sm6375-common: Update to fogos_g V1UGS35H.75-14-3-9

Change-Id: If04f2f0a9416be312af5b7adf91d2b929932c101
sm6375-common: Remove unused fingerprint services
2026-10-05 19:31:58 -04:00 · 2026-07-22 13:10:01 +03:00 · 2026-06-07 07:26:04 +03:00 · 2026-06-01 17:21:54 +03:00 · 2026-05-11 20:03:49 +02:00 · 2026-05-07 17:39:32 +03:00
20 changed files with 103 additions and 393 deletions
--- a/BoardConfigCommon.mk
+++ b/BoardConfigCommon.mk
@ -148,10 +148,22 @@ BOARD_VENDOR_SEPOLICY_DIRS += $(COMMON_PATH)/sepolicy/vendor

 # Verified Boot
 BOARD_AVB_ENABLE := true
+
+ifneq (,$(AVB_CUSTOM_KEY_PATH))
+BOARD_AVB_ALGORITHM := $(AVB_CUSTOM_ALGORITHM)
+BOARD_AVB_KEY_PATH := $(AVB_CUSTOM_KEY_PATH)
+else
+AVB_CUSTOM_ALGORITHM := SHA256_RSA2048
+AVB_CUSTOM_KEY_PATH := external/avb/test/data/testkey_rsa2048.pem
+endif
+
+ifneq ($(WITH_AVB),true)
 BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS += --flags 3
+endif
+
 BOARD_AVB_VBMETA_SYSTEM := system system_ext product
-BOARD_AVB_VBMETA_SYSTEM_KEY_PATH := external/avb/test/data/testkey_rsa2048.pem
-BOARD_AVB_VBMETA_SYSTEM_ALGORITHM := SHA256_RSA2048
+BOARD_AVB_VBMETA_SYSTEM_ALGORITHM := $(AVB_CUSTOM_ALGORITHM)
+BOARD_AVB_VBMETA_SYSTEM_KEY_PATH := $(AVB_CUSTOM_KEY_PATH)
 BOARD_AVB_VBMETA_SYSTEM_ROLLBACK_INDEX_LOCATION := 2

 # WiFi
--- a/audio/audio_policy_configuration.xml
+++ b/audio/audio_policy_configuration.xml
@ -99,11 +99,6 @@ IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
                    <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
                             samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
                </mixPort>
-                <mixPort name="raw" role="source"
-                        flags="AUDIO_OUTPUT_FLAG_FAST|AUDIO_OUTPUT_FLAG_RAW">
-                    <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
-                             samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
-                </mixPort>
                <mixPort name="deep_buffer" role="source"
                        flags="AUDIO_OUTPUT_FLAG_DEEP_BUFFER">
                    <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
@ -360,31 +355,31 @@ IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
            <!-- route declaration, i.e. list all available sources for a given sink -->
            <routes>
                <route type="mix" sink="Earpiece"
-                       sources="primary output,raw,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out"/>
+                       sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out"/>
                <route type="mix" sink="Speaker"
-                       sources="primary output,raw,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out"/>
+                       sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out"/>
                <route type="mix" sink="Wired Headset"
-                       sources="primary output,raw,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out"/>
+                       sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out"/>
                <route type="mix" sink="Wired Headphones"
-                       sources="primary output,raw,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out"/>
+                       sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out"/>
                <route type="mix" sink="Line"
-                       sources="primary output,raw,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out"/>
+                       sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out"/>
                <route type="mix" sink="HDMI"
-                       sources="primary output,raw,deep_buffer,direct_pcm,compressed_offload,compress_passthrough,voip_rx"/>
+                       sources="primary output,deep_buffer,direct_pcm,compressed_offload,compress_passthrough,voip_rx"/>
                <route type="mix" sink="Proxy"
-                       sources="primary output,raw,deep_buffer,direct_pcm,compressed_offload"/>
+                       sources="primary output,deep_buffer,direct_pcm,compressed_offload"/>
                <route type="mix" sink="FM"
                       sources="primary output"/>
                <route type="mix" sink="BT SCO"
-                       sources="primary output,raw,deep_buffer,direct_pcm,compressed_offload,voip_rx"/>
+                       sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx"/>
                <route type="mix" sink="BT SCO Headset"
-                       sources="primary output,raw,deep_buffer,direct_pcm,compressed_offload,voip_rx"/>
+                       sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx"/>
                <route type="mix" sink="BT SCO Car Kit"
-                       sources="primary output,raw,deep_buffer,direct_pcm,compressed_offload,voip_rx"/>
+                       sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx"/>
                <route type="mix" sink="USB Device Out"
-                       sources="primary output,raw,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out,hifi_playback"/>
+                       sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out,hifi_playback"/>
                <route type="mix" sink="USB Headset Out"
-                       sources="primary output,raw,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out,hifi_playback"/>
+                       sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out,hifi_playback"/>
                <route type="mix" sink="Telephony Tx"
                       sources="voice_tx,incall_music_uplink"/>
                <route type="mix" sink="voice_rx"
--- a/audio/audio_policy_configuration_offload_disabled.xml
+++ b/audio/audio_policy_configuration_offload_disabled.xml
@ -99,11 +99,6 @@ IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
                    <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
                             samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
                </mixPort>
-                <mixPort name="raw" role="source"
-                        flags="AUDIO_OUTPUT_FLAG_FAST|AUDIO_OUTPUT_FLAG_RAW">
-                    <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
-                             samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
-                </mixPort>
                <mixPort name="deep_buffer" role="source"
                        flags="AUDIO_OUTPUT_FLAG_DEEP_BUFFER">
                    <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
@ -345,31 +340,31 @@ IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
            <!-- route declaration, i.e. list all available sources for a given sink -->
            <routes>
                <route type="mix" sink="Earpiece"
-                       sources="primary output,raw,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out"/>
+                       sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out"/>
                <route type="mix" sink="Speaker"
-                       sources="primary output,raw,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out"/>
+                       sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out"/>
                <route type="mix" sink="Wired Headset"
-                       sources="primary output,raw,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out"/>
+                       sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out"/>
                <route type="mix" sink="Wired Headphones"
-                       sources="primary output,raw,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out"/>
+                       sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out"/>
                <route type="mix" sink="Line"
-                       sources="primary output,raw,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out"/>
+                       sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out"/>
                <route type="mix" sink="HDMI"
-                       sources="primary output,raw,deep_buffer,direct_pcm,compressed_offload,compress_passthrough,voip_rx"/>
+                       sources="primary output,deep_buffer,direct_pcm,compressed_offload,compress_passthrough,voip_rx"/>
                <route type="mix" sink="Proxy"
-                       sources="primary output,raw,deep_buffer,direct_pcm,compressed_offload"/>
+                       sources="primary output,deep_buffer,direct_pcm,compressed_offload"/>
                <route type="mix" sink="FM"
                       sources="primary output"/>
                <route type="mix" sink="BT SCO"
-                       sources="primary output,raw,deep_buffer,direct_pcm,compressed_offload,voip_rx"/>
+                       sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx"/>
                <route type="mix" sink="BT SCO Headset"
-                       sources="primary output,raw,deep_buffer,direct_pcm,compressed_offload,voip_rx"/>
+                       sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx"/>
                <route type="mix" sink="BT SCO Car Kit"
-                       sources="primary output,raw,deep_buffer,direct_pcm,compressed_offload,voip_rx"/>
+                       sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx"/>
                <route type="mix" sink="USB Device Out"
-                       sources="primary output,raw,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out,hifi_playback"/>
+                       sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out,hifi_playback"/>
                <route type="mix" sink="USB Headset Out"
-                       sources="primary output,raw,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out,hifi_playback"/>
+                       sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out,hifi_playback"/>
                <route type="mix" sink="Telephony Tx"
                       sources="voice_tx,incall_music_uplink"/>
                <route type="mix" sink="voice_rx"
--- a/common.mk
+++ b/common.mk
@ -31,6 +31,7 @@ PRODUCT_PACKAGES += \
    FrameworksResCommon \
    FrameworksResProduct \
    FrameworksResTarget \
+    LineageApertureAppCommon \
    NcmTetheringOverlay \
    SettingsProviderResCommon \
    SystemUIResCommon \
@ -137,10 +138,6 @@ PRODUCT_PACKAGES += \
 PRODUCT_PACKAGES += \
    fastbootd

-# Framework detect
-PRODUCT_PACKAGES += \
-    libvndfwk_detect_jni.qti.vendor # Needed by CNE app
-
 # GPS
 PRODUCT_PACKAGES += \
    android.hardware.gnss@2.1-impl-qti \
@ -156,10 +153,7 @@ PRODUCT_PACKAGES += \
    flp.conf \
    gnss_antenna_info.conf \
    gps.conf \
-    izat.conf \
-    lowi.conf \
-    sap.conf \
-    xtwifi.conf
+    izat.conf

 # Health
 PRODUCT_PACKAGES += \
@ -203,6 +197,12 @@ PRODUCT_PACKAGES += \
 $(call soong_config_set_bool,livedisplay_sdm,enable_dm,false)
 $(call soong_config_set_bool,livedisplay_sysfs,enable_se,true)

+# Lineage Health
+PRODUCT_PACKAGES += \
+    vendor.lineage.health-service.default
+
+$(call soong_config_set,lineage_health,charging_control_charging_path,/sys/module/qpnp_adaptive_charge/parameters/charging_enabled)
+
 # Media
 PRODUCT_COPY_FILES += \
    $(LOCAL_PATH)/media/blair/media_codecs_performance_blair.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_performance_blair.xml \
@ -212,6 +212,8 @@ PRODUCT_COPY_FILES += \
    $(LOCAL_PATH)/media/media_codecs_c2.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_c2.xml \
    $(LOCAL_PATH)/media/media_codecs_performance_c2.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_performance_c2.xml

+$(call soong_config_set_bool,stagefright,target_disable_thumbnail_block_model,true)
+
 # Moto hardware
 PRODUCT_PACKAGES += \
    MotoActions \
--- a/extract-files.py
+++ b/extract-files.py
@ -40,7 +40,6 @@ lib_fixups: lib_fixups_user_type = {
        'vendor.qti.hardware.fm@1.0',
        'vendor.qti.hardware.wifidisplaysession@1.0',
        'vendor.qti.imsrtpservice@3.0',
-        'vendor.qti.qspmhal@1.0',
    ): lib_fixup_vendor_suffix,
 }

@ -51,6 +50,11 @@ blob_fixups: blob_fixups_user_type = {
        .add_needed('libinput_shim.so'),
    'system_ext/priv-app/ims/ims.apk': blob_fixup()
        .apktool_patch('ims-patches'),
+    (
+        'vendor/lib64/libdpps.so',
+        'vendor/lib64/libsnapdragoncolor-manager.so',
+    ): blob_fixup()
+        .replace_needed('libtinyxml2.so', 'libtinyxml2-v34.so'),
    'vendor/lib64/libwvhidl.so': blob_fixup()
        .add_needed('libcrypto_shim.so'),
    ('vendor/bin/init.kernel.post_boot-blair.sh', 'vendor/bin/init.kernel.post_boot-holi.sh'): blob_fixup()
--- a/gps/etc/Android.bp
+++ b/gps/etc/Android.bp
@ -18,24 +18,6 @@ prebuilt_etc {
    src: "izat.conf",
 }

-prebuilt_etc {
-    name: "lowi.conf",
-    vendor: true,
-    src: "lowi.conf",
-}
-
-prebuilt_etc {
-    name: "sap.conf",
-    vendor: true,
-    src: "sap.conf",
-}
-
-prebuilt_etc {
-    name: "xtwifi.conf",
-    vendor: true,
-    src: "xtwifi.conf",
-}
-
 prebuilt_etc {

    name: "gnss_antenna_info.conf",
--- a/gps/etc/lowi.conf
+++ b/gps/etc/lowi.conf
@ -1,29 +0,0 @@
-#*====*====*====*====*====*====*====*====*====*====*====*====*====*====*====*
-#
-# LOWI Config file - lahaina
-#
-# GENERAL DESCRIPTION
-#  This file contains the config params for LOWI
-#
-# Copyright (c) 2019 Qualcomm Technologies, Inc.
-#  All Rights Reserved.
-#  Confidential and Proprietary - Qualcomm Technologies, Inc.
-#
-# 2012-2013 Qualcomm Atheros, Inc.
-#  All Rights Reserved.
-#  Qualcomm Atheros Confidential and Proprietary.
-#
-# Export of this technology or software is regulated by the U.S. Government.
-# Diversion contrary to U.S. law prohibited.
-#=============================================================================*/
-
-# X86 ONLY - UBUNTU:
-# Copy this file in the same directory where the executable is
-
-# Log level
-# EL_LOG_OFF = 0, EL_ERROR = 1, EL_WARNING = 2, EL_INFO = 3, EL_DEBUG = 4, EL_VERBOSE = 5, EL_LOG_ALL = 100
-LOWI_LOG_LEVEL = 4
-LOWI_USE_LOWI_LP = 0
-LOWI_HE_RTT_SUPPORT = 1
-LOWI_USE_NLMSG_FOR_CAPS = 1
-LOWI_RTT_WEIGHTED_MEAN = 1
--- a/gps/etc/sap.conf
+++ b/gps/etc/sap.conf
@ -1,179 +0,0 @@
-################################
-# Sensor Settings
-################################
-#The following parameters are optional.
-#Internal defaults support MEMS sensors
-#native to most handset devices.
-#Device specific sensor characterization
-#for improved performance is possible as
-#described in SAP application notes.
-#GYRO_BIAS_RANDOM_WALK=
-#ACCEL_RANDOM_WALK_SPECTRAL_DENSITY=
-#ANGLE_RANDOM_WALK_SPECTRAL_DENSITY=
-#RATE_RANDOM_WALK_SPECTRAL_DENSITY=
-#VELOCITY_RANDOM_WALK_SPECTRAL_DENSITY=
-
-# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
-#               4 - Debug, 5 - Verbose
-# If DEBUG_LEVEL is commented, Android's logging levels will be used
-DEBUG_LEVEL = 0
-# Sensor Sampling Rate Parameters for Low-Data Rate Filter (should be greater than 0)
-# used in loc_eng_reinit
-SENSOR_ACCEL_BATCHES_PER_SEC=2
-SENSOR_ACCEL_SAMPLES_PER_BATCH=5
-SENSOR_GYRO_BATCHES_PER_SEC=2
-SENSOR_GYRO_SAMPLES_PER_BATCH=5
-# Sensor Sampling Rate Parameters for High-Data Rate Filter (should be greater than 0)
-SENSOR_ACCEL_BATCHES_PER_SEC_HIGH=4
-SENSOR_ACCEL_SAMPLES_PER_BATCH_HIGH=25
-SENSOR_GYRO_BATCHES_PER_SEC_HIGH=4
-SENSOR_GYRO_SAMPLES_PER_BATCH_HIGH=25
-
-# Sensor Control Mode (0=AUTO, 1=FORCE_ON, 2=MODEM_DEFAULT)
-# used in loc_eng_reinit
-SENSOR_CONTROL_MODE=2
-
-# Bit mask used to define which sensor algorithms are used.
-# Setting each bit has the following definition:
-#  0x1 - DISABLE_INS_POSITIONING_FILTER
-#  0x0 - ENABLE_INS_POSITIONING_FILTER
-SENSOR_ALGORITHM_CONFIG_MASK=0x0
-
-#Vehicle Network Provider configuration
-
-#Service configuration strings
-#The number before colon in VN_X items defines version of the format of the rest of the string
-#VN_ACCEL_CFG=0:5
-#VN_GYRO_CFG=0:5.5
-#VN_ODOMETRY_CFG=0:2,4.5
-
-################################################
-#  QDR3 configurations                         #
-################################################
-#VN_SPEED_CFG=1:131,5,8,1,2,3,1,1,9,2,14,2
-#VN_GEAR_CFG=1:422,20,4,0,4,1,9,0,1,2,3,4,5,6,7,8
-VN_SPEED_CFG=1:777,0,0,1,3,1,0.002778,0,40,8,32,8
-VN_GEAR_CFG=1:422,20,4,0,4,1,9,0,1,2,3,4,5,6,7,8
-
-################################################
-#  QDR2-Gyro configurations                    #
-################################################
-#VN_GYRO_CFG=1:555,0,1,0,0,0,0,-6.5,6.6066,-6.5,-1.00,2,6.607,6.6068,0,0,16,0.0002,0,16,0.0002,0,16,0.0002
-#VN_SPEED_CFG=1:555,0,0,1,2,1,0.01,0,56,8,48,8
-#VN_GEAR_CFG=1:555,16,4,0,1,1,9,0,1,2,3,4,5,6,7,8
-
-################################################
-#  QDR2-DWT configurations                     #
-################################################
-#VN_SPEED_CFG=1:555,22,1,2,1,1,1,0,8,8,23,1,2,0,1,0,8,8,23,1
-#VN_GEAR_CFG=1:555,12,4,16,14,16,8,1,2,3,4,5,6,7,8
-#VN_DWS_CFG=1:555,0,0,1,3,1,1,0,0,8,0,0,8,8,0,0,16,8,0,0,24,8,0,0
-#VN_GYRO_CFG=1:555,40,16,1.0,40,16,1.0,40,16,1.0
-
-#####################################################################################
-#                    VNW service batching configuration strings                     #
-# VNW provider will initialize default type as Time based batching                  #
-# Each service batch value is configured to be 100                                  #
-# VN_ACCEL_CFG_BATCH_VALUE will be treated as time in Ms if VN_CFG_BATCH_TYPE       #
-# is set to time based batching                                                     #
-# VN_ACCEL_CFG_BATCH_VALUE will be treated as sample count if VN_CFG_BATCH_TYPE     #
-# is set to count based batching                                                    #
-# Uncomment and update batch time /sample count as per selected batching type       #
-#####################################################################################
-# Batching type
-# 1 - Time based  (default)
-# 2 - Count based
-VN_CFG_BATCH_TYPE=1
-
-#Vehicle Accel batching value, it can either accept time in milli seconds or sample count
-#VN_ACCEL_CFG_BATCH_VALUE=100
-
-#Vehicle Gyro batching value, it can either accept time in milli seconds or sample count
-VN_GYRO_CFG_BATCH_VALUE=50
-
-#Vehicle Odo batching value, it can either accept time in milli seconds or sample count
-#VN_ODOMETRY_CFG_BATCH_VALUE=100
-
-#Vehicle Speed batching value, it can either accept time in milli seconds or sample count
-VN_SPEED_CFG_BATCH_VALUE=50
-
-#Vehicle Gear batching value, it can either accept time in milli seconds or sample count
-VN_GEAR_CFG_BATCH_VALUE=50
-
-#Vehicle DWS batching value, it can either accept time in milli seconds or sample count
-#VN_DWS_CFG_BATCH_VALUE=100
-####################################################################################
-
-#Procesors clock ratio: AP and CAN bus microcontroller
-################################################
-#  QDR3 configurations                         #
-################################################
-VN_PROC_CLOCK_RATIO=1.0
-
-################################################
-#  QDR2-DWT OR QDR2-Gyro configurations        #
-################################################
-#VN_PROC_CLOCK_RATIO = 1.0
-
-# Time source used by Sensor HAL
-# Setting this value controls accuracy of location sensor services.
-#  0 - Unknown
-#  1 - CLOCK_BOOTTIME
-#  2 - CLOCK_MONOTONIC
-#  3 - CLOCK_REALTIME
-#  4 - CLOCK_BOOTTIME using Alarm timer interface
-NDK_PROVIDER_TIME_SOURCE=1
-
-# Sensor Batching Configuration
-# 0 - Time based
-# 1 - Fixed count based
-# 2 - Variable count based
-COUNT_BASED_BATCHING=1
-SYNC_ONCE=0
-
-# Vehicle Network Data optimization
-# Default value: 0
-# Value 0x40000 -  Speed(bit 18 eSLIM_SERVICE_VEHICLE_SPEED)
-# Value 0x80000 -  Speed(bit 19 eSLIM_SERVICE_VEHICLE_DWS)
-# Value 0x100000 -  Speed(bit 20 eSLIM_SERVICE_VEHICLE_GEAR)
-VN_ENABLE_DATA_OPTIMIZATION=0x100000
-
-# Vehicle Network Data Routing time interval
-# This is applicable only if VN_ENABLE_DATA_OPTIMIZATION value is set
-# Default value: 5000 msec
-VN_DATA_ROUTING_TIME_INTERVAL_MSEC=3000
-
-#Sensor HAL Provider Configuration HAL Library name including path
-################################################
-#                                              #
-# Configuration for BMI 160 Sensor             #
-#                                              #
-################################################
-#SENSOR_TYPE=2
-#SENSOR_HAL_LIB_PATH=/usr/lib/libbmi160sensors.so.1
-
-################################################
-#                                              #
-# Configuration for ASM330 Sensor              #
-#                                              #
-################################################
-SENSOR_TYPE=1
-SENSOR_HAL_LIB_PATH=/usr/lib/libasm330sensors.so.1
-
-
-################################################
-#                                              #
-# Configuration for IAM20680 Sensor            #
-#                                              #
-################################################
-#SENSOR_TYPE=3
-#SENSOR_HAL_LIB_PATH=/usr/lib/libiam20680sensors.so.1
-
-
-################################################
-#                                              #
-# Configuration for SMI130 Sensor              #
-#                                              #
-################################################
-#SENSOR_TYPE=4
-#SENSOR_HAL_LIB_PATH=/usr/lib/libsmi130sensors.so.1
--- a/gps/etc/xtwifi.conf
+++ b/gps/etc/xtwifi.conf
@ -1,78 +0,0 @@
-#GTP AP Project client core config file
-#
-#GENERAL DESCRIPTION
-#This is used by client core
-#
-#Copyright (c) 2012-2014 Qualcomm Atheros, Inc.
-#All Rights Reserved.
-#Qualcomm Atheros Confidential and Proprietary.
-#
-#Copyright (c) 2017 Qualcomm Technologies, Inc.
-#All Rights Reserved.
-#Confidential and Proprietary - Qualcomm Technologies, Inc.
-
-##############################################################################
-# non-IOT devices configuration items                                        #
-# For non-IOT devices, configure below configuration items                   #
-# according to the app note: 80-NK218-1 and remove the configuration items   #
-# in section of "IOT devices configuration items".                           #
-##############################################################################
-
-# ASN URI v2 to be used by some GTP AP modules that
-# need to run with ASN URI v2 protocol.
-XT_SERVER_ROOT_URL = https://gtp1.izatcloud.net:443/uds/v2
-
-# ASN URI v3 to be used by GTP AP modules that
-# can support ASN URI v3 protocol.
-XT_SERVER_ROOT_URL_V3 = https://gtp1.izatcloud.net:443/uds/v3
-
-# size, in bytes, of the cache on device
-SIZE_BYTE_TOTAL_CACHE = 5000000
-
-##############################################################################
-# IOT devices configuration items                                            #
-# For IOT devices, configure below configuration items                       #
-# according to the app note and remove the configuration items in section of #
-# "non-IOT devices configuration items".                                     #
-##############################################################################
-
-# ASN URI v3 to be used by GTP AP modules that
-# can support ASN URI v3 protocol.
-# XT_SERVER_ROOT_URL_V3 = https://gtpma1.izatcloud.net:443/uds/v3
-
-# 3: Wi-Fi APDB injection via Izat SDK. GTP server is not accessed
-#    for any GTP requests, instead notification is sent to Izat SDK.
-#    WiFi crowdsourcing module is disabled.
-# 4: Wi-Fi APDB injection via Izat SDK. GTP server is not accessed
-#    for any GTP requests, instead notification is sent to Izat SDK.
-#    WiFi crowdsourcing module is active, also accessed via Izat SDK.
-# GTP_AP_MODE = 4
-
-# 1: MP cell features relies on GTP AP for either download or upload
-# 0: MP cell features does not rely on GTP AP
-# GTP_AP_NEEDED_BY_MP_CELL = 1
-
-##############################################################################
-# Configuration items applicable to all devices                              #
-##############################################################################
-
-# Log verbosity control for most of the GTP WiFi system, including native and
-# Java componenets
-# OFF = 0, ERROR = 1, WARNING = 2, INFO = 3, DEBUG = 4, VERBOSE = 5, ALL = 100
-DEBUG_GLOBAL_LOG_LEVEL = 2
-
-# this is used at the server side to distinguish uploads from different maker/model
-# default "Qualcomm"
-OEM_ID_IN_REQUEST_TO_SERVER = "Qualcomm"
-
-# this is used at the server side to distinguish uploads from different maker/model
-# default "UNKNOWN"
-MODEL_ID_IN_REQUEST_TO_SERVER = "UNKNOWN"
-
-##############################################################################
-# Qualcomm Network Location Provider config                                  #
-##############################################################################
-
-# Accuracy Threshold for NLP position. Position exceeds thsi threshold will be filtered out.
-# Default is 25000 meters.
-LARGE_ACCURACY_THRESHOLD_TO_FILTER_NLP_POSITION = 25000
--- a/manifest.xml
+++ b/manifest.xml
@ -3,7 +3,7 @@
     SPDX-FileCopyrightText: The LineageOS Project
     SPDX-License-Identifier: Apache-2.0
 -->
-<manifest version="2.0" type="device" target-level="6">
+<manifest version="2.0" type="device" target-level="7">
    <hal format="hidl">
        <name>android.hardware.audio</name>
        <transport>hwbinder</transport>
@ -178,11 +178,6 @@
        <transport>hwbinder</transport>
        <fqname>@1.0::IFmHci/default</fqname>
    </hal>
-    <hal format="hidl">
-        <name>vendor.qti.hardware.iop</name>
-        <transport>hwbinder</transport>
-        <fqname>@2.0::IIop/default</fqname>
-    </hal>
    <hal format="hidl">
        <name>vendor.qti.hardware.perf</name>
        <transport>hwbinder</transport>
--- a/overlay-lineage/lineage-sdk/packages/LineageSettingsProvider/res/values/defaults.xml
+++ b/overlay-lineage/lineage-sdk/packages/LineageSettingsProvider/res/values/defaults.xml
@ -0,0 +1,9 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     SPDX-FileCopyrightText: The LineageOS Project
+     SPDX-License-Identifier: Apache-2.0
+-->
+<resources>
+    <!-- Default for Settings.Global.DISABLE_WINDOW_BLURS -->
+    <integer name="def_disable_window_blurs">1</integer>
+</resources>
--- a/product.prop
+++ b/product.prop
@ -1,3 +1,6 @@
+# eBPF
+ro.bpf.kver_override=5.10.239
+
 # IMS
 ro.qcom.ims.use_moto_vt_ext=true

--- a/proprietary-files.txt
+++ b/proprietary-files.txt
@ -1,4 +1,4 @@
-# All unpinned blobs are extracted from fogos_g V1UGS35H.75-14-3-5
+# All unpinned blobs are extracted from fogos_g V1UGS35H.75-14-3-9

 # ADSP
 vendor/bin/adsprpcd
@ -285,6 +285,11 @@ vendor/lib64/vendor.qti.gnss@3.0.so
 vendor/lib64/vendor.qti.gnss@4.0-service.so
 vendor/lib64/vendor.qti.gnss@4.0.so

+# GNSS configs
+vendor/etc/lowi.conf
+vendor/etc/sap.conf
+vendor/etc/xtwifi.conf
+
 # Graphics - Adreno
 vendor/lib/egl/eglSubDriverAndroid.so
 vendor/lib/egl/libEGL_adreno.so;SYMLINK=vendor/lib/libEGL_adreno.so
@ -337,11 +342,6 @@ vendor/gpu/kbc/unified_ksqs.bin
 vendor/lib/hw/vulkan.adreno.so
 vendor/lib64/hw/vulkan.adreno.so

-# IO prefetcher
-vendor/lib64/libqti-iopd-client.so
-vendor/lib64/libqti-iopd.so
-vendor/lib64/vendor.qti.hardware.iop@2.0.so
-
 # IPA firmware
 vendor/etc/init/ipa_fws.rc

@ -491,23 +491,12 @@ vendor/lib64/libqmi_encdec.so
 vendor/lib64/libqmiservices.so

 # QSPM
-system_ext/bin/qspmsvc
-system_ext/etc/init/qspmsvc.rc
-system_ext/lib64/libqspmsvc.so
-system_ext/lib64/vendor.qti.qspmhal-V1-ndk.so
-system_ext/lib64/vendor.qti.qspmhal@1.0.so
 vendor/bin/vendor.qti.qspmhal@1.0-service
 vendor/etc/init/vendor.qti.qspmhal@1.0-service.rc
 vendor/etc/seccomp_policy/qspm.policy
-vendor/lib/vendor.qti.qspmhal@1.0.so;MODULE_SUFFIX=_vendor
+vendor/lib/vendor.qti.qspmhal@1.0.so
 vendor/lib64/vendor.qti.qspmhal@1.0-impl.so
-vendor/lib64/vendor.qti.qspmhal@1.0.so;MODULE_SUFFIX=_vendor
-
-# QTI service tracker
-vendor/bin/hw/vendor.qti.hardware.servicetracker@1.2-service
-vendor/etc/init/vendor.qti.hardware.servicetracker@1.2-service.rc
-vendor/etc/vintf/manifest/vendor.qti.hardware.servicetracker@1.2-service.xml
-vendor/lib64/hw/vendor.qti.hardware.servicetracker@1.2-impl.so
+vendor/lib64/vendor.qti.qspmhal@1.0.so

 # RIL
 product/app/uimgbaservice/uimgbaservice.apk
--- a/resource-overlay/common/Frameworks/res/values/config.xml
+++ b/resource-overlay/common/Frameworks/res/values/config.xml
@ -43,7 +43,7 @@
    <!-- Screen brightness used to dim the screen while dozing in a very low power state.
         May be less than the minimum allowed brightness setting
         that can be set by the user. -->
-    <integer name="config_screenBrightnessDoze">17</integer>
+    <item name="config_screenBrightnessDozeFloat" format="float" type="dimen">0.06667</item>

    <!-- The restoring is handled by modem if it is true-->
    <bool name="skip_restoring_network_selection">true</bool>
--- a/resource-overlay/common/LineageApertureApp/Android.bp
+++ b/resource-overlay/common/LineageApertureApp/Android.bp
@ -0,0 +1,9 @@
+//
+// SPDX-FileCopyrightText: The LineageOS Project
+// SPDX-License-Identifier: Apache-2.0
+//
+
+runtime_resource_overlay {
+    name: "LineageApertureAppCommon",
+    vendor: true,
+}
--- a/resource-overlay/common/LineageApertureApp/AndroidManifest.xml
+++ b/resource-overlay/common/LineageApertureApp/AndroidManifest.xml
@ -0,0 +1,13 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     SPDX-FileCopyrightText: The LineageOS Project
+     SPDX-License-Identifier: Apache-2.0
+-->
+<manifest xmlns:android="http://schemas.android.com/apk/res/android"
+    package="org.lineageos.aperture.common.lineage">
+
+    <overlay
+        android:isStatic="true"
+        android:priority="200"
+        android:targetPackage="org.lineageos.aperture" />
+</manifest>
--- a/overlay-lineage/packages/apps/Aperture/app/src/main/res/values/config.xml
+++ b/overlay-lineage/packages/apps/Aperture/app/src/main/res/values/config.xml
--- a/rootdir/etc/init/hw/init.mmi.chipset.rc
+++ b/rootdir/etc/init/hw/init.mmi.chipset.rc
@ -7,9 +7,9 @@ on early-boot
    chown system system /sys/devices/platform/soc/4804000.ufshc/ufshid/trigger

 on boot
-   # Set adaptive charging perms for HAL
-   chown system system /sys/module/qpnp_adaptive_charge/parameters/upper_limit
-   chown system system /sys/module/qpnp_adaptive_charge/parameters/lower_limit
+    # Set adaptive charging perms for HAL
+    chown system system /sys/module/qpnp_adaptive_charge/parameters/charging_enabled
+    chmod 0660 /sys/module/qpnp_adaptive_charge/parameters/charging_enabled

 on property:sys.boot_completed=1
    write /sys/devices/platform/soc/soc:mmi,charger/state_sync 1
--- a/rootdir/etc/init/hw/init.mmi.rc
+++ b/rootdir/etc/init/hw/init.mmi.rc
@ -58,7 +58,6 @@ on early-init
 on fs
    insmod /vendor/lib/modules/cci_intf.ko
    mkdir /mnt/vendor/persist/fps 0770 system system
-    exec_start vendor.ident-fps-sh

 on fs && property:ro.vendor.hw.modem_version=*
    # Super modem detection
@ -338,20 +337,6 @@ service vendor.hal-fps-sh /vendor/bin/init.oem.fingerprint2.sh
    group system
    oneshot

-service fpc_ident /vendor/bin/hw/fpc_ident
-    class late_start
-    user system
-    group system
-    oneshot
-    disabled
-
-service egis_ident /vendor/bin/hw/egis_ident
-    class late_start
-    user system
-    group system
-    oneshot
-    disabled
-
 service vendor.touch-dead-sh /vendor/bin/init.oem.hw.sh -f
    class main
    user root
--- a/vendor.prop
+++ b/vendor.prop
@ -315,6 +315,7 @@ ro.surface_flinger.max_frame_buffer_acquired_buffers=4
 ro.surface_flinger.max_virtual_display_dimension=4096
 ro.surface_flinger.protected_contents=true
 ro.surface_flinger.set_touch_timer_ms=200
+ro.surface_flinger.supports_background_blur=1
 ro.surface_flinger.use_color_management=true
 ro.surface_flinger.use_content_detection_for_refresh_rate=true
 ro.surface_flinger.use_smart_90_for_video=true
@ -322,6 +323,8 @@ ro.surface_flinger.wcg_composition_dataspace=143261696

 # USB
 sys.usb.mtp.batchcancel=1
+vendor.usb.controller=4e00000.dwc3
+vendor.usb.device=4e00000.ssusb
 vendor.usb.diag.func.name=ffs
 vendor.usb.dpl.inst.name=dpl
 vendor.usb.qdss.inst.name=qdss
Author	SHA1	Message	Date
Michael Bestas	0f95093a24	sm6375-common: Update to fogos_g V1UGS35H.75-14-3-9 Change-Id: If04f2f0a9416be312af5b7adf91d2b929932c101	2026-07-22 13:10:01 +03:00
Michael Bestas	6a8b820e91	sm6375-common: Remove unused fingerprint services Change-Id: Idcc9dbd5bb1c02b1afcf0e5f26cfea1e0ceb9db6	2026-06-07 07:26:04 +03:00
Michael Bestas	b4c443ff2c	sm6375-common: Update to fogos_g V1UGS35H.75-14-3-8 Change-Id: I3ce881002eb85a57ae6f45c4e8e0e491df583e09	2026-06-01 17:21:54 +03:00
Arian	20bff46da7	sm6375-common: Allow to provide custom AVB keys and build an enabled vbmeta.img Change-Id: I0578219addb01f094ecd9ec386e820aaf972c284	2026-05-11 20:03:49 +02:00
Nolen Johnson	bec8c1a920	sm6375-common: Set FCM level to 7 Change-Id: I06019ee4824a630180c09c39915e1819bb7482af	2026-05-07 17:39:32 +03:00
Michael Bestas	2f6236702d	sm6375-common: Convert Aperture overlay to RRO Change-Id: If0abfcbc0a0c228dfe0cb3b4cd2f8b2fca7e8525	2026-05-05 21:44:53 +02:00
Tommy Webb	bdcdde058c	sm6375-common: Specify vendor.usb.controller Specify this so that USB can be properly brought back online via HAL. It was already specified in these locations: - device/motorola/sm6225-common/rootdir/etc/init.target.rc But this apparently isn't early enough in the boot process. - vendor/qcom/opensource/usb/vendor_product.mk But this apparently isn't included and doesn't take effect. As a result, vendor/qcom/opensource/usb/hal/Usb.cpp would use its fallback value of a600000.dwc3, which is not correct. Issue: calyxos#3491 Change-Id: I3f10cb8d902281b3cd06e8c2b51bdf60bb57742e	2026-04-26 19:01:59 +02:00
Tommy Webb	487d7f08f3	sm6375-common: Specify vendor.usb.device Needed to restrict USB properly. Issue: calyxos#3491 Change-Id: I4fc97c4a0be7a96c89d674bcde613ccf83d1c336	2026-04-26 19:01:56 +02:00
Michael Bestas	d5ed01c027	sm6375-common: Update to fogos_g V1UGS35H.75-14-3-7 Change-Id: I603e1163432bee0afbd3f1f8fc7a221c9a459b05	2026-04-17 03:18:46 +03:00
LuK1337	0c9d6ba80f	sm6375-common: Remove fwk-detect lib from PRODUCT_PACKAGES See: Iac75d83e6bc46c137c328a2365e6701c210bfe7a Change-Id: I6b8571e81e59f438e34b76823f47ff024ec33dc6	2026-04-14 07:21:40 +03:00
Michael Bestas	827824220b	sm6375-common: gps: Move some config files to vendor We don't make any changes there Change-Id: I1dfaade4a86b37576e6c848732cec4af9ad97c47	2026-04-14 00:08:31 +03:00
Michael Bestas	ff1035c5d5	sm6375-common: Update to fogos_g V1UGS35H.75-14-3-6 Change-Id: I2e11b3835434154d0dce629331c9e001e76caeac	2026-02-28 06:27:23 +02:00
Michael Bestas	f06874eb71	sm6375-common: Remove vendor suffix from vendor.qti.qspmhal@1.0 This was missed in `3e2b71bd98` Change-Id: Ie27dba635ac052ccb05c729f96dc7fbb625687fd	2026-02-04 01:16:15 +02:00
Michael Bestas	6b8e6a885d	sm6375-common: Build Lineage Health HAL Change-Id: I70cc903a03ac9fa3303bb8fa039c9de4806449bf	2026-02-03 15:08:05 +02:00
Edwin Moquete	93bb4b5ca1	sm6375-common: overlay: Convert config_screenBrightnessDoze to float Change-Id: Ibbb6f9b2ae030ad0938f5608526c392ef5b0cb1e	2026-01-24 03:01:20 +02:00
basamaryan	761ac3e33f	sm6375-common: overlay-lineage: Disable blurs by default Change-Id: Ia323bb8f66e3515bdf16ff3a14c919b8bd859eba	2026-01-17 07:35:25 +02:00
Lucas Dupin	a7c5921df2	sm6375-common: Enable blurs Bug: 181092919 Test: manual; performance scripts Change-Id: I5875a99167e80ddd5b79fc245f988d8a6ac167be	2026-01-16 23:29:33 +02:00
basamaryan	9692ca35f5	sm6375-common: Override kernel BPF version Change-Id: I3c581f3120b6258b3b45020c5ba12f6bf5b0ee27	2026-01-16 03:16:59 +02:00
LuK1337	17d69f3634	sm6375-common: audio: Disable ULL mode * Ultra low latency playback is currently broken. Crackling audio can be well noticed while playing WhatsApp audio messages or even during some games. * This patch routes all audio that normally used audio-ull-playback paths to low-latency-playback paths instead, thus meaning we're switching from ULL to LL mode. Change-Id: I7d672f1ff10b984c8096c9c4ca83475e730fd16f	2026-01-09 14:56:21 +00:00
kyasu	18bcb06f9d	sm6375-common: Disable `thumbnail_block_model` of libstagefright Change-Id: I86f92335af282d3de508150bbbcb3026993ec48c	2026-01-08 02:05:50 +02:00
Arian	3e2b71bd98	sm6375-common: Drop unused perf blobs Change-Id: I09e2c332102a5b67b7e1d74e9db3d64137e3010a	2026-01-05 05:45:29 +02:00
Michael Bestas	1ddaea0e7c	sm6375-common: Patch some blobs to depend on libtinyxml2-v34.so libtinyxml2 10.1.0 update which landed in BP4A contains ABI incompatible changes which cause runtime crashes. Change-Id: Icc67da5f754b0bb30dce6192b1e520fdf1349ac5	2025-12-29 14:31:06 +02:00