From 2cc4bb6e74d69f14987b39cb70301048d0f5e3fa Mon Sep 17 00:00:00 2001 From: Arian Date: Sun, 21 Nov 2021 15:21:58 +0100 Subject: [PATCH] sm6375-common: rootdir: Remove unnecessary class_core script Change-Id: I065407a7b9aaf186a22964786af97b36a140c793 --- rootdir/bin/init.qcom.class_core.sh | 216 ---------------------------- rootdir/etc/init/hw/init.qcom.rc | 5 - 2 files changed, 221 deletions(-) delete mode 100755 rootdir/bin/init.qcom.class_core.sh diff --git a/rootdir/bin/init.qcom.class_core.sh b/rootdir/bin/init.qcom.class_core.sh deleted file mode 100755 index 8f8265d..0000000 --- a/rootdir/bin/init.qcom.class_core.sh +++ /dev/null @@ -1,216 +0,0 @@ -#!/vendor/bin/sh - -# Copyright (c) 2012-2013, The Linux Foundation. All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions are met: -# * Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# * Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# * Neither the name of The Linux Foundation nor -# the names of its contributors may be used to endorse or promote -# products derived from this software without specific prior written -# permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR -# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; -# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR -# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF -# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# - -# Set platform variables -target=`getprop ro.board.platform` -if [ -f /sys/devices/soc0/hw_platform ]; then - soc_hwplatform=`cat /sys/devices/soc0/hw_platform` 2> /dev/null -else - soc_hwplatform=`cat /sys/devices/system/soc/soc0/hw_platform` 2> /dev/null -fi -if [ -f /sys/devices/soc0/soc_id ]; then - soc_hwid=`cat /sys/devices/soc0/soc_id` 2> /dev/null -else - soc_hwid=`cat /sys/devices/system/soc/soc0/id` 2> /dev/null -fi -if [ -f /sys/devices/soc0/platform_version ]; then - soc_hwver=`cat /sys/devices/soc0/platform_version` 2> /dev/null -else - soc_hwver=`cat /sys/devices/system/soc/soc0/platform_version` 2> /dev/null -fi - - -# Dynamic Memory Managment (DMM) provides a sys file system to the userspace -# that can be used to plug in/out memory that has been configured as unstable. -# This unstable memory can be in Active or In-Active State. -# Each of which the userspace can request by writing to a sys file. -# -# ro.dev.dmm = 1; Indicates that DMM is enabled in the Android User Space. This -# property is set in the Android system properties file. -# -# If ro.dev.dmm.dpd.start_address is set here then the target has a memory -# configuration that supports DynamicMemoryManagement. -init_DMM() -{ - block=-1 - - case "$target" in - "msm7630_surf" | "msm7630_1x" | "msm7630_fusion" | "msm8960") - ;; - *) - return - ;; - esac - - mem="/sys/devices/system/memory" - op=`cat $mem/movable_start_bytes` - case "$op" in - "0") - log -p i -t DMM DMM Disabled. movable_start_bytes not set: $op - ;; - - "$mem/movable_start_bytes: No such file or directory ") - log -p i -t DMM DMM Disabled. movable_start_bytes does not exist: $op - ;; - - *) - log -p i -t DMM DMM available. movable_start_bytes at $op - movable_start_bytes=0x`cat $mem/movable_start_bytes` - block_size_bytes=0x`cat $mem/block_size_bytes` - block=$((#${movable_start_bytes}/${block_size_bytes})) - - chown -h system.system $mem/memory$block/state - chown -h system.system $mem/probe - chown -h system.system $mem/active - chown -h system.system $mem/remove - - case "$target" in - "msm7630_surf" | "msm7630_1x" | "msm7630_fusion") - echo $movable_start_bytes > $mem/probe - case "$?" in - "0") - log -p i -t DMM $movable_start_bytes to physical hotplug succeeded. - ;; - *) - log -p e -t DMM $movable_start_bytes to physical hotplug failed. - return - ;; - esac - - echo online > $mem/memory$block/state - case "$?" in - "0") - log -p i -t DMM \'echo online\' to logical hotplug succeeded. - ;; - *) - log -p e -t DMM \'echo online\' to logical hotplug failed. - return - ;; - esac - ;; - esac - - setprop ro.dev.dmm.dpd.start_address $movable_start_bytes - setprop ro.dev.dmm.dpd.block $block - ;; - esac - - case "$target" in - "msm8960") - return - ;; - esac - - # For 7X30 targets: - # ro.dev.dmm.dpd.start_address is set when the target has a 2x256Mb memory - # configuration. This is also used to indicate that the target is capable of - # setting EBI-1 to Deep Power Down or Self Refresh. - op=`cat $mem/low_power_memory_start_bytes` - case "$op" in - "0") - log -p i -t DMM Self-Refresh-Only Disabled. low_power_memory_start_bytes not set:$op - ;; - "$mem/low_power_memory_start_bytes No such file or directory ") - log -p i -t DMM Self-Refresh-Only Disabled. low_power_memory_start_bytes does not exist:$op - ;; - *) - log -p i -t DMM Self-Refresh-Only available. low_power_memory_start_bytes at $op - ;; - esac -} - -# -# For controlling console and shell on console on 8960 - perist.serial.enable 8960 -# On other target use default ro.debuggable property. -# -serial=`getprop persist.serial.enable` -dserial=`getprop ro.debuggable` -case "$target" in - "msm8960") - case "$serial" in - "0") - echo 0 > /sys/devices/platform/msm_serial_hsl.0/console - ;; - "1") - echo 1 > /sys/devices/platform/msm_serial_hsl.0/console - start console - ;; - *) - case "$dserial" in - "1") - start console - ;; - esac - ;; - esac - ;; - - "msm8610" | "msm8974" | "msm8226") - case "$serial" in - "0") - echo 0 > /sys/devices/f991f000.serial/console - ;; - "1") - echo 1 > /sys/devices/f991f000.serial/console - start console - ;; - *) - case "$dserial" in - "1") - start console - ;; - esac - ;; - esac - ;; - *) - case "$dserial" in - "1") - start console - ;; - esac - ;; -esac - -case "$target" in - "msm7630_surf" | "msm7630_1x" | "msm7630_fusion") - insmod /system/lib/modules/ss_mfcinit.ko - insmod /system/lib/modules/ss_vencoder.ko - insmod /system/lib/modules/ss_vdecoder.ko - chmod -h 0666 /dev/ss_mfc_reg - chmod -h 0666 /dev/ss_vdec - chmod -h 0666 /dev/ss_venc - - init_DMM - ;; - - "msm8960") - init_DMM - ;; -esac diff --git a/rootdir/etc/init/hw/init.qcom.rc b/rootdir/etc/init/hw/init.qcom.rc index 3aa8b86..dfe4e71 100644 --- a/rootdir/etc/init/hw/init.qcom.rc +++ b/rootdir/etc/init/hw/init.qcom.rc @@ -417,11 +417,6 @@ on property:vendor.media.target_variant=* setprop ro.media.xml_variant.codecs_performance ${vendor.media.target_variant} setprop ro.media.xml_variant.profiles ${vendor.media.target_variant} -service qcom-c_core-sh /vendor/bin/init.qcom.class_core.sh - class core - user root - oneshot - service qcom-c_main-sh /vendor/bin/init.class_main.sh class main user root