From 9de1b2f8847741cfe006fac55e51b265326423e8 Mon Sep 17 00:00:00 2001
From: Kavya Nunna <knunna@qti.qualcomm.com>
Date: Mon, 9 Nov 2020 21:23:44 +0530
Subject: [PATCH] ARM: dts: msm: Add pmd9650 gpio nodes for SDXNIGHTJAR

Add pmd9650 nodes and include pmic devicetree files in
target specific files.

Change-Id: Ia19f577dc8a295dabd20ce4089dca553b9e881e8
---
 qcom/sdxnightjar-pinctrl.dtsi | 28 ++++++++++++++++++++++++++++
 qcom/sdxnightjar.dtsi         |  3 +++
 2 files changed, 31 insertions(+)

diff --git a/qcom/sdxnightjar-pinctrl.dtsi b/qcom/sdxnightjar-pinctrl.dtsi
index 410f4f9b0700..fe045ec0167e 100644
--- a/qcom/sdxnightjar-pinctrl.dtsi
+++ b/qcom/sdxnightjar-pinctrl.dtsi
@@ -1,3 +1,5 @@
+#include<dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
 &soc {
 	tlmm_pinmux: pinctrl@1000000 {
 		compatible = "qcom,sdxnightjar-pinctrl";
@@ -1333,3 +1335,29 @@
 		};
 	};
 };
+
+&pmd9650_gpios {
+	gpio@c100 { /* GPIO 2 - VADC */
+		/* GPIO should be left off, and in the high
+		 * impedance state when the pin is used with the VADC
+		 */
+		pins = "gpio2";
+		function = "normal";
+		bias-high-impedance;   /* DISABLE GPIO */
+	};
+
+	gpio@c200 { /* GPIO 3 - LED */
+		pins = "gpio3";
+		function = "normal";
+		bias-high-impedance;   /* DISABLE GPIO */
+	};
+
+	gpio@c400 { /* GPIO 5 - USB_ID */
+		pins = "gpio5";
+		function = "normal";
+		input-enable;        /* Digital input */
+		bias-pull-up;
+		qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_1P5>;	/* Pull up 1.5 uA */
+		power-source = <1>;     /* 1.8 V */
+	};
+};
diff --git a/qcom/sdxnightjar.dtsi b/qcom/sdxnightjar.dtsi
index ad15a0902055..622d46a7c381 100644
--- a/qcom/sdxnightjar.dtsi
+++ b/qcom/sdxnightjar.dtsi
@@ -426,4 +426,7 @@
 	};
 };
 
+#include "pmd9650.dtsi"
+#include "pmd9650-rpm-regulator.dtsi"
+#include "sdxnightjar-regulator.dtsi"
 #include "sdxnightjar-pinctrl.dtsi"