bss_max_count=400
+interworking=1