Staging/IIO driver patches for 4.21-rc1

Here is the big staging and iio driver pull request for 4.21-rc1.
 
 Lots and lots of tiny patches here, nothing major at all.  Which is
 good, tiny cleanups is nice to see.  No new huge driver removal or
 addition, this release cycle, although there are lots of good IIO driver
 changes, addtions, and movement from staging into the "real" part of the
 kernel, which is always great.
 
 Full details are in the shortlog, and all of these have been in
 linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <[email protected]>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXCY93w8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymJRwCfeV0x/+IMS0UGh9ltHnUfCfR9bcgAmgPWMPnY
 bauRCLkceTjzODOR4SzH
 =o6Fs
 -----END PGP SIGNATURE-----

Merge tag 'staging-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO driver updates from Greg KH:
 "Here is the big staging and iio driver pull request for 4.21-rc1.

  Lots and lots of tiny patches here, nothing major at all. Which is
  good, tiny cleanups is nice to see. No new huge driver removal or
  addition, this release cycle, although there are lots of good IIO
  driver changes, addtions, and movement from staging into the "real"
  part of the kernel, which is always great.

  Full details are in the shortlog, and all of these have been in
  linux-next for a while with no reported issues"

* tag 'staging-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (553 commits)
  staging: mt7621-mmc: Correct spelling mistakes in comments
  staging: wilc1000: fix missing read_write setting when reading data
  mt7621-mmc: char * array declaration might be better as static const
  mt7621-mmc: return statement in void function unnecessary
  mt7621-mmc: Alignment should match open parenthesis
  mt7621-mmc: Removed unnecessary blank lines
  mt7621-mmc: Fix some coding style issues
  staging: android: ashmem: doc: Fix spelling
  staging: rtl8188eu: cleanup brace coding style issues
  staging: rtl8188eu: add spaces around '&' in rtw_mlme_ext.c
  staging: rtl8188eu: change return type of is_basicrate() to bool
  staging: rtl8188eu: simplify null array initializations
  staging: rtl8188eu: change order of declarations to improve readability
  staging: rtl8188eu: make some arrays static in rtw_mlme_ext.c
  staging: rtl8188eu: constify some arrays
  staging: rtl8188eu: convert unsigned char arrays to u8
  staging: rtl8188eu: remove redundant declaration in rtw_mlme_ext.c
  staging: rtl8188eu: remove unused arrays WFD_OUI and WMM_INFO_OUI
  staging: rtl8188eu: remove unnecessary parentheses in rtw_mlme_ext.c
  staging: rtl8188eu: remove unnecessary comments in rtw_mlme_ext.c
  ...

Documentation/devicetree/bindings/iio/accel/lis302.txt

@@ -64,7 +64,7 @@ Optional properties for all bus drivers:
 
 Example for a SPI device node:
 
-	lis302@0 {
+	accelerometer@0 {
 		compatible = "st,lis302dl-spi";
 		reg = <0>;
 		spi-max-frequency = <1000000>;
@@ -89,7 +89,7 @@ Example for a SPI device node:
 
 Example for a I2C device node:
 
-	lis331dlh: lis331dlh@18 {
+	lis331dlh: accelerometer@18 {
 		compatible = "st,lis331dlh", "st,lis3lv02d";
 		reg = <0x18>;
 		Vdd-supply = <&lis3_reg>;

Documentation/devicetree/bindings/iio/adc/ad7949.txt

@@ -0,0 +1,16 @@
+* Analog Devices AD7949/AD7682/AD7689
+
+Required properties:
+ - compatible: Should be one of
+	* "adi,ad7949"
+	* "adi,ad7682"
+	* "adi,ad7689"
+ - reg: spi chip select number for the device
+ - vref-supply: The regulator supply for ADC reference voltage
+
+Example:
+adc@0 {
+	compatible = "adi,ad7949";
+	reg = <0>;
+	vref-supply = <&vdd_supply>;
+};

Documentation/devicetree/bindings/iio/adc/adc.txt

@@ -0,0 +1,23 @@
+Common ADCs properties
+
+Optional properties for child nodes:
+- bipolar : Boolean, if set the channel is used in bipolar mode.
+- diff-channels : Differential channels muxed for this ADC. The first value
+		specifies the positive input pin, the second value the negative
+		input pin.
+
+Example:
+	adc@0 {
+		compatible = "some,adc";
+		...
+		channel@0 {
+			bipolar;
+			diff-channels = <0 1>;
+			...
+		};
+
+		channel@1 {
+			diff-channels = <2 3>;
+			...
+		};
+	};

Documentation/devicetree/bindings/iio/adc/adi,ad7124.txt

@@ -0,0 +1,75 @@
+Analog Devices AD7124 ADC device driver
+
+Required properties for the AD7124:
+	- compatible: Must be one of "adi,ad7124-4" or "adi,ad7124-8"
+	- reg: SPI chip select number for the device
+	- spi-max-frequency: Max SPI frequency to use
+		see: Documentation/devicetree/bindings/spi/spi-bus.txt
+	- clocks: phandle to the master clock (mclk)
+		see: Documentation/devicetree/bindings/clock/clock-bindings.txt
+	- clock-names: Must be "mclk".
+	- interrupts: IRQ line for the ADC
+		see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+
+	  Required properties:
+		* #address-cells: Must be 1.
+		* #size-cells: Must be 0.
+
+	  Subnode(s) represent the external channels which are connected to the ADC.
+	  Each subnode represents one channel and has the following properties:
+		Required properties:
+			* reg: The channel number. It can have up to 4 channels on ad7124-4
+			  and 8 channels on ad7124-8, numbered from 0 to 15.
+			* diff-channels: see: Documentation/devicetree/bindings/iio/adc/adc.txt
+
+		Optional properties:
+			* bipolar: see: Documentation/devicetree/bindings/iio/adc/adc.txt
+			* adi,reference-select: Select the reference source to use when
+			  converting on the the specific channel. Valid values are:
+			  0: REFIN1(+)/REFIN1(−).
+			  1: REFIN2(+)/REFIN2(−).
+			  3: AVDD
+			  If this field is left empty, internal reference is selected.
+
+Optional properties:
+	- refin1-supply: refin1 supply can be used as reference for conversion.
+	- refin2-supply: refin2 supply can be used as reference for conversion.
+	- avdd-supply: avdd supply can be used as reference for conversion.
+
+Example:
+	adc@0 {
+		compatible = "adi,ad7124-4";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		interrupts = <25 2>;
+		interrupt-parent = <&gpio>;
+		refin1-supply = <&adc_vref>;
+		clocks = <&ad7124_mclk>;
+		clock-names = "mclk";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@0 {
+			reg = <0>;
+			diff-channels = <0 1>;
+			adi,reference-select = <0>;
+		};
+
+		channel@1 {
+			reg = <1>;
+			bipolar;
+			diff-channels = <2 3>;
+			adi,reference-select = <0>;
+		};
+
+		channel@2 {
+			reg = <2>;
+			diff-channels = <4 5>;
+		};
+
+		channel@3 {
+			reg = <3>;
+			diff-channels = <6 7>;
+		};
+	};

Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt

@@ -22,6 +22,12 @@ Required properties:
 - vref-supply:	the regulator supply for the ADC reference voltage
 - #io-channel-cells: must be 1, see ../iio-bindings.txt
 
+Optional properties:
+- nvmem-cells:		phandle to the temperature_calib eFuse cells
+- nvmem-cell-names:	if present (to enable the temperature sensor
+			calibration) this must contain "temperature_calib"
+
+
 Example:
 	saradc: adc@8680 {
 		compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";

Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt

@@ -11,7 +11,7 @@ New driver handles the following
 
 Required properties:
 - compatible:		Must be "samsung,exynos-adc-v1"
-				for exynos4412/5250 and s5pv210 controllers.
+				for exynos4412/5250 controllers.
 			Must be "samsung,exynos-adc-v2" for
 				future controllers.
 			Must be "samsung,exynos3250-adc" for
@@ -28,6 +28,8 @@ Required properties:
 				the ADC in s3c2443 and compatibles
 			Must be "samsung,s3c6410-adc" for
 				the ADC in s3c6410 and compatibles
+			Must be "samsung,s5pv210-adc" for
+				the ADC in s5pv210 and compatibles
 - reg:			List of ADC register address range
 			- The base address and range of ADC register
 			- The base address and range of ADC_PHY register (every

Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt

@@ -1,7 +1,14 @@
 * Texas Instruments' ADC128S052, ADC122S021 and ADC124S021 ADC chip
 
 Required properties:
- - compatible: Should be "ti,adc128s052", "ti,adc122s021" or "ti,adc124s021"
+ - compatible: Should be one of:
+   - "ti,adc128s052"
+   - "ti,adc122s021"
+   - "ti,adc122s051"
+   - "ti,adc122s101"
+   - "ti,adc124s021"
+   - "ti,adc124s051"
+   - "ti,adc124s101"
  - reg: spi chip select number for the device
  - vref-supply: The regulator supply for ADC reference voltage
 

Documentation/devicetree/bindings/iio/dac/ti,dac7311.txt

@@ -0,0 +1,23 @@
+TI DAC7311 device tree bindings
+
+Required properties:
+- compatible: must be set to:
+	* "ti,dac7311"
+	* "ti,dac6311"
+	* "ti,dac5311"
+- reg: spi chip select number for the device
+- vref-supply: The regulator supply for ADC reference voltage
+
+Optional properties:
+- spi-max-frequency: Max SPI frequency to use
+
+Example:
+
+	spi_master {
+		dac@0 {
+			compatible = "ti,dac7311";
+			reg = <0>; /* CS0 */
+			spi-max-frequency = <1000000>;
+			vref-supply = <&vdd_supply>;
+		};
+	};

Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt

@@ -13,6 +13,7 @@ Required properties:
 Optional properties:
 - st,drdy-int-pin: the pin on the package that will be used to signal
   "data ready" (valid values: 1 or 2).
+- st,pullups : enable/disable internal i2c controller pullup resistors.
 - drive-open-drain: the interrupt/data ready line will be configured
   as open drain, which is useful if several sensors share the same
   interrupt line. This is a boolean property.

Documentation/devicetree/bindings/iio/light/vcnl4035.txt

@@ -0,0 +1,18 @@
+VISHAY VCNL4035 -  Ambient Light and proximity sensor
+
+Link to datasheet: https://www.vishay.com/docs/84251/vcnl4035x01.pdf
+
+Required properties:
+
+	-compatible: should be "vishay,vcnl4035"
+	-reg: I2C address of the sensor, should be 0x60
+	-interrupts: interrupt mapping for GPIO IRQ (level active low)
+
+Example:
+
+light-sensor@60 {
+	compatible = "vishay,vcnl4035";
+	reg = <0x60>;
+	interrupt-parent = <&gpio4>;
+	interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};

Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.txt

@@ -0,0 +1,20 @@
+* PNI RM3100 3-axis magnetometer sensor
+
+Required properties:
+
+- compatible : should be "pni,rm3100"
+- reg : the I2C address or SPI chip select number of the sensor.
+
+Optional properties:
+
+- interrupts: data ready (DRDY) from the chip.
+  The interrupts can be triggered on level high.
+
+Example:
+
+rm3100: rm3100@20 {
+	compatible = "pni,rm3100";
+	reg = <0x20>;
+	interrupt-parent = <&gpio0>;
+	interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+};

Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt

@@ -0,0 +1,28 @@
+* Microchip MCP41010/41050/41100/42010/42050/42100 Digital Potentiometer
+
+Datasheet publicly available at:
+http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
+
+The node for this driver must be a child node of a SPI controller, hence
+all mandatory properties described in
+
+        Documentation/devicetree/bindings/spi/spi-bus.txt
+
+must be specified.
+
+Required properties:
+	- compatible:  	Must be one of the following, depending on the
+			model:
+			"microchip,mcp41010"
+			"microchip,mcp41050"
+			"microchip,mcp41100"
+			"microchip,mcp42010"
+			"microchip,mcp42050"
+			"microchip,mcp42100"
+
+Example:
+potentiometer@0 {
+	compatible = "microchip,mcp41010";
+	reg = <0>;
+	spi-max-frequency = <500000>;
+};

Documentation/devicetree/bindings/iio/resolver/ad2s90.txt

@@ -0,0 +1,31 @@
+Analog Devices AD2S90 Resolver-to-Digital Converter
+
+https://www.analog.com/en/products/ad2s90.html
+
+Required properties:
+  - compatible: should be "adi,ad2s90"
+  - reg: SPI chip select number for the device
+  - spi-max-frequency: set maximum clock frequency, must be 830000
+  - spi-cpol and spi-cpha:
+        Either SPI mode (0,0) or (1,1) must be used, so specify none or both of
+        spi-cpha, spi-cpol.
+
+See for more details:
+    Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Note about max frequency:
+    Chip's max frequency, as specified in its datasheet, is 2Mhz. But a 600ns
+    delay is expected between the application of a logic LO to CS and the
+    application of SCLK, as also specified. And since the delay is not
+    implemented in the spi code, to satisfy it, SCLK's period should be at most
+    2 * 600ns, so the max frequency should be 1 / (2 * 6e-7), which gives
+    roughly 830000Hz.
+
+Example:
+resolver@0 {
+	compatible = "adi,ad2s90";
+	reg = <0>;
+	spi-max-frequency = <830000>;
+	spi-cpol;
+	spi-cpha;
+};

Documentation/devicetree/bindings/iio/st-sensors.txt

@@ -48,6 +48,7 @@ Accelerometers:
 - st,lis3l02dq
 - st,lis2dw12
 - st,lis3dhh
+- st,lis3de
 
 Gyroscopes:
 - st,l3g4200d-gyro
@@ -67,6 +68,7 @@ Magnetometers:
 - st,lsm303dlm-magn
 - st,lis3mdl-magn
 - st,lis2mdl
+- st,lsm9ds1-magn
 
 Pressure sensors:
 - st,lps001wp-press

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -305,6 +305,7 @@ pixcir  PIXCIR MICROELECTRONICS Co., Ltd
 plathome	Plat'Home Co., Ltd.
 plda	PLDA
 plx	Broadcom Corporation (formerly PLX Technology)
+pni	PNI Sensor Corporation
 portwell	Portwell Inc.
 poslab	Poslab Technology Co., Ltd.
 powervr	PowerVR (deprecated, use img)
@@ -417,6 +418,7 @@ vamrs	Vamrs Ltd.
 variscite	Variscite Ltd.
 via	VIA Technologies, Inc.
 virtio	Virtual I/O Device Specification, developed by the OASIS consortium
+vishay	Vishay Intertechnology, Inc
 vitesse	Vitesse Semiconductor Corporation
 vivante	Vivante Corporation
 vocore VoCore Studio