diff --git a/proprietary-files.txt b/proprietary-files.txt
index ee49db3..adcef7d 100644
--- a/proprietary-files.txt
+++ b/proprietary-files.txt
@@ -145,6 +145,7 @@ vendor/lib64/libmdsprpc.so
 # Charger
 vendor/bin/charge_only_mode
 vendor/bin/hvdcp_opti
+vendor/bin/init.qti.chg_policy.sh
 vendor/etc/charger_fstab.qti
 vendor/etc/charger_fw_fstab.qti
 vendor/etc/init/vendor.qti.hardware.charger_monitor@1.0-service.rc
@@ -483,6 +484,14 @@ vendor/lib64/vendor.qti.hardware.iop@2.0.so
 vendor/bin/msm_irqbalance
 vendor/etc/msm_irqbalance.conf
 
+# Kernel
+vendor/bin/init.kernel.post_boot-blair.sh
+vendor/bin/init.kernel.post_boot-holi.sh
+vendor/bin/init.kernel.post_boot.sh
+vendor/bin/init.qti.kernel.sh
+vendor/bin/vendor_modprobe.sh
+vendor/etc/init/hw/init.qti.kernel.rc
+
 # Keymaster
 vendor/bin/hw/android.hardware.keymaster@4.1-service-qti
 vendor/etc/init/android.hardware.keymaster@4.1-service-qti.rc
@@ -627,6 +636,10 @@ vendor/lib64/vendor.qti.hardware.alarm@1.0.so|8956937951c6f99727ace3380f46275e62
 # QCC
 vendor/lib64/vendor.qti.hardware.qccsyshal@1.0.so
 
+# QCV
+vendor/bin/init.qti.qcv.sh
+vendor/etc/init/init.qti.qcv.rc
+
 # QMI
 system/etc/permissions/privapp-permissions-qti.xml
 system/etc/sysconfig/qti_whitelist.xml
@@ -954,6 +967,7 @@ vendor/lib64/vendor.qti.imsrtpservice@3.0.so;MODULE_SUFFIX=_vendor
 
 # Sensors
 vendor/bin/hw/vendor.qti.hardware.sensorscalibrate@1.0-service
+vendor/bin/init.qcom.sensors.sh
 vendor/bin/sensors.qti
 vendor/bin/sscrpcd
 vendor/etc/init/init.vendor.sensors.rc
diff --git a/rootdir/bin/init.kernel.post_boot-lahaina.sh b/rootdir/bin/init.kernel.post_boot-lahaina.sh
deleted file mode 100755
index 6dc5724..0000000
--- a/rootdir/bin/init.kernel.post_boot-lahaina.sh
+++ /dev/null
@@ -1,369 +0,0 @@
-#=============================================================================
-# Copyright (c) 2020-2021 Qualcomm Technologies, Inc.
-# All Rights Reserved.
-# Confidential and Proprietary - Qualcomm Technologies, Inc.
-#
-# Copyright (c) 2009-2012, 2014-2019, The Linux Foundation. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-#     * Redistributions of source code must retain the above copyright
-#       notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright
-#       notice, this list of conditions and the following disclaimer in the
-#       documentation and/or other materials provided with the distribution.
-#     * Neither the name of The Linux Foundation nor
-#       the names of its contributors may be used to endorse or promote
-#       products derived from this software without specific prior written
-#       permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-# NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#=============================================================================
-
-function configure_zram_parameters() {
-	# Moto yangbq2: Skip this if we are using zram from fstab.
-	using_zram_from_fstab=`getprop ro.boot.using_zram_from_fstab`
-	if [ "$using_zram_from_fstab" == "true" ]; then
-		return
-	fi
-	MemTotalStr=`cat /proc/meminfo | grep MemTotal`
-	MemTotal=${MemTotalStr:16:8}
-
-	low_ram=`getprop ro.config.low_ram`
-
-	# Zram disk - 75% for Go and < 2GB devices .
-	# For >2GB Non-Go devices, size = 50% of RAM size. Limit the size to 4GB.
-	# And enable lz4 zram compression for Go targets.
-
-	let RamSizeGB="( $MemTotal / 1048576 ) + 1"
-	diskSizeUnit=M
-	if [ $RamSizeGB -le 2 ]; then
-		let zRamSizeMB="( $RamSizeGB * 1024 ) * 3 / 4"
-	else
-		let zRamSizeMB="( $RamSizeGB * 1024 ) / 2"
-	fi
-
-	# use MB avoid 32 bit overflow
-	if [ $zRamSizeMB -gt 4096 ]; then
-		let zRamSizeMB=4096
-	fi
-
-	if [ "$low_ram" == "true" ]; then
-		echo lz4 > /sys/block/zram0/comp_algorithm
-	fi
-
-	if [ -f /sys/block/zram0/disksize ]; then
-		if [ -f /sys/block/zram0/use_dedup ]; then
-			echo 1 > /sys/block/zram0/use_dedup
-		fi
-		echo "$zRamSizeMB""$diskSizeUnit" > /sys/block/zram0/disksize
-
-		# ZRAM may use more memory than it saves if SLAB_STORE_USER
-		# debug option is enabled.
-		if [ -e /sys/kernel/slab/zs_handle ]; then
-			echo 0 > /sys/kernel/slab/zs_handle/store_user
-		fi
-		if [ -e /sys/kernel/slab/zspage ]; then
-			echo 0 > /sys/kernel/slab/zspage/store_user
-		fi
-
-		mkswap /dev/block/zram0
-		swapon /dev/block/zram0 -p 32758
-	fi
-}
-
-function configure_read_ahead_kb_values() {
-	MemTotalStr=`cat /proc/meminfo | grep MemTotal`
-	MemTotal=${MemTotalStr:16:8}
-
-	dmpts=$(ls /sys/block/*/queue/read_ahead_kb | grep -e dm -e mmc)
-
-	# Set 128 for <= 3GB &
-	# set 512 for >= 4GB targets.
-	if [ $MemTotal -le 3145728 ]; then
-		ra_kb=128
-	else
-		ra_kb=512
-	fi
-	if [ -f /sys/block/mmcblk0/bdi/read_ahead_kb ]; then
-		echo $ra_kb > /sys/block/mmcblk0/bdi/read_ahead_kb
-	fi
-	if [ -f /sys/block/mmcblk0rpmb/bdi/read_ahead_kb ]; then
-		echo $ra_kb > /sys/block/mmcblk0rpmb/bdi/read_ahead_kb
-	fi
-	for dm in $dmpts; do
-		echo $ra_kb > $dm
-	done
-}
-
-function configure_memory_parameters() {
-	# Set Memory parameters.
-	#
-	# Set per_process_reclaim tuning parameters
-	# All targets will use vmpressure range 50-70,
-	# All targets will use 512 pages swap size.
-	#
-	# Set Low memory killer minfree parameters
-	# 32 bit Non-Go, all memory configurations will use 15K series
-	# 32 bit Go, all memory configurations will use uLMK + Memcg
-	# 64 bit will use Google default LMK series.
-	#
-	# Set ALMK parameters (usually above the highest minfree values)
-	# vmpressure_file_min threshold is always set slightly higher
-	# than LMK minfree's last bin value for all targets. It is calculated as
-	# vmpressure_file_min = (last bin - second last bin ) + last bin
-	#
-	# Set allocstall_threshold to 0 for all targets.
-	#
-
-	configure_zram_parameters
-	configure_read_ahead_kb_values
-	echo 100 > /proc/sys/vm/swappiness
-}
-
-rev=`cat /sys/devices/soc0/revision`
-ddr_type=`od -An -tx /proc/device-tree/memory/ddr_device_type`
-ddr_type4="07"
-ddr_type5="08"
-
-# Core control parameters for gold
-echo 2 > /sys/devices/system/cpu/cpu4/core_ctl/min_cpus
-echo 60 > /sys/devices/system/cpu/cpu4/core_ctl/busy_up_thres
-echo 30 > /sys/devices/system/cpu/cpu4/core_ctl/busy_down_thres
-echo 100 > /sys/devices/system/cpu/cpu4/core_ctl/offline_delay_ms
-echo 3 > /sys/devices/system/cpu/cpu4/core_ctl/task_thres
-
-# Core control parameters for gold+
-echo 0 > /sys/devices/system/cpu/cpu7/core_ctl/min_cpus
-echo 60 > /sys/devices/system/cpu/cpu7/core_ctl/busy_up_thres
-echo 30 > /sys/devices/system/cpu/cpu7/core_ctl/busy_down_thres
-echo 100 > /sys/devices/system/cpu/cpu7/core_ctl/offline_delay_ms
-echo 1 > /sys/devices/system/cpu/cpu7/core_ctl/task_thres
-
-# Controls how many more tasks should be eligible to run on gold CPUs
-# w.r.t number of gold CPUs available to trigger assist (max number of
-# tasks eligible to run on previous cluster minus number of CPUs in
-# the previous cluster).
-#
-# Setting to 1 by default which means there should be at least
-# 4 tasks eligible to run on gold cluster (tasks running on gold cores
-# plus misfit tasks on silver cores) to trigger assitance from gold+.
-echo 1 > /sys/devices/system/cpu/cpu7/core_ctl/nr_prev_assist_thresh
-
-# Disable Core control on silver
-echo 0 > /sys/devices/system/cpu/cpu0/core_ctl/enable
-
-# Setting b.L scheduler parameters
-echo 95 95 > /proc/sys/kernel/sched_upmigrate
-echo 85 85 > /proc/sys/kernel/sched_downmigrate
-echo 100 > /proc/sys/kernel/sched_group_upmigrate
-echo 85 > /proc/sys/kernel/sched_group_downmigrate
-echo 1 > /proc/sys/kernel/sched_walt_rotate_big_tasks
-echo 400000000 > /proc/sys/kernel/sched_coloc_downmigrate_ns
-echo 39000000 39000000 39000000 39000000 39000000 39000000 39000000 5000000 > /proc/sys/kernel/sched_coloc_busy_hyst_cpu_ns
-echo 240 > /proc/sys/kernel/sched_coloc_busy_hysteresis_enable_cpus
-echo 10 10 10 10 10 10 10 95 > /proc/sys/kernel/sched_coloc_busy_hyst_cpu_busy_pct
-
-# set the threshold for low latency task boost feature which prioritize
-# binder activity tasks
-echo 325 > /proc/sys/kernel/walt_low_latency_task_threshold
-
-# cpuset parameters
-echo 0-3 > /dev/cpuset/background/cpus
-echo 0-3 > /dev/cpuset/system-background/cpus
-
-# Turn off scheduler boost at the end
-echo 0 > /proc/sys/kernel/sched_boost
-
-# configure governor settings for silver cluster
-echo "schedutil" > /sys/devices/system/cpu/cpufreq/policy0/scaling_governor
-echo 0 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/down_rate_limit_us
-echo 0 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/up_rate_limit_us
-if [ $rev == "1.0" ]; then
-	echo 1190400 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/hispeed_freq
-else
-	echo 1209600 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/hispeed_freq
-fi
-echo 691200 > /sys/devices/system/cpu/cpufreq/policy0/scaling_min_freq
-echo 1 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/pl
-
-# configure input boost settings
-if [ $rev == "1.0" ]; then
-	echo "0:1382800" > /sys/devices/system/cpu/cpu_boost/input_boost_freq
-else
-	echo "0:1305600" > /sys/devices/system/cpu/cpu_boost/input_boost_freq
-fi
-echo 120 > /sys/devices/system/cpu/cpu_boost/input_boost_ms
-
-# configure governor settings for gold cluster
-echo "schedutil" > /sys/devices/system/cpu/cpufreq/policy4/scaling_governor
-echo 0 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/down_rate_limit_us
-echo 0 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/up_rate_limit_us
-if [ $rev == "1.0" ]; then
-	echo 1497600 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/hispeed_freq
-else
-	echo 1555200 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/hispeed_freq
-fi
-echo 1 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/pl
-
-# configure governor settings for gold+ cluster
-echo "schedutil" > /sys/devices/system/cpu/cpufreq/policy7/scaling_governor
-echo 0 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/down_rate_limit_us
-echo 0 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/up_rate_limit_us
-if [ $rev == "1.0" ]; then
-	echo 1536000 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/hispeed_freq
-else
-	echo 1670400 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/hispeed_freq
-fi
-echo 1 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/pl
-
-# configure bus-dcvs
-for device in /sys/devices/platform/soc
-do
-	for cpubw in $device/*cpu-cpu-llcc-bw/devfreq/*cpu-cpu-llcc-bw
-	do
-		cat $cpubw/available_frequencies | cut -d " " -f 1 > $cpubw/min_freq
-		echo "4577 7110 9155 12298 14236 15258" > $cpubw/bw_hwmon/mbps_zones
-		echo 4 > $cpubw/bw_hwmon/sample_ms
-		echo 80 > $cpubw/bw_hwmon/io_percent
-		echo 20 > $cpubw/bw_hwmon/hist_memory
-		echo 10 > $cpubw/bw_hwmon/hyst_length
-		echo 30 > $cpubw/bw_hwmon/down_thres
-		echo 0 > $cpubw/bw_hwmon/guard_band_mbps
-		echo 250 > $cpubw/bw_hwmon/up_scale
-		echo 1600 > $cpubw/bw_hwmon/idle_mbps
-		echo 12298 > $cpubw/max_freq
-		echo 40 > $cpubw/polling_interval
-	done
-
-	for llccbw in $device/*cpu-llcc-ddr-bw/devfreq/*cpu-llcc-ddr-bw
-	do
-		cat $llccbw/available_frequencies | cut -d " " -f 1 > $llccbw/min_freq
-		if [ ${ddr_type:4:2} == $ddr_type4 ]; then
-			echo "1720 2086 2929 3879 5931 6515 8136" > $llccbw/bw_hwmon/mbps_zones
-		elif [ ${ddr_type:4:2} == $ddr_type5 ]; then
-			echo "1720 2086 2929 3879 6515 7980 12191" > $llccbw/bw_hwmon/mbps_zones
-		fi
-		echo 4 > $llccbw/bw_hwmon/sample_ms
-		echo 80 > $llccbw/bw_hwmon/io_percent
-		echo 20 > $llccbw/bw_hwmon/hist_memory
-		echo 10 > $llccbw/bw_hwmon/hyst_length
-		echo 30 > $llccbw/bw_hwmon/down_thres
-		echo 0 > $llccbw/bw_hwmon/guard_band_mbps
-		echo 250 > $llccbw/bw_hwmon/up_scale
-		echo 1600 > $llccbw/bw_hwmon/idle_mbps
-		echo 6515 > $llccbw/max_freq
-		echo 40 > $llccbw/polling_interval
-	done
-
-	for l3bw in $device/*snoop-l3-bw/devfreq/*snoop-l3-bw
-	do
-		cat $l3bw/available_frequencies | cut -d " " -f 1 > $l3bw/min_freq
-		echo 4 > $l3bw/bw_hwmon/sample_ms
-		echo 10 > $l3bw/bw_hwmon/io_percent
-		echo 20 > $l3bw/bw_hwmon/hist_memory
-		echo 10 > $l3bw/bw_hwmon/hyst_length
-		echo 0 > $l3bw/bw_hwmon/down_thres
-		echo 0 > $l3bw/bw_hwmon/guard_band_mbps
-		echo 0 > $l3bw/bw_hwmon/up_scale
-		echo 1600 > $l3bw/bw_hwmon/idle_mbps
-		echo 9155 > $l3bw/max_freq
-		echo 40 > $l3bw/polling_interval
-	done
-
-	# configure mem_latency settings for LLCC and DDR scaling and qoslat
-	for memlat in $device/*lat/devfreq/*lat
-	do
-		cat $memlat/available_frequencies | cut -d " " -f 1 > $memlat/min_freq
-		echo 8 > $memlat/polling_interval
-		echo 400 > $memlat/mem_latency/ratio_ceil
-	done
-
-	# configure compute settings for gold latfloor
-	for latfloor in $device/*cpu4-cpu*latfloor/devfreq/*cpu4-cpu*latfloor
-	do
-		cat $latfloor/available_frequencies | cut -d " " -f 1 > $latfloor/min_freq
-		echo 8 > $latfloor/polling_interval
-	done
-
-	# configure mem_latency settings for prime latfloor
-	for latfloor in $device/*cpu7-cpu*latfloor/devfreq/*cpu7-cpu*latfloor
-	do
-		cat $latfloor/available_frequencies | cut -d " " -f 1 > $latfloor/min_freq
-		echo 8 > $latfloor/polling_interval
-		echo 25000 > $latfloor/mem_latency/ratio_ceil
-	done
-
-	# CPU4 L3 ratio ceil
-	for l3gold in $device/*cpu4-cpu-l3-lat/devfreq/*cpu4-cpu-l3-lat
-	do
-		echo 4000 > $l3gold/mem_latency/ratio_ceil
-	done
-
-	# CPU5 L3 ratio ceil
-	for l3gold in $device/*cpu5-cpu-l3-lat/devfreq/*cpu5-cpu-l3-lat
-	do
-		echo 4000 > $l3gold/mem_latency/ratio_ceil
-	done
-
-	# CPU6 L3 ratio ceil
-	for l3gold in $device/*cpu6-cpu-l3-lat/devfreq/*cpu6-cpu-l3-lat
-	do
-		echo 4000 > $l3gold/mem_latency/ratio_ceil
-	done
-
-	# prime L3 ratio ceil
-	for l3prime in $device/*cpu7-cpu-l3-lat/devfreq/*cpu7-cpu-l3-lat
-	do
-	    echo 20000 > $l3prime/mem_latency/ratio_ceil
-	done
-
-	# qoslat ratio ceil
-	for qoslat in $device/*qoslat/devfreq/*qoslat
-	do
-	    echo 50 > $qoslat/mem_latency/ratio_ceil
-	done
-done
-echo N > /sys/module/lpm_levels/parameters/sleep_disabled
-echo s2idle > /sys/power/mem_sleep
-configure_memory_parameters
-
-# Let kernel know our image version/variant/crm_version
-if [ -f /sys/devices/soc0/select_image ]; then
-	image_version="10:"
-	image_version+=`getprop ro.build.id`
-	image_version+=":"
-	image_version+=`getprop ro.build.version.incremental`
-	image_variant=`getprop ro.product.name`
-	image_variant+="-"
-	image_variant+=`getprop ro.build.type`
-	oem_version=`getprop ro.build.version.codename`
-	echo 10 > /sys/devices/soc0/select_image
-	echo $image_version > /sys/devices/soc0/image_version
-	echo $image_variant > /sys/devices/soc0/image_variant
-	echo $oem_version > /sys/devices/soc0/image_crm_version
-fi
-
-# Change console log level as per console config property
-console_config=`getprop persist.vendor.console.silent.config`
-case "$console_config" in
-	"1")
-		echo "Enable console config to $console_config"
-		echo 0 > /proc/sys/kernel/printk
-	;;
-	*)
-		echo "Enable console config to $console_config"
-	;;
-esac
-
-setprop vendor.post_boot.parsed 1
diff --git a/rootdir/bin/init.kernel.post_boot-shima.sh b/rootdir/bin/init.kernel.post_boot-shima.sh
deleted file mode 100755
index 59eb877..0000000
--- a/rootdir/bin/init.kernel.post_boot-shima.sh
+++ /dev/null
@@ -1,387 +0,0 @@
-#=============================================================================
-# Copyright (c) 2020-2021 Qualcomm Technologies, Inc.
-# All Rights Reserved.
-# Confidential and Proprietary - Qualcomm Technologies, Inc.
-#
-# Copyright (c) 2009-2012, 2014-2019, The Linux Foundation. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-#     * Redistributions of source code must retain the above copyright
-#       notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright
-#       notice, this list of conditions and the following disclaimer in the
-#       documentation and/or other materials provided with the distribution.
-#     * Neither the name of The Linux Foundation nor
-#       the names of its contributors may be used to endorse or promote
-#       products derived from this software without specific prior written
-#       permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-# NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#=============================================================================
-
-function configure_zram_parameters() {
-	MemTotalStr=`cat /proc/meminfo | grep MemTotal`
-	MemTotal=${MemTotalStr:16:8}
-
-	low_ram=`getprop ro.config.low_ram`
-
-	# Zram disk - 75% for Go and < 2GB devices .
-	# For >2GB Non-Go devices, size = 50% of RAM size. Limit the size to 4GB.
-	# And enable lz4 zram compression for Go targets.
-
-	let RamSizeGB="( $MemTotal / 1048576 ) + 1"
-	diskSizeUnit=M
-	if [ $RamSizeGB -le 2 ]; then
-		let zRamSizeMB="( $RamSizeGB * 1024 ) * 3 / 4"
-	else
-		let zRamSizeMB="( $RamSizeGB * 1024 ) / 2"
-	fi
-
-	# use MB avoid 32 bit overflow
-	if [ $zRamSizeMB -gt 4096 ]; then
-		let zRamSizeMB=4096
-	fi
-
-	if [ "$low_ram" == "true" ]; then
-		echo lz4 > /sys/block/zram0/comp_algorithm
-	fi
-
-	if [ -f /sys/block/zram0/disksize ]; then
-		if [ -f /sys/block/zram0/use_dedup ]; then
-			echo 1 > /sys/block/zram0/use_dedup
-		fi
-		echo "$zRamSizeMB""$diskSizeUnit" > /sys/block/zram0/disksize
-
-		# ZRAM may use more memory than it saves if SLAB_STORE_USER
-		# debug option is enabled.
-		if [ -e /sys/kernel/slab/zs_handle ]; then
-			echo 0 > /sys/kernel/slab/zs_handle/store_user
-		fi
-		if [ -e /sys/kernel/slab/zspage ]; then
-			echo 0 > /sys/kernel/slab/zspage/store_user
-		fi
-
-		mkswap /dev/block/zram0
-		swapon /dev/block/zram0 -p 32758
-	fi
-}
-
-function configure_read_ahead_kb_values() {
-	MemTotalStr=`cat /proc/meminfo | grep MemTotal`
-	MemTotal=${MemTotalStr:16:8}
-
-	dmpts=$(ls /sys/block/*/queue/read_ahead_kb | grep -e dm -e mmc)
-
-	# Set 128 for <= 3GB &
-	# set 512 for >= 4GB targets.
-	if [ $MemTotal -le 3145728 ]; then
-		ra_kb=128
-	else
-		ra_kb=512
-	fi
-	if [ -f /sys/block/mmcblk0/bdi/read_ahead_kb ]; then
-		echo $ra_kb > /sys/block/mmcblk0/bdi/read_ahead_kb
-	fi
-	if [ -f /sys/block/mmcblk0rpmb/bdi/read_ahead_kb ]; then
-		echo $ra_kb > /sys/block/mmcblk0rpmb/bdi/read_ahead_kb
-	fi
-	for dm in $dmpts; do
-		echo $ra_kb > $dm
-	done
-}
-
-function configure_memory_parameters() {
-	# Set Memory parameters.
-	#
-	# Set per_process_reclaim tuning parameters
-	# All targets will use vmpressure range 50-70,
-	# All targets will use 512 pages swap size.
-	#
-	# Set Low memory killer minfree parameters
-	# 32 bit Non-Go, all memory configurations will use 15K series
-	# 32 bit Go, all memory configurations will use uLMK + Memcg
-	# 64 bit will use Google default LMK series.
-	#
-	# Set ALMK parameters (usually above the highest minfree values)
-	# vmpressure_file_min threshold is always set slightly higher
-	# than LMK minfree's last bin value for all targets. It is calculated as
-	# vmpressure_file_min = (last bin - second last bin ) + last bin
-	#
-	# Set allocstall_threshold to 0 for all targets.
-	#
-
-	ProductName=`getprop ro.product.name`
-
-	configure_zram_parameters
-	configure_read_ahead_kb_values
-	echo 100 > /proc/sys/vm/swappiness
-
-        # Disable wsf  beacause we are using efk.
-        # wsf Range : 1..1000. So set to bare minimum value 1.
-        echo 1 > /proc/sys/vm/watermark_scale_factor
-
-	#Spawn 2 kswapd threads which can help in fast reclaiming of pages
-	echo 2 > /proc/sys/vm/kswapd_threads
-}
-
-rev=`cat /sys/devices/soc0/revision`
-ddr_type=`od -An -tx /proc/device-tree/memory/ddr_device_type`
-ddr_type4="07"
-ddr_type5="08"
-
-# Core control parameters for gold
-echo 2 > /sys/devices/system/cpu/cpu4/core_ctl/min_cpus
-echo 60 > /sys/devices/system/cpu/cpu4/core_ctl/busy_up_thres
-echo 30 > /sys/devices/system/cpu/cpu4/core_ctl/busy_down_thres
-echo 100 > /sys/devices/system/cpu/cpu4/core_ctl/offline_delay_ms
-echo 3 > /sys/devices/system/cpu/cpu4/core_ctl/task_thres
-
-# Core control parameters for gold+
-echo 0 > /sys/devices/system/cpu/cpu7/core_ctl/min_cpus
-echo 60 > /sys/devices/system/cpu/cpu7/core_ctl/busy_up_thres
-echo 30 > /sys/devices/system/cpu/cpu7/core_ctl/busy_down_thres
-echo 100 > /sys/devices/system/cpu/cpu7/core_ctl/offline_delay_ms
-echo 1 > /sys/devices/system/cpu/cpu7/core_ctl/task_thres
-
-# Controls how many more tasks should be eligible to run on gold CPUs
-# w.r.t number of gold CPUs available to trigger assist (max number of
-# tasks eligible to run on previous cluster minus number of CPUs in
-# the previous cluster).
-#
-# Setting to 1 by default which means there should be at least
-# 4 tasks eligible to run on gold cluster (tasks running on gold cores
-# plus misfit tasks on silver cores) to trigger assitance from gold+.
-echo 1 > /sys/devices/system/cpu/cpu7/core_ctl/nr_prev_assist_thresh
-
-# Disable Core control on silver
-echo 0 > /sys/devices/system/cpu/cpu0/core_ctl/enable
-
-# Setting b.L scheduler parameters
-echo 71 95 > /proc/sys/kernel/sched_upmigrate
-echo 65 85 > /proc/sys/kernel/sched_downmigrate
-echo 100 > /proc/sys/kernel/sched_group_upmigrate
-echo 85 > /proc/sys/kernel/sched_group_downmigrate
-echo 1 > /proc/sys/kernel/sched_walt_rotate_big_tasks
-
-
-echo 0 > /proc/sys/kernel/sched_coloc_busy_hysteresis_enable_cpus
-
-# cpuset parameters
-echo 0-3 > /dev/cpuset/background/cpus
-echo 0-3 > /dev/cpuset/system-background/cpus
-
-# Turn off scheduler boost at the end
-echo 0 > /proc/sys/kernel/sched_boost
-
-# configure governor settings for silver cluster
-echo "schedutil" > /sys/devices/system/cpu/cpufreq/policy0/scaling_governor
-echo 0 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/down_rate_limit_us
-echo 0 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/up_rate_limit_us
-echo 1171200 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/hispeed_freq
-echo 691200 > /sys/devices/system/cpu/cpufreq/policy0/scaling_min_freq
-echo 0 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/pl
-
-# configure input boost settings
-echo "0:1171200" > /sys/devices/system/cpu/cpu_boost/input_boost_freq
-echo 120 > /sys/devices/system/cpu/cpu_boost/input_boost_ms
-
-# configure governor settings for gold cluster
-echo "schedutil" > /sys/devices/system/cpu/cpufreq/policy4/scaling_governor
-echo 0 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/down_rate_limit_us
-echo 0 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/up_rate_limit_us
-echo 1209000 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/hispeed_freq
-echo 691200 > /sys/devices/system/cpu/cpufreq/policy4/scaling_min_freq
-echo 85 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/hispeed_load
-echo -6 > /sys/devices/system/cpu/cpu4/sched_load_boost
-echo -6 > /sys/devices/system/cpu/cpu5/sched_load_boost
-echo -6 > /sys/devices/system/cpu/cpu6/sched_load_boost
-echo 0 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/rtg_boost_freq
-echo 0 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/pl
-
-# configure governor settings for gold+ cluster
-echo "schedutil" > /sys/devices/system/cpu/cpufreq/policy7/scaling_governor
-echo 0 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/down_rate_limit_us
-echo 0 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/up_rate_limit_us
-echo 1267000 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/hispeed_freq
-echo 806400 > /sys/devices/system/cpu/cpufreq/policy7/scaling_min_freq
-echo 85 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/hispeed_load
-echo -6 > /sys/devices/system/cpu/cpu7/sched_load_boost
-echo 0 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/rtg_boost_freq
-echo 0 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/pl
-
-# colocation V3 settings
-echo 691200 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/rtg_boost_freq
-echo 51 > /proc/sys/kernel/sched_min_task_util_for_boost
-echo 35 > /proc/sys/kernel/sched_min_task_util_for_colocation
-echo 20000000 > /proc/sys/kernel/sched_task_unfilter_period
-
-# Enable conservative pl
-echo 1 > /proc/sys/kernel/sched_conservative_pl
-
-# configure bus-dcvs
-for device in /sys/devices/platform/soc
-do
-	for cpubw in $device/*cpu-cpu-llcc-bw/devfreq/*cpu-cpu-llcc-bw
-	do
-		cat $cpubw/available_frequencies | cut -d " " -f 1 > $cpubw/min_freq
-		echo "2288 4577 7110 9155 12298 14236 15258" > $cpubw/bw_hwmon/mbps_zones
-		echo 4 > $cpubw/bw_hwmon/sample_ms
-		echo 68 > $cpubw/bw_hwmon/io_percent
-		echo 20 > $cpubw/bw_hwmon/hist_memory
-		echo 0 > $cpubw/bw_hwmon/hyst_length
-		echo 80 > $cpubw/bw_hwmon/down_thres
-		echo 0 > $cpubw/bw_hwmon/guard_band_mbps
-		echo 250 > $cpubw/bw_hwmon/up_scale
-		echo 1600 > $cpubw/bw_hwmon/idle_mbps
-		echo 40 > $cpubw/polling_interval
-	done
-
-	for llccbw in $device/*cpu-llcc-ddr-bw/devfreq/*cpu-llcc-ddr-bw
-	do
-		cat $llccbw/available_frequencies | cut -d " " -f 1 > $llccbw/min_freq
-		if [ ${ddr_type:4:2} == $ddr_type4 ]; then
-			echo "1144 1720 2086 2929 3879 5931 6515 8136" > $llccbw/bw_hwmon/mbps_zones
-		elif [ ${ddr_type:4:2} == $ddr_type5 ]; then
-			echo "1144 1720 2086 2929 3879 5931 6515 7980 12191" > $llccbw/bw_hwmon/mbps_zones
-		fi
-		echo 4 > $llccbw/bw_hwmon/sample_ms
-		echo 68 > $llccbw/bw_hwmon/io_percent
-		echo 20 > $llccbw/bw_hwmon/hist_memory
-		echo 0 > $llccbw/bw_hwmon/hyst_length
-		echo 80 > $llccbw/bw_hwmon/down_thres
-		echo 0 > $llccbw/bw_hwmon/guard_band_mbps
-		echo 250 > $llccbw/bw_hwmon/up_scale
-		echo 1600 > $llccbw/bw_hwmon/idle_mbps
-		echo 48 > $llccbw/polling_interval
-	done
-
-	for l3bw in $device/*snoop-l3-bw/devfreq/*snoop-l3-bw
-	do
-		cat $l3bw/available_frequencies | cut -d " " -f 1 > $l3bw/min_freq
-		echo 4 > $l3bw/bw_hwmon/sample_ms
-		echo 10 > $l3bw/bw_hwmon/io_percent
-		echo 20 > $l3bw/bw_hwmon/hist_memory
-		echo 10 > $l3bw/bw_hwmon/hyst_length
-		echo 0 > $l3bw/bw_hwmon/down_thres
-		echo 0 > $l3bw/bw_hwmon/guard_band_mbps
-		echo 0 > $l3bw/bw_hwmon/up_scale
-		echo 1600 > $l3bw/bw_hwmon/idle_mbps
-		echo 9155 > $l3bw/max_freq
-		echo 40 > $l3bw/polling_interval
-	done
-
-	# configure mem_latency settings for LLCC and DDR scaling and qoslat
-	for memlat in $device/*lat/devfreq/*lat
-	do
-		cat $memlat/available_frequencies | cut -d " " -f 1 > $memlat/min_freq
-		echo 8 > $memlat/polling_interval
-		echo 400 > $memlat/mem_latency/ratio_ceil
-	done
-
-	# configure compute settings for silver latfloor
-	for latfloor in $device/*cpu0-cpu*latfloor/devfreq/*cpu0-cpu*latfloor
-	do
-		cat $latfloor/available_frequencies | cut -d " " -f 1 > $latfloor/min_freq
-		echo 8 > $latfloor/polling_interval
-	done
-
-	# configure compute settings for gold latfloor
-	for latfloor in $device/*cpu4-cpu*latfloor/devfreq/*cpu4-cpu*latfloor
-	do
-		cat $latfloor/available_frequencies | cut -d " " -f 1 > $latfloor/min_freq
-		echo 8 > $latfloor/polling_interval
-	done
-
-        # configure mem_latency settings for prime latfloor
-	for latfloor in $device/*cpu7-cpu*latfloor/devfreq/*cpu7-cpu*latfloor
-	do
-		cat $latfloor/available_frequencies | cut -d " " -f 1 > $latfloor/min_freq
-		echo 8 > $latfloor/polling_interval
-		echo 25000 > $latfloor/mem_latency/ratio_ceil
-	done
-
-	# CPU4 L3 ratio ceil
-	for l3gold in $device/*cpu4-cpu-l3-lat/devfreq/*cpu4-cpu-l3-lat
-	do
-		echo 4000 > $l3gold/mem_latency/ratio_ceil
-                echo 25000 > $l3gold/mem_latency/wb_filter_ratio
-                echo 60 > $l3gold/mem_latency/wb_pct_thres
-	done
-
-	# CPU5 L3 ratio ceil
-	for l3gold in $device/*cpu5-cpu-l3-lat/devfreq/*cpu5-cpu-l3-lat
-	do
-		echo 4000 > $l3gold/mem_latency/ratio_ceil
-                echo 25000 > $l3gold/mem_latency/wb_filter_ratio
-                echo 60 > $l3gold/mem_latency/wb_pct_thres
-	done
-
-	# CPU6 L3 ratio ceil
-	for l3gold in $device/*cpu6-cpu-l3-lat/devfreq/*cpu6-cpu-l3-lat
-	do
-		echo 4000 > $l3gold/mem_latency/ratio_ceil
-                echo 25000 > $l3gold/mem_latency/wb_filter_ratio
-                echo 60 > $l3gold/mem_latency/wb_pct_thres
-	done
-
-	# prime L3 ratio ceil
-	for l3prime in $device/*cpu7-cpu-l3-lat/devfreq/*cpu7-cpu-l3-lat
-	do
-	    echo 20000 > $l3prime/mem_latency/ratio_ceil
-            echo 25000 > $l3prime/mem_latency/wb_filter_ratio
-            echo 60 > $l3prime/mem_latency/wb_pct_thres
-	done
-
-	# qoslat ratio ceil
-	for qoslat in $device/*qoslat/devfreq/*qoslat
-	do
-	    echo 50 > $qoslat/mem_latency/ratio_ceil
-	done
-done
-
-#Enable sleep and set s2idle as default suspend mode
-echo N > /sys/module/lpm_levels/parameters/sleep_disabled
-echo s2idle > /sys/power/mem_sleep
-
-configure_memory_parameters
-
-# Let kernel know our image version/variant/crm_version
-if [ -f /sys/devices/soc0/select_image ]; then
-	image_version="10:"
-	image_version+=`getprop ro.build.id`
-	image_version+=":"
-	image_version+=`getprop ro.build.version.incremental`
-	image_variant=`getprop ro.product.name`
-	image_variant+="-"
-	image_variant+=`getprop ro.build.type`
-	oem_version=`getprop ro.build.version.codename`
-	echo 10 > /sys/devices/soc0/select_image
-	echo $image_version > /sys/devices/soc0/image_version
-	echo $image_variant > /sys/devices/soc0/image_variant
-	echo $oem_version > /sys/devices/soc0/image_crm_version
-fi
-
-# Change console log level as per console config property
-console_config=`getprop persist.console.silent.config`
-case "$console_config" in
-	"1")
-		echo "Enable console config to $console_config"
-		echo 0 > /proc/sys/kernel/printk
-	;;
-	*)
-		echo "Enable console config to $console_config"
-	;;
-esac
-
-setprop vendor.post_boot.parsed 1
diff --git a/rootdir/bin/init.kernel.post_boot-yupik.sh b/rootdir/bin/init.kernel.post_boot-yupik.sh
deleted file mode 100755
index 13dc640..0000000
--- a/rootdir/bin/init.kernel.post_boot-yupik.sh
+++ /dev/null
@@ -1,364 +0,0 @@
-#=============================================================================
-# Copyright (c) 2020-2021 Qualcomm Technologies, Inc.
-# All Rights Reserved.
-# Confidential and Proprietary - Qualcomm Technologies, Inc.
-#
-# Copyright (c) 2009-2012, 2014-2019, The Linux Foundation. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-#     * Redistributions of source code must retain the above copyright
-#       notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright
-#       notice, this list of conditions and the following disclaimer in the
-#       documentation and/or other materials provided with the distribution.
-#     * Neither the name of The Linux Foundation nor
-#       the names of its contributors may be used to endorse or promote
-#       products derived from this software without specific prior written
-#       permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-# NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#=============================================================================
-
-function configure_zram_parameters() {
-	# Moto yangbq2: Skip this if we are using zram from fstab.
-	using_zram_from_fstab=`getprop ro.boot.using_zram_from_fstab`
-	if [ "$using_zram_from_fstab" == "true" ]; then
-		return
-	fi
-	MemTotalStr=`cat /proc/meminfo | grep MemTotal`
-	MemTotal=${MemTotalStr:16:8}
-
-	low_ram=`getprop ro.config.low_ram`
-
-	# Zram disk - 75% for Go and < 2GB devices .
-	# For >2GB Non-Go devices, size = 50% of RAM size. Limit the size to 4GB.
-	# And enable lz4 zram compression for Go targets.
-
-	let RamSizeGB="( $MemTotal / 1048576 ) + 1"
-	diskSizeUnit=M
-	if [ $RamSizeGB -le 2 ]; then
-		let zRamSizeMB="( $RamSizeGB * 1024 ) * 3 / 4"
-	else
-		let zRamSizeMB="( $RamSizeGB * 1024 ) / 2"
-	fi
-
-	# use MB avoid 32 bit overflow
-	if [ $zRamSizeMB -gt 4096 ]; then
-		let zRamSizeMB=4096
-	fi
-
-	if [ "$low_ram" == "true" ]; then
-		echo lz4 > /sys/block/zram0/comp_algorithm
-	fi
-
-	if [ -f /sys/block/zram0/disksize ]; then
-		if [ -f /sys/block/zram0/use_dedup ]; then
-			echo 1 > /sys/block/zram0/use_dedup
-		fi
-		echo "$zRamSizeMB""$diskSizeUnit" > /sys/block/zram0/disksize
-
-		# ZRAM may use more memory than it saves if SLAB_STORE_USER
-		# debug option is enabled.
-		if [ -e /sys/kernel/slab/zs_handle ]; then
-			echo 0 > /sys/kernel/slab/zs_handle/store_user
-		fi
-		if [ -e /sys/kernel/slab/zspage ]; then
-			echo 0 > /sys/kernel/slab/zspage/store_user
-		fi
-
-		mkswap /dev/block/zram0
-		swapon /dev/block/zram0 -p 32758
-	fi
-}
-
-function configure_read_ahead_kb_values() {
-	MemTotalStr=`cat /proc/meminfo | grep MemTotal`
-	MemTotal=${MemTotalStr:16:8}
-
-	dmpts=$(ls /sys/block/*/queue/read_ahead_kb | grep -e dm -e mmc)
-
-	# Set 128 for <= 3GB &
-	# set 512 for >= 4GB targets.
-	if [ $MemTotal -le 3145728 ]; then
-		ra_kb=128
-	else
-		ra_kb=512
-	fi
-	if [ -f /sys/block/mmcblk0/bdi/read_ahead_kb ]; then
-		echo $ra_kb > /sys/block/mmcblk0/bdi/read_ahead_kb
-	fi
-	if [ -f /sys/block/mmcblk0rpmb/bdi/read_ahead_kb ]; then
-		echo $ra_kb > /sys/block/mmcblk0rpmb/bdi/read_ahead_kb
-	fi
-	for dm in $dmpts; do
-		echo $ra_kb > $dm
-	done
-}
-
-function configure_memory_parameters() {
-	# Set Memory parameters.
-	#
-	# Set per_process_reclaim tuning parameters
-	# All targets will use vmpressure range 50-70,
-	# All targets will use 512 pages swap size.
-	#
-	# Set Low memory killer minfree parameters
-	# 32 bit Non-Go, all memory configurations will use 15K series
-	# 32 bit Go, all memory configurations will use uLMK + Memcg
-	# 64 bit will use Google default LMK series.
-	#
-	# Set ALMK parameters (usually above the highest minfree values)
-	# vmpressure_file_min threshold is always set slightly higher
-	# than LMK minfree's last bin value for all targets. It is calculated as
-	# vmpressure_file_min = (last bin - second last bin ) + last bin
-	#
-	# Set allocstall_threshold to 0 for all targets.
-	#
-
-	ProductName=`getprop ro.product.name`
-
-	configure_zram_parameters
-	configure_read_ahead_kb_values
-	echo 100 > /proc/sys/vm/swappiness
-
-        # Disable wsf  beacause we are using efk.
-        # wsf Range : 1..1000. So set to bare minimum value 1.
-        echo 1 > /proc/sys/vm/watermark_scale_factor
-
-	#Spawn 2 kswapd threads which can help in fast reclaiming of pages
-	#yangbq2 change kswapd threads to one thread
-	echo 1 > /proc/sys/vm/kswapd_threads
-	#yangbq2 disable watermark boost
-	echo 0 > /proc/sys/vm/watermark_boost_factor
-}
-
-rev=`cat /sys/devices/soc0/revision`
-ddr_type=`od -An -tx /proc/device-tree/memory/ddr_device_type`
-ddr_type4="07"
-ddr_type5="08"
-
-# Core control parameters for gold
-# Prefer CPU4 for isolation based on the thermal characteristics.
-echo 1 0 0 > /sys/devices/system/cpu/cpu4/core_ctl/not_preferred
-echo 2 > /sys/devices/system/cpu/cpu4/core_ctl/min_cpus
-echo 60 > /sys/devices/system/cpu/cpu4/core_ctl/busy_up_thres
-echo 30 > /sys/devices/system/cpu/cpu4/core_ctl/busy_down_thres
-echo 100 > /sys/devices/system/cpu/cpu4/core_ctl/offline_delay_ms
-echo 3 > /sys/devices/system/cpu/cpu4/core_ctl/task_thres
-
-# Core control parameters for gold+
-echo 0 > /sys/devices/system/cpu/cpu7/core_ctl/min_cpus
-echo 60 > /sys/devices/system/cpu/cpu7/core_ctl/busy_up_thres
-echo 30 > /sys/devices/system/cpu/cpu7/core_ctl/busy_down_thres
-echo 100 > /sys/devices/system/cpu/cpu7/core_ctl/offline_delay_ms
-echo 1 > /sys/devices/system/cpu/cpu7/core_ctl/task_thres
-
-# Controls how many more tasks should be eligible to run on gold CPUs
-# w.r.t number of gold CPUs available to trigger assist (max number of
-# tasks eligible to run on previous cluster minus number of CPUs in
-# the previous cluster).
-#
-# Setting to 1 by default which means there should be at least
-# 4 tasks eligible to run on gold cluster (tasks running on gold cores
-# plus misfit tasks on silver cores) to trigger assitance from gold+.
-echo 1 > /sys/devices/system/cpu/cpu7/core_ctl/nr_prev_assist_thresh
-
-# Disable Core control on silver
-echo 0 > /sys/devices/system/cpu/cpu0/core_ctl/enable
-
-# Setting b.L scheduler parameters
-echo 71 95 > /proc/sys/kernel/sched_upmigrate
-echo 65 85 > /proc/sys/kernel/sched_downmigrate
-echo 100 > /proc/sys/kernel/sched_group_upmigrate
-echo 85 > /proc/sys/kernel/sched_group_downmigrate
-echo 1 > /proc/sys/kernel/sched_walt_rotate_big_tasks
-
-
-echo 0 > /proc/sys/kernel/sched_coloc_busy_hysteresis_enable_cpus
-
-# cpuset parameters
-echo 0-3 > /dev/cpuset/background/cpus
-echo 0-3 > /dev/cpuset/system-background/cpus
-
-# Turn off scheduler boost at the end
-echo 0 > /proc/sys/kernel/sched_boost
-
-# configure governor settings for silver cluster
-echo "schedutil" > /sys/devices/system/cpu/cpufreq/policy0/scaling_governor
-echo 0 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/down_rate_limit_us
-echo 0 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/up_rate_limit_us
-echo 1152000 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/hispeed_freq
-echo 691200 > /sys/devices/system/cpu/cpufreq/policy0/scaling_min_freq
-echo 0 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/pl
-
-# configure input boost settings
-echo "0:1152000" > /sys/devices/system/cpu/cpu_boost/input_boost_freq
-echo 120 > /sys/devices/system/cpu/cpu_boost/input_boost_ms
-
-# configure governor settings for gold cluster
-echo "schedutil" > /sys/devices/system/cpu/cpufreq/policy4/scaling_governor
-echo 0 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/down_rate_limit_us
-echo 0 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/up_rate_limit_us
-echo 1228800 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/hispeed_freq
-echo 691200 > /sys/devices/system/cpu/cpufreq/policy4/scaling_min_freq
-echo 85 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/hispeed_load
-echo -6 > /sys/devices/system/cpu/cpu4/sched_load_boost
-echo -6 > /sys/devices/system/cpu/cpu5/sched_load_boost
-echo -6 > /sys/devices/system/cpu/cpu6/sched_load_boost
-echo 0 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/rtg_boost_freq
-echo 0 > /sys/devices/system/cpu/cpufreq/policy4/schedutil/pl
-
-# configure governor settings for gold+ cluster
-echo "schedutil" > /sys/devices/system/cpu/cpufreq/policy7/scaling_governor
-echo 0 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/down_rate_limit_us
-echo 0 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/up_rate_limit_us
-echo 1324800 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/hispeed_freq
-echo 806400 > /sys/devices/system/cpu/cpufreq/policy7/scaling_min_freq
-echo 85 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/hispeed_load
-echo -6 > /sys/devices/system/cpu/cpu7/sched_load_boost
-echo 0 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/rtg_boost_freq
-echo 0 > /sys/devices/system/cpu/cpufreq/policy7/schedutil/pl
-
-# colocation V3 settings
-echo 691200 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/rtg_boost_freq
-echo 51 > /proc/sys/kernel/sched_min_task_util_for_boost
-echo 35 > /proc/sys/kernel/sched_min_task_util_for_colocation
-echo 20000000 > /proc/sys/kernel/sched_task_unfilter_period
-
-# Enable conservative pl
-echo 1 > /proc/sys/kernel/sched_conservative_pl
-
-# configure RIMPS for L3 DCVS
-for c0_rimps_l3 in /sys/devices/system/cpu/memlat/c0_memlat/cpu0-cpu-l3-lat
-do
-	cat $c0_rimps_l3/available_frequencies | cut -d " " -f 1 > $c0_rimps_l3/min_freq
-	echo 400 > $c0_rimps_l3/ratio_ceil
-	echo 3 > $c0_rimps_l3/sample_ms
-done
-
-for c4_rimps_l3 in /sys/devices/system/cpu/memlat/c4_memlat/cpu4-cpu-l3-lat
-do
-	cat $c4_rimps_l3/available_frequencies | cut -d " " -f 1 > $c4_rimps_l3/min_freq
-	echo 4000 > $c4_rimps_l3/ratio_ceil
-	echo 3 > $c4_rimps_l3/sample_ms
-	echo 60 > $c4_rimps_l3/l2wb_pct
-	echo 25000 > $c4_rimps_l3/l2wb_filter
-done
-
-for c7_rimps_l3 in /sys/devices/system/cpu/memlat/c7_memlat/cpu7-cpu-l3-lat
-do
-	cat $c7_rimps_l3/available_frequencies | cut -d " " -f 1 > $c7_rimps_l3/min_freq
-	echo 20000 > $c7_rimps_l3/ratio_ceil
-	echo 3 > $c7_rimps_l3/sample_ms
-	echo 60 > $c7_rimps_l3/l2wb_pct
-	echo 25000 > $c7_rimps_l3/l2wb_filter
-done
-
-
-# configure bus-dcvs
-for device in /sys/devices/platform/soc
-do
-	for cpubw in $device/*cpu-cpu-llcc-bw/devfreq/*cpu-cpu-llcc-bw
-	do
-		cat $cpubw/available_frequencies | cut -d " " -f 1 > $cpubw/min_freq
-		echo "2288 4577 7110 9155 12298 14236 15258" > $cpubw/bw_hwmon/mbps_zones
-		echo 4 > $cpubw/bw_hwmon/sample_ms
-		echo 68 > $cpubw/bw_hwmon/io_percent
-		echo 20 > $cpubw/bw_hwmon/hist_memory
-		echo 0 > $cpubw/bw_hwmon/hyst_length
-		echo 80 > $cpubw/bw_hwmon/down_thres
-		echo 0 > $cpubw/bw_hwmon/guard_band_mbps
-		echo 250 > $cpubw/bw_hwmon/up_scale
-		echo 1600 > $cpubw/bw_hwmon/idle_mbps
-		echo 40 > $cpubw/polling_interval
-	done
-
-	for llccbw in $device/*cpu-llcc-ddr-bw/devfreq/*cpu-llcc-ddr-bw
-	do
-		cat $llccbw/available_frequencies | cut -d " " -f 1 > $llccbw/min_freq
-		if [ ${ddr_type:4:2} == $ddr_type4 ]; then
-			echo "1144 1720 2086 2929 3879 5931 6515 8136" > $llccbw/bw_hwmon/mbps_zones
-		elif [ ${ddr_type:4:2} == $ddr_type5 ]; then
-			echo "1144 1720 2086 2929 3879 5931 6515 7980 12191" > $llccbw/bw_hwmon/mbps_zones
-		fi
-		echo 4 > $llccbw/bw_hwmon/sample_ms
-		echo 68 > $llccbw/bw_hwmon/io_percent
-		echo 20 > $llccbw/bw_hwmon/hist_memory
-		echo 0 > $llccbw/bw_hwmon/hyst_length
-		echo 80 > $llccbw/bw_hwmon/down_thres
-		echo 0 > $llccbw/bw_hwmon/guard_band_mbps
-		echo 250 > $llccbw/bw_hwmon/up_scale
-		echo 1600 > $llccbw/bw_hwmon/idle_mbps
-		echo 48 > $llccbw/polling_interval
-	done
-
-	for l3bw in $device/*snoop-l3-bw/devfreq/*snoop-l3-bw
-	do
-		cat $l3bw/available_frequencies | cut -d " " -f 1 > $l3bw/min_freq
-		echo 4 > $l3bw/bw_hwmon/sample_ms
-		echo 10 > $l3bw/bw_hwmon/io_percent
-		echo 20 > $l3bw/bw_hwmon/hist_memory
-		echo 10 > $l3bw/bw_hwmon/hyst_length
-		echo 0 > $l3bw/bw_hwmon/down_thres
-		echo 0 > $l3bw/bw_hwmon/guard_band_mbps
-		echo 0 > $l3bw/bw_hwmon/up_scale
-		echo 1600 > $l3bw/bw_hwmon/idle_mbps
-		echo 9155 > $l3bw/max_freq
-		echo 40 > $l3bw/polling_interval
-	done
-
-	# configure mem_latency settings for LLCC and DDR scaling and qoslat
-	for memlat in $device/*lat/devfreq/*lat
-	do
-		cat $memlat/available_frequencies | cut -d " " -f 1 > $memlat/min_freq
-		echo 8 > $memlat/polling_interval
-		echo 400 > $memlat/mem_latency/ratio_ceil
-	done
-
-	# configure compute settings for silver latfloor
-	for latfloor in $device/*cpu0-cpu*latfloor/devfreq/*cpu0-cpu*latfloor
-	do
-		cat $latfloor/available_frequencies | cut -d " " -f 1 > $latfloor/min_freq
-		echo 8 > $latfloor/polling_interval
-	done
-
-	# configure compute settings for gold latfloor
-	for latfloor in $device/*cpu4-cpu*latfloor/devfreq/*cpu4-cpu*latfloor
-	do
-		cat $latfloor/available_frequencies | cut -d " " -f 1 > $latfloor/min_freq
-		echo 8 > $latfloor/polling_interval
-	done
-
-        # configure mem_latency settings for prime latfloor
-	for latfloor in $device/*cpu7-cpu*latfloor/devfreq/*cpu7-cpu*latfloor
-	do
-		cat $latfloor/available_frequencies | cut -d " " -f 1 > $latfloor/min_freq
-		echo 8 > $latfloor/polling_interval
-		echo 25000 > $latfloor/mem_latency/ratio_ceil
-	done
-
-	# qoslat ratio ceil
-	for qoslat in $device/*qoslat/devfreq/*qoslat
-	do
-	    echo 50 > $qoslat/mem_latency/ratio_ceil
-	done
-done
-
-#Enable sleep and set s2idle as default suspend mode
-echo N > /sys/module/lpm_levels/parameters/sleep_disabled
-echo s2idle > /sys/power/mem_sleep
-
-configure_memory_parameters
-
-setprop vendor.post_boot.parsed 1
diff --git a/rootdir/bin/init.kernel.post_boot.sh b/rootdir/bin/init.kernel.post_boot.sh
deleted file mode 100755
index b855bfe..0000000
--- a/rootdir/bin/init.kernel.post_boot.sh
+++ /dev/null
@@ -1,52 +0,0 @@
-#=============================================================================
-# Copyright (c) 2019-2021 Qualcomm Technologies, Inc.
-# All Rights Reserved.
-# Confidential and Proprietary - Qualcomm Technologies, Inc.
-#
-# Copyright (c) 2009-2012, 2014-2019, The Linux Foundation. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-#     * Redistributions of source code must retain the above copyright
-#       notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright
-#       notice, this list of conditions and the following disclaimer in the
-#       documentation and/or other materials provided with the distribution.
-#     * Neither the name of The Linux Foundation nor
-#       the names of its contributors may be used to endorse or promote
-#       products derived from this software without specific prior written
-#       permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-# NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#=============================================================================
-
-if [ -f /sys/devices/soc0/soc_id ]; then
-	platformid=`cat /sys/devices/soc0/soc_id`
-fi
-
-case "$platformid" in
-    "415"|"439"|"456"|"501"|"502")
-	/vendor/bin/sh /vendor/bin/init.kernel.post_boot-lahaina.sh
-	;;
-
-    "450")
-	/vendor/bin/sh /vendor/bin/init.kernel.post_boot-shima.sh
-	;;
-    "475"|"499"|"487"|"488"|"498"|"497"|"515")
-	/vendor/bin/sh /vendor/bin/init.kernel.post_boot-yupik.sh
-	;;
-     *)
-	echo "***WARNING***: Invalid SoC ID\n\t No postboot settings applied!!\n"
-	;;
-esac
-
diff --git a/rootdir/bin/init.qcom.sensors.sh b/rootdir/bin/init.qcom.sensors.sh
deleted file mode 100755
index dcc0556..0000000
--- a/rootdir/bin/init.qcom.sensors.sh
+++ /dev/null
@@ -1,33 +0,0 @@
-#!/vendor/bin/sh
-# Copyright (c) 2020 The Linux Foundation. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-#     * Redistributions of source code must retain the above copyright
-#       notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright
-#       notice, this list of conditions and the following disclaimer in the
-#       documentation and/or other materials provided with the distribution.
-#     * Neither the name of The Linux Foundation nor
-#       the names of its contributors may be used to endorse or promote
-#       products derived from this software without specific prior written
-#       permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-# NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-#
-# Function to start sensors for SSC enabled platforms
-#
-cp /vendor/etc/sensors/scripts/* /data/vendor/sensors/scripts/
-chmod a+rw /data/vendor/sensors/scripts/*
diff --git a/rootdir/bin/init.qti.chg_policy.sh b/rootdir/bin/init.qti.chg_policy.sh
deleted file mode 100755
index fe679b3..0000000
--- a/rootdir/bin/init.qti.chg_policy.sh
+++ /dev/null
@@ -1,48 +0,0 @@
-#! /vendor/bin/sh
-
-#
-# Copyright (c) 2019-2021 Qualcomm Technologies, Inc.
-# All Rights Reserved.
-# Confidential and Proprietary - Qualcomm Technologies, Inc.
-#
-# Copyright (c) 2019 The Linux Foundation. All rights reserved.
-#
-
-export PATH=/vendor/bin
-
-soc_id=`getprop ro.vendor.qti.soc_id`
-if [ "$soc_id" -eq 415 ] || [ "$soc_id" -eq 439 ] || [ "$soc_id" -eq 450 ] || [ "$soc_id" -eq 475 ] || [ "$soc_id" -eq 497 ] || [ "$soc_id" -eq 498 ] || [ "$soc_id" -eq 499 ] || [ "$soc_id" -eq 515 ]; then
-    setprop persist.vendor.hvdcp_opti.start 2
-    exit 0
-fi
-
-if [ "$soc_id" -eq 441 ] || [ "$soc_id" -eq 471 ]; then
-	#Scuba does not support usb-pd or charge pumps
-	find /sys/class/power_supply/battery/ -type f  -maxdepth 1 | xargs chown system.system
-	find /sys/class/power_supply/bms/ -type f -maxdepth 1 | xargs chown system.system
-	find /sys/class/power_supply/main/ -type f -maxdepth 1 | xargs chown system.system
-	find /sys/class/power_supply/usb/ -type f -maxdepth 1 | xargs chown system.system
-else
-	find /sys/class/power_supply/battery/ -type f -maxdepth 1 | xargs chown system.system
-	find /sys/class/power_supply/bms/ -type f -maxdepth 1 | xargs chown system.system
-	find /sys/class/power_supply/main/ -type f -maxdepth 1 | xargs chown system.system
-	find /sys/class/power_supply/usb/ -type f -maxdepth 1 | xargs chown system.system
-	find /sys/class/power_supply/charge_pump_master/ -type f -maxdepth 1 | xargs chown system.system
-	find /sys/class/power_supply/pc_port/ -type f -maxdepth 1 | xargs chown system.system
-	find /sys/class/power_supply/dc/ -type f -maxdepth 1 | xargs chown system.system
-	find /sys/class/power_supply/parallel/ -type f -maxdepth 1 | xargs chown system.system
-	find /sys/class/usbpd/usbpd0/ -type f -maxdepth 1 | xargs chown system.system
-	find /sys/class/qc-vdm/ -type f -maxdepth 1 | xargs chown system.system
-	find /sys/class/charge_pump/ -type f -maxdepth 1 | xargs chown system.system
-	find /sys/class/qcom-battery/ -type f -maxdepth 1 | xargs chown system.system
-
-	for i in 0 1 2 3 4 5 6 7 8 9
-	do
-		devname=`cat /sys/bus/iio/devices/iio:device$i/name`
-		if [[ "$devname" == *smb* ]] || [[ "$devname" == *qg* ]] || [[ "$devname" == *div2_cp* ]] || [[ "$devname" == *div2-cp* ]]; then
-			find /sys/bus/iio/devices/iio:device$i/ -type f -maxdepth 1 | xargs chown system.system
-		fi
-	done
-fi
-
-setprop persist.vendor.hvdcp_opti.start 1
diff --git a/rootdir/bin/init.qti.kernel.sh b/rootdir/bin/init.qti.kernel.sh
deleted file mode 100755
index 404e27b..0000000
--- a/rootdir/bin/init.qti.kernel.sh
+++ /dev/null
@@ -1,56 +0,0 @@
-#! /vendor/bin/sh
-#=============================================================================
-# Copyright (c) 2019-2020 Qualcomm Technologies, Inc.
-# All Rights Reserved.
-# Confidential and Proprietary - Qualcomm Technologies, Inc.
-#
-# Copyright (c) 2009-2012, 2014-2019, The Linux Foundation. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-#     * Redistributions of source code must retain the above copyright
-#       notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright
-#       notice, this list of conditions and the following disclaimer in the
-#       documentation and/or other materials provided with the distribution.
-#     * Neither the name of The Linux Foundation nor
-#       the names of its contributors may be used to endorse or promote
-#       products derived from this software without specific prior written
-#       permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-# NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#=============================================================================
-
-verify_pasr_support()
-{
-	ddr_type=`od -An -tx /proc/device-tree/memory/ddr_device_type`
-	ddr_type5="08"
-
-         if [ -d /sys/kernel/mem-offline ]; then
-		#only LPDDR5 supports PAAR
-		if [ ${ddr_type:4:2} != $ddr_type5 ]; then
-			setprop vendor.pasr.activemode.enabled false
-		fi
-
-                setprop vendor.pasr.enabled true
-         fi
-}
-
-start_msm_irqbalance()
-{
-         if [ -f /vendor/bin/msm_irqbalance ]; then
-                start vendor.msm_irqbalance
-         fi
-}
-start_msm_irqbalance
-verify_pasr_support
diff --git a/rootdir/bin/init.qti.qcv.sh b/rootdir/bin/init.qti.qcv.sh
deleted file mode 100755
index b6891e3..0000000
--- a/rootdir/bin/init.qti.qcv.sh
+++ /dev/null
@@ -1,27 +0,0 @@
-#! /vendor/bin/sh
-#=============================================================================
-# Copyright (c) 2020-21 Qualcomm Technologies, Inc.
-# All Rights Reserved.
-# Confidential and Proprietary - Qualcomm Technologies, Inc.
-#=============================================================================
-
-soc_id=`cat /sys/devices/soc0/soc_id` 2> /dev/null
-
-# Store soc_id in ro.vendor.qti.soc_id
-setprop ro.vendor.qti.soc_id $soc_id
-
-# For chipsets in QCV family, convert soc_id to soc_name
-# and store it in ro.vendor.qti.soc_name.
-if [ "$soc_id" -eq 415 ] || [ "$soc_id" -eq 439 ] || [ "$soc_id" -eq 456 ] ||
-   [ "$soc_id" -eq 501 ] || [ "$soc_id" -eq 502 ]; then
-    setprop ro.vendor.qti.soc_name lahaina
-    setprop ro.vendor.qti.soc_model SM8350
-elif [ "$soc_id" -eq 450 ]; then
-    setprop ro.vendor.qti.soc_name shima
-    setprop ro.vendor.qti.soc_model SM7350
-elif [ "$soc_id" -eq 475 ] || [ "$soc_id" -eq 499 ] ||
-     [ "$soc_id" -eq 497 ] || [ "$soc_id" -eq 498 ] ||
-     [ "$soc_id" -eq 515 ]; then
-    setprop ro.vendor.qti.soc_name yupik
-    setprop ro.vendor.qti.soc_model SM7325
-fi
diff --git a/rootdir/bin/vendor_modprobe.sh b/rootdir/bin/vendor_modprobe.sh
deleted file mode 100755
index cb54050..0000000
--- a/rootdir/bin/vendor_modprobe.sh
+++ /dev/null
@@ -1,38 +0,0 @@
-#! /vendor/bin/sh
-#=============================================================================
-# Copyright (c) 2019-2020 Qualcomm Technologies, Inc.
-# All Rights Reserved.
-# Confidential and Proprietary - Qualcomm Technologies, Inc.
-#=============================================================================
-
-#default to /vendor/lib/modules
-MODULES_PATH="/vendor/lib/modules/"
-GKI_MOD_PATH="/vendor/lib/modules/5.4-gki"
-
-MODPROBE="/vendor/bin/modprobe"
-MODULES=`${MODPROBE} -d ${MODULES_PATH} -l`
-
-# Find the first non-blacklisted module and try
-# inserting it. If insertion fails the module is not
-# compatible with the current kernel. Change the modules
-# directory to gki.
-for MODULE in ${MODULES}; do
-	cat ${MODULES_PATH}/modules.blocklist | grep $MODULE
-	if [ $? -ne 0 ]; then
-		break
-	fi
-done
-
-${MODPROBE} -a -b -d ${MODULES_PATH} ${MODULE}
-if [ $? -ne 0 ];then
-	MODULES_PATH=$GKI_MOD_PATH
-	MODULES=`${MODPROBE} -d ${MODULES_PATH} -l`
-fi
-
-# Iterate over module list and modprobe them in background.
-for MODULE in ${MODULES}; do
-	${MODPROBE} -a -b -d ${MODULES_PATH} ${MODULE} &
-done
-
-# Wait until all the modprobes are finished
-wait
diff --git a/rootdir/etc/init/hw/init.qti.kernel.rc b/rootdir/etc/init/hw/init.qti.kernel.rc
deleted file mode 100644
index d81da2e..0000000
--- a/rootdir/etc/init/hw/init.qti.kernel.rc
+++ /dev/null
@@ -1,174 +0,0 @@
-#=============================================================================
-# Copyright (c) 2019-2021 Qualcomm Technologies, Inc.
-# All Rights Reserved.
-# Confidential and Proprietary - Qualcomm Technologies, Inc.
-#
-# Copyright (c) 2009-2012, 2014-2019, The Linux Foundation. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-#     * Redistributions of source code must retain the above copyright
-#       notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright
-#       notice, this list of conditions and the following disclaimer in the
-#       documentation and/or other materials provided with the distribution.
-#     * Neither the name of The Linux Foundation nor
-#       the names of its contributors may be used to endorse or promote
-#       products derived from this software without specific prior written
-#       permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-# NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#=============================================================================
-
-on early-init
-    mount debugfs debugfs /sys/kernel/debug
-    chmod 0755 /sys/kernel/debug
-
-    # Mount tracefs in /sys/kernel/tracing as CONFIG_DEBUG_FS might be
-    # disabled and /sys/kernel/debug/tracing might not be available
-    mount tracefs tracefs /sys/kernel/tracing
-    chmod 0755 /sys/kernel/tracing
-
-    chown root system /dev/kmsg
-    chmod 0620 /dev/kmsg
-
-    write /proc/sys/kernel/sched_boost 1
-
-    write /proc/sys/kernel/firmware_config/force_sysfs_fallback 1
-
-on init
-    # Create cgroup mount point for memory
-    mkdir /sys/fs/cgroup/memory/bg 0750 root system
-    write /sys/fs/cgroup/memory/bg/memory.swappiness 140
-    write /sys/fs/cgroup/memory/bg/memory.move_charge_at_immigrate 1
-    chown root system /sys/fs/cgroup/memory/bg/tasks
-    chmod 0660 /sys/fs/cgroup/memory/bg/tasks
-
-    # update scheduler tunables
-    write /dev/cpuctl/foreground/cpu.uclamp.sched_boost_no_override 1
-    write /dev/cpuctl/top-app/cpu.uclamp.sched_boost_no_override 1
-    write /dev/cpuctl/background/cpu.uclamp.colocate 0
-    write /dev/cpuctl/foreground/cpu.uclamp.colocate 0
-    write /dev/cpuctl/top-app/cpu.uclamp.colocate 1
-
-on post-fs
-    chmod 0755 /sys/kernel/debug/tracing
-
-    # set aggressive read ahead for dm-0 and dm-1 during boot up
-    write /sys/block/dm-0/queue/read_ahead_kb 2048
-    write /sys/block/dm-1/queue/read_ahead_kb 2048
-    write /sys/block/dm-2/queue/read_ahead_kb 2048
-
-on early-boot
-    # Allow subsystem (modem etc) debugging
-    write /sys/kernel/boot_adsp/boot 1
-    write /sys/kernel/boot_cdsp/boot 1
-    write /sys/kernel/boot_slpi/boot 1
-    write /sys/devices/virtual/cvp/cvp/boot 1
-
-on boot
-    # Set the console loglevel to < KERN_WARN
-    # Set the default message loglevel to KERN_INFO
-    write /proc/sys/kernel/printk "4 6 1 7"
-
-    # Allow access to emmc rawdump block partition and dload sysfs node
-    chown root system /dev/block/bootdevice/by-name/rawdump
-    chmod 0660 /dev/block/bootdevice/by-name/rawdump
-    chown root system /sys/kernel/dload/emmc_dload
-    chmod 0660 /sys/kernel/dload/emmc_dload
-    chown root system /dev/block/bootdevice/by-name/ramdump
-    chmod 0660 /dev/block/bootdevice/by-name/ramdump
-    chown root system /sys/kernel/dload/dload_mode
-    chmod 0660 /sys/kernel/dload/dload_mode
-
-    # set the io-scheduler to bfq on all mq support devices
-    write /sys/block/sda/queue/scheduler bfq
-    write /sys/block/sdb/queue/scheduler bfq
-    write /sys/block/sdc/queue/scheduler bfq
-    write /sys/block/sdd/queue/scheduler bfq
-    write /sys/block/sde/queue/scheduler bfq
-    write /sys/block/sdf/queue/scheduler bfq
-    write /sys/block/sdg/queue/scheduler bfq
-    write /sys/block/sdh/queue/scheduler bfq
-    write /sys/class/block/mmcblk0/queue/scheduler bfq
-    write /sys/class/block/mmcblk1/queue/scheduler bfq
-
-    # update io-scheduler tunables
-    write /sys/block/sda/queue/iosched/slice_idle 0
-    write /sys/block/sdb/queue/iosched/slice_idle 0
-    write /sys/block/sdc/queue/iosched/slice_idle 0
-    write /sys/block/sdd/queue/iosched/slice_idle 0
-    write /sys/block/sde/queue/iosched/slice_idle 0
-    write /sys/block/sdf/queue/iosched/slice_idle 0
-    write /sys/block/sdg/queue/iosched/slice_idle 0
-    write /sys/block/sdh/queue/iosched/slice_idle 0
-    write /sys/class/block/mmcblk0/queue/iosched/slice_idle 0
-    write /sys/class/block/mmcblk1/queue/iosched/slice_idle 0
-
-on post-fs-data
-    # Create directory used for dump collection
-    mkdir /data/vendor/ssrdump 0770 root system
-
-on property:persist.sys.ssr.enable_debug=*
-    write /sys/module/subsys_pil_tz/parameters/enable_debug ${persist.sys.ssr.enable_debug}
-
-on property:persist.sys.mba_boot_timeout=*
-    write /sys/module/pil_msa/parameters/pbl_mba_boot_timeout_ms ${persist.sys.mba_boot_timeout}
-
-on property:persist.sys.modem_auth_timeout=*
-    write /sys/module/pil_msa/parameters/modem_auth_timeout_ms ${persist.sys.modem_auth_timeout}
-
-on property:persist.sys.pil_proxy_timeout=*
-    write /sys/module/peripheral_loader/parameters/proxy_timeout_ms ${persist.sys.pil_proxy_timeout}
-
-on property:persist.vendor.ssr.enable_ramdumps=1
-    write /sys/module/subsystem_restart/parameters/enable_ramdumps 1
-
-on property:persist.vendor.ssr.enable_ramdumps=0
-    write /sys/module/subsystem_restart/parameters/enable_ramdumps 0
-
-on property:persist.vendor.sys.rawdump_copy=1
-    write /sys/kernel/dload/emmc_dload 1
-
-on property:persist.vendor.sys.rawdump_copy=0
-    write /sys/kernel/dload/emmc_dload 0
-
-service kernel-boot /vendor/bin/sh /vendor/bin/init.qti.kernel.sh
-    class core
-    user root
-    group root
-    disabled
-    oneshot
-
-service kernel-post-boot /vendor/bin/sh /vendor/bin/init.kernel.post_boot.sh
-    class core
-    user root
-    group root system wakelock graphics
-    disabled
-    oneshot
-
-on property:sys.boot_completed=1
-    write /dev/kmsg "Boot completed "
-    #Reset read ahead for dm-0, dm-1 and dm-2 to 512kb
-    write /sys/block/dm-0/queue/read_ahead_kb 512
-    write /sys/block/dm-1/queue/read_ahead_kb 512
-    write /sys/block/dm-2/queue/read_ahead_kb 512
-    write /proc/sys/vm/page-cluster 0
-    start kernel-boot
-    start kernel-post-boot
-
-service vendor.msm_irqbalance /vendor/bin/msm_irqbalance -f /system/vendor/etc/msm_irqbalance.conf
-    class core
-    user root
-    group root
-    disabled
diff --git a/rootdir/etc/init/init.qti.qcv.rc b/rootdir/etc/init/init.qti.qcv.rc
deleted file mode 100644
index 1904162..0000000
--- a/rootdir/etc/init/init.qti.qcv.rc
+++ /dev/null
@@ -1,12 +0,0 @@
-#! /vendor/etc/init
-#=============================================================================
-# Copyright (c) 2020 Qualcomm Technologies, Inc.
-# All Rights Reserved.
-# Confidential and Proprietary - Qualcomm Technologies, Inc.
-#=============================================================================
-
-on early-init
-    # Set ro.boot.product.vendor.sku to soc_name
-    exec u:r:vendor_qti_init_shell:s0 -- /vendor/bin/init.qti.qcv.sh
-    setprop ro.boot.product.vendor.sku ${ro.vendor.qti.soc_name}
-    setprop ro.soc.model ${ro.vendor.qti.soc_model}
\ No newline at end of file