diff --git a/bindings/arm/msm/qcom,qsee_irq.txt b/bindings/arm/msm/qcom,qsee_irq.txt
new file mode 100644
index 000000000000..768fc416b738
--- /dev/null
+++ b/bindings/arm/msm/qcom,qsee_irq.txt
@@ -0,0 +1,82 @@
+Binding for the QTI Secure Execution Environment IRQ controller
+===============================================================
+
+The QTI Secure Execution Environment (QSEE) IRQ controller facilitates receiving
+and clearing interrupts from QSEE. Each interrupt from QSEE has a set of control
+registers to mask, clear and get the status of interrupts. This controller will
+create an interrupt for clients to register with based on the bits available in
+the control registers.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		    "qcom,sm8150-qsee-irq",
+		    "qcom,kona-qsee-irq"
+
+- syscon:
+	usage: required
+	Value type: <prop-encoded-array>
+	Definition: phandle to a syscon node representing the scsr registers
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded array>
+	Definition: multiple entries specifying the interrupts from QSEE
+
+- interrupt-names:
+	Usage: required
+	Value type: <string>
+	Definition: Interrupt names should be one of the following to map the
+		    interrupt back to the correct registers.
+		    - sp_ipc%d
+		    - sp_rmb
+
+- interrupt-controller:
+	Usage: required
+	Value type: <empty>
+	Definition: Identifies this node as an interrupt controller
+
+- #interrupt-cells
+	Usage: required
+	Value type: <u32>
+	Definition: must be 3 - for interrupts to encode these properties:
+		    - u32 denoting index of desired interrupt in @interrupts
+		    - u32 denoting bit of interrupt bank
+		    - u32 denoting IRQ flags
+
+= EXAMPLE
+The following example shows the QSEE_IRQ setup with the GLINK SPSS node, defined
+from the sm8150 apps processor's point-of-view. In this example the GLINK node
+registers for the sp_ipc0 interrupt(index 0 in interrupt-names) and the 0th
+bit on the sp_ipc0 interrupt bank.
+
+sp_scsr_block: syscon@1880000 {
+	compatible = “syscon”;
+	reg = <0x1880000 0x10000>;
+};
+
+intsp: qcom,qsee_irq {
+	compatible = "qcom,sm8150-qsee-irq";
+
+	syscon = <&sp_scsr_block>;
+	interrupts = <0 348 IRQ_TYPE_LEVEL_HIGH>,
+		     <0 349 IRQ_TYPE_LEVEL_HIGH>;
+
+	interrupt-names = "sp_ipc0",
+			  "sp_ipc1";
+
+	interrupt-controller;
+	#interrupt-cells = <3>;
+};
+
+spss {
+	...
+	glink {
+		qcom,remote-pid = <8>;
+		mboxes = <&sp_scsr 0>;
+		mbox-names = "spss_spss";
+		interrupts = <&intsp 0 0 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
diff --git a/bindings/arm/msm/qsee_ipc_irq_bridge.txt b/bindings/arm/msm/qsee_ipc_irq_bridge.txt
new file mode 100644
index 000000000000..442ad52b4bf6
--- /dev/null
+++ b/bindings/arm/msm/qsee_ipc_irq_bridge.txt
@@ -0,0 +1,30 @@
+Qualcomm Technologies, Inc. Secure Execution Environment IPC Interrupt Bridge
+
+[Root level node]
+Required properties:
+-compatible : should be "qcom,qsee-ipc-irq-bridge";
+
+[Second level nodes]
+qcom,qsee-ipc-irq-subsystem
+Required properties:
+-qcom,dev-name: the bridge device name
+-interrupt: IPC interrupt line from remote subsystem to QSEE
+-label : The name of this subsystem.
+
+Required properties if interrupt type is IRQ_TYPE_LEVEL_HIGH[4]:
+-qcom,rx-irq-clr : the register to clear the level triggered rx interrupt
+-qcom,rx-irq-clr-mask : the bitmask to clear the rx interrupt
+
+Example:
+
+	qcom,qsee_ipc_irq_bridge {
+		compatible = "qcom,qsee-ipc-irq-bridge";
+
+		qcom,qsee-ipc-irq-spss {
+			qcom,rx-irq-clr = <0x1d08008 0x4>;
+			qcom,rx-irq-clr-mask = <0x2>;
+			qcom,dev-name = "qsee_ipc_irq_spss";
+			interrupts = <0 349 4>;
+			label = "spss";
+		};
+	};