From 708e31edf4a8cf2ea663c8e6d2ee51ee452801ca Mon Sep 17 00:00:00 2001 From: Alexander Koskovich Date: Sun, 10 Apr 2022 23:35:03 -0700 Subject: [PATCH] sm8350-common: Remove unused WCNSS configurations Change-Id: Ifa24c7d37813b132a3ea065209bb87dcada39b29 --- common.mk | 2 - wifi/WCNSS_qcom_cfg_roam.ini | 447 ------------------------- wifi/WCNSS_qcom_cfg_setchain.ini | 554 ------------------------------- 3 files changed, 1003 deletions(-) delete mode 100644 wifi/WCNSS_qcom_cfg_roam.ini delete mode 100644 wifi/WCNSS_qcom_cfg_setchain.ini diff --git a/common.mk b/common.mk index db1f64b..2c73ea3 100644 --- a/common.mk +++ b/common.mk @@ -538,8 +538,6 @@ PRODUCT_PACKAGES += \ PRODUCT_COPY_FILES += \ $(LOCAL_PATH)/wifi/WCNSS_qcom_cfg.ini:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/WCNSS_qcom_cfg.ini \ - $(LOCAL_PATH)/wifi/WCNSS_qcom_cfg_roam.ini:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/WCNSS_qcom_cfg_roam.ini \ - $(LOCAL_PATH)/wifi/WCNSS_qcom_cfg_setchain.ini:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/WCNSS_qcom_cfg_setchain.ini \ $(LOCAL_PATH)/wifi/p2p_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/p2p_supplicant_overlay.conf \ $(LOCAL_PATH)/wifi/wpa_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/wpa_supplicant_overlay.conf diff --git a/wifi/WCNSS_qcom_cfg_roam.ini b/wifi/WCNSS_qcom_cfg_roam.ini deleted file mode 100644 index eaf94ff..0000000 --- a/wifi/WCNSS_qcom_cfg_roam.ini +++ /dev/null @@ -1,447 +0,0 @@ -# This file allows user to override the factory -# for close wifi roam -gEnableImps = 0 -gEnableBmps = 0 -gRoamOffloadEnabled=0 -gRoamScanOffloadEnabled=0 -#Below ini copied from LA.UM.0.6.3 -fw_timeout_crash=1 - -# Phy Mode (auto, b, g, n, etc) -# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac -# 1 = 11abg, 2 = 11b, 3 = 11g, 5 = 11g only, 6 = 11n only -# 7 = 11b only 8 = 11ac only. -gDot11Mode=0 - -# UAPSD service interval for VO,VI, BE, BK traffic -InfraUapsdVoSrvIntv=0 -InfraUapsdViSrvIntv=0 -InfraUapsdBeSrvIntv=0 -InfraUapsdBkSrvIntv=0 - -# Flag to allow STA send AddTspec even when ACM is Off -gAddTSWhenACMIsOff=1 - -# 802.11n Protection flag -gEnableApProt=1 - -#Enable OBSS protection -gEnableApOBSSProt=1 - -#Enable/Disable UAPSD for SoftAP -gEnableApUapsd=1 - -# Maximum Tx power -# gTxPowerCap=30 - -# Fragmentation Threshold -# gFragmentationThreshold=2346 - -# RTS threshold -RTSThreshold=1048576 - -# Intra-BSS forward -gDisableIntraBssFwd=0 - -# WMM Enable/Disable -WmmIsEnabled=0 - -# 802.11d support -g11dSupportEnabled=0 - -# 802.11h support -g11hSupportEnabled=1 - -# DFS Master Capability -gEnableDFSMasterCap=1 - -# ESE Support and fast transition -EseEnabled=0 - -ImplicitQosIsEnabled=0 - -gNeighborScanTimerPeriod=200 -gNeighborLookupThreshold=76 -gNeighborScanChannelMinTime=20 - -# Legacy (non-ESE, non-802.11r) Fast Roaming Support -# To enable, set FastRoamEnabled=1 -# To disable, set FastRoamEnabled=0 -FastRoamEnabled=1 - -# Check if the AP to which we are roaming is better than current AP in -# terms of RSSI. Checking is disabled if set to Zero.Otherwise it will -# use this value as to how better the RSSI of the new/roamable AP should -# be for roaming -RoamRssiDiff=5 - -# To enable, set gRoamIntraBand=1 (Roaming within band) -# To disable, set gRoamIntraBand=0 (Roaming across band) -gRoamIntraBand=0 - -#Short Guard Interval Enable/disable -gShortGI20Mhz=1 -gShortGI40Mhz=1 - -#Preferred band (both or 2.4 only or 5 only) -BandCapability=0 - -#Channel Bonding -gChannelBondingMode5GHz=1 - -#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds). -#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link -#is idle for last 10 seconds.) For both active and power save clients. - -#Power save clients: DUT set TIM bit from 10th second onwards and till client -#honors TIM bit. If doesn't honor for 5 seconds then DUT remove client. - -#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not -#success still we try on 11th second if not tries on 12th and so on till 15th -#second. Hence before disconnection DUT will send 5 NULL frames. Hence in any -#case DUT will detect client got removed in (10+5) seconds. -#i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod).. - -#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and -#it is period where we send NULL frame. -#gApLinkMonitorPeriod = 10 -#gGoLinkMonitorPeriod = 10 - -#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame -#are succeed to send or not. Hence total effective detection time is -# (gGoLinkMonitorPeriod + gGoKeepAlivePeriod) / -# (gApLinkMonitorPeriod + gApKeepAlivePeriod) -gGoKeepAlivePeriod = 20 - -#If set to 0, will not scan DFS channels -gEnableDFSChnlScan=1 - -# Enable DFS channel roam -# 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE -gAllowDFSChannelRoam=1 - -gVhtChannelWidth=2 - -# Set txchainmask and rxchainmask -# These parameters are used only if gEnable2x2 is 0 -# Valid values are 1,2 -# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0. -# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1. -gSetTxChainmask1x1=1 -gSetRxChainmask1x1=1 - -# Scan Timing Parameters -# gPassiveMaxChannelTime=110 -gActiveMaxChannelTime=40 - -#If set to 0, MCC is not allowed. -gEnableMCCMode=1 - -# MCC to SCC Switch mode: -# 0-Disable -# 1-Enable -# 2-Force SCC if same band, with SAP restart -# 3-Force SCC if same band, without SAP restart by sending (E)CSA -# 4-Force SCC if same band (or) use SAP mandatory channel for DBS, -# without SAP restart by sending (E)CSA -gWlanMccToSccSwitchMode = 3 - -# 1=enable STBC; 0=disable STBC -gEnableRXSTBC=1 - -# 1=enable tx STBC; 0=disable -gEnableTXSTBC=1 - -# 1=enable rx LDPC; 0=disable -gEnableRXLDPC=1 - -#Enable/Disable Tx beamforming -gTxBFEnable=1 - -#Enable/Disable Tx beamformee in SAP mode -gEnableTxBFeeSAP=1 - -# Enable Tx beamforming in VHT20MHz -# Valid values are 0,1. If commented out, the default value is 0. -# 0=disable, 1=enable -gEnableTxBFin20MHz=1 - -#Enable/Disable SU Tx beamformer support -gEnableTxSUBeamformer=0 - -gEnableFastRoamInConcurrency=1 - -# 802.11K support -gRrmEnable=1 - -# Firmware log mode -# Valid values are 0,1,2 -# 0=Disable, 1=WMI, 2=DIAG -gEnablefwlog=1 - -# Maximum Receive AMPDU size (VHT only. Valid values: -# 0->8k 1->16k 2->32k 3->64k 4->128k) -gVhtAmpduLenExponent=7 - -# Maximum MPDU length (VHT only. Valid values: -# 0->3895 octets, 1->7991 octets, 2->11454 octets) -gVhtMpduLen=2 - -# WOW Enable/Disable. -# 0 - Disable both magic pattern match and pattern byte match. -# 1 - Enable magic pattern match on all interfaces. -# 2 - Enable pattern byte match on all interfaces. -# 3 - Enable both magic pattern and pattern byte match on all interfaces. -# Default value of gEnableWoW is 3. -# gEnableWoW=0 - -# Enable or Disable MCC Adaptive Scheduler at the FW -# 1=Enable (default), 0=Disable -gEnableMCCAdaptiveScheduler=1 - -#Enable or Disable p2p device address administered -isP2pDeviceAddrAdministrated=0 - -# Set Thermal Power limit -TxPower2g=10 -TxPower5g=10 - -# Remove Overlap channel restriction -gEnableOverLapCh=0 - -#Enable VHT on 2.4Ghz -gEnableVhtFor24GHzBand=1 - -#Maximum number of offload peers supported -# gMaxOffloadPeers=2 - -# controlling the following offload patterns -# through ini parameter. Default value is 1 -# to disable set it to zero. ssdp = 0 -# Setup multicast pattern for mDNS 224.0.0.251, -# SSDP 239.255.255.250 and LLMNR 224.0.0.252 -ssdp=0 - -#Enable Memory Deep Sleep -gEnableMemDeepSleep=1 - -# RA filtering rate limit param, the current value would not -# help if the lifetime in RA is less than 3*60=3min. Then -# we need to change it, though it is uncommon. -# gRAFilterEnable=0 -gRArateLimitInterval=600 - -# Maximum number of concurrent connections -gMaxConcurrentActiveSessions=3 - -# Disable/Enable GreenAP -# 0 to disable, 1 to enable, default: 1 -gEnableGreenAp=0 - -gPNOScanSupport=1 - -#Enable/Disable LPASS support -# 0 to disable, 1 to enable -gEnableLpassSupport=1 - -# Whether userspace country code setting shld have priority -gCountryCodePriority=1 - -# Enable(1)/Disable(0) SIFS burst -gEnableSifsBurst=1 - -# Enable or Disable Multi-user MIMO -# 1=Enable (default), 0=Disable -gEnableMuBformee=1 - -# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode -gIbssTxSpEndInactivityTime=10 - -# Enable support for TDLS -# 0 - disable -# 1 - enable -gEnableTDLSSupport=1 - -# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall -# initiate TDLS Discovery towards a peer whenever setup criteria (throughput -# and RSSI) is met and then will initiate teardown when teardown criteria -# (idle packet count and RSSI) is met. -# 0 - disable -# 1 - enable -gEnableTDLSImplicitTrigger=1 - -# Enable TDLS External Control. That is, user space application has to -# first configure a peer MAC in wlan driver towards which TDLS is desired. -# Device will establish TDLS only towards those configured peers whenever -# TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS -# when teardown criteria (idle packet count and RSSI) is met. However, -# device will accept TDLS connection if it is initiated from any other peer, -# even if that peer is not configured. -# 0 - disable -# 1 - enable -# For TDLS External Control, Implicit Trigger must also be enabled. -gTDLSExternalControl=1 - -# Enable support for TDLS off-channel operation -# 0 - disable -# 1 - enable -# TDLS off-channel operation will be invoked when there is only one -# TDLS connection. -gEnableTDLSOffChannel=1 - -# Enable or Disable Random MAC (Spoofing) -# 1=Enable (default), 0=Disable -gEnableMacAddrSpoof=1 - -################ Datapath feature set Begin ################ -# Bus bandwidth threshold values in terms of number of packets -gBusBandwidthHighThreshold=2000 -gBusBandwidthMediumThreshold=500 -gBusBandwidthLowThreshold=150 - -# Bus bandwidth compute timeout value in ms -gBusBandwidthComputeInterval=100 - -# VHT Tx/Rx MCS values -# Valid values are 0,1,2. If commented out, the default value is 0. -# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9 -gVhtRxMCS=2 -gVhtTxMCS=2 - -# VHT Tx/Rx MCS values for 2x2 -# Valid values are 0,1,2. If commented out, the default value is 0. -# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9 -gEnable2x2=1 -gVhtRxMCS2x2=2 -gVhtTxMCS2x2=2 - -#IPA config is a bit mask and following are the configurations. -#bit0 IPA Enable -#bit1 IPA PRE Filter enable -#bit2 IPv6 enable -#bit3 IPA Resource Manager (RM) enable -#bit4 IPA Clock scaling enable -#bit5 IPA uC ENABLE -#bit6 IPA uC STA ENABLE -#bit8 IPA Real Time Debugging -gIPAConfig=0x7d -gIPADescSize=800 - -# Enable/Disable RX full reorder offload -gReorderOffloadSupported=1 - -# Enable CE classification -# 1 - enable(default) 0 - disable -gCEClassifyEnable=1 - -# Enable Rx handling options -# Rx_thread=1 RPS=2(default for ROME) NAPI=4(default for ihelium) -# DP_RX_THREAD=16 (1 << 4) -# 20 = (DP_RX_THREAD | NAPI) -rx_mode=20 - -# Enable(Tx) fastpath for data traffic. -# 1 - enable(default) 0 - disable -gEnableFastPath=1 - -# This flag enables IP, TCP and UDP checksum offload -# 1 - enable(default) 0 - disable -gEnableIpTcpUdpChecksumOffload=1 - -# Enable TCP Segmentation Offload -# 1 - enable 0 - disable -TSOEnable=1 - -# Enable Generic Receive Offload -# 1 - enable(default) 0 - disable -GROEnable=1 - -# Enable HT MPDU Density -# 4 for 2 micro sec -ght_mpdu_density=4 - -# Enable flow steering to enable multiple CEs for Rx flows. -# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs. -# Parallel Rx paths. -# 1 - enable 0 - disable(default) -gEnableFlowSteering=1 - -# Time in microseconds after which a NAPI poll must yield -ce_service_max_yield_time=500 - -#Maximum number of HTT messages to be processed per NAPI poll -ce_service_max_rx_ind_flush=1 - -# Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND -maxMSDUsPerRxInd=8 - -# Enable NUD tracking feature -# 1 - enable 0 - disable(default) -gEnableNUDTracking=1 -################ Datapath feature set End ################ - -################ NAN feature set start ################### - -# Enable NAN discovery (NAN 1.0) -# 1 - enable 0 - disable(default) -gEnableNanSupport=1 -# Enable NAN Datapath -genable_nan_datapath=1 - -################ NAN feature set end ##################### - -adaptive_dwell_mode_enabled=1 - -hostscan_adaptive_dwell_mode=1 - -adapt_dwell_lpf_weight=80 - -adapt_dwell_wifi_act_threshold=10 - -MAWCEnabled=0 - -drop_bcn_on_chan_mismatch=0 - -# Enable/Disable rtt sta mac randomization -enable_rtt_mac_randomization=1 - -#Enable/Disable SNR monitoring -gEnableSNRMonitoring=1 - -# HTC Credit count for WMI operation -# 1 to serialize the WMI commands -# 0 default works with FW advertised credits, 2 credits usually -gWmiCreditCount=1 - -# Enable enhanced ACS -acs_with_more_param=1 -# bits 0-3: rssi weight -# bits 4-7: bss count weight -# bits 8-11: noise floor weight -# bits 12-15: channel free weight -# bits 16-19: tx power range weight -# bits 20-23: tx power throughput weight -# bits 24-31: reserved -AutoChannelSelectWeight=0x00fafafa - -# Enable/Disable broadcast TWT -bcast_twt=1 - -# Enable Runtime PM -#gRuntimePM=1 - -# Enable broadcast logging to the userspace entities -gMulticastHostFwMsgs=1 -# Disable packetlog explicitly -gEnablePacketLog=0 - -# Set IPA bandwidth levels in mbps -gIPALowBandwidthMbps=100 -gIPAMediumBandwidthMbps=400 -gIPAHighBandwidthMbps=800 -spectral_disable=1 - -END - -# Note: Configuration parser would not read anything past the END marker - diff --git a/wifi/WCNSS_qcom_cfg_setchain.ini b/wifi/WCNSS_qcom_cfg_setchain.ini deleted file mode 100644 index 46fcd8e..0000000 --- a/wifi/WCNSS_qcom_cfg_setchain.ini +++ /dev/null @@ -1,554 +0,0 @@ -# This file allows user to override the factory -# for the WLAN chain0/chain1 only - -#Below ini copied from LA.UM.0.6.3 -# ifdef VENDOR_EDIT -tx_nss_5g=0x01249249 -rx_nss_5g=0x01249249 -tx_nss_2g=0x01249249 -rx_nss_2g=0x01249249 -gInitialScanNoDFSChnl=1 -gRoamOffloadEnabled=0 -gRoamScanOffloadEnabled=0 -#gInitialDwellTime=20 -gSoftApMaxPeers=8 -gRoamBmissFirstBcnt=15 -gRoamBmissFinalBcnt=25 -gDroppedPktDisconnectTh=1024 -# Runtime is default zero in hostdriver -#gRuntimePM=0 -gRAFilterEnable=0 -gMCAddrListEnable=1 -# 0: disable feature (default) -# 1: drop all broadcast frames, except ARP -# 2: drop all multicast frames, except ICMPv6 -# 3: drop all broadcast and multicast frames, except ARP and ICMPv6 -gHwFilterMode=3 -gBpfFilterEnable=1 -#gFwDebugLogLevel=3 -#gFwDebugModuleLoglevel=2,1,3,1,5,1,9,1,13,1,14,1,18,1,19,1,26,1,28,1,29,1,31,1,36,1,38,1,46,1,47,1,50,1,52,1,53,1,56,1,60,1,61,1 -gChannelBondingMode24GHz=1 -gStaKeepAlivePeriod=30 -gper_roam_enabled=3 -gper_roam_th_percent=80 -gper_min_rssi_threshold_for_roam=70 -gItoRepeatCount=5 -gDisablePacketFilter=0 -g_enable_packet_filter_bitmap=3 -gEnableModulatedDTIM=3 -gMaxLIModulatedDTIM=6 -#gActiveModeOffload=0 -gReportMaxLinkSpeed=2 -gEnableSelfRecovery=0 -gEnableTxSUBeamformer=0 -# endif /* VENDOR_EDIT */ -fw_timeout_crash=1 - -# Phy Mode (auto, b, g, n, etc) -# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac -# 1 = 11abg, 2 = 11b, 3 = 11g, 5 = 11g only, 6 = 11n only -# 7 = 11b only 8 = 11ac only. -gDot11Mode=0 - -# UAPSD service interval for VO,VI, BE, BK traffic -InfraUapsdVoSrvIntv=0 -InfraUapsdViSrvIntv=0 -InfraUapsdBeSrvIntv=0 -InfraUapsdBkSrvIntv=0 - -# Flag to allow STA send AddTspec even when ACM is Off -gAddTSWhenACMIsOff=1 - -# ifdef VENDOR_EDIT -# Enable IMPS or not -gEnableImps=0 - -# Enable BMPS or not -gEnableBmps=0 - -#Flag to enable HostARPOffload feature or not -hostArpOffload=1 - -#Flag to enable HostNSOffload feature or not -hostNSOffload=1 -# endif /* VENDOR_EDIT */ - -# 802.11n Protection flag -gEnableApProt=1 - -#Enable OBSS protection -gEnableApOBSSProt=1 - -#Enable/Disable UAPSD for SoftAP -gEnableApUapsd=1 - -# Maximum Tx power -# gTxPowerCap=30 - -# Fragmentation Threshold -# gFragmentationThreshold=2346 - -# RTS threshold -RTSThreshold=1048576 - -# Intra-BSS forward -gDisableIntraBssFwd=0 - -# WMM Enable/Disable -WmmIsEnabled=0 - -# 802.11d support -#ifdef VENDOR_EDIT -g11dSupportEnabled=1 -#else -#g11dSupportEnabled=0 -#endif /* VENDOR_EDIT */ - -# 802.11h support -g11hSupportEnabled=1 - -# DFS Master Capability -#ifdef VENDOR_EDIT -gEnableDFSMasterCap=0 -#else -#gEnableDFSMasterCap=1 -#endif /* VENDOR_EDIT */ - -# ESE Support and fast transition -EseEnabled=0 - -ImplicitQosIsEnabled=0 - -gNeighborScanTimerPeriod=200 -gNeighborLookupThreshold=76 -gNeighborScanChannelMinTime=20 - -# Legacy (non-ESE, non-802.11r) Fast Roaming Support -# To enable, set FastRoamEnabled=1 -# To disable, set FastRoamEnabled=0 -FastRoamEnabled=1 - -# Check if the AP to which we are roaming is better than current AP in -# terms of RSSI. Checking is disabled if set to Zero.Otherwise it will -# use this value as to how better the RSSI of the new/roamable AP should -# be for roaming -RoamRssiDiff=5 - -# To enable, set gRoamIntraBand=1 (Roaming within band) -# To disable, set gRoamIntraBand=0 (Roaming across band) -gRoamIntraBand=0 - -#Short Guard Interval Enable/disable -gShortGI20Mhz=1 -gShortGI40Mhz=1 - -#Preferred band (both or 2.4 only or 5 only) -BandCapability=0 - -#Channel Bonding -gChannelBondingMode5GHz=1 - -#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds). -#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link -#is idle for last 10 seconds.) For both active and power save clients. - -#Power save clients: DUT set TIM bit from 10th second onwards and till client -#honors TIM bit. If doesn't honor for 5 seconds then DUT remove client. - -#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not -#success still we try on 11th second if not tries on 12th and so on till 15th -#second. Hence before disconnection DUT will send 5 NULL frames. Hence in any -#case DUT will detect client got removed in (10+5) seconds. -#i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod).. - -#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and -#it is period where we send NULL frame. -#gApLinkMonitorPeriod = 10 -#gGoLinkMonitorPeriod = 10 - -#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame -#are succeed to send or not. Hence total effective detection time is -# (gGoLinkMonitorPeriod + gGoKeepAlivePeriod) / -# (gApLinkMonitorPeriod + gApKeepAlivePeriod) -gGoKeepAlivePeriod = 20 -#ifdef VENDOR_EDIT -gApKeepAlivePeriod = 20 -#endif /* VENDOR_EDIT */ - -#If set to 0, will not scan DFS channels -gEnableDFSChnlScan=1 - -# Enable DFS channel roam -# 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE -gAllowDFSChannelRoam=1 - -gVhtChannelWidth=2 - -#ifdef VENDOR_EDIT -#Data Inactivity Timeout when in powersave (in ms) -gDataInactivityTimeout=200 -#endif /* VENDOR_EDIT */ - -# Set txchainmask and rxchainmask -# These parameters are used only if gEnable2x2 is 0 -# Valid values are 1,2 -# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0. -# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1. -gSetTxChainmask1x1=1 -gSetRxChainmask1x1=1 - -# Scan Timing Parameters -# gPassiveMaxChannelTime=110 -#ifdef VENDOR_EDIT -gActiveMaxChannelTime=60 -gActiveMinChannelTime=40 -#else -#gActiveMaxChannelTime=40 -#gActiveMinChannelTime=20 -#endif /* VENDOR_EDIT */ - -#If set to 0, MCC is not allowed. -gEnableMCCMode=1 - -# MCC to SCC Switch mode: -# 0-Disable -# 1-Enable -# 2-Force SCC if same band, with SAP restart -# 3-Force SCC if same band, without SAP restart by sending (E)CSA -# 4-Force SCC if same band (or) use SAP mandatory channel for DBS, -# without SAP restart by sending (E)CSA -gWlanMccToSccSwitchMode = 3 - -# 1=enable STBC; 0=disable STBC -gEnableRXSTBC=1 - -# 1=enable tx STBC; 0=disable -gEnableTXSTBC=1 - -# 1=enable rx LDPC; 0=disable -gEnableRXLDPC=1 - -#Enable/Disable Tx beamforming -gTxBFEnable=1 - -#Enable/Disable Tx beamformee in SAP mode -gEnableTxBFeeSAP=1 - -# Enable Tx beamforming in VHT20MHz -# Valid values are 0,1. If commented out, the default value is 0. -# 0=disable, 1=enable -gEnableTxBFin20MHz=1 - -#Enable/Disable SU Tx beamformer support -#gEnableTxSUBeamformer=1 - -gEnableFastRoamInConcurrency=1 - -# 802.11K support -gRrmEnable=1 - -#ifdef VENDOR_EDIT -#Enable Power Save offload -gEnablePowerSaveOffload=1 -#else -#gEnablePowerSaveOffload=2 - -#Enable firmware uart print -gEnablefwprint=0 -#endif VENDOR_EDIT - -# Firmware log mode -# Valid values are 0,1,2 -# 0=Disable, 1=WMI, 2=DIAG -gEnablefwlog=1 - -# Maximum Receive AMPDU size (VHT only. Valid values: -# 0->8k 1->16k 2->32k 3->64k 4->128k) -gVhtAmpduLenExponent=7 - -# Maximum MPDU length (VHT only. Valid values: -# 0->3895 octets, 1->7991 octets, 2->11454 octets) -gVhtMpduLen=2 - -# WOW Enable/Disable. -# 0 - Disable both magic pattern match and pattern byte match. -# 1 - Enable magic pattern match on all interfaces. -# 2 - Enable pattern byte match on all interfaces. -# 3 - Enable both magic pattern and pattern byte match on all interfaces. -# Default value of gEnableWoW is 3. -# gEnableWoW=0 - -# Enable or Disable MCC Adaptive Scheduler at the FW -# 1=Enable (default), 0=Disable -gEnableMCCAdaptiveScheduler=1 - -#Enable or Disable p2p device address administered -isP2pDeviceAddrAdministrated=0 - -# Set Thermal Power limit -TxPower2g=10 -TxPower5g=10 - -# Remove Overlap channel restriction -gEnableOverLapCh=0 - -#Enable VHT on 2.4Ghz -gEnableVhtFor24GHzBand=1 - -#Maximum number of offload peers supported -# gMaxOffloadPeers=2 - -# controlling the following offload patterns -# through ini parameter. Default value is 1 -# to disable set it to zero. ssdp = 0 -# Setup multicast pattern for mDNS 224.0.0.251, -# SSDP 239.255.255.250 and LLMNR 224.0.0.252 -ssdp=0 - -#Enable Memory Deep Sleep -gEnableMemDeepSleep=1 - -# RA filtering rate limit param, the current value would not -# help if the lifetime in RA is less than 3*60=3min. Then -# we need to change it, though it is uncommon. -# gRAFilterEnable=0 -gRArateLimitInterval=600 - -# Maximum number of concurrent connections -gMaxConcurrentActiveSessions=3 - -# Disable/Enable GreenAP -# 0 to disable, 1 to enable, default: 1 -gEnableGreenAp=0 - -gPNOScanSupport=1 - -#Enable/Disable LPASS support -# 0 to disable, 1 to enable -gEnableLpassSupport=1 - -# Whether userspace country code setting shld have priority -gCountryCodePriority=1 - -# Enable(1)/Disable(0) SIFS burst -#ifdef VENDOR_EDIT -#Min: 0 disabled -#Max: 3 enabled802.11g -#Default: 1 enabled, but disabled for legacy mode -gEnableSifsBurst=3 -#else -# gEnableSifsBurst=1 -# endif /* VENDOR_EDIT */ - -# Enable or Disable Multi-user MIMO -# 1=Enable (default), 0=Disable -gEnableMuBformee=1 - -# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode -gIbssTxSpEndInactivityTime=10 - -# Enable support for TDLS -# 0 - disable -# 1 - enable -gEnableTDLSSupport=1 - -# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall -# initiate TDLS Discovery towards a peer whenever setup criteria (throughput -# and RSSI) is met and then will initiate teardown when teardown criteria -# (idle packet count and RSSI) is met. -# 0 - disable -# 1 - enable -gEnableTDLSImplicitTrigger=1 - -# Enable TDLS External Control. That is, user space application has to -# first configure a peer MAC in wlan driver towards which TDLS is desired. -# Device will establish TDLS only towards those configured peers whenever -# TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS -# when teardown criteria (idle packet count and RSSI) is met. However, -# device will accept TDLS connection if it is initiated from any other peer, -# even if that peer is not configured. -# 0 - disable -# 1 - enable -# For TDLS External Control, Implicit Trigger must also be enabled. -gTDLSExternalControl=1 - -# Enable support for TDLS off-channel operation -# 0 - disable -# 1 - enable -# TDLS off-channel operation will be invoked when there is only one -# TDLS connection. -gEnableTDLSOffChannel=1 - -# Enable or Disable Random MAC (Spoofing) -# 1=Enable (default), 0=Disable -gEnableMacAddrSpoof=1 - -################ Datapath feature set Begin ################ -# Bus bandwidth threshold values in terms of number of packets -gBusBandwidthHighThreshold=2000 -gBusBandwidthMediumThreshold=500 -gBusBandwidthLowThreshold=150 - -# Bus bandwidth compute timeout value in ms -gBusBandwidthComputeInterval=100 - -# VHT Tx/Rx MCS values -# Valid values are 0,1,2. If commented out, the default value is 0. -# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9 -gVhtRxMCS=2 -gVhtTxMCS=2 - -# VHT Tx/Rx MCS values for 2x2 -# Valid values are 0,1,2. If commented out, the default value is 0. -# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9 -gEnable2x2=1 -gVhtRxMCS2x2=2 -gVhtTxMCS2x2=2 - -#IPA config is a bit mask and following are the configurations. -#bit0 IPA Enable -#bit1 IPA PRE Filter enable -#bit2 IPv6 enable -#bit3 IPA Resource Manager (RM) enable -#bit4 IPA Clock scaling enable -#bit5 IPA uC ENABLE -#bit6 IPA uC STA ENABLE -#bit8 IPA Real Time Debugging -gIPAConfig=0x7d -gIPADescSize=800 - -# Enable/Disable RX full reorder offload -gReorderOffloadSupported=1 - -# Enable CE classification -# 1 - enable(default) 0 - disable -gCEClassifyEnable=1 - -# Enable Rx handling options -# Rx_thread=1 RPS=2(default for ROME) NAPI=4(default for ihelium) -# DP_RX_THREAD=16 (1 << 4) -# 20 = (DP_RX_THREAD | NAPI) -rx_mode=20 - -# Enable(Tx) fastpath for data traffic. -# 1 - enable(default) 0 - disable -gEnableFastPath=1 - -# This flag enables IP, TCP and UDP checksum offload -# 1 - enable(default) 0 - disable -gEnableIpTcpUdpChecksumOffload=1 - -# Enable TCP Segmentation Offload -# 1 - enable 0 - disable -TSOEnable=1 - -# Enable Generic Receive Offload -# 1 - enable(default) 0 - disable -GROEnable=1 - -# Enable HT MPDU Density -# 4 for 2 micro sec -ght_mpdu_density=4 - -# Enable flow steering to enable multiple CEs for Rx flows. -# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs. -# Parallel Rx paths. -# 1 - enable 0 - disable(default) -gEnableFlowSteering=1 - -# Time in microseconds after which a NAPI poll must yield -ce_service_max_yield_time=500 - -#Maximum number of HTT messages to be processed per NAPI poll -ce_service_max_rx_ind_flush=1 - -# Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND -maxMSDUsPerRxInd=8 - -# Enable NUD tracking feature -# 1 - enable 0 - disable(default) -#ifndef VENDOR_EDIT -# richy.li@Connectivity, 2019/10/11, [Q porting] align the vowifi behavior with 18811. -#gEnableNUDTracking=1 -#else -gEnableNUDTracking=0 -#endif /* VENDOR_EDIT */ -################ Datapath feature set End ################ - -################ NAN feature set start ################### - -# Enable NAN discovery (NAN 1.0) -# 1 - enable 0 - disable(default) -gEnableNanSupport=1 -# Enable NAN Datapath -genable_nan_datapath=1 - -################ NAN feature set end ##################### - -#ifdef VENDOR_EDIT -adaptive_dwell_mode_enabled=0 -#else -#adaptive_dwell_mode_enabled=1 -#endif /* VENDOR_EDIT */ - -hostscan_adaptive_dwell_mode=1 - -adapt_dwell_lpf_weight=80 - -adapt_dwell_wifi_act_threshold=10 - -MAWCEnabled=0 - -drop_bcn_on_chan_mismatch=0 - -# Enable/Disable rtt sta mac randomization -enable_rtt_mac_randomization=1 - -#Enable/Disable SNR monitoring -gEnableSNRMonitoring=1 - -# HTC Credit count for WMI operation -# 1 to serialize the WMI commands -# 0 default works with FW advertised credits, 2 credits usually -gWmiCreditCount=1 - -# Enable enhanced ACS -acs_with_more_param=1 -# bits 0-3: rssi weight -# bits 4-7: bss count weight -# bits 8-11: noise floor weight -# bits 12-15: channel free weight -# bits 16-19: tx power range weight -# bits 20-23: tx power throughput weight -# bits 24-31: reserved -AutoChannelSelectWeight=0x00fafafa - -# Enable/Disable broadcast TWT -bcast_twt=1 - -# Enable Runtime PM -#gRuntimePM=1 - -# Enable broadcast logging to the userspace entities -gMulticastHostFwMsgs=1 -# Disable packetlog explicitly -#ifndef VENDOR_EDIT -#gEnablePacketLog=0 -#else -global_adapt_dwelltime_mode=1 -roamscan_adaptive_dwell_mode=1 -extscan_adaptive_dwell_mode=1 -pnoscan_adaptive_dwell_mode=1 -active_max_channel_time_2g=60 -#endif /* VENDOR_EDIT */ - -# Set IPA bandwidth levels in mbps -gIPALowBandwidthMbps=100 -gIPAMediumBandwidthMbps=400 -gIPAHighBandwidthMbps=800 -spectral_disable=1 - -END - -# Note: Configuration parser would not read anything past the END marker -