* Qualcomm Technologies, Inc. MSM Camera VFE

Camera VFE device provides the definitions for enabling
the VFE hardware. It also provides the functions for the client
to control the VFE hardware.

=======================
Required Node Structure
=======================
The VFE device is described in one level of the device node.

======================================
First Level Node - CAM VFE device
======================================
Required properties:
- cell-index
  Usage: required
  Value type: <u32>
  Definition: Should specify the hardware index id.

- compatible
  Usage: required
  Value type: <string>
  Definition: Should specify the compatibility string for matching the

  driver. e.g. "qcom,vfe680", "qcom,vfe680_110", "qcom,vfe580", "qcom,vfe580",
  "qcom,vfe480", "qcom,vfe175", "qcom,vfe170", "qcom,vfe175_130", "qcom,vfe170_150",
  "qcom,vfe165_160", "qcom,vfe-lite680", "qcom,vfe-lite680_110", "qcom,vfe-lite580",,
  "qcom,vfe-lite580", "qcom,vfe-lite480", "qcom,vfe-lite175",
  "qcom,vfe-lite175_130" or "qcom,vfe-lite170", "qcom,vfe-lite165".

- reg-names
  Usage: required
  Value type: <string>
  Definition: Should specify the name of the register block.

- reg
  Usage: required
  Value type: <u32>
  Definition: Register values.

 - reg-cam-base
  Usage: required
  Value type: <u32>
  Definition: List of bases.

- rt-wrapper-base
  Usage: required
  Value type: u32
  Definition: Titan offset of start of the RT Wrapper.

- interrupt-names
  Usage: Required
  Value type: <string>
  Definition: Name of the interrupt.

- interrupts
  Usage: Required
  Value type: <u32>
  Definition: Interrupt associated with VFE HW.

- regulator-names
  Usage: required
  Value type: <string>
  Definition: Name of the regulator resources for VFE HW.

- xxxx-supply
  Usage: required
  Value type: <phandle>
  Definition: Regulator reference corresponding to the names listed in
	"regulator-names".

- clock-names
  Usage: required
  Value type: <string>
  Definition: List of clock names required for VFE HW.

- clocks
  Usage: required
  Value type: <phandle>
  Definition: List of clocks used for VFE HW.

- clock-rates
  Usage: required
  Value type: <u32>
  Definition: List of clocks rates.

- src-clock-name
  Usage: required
  Value type: <string>
  Definition: Source clock name.

Optional properties:
- clock-names-option
  Usage: optional
  Value type: <string>
  Definition: Optional clock names.

- clocks-option
  Usage: required if clock-names-option defined
  Value type: <phandle>
  Definition: List of optinal clocks used for VFE HW.

- clock-rates-option
  Usage: required if clock-names-option defined
  Value type: <u32>
  Definition: List of clocks rates for optional clocks.

- clock-control-debugfs
  Usage: optional
  Value type: <string>
  Definition: Enable/Disable clk rate control.

- qcom,cam-cx-ipeak:
  Usage: optional
  Value type: <phandle bit>
	phandle - phandle of CX Ipeak device node
	bit     - Every bit corresponds to a client of CX Ipeak
  Definition: CX Ipeak is a mitigation scheme which throttles camera frequency
	if all the clients are running at their respective threshold
	frequencies to limit CX peak current.
	driver in the relevant register.

- scl-clk-names:
  Usage: optional
  Value type: <string>
  Definition: Scalable clock names to identify which clocks needs to update
	along with source clock.

- cam_hw_pid:
  Usage: optional
  Value type: <u32>
  Definition: HW unique Pid values

Example:
cam_vfe0: qcom,ife0@ac62000 {
	cell-index = <0>;
	compatible = "qcom,vfe680";
	reg-names = "ife", "cam_camnoc";
	reg = <0xac62000 0xF000>,
		<0xac19000 0x9000>;
	reg-cam-base = <0x62000 0x19000>;
	rt-wrapper-base = <0x62000>;
	interrupt-names = "ife";
	interrupts = <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>;
	regulator-names = "camss", "ife0";
	camss-supply = <&cam_cc_titan_top_gdsc>;
	ife0-supply = <&cam_cc_ife_0_gdsc>;
	clock-names =
		"ife_0_ahb_src",
		"ife_0_ahb",
		"ife_clk_src",
		"ife_clk";
	clocks =
		<&clock_camcc CAM_CC_FAST_AHB_CLK_SRC>,
		<&clock_camcc CAM_CC_IFE_0_FAST_AHB_CLK>,
		<&clock_camcc CAM_CC_IFE_0_CLK_SRC>,
		<&clock_camcc CAM_CC_IFE_0_CLK>;
	clock-rates =
		<100000000 0 432000000 0>,
		<200000000 0 594000000 0>,
		<300000000 0 675000000 0>,
		<400000000 0 785000000 0>,
		<400000000 0 785000000 0>;
	clock-cntl-level = "lowsvs", "svs", "svs_l1", "nominal",
		"turbo";
	src-clock-name = "ife_clk_src";
	scl-clk-names = "ife_0_ahb";
	clock-control-debugfs = "true";
	clock-names-option =  "ife_dsp_clk";
	clocks-option = <&clock_camcc CAM_CC_IFE_0_DSP_CLK>;
	clock-rates-option = <594000000>;
	ubwc-static-cfg = <0x1026 0x1036>;
	cam_hw_pid = <16 28 20 8>;
	status = "ok";
};