78 lines
2.2 KiB
Text
78 lines
2.2 KiB
Text
|
Qualcomm PM8941 PMIC Power Key
|
||
|
|
|
||
|
|
PROPERTIES
|
||
|
|
|
||
|
|
- compatible:
|
||
|
|
Usage: required
|
||
|
|
Value type: <string>
|
||
|
|
Definition: must be one of:
|
||
|
|
"qcom,pm8941-pwrkey"
|
||
|
|
"qcom,pm8941-resin"
|
||
|
|
"qcom,pmk8350-pwrkey"
|
||
|
|
"qcom,pmk8350-resin"
|
||
|
|
|
||
|
|
- reg:
|
||
|
|
Usage: required
|
||
|
|
Value type: <prop-encoded-array>
|
||
|
|
Definition: Specifies the SPMI base address for the PON (power-on)
|
||
|
|
peripheral. For PMICs that have PON peripheral (GEN3) split
|
||
|
|
into PON_HLOS and PON_PBS (e.g. PMK8350), this can hold
|
||
|
|
addresses of both PON_HLOS and PON_PBS peripherals.
|
||
|
|
In that case, the PON_PBS address needs to be specified
|
||
|
|
to facilitate software debouncing on some PMICs.
|
||
|
|
|
||
|
|
- reg-names:
|
||
|
|
Usage: optional
|
||
|
|
Value type: <stringlist>
|
||
|
|
Definition: For PON GEN1 and GEN2, it should be "pon". For PON GEN3, it
|
||
|
|
should include "pon_hlos" and optionally "pon_pbs".
|
||
|
|
|
||
|
|
- interrupts:
|
||
|
|
Usage: required
|
||
|
|
Value type: <prop-encoded-array>
|
||
|
|
Definition: key change interrupt; The format of the specifier is
|
||
|
|
defined by the binding document describing the node's
|
||
|
|
interrupt parent.
|
||
|
|
|
||
|
|
- debounce:
|
||
|
|
Usage: optional
|
||
|
|
Value type: <u32>
|
||
|
|
Definition: time in microseconds that key must be pressed or released
|
||
|
|
for state change interrupt to trigger. Note that this
|
||
|
|
property isn't meaningful for PMK8350 or other PON GEN3
|
||
|
|
PMICs.
|
||
|
|
|
||
|
|
- bias-pull-up:
|
||
|
|
Usage: optional
|
||
|
|
Value type: <empty>
|
||
|
|
Definition: presence of this property indicates that the KPDPWR_N pin
|
||
|
|
should be configured for pull up. Note that this property
|
||
|
|
isn't meaningful for PMK8350 or other PON GEN3 PMICs.
|
||
|
|
|
||
|
|
- linux,code:
|
||
|
|
Usage: optional
|
||
|
|
Value type: <u32>
|
||
|
|
Definition: The input key-code associated with the power key.
|
||
|
|
Use the linux event codes defined in
|
||
|
|
include/dt-bindings/input/linux-event-codes.h
|
||
|
|
When property is omitted KEY_POWER is assumed.
|
||
|
|
|
||
|
|
EXAMPLE
|
||
|
|
|
||
|
|
pwrkey@800 {
|
||
|
|
compatible = "qcom,pm8941-pwrkey";
|
||
|
|
reg = <0x800>;
|
||
|
|
interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
|
||
|
|
debounce = <15625>;
|
||
|
|
bias-pull-up;
|
||
|
|
linux,code = <KEY_POWER>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pwrkey@1300 {
|
||
|
|
compatible = "qcom,pmk8350-pwrkey";
|
||
|
|
reg = <0x1300>, <0x800>;
|
||
|
|
reg-names = "pon_hlos", "pon_pbs";
|
||
|
|
interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
|
||
|
|
linux,code = <KEY_POWER>;
|
||
|
|
};
|