Driver core patches for 3.9-rc1

Here is the big driver core merge for 3.9-rc1
 
 There are two major series here, both of which touch lots of drivers all
 over the kernel, and will cause you some merge conflicts:
   - add a new function called devm_ioremap_resource() to properly be
     able to check return values.
   - remove CONFIG_EXPERIMENTAL
 
 If you need me to provide a merged tree to handle these resolutions,
 please let me know.
 
 Other than those patches, there's not much here, some minor fixes and
 updates.
 
 Signed-off-by: Greg Kroah-Hartman <[email protected]>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlEmV0cACgkQMUfUDdst+yncCQCfbmnQZju7kzWXk6PjdFuKspT9
 weAAoMCzcAtEzzc4LXuUxxG/sXBVBCjW
 =yWAQ
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core patches from Greg Kroah-Hartman:
 "Here is the big driver core merge for 3.9-rc1

  There are two major series here, both of which touch lots of drivers
  all over the kernel, and will cause you some merge conflicts:

   - add a new function called devm_ioremap_resource() to properly be
     able to check return values.

   - remove CONFIG_EXPERIMENTAL

  Other than those patches, there's not much here, some minor fixes and
  updates"

Fix up trivial conflicts

* tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits)
  base: memory: fix soft/hard_offline_page permissions
  drivercore: Fix ordering between deferred_probe and exiting initcalls
  backlight: fix class_find_device() arguments
  TTY: mark tty_get_device call with the proper const values
  driver-core: constify data for class_find_device()
  firmware: Ignore abort check when no user-helper is used
  firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER
  firmware: Make user-mode helper optional
  firmware: Refactoring for splitting user-mode helper code
  Driver core: treat unregistered bus_types as having no devices
  watchdog: Convert to devm_ioremap_resource()
  thermal: Convert to devm_ioremap_resource()
  spi: Convert to devm_ioremap_resource()
  power: Convert to devm_ioremap_resource()
  mtd: Convert to devm_ioremap_resource()
  mmc: Convert to devm_ioremap_resource()
  mfd: Convert to devm_ioremap_resource()
  media: Convert to devm_ioremap_resource()
  iommu: Convert to devm_ioremap_resource()
  drm: Convert to devm_ioremap_resource()
  ...

drivers/spi/Kconfig

@@ -88,7 +88,7 @@ config SPI_BFIN_SPORT
 
 config SPI_AU1550
 	tristate "Au1550/Au1200/Au1300 SPI Controller"
-	depends on MIPS_ALCHEMY && EXPERIMENTAL
+	depends on MIPS_ALCHEMY
 	select SPI_BITBANG
 	help
 	  If you say yes to this option, support will be included for the
@@ -188,7 +188,7 @@ config SPI_IMX
 
 config SPI_LM70_LLP
 	tristate "Parallel port adapter for LM70 eval board (DEVELOPMENT)"
-	depends on PARPORT && EXPERIMENTAL
+	depends on PARPORT
 	select SPI_BITBANG
 	help
 	  This driver supports the NS LM70 LLP Evaluation Board,
@@ -204,7 +204,7 @@ config SPI_MPC52xx
 
 config SPI_MPC52xx_PSC
 	tristate "Freescale MPC52xx PSC SPI controller"
-	depends on PPC_MPC52xx && EXPERIMENTAL
+	depends on PPC_MPC52xx
 	help
 	  This enables using the Freescale MPC52xx Programmable Serial
 	  Controller in master SPI mode.
@@ -273,8 +273,8 @@ config SPI_OMAP_100K
 	  OMAP SPI 100K master controller for omap7xx boards.
 
 config SPI_ORION
-	tristate "Orion SPI master (EXPERIMENTAL)"
-	depends on PLAT_ORION && EXPERIMENTAL
+	tristate "Orion SPI master"
+	depends on PLAT_ORION
 	help
 	  This enables using the SPI master controller on the Orion chips.
 
@@ -328,7 +328,7 @@ config SPI_RSPI
 
 config SPI_S3C24XX
 	tristate "Samsung S3C24XX series SPI"
-	depends on ARCH_S3C24XX && EXPERIMENTAL
+	depends on ARCH_S3C24XX
 	select SPI_BITBANG
 	help
 	  SPI driver for Samsung S3C24XX series ARM SoCs
@@ -443,7 +443,7 @@ config SPI_XCOMM
 
 config SPI_XILINX
 	tristate "Xilinx SPI controller common module"
-	depends on HAS_IOMEM && EXPERIMENTAL
+	depends on HAS_IOMEM
 	select SPI_BITBANG
 	help
 	  This exposes the SPI controller IP from the Xilinx EDK.
@@ -455,7 +455,7 @@ config SPI_XILINX
 
 config SPI_NUC900
 	tristate "Nuvoton NUC900 series SPI"
-	depends on ARCH_W90X900 && EXPERIMENTAL
+	depends on ARCH_W90X900
 	select SPI_BITBANG
 	help
 	  SPI driver for Nuvoton NUC900 series ARM SoCs
@@ -489,7 +489,6 @@ comment "SPI Protocol Masters"
 
 config SPI_SPIDEV
 	tristate "User mode SPI device driver support"
-	depends on EXPERIMENTAL
 	help
 	  This supports user mode SPI protocol drivers.
 

drivers/spi/spi-ep93xx.c

@@ -1085,10 +1085,9 @@ static int ep93xx_spi_probe(struct platform_device *pdev)
 
 	espi->sspdr_phys = res->start + SSPDR;
 
-	espi->regs_base = devm_request_and_ioremap(&pdev->dev, res);
-	if (!espi->regs_base) {
-		dev_err(&pdev->dev, "failed to map resources\n");
-		error = -ENODEV;
+	espi->regs_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(espi->regs_base)) {
+		error = PTR_ERR(espi->regs_base);
 		goto fail_put_clock;
 	}
 

drivers/spi/spi-mxs.c

@@ -541,9 +541,9 @@ static int mxs_spi_probe(struct platform_device *pdev)
 	if (!iores || irq_err < 0 || irq_dma < 0)
 		return -EINVAL;
 
-	base = devm_request_and_ioremap(&pdev->dev, iores);
-	if (!base)
-		return -EADDRNOTAVAIL;
+	base = devm_ioremap_resource(&pdev->dev, iores);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
 
 	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
 	if (IS_ERR(pinctrl))

drivers/spi/spi-omap2-mcspi.c

@@ -1222,10 +1222,9 @@ static int omap2_mcspi_probe(struct platform_device *pdev)
 	r->end += regs_offset;
 	mcspi->phys = r->start;
 
-	mcspi->base = devm_request_and_ioremap(&pdev->dev, r);
-	if (!mcspi->base) {
-		dev_dbg(&pdev->dev, "can't ioremap MCSPI\n");
-		status = -ENOMEM;
+	mcspi->base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(mcspi->base)) {
+		status = PTR_ERR(mcspi->base);
 		goto free_master;
 	}
 

drivers/spi/spi-s3c64xx.c

@@ -1241,10 +1241,9 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
 	/* the spi->mode bits understood by this driver: */
 	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
 
-	sdd->regs = devm_request_and_ioremap(&pdev->dev, mem_res);
-	if (sdd->regs == NULL) {
-		dev_err(&pdev->dev, "Unable to remap IO\n");
-		ret = -ENXIO;
+	sdd->regs = devm_ioremap_resource(&pdev->dev, mem_res);
+	if (IS_ERR(sdd->regs)) {
+		ret = PTR_ERR(sdd->regs);
 		goto err0;
 	}
 

drivers/spi/spi-sirf.c

@@ -534,10 +534,9 @@ static int spi_sirfsoc_probe(struct platform_device *pdev)
 		}
 	}
 
-	sspi->base = devm_request_and_ioremap(&pdev->dev, mem_res);
-	if (!sspi->base) {
-		dev_err(&pdev->dev, "IO remap failed!\n");
-		ret = -ENOMEM;
+	sspi->base = devm_ioremap_resource(&pdev->dev, mem_res);
+	if (IS_ERR(sspi->base)) {
+		ret = PTR_ERR(sspi->base);
 		goto free_master;
 	}
 

drivers/spi/spi-tegra20-sflash.c

@@ -516,11 +516,9 @@ static int tegra_sflash_probe(struct platform_device *pdev)
 		ret = -ENODEV;
 		goto exit_free_master;
 	}
-	tsd->base = devm_request_and_ioremap(&pdev->dev, r);
-	if (!tsd->base) {
-		dev_err(&pdev->dev,
-			"Cannot request memregion/iomap dma address\n");
-		ret = -EADDRNOTAVAIL;
+	tsd->base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(tsd->base)) {
+		ret = PTR_ERR(tsd->base);
 		goto exit_free_master;
 	}
 

drivers/spi/spi-tegra20-slink.c

@@ -1169,11 +1169,9 @@ static int tegra_slink_probe(struct platform_device *pdev)
 		goto exit_free_master;
 	}
 	tspi->phys = r->start;
-	tspi->base = devm_request_and_ioremap(&pdev->dev, r);
-	if (!tspi->base) {
-		dev_err(&pdev->dev,
-			"Cannot request memregion/iomap dma address\n");
-		ret = -EADDRNOTAVAIL;
+	tspi->base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(tspi->base)) {
+		ret = PTR_ERR(tspi->base);
 		goto exit_free_master;
 	}
 

drivers/spi/spi.c

@@ -1251,10 +1251,10 @@ int spi_master_resume(struct spi_master *master)
 }
 EXPORT_SYMBOL_GPL(spi_master_resume);
 
-static int __spi_master_match(struct device *dev, void *data)
+static int __spi_master_match(struct device *dev, const void *data)
 {
 	struct spi_master *m;
-	u16 *bus_num = data;
+	const u16 *bus_num = data;
 
 	m = container_of(dev, struct spi_master, dev);
 	return m->bus_num == *bus_num;