50 lines
1.5 KiB
Text
50 lines
1.5 KiB
Text
Qualcomm Technologies, Inc SNxxx NFC NCI device
|
|
|
|
Near Field Communication (NFC) device is based on NFC Controller Interface (NCI)
|
|
|
|
Required properties:
|
|
|
|
- compatible: "qcom,sn-nci"
|
|
- reg: NCI I2C slave address.
|
|
- qcom,sn-ven: specific gpio for hardware reset.
|
|
- qcom,sn-irq: specific gpio for read interrupt.
|
|
- qcom,sn-firm: gpio for firmware download
|
|
- qcom,sn-clkreq: gpio for clock
|
|
- interrupt-parent: Should be phandle for the interrupt controller
|
|
that services interrupts for this device.
|
|
- interrupts: Nfc read interrupt,gpio-clk-req interrupt
|
|
|
|
|
|
Recommended properties:
|
|
|
|
- interrupt-names: names of interrupts, should include "nfc_irq", used for reference
|
|
|
|
|
|
Optional properties:
|
|
|
|
- pinctrl-names, pinctrl-0, pincntrl-1: references to our pincntrl settings
|
|
- clocks, clock-names: must contain the SNxxx's core clock.
|
|
- qcom,clk-src: NFC clock for antenna
|
|
|
|
Example:
|
|
|
|
sn-nci@2b {
|
|
compatible = "qcom,sn-nci";
|
|
reg = <0x2b>;
|
|
qcom,sn-irq = <&tlmm 87 0x00>;
|
|
qcom,sn-ven = <&tlmm 62 0x00>;
|
|
qcom,sn-firm = <&tlmm 86 0x00>;
|
|
qcom,sn-clkreq = <&tlmm 63 0x00>;
|
|
qcom,clk-src = "BBCLK2";
|
|
interrupt-parent = <&tlmm>;
|
|
interrupts = <29 0>;
|
|
interrupt-names = "nfc_irq";
|
|
pinctrl-names = "default","sleep";
|
|
pinctrl-0 = <&nfc_enable_active &nfc_fwdl_active
|
|
&nfc_clk_req_active &nfc_int_active>;
|
|
pinctrl-1 = <&nfc_enable_suspend &nfc_fwdl_suspend
|
|
&nfc_clk_req_suspend &nfc_int_suspend>;
|
|
clocks = <&clock_rpm clk_bb_clk2_pin>;
|
|
clock-names = "ref_clk";
|
|
status = "ok";
|
|
};
|