Bulk GPIO changes for the v4.10 kernel cycle:

Core changes:
 
 - Simplify threaded interrupt handling: instead of passing
   numbed parameters to gpiochip_irqchip_add_chained() we
   create a new call: gpiochip_irqchip_add_nested() so the two
   types are clearly semantically different. Also make sure
   that all nested chips call gpiochip_set_nested_irqchip()
   which is necessary for IRQ resend to work properly if
   it happens.
 
 - Return error on seek operations for the chardev.
 
 - Clamp values set as part of gpio[d]_direction_output() so
   that anything != 0 will be send down to the driver as "1"
   not the value passed in.
 
 - ACPI can now support naming of GPIO lines, hogs and holes
   in the GPIO lists.
 
 New drivers:
 
 - The SX150x driver was deemed unfit for the GPIO subsystem
   and was moved over to a combined GPIO+pinctrl driver in the
   pinctrl subsystem.
 
 New features:
 
 - Various cleanups to various drivers.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYTnG4AAoJEEEQszewGV1zbbsQAIxxsAobyQDnBaWyAJtVP33R
 mzoR5iBuWrN02rvWmYw8k3euj+2pH2Mxnl0FeezRQ5KomNLKeOghWM4VuMLPE+Mf
 hz/twZvMH3biTxWDzP5C6xsmqiCZbvqnHo0dClgGOphxwcxtRJd7nCVGssqBSVJ+
 FNoTvWhyEbF49fF1tPpKXSsjdYNNO8k119hu7QxwGQBde6zy2QbZd9fAZdjLGk1N
 nzn7Jah895nX95rUx37wwp2H8O6G3+ns1/uLzfnJRJ37+wWCxrr9Xx1peOErxpG9
 dwYYI3aNwR1/xYdMjAhJGDNqK7Jjt2w4c8vku/H5JDRoARCSfdFiTTvVBvEvU/Mq
 IQCMW8D0/cCp6wFGrjyX7lzrfZMh5byWeVID6GKi1wDUop+ed/MX7Et1fFKRuDPC
 s0FXE3onW9BJlT0zUANrt9fQRK+54g8VsUlHmZX1cu0VNCkCb51lqnc6WE5AMeqH
 1t2bB5U96pcebNKe0yJsOj2JdvBL/EEZVuJua5fEMIdwmEidZqthBV+rMqAfJhza
 t4G86q8qcyo98EgPVwVYILOOiOhXjk90SERh7MN/tiHmGVzJvoBmlQ+TYAxCTjFh
 X7s4DLGZWyT5duDBodZvkIqoz/yYNF6mPfyCok18yQkz/a0Zptr1dIxN1Vu3A8yl
 CEUfW/uTUtpTmmJd7jqI
 =2UpT
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Luinus Walleij:
 "Bulk GPIO changes for the v4.10 kernel cycle:

  Core changes:

   - Simplify threaded interrupt handling: instead of passing numbed
     parameters to gpiochip_irqchip_add_chained() we create a new call:
     gpiochip_irqchip_add_nested() so the two types are clearly
     semantically different. Also make sure that all nested chips call
     gpiochip_set_nested_irqchip() which is necessary for IRQ resend to
     work properly if it happens.

   - Return error on seek operations for the chardev.

   - Clamp values set as part of gpio[d]_direction_output() so that
     anything != 0 will be send down to the driver as "1" not the value
     passed in.

   - ACPI can now support naming of GPIO lines, hogs and holes in the
     GPIO lists.

  New drivers:

   - The SX150x driver was deemed unfit for the GPIO subsystem and was
     moved over to a combined GPIO+pinctrl driver in the pinctrl
     subsystem.

  New features:

   - Various cleanups to various drivers"

* tag 'gpio-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (49 commits)
  gpio: merrifield: Implement gpio_get_direction callback
  gpio: merrifield: Add support for hardware debouncer
  gpio: chardev: Return error for seek operations
  gpio: arizona: Tidy up probe error path
  gpio: arizona: Remove pointless set of platform drvdata
  gpio: pl061: delete platform data handling
  gpio: pl061: move platform data into driver
  gpio: pl061: rename variable from chip to pl061
  gpio: pl061: rename state container struct
  gpio: pl061: use local state for parent IRQ storage
  gpio: set explicit nesting on drivers
  gpio: simplify adding threaded interrupts
  gpio: vf610: use builtin_platform_driver
  gpio: axp209: use correct register for GPIO input status
  gpio: stmpe: fix interrupt handling bug
  gpio: em: depnd on ARCH_SHMOBILE
  gpio: zx: depend on ARCH_ZX
  gpio: x86: update config dependencies for x86 specific hardware
  gpio: mb86s7x: use builtin_platform_driver
  gpio: etraxfs: use builtin_platform_driver
  ...

Documentation/acpi/gpio-properties.txt

@@ -51,6 +51,68 @@ it to 1 marks the GPIO as active low.
 In our Bluetooth example the "reset-gpios" refers to the second GpioIo()
 resource, second pin in that resource with the GPIO number of 31.
 
+It is possible to leave holes in the array of GPIOs. This is useful in
+cases like with SPI host controllers where some chip selects may be
+implemented as GPIOs and some as native signals. For example a SPI host
+controller can have chip selects 0 and 2 implemented as GPIOs and 1 as
+native:
+
+  Package () {
+      "cs-gpios",
+      Package () {
+          ^GPIO, 19, 0, 0, // chip select 0: GPIO
+          0,               // chip select 1: native signal
+          ^GPIO, 20, 0, 0, // chip select 2: GPIO
+      }
+  }
+
+Other supported properties
+--------------------------
+
+Following Device Tree compatible device properties are also supported by
+_DSD device properties for GPIO controllers:
+
+- gpio-hog
+- output-high
+- output-low
+- input
+- line-name
+
+Example:
+
+  Name (_DSD, Package () {
+      // _DSD Hierarchical Properties Extension UUID
+      ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
+      Package () {
+          Package () {"hog-gpio8", "G8PU"}
+      }
+  })
+
+  Name (G8PU, Package () {
+      ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+      Package () {
+          Package () {"gpio-hog", 1},
+          Package () {"gpios", Package () {8, 0}},
+          Package () {"output-high", 1},
+          Package () {"line-name", "gpio8-pullup"},
+      }
+  })
+
+- gpio-line-names
+
+Example:
+
+  Package () {
+      "gpio-line-names",
+      Package () {
+          "SPI0_CS_N", "EXP2_INT", "MUX6_IO", "UART0_RXD", "MUX7_IO",
+          "LVL_C_A1", "MUX0_IO", "SPI1_MISO"
+      }
+  }
+
+See Documentation/devicetree/bindings/gpio/gpio.txt for more information
+about these properties.
+
 ACPI GPIO Mappings Provided by Drivers
 --------------------------------------