The bulk of the changes are updates and fixes to existing clk provider

drivers, along with a pretty standard number of new drivers. The core
 recieved a small number of updates as well.
 
 Core changes of note:
 * Removed CLK_IS_ROOT flag
 
 New clk provider drivers:
 * Renesas r8a7796 Clock Pulse Generator / Module Standby and Software
   Reset
 * Allwinner sun8i H3 Clock Controller Unit
 * AmLogic meson8b clock controller (rewritten)
 * AmLogic gxbb clock controller
 * Support for some new ICs was added by simple changes to static data
   tables for chips sharing the same family
 
 Driver updates of note:
 * the Allwinner sunxi clock driver infrastucture was rewritten to
   comform to the state of the art at drivers/clk/sunxi-ng. The old
   implementation is still supported for backwards compatibility with the
   DT ABI
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJXm9LNAAoJEKI6nJvDJaTUHYcP/1oKTHA4uSPux2+5l9vApEJc
 eSV0oSEP/zDDwYfV4xRt1byAOtzHe3R4p5zDGShnk3+CCwXbQSLGmFJFmZDoSs5E
 ulftXA8uRV4ac0SEh86BOlstdJHGOVo7Q38XtdPvgKRTv58+ZqHuFcvB726bWY/I
 GMzVTkpugbn5U7e3MLM58gkBoqa8BS9uIdsf5q/JIxdpe+VgUtjmioH9Rz6G5U5Y
 T6ObeU6HNusDaz6kUJIiAEkl4UNHk+aebnY7FTbwd9JGGySp5nEknVY7tSMeC6iU
 hG/knzdMiasa5yv0xdW3/OxnKCQtEeuPPHnJDSXWc9yb20vNs2QhRtd8uckMGHOH
 X7fXq9xoLxDH81AggW188g7+xfhx7J+ASpjHmHs74itUIoqhhy61PM3I95yQ8m6s
 QDkInqSszFd2C7OiYsy6m5XS0K8g0jyA2tzWhxlIZNVAl7yP71+HVLJ45NNKCPkb
 oYbMx4ho538Tl6+c6HHJG0vC3XWSdHbvwMOKyE9k/GyrIJ7FxLZS3BLOYPm6u9t4
 9n041MbtBb/UrWVi8kMSdmBjIIs6VSGjq5gwRFAqoPQt3VkPuy0IfnwIpjdE1aFz
 PbDJQF4ze7D3JgH2rWtivXbCTRthTANmoar299xjSwwb99TSlP2IABY3cNnJrhPr
 9/PGShM3hqRpBEUnEmt+
 =1dpY
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Michael Turquette:
 "The bulk of the changes are updates and fixes to existing clk provider
  drivers, along with a pretty standard number of new drivers.  The core
  recieved a small number of updates as well.

  Core changes of note:
   - removed CLK_IS_ROOT flag

  New clk provider drivers:
   - Renesas r8a7796 clock pulse generator / module standby and
     software reset
   - Allwinner sun8i H3 clock controller unit
   - AmLogic meson8b clock controller (rewritten)
   - AmLogic gxbb clock controller
   - support for some new ICs was added by simple changes to static
     data tables for chips sharing the same family

  Driver updates of note:
   - the Allwinner sunxi clock driver infrastucture was rewritten to
     comform to the state of the art at drivers/clk/sunxi-ng.  The old
     implementation is still supported for backwards compatibility with
     the DT ABI"

* tag 'clk-for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (162 commits)
  clk: Makefile: re-sort and clean up
  Revert "clk: gxbb: expose CLKID_MMC_PCLK"
  clk: samsung: Allow modular build of the Audio Subsystem CLKCON driver
  clk: samsung: make clk-s5pv210-audss explicitly non-modular
  clk: exynos5433: remove CLK_IGNORE_UNUSED flag from SPI clocks
  clk: oxnas: Add hardware dependencies
  clk: imx7d: do not set parent of ethernet time/ref clocks
  ARM: dt: sun8i: switch the H3 to the new CCU driver
  clk: sunxi-ng: h3: Fix Kconfig symbol typo
  clk: sunxi-ng: h3: Fix audio clock divider offset
  clk: sunxi-ng: Add H3 clocks
  clk: sunxi-ng: Add N-K-M-P factor clock
  clk: sunxi-ng: Add N-K-M Factor clock
  clk: sunxi-ng: Add N-M-factor clock support
  clk: sunxi-ng: Add N-K-factor clock support
  clk: sunxi-ng: Add M-P factor clock support
  clk: sunxi-ng: Add divider
  clk: sunxi-ng: Add phase clock support
  clk: sunxi-ng: Add mux clock support
  clk: sunxi-ng: Add gate clock support
  ...

Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt

@@ -0,0 +1,36 @@
+* Amlogic GXBB Clock and Reset Unit
+
+The Amlogic GXBB clock controller generates and supplies clock to various
+controllers within the SoC.
+
+Required Properties:
+
+- compatible: should be "amlogic,gxbb-clkc"
+- reg: physical base address of the clock controller and length of memory
+       mapped region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/gxbb-clkc.h header and can be
+used in device tree sources.
+
+Example: Clock controller node:
+
+	clkc: clock-controller@c883c000 {
+		#clock-cells = <1>;
+		compatible = "amlogic,gxbb-clkc";
+		reg = <0x0 0xc883c000 0x0 0x3db>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller:
+
+	uart_AO: serial@c81004c0 {
+		compatible = "amlogic,meson-uart";
+		reg = <0xc81004c0 0x14>;
+		interrupts = <0 90 1>;
+		clocks = <&clkc CLKID_CLK81>;
+		status = "disabled";
+	};

Documentation/devicetree/bindings/clock/fixed-factor-clock.txt

@@ -14,6 +14,10 @@ Required properties:
 Optional properties:
 - clock-output-names : From common clock binding.
 
+Some clocks that require special treatments are also handled by that
+driver, with the compatibles:
+  - allwinner,sun4i-a10-pll3-2x-clk
+
 Example:
 	clock {
 		compatible = "fixed-factor-clock";

Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt

@@ -13,7 +13,8 @@ They provide the following functionalities:
 
 Required Properties:
   - compatible: Must be one of:
-      - "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC
+      - "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC (R-Car H3)
+      - "renesas,r8a7796-cpg-mssr" for the r8a7796 SoC (R-Car M3-W)
 
   - reg: Base address and length of the memory resource used by the CPG/MSSR
     block
@@ -21,8 +22,8 @@ Required Properties:
   - clocks: References to external parent clocks, one entry for each entry in
     clock-names
   - clock-names: List of external parent clock names. Valid names are:
-      - "extal" (r8a7795)
-      - "extalr" (r8a7795)
+      - "extal" (r8a7795, r8a7796)
+      - "extalr" (r8a7795, r8a7796)
 
   - #clock-cells: Must be 2
       - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"

Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt

@@ -17,6 +17,7 @@ Required Properties:
     - "renesas,r8a7779-mstp-clocks" for R8A7779 (R-Car H1) MSTP gate clocks
     - "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks
     - "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2-W) MSTP gate clocks
+    - "renesas,r8a7792-mstp-clocks" for R8A7792 (R-Car V2H) MSTP gate clocks
     - "renesas,r8a7793-mstp-clocks" for R8A7793 (R-Car M2-N) MSTP gate clocks
     - "renesas,r8a7794-mstp-clocks" for R8A7794 (R-Car E2) MSTP gate clocks
     - "renesas,sh73a0-mstp-clocks" for SH73A0 (SH-MobileAG5) MSTP gate clocks

Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt

@@ -10,6 +10,7 @@ Required Properties:
   - compatible: Must be one of
     - "renesas,r8a7790-cpg-clocks" for the r8a7790 CPG
     - "renesas,r8a7791-cpg-clocks" for the r8a7791 CPG
+    - "renesas,r8a7792-cpg-clocks" for the r8a7792 CPG
     - "renesas,r8a7793-cpg-clocks" for the r8a7793 CPG
     - "renesas,r8a7794-cpg-clocks" for the r8a7794 CPG
     and "renesas,rcar-gen2-cpg-clocks" as a fallback.

Documentation/devicetree/bindings/clock/sunxi-ccu.txt

@@ -0,0 +1,24 @@
+Allwinner Clock Control Unit Binding
+------------------------------------
+
+Required properties :
+- compatible: must contain one of the following compatible:
+		- "allwinner,sun8i-h3-ccu"
+
+- reg: Must contain the registers base address and length
+- clocks: phandle to the oscillators feeding the CCU. Two are needed:
+  - "hosc": the high frequency oscillator (usually at 24MHz)
+  - "losc": the low frequency oscillator (usually at 32kHz)
+- clock-names: Must contain the clock names described just above
+- #clock-cells : must contain 1
+- #reset-cells : must contain 1
+
+Example:
+ccu: clock@01c20000 {
+	compatible = "allwinner,sun8i-h3-ccu";
+	reg = <0x01c20000 0x400>;
+	clocks = <&osc24M>, <&osc32k>;
+	clock-names = "hosc", "losc";
+	#clock-cells = <1>;
+	#reset-cells = <1>;
+};