37 lines
1.1 KiB
Text
37 lines
1.1 KiB
Text
QTI TRINKET Network-On-Chip interconnect driver binding
|
|
-----------------------------------------------------------
|
|
|
|
Required properties :
|
|
- compatible : shall contain only one of the following:
|
|
"qcom,trinket-bimc",
|
|
"qcom,trinket-system_noc",
|
|
"qcom,trinket-config_noc",
|
|
"qcom,trinket-qup_virt",
|
|
"qcom,trinket-mmnrt_virt",
|
|
"qcom,trinket-mmrt_virt",
|
|
- #interconnect-cells : should contain 1
|
|
|
|
reg : specifies the physical base address and size of registers
|
|
clocks : list of phandles and specifiers to all interconnect bus clocks
|
|
clock-names : clock names should include both "bus" and "bus_a"
|
|
|
|
The following are optional properties:
|
|
|
|
qcom,util-factor : Parameter that represents the DDR utilization factor
|
|
to be used in aggregation scheme. It is represented as
|
|
actual util-factor * 100.
|
|
|
|
Examples:
|
|
|
|
soc {
|
|
...
|
|
system_noc: interconnect@1900000 {
|
|
reg = <0x1900000 0x8200>;
|
|
compatible = "qcom,trinket-sys_noc";
|
|
#interconnect-cells = <1>;
|
|
qcom,keepalive;
|
|
clock-names = "bus", "bus_a";
|
|
clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
|
|
<&rpmcc RPM_SMD_SNOC_A_CLK>;
|
|
};
|
|
};
|