Rtwo/kernel/motorola/sm8550-devicetrees/qcom/kalamap-aim300.dtsi

841 lines
17 KiB
Text
Raw Permalink Normal View History

2025-09-30 20:22:48 -04:00
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/clock/qcom,gcc-kalama.h>
#include <dt-bindings/phy/qcom,usb3-4nm-qmp-combo.h>
#include "kalama-pmic-overlay.dtsi"
#include "kalama-thermal-overlay.dtsi"
&sdhc_2 {
status = "ok";
vdd-supply = <&pm_humu_l9>;
qcom,vdd-voltage-level = <2950000 2960000>;
qcom,vdd-current-level = <0 800000>;
vdd-io-supply = <&pm_humu_l8>;
qcom,vdd-io-voltage-level = <1800000 2960000>;
qcom,vdd-io-current-level = <0 5600>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc2_on>, <&sd_card_det_default>;
pinctrl-1 = <&sdc2_off>, <&sd_card_det_default>;
cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_HIGH>;
resets = <&gcc GCC_SDCC2_BCR>;
reset-names = "core_reset";
qcom,iommu-dma = "fastmap";
qcom,uses_level_shifter;
};
&soc {
gpio_key {
compatible = "gpio-keys";
label = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&key_vol_up_default>;
vol_up {
label = "volume_up";
gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEUP>;
gpio-key,wakeup;
debounce-interval = <15>;
linux,can-disable;
};
};
clk40M: can_clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <40000000>;
};
bob_3p3: bob3v3_vreg {
compatible = "regulator-fixed";
regulator-name = "bob_3p3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
vin-supply = <&L15B>;
};
vdc_5v: vdc5v_vreg {
compatible = "regulator-fixed";
regulator-name = "vdc_5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
vin-supply = <&bob_3p3>;
};
qps615_bridge_0p9_vreg: qps615_bridge_0p9_vreg {
compatible = "regulator-fixed";
regulator-name = "qps615_bridge_0p9_vreg";
gpio = <&tlmm 178 GPIO_ACTIVE_HIGH>;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
enable-active-high;
regulator-enable-ramp-delay = <4300>;
};
};
&qupv3_se8_spi {
status = "ok";
can@0 {
compatible = "microchip,mcp2518fd";
reg = <0>;
clocks = <&clk40M>;
interrupts-extended = <&tlmm 10 IRQ_TYPE_LEVEL_LOW>;
interrupt-names = "can_irq";
spi-max-frequency = <10000000>;
gpio-controller;
vdd-supply = <&vdc_5v>;
xceiver-supply = <&vdc_5v>;
status = "ok";
};
};
&pm8550b_haptics {
qcom,vmax-mv = <1300>;
qcom,lra-period-us = <5880>;
status = "ok";
effect_0 {
/* CLICK */
qcom,wf-vmax-mv = <1800>;
qcom,wf-pattern-period-us = <5880>;
};
effect_1 {
/* DOUBLE_CLICK */
qcom,wf-vmax-mv = <1800>;
qcom,wf-pattern-period-us = <5880>;
};
effect_2 {
/* TICK */
qcom,wf-vmax-mv = <1800>;
qcom,wf-pattern-period-us = <5880>;
};
effect_3 {
/* THUD */
qcom,wf-vmax-mv = <1800>;
qcom,wf-pattern-period-us = <5880>;
};
effect_4 {
/* POP */
qcom,wf-vmax-mv = <1800>;
qcom,wf-pattern-period-us = <5880>;
};
effect_5 {
/* HEAVY CLICK */
qcom,wf-vmax-mv = <1800>;
qcom,wf-pattern-period-us = <5880>;
};
primitive_0 {
/* NOOP */
qcom,wf-vmax-mv = <2400>;
qcom,wf-pattern-period-us = <5880>;
};
primitive_1 {
/* CLICK */
qcom,wf-vmax-mv = <2400>;
qcom,wf-pattern-period-us = <5880>;
};
primitive_2 {
/* THUD */
qcom,wf-vmax-mv = <2400>;
qcom,wf-pattern-period-us = <5880>;
};
primitive_3 {
/* SPIN */
qcom,wf-vmax-mv = <2400>;
qcom,wf-pattern-period-us = <5880>;
};
primitive_4 {
/* QUICK_RISE */
qcom,wf-vmax-mv = <2400>;
qcom,wf-pattern-period-us = <5880>;
};
primitive_5 {
/* SLOW_RISE */
qcom,wf-vmax-mv = <2400>;
qcom,wf-pattern-period-us = <5880>;
};
primitive_6 {
/* QUICK_FALL */
qcom,wf-vmax-mv = <2400>;
qcom,wf-pattern-period-us = <5880>;
};
primitive_7 {
/* LIGHT_TICK */
qcom,wf-vmax-mv = <2400>;
qcom,wf-pattern-period-us = <5880>;
};
primitive_8 {
/* LOW_TICK */
qcom,wf-vmax-mv = <2400>;
qcom,wf-pattern-period-us = <5880>;
};
};
&ufsphy_mem {
compatible = "qcom,ufs-phy-qmp-v4-kalama";
/* VDDA_UFS_CORE */
vdda-phy-supply = <&pm_v6d_l1>;
vdda-phy-max-microamp = <188000>;
/* VDDA_UFS_0_1P2 */
vdda-pll-supply = <&pm_v6e_l3>;
vdda-pll-max-microamp = <18300>;
/* Phy GDSC for VDD_MX, always on */
vdd-phy-gdsc-supply = <&gcc_ufs_mem_phy_gdsc>;
/* Qref power supply, Refer Qref diagram */
vdda-qref-supply = <&pm_v6e_l1>;
vdda-qref-max-microamp = <30000>;
status = "ok";
};
&ufshc_mem {
vdd-hba-supply = <&gcc_ufs_phy_gdsc>;
vcc-supply = <&pm_humu_l17>;
vcc-max-microamp = <1300000>;
vccq-supply = <&pm_v6g_l1>;
vccq-max-microamp = <1200000>;
/* VDD_PX10 is voted for the ufs_reset_n */
qcom,vddp-ref-clk-supply = <&pm_v6g_l3>;
qcom,vddp-ref-clk-max-microamp = <100>;
qcom,vccq-parent-supply = <&pm_v6g_s4>;
qcom,vccq-parent-max-microamp = <210000>;
reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
resets = <&gcc GCC_UFS_PHY_BCR>;
reset-names = "rst";
status = "ok";
};
&pm8550_switch0 {
qcom,led-mask = <9>; /* Channels 1 & 4 */
qcom,symmetry-en;
};
&pm8550_switch1 {
qcom,led-mask = <6>; /* Channels 2 & 3 */
qcom,symmetry-en;
};
&pm8550_switch2 {
qcom,led-mask = <15>; /* All Channels */
qcom,symmetry-en;
};
&pm8550_flash {
status = "ok";
};
&qupv3_se4_spi {
#address-cells = <1>;
#size-cells = <0>;
status = "ok";
qcom,touch-active = "goodix,gt9916S";
qcom,la-vm;
goodix-berlin@0 {
compatible = "goodix,gt9916S";
reg = <0>;
spi-max-frequency = <1000000>;
goodix,avdd-name = "avdd";
avdd-supply = <&L14B>;
interrupt-parent = <&tlmm>;
interrupts = <25 0x2008>;
goodix,reset-gpio = <&tlmm 24 0x00>;
goodix,irq-gpio = <&tlmm 25 0x2008>;
goodix,irq-flags = <2>;
goodix,panel-max-x = <1080>;
goodix,panel-max-y = <2400>;
goodix,panel-max-w = <255>;
goodix,panel-max-p = <4096>;
goodix,firmware-name = "goodix_firmware_spi.bin";
goodix,config-name = "goodix_cfg_group_spi.bin";
pinctrl-names = "pmx_ts_active", "pmx_ts_suspend", "pmx_ts_release";
pinctrl-0 = <&ts_active>;
pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
pinctrl-2 = <&ts_release>;
goodix,touch-type = "primary";
goodix,qts_en;
qts,trusted-touch-mode = "vm_mode";
qts,touch-environment = "pvm";
qts,trusted-touch-type = "primary";
qts,trusted-touch-spi-irq = <569>;
qts,trusted-touch-io-bases = <0xa90000 0xac0000>;
qts,trusted-touch-io-sizes = <0x1000 0x1000>;
qts,trusted-touch-vm-gpio-list = <&tlmm 44 0 &tlmm 45 0 &tlmm 46 0
&tlmm 47 0 &tlmm 24 0 &tlmm 25 0x2008>;
};
};
&usb_qmp_dp_phy {
pinctrl-names = "unused";
qcom,qmp-phy-override-seq =
/* <reg_offset, value> */
<USB3_DP_QSERDES_RXA_RX_MODE_00_HIGH4 0xEE
USB3_DP_QSERDES_RXA_RX_MODE_01_HIGH4 0x0D
USB3_DP_QSERDES_RXB_RX_MODE_00_LOW 0x3F
USB3_DP_QSERDES_RXB_RX_MODE_01_HIGH4 0x0E>;
};
&qupv3_hub_i2c2 {
status = "ok";
#address-cells = <1>;
#size-cells = <0>;
redriver: redriver@1c {
compatible = "onnn,redriver";
reg = <0x1c>;
pinctrl-names = "default";
pinctrl-0 = <&usb3phy_portselect_gpio>;
gpios = <&tlmm 11 0>;
eq = /bits/ 8 <
/* Parameters for USB */
0x4 0x4 0x4 0x4
/* Parameters for DP */
0x6 0x4 0x4 0x6>;
flat-gain = /bits/ 8 <
/* Parameters for USB */
0x3 0x1 0x1 0x3
/* Parameters for DP */
0x2 0x1 0x1 0x2>;
output-comp = /bits/ 8 <
/* Parameters for USB */
0x3 0x3 0x3 0x3
/* Parameters for DP */
0x3 0x3 0x3 0x3>;
loss-match = /bits/ 8 <
/* Parameters for USB */
0x1 0x3 0x3 0x1
/* Parameters for DP */
0x3 0x3 0x3 0x3>;
};
pcie1_i2c_ctrl: pcie1_i2c_ctrl {
compatible = "qcom,pcie-i2c-ntn3";
rc-index = <0x1>;
reg = <0x77>;
gpio-config-reg = <0x801208>;
ep-reset-reg = <0x801210>;
ep-reset-gpio-mask = <0xc>;
version-reg = <0x800000>;
dump-regs = <0x801330 0x801350 0x801370>;
reg_update = <0x82c030 0x1
0x828000 0x3
0x82bd00 0x8
0x82c030 0x2
0x828000 0x3
0x82bd00 0x8
0x82c030 0x8
0x828000 0x1
0x82bd00 0x8
0x82c01c 0x10
0x82c030 0xf
0x828000 0xf
0x82b268 0x2>;
/*FOM for preset caluclation*/
switch_reg_update = <0x82c02c 0x00000007
0x824a10 0x00000001
0x82c030 0x00000008
0x828000 0x00000001
0x82b074 0x00000020
0x82b2bc 0x00000001>;
};
};
&usb0 {
ssusb_redriver = <&redriver>;
};
&pm8550b_eusb2_repeater {
qcom,param-override-seq =
/* <value reg_offset> */
/* Adjust HS trasmit amplitude */
<0xb 0x51
/* Squelch detection threshold */
0x3 0x54
/* Tx pre-emphasis tuning */
0x3 0x57
/* HS disconnect threshold */
0x6 0x53>;
};
&eusb2_phy0 {
dummy-supply = <&pm8550b_eusb2_repeater>;
usb-repeater = <&pm8550b_eusb2_repeater>;
};
&usb0 {
usb-role-switch;
port {
usb_port0: endpoint {
remote-endpoint = <&usb_port0_connector>;
};
};
dwc3@a600000 {
snps,usb2-gadget-lpm-disable;
};
};
&ucsi {
connector {
port {
usb_port0_connector: endpoint {
remote-endpoint = <&usb_port0>;
};
};
};
};
&battery_charger {
qcom,wireless-fw-name = "idt9418.bin";
qcom,thermal-mitigation-step = <500000>;
};
&regulator_ocp_notifier {
periph-1c1-supply = <&L1B>;
periph-1c2-supply = <&L2B>;
periph-1c5-supply = <&L5B>;
periph-1c6-supply = <&L6B>;
periph-1c7-supply = <&L7B>;
periph-1c8-supply = <&L8B>;
periph-1c9-supply = <&L9B>;
periph-1ca-supply = <&L10B>;
periph-1cb-supply = <&L11B>;
periph-1cc-supply = <&L12B>;
periph-1cd-supply = <&L13B>;
periph-1ce-supply = <&L14B>;
periph-1cf-supply = <&L15B>;
periph-1d0-supply = <&L16B>;
periph-1d1-supply = <&L17B>;
periph-2c1-supply = <&L1C>;
periph-2c3-supply = <&L3C>;
periph-3c1-supply = <&L1D>;
periph-3c2-supply = <&L2D_LEVEL>;
periph-4c1-supply = <&L1E>;
periph-4c2-supply = <&L2E>;
periph-4c3-supply = <&L3E>;
periph-5c1-supply = <&L1F>;
periph-5c2-supply = <&L2F>;
periph-5c3-supply = <&L3F>;
periph-6c1-supply = <&L1G>;
periph-6c2-supply = <&L2G>;
periph-6c3-supply = <&L3G>;
periph-ac1-supply = <&L1K>;
periph-ac2-supply = <&L2K>;
periph-ac3-supply = <&L3K>;
periph-ac4-supply = <&L4K>;
periph-ac5-supply = <&L5K>;
periph-ac6-supply = <&L6K>;
periph-ac7-supply = <&L7K>;
periph-c40-supply = <&L1M>;
periph-c41-supply = <&L2M>;
periph-c42-supply = <&L3M>;
periph-c43-supply = <&L4M>;
periph-c44-supply = <&L5M>;
periph-c45-supply = <&L6M>;
periph-c46-supply = <&L7M>;
periph-d40-supply = <&L1N>;
periph-d41-supply = <&L2N>;
periph-d42-supply = <&L3N>;
periph-d43-supply = <&L4N>;
periph-d44-supply = <&L5N>;
periph-d45-supply = <&L6N>;
periph-d46-supply = <&L7N>;
};
&pcie0 {
qcom,pcie-phy-ver = <102>;
qcom,phy-sequence = <0x0240 0x03 0x0
0x00c0 0x01 0x0
0x00cc 0x62 0x0
0x00d0 0x02 0x0
0x0060 0xf8 0x0
0x0064 0x01 0x0
0x0000 0x93 0x0
0x0004 0x01 0x0
0x00e0 0x90 0x0
0x00e4 0x82 0x0
0x00f4 0x07 0x0
0x0070 0x02 0x0
0x0010 0x02 0x0
0x0074 0x16 0x0
0x0014 0x16 0x0
0x0078 0x36 0x0
0x0018 0x36 0x0
0x0110 0x08 0x0
0x00bc 0x0a 0x0
0x0120 0x40 0x0
0x0080 0x0a 0x0
0x0084 0x1a 0x0
0x0020 0x14 0x0
0x0024 0x34 0x0
0x0088 0x41 0x0
0x0028 0x34 0x0
0x0090 0xab 0x0
0x0094 0xaa 0x0
0x0098 0x01 0x0
0x0030 0x55 0x0
0x0034 0x55 0x0
0x0038 0x01 0x0
0x0140 0x14 0x0
0x0164 0x34 0x0
0x003c 0x01 0x0
0x001c 0x04 0x0
0x0174 0x16 0x0
0x01bc 0x0f 0x0
0x0170 0xa0 0x0
0x11a4 0x38 0x0
0x10dc 0x11 0x0
0x1160 0xbf 0x0
0x1164 0xbf 0x0
0x1168 0xb7 0x0
0x116c 0xea 0x0
0x115c 0x3f 0x0
0x1174 0x5c 0x0
0x1178 0x9c 0x0
0x117c 0x1a 0x0
0x1180 0x8f 0x0
0x1170 0xdc 0x0
0x1188 0x94 0x0
0x118c 0x5b 0x0
0x1190 0x1a 0x0
0x1194 0x89 0x0
0x10cc 0x00 0x0
0x1008 0x09 0x0
0x1014 0x05 0x0
0x104c 0x08 0x0
0x1050 0x08 0x0
0x10d8 0x0f 0x0
0x1118 0x1c 0x0
0x10f8 0x07 0x0
0x11f8 0x08 0x0
0x0e84 0x15 0x0
0x0e90 0x3f 0x0
0x0ee4 0x02 0x0
0x0e40 0x06 0x0
0x0e3c 0x18 0x0
0x19a4 0x38 0x0
0x18dc 0x11 0x0
0x1960 0xbf 0x0
0x1964 0xbf 0x0
0x1968 0xb7 0x0
0x196c 0xea 0x0
0x195c 0x3f 0x0
0x1974 0x5c 0x0
0x1978 0x9c 0x0
0x197c 0x1a 0x0
0x1980 0x8f 0x0
0x1970 0xdc 0x0
0x1988 0x94 0x0
0x198c 0x5b 0x0
0x1990 0x1a 0x0
0x1994 0x89 0x0
0x18cc 0x00 0x0
0x1808 0x09 0x0
0x1814 0x05 0x0
0x184c 0x08 0x0
0x1850 0x08 0x0
0x18d8 0x0f 0x0
0x1918 0x1c 0x0
0x18f8 0x07 0x0
0x19f8 0x08 0x0
0x1684 0x15 0x0
0x1690 0x3f 0x0
0x16e4 0x02 0x0
0x1640 0x06 0x0
0x163c 0x18 0x0
0x02dc 0x05 0x0
0x0388 0x77 0x0
0x0398 0x0b 0x0
0x06a4 0x1e 0x0
0x03e0 0x0f 0x0
0x060c 0x1d 0x0
0x0614 0x07 0x0
0x0620 0xc1 0x0
0x0624 0x40 0x0
0x0694 0x00 0x0
0x03d0 0x8c 0x0
0x0368 0x0f 0x0
0x1424 0x00 0x0
0x1428 0x00 0x0
0x0200 0x00 0x0
0x0244 0x03 0x0>;
iommu-map = <0x0 &apps_smmu 0x1400 0x1>,
<0x100 &apps_smmu 0x1401 0x1>,
<0x208 &apps_smmu 0x1402 0x1>,
<0x210 &apps_smmu 0x1403 0x1>,
<0x218 &apps_smmu 0x1404 0x1>,
<0x300 &apps_smmu 0x1407 0x1>,
<0x400 &apps_smmu 0x1408 0x1>,
<0x500 &apps_smmu 0x140c 0x1>,
<0x501 &apps_smmu 0x140e 0x1>;
};
&pcie1_msi {
status = "ok";
};
&pcie1 {
pcie-i2c-phandle = <&qupv3_hub_i2c2>;
qcom,boot-option = <0x2>;
vreg-3p3-supply = <&qps615_bridge_0p9_vreg>;
qcom,apss-based-l1ss-sleep;
msi-parent = <&pcie1_msi>;
qcom,phy-sequence = <0x1240 0x03 0x0
0x0030 0x1d 0x0
0x0034 0x03 0x0
0x0078 0x01 0x0
0x007c 0x00 0x0
0x0080 0x51 0x0
0x00ac 0x34 0x0
0x0208 0x0c 0x0
0x020c 0x0a 0x0
0x0218 0x04 0x0
0x0220 0x16 0x0
0x0234 0x00 0x0
0x029c 0x80 0x0
0x02a0 0x7c 0x0
0x02b4 0x05 0x0
0x02e8 0x0a 0x0
0x030c 0x0d 0x0
0x0320 0x0b 0x0
0x0348 0x1c 0x0
0x0388 0x20 0x0
0x0394 0x30 0x0
0x03dc 0x09 0x0
0x03f4 0x14 0x0
0x03f8 0xb3 0x0
0x03fc 0x58 0x0
0x0400 0x9a 0x0
0x0404 0x26 0x0
0x0408 0xb6 0x0
0x040c 0xee 0x0
0x0410 0xdb 0x0
0x0414 0xdb 0x0
0x0418 0xa0 0x0
0x041c 0xdf 0x0
0x0420 0x78 0x0
0x0424 0x76 0x0
0x0428 0xff 0x0
0x0830 0x1d 0x0
0x0834 0x03 0x0
0x0878 0x01 0x0
0x087c 0x00 0x0
0x0880 0x51 0x0
0x08ac 0x34 0x0
0x0a08 0x0c 0x0
0x0a0c 0x0a 0x0
0x0a18 0x04 0x0
0x0a20 0x16 0x0
0x0a34 0x00 0x0
0x0a9c 0x80 0x0
0x0aa0 0x7c 0x0
0x0ab4 0x05 0x0
0x0ae8 0x0a 0x0
0x0b0c 0x0d 0x0
0x0b20 0x0b 0x0
0x0b48 0x1c 0x0
0x0b88 0x20 0x0
0x0b94 0x30 0x0
0x0bdc 0x09 0x0
0x0bf4 0x14 0x0
0x0bf8 0xb3 0x0
0x0bfc 0x58 0x0
0x0c00 0x9a 0x0
0x0c04 0x26 0x0
0x0c08 0xb6 0x0
0x0c0c 0xee 0x0
0x0c10 0xdb 0x0
0x0c14 0xdb 0x0
0x0c18 0xa0 0x0
0x0c1c 0xdf 0x0
0x0c20 0x78 0x0
0x0c24 0x76 0x0
0x0c28 0xff 0x0
0x0ea0 0x01 0x0
0x0eb4 0x00 0x0
0x0ec4 0x00 0x0
0x0ec8 0x1f 0x0
0x0ed4 0x12 0x0
0x0ed8 0x12 0x0
0x0edc 0xdb 0x0
0x0ee0 0x9a 0x0
0x0ee4 0x38 0x0
0x0ee8 0xb6 0x0
0x0eec 0x64 0x0
0x0ef0 0x1f 0x0
0x0ef4 0x1f 0x0
0x0ef8 0x1f 0x0
0x0efc 0x1f 0x0
0x0f00 0x1f 0x0
0x0f04 0x1f 0x0
0x0f0c 0x1f 0x0
0x0f14 0x1f 0x0
0x0f1c 0x1f 0x0
0x0f28 0x5b 0x0
0x1000 0x26 0x0
0x1004 0x03 0x0
0x1010 0x06 0x0
0x1014 0x16 0x0
0x1018 0x36 0x0
0x101c 0x04 0x0
0x1020 0x0a 0x0
0x1024 0x1a 0x0
0x1028 0x68 0x0
0x1030 0xab 0x0
0x1034 0xaa 0x0
0x1038 0x02 0x0
0x103c 0x12 0x0
0x1060 0xf8 0x0
0x1064 0x01 0x0
0x1070 0x06 0x0
0x1074 0x16 0x0
0x1078 0x36 0x0
0x107c 0x0a 0x0
0x1080 0x04 0x0
0x1084 0x0d 0x0
0x1088 0x41 0x0
0x1090 0xab 0x0
0x1094 0xaa 0x0
0x1098 0x01 0x0
0x109c 0x00 0x0
0x10bc 0x0a 0x0
0x10c0 0x01 0x0
0x10cc 0x62 0x0
0x10d0 0x02 0x0
0x10d8 0x40 0x0
0x10dc 0x14 0x0
0x10e0 0x90 0x0
0x10e4 0x82 0x0
0x10f4 0x0f 0x0
0x1110 0x08 0x0
0x1120 0x46 0x0
0x1124 0x04 0x0
0x1140 0x14 0x0
0x1164 0x34 0x0
0x1170 0xa0 0x0
0x1174 0x06 0x0
0x1184 0x88 0x0
0x1188 0x14 0x0
0x1198 0x0f 0x0
0x1378 0x2e 0x0
0x1390 0xcc 0x0
0x13f8 0x00 0x0
0x13fc 0x22 0x0
0x141c 0xc1 0x0
0x1490 0x00 0x0
0x14a0 0x16 0x0
0x1420 0x40 0x0
0x1508 0x02 0x0
0x155c 0x2e 0x0
0x157c 0x03 0x0
0x1584 0x28 0x0
0x13dc 0x04 0x0
0x13e0 0x02 0x0
0x1418 0xc0 0x0
0x140c 0x1d 0x0
0x158c 0x0f 0x0
0x15ac 0xf2 0x0
0x15c0 0xf2 0x0
0x1200 0x00 0x0
0x1244 0x03 0x0>;
iommu-map = <0x0 &apps_smmu 0x1480 0x1>,
<0x100 &apps_smmu 0x1481 0x1>,
<0x208 &apps_smmu 0x1482 0x1>,
<0x210 &apps_smmu 0x1483 0x1>,
<0x218 &apps_smmu 0x1484 0x1>,
<0x300 &apps_smmu 0x1487 0x1>,
<0x400 &apps_smmu 0x1488 0x1>,
<0x500 &apps_smmu 0x148c 0x1>,
<0x501 &apps_smmu 0x148e 0x1>;
};
&pcie1_rp {
#address-cells = <5>;
#size-cells = <0>;
/* BDF 1.0.0 */
pcie1_bus1_dev0_fn0: pcie1_bus1_dev0_fn0 {
reg = <0 0 0 0 0>;
/* BDF 2.1.0 */
pcie1_bus2_dev1_fn0: pcie1_bus2_dev1_fn0 {
reg = <0x800 0x0 0x0 0x0 0x0>;
pcie1_bus3_dev0_fn0: pcie1_bus3_dev0_fn0 {
reg = <0 0 0 0 0>;
pci-ids =
"8086:0953",
"8086:0a54",
"8086:0a55",
"8086:f1a5",
"8086:f1a5",
"1c58:0003",
"1c58:0023",
"1c5c:1327",
"1c5f:0540",
"144d:a821",
"144d:a822",
"144d:a808",
"1d1d:1f1f",
"1d1d:2807",
"1d1d:2601",
"106b:2001",
"106b:2003",
"1179:0115",
"1179:0116";
};
};
/* BDF 2.2.0 */
pcie1_bus2_dev2_fn0: pcie1_bus2_dev2_fn0 {
reg = <0x1000 0x0 0x0 0x0 0x0>;
};
/* BDF 2.3.0 */
pcie1_bus2_dev3_fn0: pcie1_bus2_dev3_fn0 {
reg = <0x1800 0x0 0x0 0x0 0x0>;
};
};
};