Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm

Pull ARM updates from Russell King:

 - UEFI boot and runtime services support for ARM from Ard Biesheuvel
   and Roy Franz.

 - DT compatibility with old atags booting protocol for Nokia N900
   devices from Ivaylo Dimitrov.

 - PSCI firmware interface using new arm-smc calling convention from
   Jens Wiklander.

 - Runtime patching for udiv/sdiv instructions for ARMv7 CPUs that
   support these instructions from Nicolas Pitre.

 - L2x0 cache updates from Dirk B and Linus Walleij.

 - Randconfig fixes from Arnd Bergmann.

 - ARMv7M (nommu) updates from Ezequiel Garcia

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (34 commits)
  ARM: 8481/2: drivers: psci: replace psci firmware calls
  ARM: 8480/2: arm64: add implementation for arm-smccc
  ARM: 8479/2: add implementation for arm-smccc
  ARM: 8478/2: arm/arm64: add arm-smccc
  ARM: 8494/1: mm: Enable PXN when running non-LPAE kernel on LPAE processor
  ARM: 8496/1: OMAP: RX51: save ATAGS data in the early boot stage
  ARM: 8495/1: ATAGS: move save_atags() to arch/arm/include/asm/setup.h
  ARM: 8452/3: PJ4: make coprocessor access sequences buildable in Thumb2 mode
  ARM: 8482/1: l2x0: make it possible to disable outer sync from DT
  ARM: 8488/1: Make IPI_CPU_BACKTRACE a "non-secure" SGI
  ARM: 8487/1: Remove IPI_CALL_FUNC_SINGLE
  ARM: 8485/1: cpuidle: remove cpu parameter from the cpuidle_ops suspend hook
  ARM: 8484/1: Documentation: l2c2x0: Mention separate controllers explicitly
  ARM: 8483/1: Documentation: l2c: Rename l2cc to l2c2x0
  ARM: 8477/1: runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()
  ARM: 8476/1: VDSO: use PTR_ERR_OR_ZERO for vma check
  ARM: 8453/2: proc-v7.S: don't locate temporary stack space in .text section
  ARM: add UEFI stub support
  ARM: wire up UEFI init and runtime support
  ARM: only consider memblocks with NOMAP cleared for linear mapping
  ...

drivers/firmware/Kconfig

@@ -173,6 +173,9 @@ config QCOM_SCM_64
 	def_bool y
 	depends on QCOM_SCM && ARM64
 
+config HAVE_ARM_SMCCC
+	bool
+
 source "drivers/firmware/broadcom/Kconfig"
 source "drivers/firmware/google/Kconfig"
 source "drivers/firmware/efi/Kconfig"

drivers/firmware/efi/Makefile

@@ -20,4 +20,5 @@ obj-$(CONFIG_EFI_STUB)			+= libstub/
 obj-$(CONFIG_EFI_FAKE_MEMMAP)		+= fake_mem.o
 
 arm-obj-$(CONFIG_EFI)			:= arm-init.o arm-runtime.o
+obj-$(CONFIG_ARM)			+= $(arm-obj-y)
 obj-$(CONFIG_ARM64)			+= $(arm-obj-y)

drivers/firmware/efi/libstub/Makefile

@@ -34,6 +34,7 @@ $(obj)/lib-%.o: $(srctree)/lib/%.c FORCE
 lib-$(CONFIG_EFI_ARMSTUB)	+= arm-stub.o fdt.o string.o \
 				   $(patsubst %.c,lib-%.o,$(arm-deps))
 
+lib-$(CONFIG_ARM)		+= arm32-stub.o
 lib-$(CONFIG_ARM64)		+= arm64-stub.o
 CFLAGS_arm64-stub.o 		:= -DTEXT_OFFSET=$(TEXT_OFFSET)
 
@@ -67,3 +68,11 @@ quiet_cmd_stubcopy = STUBCPY $@
 		     $(OBJDUMP) -r $@ | grep $(STUBCOPY_RELOC-y)	\
 		     && (echo >&2 "$@: absolute symbol references not allowed in the EFI stub"; \
 			 rm -f $@; /bin/false); else /bin/false; fi
+
+#
+# ARM discards the .data section because it disallows r/w data in the
+# decompressor. So move our .data to .data.efistub, which is preserved
+# explicitly by the decompressor linker script.
+#
+STUBCOPY_FLAGS-$(CONFIG_ARM)	+= --rename-section .data=.data.efistub
+STUBCOPY_RELOC-$(CONFIG_ARM)	:= R_ARM_ABS

drivers/firmware/efi/libstub/arm-stub.c

@@ -303,8 +303,10 @@ fail:
  * The value chosen is the largest non-zero power of 2 suitable for this purpose
  * both on 32-bit and 64-bit ARM CPUs, to maximize the likelihood that it can
  * be mapped efficiently.
+ * Since 32-bit ARM could potentially execute with a 1G/3G user/kernel split,
+ * map everything below 1 GB.
  */
-#define EFI_RT_VIRTUAL_BASE	0x40000000
+#define EFI_RT_VIRTUAL_BASE	SZ_512M
 
 static int cmp_mem_desc(const void *l, const void *r)
 {

drivers/firmware/efi/libstub/arm32-stub.c

@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2013 Linaro Ltd;  <roy.franz@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/efi.h>
+#include <asm/efi.h>
+
+efi_status_t handle_kernel_image(efi_system_table_t *sys_table,
+				 unsigned long *image_addr,
+				 unsigned long *image_size,
+				 unsigned long *reserve_addr,
+				 unsigned long *reserve_size,
+				 unsigned long dram_base,
+				 efi_loaded_image_t *image)
+{
+	unsigned long nr_pages;
+	efi_status_t status;
+	/* Use alloc_addr to tranlsate between types */
+	efi_physical_addr_t alloc_addr;
+
+	/*
+	 * Verify that the DRAM base address is compatible with the ARM
+	 * boot protocol, which determines the base of DRAM by masking
+	 * off the low 27 bits of the address at which the zImage is
+	 * loaded. These assumptions are made by the decompressor,
+	 * before any memory map is available.
+	 */
+	dram_base = round_up(dram_base, SZ_128M);
+
+	/*
+	 * Reserve memory for the uncompressed kernel image. This is
+	 * all that prevents any future allocations from conflicting
+	 * with the kernel. Since we can't tell from the compressed
+	 * image how much DRAM the kernel actually uses (due to BSS
+	 * size uncertainty) we allocate the maximum possible size.
+	 * Do this very early, as prints can cause memory allocations
+	 * that may conflict with this.
+	 */
+	alloc_addr = dram_base;
+	*reserve_size = MAX_UNCOMP_KERNEL_SIZE;
+	nr_pages = round_up(*reserve_size, EFI_PAGE_SIZE) / EFI_PAGE_SIZE;
+	status = sys_table->boottime->allocate_pages(EFI_ALLOCATE_ADDRESS,
+						     EFI_LOADER_DATA,
+						     nr_pages, &alloc_addr);
+	if (status != EFI_SUCCESS) {
+		*reserve_size = 0;
+		pr_efi_err(sys_table, "Unable to allocate memory for uncompressed kernel.\n");
+		return status;
+	}
+	*reserve_addr = alloc_addr;
+
+	/*
+	 * Relocate the zImage, so that it appears in the lowest 128 MB
+	 * memory window.
+	 */
+	*image_size = image->image_size;
+	status = efi_relocate_kernel(sys_table, image_addr, *image_size,
+				     *image_size,
+				     dram_base + MAX_UNCOMP_KERNEL_SIZE, 0);
+	if (status != EFI_SUCCESS) {
+		pr_efi_err(sys_table, "Failed to relocate kernel.\n");
+		efi_free(sys_table, *reserve_size, *reserve_addr);
+		*reserve_size = 0;
+		return status;
+	}
+
+	/*
+	 * Check to see if we were able to allocate memory low enough
+	 * in memory. The kernel determines the base of DRAM from the
+	 * address at which the zImage is loaded.
+	 */
+	if (*image_addr + *image_size > dram_base + ZIMAGE_OFFSET_LIMIT) {
+		pr_efi_err(sys_table, "Failed to relocate kernel, no low memory available.\n");
+		efi_free(sys_table, *reserve_size, *reserve_addr);
+		*reserve_size = 0;
+		efi_free(sys_table, *image_size, *image_addr);
+		*image_size = 0;
+		return EFI_LOAD_ERROR;
+	}
+	return EFI_SUCCESS;
+}

drivers/firmware/psci.c

@@ -13,6 +13,7 @@
 
 #define pr_fmt(fmt) "psci: " fmt
 
+#include <linux/arm-smccc.h>
 #include <linux/errno.h>
 #include <linux/linkage.h>
 #include <linux/of.h>
@@ -58,8 +59,6 @@ struct psci_operations psci_ops;
 
 typedef unsigned long (psci_fn)(unsigned long, unsigned long,
 				unsigned long, unsigned long);
-asmlinkage psci_fn __invoke_psci_fn_hvc;
-asmlinkage psci_fn __invoke_psci_fn_smc;
 static psci_fn *invoke_psci_fn;
 
 enum psci_function {
@@ -107,6 +106,26 @@ bool psci_power_state_is_valid(u32 state)
 	return !(state & ~valid_mask);
 }
 
+static unsigned long __invoke_psci_fn_hvc(unsigned long function_id,
+			unsigned long arg0, unsigned long arg1,
+			unsigned long arg2)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_hvc(function_id, arg0, arg1, arg2, 0, 0, 0, 0, &res);
+	return res.a0;
+}
+
+static unsigned long __invoke_psci_fn_smc(unsigned long function_id,
+			unsigned long arg0, unsigned long arg1,
+			unsigned long arg2)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_smc(function_id, arg0, arg1, arg2, 0, 0, 0, 0, &res);
+	return res.a0;
+}
+
 static int psci_to_linux_errno(int errno)
 {
 	switch (errno) {