Merge "Merge android-5.4-stable.50 (a200ad5) into msm-5.4"

drivers/tty/n_gsm.c

@@ -665,11 +665,10 @@ static struct gsm_msg *gsm_data_alloc(struct gsm_mux *gsm, u8 addr, int len,
  *	FIXME: lock against link layer control transmissions
  */
 
-static void gsm_data_kick(struct gsm_mux *gsm)
+static void gsm_data_kick(struct gsm_mux *gsm, struct gsm_dlci *dlci)
 {
 	struct gsm_msg *msg, *nmsg;
 	int len;
-	int skip_sof = 0;
 
 	list_for_each_entry_safe(msg, nmsg, &gsm->tx_list, list) {
 		if (gsm->constipated && msg->addr)
@@ -691,18 +690,23 @@ static void gsm_data_kick(struct gsm_mux *gsm)
 			print_hex_dump_bytes("gsm_data_kick: ",
 					     DUMP_PREFIX_OFFSET,
 					     gsm->txframe, len);
-
-		if (gsm->output(gsm, gsm->txframe + skip_sof,
-						len - skip_sof) < 0)
+		if (gsm->output(gsm, gsm->txframe, len) < 0)
 			break;
 		/* FIXME: Can eliminate one SOF in many more cases */
 		gsm->tx_bytes -= msg->len;
-		/* For a burst of frames skip the extra SOF within the
-		   burst */
-		skip_sof = 1;
 
 		list_del(&msg->list);
 		kfree(msg);
+
+		if (dlci) {
+			tty_port_tty_wakeup(&dlci->port);
+		} else {
+			int i = 0;
+
+			for (i = 0; i < NUM_DLCI; i++)
+				if (gsm->dlci[i])
+					tty_port_tty_wakeup(&gsm->dlci[i]->port);
+		}
 	}
 }
 
@@ -754,7 +758,7 @@ static void __gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg)
 	/* Add to the actual output queue */
 	list_add_tail(&msg->list, &gsm->tx_list);
 	gsm->tx_bytes += msg->len;
-	gsm_data_kick(gsm);
+	gsm_data_kick(gsm, dlci);
 }
 
 /**
@@ -1215,7 +1219,7 @@ static void gsm_control_message(struct gsm_mux *gsm, unsigned int command,
 		gsm_control_reply(gsm, CMD_FCON, NULL, 0);
 		/* Kick the link in case it is idling */
 		spin_lock_irqsave(&gsm->tx_lock, flags);
-		gsm_data_kick(gsm);
+		gsm_data_kick(gsm, NULL);
 		spin_unlock_irqrestore(&gsm->tx_lock, flags);
 		break;
 	case CMD_FCOFF:
@@ -2525,7 +2529,7 @@ static void gsmld_write_wakeup(struct tty_struct *tty)
 	/* Queue poll */
 	clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
 	spin_lock_irqsave(&gsm->tx_lock, flags);
-	gsm_data_kick(gsm);
+	gsm_data_kick(gsm, NULL);
 	if (gsm->tx_bytes < TX_THRESH_LO) {
 		gsm_dlci_data_sweep(gsm);
 	}

drivers/tty/serial/8250/8250_core.c

@@ -1026,7 +1026,7 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
 			gpios = mctrl_gpio_init(&uart->port, 0);
 			if (IS_ERR(gpios)) {
 				ret = PTR_ERR(gpios);
-				goto out_unlock;
+				goto err;
 			} else {
 				uart->gpios = gpios;
 			}
@@ -1075,8 +1075,10 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
 			serial8250_apply_quirks(uart);
 			ret = uart_add_one_port(&serial8250_reg,
 						&uart->port);
-			if (ret == 0)
-				ret = uart->port.line;
+			if (ret)
+				goto err;
+
+			ret = uart->port.line;
 		} else {
 			dev_info(uart->port.dev,
 				"skipping CIR port at 0x%lx / 0x%llx, IRQ %d\n",
@@ -1098,10 +1100,14 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
 		}
 	}
 
-out_unlock:
 	mutex_unlock(&serial_mutex);
 
 	return ret;
+
+err:
+	uart->port.dev = NULL;
+	mutex_unlock(&serial_mutex);
+	return ret;
 }
 EXPORT_SYMBOL(serial8250_register_8250_port);
 

drivers/tty/serial/8250/8250_pci.c

@@ -1871,12 +1871,6 @@ pci_moxa_setup(struct serial_private *priv,
 #define PCIE_DEVICE_ID_WCH_CH384_4S	0x3470
 #define PCIE_DEVICE_ID_WCH_CH382_2S	0x3253
 
-#define PCI_VENDOR_ID_PERICOM			0x12D8
-#define PCI_DEVICE_ID_PERICOM_PI7C9X7951	0x7951
-#define PCI_DEVICE_ID_PERICOM_PI7C9X7952	0x7952
-#define PCI_DEVICE_ID_PERICOM_PI7C9X7954	0x7954
-#define PCI_DEVICE_ID_PERICOM_PI7C9X7958	0x7958
-
 #define PCI_VENDOR_ID_ACCESIO			0x494f
 #define PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SDB	0x1051
 #define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2S	0x1053

drivers/tty/serial/8250/8250_port.c

@@ -2539,6 +2539,8 @@ static unsigned int serial8250_get_baud_rate(struct uart_port *port,
 					     struct ktermios *termios,
 					     struct ktermios *old)
 {
+	unsigned int tolerance = port->uartclk / 100;
+
 	/*
 	 * Ask the core to calculate the divisor for us.
 	 * Allow 1% tolerance at the upper limit so uart clks marginally
@@ -2547,7 +2549,7 @@ static unsigned int serial8250_get_baud_rate(struct uart_port *port,
 	 */
 	return uart_get_baud_rate(port, termios, old,
 				  port->uartclk / 16 / UART_DIV_MAX,
-				  port->uartclk);
+				  (port->uartclk + tolerance) / 16);
 }
 
 void

drivers/tty/serial/amba-pl011.c

@@ -2585,6 +2585,7 @@ static int pl011_setup_port(struct device *dev, struct uart_amba_port *uap,
 	uap->port.fifosize = uap->fifosize;
 	uap->port.flags = UPF_BOOT_AUTOCONF;
 	uap->port.line = index;
+	spin_lock_init(&uap->port.lock);
 
 	amba_ports[index] = uap;
 

drivers/tty/serial/kgdboc.c

@@ -20,6 +20,7 @@
 #include <linux/vt_kern.h>
 #include <linux/input.h>
 #include <linux/module.h>
+#include <linux/platform_device.h>
 
 #define MAX_CONFIG_LEN		40
 
@@ -27,6 +28,7 @@ static struct kgdb_io		kgdboc_io_ops;
 
 /* -1 = init not run yet, 0 = unconfigured, 1 = configured. */
 static int configured		= -1;
+static DEFINE_MUTEX(config_mutex);
 
 static char config[MAX_CONFIG_LEN];
 static struct kparam_string kps = {
@@ -38,6 +40,8 @@ static int kgdboc_use_kms;  /* 1 if we use kernel mode switching */
 static struct tty_driver	*kgdb_tty_driver;
 static int			kgdb_tty_line;
 
+static struct platform_device *kgdboc_pdev;
+
 #ifdef CONFIG_KDB_KEYBOARD
 static int kgdboc_reset_connect(struct input_handler *handler,
 				struct input_dev *dev,
@@ -133,11 +137,13 @@ static void kgdboc_unregister_kbd(void)
 
 static void cleanup_kgdboc(void)
 {
+	if (configured != 1)
+		return;
+
 	if (kgdb_unregister_nmi_console())
 		return;
 	kgdboc_unregister_kbd();
-	if (configured == 1)
-		kgdb_unregister_io_module(&kgdboc_io_ops);
+	kgdb_unregister_io_module(&kgdboc_io_ops);
 }
 
 static int configure_kgdboc(void)
@@ -200,20 +206,79 @@ nmi_con_failed:
 	kgdb_unregister_io_module(&kgdboc_io_ops);
 noconfig:
 	kgdboc_unregister_kbd();
-	config[0] = 0;
 	configured = 0;
-	cleanup_kgdboc();
 
 	return err;
 }
 
+static int kgdboc_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+
+	mutex_lock(&config_mutex);
+	if (configured != 1) {
+		ret = configure_kgdboc();
+
+		/* Convert "no device" to "defer" so we'll keep trying */
+		if (ret == -ENODEV)
+			ret = -EPROBE_DEFER;
+	}
+	mutex_unlock(&config_mutex);
+
+	return ret;
+}
+
+static struct platform_driver kgdboc_platform_driver = {
+	.probe = kgdboc_probe,
+	.driver = {
+		.name = "kgdboc",
+		.suppress_bind_attrs = true,
+	},
+};
+
 static int __init init_kgdboc(void)
 {
-	/* Already configured? */
-	if (configured == 1)
+	int ret;
+
+	/*
+	 * kgdboc is a little bit of an odd "platform_driver".  It can be
+	 * up and running long before the platform_driver object is
+	 * created and thus doesn't actually store anything in it.  There's
+	 * only one instance of kgdb so anything is stored as global state.
+	 * The platform_driver is only created so that we can leverage the
+	 * kernel's mechanisms (like -EPROBE_DEFER) to call us when our
+	 * underlying tty is ready.  Here we init our platform driver and
+	 * then create the single kgdboc instance.
+	 */
+	ret = platform_driver_register(&kgdboc_platform_driver);
+	if (ret)
+		return ret;
+
+	kgdboc_pdev = platform_device_alloc("kgdboc", PLATFORM_DEVID_NONE);
+	if (!kgdboc_pdev) {
+		ret = -ENOMEM;
+		goto err_did_register;
+	}
+
+	ret = platform_device_add(kgdboc_pdev);
+	if (!ret)
 		return 0;
 
-	return configure_kgdboc();
+	platform_device_put(kgdboc_pdev);
+
+err_did_register:
+	platform_driver_unregister(&kgdboc_platform_driver);
+	return ret;
+}
+
+static void exit_kgdboc(void)
+{
+	mutex_lock(&config_mutex);
+	cleanup_kgdboc();
+	mutex_unlock(&config_mutex);
+
+	platform_device_unregister(kgdboc_pdev);
+	platform_driver_unregister(&kgdboc_platform_driver);
 }
 
 static int kgdboc_get_char(void)
@@ -236,24 +301,20 @@ static int param_set_kgdboc_var(const char *kmessage,
 				const struct kernel_param *kp)
 {
 	size_t len = strlen(kmessage);
+	int ret = 0;
 
 	if (len >= MAX_CONFIG_LEN) {
 		pr_err("config string too long\n");
 		return -ENOSPC;
 	}
 
-	/* Only copy in the string if the init function has not run yet */
-	if (configured < 0) {
-		strcpy(config, kmessage);
-		return 0;
-	}
-
 	if (kgdb_connected) {
 		pr_err("Cannot reconfigure while KGDB is connected.\n");
-
 		return -EBUSY;
 	}
 
+	mutex_lock(&config_mutex);
+
 	strcpy(config, kmessage);
 	/* Chop out \n char as a result of echo */
 	if (len && config[len - 1] == '\n')
@@ -262,8 +323,30 @@ static int param_set_kgdboc_var(const char *kmessage,
 	if (configured == 1)
 		cleanup_kgdboc();
 
-	/* Go and configure with the new params. */
-	return configure_kgdboc();
+	/*
+	 * Configure with the new params as long as init already ran.
+	 * Note that we can get called before init if someone loads us
+	 * with "modprobe kgdboc kgdboc=..." or if they happen to use the
+	 * the odd syntax of "kgdboc.kgdboc=..." on the kernel command.
+	 */
+	if (configured >= 0)
+		ret = configure_kgdboc();
+
+	/*
+	 * If we couldn't configure then clear out the config.  Note that
+	 * specifying an invalid config on the kernel command line vs.
+	 * through sysfs have slightly different behaviors.  If we fail
+	 * to configure what was specified on the kernel command line
+	 * we'll leave it in the 'config' and return -EPROBE_DEFER from
+	 * our probe.  When specified through sysfs userspace is
+	 * responsible for loading the tty driver before setting up.
+	 */
+	if (ret)
+		config[0] = '\0';
+
+	mutex_unlock(&config_mutex);
+
+	return ret;
 }
 
 static int dbg_restore_graphics;
@@ -326,15 +409,8 @@ __setup("kgdboc=", kgdboc_option_setup);
 /* This is only available if kgdboc is a built in for early debugging */
 static int __init kgdboc_early_init(char *opt)
 {
-	/* save the first character of the config string because the
-	 * init routine can destroy it.
-	 */
-	char save_ch;
-
 	kgdboc_option_setup(opt);
-	save_ch = config[0];
-	init_kgdboc();
-	config[0] = save_ch;
+	configure_kgdboc();
 	return 0;
 }
 
@@ -342,7 +418,7 @@ early_param("ekgdboc", kgdboc_early_init);
 #endif /* CONFIG_KGDB_SERIAL_CONSOLE */
 
 module_init(init_kgdboc);
-module_exit(cleanup_kgdboc);
+module_exit(exit_kgdboc);
 module_param_call(kgdboc, param_set_kgdboc_var, param_get_string, &kps, 0644);
 MODULE_PARM_DESC(kgdboc, "<serial_device>[,baud]");
 MODULE_DESCRIPTION("KGDB Console TTY Driver");

drivers/tty/vt/keyboard.c

@@ -127,7 +127,11 @@ static DEFINE_SPINLOCK(func_buf_lock); /* guard 'func_buf'  and friends */
 static unsigned long key_down[BITS_TO_LONGS(KEY_CNT)];	/* keyboard key bitmap */
 static unsigned char shift_down[NR_SHIFT];		/* shift state counters.. */
 static bool dead_key_next;
-static int npadch = -1;					/* -1 or number assembled on pad */
+
+/* Handles a number being assembled on the number pad */
+static bool npadch_active;
+static unsigned int npadch_value;
+
 static unsigned int diacr;
 static char rep;					/* flag telling character repeat */
 
@@ -845,12 +849,12 @@ static void k_shift(struct vc_data *vc, unsigned char value, char up_flag)
 		shift_state &= ~(1 << value);
 
 	/* kludge */
-	if (up_flag && shift_state != old_state && npadch != -1) {
+	if (up_flag && shift_state != old_state && npadch_active) {
 		if (kbd->kbdmode == VC_UNICODE)
-			to_utf8(vc, npadch);
+			to_utf8(vc, npadch_value);
 		else
-			put_queue(vc, npadch & 0xff);
-		npadch = -1;
+			put_queue(vc, npadch_value & 0xff);
+		npadch_active = false;
 	}
 }
 
@@ -868,7 +872,7 @@ static void k_meta(struct vc_data *vc, unsigned char value, char up_flag)
 
 static void k_ascii(struct vc_data *vc, unsigned char value, char up_flag)
 {
-	int base;
+	unsigned int base;
 
 	if (up_flag)
 		return;
@@ -882,10 +886,12 @@ static void k_ascii(struct vc_data *vc, unsigned char value, char up_flag)
 		base = 16;
 	}
 
-	if (npadch == -1)
-		npadch = value;
-	else
-		npadch = npadch * base + value;
+	if (!npadch_active) {
+		npadch_value = 0;
+		npadch_active = true;
+	}
+
+	npadch_value = npadch_value * base + value;
 }
 
 static void k_lock(struct vc_data *vc, unsigned char value, char up_flag)