Merge "ARM: dts: msm: Add CNSS Bus Bandwidth voting data"

This commit is contained in:
qctecmdr 2020-07-28 03:50:30 -07:00 • committed by Gerrit - the friendly Code Review server
commit 09d9e43fae
2 changed files with 21 additions and 1 deletions

View file

@ -70,7 +70,9 @@ Optional properties:
- qcom,cap-tsf-gpio: WLAN_TSF_CAPTURED GPIO signal specified by the chip
specifications, should be drived depending on products
- qcom,wlan-cbc-enabled: boolean property to control cold boot calibration
- interconnects: Interconnect framework setup for bus configuration
- qcom,bus-bw-cfg-num: Number of bus bandwidth voting cases
- qcom,bus-bw-cfg: Bus bandwidth voting data
Example:

View file

@ -5262,6 +5262,24 @@
wlan-ant-switch-supply = <&L7E>;
qcom,wlan-ant-switch-config = <2800000 2800000 0 0 0>;
interconnects = <&aggre2_noc MASTER_PCIE_0 &mc_virt SLAVE_EBI1>;
qcom,bus-bw-cfg-num = <7>;
qcom,bus-bw-cfg =
/* no vote */
<0 0>,
/* idle: 0-18 Mbps ddr freq: 451.2 MHz */
<2250 1600000>,
/* low: 18-60 Mbps ddr freq: 451.2 MHz */
<7500 1600000>,
/* medium: 60-240 Mbps ddr freq: 451.2 MHz */
<30000 1804800>,
/* high: 240 - 1080 Mbps ddr freq: 451.2 MHz */
<100000 1804800>,
/* high: 1080 - 1400 Mbps ddr freq: 451.2 MHz */
<175000 1804800>,
/* low (latency critical): 18 - 60 Mbps, ddr freq: 547.2 MHz */
<7500 2188800>;
mhi,max-channels = <30>;
mhi,timeout = <10000>;
mhi,buffer-len = <0x8000>;