From 0bac11efcdda1d6fe81d6de481b125183dafa07f Mon Sep 17 00:00:00 2001 From: Yulei Yao Date: Mon, 18 Nov 2019 16:03:51 +0800 Subject: [PATCH] ARM: dts: msm: Add camera dts nodes for Bengal QRD Add 3 rear cameras and 1 front camera nodes for Bengal QRD. CRs-Fixed: 2579384 Change-Id: I8a46d1da591ea09e004813e4c10997342f260c15 --- bengal-camera-sensor-qrd.dtsi | 403 ++++++++++++++++++++++++++++++++++ 1 file changed, 403 insertions(+) create mode 100644 bengal-camera-sensor-qrd.dtsi diff --git a/bengal-camera-sensor-qrd.dtsi b/bengal-camera-sensor-qrd.dtsi new file mode 100644 index 000000000000..a4c93476024f --- /dev/null +++ b/bengal-camera-sensor-qrd.dtsi @@ -0,0 +1,403 @@ +#include +&soc { + led_flash_rear: qcom,camera-flash@0 { + cell-index = <0>; + compatible = "qcom,camera-flash"; + flash-source = <&pmi632_flash0 &pmi632_flash1>; + torch-source = <&pmi632_torch0 &pmi632_torch1>; + switch-source = <&pmi632_switch0 &pmi632_switch0>; + status = "ok"; + }; + + led_flash_rear_aux: qcom,camera-flash@1 { + cell-index = <1>; + compatible = "qcom,camera-flash"; + flash-source = <&pmi632_flash0 &pmi632_flash1>; + torch-source = <&pmi632_torch0 &pmi632_torch1>; + switch-source = <&pmi632_switch0 &pmi632_switch0>; + status = "ok"; + }; + + led_flash_rear_aux2: qcom,camera-flash@2 { + cell-index = <2>; + compatible = "qcom,camera-flash"; + flash-source = <&pmi632_flash0 &pmi632_flash1>; + torch-source = <&pmi632_torch0 &pmi632_torch1>; + switch-source = <&pmi632_switch0 &pmi632_switch0>; + status = "ok"; + }; + + qcom,cam-res-mgr { + compatible = "qcom,cam-res-mgr"; + status = "ok"; + }; +}; + +&cam_cci0 { + actuator_rear: qcom,actuator0 { + cell-index = <0>; + compatible = "qcom,actuator"; + cci-master = <0>; + cam_vaf-supply = <&L5P>; + regulator-names = "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <2800000>; + rgltr-max-voltage = <2800000>; + rgltr-load-current = <100000>; + status = "ok"; + }; + + actuator_rear_aux: qcom,actuator1 { + cell-index = <1>; + compatible = "qcom,actuator"; + cci-master = <1>; + cam_vaf-supply = <&L5P>; + regulator-names = "cam_vaf"; + rgltr-cntrl-support; + rgltr-min-voltage = <2800000>; + rgltr-max-voltage = <2800000>; + rgltr-load-current = <100000>; + status = "ok"; + }; + + eeprom_rear: qcom,eeprom0 { + cell-index = <0>; + compatible = "qcom,eeprom"; + cam_vio-supply = <&L7P>; + cam_vana-supply = <&L4P>; + cam_vdig-supply = <&L2P>; + cam_vaf-supply = <&L5P>; + cam_clk-supply = <&gcc_camss_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_vaf"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1050000 0 2800000>; + rgltr-max-voltage = <1800000 2800000 1050000 0 2800000>; + rgltr-load-current = <120000 80000 1200000 0 100000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk0_active + &cam_sensor_rear0_reset_active>; + pinctrl-1 = <&cam_sensor_mclk0_suspend + &cam_sensor_rear0_reset_suspend>; + gpios = <&tlmm 20 0>, + <&tlmm 18 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK0", + "CAM_RESET0"; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&gcc GCC_CAMSS_MCLK0_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <19200000>; + }; + + eeprom_rear_aux: qcom,eeprom1 { + cell-index = <1>; + compatible = "qcom,eeprom"; + cam_vio-supply = <&L7P>; + cam_vana-supply = <&L3P>; + cam_vdig-supply = <&L1P>; + cam_vaf-supply = <&L5P>; + cam_clk-supply = <&gcc_camss_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_vaf"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1200000 0 2800000>; + rgltr-max-voltage = <1800000 2800000 1200000 0 2800000>; + rgltr-load-current = <120000 80000 1200000 0 100000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk1_active + &cam_sensor_rear1_reset_active>; + pinctrl-1 = <&cam_sensor_mclk1_suspend + &cam_sensor_rear1_reset_suspend>; + gpios = <&tlmm 21 0>, + <&tlmm 19 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK1", + "CAM_RESET1"; + sensor-mode = <0>; + cci-master = <1>; + status = "ok"; + clocks = <&gcc GCC_CAMSS_MCLK1_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <19200000>; + }; + + eeprom_front: qcom,eeprom2 { + cell-index = <2>; + compatible = "qcom,eeprom"; + cam_vio-supply = <&L7P>; + cam_vana-supply = <&L6P>; + cam_vdig-supply = <&L2P>; + cam_clk-supply = <&gcc_camss_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1056000 0>; + rgltr-max-voltage = <1800000 2800000 1056000 0>; + rgltr-load-current = <0 80000 105000 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk2_active + &cam_sensor_front0_reset_active>; + pinctrl-1 = <&cam_sensor_mclk2_suspend + &cam_sensor_front0_reset_suspend>; + gpios = <&tlmm 27 0>, + <&tlmm 24 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK2", + "CAM_RESET2"; + sensor-mode = <0>; + cci-master = <1>; + status = "ok"; + clocks = <&gcc GCC_CAMSS_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + eeprom_rear_aux2: qcom,eeprom3 { + cell-index = <3>; + compatible = "qcom,eeprom"; + cam_vio-supply = <&L7P>; + cam_vana-supply = <&L6P>; + cam_vdig-supply = <&L1P>; + cam_clk-supply = <&gcc_camss_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1200000 0>; + rgltr-max-voltage = <1800000 2800000 1200000 0>; + rgltr-load-current = <120000 80000 1200000 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk3_active + &cam_sensor_rear2_reset_active>; + pinctrl-1 = <&cam_sensor_mclk3_suspend + &cam_sensor_rear2_reset_suspend>; + gpios = <&tlmm 28 0>, + <&tlmm 65 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK3", + "CAM_RESET3"; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&gcc GCC_CAMSS_MCLK3_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <19200000>; + }; + + /* Rear*/ + qcom,cam-sensor0 { + cell-index = <0>; + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <0>; + sensor-position-roll = <270>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + actuator-src = <&actuator_rear>; + led-flash-src = <&led_flash_rear>; + eeprom-src = <&eeprom_rear>; + cam_vio-supply = <&L7P>; + cam_vana-supply = <&L4P>; + cam_vdig-supply = <&L2P>; + cam_vaf-supply = <&L5P>; + cam_clk-supply = <&gcc_camss_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_vaf"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1050000 0 2800000>; + rgltr-max-voltage = <1800000 2800000 1050000 0 2800000>; + rgltr-load-current = <120000 80000 1200000 0 100000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk0_active + &cam_sensor_rear0_reset_active>; + pinctrl-1 = <&cam_sensor_mclk0_suspend + &cam_sensor_rear0_reset_suspend>; + gpios = <&tlmm 20 0>, + <&tlmm 18 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK0", + "CAM_RESET0"; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&gcc GCC_CAMSS_MCLK0_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <19200000>; + }; + + /*Rear Aux*/ + qcom,cam-sensor1 { + cell-index = <1>; + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <1>; + sensor-position-roll = <270>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + actuator-src = <&actuator_rear_aux>; + led-flash-src = <&led_flash_rear_aux>; + eeprom-src = <&eeprom_rear_aux>; + cam_vio-supply = <&L7P>; + cam_vana-supply = <&L3P>; + cam_vdig-supply = <&L1P>; + cam_vaf-supply = <&L5P>; + cam_clk-supply = <&gcc_camss_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk", "cam_vaf"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1200000 0 2800000>; + rgltr-max-voltage = <1800000 2800000 1200000 0 2800000>; + rgltr-load-current = <120000 80000 1200000 0 100000>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk1_active + &cam_sensor_rear1_reset_active>; + pinctrl-1 = <&cam_sensor_mclk1_suspend + &cam_sensor_rear1_reset_suspend>; + gpios = <&tlmm 21 0>, + <&tlmm 19 0>; + gpio-reset = <1>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK1", + "CAM_RESET1"; + sensor-mode = <0>; + cci-master = <1>; + status = "ok"; + clocks = <&gcc GCC_CAMSS_MCLK1_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <19200000>; + }; + + /*Front*/ + qcom,cam-sensor2 { + cell-index = <2>; + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <2>; + sensor-position-roll = <90>; + sensor-position-pitch = <0>; + sensor-position-yaw = <0>; + eeprom-src = <&eeprom_front>; + cam_vio-supply = <&L7P>; + cam_vana-supply = <&L6P>; + cam_vdig-supply = <&L2P>; + cam_clk-supply = <&gcc_camss_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1056000 0>; + rgltr-max-voltage = <1800000 2800000 1056000 0>; + rgltr-load-current = <0 80000 105000 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk2_active + &cam_sensor_front0_reset_active + &cam_sensor_csi_mux_oe_active + &cam_sensor_csi_mux_sel_active>; + pinctrl-1 = <&cam_sensor_mclk2_suspend + &cam_sensor_front0_reset_suspend + &cam_sensor_csi_mux_oe_suspend + &cam_sensor_csi_mux_sel_suspend>; + gpios = <&tlmm 27 0>, + <&tlmm 24 0>, + <&tlmm 66 0>, + <&tlmm 67 0>; + gpio-reset = <1>; + gpio-custom1 = <2>; + gpio-custom2 = <3>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK2", + "CAM_RESET2", + "CAM_CSIMUX_OE0", + "CAM_CSIMUX_SEL0"; + sensor-mode = <0>; + cci-master = <1>; + status = "ok"; + clocks = <&gcc GCC_CAMSS_MCLK2_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <24000000>; + }; + + /*Rear Aux2*/ + qcom,cam-sensor3 { + cell-index = <3>; + compatible = "qcom,cam-sensor"; + csiphy-sd-index = <2>; + sensor-position-roll = <270>; + sensor-position-pitch = <0>; + sensor-position-yaw = <180>; + led-flash-src = <&led_flash_rear_aux2>; + eeprom-src = <&eeprom_rear_aux2>; + cam_vio-supply = <&L7P>; + cam_vana-supply = <&L6P>; + cam_vdig-supply = <&L1P>; + cam_clk-supply = <&gcc_camss_top_gdsc>; + regulator-names = "cam_vio", "cam_vana", "cam_vdig", + "cam_clk"; + rgltr-cntrl-support; + pwm-switch; + rgltr-min-voltage = <1800000 2800000 1200000 0>; + rgltr-max-voltage = <1800000 2800000 1200000 0>; + rgltr-load-current = <120000 80000 1200000 0>; + gpio-no-mux = <0>; + pinctrl-names = "cam_default", "cam_suspend"; + pinctrl-0 = <&cam_sensor_mclk3_active + &cam_sensor_rear2_reset_active + &cam_sensor_csi_mux_oe_active + &cam_sensor_csi_mux_sel_active>; + pinctrl-1 = <&cam_sensor_mclk3_suspend + &cam_sensor_rear2_reset_suspend + &cam_sensor_csi_mux_oe_suspend + &cam_sensor_csi_mux_sel_suspend>; + gpios = <&tlmm 28 0>, + <&tlmm 65 0>, + <&tlmm 66 0>, + <&tlmm 67 0>; + gpio-reset = <1>; + gpio-custom1 = <2>; + gpio-custom2 = <3>; + gpio-req-tbl-num = <0 1>; + gpio-req-tbl-flags = <1 0>; + gpio-req-tbl-label = "CAMIF_MCLK3", + "CAM_RESET3", + "CAM_CSIMUX_OE1", + "CAM_CSIMUX_SEL1"; + sensor-mode = <0>; + cci-master = <0>; + status = "ok"; + clocks = <&gcc GCC_CAMSS_MCLK3_CLK>; + clock-names = "cam_clk"; + clock-cntl-level = "turbo"; + clock-rates = <19200000>; + }; +};