#include <dt-bindings/interconnect/qcom,kalama.h>

&tlmm {
        bt_en_sleep: bt_en_sleep {
                mux {
                        pins = "gpio81";
                        function = "gpio";
                };

                config {
                        pins = "gpio81";
                        drive-strength = <2>;
                        output-low;
                        bias-pull-down;
                };
        };
};

&soc {
	bluetooth: bt-qca-converged {
		compatible = "qcom,bt-qca-converged";
		qcom,converged-dt;
		qcom,wlan-sw-ctrl-gpio = <&tlmm 83 0>; /* WLAN_SW_CNTRL_GPIO*/
		bt_kiwi {
			compatible = "qcom,kiwi";
			pinctrl-names = "default";
			pinctrl-0 = <&bt_en_sleep>;
			qcom,bt-reset-gpio = <&tlmm 81 0>; /* BT_EN */
			qcom,wl-reset-gpio = <&tlmm 80 0>; /* WL_EN */
			qcom,bt-sw-ctrl-gpio = <&tlmm 82 0>; /* SW_CTRL */
			mboxes = <&qmp_aop 0>;
			qcom,bt-vdd18-aon-supply  = <&L15B>; /* BT VDD1.8 AON */
			qcom,bt-vdd-dig-supply    = <&S4E>; /* BT LDO*/
			qcom,bt-vdd-aon-supply    = <&S4E>; /* BT AON LDO*/
			qcom,bt-vdd-rfaOp8-supply = <&S4E>; /* BT RFAOp8 CMN LDO*/
			qcom,bt-vdd-rfa1-supply   = <&S4G>;   /* BT RFA1.2 LDO */
			qcom,bt-vdd-rfa2-supply   = <&S6G>; /* BT RFA1.8 LDO */

			qcom,bt-vdd18-aon-config  = <1800000 1800000 0 1>;
			qcom,bt-vdd-aon-config    = <950000 950000 0 1>;
			qcom,bt-vdd-dig-config    = <950000 950000 0 1>;
			qcom,bt-vdd-rfaOp8-config = <950000 950000 0 1>;
			qcom,bt-vdd-rfa1-config   = <1350000 1350000 0 1>;
			qcom,bt-vdd-rfa2-config   = <1900000 1900000 0 1>;
			qcom,pdc_init_table=
				"{class: wlan_pdc, ss: rf, res: s4e.v, upval: 916}",
				"{class: wlan_pdc, ss: rf, res: s4e.v, dwnval: 612}",
				"{class: wlan_pdc, ss: rf, res: s4g.v, upval: 1316}",
				"{class: wlan_pdc, ss: rf, res: s4g.v, dwnval: 944}",
				"{class: wlan_pdc, ss: rf, res: s6g.v, upval: 1864}",
				"{class: wlan_pdc, ss: rf, res: s6g.v, dwnval: 1820}";
		};
		bt_qca6490 {
			compatible = "qcom,qca6490";
			pinctrl-names = "default";
			pinctrl-0 = <&bt_en_sleep>;
			qcom,bt-reset-gpio = <&tlmm 81 0>; /* BT_EN */
			qcom,wl-reset-gpio = <&tlmm 80 0>; /* WL_EN */
			qcom,bt-sw-ctrl-gpio = <&tlmm 82 0>; /* SW_CTRL */
			mboxes = <&qmp_aop 0>;
			qcom,bt-vdd-io-supply  = <&L15B>; /* BT VDD1.8 AON */
			qcom,bt-vdd-aon-supply = <&S4E>;
			qcom,bt-vdd-dig-supply = <&S4E>;
			qcom,bt-vdd-rfaOp8-supply = <&S4E>; /* BT RFAOp8 CMN LDO*/
			qcom,bt-vdd-rfa1-supply = <&S6G>;
			qcom,bt-vdd-rfa2-supply = <&S4G>;

			qcom,bt-vdd-io-config  = <1800000 1800000 0 1>;
			qcom,bt-vdd-aon-config = <966000 966000 0 1>;
			qcom,bt-vdd-dig-config = <966000 966000 0 1>;
			qcom,bt-vdd-rfaOp8-config = <966000 966000 0 1>;
			qcom,bt-vdd-rfa1-config = <1900000 1900000 0 1>;
			qcom,bt-vdd-rfa2-config = <1350000 1350000 0 1>;
			qcom,pdc_init_table =
				"{class: wlan_pdc, ss: rf, res: s4e.v, upval: 966}",
				"{class: wlan_pdc, ss: rf, res: s4e.v, dwnval: 615}",
				"{class: wlan_pdc, ss: rf, res: s4g.v, upval: 1350}",
				"{class: wlan_pdc, ss: rf, res: s4g.v, dwnval: 945}",
				"{class: wlan_pdc, ss: rf, res: s6g.v, upval: 1900}",
				"{class: wlan_pdc, ss: rf, res: s6g.v, dwnval: 1825}",
				"{class: wlan_pdc, ss: rf, res: s2g.m, enable: 1}",
				"{class: wlan_pdc, ss: rf, res: s2g.v, enable: 1}",
				"{class: wlan_pdc, ss: rf, res: s2g.v, upval: 1012}",
				"{class: wlan_pdc, ss: rf, res: s2g.v, dwnval: 515}";
		};
	};
	slim_msm: slim@6C40000 {
		status =  "ok";
		ngd@1 {
			reg = <1>;
			#address-cells = <1>;
			#size-cells = <1>;
			//slimbus child nodes
			slimbus: btfmslim-driver {
				compatible = "slim217,221";
				reg = <1 0>;
				qcom,btslim-address  = <0x0>; /* BT SLIM EP address*/
				qcom,btslimtx-channels = <159 160>; /* slimbus FM_Tx, SCO_Tx channels */
				qcom,btslimrx-channels = <157 158>; /* slimbus SCO_A2DP_Rx A2DP_Rx */
			};
		};
	};
};

// FM changes
&qupv3_hub_i2c2 {
    status = "ok";
	nq@64 {
		compatible = "rtc6226";
		reg = <0x64>;
		fmint-gpio = <&tlmm 15 0>;
		vdd-supply = <&L16B>;
		rtc6226,vdd-supply-voltage = <2800000 2800000>;
		rtc6226,vdd-load = <15000>;
		vio-supply = <&L15B>;
		rtc6226,vio-supply-voltage = <1800000 1800000>;
	};
};

//uart instance
&qupv3_se14_4uart{
       status = "ok";
};