41 lines
1 KiB
Text
41 lines
1 KiB
Text
Policy Engine(PE) recommendation as sensor.
|
|
|
|
The QTI Policy Engine sensor device will register the policy engine
|
|
recommendation with thermal framework as a sensor. This will enable
|
|
to provide configuration to mitigate cooling devices when a recommendation
|
|
is sent from Policy Engine hardware. The recommendations are mitigation
|
|
levels based on CX operating level.
|
|
|
|
There can be multiple Policy Engine hardwares for different rails.
|
|
|
|
Properties:
|
|
|
|
- compatible:
|
|
Usage: required
|
|
Value type: <string>
|
|
Definition: should be "qcom,policy-engine"
|
|
|
|
- reg:
|
|
Usage: required
|
|
Value type: <u32>
|
|
Definition: RDPM_PE base address.
|
|
|
|
- #thermal-sensor-cells:
|
|
Usage: required
|
|
Value type: <integer>
|
|
Definition: Must be 0. See thermal.txt for description.
|
|
|
|
- interrupts:
|
|
Usage: required
|
|
Value type: <prop-encoded-array>
|
|
Definition: Policy Engine master interrupt.
|
|
|
|
|
|
Example:
|
|
|
|
cx_rdpm_pe@0x00635000 {
|
|
compatible = "qcom,policy-engine";
|
|
#thermal-sensor-cells = <0>;
|
|
reg = <0x00635000 0x1000>;
|
|
interrupts = <GIC_SPI 243 IRQ_TYPE_EDGE_RISING>;
|
|
};
|