# SPDX-License-Identifier: GPL-2.0-only
#
# Phy drivers for Qualcomm and Atheros platforms
#
config PHY_ATH79_USB
	tristate "Atheros AR71XX/9XXX USB PHY driver"
	depends on OF && (ATH79 || COMPILE_TEST)
	default y if USB_EHCI_HCD_PLATFORM || USB_OHCI_HCD_PLATFORM
	select RESET_CONTROLLER
	select GENERIC_PHY
	help
	  Enable this to support the USB PHY on Atheros AR71XX/9XXX SoCs.

config PHY_QCOM_APQ8064_SATA
	tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
	depends on ARCH_QCOM
	depends on HAS_IOMEM
	depends on OF
	select GENERIC_PHY

config PHY_QCOM_IPQ4019_USB
	tristate "Qualcomm IPQ4019 USB PHY driver"
	depends on OF && (ARCH_QCOM || COMPILE_TEST)
	select GENERIC_PHY
	help
	  Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s.

config PHY_QCOM_IPQ806X_SATA
	tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
	depends on ARCH_QCOM
	depends on HAS_IOMEM
	depends on OF
	select GENERIC_PHY

config PHY_QCOM_PCIE2
	tristate "Qualcomm PCIe Gen2 PHY Driver"
	depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST)
	select GENERIC_PHY
	help
	  Enable this to support the Qualcomm PCIe PHY, used with the Synopsys
	  based PCIe controller.

config PHY_QCOM_QMP
	tristate "Qualcomm QMP PHY Driver"
	depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST)
	select GENERIC_PHY
	help
	  Enable this to support the QMP PHY transceiver that is used
	  with controllers such as PCIe, UFS, and USB on Qualcomm chips.

config PHY_QCOM_QUSB2
	tristate "Qualcomm QUSB2 PHY Driver"
	depends on OF && (ARCH_QCOM || COMPILE_TEST)
	depends on NVMEM || !NVMEM
	select GENERIC_PHY
	help
	  Enable this to support the HighSpeed QUSB2 PHY transceiver for USB
	  controllers on Qualcomm chips. This driver supports the high-speed
	  PHY which is usually paired with either the ChipIdea or Synopsys DWC3
	  USB IPs on MSM SOCs.

config PHY_QCOM_UFS
	tristate "Qualcomm Technologies, Inc. UFS PHY driver"
	depends on OF && ARCH_QCOM
	select GENERIC_PHY
	help
	  Enables support for UFS PHY on Qualcomm Technologies, Inc.
	  chipsets.
	  This driver together with the UFS PHY controller specific
	  driver enables the UFS PHY support for Qualcomm Technologies, Inc.
	  chips.

if PHY_QCOM_UFS

config PHY_QCOM_UFS_V4
	tristate
	default PHY_QCOM_UFS
	help
	  Support for 7nm UFS QMP phy present on QCOM chipsets.

config PHY_QCOM_UFS_V3
	tristate "Qualcomm Technologies, Inc. UFS PHY V3 driver"
	depends on PHY_QCOM_UFS
	help
	  Support for 11nm UFS QMP phy present on QCOM chipsets.

config PHY_QCOM_UFS_QRBTC_SDM845
	tristate "Qualcomm Technologies, Inc. UFS Presil Phy Driver"
	depends on PHY_QCOM_UFS && REGULATOR_STUB
	help
          Enable this to support UFS PHY on pre-silicon platforms.
	  The support is restricted to HS-G1 only on both Tx and Rx.
	  No low power mode support is present.
	  Doesn't restrict number of lanes.

endif

config PHY_QCOM_USB_HS
	tristate "Qualcomm USB HS PHY module"
	depends on USB_ULPI_BUS
	depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
	select GENERIC_PHY
	help
	  Support for the USB high-speed ULPI compliant phy on Qualcomm
	  chipsets.

config PHY_QCOM_USB_SNPS_FEMTO_V2
	tristate "Qualcomm SNPS FEMTO USB HS PHY V2 module"
	depends on OF && (ARCH_QCOM || COMPILE_TEST)
	select GENERIC_PHY
	help
	  Enable support for the USB high-speed SNPS Femto phy on Qualcomm
	  chipsets.  This PHY has differences in the register map compared
	  to the V1 variants.  The PHY is paired with a Synopsys DWC3 USB
	  controller on Qualcomm SOCs.

config PHY_QCOM_USB_HSIC
	tristate "Qualcomm USB HSIC ULPI PHY module"
	depends on USB_ULPI_BUS
	select GENERIC_PHY
	help
	  Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.

config PHY_QCOM_USB_HS_28NM
	tristate "Qualcomm 28nm High-Speed PHY"
	depends on OF && (ARCH_QCOM || COMPILE_TEST)
	depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
	select GENERIC_PHY
	help
	  Enable this to support the Qualcomm Synopsys DesignWare Core 28nm
	  High-Speed PHY driver. This driver supports the Hi-Speed PHY which
	  is usually paired with either the ChipIdea or Synopsys DWC3 USB
	  IPs on MSM SOCs.

config PHY_QCOM_USB_SS
	tristate "Qualcomm USB Super-Speed PHY driver"
	depends on OF && (ARCH_QCOM || COMPILE_TEST)
	depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
	select GENERIC_PHY
	help
	  Enable this to support the Super-Speed USB transceiver on various
	  Qualcomm chipsets.

config PHY_QCOM_IPQ806X_USB
	tristate "Qualcomm IPQ806x DWC3 USB PHY driver"
	depends on HAS_IOMEM
	depends on OF && (ARCH_QCOM || COMPILE_TEST)
	select GENERIC_PHY
	help
	  This option enables support for the Synopsis PHYs present inside the
	  Qualcomm USB3.0 DWC3 controller on ipq806x SoC. This driver supports
	  both HS and SS PHY controllers.