From 05d529cfbba43073d3d5e079ca1977413fef15bf Mon Sep 17 00:00:00 2001 From: houdz1 Date: Tue, 10 Nov 2020 18:22:08 +0800 Subject: [PATCH] Denver: dts/panel: bringup the second panel The second panel: TXD + BOE + nt36675 Change-Id: I35cab8a209465f3b512f8e4e5fa0fa6c1befb3b4 Signed-off-by: houdz1 Reviewed-on: https://gerrit.mot.com/1798724 SLTApproved: Slta Waiver SME-Granted: SME Approvals Granted Tested-by: Jira Key Reviewed-by: Huosheng Liao Reviewed-by: Shanshan Dai Submit-Approved: Jira Key --- qcom/denver-display.dtsi | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) diff --git a/qcom/denver-display.dtsi b/qcom/denver-display.dtsi index 6e18b47f2ea7..9dbca0806a6b 100644 --- a/qcom/denver-display.dtsi +++ b/qcom/denver-display.dtsi @@ -1,5 +1,6 @@ #include "dsi-panel-mot-auo-nt36675-fhd-video.dtsi" +#include "dsi-panel-mot-boe-nt36675-fhd-video.dtsi" #include "dsi-panel-mot-dummy-qhd-video.dtsi" @@ -109,6 +110,45 @@ }; }; +&dsi_nt36675_boe_video { + qcom,platform-te-gpio = <&tlmm 23 0>; + qcom,platform-reset-gpio = <&pm6150l_gpios 9 0>; + + qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; + + qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; + qcom,mdss-dsi-bl-min-level = <27>; + qcom,mdss-dsi-bl-max-level = <4095>; + qcom,mdss-dsi-bl-default-level = <2047>; + + qcom,esd-check-enabled; + qcom,mdss-dsi-panel-status-check-mode = "reg_read"; + qcom,mdss-dsi-panel-status-command = [06 01 00 01 00 00 01 0a]; + qcom,mdss-dsi-panel-status-command-state = "dsi_hs_mode"; + qcom,mdss-dsi-panel-status-value = <0x9c>; + qcom,mdss-dsi-panel-status-read-length = <1>; + + qcom,tp_state_check_enable; + + qcom,mdss-dsi-hbm-on-command = [39 01 00 00 00 00 03 51 0F FF]; + qcom,mdss-dsi-hbm-on-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-hbm-off-command = [39 01 00 00 00 00 03 51 0C CC]; + qcom,mdss-dsi-hbm-off-command-state = "dsi_lp_mode"; + qcom,mdss-dsi-hbm-type = "lcd-dcs-wled"; + + qcom,dsi-select-clocks = "mux_byte_clk0", "mux_pixel_clk0"; + qcom,mdss-dsi-t-clk-post = <0x0F>; + qcom,mdss-dsi-t-clk-pre = <0x37>; + qcom,mdss-dsi-display-timings { + timing@0 { + qcom,mdss-dsi-panel-phy-timings = [00 24 0A 0A 26 25 09 + 0A 06 02 04 00]; + qcom,display-topology = <1 0 1>; + qcom,default-topology-index = <0>; + }; + }; +}; + &mot_dummy_vid_qhd { qcom,platform-te-gpio = <&tlmm 23 0>; qcom,platform-reset-gpio = <&pm6150l_gpios 9 0>;