Remove GENERIC_HARDIRQ config option

After the last architecture switched to generic hard irqs the config
options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code
for !CONFIG_GENERIC_HARDIRQS can be removed.

Signed-off-by: Martin Schwidefsky <[email protected]>

drivers/mfd/Kconfig

@@ -23,7 +23,7 @@ config MFD_AS3711
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	help
 	  Support for the AS3711 PMIC from AMS
 
@@ -40,7 +40,7 @@ config PMIC_ADP5520
 config MFD_AAT2870_CORE
 	bool "AnalogicTech AAT2870"
 	select MFD_CORE
-	depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
+	depends on I2C=y && GPIOLIB
 	help
 	  If you say yes here you get support for the AAT2870.
 	  This driver provides common support for accessing the device,
@@ -78,7 +78,7 @@ config MFD_CROS_EC_SPI
 
 config MFD_ASIC3
 	bool "Compaq ASIC3"
-	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
+	depends on GPIOLIB && ARM
 	select MFD_CORE
 	 ---help---
 	  This driver supports the ASIC3 multifunction chip found on many
@@ -104,7 +104,7 @@ config MFD_DA9052_SPI
 	select REGMAP_SPI
 	select REGMAP_IRQ
 	select PMIC_DA9052
-	depends on SPI_MASTER=y && GENERIC_HARDIRQS
+	depends on SPI_MASTER=y
 	help
 	  Support for the Dialog Semiconductor DA9052 PMIC
 	  when controlled using SPI. This driver provides common support
@@ -116,7 +116,7 @@ config MFD_DA9052_I2C
 	select REGMAP_I2C
 	select REGMAP_IRQ
 	select PMIC_DA9052
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	help
 	  Support for the Dialog Semiconductor DA9052 PMIC
 	  when controlled using I2C. This driver provides common support
@@ -128,7 +128,7 @@ config MFD_DA9055
 	select REGMAP_I2C
 	select REGMAP_IRQ
 	select MFD_CORE
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	help
 	  Say yes here for support of Dialog Semiconductor DA9055. This is
 	  a Power Management IC. This driver provides common support for
@@ -144,7 +144,7 @@ config MFD_DA9063
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	help
 	  Say yes here for support for the Dialog Semiconductor DA9063 PMIC.
 	  This includes the I2C driver and core APIs.
@@ -156,7 +156,7 @@ config MFD_MC13783
 
 config MFD_MC13XXX
 	tristate
-	depends on (SPI_MASTER || I2C) && GENERIC_HARDIRQS
+	depends on (SPI_MASTER || I2C)
 	select MFD_CORE
 	select MFD_MC13783
 	help
@@ -167,7 +167,7 @@ config MFD_MC13XXX
 
 config MFD_MC13XXX_SPI
 	tristate "Freescale MC13783 and MC13892 SPI interface"
-	depends on SPI_MASTER && GENERIC_HARDIRQS
+	depends on SPI_MASTER
 	select REGMAP_SPI
 	select MFD_MC13XXX
 	help
@@ -175,7 +175,7 @@ config MFD_MC13XXX_SPI
 
 config MFD_MC13XXX_I2C
 	tristate "Freescale MC13892 I2C interface"
-	depends on I2C && GENERIC_HARDIRQS
+	depends on I2C
 	select REGMAP_I2C
 	select MFD_MC13XXX
 	help
@@ -183,7 +183,7 @@ config MFD_MC13XXX_I2C
 
 config HTC_EGPIO
 	bool "HTC EGPIO support"
-	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
+	depends on GPIOLIB && ARM
 	help
 	    This driver supports the CPLD egpio chip present on
 	    several HTC phones.  It provides basic support for input
@@ -192,7 +192,6 @@ config HTC_EGPIO
 config HTC_PASIC3
 	tristate "HTC PASIC3 LED/DS1WM chip support"
 	select MFD_CORE
-	depends on GENERIC_HARDIRQS
 	help
 	  This core driver provides register access for the LED/DS1WM
 	  chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
@@ -210,7 +209,7 @@ config HTC_I2CPLD
 
 config LPC_ICH
 	tristate "Intel ICH LPC"
-	depends on PCI && GENERIC_HARDIRQS
+	depends on PCI
 	select MFD_CORE
 	help
 	  The LPC bridge function of the Intel ICH provides support for
@@ -220,7 +219,7 @@ config LPC_ICH
 
 config LPC_SCH
 	tristate "Intel SCH LPC"
-	depends on PCI && GENERIC_HARDIRQS
+	depends on PCI
 	select MFD_CORE
 	help
 	  LPC bridge function of the Intel SCH provides support for
@@ -238,7 +237,7 @@ config MFD_INTEL_MSIC
 config MFD_JANZ_CMODIO
 	tristate "Janz CMOD-IO PCI MODULbus Carrier Board"
 	select MFD_CORE
-	depends on PCI && GENERIC_HARDIRQS
+	depends on PCI
 	help
 	  This is the core driver for the Janz CMOD-IO PCI MODULbus
 	  carrier board. This device is a PCI to MODULbus bridge which may
@@ -277,7 +276,7 @@ config MFD_KEMPLD
 
 config MFD_88PM800
 	tristate "Marvell 88PM800"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select REGMAP_I2C
 	select REGMAP_IRQ
 	select MFD_CORE
@@ -289,7 +288,7 @@ config MFD_88PM800
 
 config MFD_88PM805
 	tristate "Marvell 88PM805"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select REGMAP_I2C
 	select REGMAP_IRQ
 	select MFD_CORE
@@ -301,7 +300,7 @@ config MFD_88PM805
 
 config MFD_88PM860X
 	bool "Marvell 88PM8606/88PM8607"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select REGMAP_I2C
 	select MFD_CORE
 	help
@@ -312,7 +311,7 @@ config MFD_88PM860X
 
 config MFD_MAX77686
 	bool "Maxim Semiconductor MAX77686 PMIC Support"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select MFD_CORE
 	select REGMAP_I2C
 	select IRQ_DOMAIN
@@ -325,7 +324,7 @@ config MFD_MAX77686
 
 config MFD_MAX77693
 	bool "Maxim Semiconductor MAX77693 PMIC Support"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select MFD_CORE
 	select REGMAP_I2C
 	help
@@ -339,7 +338,7 @@ config MFD_MAX77693
 config MFD_MAX8907
 	tristate "Maxim Semiconductor MAX8907 PMIC Support"
 	select MFD_CORE
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select REGMAP_I2C
 	select REGMAP_IRQ
 	help
@@ -350,7 +349,7 @@ config MFD_MAX8907
 
 config MFD_MAX8925
 	bool "Maxim Semiconductor MAX8925 PMIC Support"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select MFD_CORE
 	help
 	  Say yes here to support for Maxim Semiconductor MAX8925. This is
@@ -360,7 +359,7 @@ config MFD_MAX8925
 
 config MFD_MAX8997
 	bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select MFD_CORE
 	select IRQ_DOMAIN
 	help
@@ -373,7 +372,7 @@ config MFD_MAX8997
 
 config MFD_MAX8998
 	bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select MFD_CORE
 	select IRQ_DOMAIN
 	help
@@ -385,7 +384,7 @@ config MFD_MAX8998
 
 config EZX_PCAP
 	bool "Motorola EZXPCAP Support"
-	depends on GENERIC_HARDIRQS && SPI_MASTER
+	depends on SPI_MASTER
 	help
 	  This enables the PCAP ASIC present on EZX Phones. This is
 	  needed for MMC, TouchScreen, Sound, USB, etc..
@@ -393,7 +392,7 @@ config EZX_PCAP
 config MFD_VIPERBOARD
         tristate "Nano River Technologies Viperboard"
 	select MFD_CORE
-	depends on USB && GENERIC_HARDIRQS
+	depends on USB
 	default n
 	help
 	  Say yes here if you want support for Nano River Technologies
@@ -407,7 +406,7 @@ config MFD_VIPERBOARD
 config MFD_RETU
 	tristate "Nokia Retu and Tahvo multi-function device"
 	select MFD_CORE
-	depends on I2C && GENERIC_HARDIRQS
+	depends on I2C
 	select REGMAP_IRQ
 	help
 	  Retu and Tahvo are a multi-function devices found on Nokia
@@ -480,7 +479,7 @@ config MFD_PM8XXX_IRQ
 config MFD_RDC321X
 	tristate "RDC R-321x southbridge"
 	select MFD_CORE
-	depends on PCI && GENERIC_HARDIRQS
+	depends on PCI
 	help
 	  Say yes here if you want to have support for the RDC R-321x SoC
 	  southbridge which provides access to GPIOs and Watchdog using the
@@ -488,7 +487,7 @@ config MFD_RDC321X
 
 config MFD_RTSX_PCI
 	tristate "Realtek PCI-E card reader"
-	depends on PCI && GENERIC_HARDIRQS
+	depends on PCI
 	select MFD_CORE
 	help
 	  This supports for Realtek PCI-Express card reader including rts5209,
@@ -498,7 +497,7 @@ config MFD_RTSX_PCI
 
 config MFD_RC5T583
 	bool "Ricoh RC5T583 Power Management system device"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select MFD_CORE
 	select REGMAP_I2C
 	help
@@ -512,7 +511,7 @@ config MFD_RC5T583
 
 config MFD_SEC_CORE
 	bool "SAMSUNG Electronics PMIC Series Support"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
@@ -555,7 +554,7 @@ config MFD_SM501_GPIO
 
 config MFD_SMSC
        bool "SMSC ECE1099 series chips"
-       depends on I2C=y && GENERIC_HARDIRQS
+       depends on I2C=y
        select MFD_CORE
        select REGMAP_I2C
        help
@@ -577,7 +576,7 @@ config ABX500_CORE
 
 config AB3100_CORE
 	bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
-	depends on I2C=y && ABX500_CORE && GENERIC_HARDIRQS
+	depends on I2C=y && ABX500_CORE
 	select MFD_CORE
 	default y if ARCH_U300
 	help
@@ -601,7 +600,7 @@ config AB3100_OTP
 
 config AB8500_CORE
 	bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
-	depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU
+	depends on ABX500_CORE && MFD_DB8500_PRCMU
 	select POWER_SUPPLY
 	select MFD_CORE
 	select IRQ_DOMAIN
@@ -639,7 +638,7 @@ config MFD_DB8500_PRCMU
 
 config MFD_STMPE
 	bool "STMicroelectronics STMPE"
-	depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS
+	depends on (I2C=y || SPI_MASTER=y)
 	select MFD_CORE
 	help
 	  Support for the STMPE family of I/O Expanders from
@@ -680,7 +679,7 @@ endmenu
 
 config MFD_STA2X11
 	bool "STMicroelectronics STA2X11"
-	depends on STA2X11 && GENERIC_HARDIRQS
+	depends on STA2X11
 	select MFD_CORE
 	select REGMAP_MMIO
 
@@ -700,7 +699,6 @@ config MFD_TI_AM335X_TSCADC
 	select MFD_CORE
 	select REGMAP
 	select REGMAP_MMIO
-	depends on GENERIC_HARDIRQS
 	help
 	  If you say yes here you get support for Texas Instruments series
 	  of Touch Screen /ADC chips.
@@ -717,7 +715,7 @@ config MFD_DM355EVM_MSP
 
 config MFD_LP8788
 	bool "TI LP8788 Power Management Unit Driver"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select MFD_CORE
 	select REGMAP_I2C
 	select IRQ_DOMAIN
@@ -739,14 +737,14 @@ config MFD_PALMAS
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	help
 	  If you say yes here you get support for the Palmas
 	  series of PMIC chips from Texas Instruments.
 
 config MFD_TI_SSP
 	tristate "TI Sequencer Serial Port support"
-	depends on ARCH_DAVINCI_TNETV107X && GENERIC_HARDIRQS
+	depends on ARCH_DAVINCI_TNETV107X
 	select MFD_CORE
 	---help---
 	  Say Y here if you want support for the Sequencer Serial Port
@@ -761,7 +759,6 @@ config TPS6105X
 	select REGULATOR
 	select MFD_CORE
 	select REGULATOR_FIXED_VOLTAGE
-	depends on GENERIC_HARDIRQS
 	help
 	  This option enables a driver for the TP61050/TPS61052
 	  high-power "white LED driver". This boost converter is
@@ -784,7 +781,7 @@ config TPS65010
 config TPS6507X
 	tristate "TI TPS6507x Power Management / Touch Screen chips"
 	select MFD_CORE
-	depends on I2C && GENERIC_HARDIRQS
+	depends on I2C
 	help
 	  If you say yes here you get support for the TPS6507x series of
 	  Power Management / Touch Screen chips.  These include voltage
@@ -798,7 +795,7 @@ config TPS65911_COMPARATOR
 
 config MFD_TPS65090
 	bool "TI TPS65090 Power Management chips"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
@@ -811,7 +808,7 @@ config MFD_TPS65090
 
 config MFD_TPS65217
 	tristate "TI TPS65217 Power Management / White LED chips"
-	depends on I2C && GENERIC_HARDIRQS
+	depends on I2C
 	select MFD_CORE
 	select REGMAP_I2C
 	help
@@ -826,7 +823,7 @@ config MFD_TPS65217
 
 config MFD_TPS6586X
 	bool "TI TPS6586x Power Management chips"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select MFD_CORE
 	select REGMAP_I2C
 	help
@@ -841,7 +838,7 @@ config MFD_TPS6586X
 
 config MFD_TPS65910
 	bool "TI TPS65910 Power Management chip"
-	depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
+	depends on I2C=y && GPIOLIB
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
@@ -862,7 +859,7 @@ config MFD_TPS65912_I2C
 	bool "TI TPS65912 Power Management chip with I2C"
 	select MFD_CORE
 	select MFD_TPS65912
-	depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
+	depends on I2C=y && GPIOLIB
 	help
 	  If you say yes here you get support for the TPS65912 series of
 	  PM chips with I2C interface.
@@ -871,14 +868,14 @@ config MFD_TPS65912_SPI
 	bool "TI TPS65912 Power Management chip with SPI"
 	select MFD_CORE
 	select MFD_TPS65912
-	depends on SPI_MASTER && GPIOLIB && GENERIC_HARDIRQS
+	depends on SPI_MASTER && GPIOLIB
 	help
 	  If you say yes here you get support for the TPS65912 series of
 	  PM chips with SPI interface.
 
 config MFD_TPS80031
 	bool "TI TPS80031/TPS80032 Power Management chips"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
@@ -892,7 +889,7 @@ config MFD_TPS80031
 
 config TWL4030_CORE
 	bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 Support"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select IRQ_DOMAIN
 	select REGMAP_I2C
 	help
@@ -931,13 +928,13 @@ config TWL4030_POWER
 
 config MFD_TWL4030_AUDIO
 	bool "TI TWL4030 Audio"
-	depends on TWL4030_CORE && GENERIC_HARDIRQS
+	depends on TWL4030_CORE
 	select MFD_CORE
 	default n
 
 config TWL6040_CORE
 	bool "TI TWL6040 audio codec"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
@@ -961,7 +958,7 @@ config MENELAUS
 
 config MFD_WL1273_CORE
 	tristate "TI WL1273 FM radio"
-	depends on I2C && GENERIC_HARDIRQS
+	depends on I2C
 	select MFD_CORE
 	default n
 	help
@@ -974,7 +971,6 @@ config MFD_LM3533
 	depends on I2C
 	select MFD_CORE
 	select REGMAP_I2C
-	depends on GENERIC_HARDIRQS
 	help
 	  Say yes here to enable support for National Semiconductor / TI
 	  LM3533 Lighting Power chips.
@@ -996,7 +992,7 @@ config MFD_TIMBERDALE
 
 config MFD_TC3589X
 	bool "Toshiba TC35892 and variants"
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select MFD_CORE
 	help
 	  Support for the Toshiba TC35892 and variants I/O Expander.
@@ -1011,7 +1007,7 @@ config MFD_TMIO
 
 config MFD_T7L66XB
 	bool "Toshiba T7L66XB"
-	depends on ARM && HAVE_CLK && GENERIC_HARDIRQS
+	depends on ARM && HAVE_CLK
 	select MFD_CORE
 	select MFD_TMIO
 	help
@@ -1036,7 +1032,7 @@ config MFD_TC6393XB
 
 config MFD_VX855
 	tristate "VIA VX855/VX875 integrated south bridge"
-	depends on PCI && GENERIC_HARDIRQS
+	depends on PCI
 	select MFD_CORE
 	help
 	  Say yes here to enable support for various functions of the
@@ -1054,7 +1050,7 @@ config MFD_ARIZONA_I2C
 	select MFD_ARIZONA
 	select MFD_CORE
 	select REGMAP_I2C
-	depends on I2C && GENERIC_HARDIRQS
+	depends on I2C
 	help
 	  Support for the Wolfson Microelectronics Arizona platform audio SoC
 	  core functionality controlled via I2C.
@@ -1064,7 +1060,7 @@ config MFD_ARIZONA_SPI
 	select MFD_ARIZONA
 	select MFD_CORE
 	select REGMAP_SPI
-	depends on SPI_MASTER && GENERIC_HARDIRQS
+	depends on SPI_MASTER
 	help
 	  Support for the Wolfson Microelectronics Arizona platform audio SoC
 	  core functionality controlled via I2C.
@@ -1090,7 +1086,7 @@ config MFD_WM8997
 config MFD_WM8400
 	bool "Wolfson Microelectronics WM8400"
 	select MFD_CORE
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select REGMAP_I2C
 	help
 	  Support for the Wolfson Microelecronics WM8400 PMIC and audio
@@ -1100,7 +1096,6 @@ config MFD_WM8400
 
 config MFD_WM831X
 	bool
-	depends on GENERIC_HARDIRQS
 
 config MFD_WM831X_I2C
 	bool "Wolfson Microelectronics WM831x/2x PMICs with I2C"
@@ -1108,7 +1103,7 @@ config MFD_WM831X_I2C
 	select MFD_WM831X
 	select REGMAP_I2C
 	select IRQ_DOMAIN
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	help
 	  Support for the Wolfson Microelecronics WM831x and WM832x PMICs
 	  when controlled using I2C.  This driver provides common support
@@ -1121,7 +1116,7 @@ config MFD_WM831X_SPI
 	select MFD_WM831X
 	select REGMAP_SPI
 	select IRQ_DOMAIN
-	depends on SPI_MASTER && GENERIC_HARDIRQS
+	depends on SPI_MASTER
 	help
 	  Support for the Wolfson Microelecronics WM831x and WM832x PMICs
 	  when controlled using SPI.  This driver provides common support
@@ -1130,12 +1125,11 @@ config MFD_WM831X_SPI
 
 config MFD_WM8350
 	bool
-	depends on GENERIC_HARDIRQS
 
 config MFD_WM8350_I2C
 	bool "Wolfson Microelectronics WM8350 with I2C"
 	select MFD_WM8350
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	help
 	  The WM8350 is an integrated audio and power management
 	  subsystem with watchdog and RTC functionality for embedded
@@ -1148,7 +1142,7 @@ config MFD_WM8994
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	help
 	  The WM8994 is a highly integrated hi-fi CODEC designed for
 	  smartphone applicatiosn.  As well as audio functionality it