diff --git a/qcom/denver-display.dtsi b/qcom/denver-display.dtsi
index 9cfeb1d542a2..c2e3dcd593ca 100644
--- a/qcom/denver-display.dtsi
+++ b/qcom/denver-display.dtsi
@@ -2,6 +2,7 @@
 #include "dsi-panel-mot-auo-nt36675-fhd-video.dtsi"
 #include "dsi-panel-mot-boe-nt36675-fhd-video.dtsi"
 #include "dsi-panel-mot-dummy-qhd-video.dtsi"
+#include "dsi-panel-mot-bod-nt36675-fhd-video.dtsi"
 
 
 
@@ -207,6 +208,47 @@
 	};
 };
 
+&dsi_nt36675_bod_video {
+	qcom,platform-te-gpio = <&tlmm 23 0>;
+	qcom,platform-reset-gpio = <&pm6150l_gpios 9 0>;
+
+	qcom,panel-supply-entries = <&dsi_panel_pwr_supply_denver_boe>;
+
+	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
+
+	qcom,mdss-dsi-bl-min-level = <32>;
+	qcom,mdss-dsi-bl-max-level = <4095>;
+	qcom,mdss-dsi-bl-default-level = <2047>;
+	qcom,mdss-brightness-max-level = <4095>;
+
+	qcom,esd-check-enabled;
+	qcom,mdss-dsi-panel-status-check-mode = "reg_read";
+	qcom,mdss-dsi-panel-status-command = [06 01 00 01 00 00 01 0a];
+	qcom,mdss-dsi-panel-status-command-state = "dsi_hs_mode";
+	qcom,mdss-dsi-panel-status-value = <0x9c>;
+	qcom,mdss-dsi-panel-status-read-length = <1>;
+
+	qcom,tp_state_check_enable;
+
+	qcom,mdss-dsi-hbm-on-command = [39 01 00 00 00 00 03 51 0F FF];
+	qcom,mdss-dsi-hbm-on-command-state = "dsi_lp_mode";
+	qcom,mdss-dsi-hbm-off-command = [39 01 00 00 00 00 03 51 0B 13];
+	qcom,mdss-dsi-hbm-off-command-state = "dsi_lp_mode";
+	qcom,mdss-dsi-hbm-type = "lcd-dcs-wled";
+
+	qcom,dsi-select-clocks = "mux_byte_clk0", "mux_pixel_clk0";
+	qcom,mdss-dsi-t-clk-post = <0x0F>;
+	qcom,mdss-dsi-t-clk-pre = <0x3B>;
+	qcom,mdss-dsi-display-timings {
+		timing@0 {
+			qcom,mdss-dsi-panel-phy-timings = [00 24 0A 0A 26 25 09
+				0A 09 02 04 00];
+			qcom,display-topology = <1 0 1>;
+			qcom,default-topology-index = <0>;
+		};
+	};
+};
+
 &mot_dummy_vid_qhd {
 	qcom,platform-te-gpio = <&tlmm 23 0>;
 	qcom,platform-reset-gpio = <&pm6150l_gpios 9 0>;