#include "qcs605-lc-pmic-overlay.dtsi"

&qupv3_se9_2uart {
	status = "disabled";
};

&qupv3_se12_2uart {
	status = "ok";
};

&sdhc_1 {
	vdd-supply = <&pm660_l19>;
	qcom,vdd-voltage-level = <2960000 2960000>;
	qcom,vdd-current-level = <0 570000>;

	vdd-io-supply = <&pm660_l8>;
	qcom,vdd-io-always-on;
	qcom,vdd-io-lpm-sup;
	qcom,vdd-io-voltage-level = <1800000 1800000>;
	qcom,vdd-io-current-level = <0 325000>;

	pinctrl-names = "active", "sleep";
	pinctrl-0 = <&sdc1_clk_on  &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;

	status = "ok";
};

&tlmm {
	sdc2_cd_on: cd_on {
		mux {
			pins = "gpio116";
			function = "gpio";
		};

		config {
			pins = "gpio116";
			drive-strength = <2>;
			bias-pull-up;
			};
		};

	sdc2_cd_off: cd_off {
		mux {
			pins = "gpio116";
			function = "gpio";
		};

		config {
			pins = "gpio116";
			drive-strength = <2>;
			bias-disable;
			};
	};

	usb_det_default: usb_det_default {
		usb_id_det_default: usb_id_det_default {
			mux {
				pins = "gpio131";
				function = "gpio";
			};

			config {
				pins = "gpio131";
				drive-strength = <2>;
				bias-pull-down;
				output-enable;
			};
		};

		usb_vbus_det_default: usb_vbus_det_default {
			config {
				pins = "gpio26";
				drive-strength = <2>;
				bias-pull-up;
				input-enable;
			};
		};
	};
};

&sdhc_2 {
	/* VDD external regulator is enabled/disabled by pm660_l18 regulator */
	vdd-io-supply = <&pm660_l18>;
	qcom,vdd-io-voltage-level = <1800000 2960000>;
	qcom,vdd-io-current-level = <0 22000>;

	pinctrl-names = "active", "sleep";
	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;

	cd-gpios = <&tlmm 116 0x1>;

	status = "ok";
};

&soc {
	extcon_usb1: extcon_usb1 {
		compatible = "linux,extcon-usb-gpio";
		id-gpio = <&tlmm 26 0x1>;
		trig-gpio = <&tlmm 131 0x0>;
		gpio-names = "gpio131";

		pinctrl-names = "default";
		pinctrl-0 = <&usb_vbus_det_default &usb_id_det_default>;
	};
};

&usb0 {
	extcon = <&extcon_usb1>;
};

&cdc_pdm_gpios {
	status = "disabled";
};

&cdc_comp_gpios {
	status = "disabled";
};

&cdc_dmic_gpios {
	status = "disabled";
};

&cdc_sdw_gpios {
	status = "disabled";
};

&wsa_spkr_en1 {
	status = "disabled";
};

&wsa_spkr_en2 {
	status = "disabled";
};

&qupv3_se8_spi {
	status = "okay";
};

&wcd9xxx_intc {
	status = "okay";
};

&wdsp_mgr {
	status = "okay";
};

&wdsp_glink {
	status = "okay";
};

&slim_aud {
	status = "okay";
};

&dai_slim {
	status = "okay";
};