Rtwo/kernel/motorola/sm8550-devicetrees/bindings/soc/qcom/qcom,pmic-glink.txt
2025-09-30 19:22:48 -05:00

70 lines
1.8 KiB
Text

QTI PMIC Glink binding
This binding describes the Qualcomm Technologies, Inc. PMIC GLink device. PMIC
Glink handles the communication between different clients (e.g. battery charger,
UCSI PPM) on the Application processor and charger firmware running on the
remote subsystem (e.g. DSP) over Glink channel.
- compatible:
Usage: required
Value type: <stringlist>
Definition: must be "qcom,pmic-glink"
- qcom,pmic-glink-channel:
Usage: required
Value type: <stringlist>
Definition: should be same as Glink channel name under rpmsg device.
- qcom,subsys-name:
Usage: optional
Value type: <stringlist>
Definition: should be the subsystem name for which subsystem restart
notifications should be handled and state transitions be
sent to the clients.
- qcom,protection-domain:
Usage: optional
Value type: <stringlist>
Definition: should be the protection domain service name and path name
for which notifications should be handled and state
transitions be sent to the clients.
Refer to Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt for
information on rpmsg device ("qcom,pmic_glink_rpmsg" used in the example below)
that needs to be specified under a glink device.
= SUBNODE
Each subnode specifies a client of PMIC Glink device that will be instantiated
after the PMIC Glink device initializes.
= EXAMPLE
= PMIC Glink rpmsg device
&glink_adsp {
...
qcom,pmic_glink_rpmsg {
qcom,glink-channels = "PMIC_RTR_ADSP_APPS";
};
...
};
= PMIC Glink device with child subnodes
&soc {
qcom,pmic_glink {
compatible = "qcom,pmic-glink";
qcom,pmic-glink-channel = "PMIC_RTR_ADSP_APPS";
qcom,subsys-name = "adsp";
qcom,protection-domain = "tms/servreg", "msm/adsp/charger_pd";
qcom,batt_chg {
compatible = "qcom,battery-charger";
};
qcom,ucsi_ppm {
compatible = "qcom,ucsi-ppm";
};
};
};