#include <dt-bindings/thermal/thermal_qti.h>

&soc {
	tsens0: tsens@c222000 {
		compatible = "qcom,sm6150-tsens";
		reg = <0xc222000 0x8>,
		      <0xc263000 0x1ff>;
		reg-names = "tsens_srot_physical",
			    "tsens_tm_physical";
		interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
				<GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-names = "tsens-upper-lower", "tsens-critical";
		tsens-reinit-wa;
		#thermal-sensor-cells = <1>;
	};

	qcom,cpu-pause {
		compatible = "qcom,thermal-pause";

		cpu0_pause: cpu0-pause {
			qcom,cpus = <&CPU0>;
			qcom,cdev-alias = "thermal-pause-1";
			#cooling-cells = <2>;
		};

		cpu1_pause: cpu1-pause {
			qcom,cpus = <&CPU1>;
			qcom,cdev-alias = "thermal-pause-2";
			#cooling-cells = <2>;
		};

		cpu2_pause: cpu2-pause {
			qcom,cpus = <&CPU2>;
			qcom,cdev-alias = "thermal-pause-4";
			#cooling-cells = <2>;
		};

		cpu3_pause: cpu3-pause {
			qcom,cpus = <&CPU3>;
			qcom,cdev-alias = "thermal-pause-8";
			#cooling-cells = <2>;
		};

		cpu4_pause: cpu4-pause {
			qcom,cpus = <&CPU4>;
			qcom,cdev-alias = "thermal-pause-10";
			#cooling-cells = <2>;
		};

		cpu5_pause: cpu5-pause {
			qcom,cpus = <&CPU5>;
			qcom,cdev-alias = "thermal-pause-20";
			#cooling-cells = <2>;
		};

		cpu6_pause: cpu6-pause {
			qcom,cpus = <&CPU6>;
			qcom,cdev-alias = "thermal-pause-40";
			#cooling-cells = <2>;
		};

		cpu7_pause: cpu7-pause {
			qcom,cpus = <&CPU7>;
			qcom,cdev-alias = "thermal-pause-80";
			#cooling-cells = <2>;
		};

		cpu_0_1_pause: cpu-0-1-pause {
			qcom,cpus = <&CPU0 &CPU1>;
			qcom,cdev-alias = "thermal-pause-03";
			#cooling-cells = <2>;
		};

		cpu_2_3_pause: cpu-2-3-pause {
			qcom,cpus = <&CPU2 &CPU3>;
			qcom,cdev-alias = "thermal-pause-0C";
			#cooling-cells = <2>;
		};

		cpu_4_5_pause: cpu-4-5-pause {
			qcom,cpus = <&CPU4 &CPU5>;
			qcom,cdev-alias = "thermal-pause-18";
			#cooling-cells = <2>;
		};

		/* Thermal-engine cooling devices */
		pause-cpu0 {
			qcom,cpus = <&CPU0>;
			qcom,cdev-alias = "pause-cpu0";
		};

		pause-cpu1 {
			qcom,cpus = <&CPU1>;
			qcom,cdev-alias = "pause-cpu1";
		};

		pause-cpu2 {
			qcom,cpus = <&CPU2>;
			qcom,cdev-alias = "pause-cpu2";
		};

		pause-cpu3 {
			qcom,cpus = <&CPU3>;
			qcom,cdev-alias = "pause-cpu3";
		};

		pause-cpu4 {
			qcom,cpus = <&CPU4>;
			qcom,cdev-alias = "pause-cpu4";
		};

		pause-cpu5 {
			qcom,cpus = <&CPU5>;
			qcom,cdev-alias = "pause-cpu5";
		};

		pause-cpu6 {
			qcom,cpus = <&CPU6>;
			qcom,cdev-alias = "pause-cpu6";
		};

		pause-cpu7 {
			qcom,cpus = <&CPU7>;
			qcom,cdev-alias = "pause-cpu7";
		};
	};

	qcom,cpu-hotplug {
		compatible = "qcom,cpu-hotplug";

		cpu0_hotplug: cpu0-hotplug {
			qcom,cpu = <&CPU0>;
			qcom,cdev-alias = "cpu-hotplug0";
			#cooling-cells = <2>;
		};

		cpu1_hotplug: cpu1-hotplug {
			qcom,cpu = <&CPU1>;
			qcom,cdev-alias = "cpu-hotplug1";
			#cooling-cells = <2>;
		};

		cpu2_hotplug: cpu2-hotplug {
			qcom,cpu = <&CPU2>;
			qcom,cdev-alias = "cpu-hotplug2";
			#cooling-cells = <2>;
		};

		cpu3_hotplug: cpu3-hotplug {
			qcom,cpu = <&CPU3>;
			qcom,cdev-alias = "cpu-hotplug3";
			#cooling-cells = <2>;
		};

		cpu4_hotplug: cpu4-hotplug {
			qcom,cpu = <&CPU4>;
			qcom,cdev-alias = "cpu-hotplug4";
			#cooling-cells = <2>;
		};

		cpu5_hotplug: cpu5-hotplug {
			qcom,cpu = <&CPU5>;
			qcom,cdev-alias = "cpu-hotplug5";
			#cooling-cells = <2>;
		};

		cpu6_hotplug: cpu6-hotplug {
			qcom,cpu = <&CPU6>;
			qcom,cdev-alias = "cpu-hotplug6";
			#cooling-cells = <2>;
		};

		cpu7_hotplug: cpu7-hotplug {
			qcom,cpu = <&CPU7>;
			qcom,cdev-alias = "cpu-hotplug7";
			#cooling-cells = <2>;
		};
	};

	qmi-tmd-devices {
		compatible = "qcom,qmi-cooling-devices";

		modem {
			qcom,instance-id = <QMI_MODEM_INST_ID>;

			modem_pa: modem_pa {
				qcom,qmi-dev-name = "pa";
				#cooling-cells = <2>;
			};

			modem_proc: modem_proc {
				qcom,qmi-dev-name = "modem";
				#cooling-cells = <2>;
			};

			modem_current: modem_current {
				qcom,qmi-dev-name = "modem_current";
				#cooling-cells = <2>;
			};

			modem_skin: modem_skin {
				qcom,qmi-dev-name = "modem_skin";
				#cooling-cells = <2>;
			};

			modem_vdd: modem_vdd {
				qcom,qmi-dev-name = "cpuv_restriction_cold";
				#cooling-cells = <2>;
			};
		};

		adsp {
			qcom,instance-id = <QMI_ADSP_INST_ID>;

			adsp_vdd: adsp_vdd {
				qcom,qmi-dev-name = "cpuv_restriction_cold";
				#cooling-cells = <2>;
			};
		};

		cdsp {
			qcom,instance-id = <QMI_CDSP_INST_ID>;

			cdsp_vdd: cdsp_vdd {
				qcom,qmi-dev-name = "cpuv_restriction_cold";
				#cooling-cells = <2>;
			};
		};
	};
};

&thermal_zones {
	aoss {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 0>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	gpu {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 9>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};

			gpu_trip: gpu-trip {
				temperature = <95000>;
				hysteresis = <0>;
				type = "passive";
			};

			gpu_cx_mon: gpu-cx-mon {
				temperature = <100000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};

		cooling-maps {
			gpu-cx-cdev1 {
				trip = <&gpu_cx_mon>;
				cooling-device = <&modem_proc 3 3>;
			};

			gpu-cx-cdev2 {
				trip = <&gpu_cx_mon>;
				cooling-device = <&modem_pa 3 3>;
			};
		};
	};

	cpuss-0 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 1>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};

			cpu45_config: cpu45-config {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};
		};

		cooling-maps {
			cpu45_cdev {
				trip = <&cpu45_config>;
				cooling-device = <&cpu_4_5_pause 1 1>;
			};
		};
	};

	cpuss-1 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 2>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};

			cpu23_config: cpu23-config {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};
		};

		cooling-maps {
			cpu23_cdev {
				trip = <&cpu23_config>;
				cooling-device = <&cpu_2_3_pause 1 1>;
			};
		};
	};

	cpuss-2 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 3>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};

			cpu01_config: cpu01-config {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};
		};

		cooling-maps {
			cpu01_cdev {
				trip = <&cpu01_config>;
				cooling-device = <&cpu_0_1_pause 1 1>;
			};
		};
	};

	cpuss-3 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 4>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	cpu-1-0 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 5>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};

			cpu6_0_config: cpu6-0-config {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};
		};

		cooling-maps {
			cpu6_cdev {
				trip = <&cpu6_0_config>;
				cooling-device = <&cpu6_pause 1 1>;
			};
		};
	};

	cpu-1-1 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 6>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};

			cpu6_1_config: cpu6-1-config {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};
		};

		cooling-maps {
			cpu6_cdev {
				trip = <&cpu6_1_config>;
				cooling-device = <&cpu6_pause 1 1>;
			};
		};
	};

	cpu-1-2 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 7>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};

			cpu7_0_config: cpu7-0-config {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};
		};

		cooling-maps {
			cpu7_cdev {
				trip = <&cpu7_0_config>;
				cooling-device = <&cpu7_pause 1 1>;
			};
		};
	};

	cpu-1-3 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 8>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};

			cpu7_1_config: cpu7-1-config {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};
		};

		cooling-maps {
			cpu7_cdev {
				trip = <&cpu7_1_config>;
				cooling-device = <&cpu7_pause 1 1>;
			};
		};
	};


	q6-hvx {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 10>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};

			q6_hvx_therm: q6-hvx-trip1 {
				temperature = <95000>;
				hysteresis = <0>;
				type = "passive";
			};

			q6_hvx_cx_mon: q6-hvx-cx-mon {
				temperature = <100000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};

		cooling-maps {
			hvx-cx-cdev1 {
				trip = <&q6_hvx_cx_mon>;
				cooling-device = <&modem_proc 3 3>;
			};

			hvx-cx-cdev2 {
				trip = <&q6_hvx_cx_mon>;
				cooling-device = <&modem_pa 3 3>;
			};
		};
	};

	mdm-core {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 11>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};

			mdm_core_cx_mon: mdm-core-cx-mon {
				temperature = <100000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};

		cooling-maps {
			mdm-cx-cdev1 {
				trip = <&mdm_core_cx_mon>;
				cooling-device = <&modem_proc 3 3>;
			};

			mdm-cx-cdev2 {
				trip = <&mdm_core_cx_mon>;
				cooling-device = <&modem_pa 3 3>;
			};
		};
	};

	camera {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 12>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};

			camera_cx_mon: camera-cx-mon {
				temperature = <100000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};

		cooling-maps {
			camera-cx-cdev1 {
				trip = <&camera_cx_mon>;
				cooling-device = <&modem_proc 3 3>;
			};

			camera-cx-cdev2 {
				trip = <&camera_cx_mon>;
				cooling-device = <&modem_pa 3 3>;
			};
		};
	};

	wlan {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 13>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};

			wlan_cx_mon: wlan-cx-mon {
				temperature = <100000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};

		cooling-maps {
			wlan-cx-cdev1 {
				trip = <&wlan_cx_mon>;
				cooling-device = <&modem_proc 3 3>;
			};

			wlan-cx-cdev2 {
				trip = <&wlan_cx_mon>;
				cooling-device = <&modem_pa 3 3>;
			};
		};
	};

	display {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 14>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};

			dispaly_cx_mon: display-cx-mon {
				temperature = <100000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};

		cooling-maps {
			display-cx-cdev1 {
				trip = <&dispaly_cx_mon>;
				cooling-device = <&modem_proc 3 3>;
			};

			display-cx-cdev2 {
				trip = <&dispaly_cx_mon>;
				cooling-device = <&modem_pa 3 3>;
			};
		};
	};

	video {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 15>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};

			video_cx_mon: video-cx-mon {
				temperature = <100000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};

		cooling-maps {
			video-cx-cdev1 {
				trip = <&video_cx_mon>;
				cooling-device = <&modem_proc 3 3>;
			};

			video-cx-cdev2 {
				trip = <&video_cx_mon>;
				cooling-device = <&modem_pa 3 3>;
			};
		};
	};
};