Rtwo/kernel/motorola/sm8550-devicetrees/qcom/kalama-pmic-overlay.dtsi

559 lines
11 KiB
Text
Raw Permalink Normal View History

2025-09-30 20:22:48 -04:00
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/iio/qcom,spmi-adc5-gen3-smb139x.h>
#include "pm8550.dtsi"
#include "pm8550b.dtsi"
#include "pm8550ve.dtsi"
#include "pm8550vs.dtsi"
#include "pmk8550.dtsi"
#include "pmr735d.dtsi"
&pm8550vs_d {
status = "ok";
};
&pm8550vs_e {
status = "ok";
};
&pm8550vs_g {
status = "ok";
};
&pm8550vs_d_temp_alarm {
status = "ok";
};
&pm8550vs_e_temp_alarm {
status = "ok";
};
&pm8550vs_g_temp_alarm {
status = "ok";
};
&spmi_bus {
#address-cells = <2>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
pm8010_m: qcom,pm8010@c {
compatible = "qcom,spmi-pmic";
reg = <0xc SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pm8010m_tz: pm8010-m-temp-alarm@2400 {
compatible = "qcom,spmi-temp-alarm";
reg = <0x2400>;
interrupts = <0xc 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
};
pm8010_n: qcom,pm8010@d {
compatible = "qcom,spmi-pmic";
reg = <0xd SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pm8010n_tz: pm8010-n-temp-alarm@2400 {
compatible = "qcom,spmi-temp-alarm";
reg = <0x2400>;
interrupts = <0xd 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
};
};
&pm8550_gpios {
key_vol_up {
key_vol_up_default: key_vol_up_default {
pins = "gpio6";
function = "normal";
input-enable;
bias-pull-up;
power-source = <1>;
};
};
sd_card_det {
sd_card_det_default: sd_card_det_default {
pins = "gpio12";
function = "normal";
input-enable;
output-disable;
bias-pull-up;
power-source = <1>; /* 1.8 V */
};
};
};
&pmk8550_gpios {
pinctrl-0 = <&alt_sleep_clk_default>;
pinctrl-names = "default";
alt_sleep_clk {
alt_sleep_clk_default: alt_sleep_clk_default {
pins = "gpio3";
function = "func1";
input-disable;
output-enable;
bias-disable;
power-source = <0>;
};
};
};
&pm8550vs_d_gpios {
eusb2_repeater_reset {
eusb2_repeater_reset_default: eusb2_repeater_reset_default {
pins = "gpio4";
function = "normal";
input-enable;
output-enable;
bias-disable;
power-source = <1>; /* 1.8V */
qcom,drive-strength = <2>;
};
};
};
&pm8550_tz {
io-channels = <&pmk8550_vadc PM8550_ADC5_GEN3_DIE_TEMP>;
io-channel-names = "thermal";
};
&pm8550b_tz {
io-channels = <&pmk8550_vadc PM8550B_ADC5_GEN3_DIE_TEMP>;
io-channel-names = "thermal";
};
&pm8550b_lite_tz {
io-channels = <&pmk8550_vadc PM8550B_ADC5_GEN3_TEMP_ALARM_LITE>;
io-channel-names = "thermal";
};
&pm8550vs_c_tz {
io-channels = <&pmk8550_vadc PM8550VS_C_ADC5_GEN3_DIE_TEMP>;
io-channel-names = "thermal";
};
&pm8550vs_d_tz {
io-channels = <&pmk8550_vadc PM8550VS_D_ADC5_GEN3_DIE_TEMP>;
io-channel-names = "thermal";
};
&pm8550vs_e_tz {
io-channels = <&pmk8550_vadc PM8550VS_E_ADC5_GEN3_DIE_TEMP>;
io-channel-names = "thermal";
};
&pm8550vs_g_tz {
io-channels = <&pmk8550_vadc PM8550VS_G_ADC5_GEN3_DIE_TEMP>;
io-channel-names = "thermal";
};
&pm8550ve_f_tz {
io-channels = <&pmk8550_vadc PM8550VE_ADC5_GEN3_DIE_TEMP>;
io-channel-names = "thermal";
};
&pmk8550_vadc {
pm8550_msm_therm {
reg = <PM8550_ADC5_GEN3_AMUX_THM1_100K_PU>;
label = "pm8550_msm_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
qcom,adc-tm-type = <1>;
};
pm8550_cam_flash_therm {
reg = <PM8550_ADC5_GEN3_AMUX_THM2_100K_PU>;
label = "pm8550_cam_flash_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
qcom,adc-tm-type = <1>;
};
pm8550_wlan_therm {
reg = <PM8550_ADC5_GEN3_AMUX_THM3_100K_PU>;
label = "pm8550_wlan_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
qcom,adc-tm-type = <1>;
};
pm8550_pa_therm_1 {
reg = <PM8550_ADC5_GEN3_AMUX_THM4_100K_PU>;
label = "pm8550_pa_therm_1";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
qcom,adc-tm-type = <1>;
};
pm8550_rear_tof_therm {
reg = <PM8550_ADC5_GEN3_AMUX_THM5_100K_PU>;
label = "pm8550_rear_tof_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
qcom,adc-tm-type = <1>;
};
pm8550b_usb_therm {
reg = <PM8550B_ADC5_GEN3_AMUX_THM4_USB_THERM_100K_PU>;
label = "pm8550b_usb_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
qcom,adc-tm-type = <1>;
};
pm8550b_wls_therm {
reg = <PM8550B_ADC5_GEN3_AMUX_THM6_GPIO10_100K_PU>;
label = "pm8550b_wls_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
qcom,adc-tm-type = <1>;
};
pm8550b_chg_temp {
reg = <PM8550B_ADC5_GEN3_CHG_TEMP>;
label = "pm8550b_chg_temp";
};
pm8550b_iin_fb {
reg = <PM8550B_ADC5_GEN3_IIN_FB>;
label = "pm8550b_iin_fb";
};
pm8550b_ichg_fb {
reg = <PM8550B_ADC5_GEN3_ICHG_FB>;
label = "pm8550b_ichg_fb";
};
smb139x_1_smb_temp {
reg = <SMB1394_1_ADC5_GEN3_SMB_TEMP>;
label = "smb139x_1_smb_temp";
};
smb139x_1_iin_smb {
reg = <SMB1394_1_ADC5_GEN3_IIN_SMB>;
label = "smb139x_1_iin_smb";
};
smb139x_1_ichg_smb {
reg = <SMB1394_1_ADC5_GEN3_ICHG_SMB>;
label = "smb139x_1_ichg_smb";
};
smb139x_2_smb_temp {
reg = <SMB1394_2_ADC5_GEN3_SMB_TEMP>;
label = "smb139x_2_smb_temp";
};
smb139x_2_iin_smb {
reg = <SMB1394_2_ADC5_GEN3_IIN_SMB>;
label = "smb139x_2_iin_smb";
};
smb139x_2_ichg_smb {
reg = <SMB1394_2_ADC5_GEN3_ICHG_SMB>;
label = "smb139x_2_ichg_smb";
};
};
&thermal_zones {
pm8010m_tz {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&pm8010m_tz>;
trips {
trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "passive";
};
trip2 {
temperature = <145000>;
hysteresis = <0>;
type = "critical";
};
};
};
pm8010n_tz {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&pm8010n_tz>;
trips {
trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "passive";
};
trip2 {
temperature = <145000>;
hysteresis = <0>;
type = "critical";
};
};
};
skin-msm-therm {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pmk8550_vadc PM8550_ADC5_GEN3_AMUX_THM1_100K_PU>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
active-config1 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
cam-flash-therm {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pmk8550_vadc PM8550_ADC5_GEN3_AMUX_THM2_100K_PU>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
active-config1 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
wlan-therm {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pmk8550_vadc PM8550_ADC5_GEN3_AMUX_THM3_100K_PU>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
active-config1 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
pa-therm-1 {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pmk8550_vadc PM8550_ADC5_GEN3_AMUX_THM4_100K_PU>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
active-config1 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
rear-tof-therm {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pmk8550_vadc PM8550_ADC5_GEN3_AMUX_THM5_100K_PU>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
active-config1 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
usb-therm {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pmk8550_vadc PM8550B_ADC5_GEN3_AMUX_THM4_USB_THERM_100K_PU>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
active-config1 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
wls-therm {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pmk8550_vadc PM8550B_ADC5_GEN3_AMUX_THM6_GPIO10_100K_PU>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
active-config1 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
xo-therm {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pmk8550_vadc PMK8550_ADC5_GEN3_AMUX_THM1_XO_THERM_100K_PU>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
active-config1 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
xo_config0: xo-config0 {
temperature = <78000>;
hysteresis = <8000>;
type = "passive";
};
xo_config1: xo-config1 {
temperature = <80000>;
hysteresis = <10000>;
type = "passive";
};
display_test_config1: display-test-config1 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
display_test_config2: display-test-config2 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
display_test_config3: display-test-config3 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
display_test_config4: display-test-config4 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
};
&pm8550b_eusb2_repeater {
vdd18-supply = <&pm_humu_l15>;
vdd3-supply = <&pm_humu_l5>;
};
&pm8550b_haptics {
nvmem-names = "hap_cfg_sdam";
nvmem = <&pmk8550_sdam_46>;
};
&soc {
reboot_reason {
compatible = "qcom,reboot-reason";
nvmem-cells = <&restart_reason>;
nvmem-cell-names = "restart_reason";
};
DBO3: regulator-dbo3 {
compatible = "qti-regulator-fixed";
regulator-name = "dbo3";
regulator-min-microvolt = <3600000>;
regulator-max-microvolt = <3600000>;
gpio = <&pm8550_gpios 9 GPIO_ACTIVE_HIGH>;
regulator-enable-ramp-delay = <1500>;
enable-active-high;
};
pmic-pon-log {
compatible = "qcom,pmic-pon-log";
nvmem = <&pmk8550_sdam_5>, <&pmk8550_sdam_6>;
nvmem-names = "pon_log0", "pon_log1";
};
regulator_ocp_notifier: regulator-ocp-notifier {
compatible = "qcom,regulator-ocp-notifier";
interrupt-parent = <&spmi_bus>;
interrupts = <0x0 0x71 0x1 IRQ_TYPE_EDGE_RISING>;
nvmem-cells = <&ocp_log>;
nvmem-cell-names = "ocp_log";
};
};