Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1750 commits) ixgbe: Allow Priority Flow Control settings to survive a device reset net: core: remove unneeded include in net/core/utils.c. e1000e: update version number e1000e: fix close interrupt race e1000e: fix loss of multicast packets e1000e: commonize tx cleanup routine to match e1000 & igb netfilter: fix nf_logger name in ebt_ulog. netfilter: fix warning in ebt_ulog init function. netfilter: fix warning about invalid const usage e1000: fix close race with interrupt e1000: cleanup clean_tx_irq routine so that it completely cleans ring e1000: fix tx hang detect logic and address dma mapping issues bridge: bad error handling when adding invalid ether address bonding: select current active slave when enslaving device for mode tlb and alb gianfar: reallocate skb when headroom is not enough for fcb Bump release date to 25Mar2009 and version to 0.22 r6040: Fix second PHY address qeth: fix wait_event_timeout handling qeth: check for completion of a running recovery qeth: unregister MAC addresses during recovery. ... Manually fixed up conflicts in: drivers/infiniband/hw/cxgb3/cxio_hal.h drivers/infiniband/hw/nes/nes_nic.c
2026-10-24 21:54:34 -04:00 · 2009-03-26 15:54:36 -07:00 · 2009-03-26 15:54:36 -07:00 · 13220a94d3
commit 13220a94d3
parent 8690d8a9f6 08abe18af1
1185 changed files with 130659 additions and 90407 deletions
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@ -115,6 +115,7 @@ header-y += mqueue.h
 header-y += mtio.h
 header-y += ncp_no.h
 header-y += neighbour.h
+header-y += net_dropmon.h
 header-y += netfilter_arp.h
 header-y += netrom.h
 header-y += nfs2.h
--- a/include/linux/arcdevice.h
+++ b/include/linux/arcdevice.h
@ -235,8 +235,6 @@ struct Outgoing {


 struct arcnet_local {
-	struct net_device_stats stats;
-
 	uint8_t config,		/* current value of CONFIG register */
 		timeout,	/* Extended timeout for COM20020 */
 		backplane,	/* Backplane flag for COM20020 */
@ -335,7 +333,12 @@ void arcnet_dump_skb(struct net_device *dev, struct sk_buff *skb, char *desc);

 void arcnet_unregister_proto(struct ArcProto *proto);
 irqreturn_t arcnet_interrupt(int irq, void *dev_id);
-struct net_device *alloc_arcdev(char *name);
+struct net_device *alloc_arcdev(const char *name);
+
+int arcnet_open(struct net_device *dev);
+int arcnet_close(struct net_device *dev);
+int arcnet_send_packet(struct sk_buff *skb, struct net_device *dev);
+void arcnet_timeout(struct net_device *dev);

 #endif				/* __KERNEL__ */
 #endif				/* _LINUX_ARCDEVICE_H */
--- a/include/linux/ath9k_platform.h
+++ b/include/linux/ath9k_platform.h
@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2009 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _LINUX_ATH9K_PLATFORM_H
+#define _LINUX_ATH9K_PLATFORM_H
+
+#define ATH9K_PLAT_EEP_MAX_WORDS	2048
+
+struct ath9k_platform_data {
+	u16 eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS];
+};
+
+#endif /* _LINUX_ATH9K_PLATFORM_H */
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@ -21,9 +21,110 @@
 typedef u64 cycle_t;
 struct clocksource;

+/**
+ * struct cyclecounter - hardware abstraction for a free running counter
+ *	Provides completely state-free accessors to the underlying hardware.
+ *	Depending on which hardware it reads, the cycle counter may wrap
+ *	around quickly. Locking rules (if necessary) have to be defined
+ *	by the implementor and user of specific instances of this API.
+ *
+ * @read:		returns the current cycle value
+ * @mask:		bitmask for two's complement
+ *			subtraction of non 64 bit counters,
+ *			see CLOCKSOURCE_MASK() helper macro
+ * @mult:		cycle to nanosecond multiplier
+ * @shift:		cycle to nanosecond divisor (power of two)
+ */
+struct cyclecounter {
+	cycle_t (*read)(const struct cyclecounter *cc);
+	cycle_t mask;
+	u32 mult;
+	u32 shift;
+};
+
+/**
+ * struct timecounter - layer above a %struct cyclecounter which counts nanoseconds
+ *	Contains the state needed by timecounter_read() to detect
+ *	cycle counter wrap around. Initialize with
+ *	timecounter_init(). Also used to convert cycle counts into the
+ *	corresponding nanosecond counts with timecounter_cyc2time(). Users
+ *	of this code are responsible for initializing the underlying
+ *	cycle counter hardware, locking issues and reading the time
+ *	more often than the cycle counter wraps around. The nanosecond
+ *	counter will only wrap around after ~585 years.
+ *
+ * @cc:			the cycle counter used by this instance
+ * @cycle_last:		most recent cycle counter value seen by
+ *			timecounter_read()
+ * @nsec:		continuously increasing count
+ */
+struct timecounter {
+	const struct cyclecounter *cc;
+	cycle_t cycle_last;
+	u64 nsec;
+};
+
+/**
+ * cyclecounter_cyc2ns - converts cycle counter cycles to nanoseconds
+ * @tc:		Pointer to cycle counter.
+ * @cycles:	Cycles
+ *
+ * XXX - This could use some mult_lxl_ll() asm optimization. Same code
+ * as in cyc2ns, but with unsigned result.
+ */
+static inline u64 cyclecounter_cyc2ns(const struct cyclecounter *cc,
+				      cycle_t cycles)
+{
+	u64 ret = (u64)cycles;
+	ret = (ret * cc->mult) >> cc->shift;
+	return ret;
+}
+
+/**
+ * timecounter_init - initialize a time counter
+ * @tc:			Pointer to time counter which is to be initialized/reset
+ * @cc:			A cycle counter, ready to be used.
+ * @start_tstamp:	Arbitrary initial time stamp.
+ *
+ * After this call the current cycle register (roughly) corresponds to
+ * the initial time stamp. Every call to timecounter_read() increments
+ * the time stamp counter by the number of elapsed nanoseconds.
+ */
+extern void timecounter_init(struct timecounter *tc,
+			     const struct cyclecounter *cc,
+			     u64 start_tstamp);
+
+/**
+ * timecounter_read - return nanoseconds elapsed since timecounter_init()
+ *                    plus the initial time stamp
+ * @tc:          Pointer to time counter.
+ *
+ * In other words, keeps track of time since the same epoch as
+ * the function which generated the initial time stamp.
+ */
+extern u64 timecounter_read(struct timecounter *tc);
+
+/**
+ * timecounter_cyc2time - convert a cycle counter to same
+ *                        time base as values returned by
+ *                        timecounter_read()
+ * @tc:		Pointer to time counter.
+ * @cycle:	a value returned by tc->cc->read()
+ *
+ * Cycle counts that are converted correctly as long as they
+ * fall into the interval [-1/2 max cycle count, +1/2 max cycle count],
+ * with "max cycle count" == cs->mask+1.
+ *
+ * This allows conversion of cycle counter values which were generated
+ * in the past.
+ */
+extern u64 timecounter_cyc2time(struct timecounter *tc,
+				cycle_t cycle_tstamp);
+
 /**
 * struct clocksource - hardware abstraction for a free running counter
 *	Provides mostly state-free accessors to the underlying hardware.
+ *	This is the structure used for system time.
 *
 * @name:		ptr to clocksource name
 * @list:		list head for registration
--- a/include/linux/com20020.h
+++ b/include/linux/com20020.h
@ -29,6 +29,7 @@

 int com20020_check(struct net_device *dev);
 int com20020_found(struct net_device *dev, int shared);
+extern const struct net_device_ops com20020_netdev_ops;

 /* The number of low I/O ports used by the card. */
 #define ARCNET_TOTAL_SIZE 8
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@ -109,6 +109,12 @@ struct cn_queue_dev {
 	unsigned char name[CN_CBQ_NAMELEN];

 	struct workqueue_struct *cn_queue;
+	/* Sent to kevent to create cn_queue only when needed */
+	struct work_struct wq_creation;
+	/* Tell if the wq_creation job is pending/completed */
+	atomic_t wq_requested;
+	/* Wait for cn_queue to be created */
+	wait_queue_head_t wq_created;

 	struct list_head queue_list;
 	spinlock_t queue_lock;
@ -164,6 +170,8 @@ int cn_netlink_send(struct cn_msg *, u32, gfp_t);
 int cn_queue_add_callback(struct cn_queue_dev *dev, char *name, struct cb_id *id, void (*callback)(void *));
 void cn_queue_del_callback(struct cn_queue_dev *dev, struct cb_id *id);

+int queue_cn_work(struct cn_callback_entry *cbq, struct work_struct *work);
+
 struct cn_queue_dev *cn_queue_alloc_dev(char *name, struct sock *);
 void cn_queue_free_dev(struct cn_queue_dev *dev);

--- a/include/linux/dccp.h
+++ b/include/linux/dccp.h
@ -355,46 +355,6 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb)
 	return __dccp_hdr_len(dccp_hdr(skb));
 }

-
-/* initial values for each feature */
-#define DCCPF_INITIAL_SEQUENCE_WINDOW		100
-#define DCCPF_INITIAL_ACK_RATIO			2
-#define DCCPF_INITIAL_CCID			DCCPC_CCID2
-/* FIXME: for now we're default to 1 but it should really be 0 */
-#define DCCPF_INITIAL_SEND_NDP_COUNT		1
-
-/**
-  * struct dccp_minisock - Minimal DCCP connection representation
-  *
-  * Will be used to pass the state from dccp_request_sock to dccp_sock.
-  *
-  * @dccpms_sequence_window - Sequence Window Feature (section 7.5.2)
-  * @dccpms_pending - List of features being negotiated
-  * @dccpms_conf -
-  */
-struct dccp_minisock {
-	__u64			dccpms_sequence_window;
-	struct list_head	dccpms_pending;
-	struct list_head	dccpms_conf;
-};
-
-struct dccp_opt_conf {
-	__u8			*dccpoc_val;
-	__u8			dccpoc_len;
-};
-
-struct dccp_opt_pend {
-	struct list_head	dccpop_node;
-	__u8			dccpop_type;
-	__u8			dccpop_feat;
-	__u8		        *dccpop_val;
-	__u8			dccpop_len;
-	int			dccpop_conf;
-	struct dccp_opt_conf    *dccpop_sc;
-};
-
-extern void dccp_minisock_init(struct dccp_minisock *dmsk);
-
 /**
 * struct dccp_request_sock  -  represent DCCP-specific connection request
 * @dreq_inet_rsk: structure inherited from
@ -483,13 +443,14 @@ struct dccp_ackvec;
 * @dccps_timestamp_time - time of receiving latest @dccps_timestamp_echo
 * @dccps_l_ack_ratio - feature-local Ack Ratio
 * @dccps_r_ack_ratio - feature-remote Ack Ratio
+ * @dccps_l_seq_win - local Sequence Window (influences ack number validity)
+ * @dccps_r_seq_win - remote Sequence Window (influences seq number validity)
 * @dccps_pcslen - sender   partial checksum coverage (via sockopt)
 * @dccps_pcrlen - receiver partial checksum coverage (via sockopt)
 * @dccps_send_ndp_count - local Send NDP Count feature (7.7.2)
 * @dccps_ndp_count - number of Non Data Packets since last data packet
 * @dccps_mss_cache - current value of MSS (path MTU minus header sizes)
 * @dccps_rate_last - timestamp for rate-limiting DCCP-Sync (RFC 4340, 7.5.4)
- * @dccps_minisock - associated minisock (accessed via dccp_msk)
 * @dccps_featneg - tracks feature-negotiation state (mostly during handshake)
 * @dccps_hc_rx_ackvec - rx half connection ack vector
 * @dccps_hc_rx_ccid - CCID used for the receiver (or receiving half-connection)
@ -523,12 +484,13 @@ struct dccp_sock {
 	__u32				dccps_timestamp_time;
 	__u16				dccps_l_ack_ratio;
 	__u16				dccps_r_ack_ratio;
+	__u64				dccps_l_seq_win:48;
+	__u64				dccps_r_seq_win:48;
 	__u8				dccps_pcslen:4;
 	__u8				dccps_pcrlen:4;
 	__u8				dccps_send_ndp_count:1;
 	__u64				dccps_ndp_count:48;
 	unsigned long			dccps_rate_last;
-	struct dccp_minisock		dccps_minisock;
 	struct list_head		dccps_featneg;
 	struct dccp_ackvec		*dccps_hc_rx_ackvec;
 	struct ccid			*dccps_hc_rx_ccid;
@ -546,11 +508,6 @@ static inline struct dccp_sock *dccp_sk(const struct sock *sk)
 	return (struct dccp_sock *)sk;
 }

-static inline struct dccp_minisock *dccp_msk(const struct sock *sk)
-{
-	return (struct dccp_minisock *)&dccp_sk(sk)->dccps_minisock;
-}
-
 static inline const char *dccp_role(const struct sock *sk)
 {
 	switch (dccp_sk(sk)->dccps_role) {
--- a/include/linux/errqueue.h
+++ b/include/linux/errqueue.h
@ -18,6 +18,7 @@ struct sock_extended_err
 #define SO_EE_ORIGIN_LOCAL	1
 #define SO_EE_ORIGIN_ICMP	2
 #define SO_EE_ORIGIN_ICMP6	3
+#define SO_EE_ORIGIN_TIMESTAMPING 4

 #define SO_EE_OFFENDER(ee)	((struct sockaddr*)((ee)+1))

--- a/include/linux/etherdevice.h
+++ b/include/linux/etherdevice.h
@ -184,4 +184,25 @@ static inline unsigned compare_ether_addr_64bits(const u8 addr1[6+2],
 }
 #endif	/* __KERNEL__ */

+/**
+ * compare_ether_header - Compare two Ethernet headers
+ * @a: Pointer to Ethernet header
+ * @b: Pointer to Ethernet header
+ *
+ * Compare two ethernet headers, returns 0 if equal.
+ * This assumes that the network header (i.e., IP header) is 4-byte
+ * aligned OR the platform can handle unaligned access.  This is the
+ * case for all packets coming into netif_receive_skb or similar
+ * entry points.
+ */
+
+static inline int compare_ether_header(const void *a, const void *b)
+{
+	u32 *a32 = (u32 *)((u8 *)a + 2);
+	u32 *b32 = (u32 *)((u8 *)b + 2);
+
+	return (*(u16 *)a ^ *(u16 *)b) | (a32[0] ^ b32[0]) |
+	       (a32[1] ^ b32[1]) | (a32[2] ^ b32[2]);
+}
+
 #endif	/* _LINUX_ETHERDEVICE_H */
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@ -7,6 +7,7 @@
 * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
 *                                christopher.leech@intel.com,
 *                                scott.feldman@intel.com)
+ * Portions Copyright (C) Sun Microsystems 2008
 */

 #ifndef _LINUX_ETHTOOL_H
@ -287,10 +288,75 @@ enum ethtool_flags {
 	ETH_FLAG_LRO		= (1 << 15),	/* LRO is enabled */
 };

-struct ethtool_rxnfc {
-	__u32		cmd;
+/* The following structures are for supporting RX network flow
+ * classification configuration. Note, all multibyte fields, e.g.,
+ * ip4src, ip4dst, psrc, pdst, spi, etc. are expected to be in network
+ * byte order.
+ */
+struct ethtool_tcpip4_spec {
+	__be32	ip4src;
+	__be32	ip4dst;
+	__be16	psrc;
+	__be16	pdst;
+	__u8    tos;
+};
+
+struct ethtool_ah_espip4_spec {
+	__be32	ip4src;
+	__be32	ip4dst;
+	__be32	spi;
+	__u8    tos;
+};
+
+struct ethtool_rawip4_spec {
+	__be32	ip4src;
+	__be32	ip4dst;
+	__u8	hdata[64];
+};
+
+struct ethtool_ether_spec {
+	__be16	ether_type;
+	__u8	frame_size;
+	__u8	eframe[16];
+};
+
+#define	ETH_RX_NFC_IP4	1
+#define	ETH_RX_NFC_IP6	2
+
+struct ethtool_usrip4_spec {
+	__be32	ip4src;
+	__be32	ip4dst;
+	__be32	l4_4_bytes;
+	__u8    tos;
+	__u8    ip_ver;
+	__u8    proto;
+};
+
+struct ethtool_rx_flow_spec {
 	__u32		flow_type;
-	__u64		data;
+	union {
+		struct ethtool_tcpip4_spec		tcp_ip4_spec;
+		struct ethtool_tcpip4_spec		udp_ip4_spec;
+		struct ethtool_tcpip4_spec		sctp_ip4_spec;
+		struct ethtool_ah_espip4_spec		ah_ip4_spec;
+		struct ethtool_ah_espip4_spec		esp_ip4_spec;
+		struct ethtool_rawip4_spec		raw_ip4_spec;
+		struct ethtool_ether_spec		ether_spec;
+		struct ethtool_usrip4_spec		usr_ip4_spec;
+		__u8					hdata[64];
+	} h_u, m_u; /* entry, mask */
+	__u64		ring_cookie;
+	__u32		location;
+};
+
+struct ethtool_rxnfc {
+	__u32				cmd;
+	__u32				flow_type;
+	/* The rx flow hash value or the rule DB size */
+	__u64				data;
+	struct ethtool_rx_flow_spec	fs;
+	__u32				rule_cnt;
+	__u32				rule_locs[0];
 };

 #ifdef __KERNEL__
@ -417,8 +483,8 @@ struct ethtool_ops {
 	/* the following hooks are obsolete */
 	int	(*self_test_count)(struct net_device *);/* use get_sset_count */
 	int	(*get_stats_count)(struct net_device *);/* use get_sset_count */
-	int	(*get_rxhash)(struct net_device *, struct ethtool_rxnfc *);
-	int	(*set_rxhash)(struct net_device *, struct ethtool_rxnfc *);
+	int	(*get_rxnfc)(struct net_device *, struct ethtool_rxnfc *, void *);
+	int	(*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *);
 };
 #endif /* __KERNEL__ */

@ -469,6 +535,12 @@ struct ethtool_ops {
 #define	ETHTOOL_SRXFH		0x0000002a /* Set RX flow hash configuration */
 #define ETHTOOL_GGRO		0x0000002b /* Get GRO enable (ethtool_value) */
 #define ETHTOOL_SGRO		0x0000002c /* Set GRO enable (ethtool_value) */
+#define	ETHTOOL_GRXRINGS	0x0000002d /* Get RX rings available for LB */
+#define	ETHTOOL_GRXCLSRLCNT	0x0000002e /* Get RX class rule count */
+#define	ETHTOOL_GRXCLSRULE	0x0000002f /* Get RX classification rule */
+#define	ETHTOOL_GRXCLSRLALL	0x00000030 /* Get all RX classification rule */
+#define	ETHTOOL_SRXCLSRLDEL	0x00000031 /* Delete RX classification rule */
+#define	ETHTOOL_SRXCLSRLINS	0x00000032 /* Insert RX classification rule */

 /* compatibility with older code */
 #define SPARC_ETH_GSET		ETHTOOL_GSET
@ -565,9 +637,13 @@ struct ethtool_ops {
 #define	UDP_V6_FLOW	0x06
 #define	SCTP_V6_FLOW	0x07
 #define	AH_ESP_V6_FLOW	0x08
+#define	AH_V4_FLOW	0x09
+#define	ESP_V4_FLOW	0x0a
+#define	AH_V6_FLOW	0x0b
+#define	ESP_V6_FLOW	0x0c
+#define	IP_USER_FLOW	0x0d

 /* L3-L4 network traffic flow hash options */
-#define	RXH_DEV_PORT	(1 << 0)
 #define	RXH_L2DA	(1 << 1)
 #define	RXH_VLAN	(1 << 2)
 #define	RXH_L3_PROTO	(1 << 3)
@ -577,5 +653,6 @@ struct ethtool_ops {
 #define	RXH_L4_B_2_3	(1 << 7) /* dst port in case of TCP/UDP/SCTP */
 #define	RXH_DISCARD	(1 << 31)

+#define	RX_CLS_FLOW_DISC	0xffffffffffffffffULL

 #endif /* _LINUX_ETHTOOL_H */
--- a/include/linux/gen_stats.h
+++ b/include/linux/gen_stats.h
@ -22,7 +22,7 @@ struct gnet_stats_basic
 {
 	__u64	bytes;
 	__u32	packets;
-};
+} __attribute__ ((packed));

 /**
 * struct gnet_stats_rate_est - rate estimator
--- a/include/linux/hdlc.h
+++ b/include/linux/hdlc.h
@ -38,6 +38,7 @@ struct hdlc_proto {
 	int (*ioctl)(struct net_device *dev, struct ifreq *ifr);
 	__be16 (*type_trans)(struct sk_buff *skb, struct net_device *dev);
 	int (*netif_rx)(struct sk_buff *skb);
+	int (*xmit)(struct sk_buff *skb, struct net_device *dev);
 	struct module *module;
 	struct hdlc_proto *next; /* next protocol in the list */
 };
@ -102,6 +103,10 @@ static __inline__ void debug_frame(const struct sk_buff *skb)
 int hdlc_open(struct net_device *dev);
 /* Must be called by hardware driver when HDLC device is being closed */
 void hdlc_close(struct net_device *dev);
+/* May be used by hardware driver */
+int hdlc_change_mtu(struct net_device *dev, int new_mtu);
+/* Must be pointed to by hw driver's dev->netdev_ops->ndo_start_xmit */
+int hdlc_start_xmit(struct sk_buff *skb, struct net_device *dev);

 int attach_hdlc_protocol(struct net_device *dev, struct hdlc_proto *proto,
 			 size_t size);
--- a/include/linux/hdlcdrv.h
+++ b/include/linux/hdlcdrv.h
@ -215,7 +215,7 @@ struct hdlcdrv_state {

 	struct hdlcdrv_hdlctx {
 		struct hdlcdrv_hdlcbuffer hbuf;
-		long in_hdlc_tx;
+		unsigned long in_hdlc_tx;
 		/*
 		 * 0 = send flags
 		 * 1 = send txtail (flags)
@ -241,7 +241,6 @@ struct hdlcdrv_state {
 	struct hdlcdrv_bitbuffer bitbuf_hdlc;
 #endif /* HDLCDRV_DEBUG */

-	struct net_device_stats stats;
 	int ptt_keyed;

 	/* queued skb for transmission */
--- a/include/linux/ibmtr.h
+++ b/include/linux/ibmtr.h
@ -207,7 +207,7 @@ struct tok_info {
 	unsigned short exsap_station_id;
 	unsigned short global_int_enable;
 	struct sk_buff *current_skb;
-	struct net_device_stats tr_stats;
+
 	unsigned char auto_speedsave;
 	open_state			open_status, sap_status;
 	enum {MANUAL, AUTOMATIC}	open_mode;
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@ -527,6 +527,8 @@ struct ieee80211_tim_ie {
 	u8 virtual_map[0];
 } __attribute__ ((packed));

+#define WLAN_SA_QUERY_TR_ID_LEN 16
+
 struct ieee80211_mgmt {
 	__le16 frame_control;
 	__le16 duration;
@ -646,6 +648,10 @@ struct ieee80211_mgmt {
 					u8 action_code;
 					u8 variable[0];
 				} __attribute__((packed)) mesh_action;
+				struct {
+					u8 action;
+					u8 trans_id[WLAN_SA_QUERY_TR_ID_LEN];
+				} __attribute__ ((packed)) sa_query;
 			} u;
 		} __attribute__ ((packed)) action;
 	} u;
@ -655,6 +661,15 @@ struct ieee80211_mgmt {
 #define IEEE80211_MIN_ACTION_SIZE offsetof(struct ieee80211_mgmt, u.action.u)


+/* Management MIC information element (IEEE 802.11w) */
+struct ieee80211_mmie {
+	u8 element_id;
+	u8 length;
+	__le16 key_id;
+	u8 sequence_number[6];
+	u8 mic[8];
+} __attribute__ ((packed));
+
 /* Control frames */
 struct ieee80211_rts {
 	__le16 frame_control;
@ -899,6 +914,9 @@ enum ieee80211_statuscode {
 	/* 802.11g */
 	WLAN_STATUS_ASSOC_DENIED_NOSHORTTIME = 25,
 	WLAN_STATUS_ASSOC_DENIED_NODSSSOFDM = 26,
+	/* 802.11w */
+	WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY = 30,
+	WLAN_STATUS_ROBUST_MGMT_FRAME_POLICY_VIOLATION = 31,
 	/* 802.11i */
 	WLAN_STATUS_INVALID_IE = 40,
 	WLAN_STATUS_INVALID_GROUP_CIPHER = 41,
@ -1018,6 +1036,8 @@ enum ieee80211_eid {
 	WLAN_EID_HT_INFORMATION = 61,
 	/* 802.11i */
 	WLAN_EID_RSN = 48,
+	WLAN_EID_TIMEOUT_INTERVAL = 56,
+	WLAN_EID_MMIE = 76 /* 802.11w */,
 	WLAN_EID_WPA = 221,
 	WLAN_EID_GENERIC = 221,
 	WLAN_EID_VENDOR_SPECIFIC = 221,
@ -1030,6 +1050,8 @@ enum ieee80211_category {
 	WLAN_CATEGORY_QOS = 1,
 	WLAN_CATEGORY_DLS = 2,
 	WLAN_CATEGORY_BACK = 3,
+	WLAN_CATEGORY_PUBLIC = 4,
+	WLAN_CATEGORY_SA_QUERY = 8,
 	WLAN_CATEGORY_WMM = 17,
 };

@ -1104,6 +1126,12 @@ struct ieee80211_country_ie_triplet {
 	};
 } __attribute__ ((packed));

+enum ieee80211_timeout_interval_type {
+	WLAN_TIMEOUT_REASSOC_DEADLINE = 1 /* 802.11r */,
+	WLAN_TIMEOUT_KEY_LIFETIME = 2 /* 802.11r */,
+	WLAN_TIMEOUT_ASSOC_COMEBACK = 3 /* 802.11w */,
+};
+
 /* BACK action code */
 enum ieee80211_back_actioncode {
 	WLAN_ACTION_ADDBA_REQ = 0,
@ -1118,6 +1146,13 @@ enum ieee80211_back_parties {
 	WLAN_BACK_TIMER = 2,
 };

+/* SA Query action */
+enum ieee80211_sa_query_action {
+	WLAN_ACTION_SA_QUERY_REQUEST = 0,
+	WLAN_ACTION_SA_QUERY_RESPONSE = 1,
+};
+
+
 /* A-MSDU 802.11n */
 #define IEEE80211_QOS_CONTROL_A_MSDU_PRESENT 0x0080

@ -1128,6 +1163,7 @@ enum ieee80211_back_parties {
 /* reserved: 				0x000FAC03 */
 #define WLAN_CIPHER_SUITE_CCMP		0x000FAC04
 #define WLAN_CIPHER_SUITE_WEP104	0x000FAC05
+#define WLAN_CIPHER_SUITE_AES_CMAC	0x000FAC06

 #define WLAN_MAX_KEY_LEN		32

@ -1185,4 +1221,149 @@ static inline u8 *ieee80211_get_DA(struct ieee80211_hdr *hdr)
 		return hdr->addr1;
 }

+/**
+ * ieee80211_is_robust_mgmt_frame - check if frame is a robust management frame
+ * @hdr: the frame (buffer must include at least the first octet of payload)
+ */
+static inline bool ieee80211_is_robust_mgmt_frame(struct ieee80211_hdr *hdr)
+{
+	if (ieee80211_is_disassoc(hdr->frame_control) ||
+	    ieee80211_is_deauth(hdr->frame_control))
+		return true;
+
+	if (ieee80211_is_action(hdr->frame_control)) {
+		u8 *category;
+
+		/*
+		 * Action frames, excluding Public Action frames, are Robust
+		 * Management Frames. However, if we are looking at a Protected
+		 * frame, skip the check since the data may be encrypted and
+		 * the frame has already been found to be a Robust Management
+		 * Frame (by the other end).
+		 */
+		if (ieee80211_has_protected(hdr->frame_control))
+			return true;
+		category = ((u8 *) hdr) + 24;
+		return *category != WLAN_CATEGORY_PUBLIC;
+	}
+
+	return false;
+}
+
+/**
+ * ieee80211_fhss_chan_to_freq - get channel frequency
+ * @channel: the FHSS channel
+ *
+ * Convert IEEE802.11 FHSS channel to frequency (MHz)
+ * Ref IEEE 802.11-2007 section 14.6
+ */
+static inline int ieee80211_fhss_chan_to_freq(int channel)
+{
+	if ((channel > 1) && (channel < 96))
+		return channel + 2400;
+	else
+		return -1;
+}
+
+/**
+ * ieee80211_freq_to_fhss_chan - get channel
+ * @freq: the channels frequency
+ *
+ * Convert frequency (MHz) to IEEE802.11 FHSS channel
+ * Ref IEEE 802.11-2007 section 14.6
+ */
+static inline int ieee80211_freq_to_fhss_chan(int freq)
+{
+	if ((freq > 2401) && (freq < 2496))
+		return freq - 2400;
+	else
+		return -1;
+}
+
+/**
+ * ieee80211_dsss_chan_to_freq - get channel center frequency
+ * @channel: the DSSS channel
+ *
+ * Convert IEEE802.11 DSSS channel to the center frequency (MHz).
+ * Ref IEEE 802.11-2007 section 15.6
+ */
+static inline int ieee80211_dsss_chan_to_freq(int channel)
+{
+	if ((channel > 0) && (channel < 14))
+		return 2407 + (channel * 5);
+	else if (channel == 14)
+		return 2484;
+	else
+		return -1;
+}
+
+/**
+ * ieee80211_freq_to_dsss_chan - get channel
+ * @freq: the frequency
+ *
+ * Convert frequency (MHz) to IEEE802.11 DSSS channel
+ * Ref IEEE 802.11-2007 section 15.6
+ *
+ * This routine selects the channel with the closest center frequency.
+ */
+static inline int ieee80211_freq_to_dsss_chan(int freq)
+{
+	if ((freq >= 2410) && (freq < 2475))
+		return (freq - 2405) / 5;
+	else if ((freq >= 2482) && (freq < 2487))
+		return 14;
+	else
+		return -1;
+}
+
+/* Convert IEEE802.11 HR DSSS channel to frequency (MHz) and back
+ * Ref IEEE 802.11-2007 section 18.4.6.2
+ *
+ * The channels and frequencies are the same as those defined for DSSS
+ */
+#define ieee80211_hr_chan_to_freq(chan) ieee80211_dsss_chan_to_freq(chan)
+#define ieee80211_freq_to_hr_chan(freq) ieee80211_freq_to_dsss_chan(freq)
+
+/* Convert IEEE802.11 ERP channel to frequency (MHz) and back
+ * Ref IEEE 802.11-2007 section 19.4.2
+ */
+#define ieee80211_erp_chan_to_freq(chan) ieee80211_hr_chan_to_freq(chan)
+#define ieee80211_freq_to_erp_chan(freq) ieee80211_freq_to_hr_chan(freq)
+
+/**
+ * ieee80211_ofdm_chan_to_freq - get channel center frequency
+ * @s_freq: starting frequency == (dotChannelStartingFactor/2) MHz
+ * @channel: the OFDM channel
+ *
+ * Convert IEEE802.11 OFDM channel to center frequency (MHz)
+ * Ref IEEE 802.11-2007 section 17.3.8.3.2
+ */
+static inline int ieee80211_ofdm_chan_to_freq(int s_freq, int channel)
+{
+	if ((channel > 0) && (channel <= 200) &&
+	    (s_freq >= 4000))
+		return s_freq + (channel * 5);
+	else
+		return -1;
+}
+
+/**
+ * ieee80211_freq_to_ofdm_channel - get channel
+ * @s_freq: starting frequency == (dotChannelStartingFactor/2) MHz
+ * @freq: the frequency
+ *
+ * Convert frequency (MHz) to IEEE802.11 OFDM channel
+ * Ref IEEE 802.11-2007 section 17.3.8.3.2
+ *
+ * This routine selects the channel with the closest center frequency.
+ */
+static inline int ieee80211_freq_to_ofdm_chan(int s_freq, int freq)
+{
+	if ((freq > (s_freq + 2)) && (freq <= (s_freq + 1202)) &&
+	    (s_freq >= 4000))
+		return (freq + 2 - s_freq) / 5;
+	else
+		return -1;
+}
+
 #endif /* LINUX_IEEE80211_H */
--- a/include/linux/if.h
+++ b/include/linux/if.h
@ -66,6 +66,7 @@
 #define IFF_SLAVE_NEEDARP 0x40		/* need ARPs for validation	*/
 #define IFF_ISATAP	0x80		/* ISATAP interface (RFC4214)	*/
 #define IFF_MASTER_ARPMON 0x100		/* bonding master, ARP mon in use */
+#define IFF_WAN_HDLC	0x200		/* WAN HDLC device		*/

 #define IF_GET_IFACE	0x0001		/* for querying only */
 #define IF_GET_PROTO	0x0002
--- a/include/linux/if_ether.h
+++ b/include/linux/if_ether.h
@ -17,7 +17,7 @@
 *		as published by the Free Software Foundation; either version
 *		2 of the License, or (at your option) any later version.
 */
- 
+
 #ifndef _LINUX_IF_ETHER_H
 #define _LINUX_IF_ETHER_H

@ -25,7 +25,7 @@

 /*
 *	IEEE 802.3 Ethernet magic constants.  The frame sizes omit the preamble
- *	and FCS/CRC (frame check sequence). 
+ *	and FCS/CRC (frame check sequence).
 */

 #define ETH_ALEN	6		/* Octets in one ethernet addr	 */
@ -83,7 +83,7 @@
 /*
 *	Non DIX types. Won't clash for 1500 types.
 */
- 
+
 #define ETH_P_802_3	0x0001		/* Dummy type for 802.3 frames  */
 #define ETH_P_AX25	0x0002		/* Dummy protocol id for AX.25  */
 #define ETH_P_ALL	0x0003		/* Every packet (be careful!!!) */
@ -109,7 +109,7 @@
 /*
 *	This is an Ethernet frame header.
 */
- 
+
 struct ethhdr {
 	unsigned char	h_dest[ETH_ALEN];	/* destination eth addr	*/
 	unsigned char	h_source[ETH_ALEN];	/* source ether addr	*/
--- a/include/linux/if_pppox.h
+++ b/include/linux/if_pppox.h
@ -95,16 +95,16 @@ struct pppoe_tag {
 } __attribute ((packed));

 /* Tag identifiers */
-#define PTT_EOL		__constant_htons(0x0000)
-#define PTT_SRV_NAME	__constant_htons(0x0101)
-#define PTT_AC_NAME	__constant_htons(0x0102)
-#define PTT_HOST_UNIQ	__constant_htons(0x0103)
-#define PTT_AC_COOKIE	__constant_htons(0x0104)
-#define PTT_VENDOR 	__constant_htons(0x0105)
-#define PTT_RELAY_SID	__constant_htons(0x0110)
-#define PTT_SRV_ERR     __constant_htons(0x0201)
-#define PTT_SYS_ERR  	__constant_htons(0x0202)
-#define PTT_GEN_ERR  	__constant_htons(0x0203)
+#define PTT_EOL		__cpu_to_be16(0x0000)
+#define PTT_SRV_NAME	__cpu_to_be16(0x0101)
+#define PTT_AC_NAME	__cpu_to_be16(0x0102)
+#define PTT_HOST_UNIQ	__cpu_to_be16(0x0103)
+#define PTT_AC_COOKIE	__cpu_to_be16(0x0104)
+#define PTT_VENDOR 	__cpu_to_be16(0x0105)
+#define PTT_RELAY_SID	__cpu_to_be16(0x0110)
+#define PTT_SRV_ERR     __cpu_to_be16(0x0201)
+#define PTT_SYS_ERR  	__cpu_to_be16(0x0202)
+#define PTT_GEN_ERR  	__cpu_to_be16(0x0203)

 struct pppoe_hdr {
 #if defined(__LITTLE_ENDIAN_BITFIELD)
--- a/include/linux/if_tun.h
+++ b/include/linux/if_tun.h
@ -46,6 +46,8 @@
 #define TUNSETOFFLOAD  _IOW('T', 208, unsigned int)
 #define TUNSETTXFILTER _IOW('T', 209, unsigned int)
 #define TUNGETIFF      _IOR('T', 210, unsigned int)
+#define TUNGETSNDBUF   _IOR('T', 211, int)
+#define TUNSETSNDBUF   _IOW('T', 212, int)

 /* TUNSETIFF ifr flags */
 #define IFF_TUN		0x0001
--- a/include/linux/if_tunnel.h
+++ b/include/linux/if_tunnel.h
@ -16,14 +16,14 @@
 #define SIOCDELPRL      (SIOCDEVPRIVATE + 6)
 #define SIOCCHGPRL      (SIOCDEVPRIVATE + 7)

-#define GRE_CSUM	__constant_htons(0x8000)
-#define GRE_ROUTING	__constant_htons(0x4000)
-#define GRE_KEY		__constant_htons(0x2000)
-#define GRE_SEQ		__constant_htons(0x1000)
-#define GRE_STRICT	__constant_htons(0x0800)
-#define GRE_REC		__constant_htons(0x0700)
-#define GRE_FLAGS	__constant_htons(0x00F8)
-#define GRE_VERSION	__constant_htons(0x0007)
+#define GRE_CSUM	__cpu_to_be16(0x8000)
+#define GRE_ROUTING	__cpu_to_be16(0x4000)
+#define GRE_KEY		__cpu_to_be16(0x2000)
+#define GRE_SEQ		__cpu_to_be16(0x1000)
+#define GRE_STRICT	__cpu_to_be16(0x0800)
+#define GRE_REC		__cpu_to_be16(0x0700)
+#define GRE_FLAGS	__cpu_to_be16(0x00F8)
+#define GRE_VERSION	__cpu_to_be16(0x0007)

 struct ip_tunnel_parm
 {
--- a/include/linux/inetdevice.h
+++ b/include/linux/inetdevice.h
@ -108,6 +108,7 @@ static inline void ipv4_devconf_setall(struct in_device *in_dev)
 #define IN_DEV_ARPFILTER(in_dev)	IN_DEV_ORCONF((in_dev), ARPFILTER)
 #define IN_DEV_ARP_ANNOUNCE(in_dev)	IN_DEV_MAXCONF((in_dev), ARP_ANNOUNCE)
 #define IN_DEV_ARP_IGNORE(in_dev)	IN_DEV_MAXCONF((in_dev), ARP_IGNORE)
+#define IN_DEV_ARP_NOTIFY(in_dev)	IN_DEV_MAXCONF((in_dev), ARP_NOTIFY)

 struct in_ifaddr
 {
--- a/include/linux/mroute.h
+++ b/include/linux/mroute.h
@ -193,6 +193,9 @@ struct vif_device
 struct mfc_cache 
 {
 	struct mfc_cache *next;			/* Next entry on cache line 	*/
+#ifdef CONFIG_NET_NS
+	struct net *mfc_net;
+#endif
 	__be32 mfc_mcastgrp;			/* Group the entry belongs to 	*/
 	__be32 mfc_origin;			/* Source of packet 		*/
 	vifi_t mfc_parent;			/* Source interface		*/
@ -215,6 +218,18 @@ struct mfc_cache
 	} mfc_un;
 };

+static inline
+struct net *mfc_net(const struct mfc_cache *mfc)
+{
+	return read_pnet(&mfc->mfc_net);
+}
+
+static inline
+void mfc_net_set(struct mfc_cache *mfc, struct net *net)
+{
+	write_pnet(&mfc->mfc_net, hold_net(net));
+}
+
 #define MFC_STATIC		1
 #define MFC_NOTIFY		2

@ -241,7 +256,8 @@ struct mfc_cache

 #ifdef __KERNEL__
 struct rtmsg;
-extern int ipmr_get_route(struct sk_buff *skb, struct rtmsg *rtm, int nowait);
+extern int ipmr_get_route(struct net *net, struct sk_buff *skb,
+			  struct rtmsg *rtm, int nowait);
 #endif

 #endif
--- a/include/linux/ncp_no.h
+++ b/include/linux/ncp_no.h
@ -2,18 +2,18 @@
 #define _NCP_NO

 /* these define the attribute byte as seen by NCP */
-#define aRONLY			(__constant_cpu_to_le32(1))
-#define aHIDDEN			(__constant_cpu_to_le32(2))
-#define aSYSTEM			(__constant_cpu_to_le32(4))
-#define aEXECUTE		(__constant_cpu_to_le32(8))
-#define aDIR			(__constant_cpu_to_le32(0x10))
-#define aARCH			(__constant_cpu_to_le32(0x20))
-#define aSHARED			(__constant_cpu_to_le32(0x80))
-#define aDONTSUBALLOCATE	(__constant_cpu_to_le32(1L<<11))
-#define aTRANSACTIONAL		(__constant_cpu_to_le32(1L<<12))
-#define aPURGE			(__constant_cpu_to_le32(1L<<16))
-#define aRENAMEINHIBIT		(__constant_cpu_to_le32(1L<<17))
-#define aDELETEINHIBIT		(__constant_cpu_to_le32(1L<<18))
-#define aDONTCOMPRESS		(__constant_cpu_to_le32(1L<<27))
+#define aRONLY			(__cpu_to_le32(1))
+#define aHIDDEN			(__cpu_to_le32(2))
+#define aSYSTEM			(__cpu_to_le32(4))
+#define aEXECUTE		(__cpu_to_le32(8))
+#define aDIR			(__cpu_to_le32(0x10))
+#define aARCH			(__cpu_to_le32(0x20))
+#define aSHARED			(__cpu_to_le32(0x80))
+#define aDONTSUBALLOCATE	(__cpu_to_le32(1L<<11))
+#define aTRANSACTIONAL		(__cpu_to_le32(1L<<12))
+#define aPURGE			(__cpu_to_le32(1L<<16))
+#define aRENAMEINHIBIT		(__cpu_to_le32(1L<<17))
+#define aDELETEINHIBIT		(__cpu_to_le32(1L<<18))
+#define aDONTCOMPRESS		(__cpu_to_le32(1L<<27))

 #endif /* _NCP_NO */
--- a/include/linux/neighbour.h
+++ b/include/linux/neighbour.h
@ -31,6 +31,7 @@ enum
 *	Neighbor Cache Entry Flags
 */

+#define NTF_USE		0x01
 #define NTF_PROXY	0x08	/* == ATF_PUBL */
 #define NTF_ROUTER	0x80

--- a/include/linux/net.h
+++ b/include/linux/net.h
@ -129,11 +129,15 @@ struct socket {
 	socket_state		state;
 	short			type;
 	unsigned long		flags;
-	const struct proto_ops	*ops;
+	/*
+	 * Please keep fasync_list & wait fields in the same cache line
+	 */
 	struct fasync_struct	*fasync_list;
+	wait_queue_head_t	wait;
+
 	struct file		*file;
 	struct sock		*sk;
-	wait_queue_head_t	wait;
+	const struct proto_ops	*ops;
 };

 struct vm_area_struct;
--- a/include/linux/net_dropmon.h
+++ b/include/linux/net_dropmon.h
@ -0,0 +1,56 @@
+#ifndef __NET_DROPMON_H
+#define __NET_DROPMON_H
+
+#include <linux/netlink.h>
+
+struct net_dm_drop_point {
+	__u8 pc[8];
+	__u32 count;
+};
+
+#define NET_DM_CFG_VERSION  0
+#define NET_DM_CFG_ALERT_COUNT  1
+#define NET_DM_CFG_ALERT_DELAY 2
+#define NET_DM_CFG_MAX 3
+
+struct net_dm_config_entry {
+	__u32 type;
+	__u64 data __attribute__((aligned(8)));
+};
+
+struct net_dm_config_msg {
+	__u32 entries;
+	struct net_dm_config_entry options[0];
+};
+
+struct net_dm_alert_msg {
+	__u32 entries;
+	struct net_dm_drop_point points[0];
+};
+
+struct net_dm_user_msg {
+	union {
+		struct net_dm_config_msg user;
+		struct net_dm_alert_msg alert;
+	} u;
+};
+
+
+/* These are the netlink message types for this protocol */
+
+enum {
+	NET_DM_CMD_UNSPEC = 0,
+	NET_DM_CMD_ALERT,
+	NET_DM_CMD_CONFIG,
+	NET_DM_CMD_START,
+	NET_DM_CMD_STOP,
+	_NET_DM_CMD_MAX,
+};
+
+#define NET_DM_CMD_MAX (_NET_DM_CMD_MAX - 1)
+
+/*
+ * Our group identifiers
+ */
+#define NET_DM_GRP_ALERT 1
+#endif
--- a/include/linux/net_tstamp.h
+++ b/include/linux/net_tstamp.h
@ -0,0 +1,104 @@
+/*
+ * Userspace API for hardware time stamping of network packets
+ *
+ * Copyright (C) 2008,2009 Intel Corporation
+ * Author: Patrick Ohly <patrick.ohly@intel.com>
+ *
+ */
+
+#ifndef _NET_TIMESTAMPING_H
+#define _NET_TIMESTAMPING_H
+
+#include <linux/socket.h>   /* for SO_TIMESTAMPING */
+
+/* SO_TIMESTAMPING gets an integer bit field comprised of these values */
+enum {
+	SOF_TIMESTAMPING_TX_HARDWARE = (1<<0),
+	SOF_TIMESTAMPING_TX_SOFTWARE = (1<<1),
+	SOF_TIMESTAMPING_RX_HARDWARE = (1<<2),
+	SOF_TIMESTAMPING_RX_SOFTWARE = (1<<3),
+	SOF_TIMESTAMPING_SOFTWARE = (1<<4),
+	SOF_TIMESTAMPING_SYS_HARDWARE = (1<<5),
+	SOF_TIMESTAMPING_RAW_HARDWARE = (1<<6),
+	SOF_TIMESTAMPING_MASK =
+	(SOF_TIMESTAMPING_RAW_HARDWARE - 1) |
+	SOF_TIMESTAMPING_RAW_HARDWARE
+};
+
+/**
+ * struct hwtstamp_config - %SIOCSHWTSTAMP parameter
+ *
+ * @flags:	no flags defined right now, must be zero
+ * @tx_type:	one of HWTSTAMP_TX_*
+ * @rx_type:	one of one of HWTSTAMP_FILTER_*
+ *
+ * %SIOCSHWTSTAMP expects a &struct ifreq with a ifr_data pointer to
+ * this structure. dev_ifsioc() in the kernel takes care of the
+ * translation between 32 bit userspace and 64 bit kernel. The
+ * structure is intentionally chosen so that it has the same layout on
+ * 32 and 64 bit systems, don't break this!
+ */
+struct hwtstamp_config {
+	int flags;
+	int tx_type;
+	int rx_filter;
+};
+
+/* possible values for hwtstamp_config->tx_type */
+enum {
+	/*
+	 * No outgoing packet will need hardware time stamping;
+	 * should a packet arrive which asks for it, no hardware
+	 * time stamping will be done.
+	 */
+	HWTSTAMP_TX_OFF,
+
+	/*
+	 * Enables hardware time stamping for outgoing packets;
+	 * the sender of the packet decides which are to be
+	 * time stamped by setting %SOF_TIMESTAMPING_TX_SOFTWARE
+	 * before sending the packet.
+	 */
+	HWTSTAMP_TX_ON,
+};
+
+/* possible values for hwtstamp_config->rx_filter */
+enum {
+	/* time stamp no incoming packet at all */
+	HWTSTAMP_FILTER_NONE,
+
+	/* time stamp any incoming packet */
+	HWTSTAMP_FILTER_ALL,
+
+	/* return value: time stamp all packets requested plus some others */
+	HWTSTAMP_FILTER_SOME,
+
+	/* PTP v1, UDP, any kind of event packet */
+	HWTSTAMP_FILTER_PTP_V1_L4_EVENT,
+	/* PTP v1, UDP, Sync packet */
+	HWTSTAMP_FILTER_PTP_V1_L4_SYNC,
+	/* PTP v1, UDP, Delay_req packet */
+	HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ,
+	/* PTP v2, UDP, any kind of event packet */
+	HWTSTAMP_FILTER_PTP_V2_L4_EVENT,
+	/* PTP v2, UDP, Sync packet */
+	HWTSTAMP_FILTER_PTP_V2_L4_SYNC,
+	/* PTP v2, UDP, Delay_req packet */
+	HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ,
+
+	/* 802.AS1, Ethernet, any kind of event packet */
+	HWTSTAMP_FILTER_PTP_V2_L2_EVENT,
+	/* 802.AS1, Ethernet, Sync packet */
+	HWTSTAMP_FILTER_PTP_V2_L2_SYNC,
+	/* 802.AS1, Ethernet, Delay_req packet */
+	HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ,
+
+	/* PTP v2/802.AS1, any layer, any kind of event packet */
+	HWTSTAMP_FILTER_PTP_V2_EVENT,
+	/* PTP v2/802.AS1, any layer, Sync packet */
+	HWTSTAMP_FILTER_PTP_V2_SYNC,
+	/* PTP v2/802.AS1, any layer, Delay_req packet */
+	HWTSTAMP_FILTER_PTP_V2_DELAY_REQ,
+};
+
+#endif /* _NET_TIMESTAMPING_H */
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@ -96,7 +96,7 @@ struct wireless_dev;
 *	Compute the worst case header length according to the protocols
 *	used.
 */
- 
+
 #if defined(CONFIG_WLAN_80211) || defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
 # if defined(CONFIG_MAC80211_MESH)
 #  define LL_MAX_HEADER 128
@ -124,7 +124,7 @@ struct wireless_dev;
 *	Network device statistics. Akin to the 2.0 ether stats but
 *	with byte counters.
 */
- 
+
 struct net_device_stats
 {
 	unsigned long	rx_packets;		/* total packets received	*/
@ -285,7 +285,7 @@ enum netdev_state_t

 /*
 * This structure holds at boot time configured netdevice settings. They
- * are then used in the device probing. 
+ * are then used in the device probing.
 */
 struct netdev_boot_setup {
 	char name[IFNAMSIZ];
@ -314,6 +314,9 @@ struct napi_struct {
 	spinlock_t		poll_lock;
 	int			poll_owner;
 #endif
+
+	unsigned int		gro_count;
+
 	struct net_device	*dev;
 	struct list_head	dev_list;
 	struct sk_buff		*gro_list;
@ -327,6 +330,14 @@ enum
 	NAPI_STATE_NPSVC,	/* Netpoll - don't dequeue from poll_list */
 };

+enum {
+	GRO_MERGED,
+	GRO_MERGED_FREE,
+	GRO_HELD,
+	GRO_NORMAL,
+	GRO_DROP,
+};
+
 extern void __napi_schedule(struct napi_struct *n);

 static inline int napi_disable_pending(struct napi_struct *n)
@ -740,7 +751,7 @@ struct net_device
 	void			*dsa_ptr;	/* dsa specific data */
 #endif
 	void 			*atalk_ptr;	/* AppleTalk link 	*/
-	void			*ip_ptr;	/* IPv4 specific data	*/  
+	void			*ip_ptr;	/* IPv4 specific data	*/
 	void                    *dn_ptr;        /* DECnet specific data */
 	void                    *ip6_ptr;       /* IPv6 specific data */
 	void			*ec_ptr;	/* Econet specific data	*/
@ -753,7 +764,7 @@ struct net_device
 */
 	unsigned long		last_rx;	/* Time of last Rx	*/
 	/* Interface address info used in eth_type_trans() */
-	unsigned char		dev_addr[MAX_ADDR_LEN];	/* hw address, (before bcast 
+	unsigned char		dev_addr[MAX_ADDR_LEN];	/* hw address, (before bcast
 							   because most packets are unicast) */

 	unsigned char		broadcast[MAX_ADDR_LEN];	/* hw bcast add	*/
@ -984,6 +995,9 @@ void netif_napi_add(struct net_device *dev, struct napi_struct *napi,
 void netif_napi_del(struct napi_struct *napi);

 struct napi_gro_cb {
+	/* This indicates where we are processing relative to skb->data. */
+	int data_offset;
+
 	/* This is non-zero if the packet may be of the same flow. */
 	int same_flow;

@ -1088,6 +1102,36 @@ extern int		dev_restart(struct net_device *dev);
 #ifdef CONFIG_NETPOLL_TRAP
 extern int		netpoll_trap(void);
 #endif
+extern void	      *skb_gro_header(struct sk_buff *skb, unsigned int hlen);
+extern int	       skb_gro_receive(struct sk_buff **head,
+				       struct sk_buff *skb);
+
+static inline unsigned int skb_gro_offset(const struct sk_buff *skb)
+{
+	return NAPI_GRO_CB(skb)->data_offset;
+}
+
+static inline unsigned int skb_gro_len(const struct sk_buff *skb)
+{
+	return skb->len - NAPI_GRO_CB(skb)->data_offset;
+}
+
+static inline void skb_gro_pull(struct sk_buff *skb, unsigned int len)
+{
+	NAPI_GRO_CB(skb)->data_offset += len;
+}
+
+static inline void skb_gro_reset_offset(struct sk_buff *skb)
+{
+	NAPI_GRO_CB(skb)->data_offset = 0;
+}
+
+static inline void *skb_gro_mac_header(struct sk_buff *skb)
+{
+	return skb_mac_header(skb) < skb->data ? skb_mac_header(skb) :
+	       page_address(skb_shinfo(skb)->frags[0].page) +
+	       skb_shinfo(skb)->frags[0].page_offset;
+}

 static inline int dev_hard_header(struct sk_buff *skb, struct net_device *dev,
 				  unsigned short type,
@ -1376,12 +1420,15 @@ extern int		netif_receive_skb(struct sk_buff *skb);
 extern void		napi_gro_flush(struct napi_struct *napi);
 extern int		dev_gro_receive(struct napi_struct *napi,
 					struct sk_buff *skb);
+extern int		napi_skb_finish(int ret, struct sk_buff *skb);
 extern int		napi_gro_receive(struct napi_struct *napi,
 					 struct sk_buff *skb);
 extern void		napi_reuse_skb(struct napi_struct *napi,
 				       struct sk_buff *skb);
 extern struct sk_buff *	napi_fraginfo_skb(struct napi_struct *napi,
 					  struct napi_gro_fraginfo *info);
+extern int		napi_frags_finish(struct napi_struct *napi,
+					  struct sk_buff *skb, int ret);
 extern int		napi_gro_frags(struct napi_struct *napi,
 				       struct napi_gro_fraginfo *info);
 extern void		netif_nit_deliver(struct sk_buff *skb);
@ -1575,56 +1622,6 @@ static inline u32 netif_msg_init(int debug_value, int default_msg_enable_bits)
 	return (1 << debug_value) - 1;
 }

-/* Test if receive needs to be scheduled but only if up */
-static inline int netif_rx_schedule_prep(struct napi_struct *napi)
-{
-	return napi_schedule_prep(napi);
-}
-
-/* Add interface to tail of rx poll list. This assumes that _prep has
- * already been called and returned 1.
- */
-static inline void __netif_rx_schedule(struct napi_struct *napi)
-{
-	__napi_schedule(napi);
-}
-
-/* Try to reschedule poll. Called by irq handler. */
-
-static inline void netif_rx_schedule(struct napi_struct *napi)
-{
-	if (netif_rx_schedule_prep(napi))
-		__netif_rx_schedule(napi);
-}
-
-/* Try to reschedule poll. Called by dev->poll() after netif_rx_complete().  */
-static inline int netif_rx_reschedule(struct napi_struct *napi)
-{
-	if (napi_schedule_prep(napi)) {
-		__netif_rx_schedule(napi);
-		return 1;
-	}
-	return 0;
-}
-
-/* same as netif_rx_complete, except that local_irq_save(flags)
- * has already been issued
- */
-static inline void __netif_rx_complete(struct napi_struct *napi)
-{
-	__napi_complete(napi);
-}
-
-/* Remove interface from poll list: it must be in the poll list
- * on current cpu. This primitive is called by dev->poll(), when
- * it completes the work. The device cannot be out of poll list at this
- * moment, it is BUG().
- */
-static inline void netif_rx_complete(struct napi_struct *napi)
-{
-	napi_complete(napi);
-}
-
 static inline void __netif_tx_lock(struct netdev_queue *txq, int cpu)
 {
 	spin_lock(&txq->_xmit_lock);
@ -1875,7 +1872,7 @@ static inline int skb_bond_should_drop(struct sk_buff *skb)

 		if (dev->priv_flags & IFF_SLAVE_INACTIVE) {
 			if ((dev->priv_flags & IFF_SLAVE_NEEDARP) &&
-			    skb->protocol == __constant_htons(ETH_P_ARP))
+			    skb->protocol == __cpu_to_be16(ETH_P_ARP))
 				return 0;

 			if (master->priv_flags & IFF_MASTER_ALB) {
@ -1884,7 +1881,7 @@ static inline int skb_bond_should_drop(struct sk_buff *skb)
 					return 0;
 			}
 			if (master->priv_flags & IFF_MASTER_8023AD &&
-			    skb->protocol == __constant_htons(ETH_P_SLOW))
+			    skb->protocol == __cpu_to_be16(ETH_P_SLOW))
 				return 0;

 			return 1;
--- a/include/linux/netfilter/Kbuild
+++ b/include/linux/netfilter/Kbuild
@ -7,16 +7,21 @@ header-y += xt_CLASSIFY.h
 header-y += xt_CONNMARK.h
 header-y += xt_CONNSECMARK.h
 header-y += xt_DSCP.h
+header-y += xt_LED.h
 header-y += xt_MARK.h
 header-y += xt_NFLOG.h
 header-y += xt_NFQUEUE.h
 header-y += xt_RATEEST.h
 header-y += xt_SECMARK.h
 header-y += xt_TCPMSS.h
+header-y += xt_TCPOPTSTRIP.h
+header-y += xt_TPROXY.h
 header-y += xt_comment.h
 header-y += xt_connbytes.h
+header-y += xt_connlimit.h
 header-y += xt_connmark.h
 header-y += xt_conntrack.h
+header-y += xt_cluster.h
 header-y += xt_dccp.h
 header-y += xt_dscp.h
 header-y += xt_esp.h
@ -30,6 +35,7 @@ header-y += xt_mark.h
 header-y += xt_multiport.h
 header-y += xt_owner.h
 header-y += xt_pkttype.h
+header-y += xt_quota.h
 header-y += xt_rateest.h
 header-y += xt_realm.h
 header-y += xt_recent.h
@ -39,6 +45,8 @@ header-y += xt_statistic.h
 header-y += xt_string.h
 header-y += xt_tcpmss.h
 header-y += xt_tcpudp.h
+header-y += xt_time.h
+header-y += xt_u32.h

 unifdef-y += nf_conntrack_common.h
 unifdef-y += nf_conntrack_ftp.h
--- a/include/linux/netfilter/nfnetlink.h
+++ b/include/linux/netfilter/nfnetlink.h
@ -76,6 +76,7 @@ extern int nfnetlink_subsys_unregister(const struct nfnetlink_subsystem *n);
 extern int nfnetlink_has_listeners(unsigned int group);
 extern int nfnetlink_send(struct sk_buff *skb, u32 pid, unsigned group, 
 			  int echo);
+extern void nfnetlink_set_err(u32 pid, u32 group, int error);
 extern int nfnetlink_unicast(struct sk_buff *skb, u_int32_t pid, int flags);

 extern void nfnl_lock(void);
--- a/include/linux/netfilter/x_tables.h
+++ b/include/linux/netfilter/x_tables.h
@ -349,23 +349,22 @@ struct xt_table
 {
 	struct list_head list;

-	/* A unique name... */
-	const char name[XT_TABLE_MAXNAMELEN];
-
 	/* What hooks you will enter on */
 	unsigned int valid_hooks;

 	/* Lock for the curtain */
-	rwlock_t lock;
+	struct mutex lock;

 	/* Man behind the curtain... */
-	//struct ip6t_table_info *private;
-	void *private;
+	struct xt_table_info *private;

 	/* Set this to THIS_MODULE if you are a module, otherwise NULL */
 	struct module *me;

 	u_int8_t af;		/* address/protocol family */
+
+	/* A unique name... */
+	const char name[XT_TABLE_MAXNAMELEN];
 };

 #include <linux/netfilter_ipv4.h>
@ -386,7 +385,7 @@ struct xt_table_info

 	/* ipt_entry tables: one per CPU */
 	/* Note : this field MUST be the last one, see XT_TABLE_INFO_SZ */
-	char *entries[1];
+	void *entries[1];
 };

 #define XT_TABLE_INFO_SZ (offsetof(struct xt_table_info, entries) \
@ -433,6 +432,8 @@ extern void xt_proto_fini(struct net *net, u_int8_t af);

 extern struct xt_table_info *xt_alloc_table_info(unsigned int size);
 extern void xt_free_table_info(struct xt_table_info *info);
+extern void xt_table_entry_swap_rcu(struct xt_table_info *old,
+				    struct xt_table_info *new);

 #ifdef CONFIG_COMPAT
 #include <net/compat.h>
--- a/include/linux/netfilter/xt_LED.h
+++ b/include/linux/netfilter/xt_LED.h
@ -0,0 +1,13 @@
+#ifndef _XT_LED_H
+#define _XT_LED_H
+
+struct xt_led_info {
+	char id[27];        /* Unique ID for this trigger in the LED class */
+	__u8 always_blink;  /* Blink even if the LED is already on */
+	__u32 delay;        /* Delay until LED is switched off after trigger */
+
+	/* Kernel data used in the module */
+	void *internal_data __attribute__((aligned(8)));
+};
+
+#endif /* _XT_LED_H */
--- a/include/linux/netfilter/xt_cluster.h
+++ b/include/linux/netfilter/xt_cluster.h
@ -0,0 +1,15 @@
+#ifndef _XT_CLUSTER_MATCH_H
+#define _XT_CLUSTER_MATCH_H
+
+enum xt_cluster_flags {
+	XT_CLUSTER_F_INV	= (1 << 0)
+};
+
+struct xt_cluster_match_info {
+	u_int32_t		total_nodes;
+	u_int32_t		node_mask;
+	u_int32_t		hash_seed;
+	u_int32_t		flags;
+};
+
+#endif /* _XT_CLUSTER_MATCH_H */
--- a/include/linux/netfilter/xt_limit.h
+++ b/include/linux/netfilter/xt_limit.h
@ -4,6 +4,8 @@
 /* timings are in milliseconds. */
 #define XT_LIMIT_SCALE 10000

+struct xt_limit_priv;
+
 /* 1/10,000 sec period => max of 10,000/sec.  Min rate is then 429490
   seconds, or one every 59 hours. */
 struct xt_rateinfo {
@ -11,11 +13,10 @@ struct xt_rateinfo {
 	u_int32_t burst;  /* Period multiplier for upper limit. */

 	/* Used internally by the kernel */
-	unsigned long prev;
-	u_int32_t credit;
+	unsigned long prev; /* moved to xt_limit_priv */
+	u_int32_t credit; /* moved to xt_limit_priv */
 	u_int32_t credit_cap, cost;

-	/* Ugly, ugly fucker. */
-	struct xt_rateinfo *master;
+	struct xt_limit_priv *master;
 };
 #endif /*_XT_RATE_H*/
--- a/include/linux/netfilter/xt_quota.h
+++ b/include/linux/netfilter/xt_quota.h
@ -6,13 +6,15 @@ enum xt_quota_flags {
 };
 #define XT_QUOTA_MASK		0x1

+struct xt_quota_priv;
+
 struct xt_quota_info {
 	u_int32_t		flags;
 	u_int32_t		pad;

 	/* Used internally by the kernel */
 	aligned_u64		quota;
-	struct xt_quota_info	*master;
+	struct xt_quota_priv	*master;
 };

 #endif /* _XT_QUOTA_H */
--- a/include/linux/netfilter/xt_statistic.h
+++ b/include/linux/netfilter/xt_statistic.h
@ -13,6 +13,8 @@ enum xt_statistic_flags {
 };
 #define XT_STATISTIC_MASK		0x1

+struct xt_statistic_priv;
+
 struct xt_statistic_info {
 	u_int16_t			mode;
 	u_int16_t			flags;
@ -23,11 +25,10 @@ struct xt_statistic_info {
 		struct {
 			u_int32_t	every;
 			u_int32_t	packet;
-			/* Used internally by the kernel */
-			u_int32_t	count;
+			u_int32_t	count; /* unused */
 		} nth;
 	} u;
-	struct xt_statistic_info	*master __attribute__((aligned(8)));
+	struct xt_statistic_priv *master __attribute__((aligned(8)));
 };

 #endif /* _XT_STATISTIC_H */
--- a/include/linux/netfilter_bridge.h
+++ b/include/linux/netfilter_bridge.h
@ -59,9 +59,9 @@ static inline int nf_bridge_maybe_copy_header(struct sk_buff *skb)
 static inline unsigned int nf_bridge_encap_header_len(const struct sk_buff *skb)
 {
 	switch (skb->protocol) {
-	case __constant_htons(ETH_P_8021Q):
+	case __cpu_to_be16(ETH_P_8021Q):
 		return VLAN_HLEN;
-	case __constant_htons(ETH_P_PPP_SES):
+	case __cpu_to_be16(ETH_P_PPP_SES):
 		return PPPOE_SES_HLEN;
 	default:
 		return 0;
--- a/include/linux/netfilter_ipv6/Kbuild
+++ b/include/linux/netfilter_ipv6/Kbuild
@ -11,6 +11,7 @@ header-y += ip6t_length.h
 header-y += ip6t_limit.h
 header-y += ip6t_mac.h
 header-y += ip6t_mark.h
+header-y += ip6t_mh.h
 header-y += ip6t_multiport.h
 header-y += ip6t_opts.h
 header-y += ip6t_owner.h
--- a/include/linux/netlink.h
+++ b/include/linux/netlink.h
@ -103,6 +103,8 @@ struct nlmsgerr
 #define NETLINK_ADD_MEMBERSHIP	1
 #define NETLINK_DROP_MEMBERSHIP	2
 #define NETLINK_PKTINFO		3
+#define NETLINK_BROADCAST_ERROR	4
+#define NETLINK_NO_ENOBUFS	5

 struct nl_pktinfo
 {
--- a/include/linux/netpoll.h
+++ b/include/linux/netpoll.h
@ -63,6 +63,13 @@ static inline int netpoll_rx(struct sk_buff *skb)
 	return ret;
 }

+static inline int netpoll_rx_on(struct sk_buff *skb)
+{
+	struct netpoll_info *npinfo = skb->dev->npinfo;
+
+	return npinfo && (npinfo->rx_np || npinfo->rx_flags);
+}
+
 static inline int netpoll_receive_skb(struct sk_buff *skb)
 {
 	if (!list_empty(&skb->dev->napi_list))
@ -99,6 +106,10 @@ static inline int netpoll_rx(struct sk_buff *skb)
 {
 	return 0;
 }
+static inline int netpoll_rx_on(struct sk_buff *skb)
+{
+	return 0;
+}
 static inline int netpoll_receive_skb(struct sk_buff *skb)
 {
 	return 0;
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@ -47,7 +47,7 @@
 * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
 *	%NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
 *	%NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, and/or
- *	%NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET.
+ *	%NL80211_ATTR_WIPHY_CHANNEL_TYPE.
 * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
 *	or rename notification. Has attributes %NL80211_ATTR_WIPHY and
 *	%NL80211_ATTR_WIPHY_NAME.
@ -72,8 +72,8 @@
 *
 * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified
 *	by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC.
- * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT or
- *	%NL80211_ATTR_KEY_THRESHOLD.
+ * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT,
+ *	%NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD.
 * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA,
 *	%NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC and %NL80211_ATTR_KEY_CIPHER
 *	attributes.
@ -84,7 +84,7 @@
 *	%NL80222_CMD_NEW_BEACON message)
 * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface
 *	using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD,
- *	%NL80211_BEACON_HEAD and %NL80211_BEACON_TAIL attributes.
+ *	%NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes.
 * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface,
 *	parameters are like for %NL80211_CMD_SET_BEACON.
 * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it
@ -113,6 +113,8 @@
 * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
 *	%NL80211_ATTR_IFINDEX.
 *
+ * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set
+ * 	regulatory domain.
 * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
 *	after being queried by the kernel. CRDA replies by sending a regulatory
 *	domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
@ -133,6 +135,32 @@
 * @NL80211_CMD_SET_MESH_PARAMS: Set mesh networking properties for the
 *      interface identified by %NL80211_ATTR_IFINDEX
 *
+ * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The
+ *	interface is identified with %NL80211_ATTR_IFINDEX and the management
+ *	frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be
+ *	added to the end of the specified management frame is specified with
+ *	%NL80211_ATTR_IE. If the command succeeds, the requested data will be
+ *	added to all specified management frames generated by
+ *	kernel/firmware/driver.
+ *
+ * @NL80211_CMD_GET_SCAN: get scan results
+ * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
+ * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to
+ *	NL80211_CMD_GET_SCAN and on the "scan" multicast group)
+ * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
+ *	partial scan results may be available
+ *
+ * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
+ * 	has been changed and provides details of the request information
+ * 	that caused the change such as who initiated the regulatory request
+ * 	(%NL80211_ATTR_REG_INITIATOR), the wiphy_idx
+ * 	(%NL80211_ATTR_REG_ALPHA2) on which the request was made from if
+ * 	the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or
+ * 	%NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain
+ * 	set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
+ * 	%NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
+ * 	to (%NL80211_ATTR_REG_ALPHA2).
+ *
 * @NL80211_CMD_MAX: highest used command number
 * @__NL80211_CMD_AFTER_LAST: internal use
 */
@ -178,6 +206,17 @@ enum nl80211_commands {
 	NL80211_CMD_GET_MESH_PARAMS,
 	NL80211_CMD_SET_MESH_PARAMS,

+	NL80211_CMD_SET_MGMT_EXTRA_IE,
+
+	NL80211_CMD_GET_REG,
+
+	NL80211_CMD_GET_SCAN,
+	NL80211_CMD_TRIGGER_SCAN,
+	NL80211_CMD_NEW_SCAN_RESULTS,
+	NL80211_CMD_SCAN_ABORTED,
+
+	NL80211_CMD_REG_CHANGE,
+
 	/* add new commands above here */

 	/* used to define NL80211_CMD_MAX below */
@ -190,6 +229,9 @@ enum nl80211_commands {
 * here
 */
 #define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS
+#define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE
+
+#define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE

 /**
 * enum nl80211_attrs - nl80211 netlink attributes
@ -284,6 +326,29 @@ enum nl80211_commands {
 *	supported interface types, each a flag attribute with the number
 *	of the interface mode.
 *
+ * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for
+ *	%NL80211_CMD_SET_MGMT_EXTRA_IE.
+ *
+ * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with
+ *	%NL80211_CMD_SET_MGMT_EXTRA_IE).
+ *
+ * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with
+ *	a single scan request, a wiphy attribute.
+ *
+ * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
+ * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
+ *	scanning and include a zero-length SSID (wildcard) for wildcard scan
+ * @NL80211_ATTR_SCAN_GENERATION: the scan generation increases whenever the
+ *	scan result list changes (BSS expired or added) so that applications
+ *	can verify that they got a single, consistent snapshot (when all dump
+ *	messages carried the same generation number)
+ * @NL80211_ATTR_BSS: scan result BSS
+ *
+ * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain
+ * 	currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*
+ * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently
+ * 	set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
+ *
 * @NL80211_ATTR_MAX: highest attribute number currently defined
 * @__NL80211_ATTR_AFTER_LAST: internal use
 */
@ -346,6 +411,21 @@ enum nl80211_attrs {
 	NL80211_ATTR_WIPHY_FREQ,
 	NL80211_ATTR_WIPHY_CHANNEL_TYPE,

+	NL80211_ATTR_KEY_DEFAULT_MGMT,
+
+	NL80211_ATTR_MGMT_SUBTYPE,
+	NL80211_ATTR_IE,
+
+	NL80211_ATTR_MAX_NUM_SCAN_SSIDS,
+
+	NL80211_ATTR_SCAN_FREQUENCIES,
+	NL80211_ATTR_SCAN_SSIDS,
+	NL80211_ATTR_SCAN_GENERATION,
+	NL80211_ATTR_BSS,
+
+	NL80211_ATTR_REG_INITIATOR,
+	NL80211_ATTR_REG_TYPE,
+
 	/* add attributes here, update the policy in nl80211.c */

 	__NL80211_ATTR_AFTER_LAST,
@ -360,7 +440,11 @@ enum nl80211_attrs {
 #define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
 #define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS
 #define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ
-#define NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET
+#define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE
+#define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE
+#define NL80211_ATTR_IE NL80211_ATTR_IE
+#define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR
+#define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE

 #define NL80211_MAX_SUPP_RATES			32
 #define NL80211_MAX_SUPP_REG_RULES		32
@ -412,12 +496,14 @@ enum nl80211_iftype {
 * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames
 *	with short barker preamble
 * @NL80211_STA_FLAG_WME: station is WME/QoS capable
+ * @NL80211_STA_FLAG_MFP: station uses management frame protection
 */
 enum nl80211_sta_flags {
 	__NL80211_STA_FLAG_INVALID,
 	NL80211_STA_FLAG_AUTHORIZED,
 	NL80211_STA_FLAG_SHORT_PREAMBLE,
 	NL80211_STA_FLAG_WME,
+	NL80211_STA_FLAG_MFP,

 	/* keep last */
 	__NL80211_STA_FLAG_AFTER_LAST,
@ -465,6 +551,9 @@ enum nl80211_rate_info {
 * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
 * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
 * 	containing info as possible, see &enum nl80211_sta_info_txrate.
+ * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
+ * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
+ *	station)
 */
 enum nl80211_sta_info {
 	__NL80211_STA_INFO_INVALID,
@ -476,6 +565,8 @@ enum nl80211_sta_info {
 	NL80211_STA_INFO_PLINK_STATE,
 	NL80211_STA_INFO_SIGNAL,
 	NL80211_STA_INFO_TX_BITRATE,
+	NL80211_STA_INFO_RX_PACKETS,
+	NL80211_STA_INFO_TX_PACKETS,

 	/* keep last */
 	__NL80211_STA_INFO_AFTER_LAST,
@ -606,6 +697,48 @@ enum nl80211_bitrate_attr {
 	NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1
 };

+/**
+ * enum nl80211_initiator - Indicates the initiator of a reg domain request
+ * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world
+ * 	regulatory domain.
+ * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the
+ * 	regulatory domain.
+ * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the
+ * 	wireless core it thinks its knows the regulatory domain we should be in.
+ * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
+ * 	802.11 country information element with regulatory information it
+ * 	thinks we should consider.
+ */
+enum nl80211_reg_initiator {
+	NL80211_REGDOM_SET_BY_CORE,
+	NL80211_REGDOM_SET_BY_USER,
+	NL80211_REGDOM_SET_BY_DRIVER,
+	NL80211_REGDOM_SET_BY_COUNTRY_IE,
+};
+
+/**
+ * enum nl80211_reg_type - specifies the type of regulatory domain
+ * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains
+ *	to a specific country. When this is set you can count on the
+ *	ISO / IEC 3166 alpha2 country code being valid.
+ * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory
+ * 	domain.
+ * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom
+ * 	driver specific world regulatory domain. These do not apply system-wide
+ * 	and are only applicable to the individual devices which have requested
+ * 	them to be applied.
+ * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product
+ *	of an intersection between two regulatory domains -- the previously
+ *	set regulatory domain on the system and the last accepted regulatory
+ *	domain request to be processed.
+ */
+enum nl80211_reg_type {
+	NL80211_REGDOM_TYPE_COUNTRY,
+	NL80211_REGDOM_TYPE_WORLD,
+	NL80211_REGDOM_TYPE_CUSTOM_WORLD,
+	NL80211_REGDOM_TYPE_INTERSECTION,
+};
+
 /**
 * enum nl80211_reg_rule_attr - regulatory rule attributes
 * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
@ -811,4 +944,38 @@ enum nl80211_channel_type {
 	NL80211_CHAN_HT40MINUS,
 	NL80211_CHAN_HT40PLUS
 };
+
+/**
+ * enum nl80211_bss - netlink attributes for a BSS
+ *
+ * @__NL80211_BSS_INVALID: invalid
+ * @NL80211_BSS_FREQUENCY: frequency in MHz (u32)
+ * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64)
+ * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16)
+ * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16)
+ * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the
+ *	raw information elements from the probe response/beacon (bin)
+ * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon
+ *	in mBm (100 * dBm) (s32)
+ * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon
+ *	in unspecified units, scaled to 0..100 (u8)
+ * @__NL80211_BSS_AFTER_LAST: internal
+ * @NL80211_BSS_MAX: highest BSS attribute
+ */
+enum nl80211_bss {
+	__NL80211_BSS_INVALID,
+	NL80211_BSS_BSSID,
+	NL80211_BSS_FREQUENCY,
+	NL80211_BSS_TSF,
+	NL80211_BSS_BEACON_INTERVAL,
+	NL80211_BSS_CAPABILITY,
+	NL80211_BSS_INFORMATION_ELEMENTS,
+	NL80211_BSS_SIGNAL_MBM,
+	NL80211_BSS_SIGNAL_UNSPEC,
+
+	/* keep last */
+	__NL80211_BSS_AFTER_LAST,
+	NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1
+};
+
 #endif /* __LINUX_NL80211_H */
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@ -834,6 +834,8 @@
 #define PCI_DEVICE_ID_PROMISE_20276	0x5275
 #define PCI_DEVICE_ID_PROMISE_20277	0x7275

+#define PCI_VENDOR_ID_FOXCONN		0x105b
+
 #define PCI_VENDOR_ID_UMC		0x1060
 #define PCI_DEVICE_ID_UMC_UM8673F	0x0101
 #define PCI_DEVICE_ID_UMC_UM8886BF	0x673a
@ -1971,6 +1973,8 @@

 #define PCI_VENDOR_ID_SAMSUNG		0x144d

+#define PCI_VENDOR_ID_AMBIT		0x1468
+
 #define PCI_VENDOR_ID_MYRICOM		0x14c1

 #define PCI_VENDOR_ID_TITAN		0x14D2
@ -2217,6 +2221,8 @@

 #define PCI_VENDOR_ID_TOPSPIN		0x1867

+#define PCI_VENDOR_ID_SILAN		0x1904
+
 #define PCI_VENDOR_ID_TDI               0x192E
 #define PCI_DEVICE_ID_TDI_EHCI          0x0101

--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@ -315,8 +315,7 @@ struct phy_device {

 	/* Interrupt and Polling infrastructure */
 	struct work_struct phy_queue;
-	struct work_struct state_queue;
-	struct timer_list phy_timer;
+	struct delayed_work state_queue;
 	atomic_t irq_disable;

 	struct mutex lock;
--- a/include/linux/pim.h
+++ b/include/linux/pim.h
@ -4,14 +4,14 @@
 #include <asm/byteorder.h>

 /* Message types - V1 */
-#define PIM_V1_VERSION		__constant_htonl(0x10000000)
+#define PIM_V1_VERSION		cpu_to_be32(0x10000000)
 #define PIM_V1_REGISTER		1

 /* Message types - V2 */
 #define PIM_VERSION		2
 #define PIM_REGISTER		1

-#define PIM_NULL_REGISTER	__constant_htonl(0x40000000)
+#define PIM_NULL_REGISTER	cpu_to_be32(0x40000000)

 /* PIMv2 register message header layout (ietf-draft-idmr-pimvsm-v2-00.ps */
 struct pimreghdr
--- a/include/linux/ppp_channel.h
+++ b/include/linux/ppp_channel.h
@ -22,6 +22,7 @@
 #include <linux/list.h>
 #include <linux/skbuff.h>
 #include <linux/poll.h>
+#include <net/net_namespace.h>

 struct ppp_channel;

@ -39,8 +40,8 @@ struct ppp_channel {
 	int		mtu;		/* max transmit packet size */
 	int		hdrlen;		/* amount of headroom channel needs */
 	void		*ppp;		/* opaque to channel */
-	/* the following are not used at present */
 	int		speed;		/* transfer rate (bytes/second) */
+	/* the following is not used at present */
 	int		latency;	/* overhead time in milliseconds */
 };

@ -56,6 +57,9 @@ extern void ppp_input(struct ppp_channel *, struct sk_buff *);
   that we may have missed a packet. */
 extern void ppp_input_error(struct ppp_channel *, int code);

+/* Attach a channel to a given PPP unit in specified net. */
+extern int ppp_register_net_channel(struct net *, struct ppp_channel *);
+
 /* Attach a channel to a given PPP unit. */
 extern int ppp_register_channel(struct ppp_channel *);

--- a/include/linux/rds.h
+++ b/include/linux/rds.h
@ -0,0 +1,250 @@
+/*
+ * Copyright (c) 2008 Oracle.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#ifndef _LINUX_RDS_H
+#define _LINUX_RDS_H
+
+#include <linux/types.h>
+
+/* These sparse annotated types shouldn't be in any user
+ * visible header file. We should clean this up rather
+ * than kludging around them. */
+#ifndef __KERNEL__
+#define __be16	u_int16_t
+#define __be32	u_int32_t
+#define __be64	u_int64_t
+#endif
+
+#define RDS_IB_ABI_VERSION		0x301
+
+/*
+ * setsockopt/getsockopt for SOL_RDS
+ */
+#define RDS_CANCEL_SENT_TO      	1
+#define RDS_GET_MR			2
+#define RDS_FREE_MR			3
+/* deprecated: RDS_BARRIER 4 */
+#define RDS_RECVERR			5
+#define RDS_CONG_MONITOR		6
+
+/*
+ * Control message types for SOL_RDS.
+ *
+ * CMSG_RDMA_ARGS (sendmsg)
+ *	Request a RDMA transfer to/from the specified
+ *	memory ranges.
+ *	The cmsg_data is a struct rds_rdma_args.
+ * RDS_CMSG_RDMA_DEST (recvmsg, sendmsg)
+ *	Kernel informs application about intended
+ *	source/destination of a RDMA transfer
+ * RDS_CMSG_RDMA_MAP (sendmsg)
+ *	Application asks kernel to map the given
+ *	memory range into a IB MR, and send the
+ *	R_Key along in an RDS extension header.
+ *	The cmsg_data is a struct rds_get_mr_args,
+ *	the same as for the GET_MR setsockopt.
+ * RDS_CMSG_RDMA_STATUS (recvmsg)
+ *	Returns the status of a completed RDMA operation.
+ */
+#define RDS_CMSG_RDMA_ARGS		1
+#define RDS_CMSG_RDMA_DEST		2
+#define RDS_CMSG_RDMA_MAP		3
+#define RDS_CMSG_RDMA_STATUS		4
+#define RDS_CMSG_CONG_UPDATE		5
+
+#define RDS_INFO_FIRST			10000
+#define RDS_INFO_COUNTERS		10000
+#define RDS_INFO_CONNECTIONS		10001
+/* 10002 aka RDS_INFO_FLOWS is deprecated */
+#define RDS_INFO_SEND_MESSAGES		10003
+#define RDS_INFO_RETRANS_MESSAGES       10004
+#define RDS_INFO_RECV_MESSAGES          10005
+#define RDS_INFO_SOCKETS                10006
+#define RDS_INFO_TCP_SOCKETS            10007
+#define RDS_INFO_IB_CONNECTIONS		10008
+#define RDS_INFO_CONNECTION_STATS	10009
+#define RDS_INFO_IWARP_CONNECTIONS	10010
+#define RDS_INFO_LAST			10010
+
+struct rds_info_counter {
+	u_int8_t	name[32];
+	u_int64_t	value;
+} __attribute__((packed));
+
+#define RDS_INFO_CONNECTION_FLAG_SENDING	0x01
+#define RDS_INFO_CONNECTION_FLAG_CONNECTING	0x02
+#define RDS_INFO_CONNECTION_FLAG_CONNECTED	0x04
+
+#define TRANSNAMSIZ	16
+
+struct rds_info_connection {
+	u_int64_t	next_tx_seq;
+	u_int64_t	next_rx_seq;
+	__be32		laddr;
+	__be32		faddr;
+	u_int8_t	transport[TRANSNAMSIZ];		/* null term ascii */
+	u_int8_t	flags;
+} __attribute__((packed));
+
+struct rds_info_flow {
+	__be32		laddr;
+	__be32		faddr;
+	u_int32_t	bytes;
+	__be16		lport;
+	__be16		fport;
+} __attribute__((packed));
+
+#define RDS_INFO_MESSAGE_FLAG_ACK               0x01
+#define RDS_INFO_MESSAGE_FLAG_FAST_ACK          0x02
+
+struct rds_info_message {
+	u_int64_t	seq;
+	u_int32_t	len;
+	__be32		laddr;
+	__be32		faddr;
+	__be16		lport;
+	__be16		fport;
+	u_int8_t	flags;
+} __attribute__((packed));
+
+struct rds_info_socket {
+	u_int32_t	sndbuf;
+	__be32		bound_addr;
+	__be32		connected_addr;
+	__be16		bound_port;
+	__be16		connected_port;
+	u_int32_t	rcvbuf;
+	u_int64_t	inum;
+} __attribute__((packed));
+
+#define RDS_IB_GID_LEN	16
+struct rds_info_rdma_connection {
+	__be32		src_addr;
+	__be32		dst_addr;
+	uint8_t		src_gid[RDS_IB_GID_LEN];
+	uint8_t		dst_gid[RDS_IB_GID_LEN];
+
+	uint32_t	max_send_wr;
+	uint32_t	max_recv_wr;
+	uint32_t	max_send_sge;
+	uint32_t	rdma_mr_max;
+	uint32_t	rdma_mr_size;
+};
+
+/*
+ * Congestion monitoring.
+ * Congestion control in RDS happens at the host connection
+ * level by exchanging a bitmap marking congested ports.
+ * By default, a process sleeping in poll() is always woken
+ * up when the congestion map is updated.
+ * With explicit monitoring, an application can have more
+ * fine-grained control.
+ * The application installs a 64bit mask value in the socket,
+ * where each bit corresponds to a group of ports.
+ * When a congestion update arrives, RDS checks the set of
+ * ports that are now uncongested against the list bit mask
+ * installed in the socket, and if they overlap, we queue a
+ * cong_notification on the socket.
+ *
+ * To install the congestion monitor bitmask, use RDS_CONG_MONITOR
+ * with the 64bit mask.
+ * Congestion updates are received via RDS_CMSG_CONG_UPDATE
+ * control messages.
+ *
+ * The correspondence between bits and ports is
+ *	1 << (portnum % 64)
+ */
+#define RDS_CONG_MONITOR_SIZE	64
+#define RDS_CONG_MONITOR_BIT(port)  (((unsigned int) port) % RDS_CONG_MONITOR_SIZE)
+#define RDS_CONG_MONITOR_MASK(port) (1ULL << RDS_CONG_MONITOR_BIT(port))
+
+/*
+ * RDMA related types
+ */
+
+/*
+ * This encapsulates a remote memory location.
+ * In the current implementation, it contains the R_Key
+ * of the remote memory region, and the offset into it
+ * (so that the application does not have to worry about
+ * alignment).
+ */
+typedef u_int64_t	rds_rdma_cookie_t;
+
+struct rds_iovec {
+	u_int64_t	addr;
+	u_int64_t	bytes;
+};
+
+struct rds_get_mr_args {
+	struct rds_iovec vec;
+	u_int64_t	cookie_addr;
+	uint64_t	flags;
+};
+
+struct rds_free_mr_args {
+	rds_rdma_cookie_t cookie;
+	u_int64_t	flags;
+};
+
+struct rds_rdma_args {
+	rds_rdma_cookie_t cookie;
+	struct rds_iovec remote_vec;
+	u_int64_t	local_vec_addr;
+	u_int64_t	nr_local;
+	u_int64_t	flags;
+	u_int64_t	user_token;
+};
+
+struct rds_rdma_notify {
+	u_int64_t	user_token;
+	int32_t		status;
+};
+
+#define RDS_RDMA_SUCCESS	0
+#define RDS_RDMA_REMOTE_ERROR	1
+#define RDS_RDMA_CANCELED	2
+#define RDS_RDMA_DROPPED	3
+#define RDS_RDMA_OTHER_ERROR	4
+
+/*
+ * Common set of flags for all RDMA related structs
+ */
+#define RDS_RDMA_READWRITE	0x0001
+#define RDS_RDMA_FENCE		0x0002	/* use FENCE for immediate send */
+#define RDS_RDMA_INVALIDATE	0x0004	/* invalidate R_Key after freeing MR */
+#define RDS_RDMA_USE_ONCE	0x0008	/* free MR after use */
+#define RDS_RDMA_DONTWAIT	0x0010	/* Don't wait in SET_BARRIER */
+#define RDS_RDMA_NOTIFY_ME	0x0020	/* Notify when operation completes */
+
+#endif /* IB_RDS_H */
--- a/include/linux/rtnetlink.h
+++ b/include/linux/rtnetlink.h
@ -217,6 +217,7 @@ enum
 #define RTPROT_DNROUTED	13	/* DECnet routing daemon */
 #define RTPROT_XORP	14	/* XORP */
 #define RTPROT_NTK	15	/* Netsukuku */
+#define RTPROT_DHCP	16      /* DHCP client */

 /* rtm_scope

@ -622,8 +623,8 @@ static __inline__ int rtattr_strcmp(const struct rtattr *rta, const char *str)

 extern int rtnetlink_send(struct sk_buff *skb, struct net *net, u32 pid, u32 group, int echo);
 extern int rtnl_unicast(struct sk_buff *skb, struct net *net, u32 pid);
-extern int rtnl_notify(struct sk_buff *skb, struct net *net, u32 pid, u32 group,
-		       struct nlmsghdr *nlh, gfp_t flags);
+extern void rtnl_notify(struct sk_buff *skb, struct net *net, u32 pid,
+			u32 group, struct nlmsghdr *nlh, gfp_t flags);
 extern void rtnl_set_sk_err(struct net *net, u32 group, int error);
 extern int rtnetlink_put_metrics(struct sk_buff *skb, u32 *metrics);
 extern int rtnl_put_cacheinfo(struct sk_buff *skb, struct dst_entry *dst,
--- a/include/linux/sctp.h
+++ b/include/linux/sctp.h
@ -60,7 +60,7 @@ typedef struct sctphdr {
 	__be16 source;
 	__be16 dest;
 	__be32 vtag;
-	__be32 checksum;
+	__le32 checksum;
 } __attribute__((packed)) sctp_sctphdr_t;

 #ifdef __KERNEL__
@ -172,35 +172,35 @@ typedef struct sctp_paramhdr {
 typedef enum {

 	/* RFC 2960 Section 3.3.5 */
-	SCTP_PARAM_HEARTBEAT_INFO		= __constant_htons(1),
+	SCTP_PARAM_HEARTBEAT_INFO		= cpu_to_be16(1),
 	/* RFC 2960 Section 3.3.2.1 */
-	SCTP_PARAM_IPV4_ADDRESS			= __constant_htons(5),
-	SCTP_PARAM_IPV6_ADDRESS			= __constant_htons(6),
-	SCTP_PARAM_STATE_COOKIE			= __constant_htons(7),
-	SCTP_PARAM_UNRECOGNIZED_PARAMETERS	= __constant_htons(8),
-	SCTP_PARAM_COOKIE_PRESERVATIVE		= __constant_htons(9),
-	SCTP_PARAM_HOST_NAME_ADDRESS		= __constant_htons(11),
-	SCTP_PARAM_SUPPORTED_ADDRESS_TYPES	= __constant_htons(12),
-	SCTP_PARAM_ECN_CAPABLE			= __constant_htons(0x8000),
+	SCTP_PARAM_IPV4_ADDRESS			= cpu_to_be16(5),
+	SCTP_PARAM_IPV6_ADDRESS			= cpu_to_be16(6),
+	SCTP_PARAM_STATE_COOKIE			= cpu_to_be16(7),
+	SCTP_PARAM_UNRECOGNIZED_PARAMETERS	= cpu_to_be16(8),
+	SCTP_PARAM_COOKIE_PRESERVATIVE		= cpu_to_be16(9),
+	SCTP_PARAM_HOST_NAME_ADDRESS		= cpu_to_be16(11),
+	SCTP_PARAM_SUPPORTED_ADDRESS_TYPES	= cpu_to_be16(12),
+	SCTP_PARAM_ECN_CAPABLE			= cpu_to_be16(0x8000),

 	/* AUTH Extension Section 3 */
-	SCTP_PARAM_RANDOM			= __constant_htons(0x8002),
-	SCTP_PARAM_CHUNKS			= __constant_htons(0x8003),
-	SCTP_PARAM_HMAC_ALGO			= __constant_htons(0x8004),
+	SCTP_PARAM_RANDOM			= cpu_to_be16(0x8002),
+	SCTP_PARAM_CHUNKS			= cpu_to_be16(0x8003),
+	SCTP_PARAM_HMAC_ALGO			= cpu_to_be16(0x8004),

 	/* Add-IP: Supported Extensions, Section 4.2 */
-	SCTP_PARAM_SUPPORTED_EXT	= __constant_htons(0x8008),
+	SCTP_PARAM_SUPPORTED_EXT	= cpu_to_be16(0x8008),

 	/* PR-SCTP Sec 3.1 */
-	SCTP_PARAM_FWD_TSN_SUPPORT	= __constant_htons(0xc000),
+	SCTP_PARAM_FWD_TSN_SUPPORT	= cpu_to_be16(0xc000),

 	/* Add-IP Extension. Section 3.2 */
-	SCTP_PARAM_ADD_IP		= __constant_htons(0xc001),
-	SCTP_PARAM_DEL_IP		= __constant_htons(0xc002),
-	SCTP_PARAM_ERR_CAUSE		= __constant_htons(0xc003),
-	SCTP_PARAM_SET_PRIMARY		= __constant_htons(0xc004),
-	SCTP_PARAM_SUCCESS_REPORT	= __constant_htons(0xc005),
-	SCTP_PARAM_ADAPTATION_LAYER_IND = __constant_htons(0xc006),
+	SCTP_PARAM_ADD_IP		= cpu_to_be16(0xc001),
+	SCTP_PARAM_DEL_IP		= cpu_to_be16(0xc002),
+	SCTP_PARAM_ERR_CAUSE		= cpu_to_be16(0xc003),
+	SCTP_PARAM_SET_PRIMARY		= cpu_to_be16(0xc004),
+	SCTP_PARAM_SUCCESS_REPORT	= cpu_to_be16(0xc005),
+	SCTP_PARAM_ADAPTATION_LAYER_IND = cpu_to_be16(0xc006),

 } sctp_param_t; /* enum */

@ -212,13 +212,13 @@ typedef enum {
 *
 */
 typedef enum {
-	SCTP_PARAM_ACTION_DISCARD     = __constant_htons(0x0000),
-	SCTP_PARAM_ACTION_DISCARD_ERR = __constant_htons(0x4000),
-	SCTP_PARAM_ACTION_SKIP        = __constant_htons(0x8000),
-	SCTP_PARAM_ACTION_SKIP_ERR    = __constant_htons(0xc000),
+	SCTP_PARAM_ACTION_DISCARD     = cpu_to_be16(0x0000),
+	SCTP_PARAM_ACTION_DISCARD_ERR = cpu_to_be16(0x4000),
+	SCTP_PARAM_ACTION_SKIP        = cpu_to_be16(0x8000),
+	SCTP_PARAM_ACTION_SKIP_ERR    = cpu_to_be16(0xc000),
 } sctp_param_action_t;

-enum { SCTP_PARAM_ACTION_MASK = __constant_htons(0xc000), };
+enum { SCTP_PARAM_ACTION_MASK = cpu_to_be16(0xc000), };

 /* RFC 2960 Section 3.3.1 Payload Data (DATA) (0) */

@ -457,17 +457,17 @@ typedef struct sctp_operr_chunk {
 */
 typedef enum {

-	SCTP_ERROR_NO_ERROR	   = __constant_htons(0x00),
-	SCTP_ERROR_INV_STRM	   = __constant_htons(0x01),
-	SCTP_ERROR_MISS_PARAM 	   = __constant_htons(0x02),
-	SCTP_ERROR_STALE_COOKIE	   = __constant_htons(0x03),
-	SCTP_ERROR_NO_RESOURCE 	   = __constant_htons(0x04),
-	SCTP_ERROR_DNS_FAILED      = __constant_htons(0x05),
-	SCTP_ERROR_UNKNOWN_CHUNK   = __constant_htons(0x06),
-	SCTP_ERROR_INV_PARAM       = __constant_htons(0x07),
-	SCTP_ERROR_UNKNOWN_PARAM   = __constant_htons(0x08),
-	SCTP_ERROR_NO_DATA         = __constant_htons(0x09),
-	SCTP_ERROR_COOKIE_IN_SHUTDOWN = __constant_htons(0x0a),
+	SCTP_ERROR_NO_ERROR	   = cpu_to_be16(0x00),
+	SCTP_ERROR_INV_STRM	   = cpu_to_be16(0x01),
+	SCTP_ERROR_MISS_PARAM 	   = cpu_to_be16(0x02),
+	SCTP_ERROR_STALE_COOKIE	   = cpu_to_be16(0x03),
+	SCTP_ERROR_NO_RESOURCE 	   = cpu_to_be16(0x04),
+	SCTP_ERROR_DNS_FAILED      = cpu_to_be16(0x05),
+	SCTP_ERROR_UNKNOWN_CHUNK   = cpu_to_be16(0x06),
+	SCTP_ERROR_INV_PARAM       = cpu_to_be16(0x07),
+	SCTP_ERROR_UNKNOWN_PARAM   = cpu_to_be16(0x08),
+	SCTP_ERROR_NO_DATA         = cpu_to_be16(0x09),
+	SCTP_ERROR_COOKIE_IN_SHUTDOWN = cpu_to_be16(0x0a),


 	/* SCTP Implementation Guide:
@ -476,9 +476,9 @@ typedef enum {
 	 *  13  Protocol Violation
 	 */

-	SCTP_ERROR_RESTART         = __constant_htons(0x0b),
-	SCTP_ERROR_USER_ABORT      = __constant_htons(0x0c),
-	SCTP_ERROR_PROTO_VIOLATION = __constant_htons(0x0d),
+	SCTP_ERROR_RESTART         = cpu_to_be16(0x0b),
+	SCTP_ERROR_USER_ABORT      = cpu_to_be16(0x0c),
+	SCTP_ERROR_PROTO_VIOLATION = cpu_to_be16(0x0d),

 	/* ADDIP Section 3.3  New Error Causes
 	 *
@ -493,11 +493,11 @@ typedef enum {
 	 * 0x0103          Association Aborted due to illegal ASCONF-ACK
 	 * 0x0104          Request refused - no authorization.
 	 */
-	SCTP_ERROR_DEL_LAST_IP	= __constant_htons(0x0100),
-	SCTP_ERROR_RSRC_LOW	= __constant_htons(0x0101),
-	SCTP_ERROR_DEL_SRC_IP	= __constant_htons(0x0102),
-	SCTP_ERROR_ASCONF_ACK   = __constant_htons(0x0103),
-	SCTP_ERROR_REQ_REFUSED	= __constant_htons(0x0104),
+	SCTP_ERROR_DEL_LAST_IP	= cpu_to_be16(0x0100),
+	SCTP_ERROR_RSRC_LOW	= cpu_to_be16(0x0101),
+	SCTP_ERROR_DEL_SRC_IP	= cpu_to_be16(0x0102),
+	SCTP_ERROR_ASCONF_ACK   = cpu_to_be16(0x0103),
+	SCTP_ERROR_REQ_REFUSED	= cpu_to_be16(0x0104),

 	/* AUTH Section 4.  New Error Cause
 	 *
@ -509,7 +509,7 @@ typedef enum {
 	 * --------------------------------------------------------------
 	 * 0x0105          Unsupported HMAC Identifier
 	 */
-	 SCTP_ERROR_UNSUP_HMAC	= __constant_htons(0x0105)
+	 SCTP_ERROR_UNSUP_HMAC	= cpu_to_be16(0x0105)
 } sctp_error_t;


--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@ -29,9 +29,6 @@
 #include <linux/dmaengine.h>
 #include <linux/hrtimer.h>

-#define HAVE_ALLOC_SKB		/* For the drivers to know */
-#define HAVE_ALIGNABLE_SKB	/* Ditto 8)		   */
-
 /* Don't change this without changing skb_csum_unnecessary! */
 #define CHECKSUM_NONE 0
 #define CHECKSUM_UNNECESSARY 1
@ -135,6 +132,55 @@ struct skb_frag_struct {
 	__u32 size;
 };

+#define HAVE_HW_TIME_STAMP
+
+/**
+ * struct skb_shared_hwtstamps - hardware time stamps
+ * @hwtstamp:	hardware time stamp transformed into duration
+ *		since arbitrary point in time
+ * @syststamp:	hwtstamp transformed to system time base
+ *
+ * Software time stamps generated by ktime_get_real() are stored in
+ * skb->tstamp. The relation between the different kinds of time
+ * stamps is as follows:
+ *
+ * syststamp and tstamp can be compared against each other in
+ * arbitrary combinations.  The accuracy of a
+ * syststamp/tstamp/"syststamp from other device" comparison is
+ * limited by the accuracy of the transformation into system time
+ * base. This depends on the device driver and its underlying
+ * hardware.
+ *
+ * hwtstamps can only be compared against other hwtstamps from
+ * the same device.
+ *
+ * This structure is attached to packets as part of the
+ * &skb_shared_info. Use skb_hwtstamps() to get a pointer.
+ */
+struct skb_shared_hwtstamps {
+	ktime_t	hwtstamp;
+	ktime_t	syststamp;
+};
+
+/**
+ * struct skb_shared_tx - instructions for time stamping of outgoing packets
+ * @hardware:		generate hardware time stamp
+ * @software:		generate software time stamp
+ * @in_progress:	device driver is going to provide
+ *			hardware time stamp
+ *
+ * These flags are attached to packets as part of the
+ * &skb_shared_info. Use skb_tx() to get a pointer.
+ */
+union skb_shared_tx {
+	struct {
+		__u8	hardware:1,
+			software:1,
+			in_progress:1;
+	};
+	__u8 flags;
+};
+
 /* This data is invariant across clones and lives at
 * the end of the header data, ie. at skb->end.
 */
@ -146,10 +192,12 @@ struct skb_shared_info {
 	unsigned short	gso_segs;
 	unsigned short  gso_type;
 	__be32          ip6_frag_id;
+	union skb_shared_tx tx_flags;
 #ifdef CONFIG_HAS_DMA
 	unsigned int	num_dma_maps;
 #endif
 	struct sk_buff	*frag_list;
+	struct skb_shared_hwtstamps hwtstamps;
 	skb_frag_t	frags[MAX_SKB_FRAGS];
 #ifdef CONFIG_HAS_DMA
 	dma_addr_t	dma_maps[MAX_SKB_FRAGS + 1];
@ -373,6 +421,7 @@ extern void skb_dma_unmap(struct device *dev, struct sk_buff *skb,
 #endif

 extern void kfree_skb(struct sk_buff *skb);
+extern void consume_skb(struct sk_buff *skb);
 extern void	       __kfree_skb(struct sk_buff *skb);
 extern struct sk_buff *__alloc_skb(unsigned int size,
 				   gfp_t priority, int fclone, int node);
@ -411,7 +460,8 @@ extern int	       skb_to_sgvec(struct sk_buff *skb,
 extern int	       skb_cow_data(struct sk_buff *skb, int tailbits,
 				    struct sk_buff **trailer);
 extern int	       skb_pad(struct sk_buff *skb, int pad);
-#define dev_kfree_skb(a)	kfree_skb(a)
+#define dev_kfree_skb(a)	consume_skb(a)
+#define dev_consume_skb(a)	kfree_skb_clean(a)
 extern void	      skb_over_panic(struct sk_buff *skb, int len,
 				     void *here);
 extern void	      skb_under_panic(struct sk_buff *skb, int len,
@ -459,6 +509,16 @@ static inline unsigned char *skb_end_pointer(const struct sk_buff *skb)
 /* Internal */
 #define skb_shinfo(SKB)	((struct skb_shared_info *)(skb_end_pointer(SKB)))

+static inline struct skb_shared_hwtstamps *skb_hwtstamps(struct sk_buff *skb)
+{
+	return &skb_shinfo(skb)->hwtstamps;
+}
+
+static inline union skb_shared_tx *skb_tx(struct sk_buff *skb)
+{
+	return &skb_shinfo(skb)->tx_flags;
+}
+
 /**
 *	skb_queue_empty - check if a queue is empty
 *	@list: queue head
@ -1278,7 +1338,7 @@ static inline int skb_network_offset(const struct sk_buff *skb)
 * The networking layer reserves some headroom in skb data (via
 * dev_alloc_skb). This is used to avoid having to reallocate skb data when
 * the header has to grow. In the default case, if the header has to grow
- * 16 bytes or less we avoid the reallocation.
+ * 32 bytes or less we avoid the reallocation.
 *
 * Unfortunately this headroom changes the DMA alignment of the resulting
 * network packet. As for NET_IP_ALIGN, this unaligned DMA is expensive
@ -1286,11 +1346,11 @@ static inline int skb_network_offset(const struct sk_buff *skb)
 * perhaps setting it to a cacheline in size (since that will maintain
 * cacheline alignment of the DMA). It must be a power of 2.
 *
- * Various parts of the networking layer expect at least 16 bytes of
+ * Various parts of the networking layer expect at least 32 bytes of
 * headroom, you should not reduce this.
 */
 #ifndef NET_SKB_PAD
-#define NET_SKB_PAD	16
+#define NET_SKB_PAD	32
 #endif

 extern int ___pskb_trim(struct sk_buff *skb, unsigned int len);
@ -1678,8 +1738,6 @@ extern int	       skb_shift(struct sk_buff *tgt, struct sk_buff *skb,
 				 int shiftlen);

 extern struct sk_buff *skb_segment(struct sk_buff *skb, int features);
-extern int	       skb_gro_receive(struct sk_buff **head,
-				       struct sk_buff *skb);

 static inline void *skb_header_pointer(const struct sk_buff *skb, int offset,
 				       int len, void *buffer)
@ -1726,6 +1784,11 @@ static inline void skb_copy_to_linear_data_offset(struct sk_buff *skb,

 extern void skb_init(void);

+static inline ktime_t skb_get_ktime(const struct sk_buff *skb)
+{
+	return skb->tstamp;
+}
+
 /**
 *	skb_get_timestamp - get timestamp from a skb
 *	@skb: skb to get stamp from
@ -1735,11 +1798,18 @@ extern void skb_init(void);
 *	This function converts the offset back to a struct timeval and stores
 *	it in stamp.
 */
-static inline void skb_get_timestamp(const struct sk_buff *skb, struct timeval *stamp)
+static inline void skb_get_timestamp(const struct sk_buff *skb,
+				     struct timeval *stamp)
 {
 	*stamp = ktime_to_timeval(skb->tstamp);
 }

+static inline void skb_get_timestampns(const struct sk_buff *skb,
+				       struct timespec *stamp)
+{
+	*stamp = ktime_to_timespec(skb->tstamp);
+}
+
 static inline void __net_timestamp(struct sk_buff *skb)
 {
 	skb->tstamp = ktime_get_real();
@ -1755,6 +1825,20 @@ static inline ktime_t net_invalid_timestamp(void)
 	return ktime_set(0, 0);
 }

+/**
+ * skb_tstamp_tx - queue clone of skb with send time stamps
+ * @orig_skb:	the original outgoing packet
+ * @hwtstamps:	hardware time stamps, may be NULL if not available
+ *
+ * If the skb has a socket associated, then this function clones the
+ * skb (thus sharing the actual data and optional structures), stores
+ * the optional hardware time stamping information (if non NULL) or
+ * generates a software time stamp (otherwise), then queues the clone
+ * to the error queue of the socket.  Errors are silently ignored.
+ */
+extern void skb_tstamp_tx(struct sk_buff *orig_skb,
+			struct skb_shared_hwtstamps *hwtstamps);
+
 extern __sum16 __skb_checksum_complete_head(struct sk_buff *skb, int len);
 extern __sum16 __skb_checksum_complete(struct sk_buff *skb);

@ -1885,7 +1969,7 @@ static inline void skb_set_queue_mapping(struct sk_buff *skb, u16 queue_mapping)
 	skb->queue_mapping = queue_mapping;
 }

-static inline u16 skb_get_queue_mapping(struct sk_buff *skb)
+static inline u16 skb_get_queue_mapping(const struct sk_buff *skb)
 {
 	return skb->queue_mapping;
 }
@ -1895,6 +1979,24 @@ static inline void skb_copy_queue_mapping(struct sk_buff *to, const struct sk_bu
 	to->queue_mapping = from->queue_mapping;
 }

+static inline void skb_record_rx_queue(struct sk_buff *skb, u16 rx_queue)
+{
+	skb->queue_mapping = rx_queue + 1;
+}
+
+static inline u16 skb_get_rx_queue(const struct sk_buff *skb)
+{
+	return skb->queue_mapping - 1;
+}
+
+static inline bool skb_rx_queue_recorded(const struct sk_buff *skb)
+{
+	return (skb->queue_mapping != 0);
+}
+
+extern u16 skb_tx_hash(const struct net_device *dev,
+		       const struct sk_buff *skb);
+
 #ifdef CONFIG_XFRM
 static inline struct sec_path *skb_sec_path(struct sk_buff *skb)
 {
--- a/include/linux/smsc911x.h
+++ b/include/linux/smsc911x.h
@ -43,5 +43,8 @@ struct smsc911x_platform_config {
 /* Constants for flags */
 #define SMSC911X_USE_16BIT 			(BIT(0))
 #define SMSC911X_USE_32BIT 			(BIT(1))
+#define SMSC911X_FORCE_INTERNAL_PHY		(BIT(2))
+#define SMSC911X_FORCE_EXTERNAL_PHY 		(BIT(3))
+#define SMSC911X_SAVE_MAC_ADDRESS		(BIT(4))

 #endif /* __LINUX_SMSC911X_H__ */
--- a/include/linux/socket.h
+++ b/include/linux/socket.h
@ -179,6 +179,7 @@ struct ucred {
 #define AF_ASH		18	/* Ash				*/
 #define AF_ECONET	19	/* Acorn Econet			*/
 #define AF_ATMSVC	20	/* ATM SVCs			*/
+#define AF_RDS		21	/* RDS sockets 			*/
 #define AF_SNA		22	/* Linux SNA Project (nutters!) */
 #define AF_IRDA		23	/* IRDA sockets			*/
 #define AF_PPPOX	24	/* PPPoX sockets		*/
@ -217,6 +218,7 @@ struct ucred {
 #define PF_ASH		AF_ASH
 #define PF_ECONET	AF_ECONET
 #define PF_ATMSVC	AF_ATMSVC
+#define PF_RDS		AF_RDS
 #define PF_SNA		AF_SNA
 #define PF_IRDA		AF_IRDA
 #define PF_PPPOX	AF_PPPOX
@ -298,6 +300,7 @@ struct ucred {
 #define SOL_PPPOL2TP	273
 #define SOL_BLUETOOTH	274
 #define SOL_PNPIPE	275
+#define SOL_RDS		276

 /* IPX options */
 #define IPX_TYPE	1
--- a/include/linux/sockios.h
+++ b/include/linux/sockios.h
@ -122,6 +122,9 @@
 #define SIOCBRADDIF	0x89a2		/* add interface to bridge      */
 #define SIOCBRDELIF	0x89a3		/* remove interface from bridge */

+/* hardware time stamping: parameters in linux/net_tstamp.h */
+#define SIOCSHWTSTAMP   0x89b0
+
 /* Device private ioctl calls */

 /*
--- a/include/linux/spi/libertas_spi.h
+++ b/include/linux/spi/libertas_spi.h
@ -0,0 +1,32 @@
+/*
+ * board-specific data for the libertas_spi driver.
+ *
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#ifndef _LIBERTAS_SPI_H_
+#define _LIBERTAS_SPI_H_
+
+struct spi_device;
+
+struct libertas_spi_platform_data {
+	/* There are two ways to read data from the WLAN module's SPI
+	 * interface. Setting 0 or 1 here controls which one is used.
+	 *
+	 * Usually you want to set use_dummy_writes = 1.
+	 * However, if that doesn't work or if you are using a slow SPI clock
+	 * speed, you may want to use 0 here. */
+	u16 use_dummy_writes;
+
+	/* GPIO number to use as chip select */
+	u16 gpio_cs;
+
+	/* Board specific setup/teardown */
+	int (*setup)(struct spi_device *spi);
+	int (*teardown)(struct spi_device *spi);
+};
+#endif
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@ -339,6 +339,10 @@ extern int ssb_bus_pcmciabus_register(struct ssb_bus *bus,

 extern void ssb_bus_unregister(struct ssb_bus *bus);

+/* Set a fallback SPROM.
+ * See kdoc at the function definition for complete documentation. */
+extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
+
 /* Suspend a SSB bus.
 * Call this from the parent bus suspend routine. */
 extern int ssb_bus_suspend(struct ssb_bus *bus);
--- a/include/linux/ssb/ssb_driver_chipcommon.h
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
@ -181,6 +181,16 @@
 #define SSB_CHIPCO_PROG_WAITCNT		0x0124
 #define SSB_CHIPCO_FLASH_CFG		0x0128
 #define SSB_CHIPCO_FLASH_WAITCNT	0x012C
+#define SSB_CHIPCO_CLKCTLST		0x01E0 /* Clock control and status (rev >= 20) */
+#define  SSB_CHIPCO_CLKCTLST_FORCEALP	0x00000001 /* Force ALP request */
+#define  SSB_CHIPCO_CLKCTLST_FORCEHT	0x00000002 /* Force HT request */
+#define  SSB_CHIPCO_CLKCTLST_FORCEILP	0x00000004 /* Force ILP request */
+#define  SSB_CHIPCO_CLKCTLST_HAVEALPREQ	0x00000008 /* ALP available request */
+#define  SSB_CHIPCO_CLKCTLST_HAVEHTREQ	0x00000010 /* HT available request */
+#define  SSB_CHIPCO_CLKCTLST_HWCROFF	0x00000020 /* Force HW clock request off */
+#define  SSB_CHIPCO_CLKCTLST_HAVEHT	0x00010000 /* HT available */
+#define  SSB_CHIPCO_CLKCTLST_HAVEALP	0x00020000 /* APL available */
+#define SSB_CHIPCO_HW_WORKAROUND	0x01E4 /* Hardware workaround (rev >= 20) */
 #define SSB_CHIPCO_UART0_DATA		0x0300
 #define SSB_CHIPCO_UART0_IMR		0x0304
 #define SSB_CHIPCO_UART0_FCR		0x0308
@ -197,6 +207,196 @@
 #define SSB_CHIPCO_UART1_LSR		0x0414
 #define SSB_CHIPCO_UART1_MSR		0x0418
 #define SSB_CHIPCO_UART1_SCRATCH	0x041C
+/* PMU registers (rev >= 20) */
+#define SSB_CHIPCO_PMU_CTL			0x0600 /* PMU control */
+#define  SSB_CHIPCO_PMU_CTL_ILP_DIV		0xFFFF0000 /* ILP div mask */
+#define  SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT	16
+#define  SSB_CHIPCO_PMU_CTL_NOILPONW		0x00000200 /* No ILP on wait */
+#define  SSB_CHIPCO_PMU_CTL_HTREQEN		0x00000100 /* HT req enable */
+#define  SSB_CHIPCO_PMU_CTL_ALPREQEN		0x00000080 /* ALP req enable */
+#define  SSB_CHIPCO_PMU_CTL_XTALFREQ		0x0000007C /* Crystal freq */
+#define  SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT	2
+#define  SSB_CHIPCO_PMU_CTL_ILPDIVEN		0x00000002 /* ILP div enable */
+#define  SSB_CHIPCO_PMU_CTL_LPOSEL		0x00000001 /* LPO sel */
+#define SSB_CHIPCO_PMU_CAP			0x0604 /* PMU capabilities */
+#define  SSB_CHIPCO_PMU_CAP_REVISION		0x000000FF /* Revision mask */
+#define SSB_CHIPCO_PMU_STAT			0x0608 /* PMU status */
+#define  SSB_CHIPCO_PMU_STAT_INTPEND		0x00000040 /* Interrupt pending */
+#define  SSB_CHIPCO_PMU_STAT_SBCLKST		0x00000030 /* Backplane clock status? */
+#define  SSB_CHIPCO_PMU_STAT_HAVEALP		0x00000008 /* ALP available */
+#define  SSB_CHIPCO_PMU_STAT_HAVEHT		0x00000004 /* HT available */
+#define  SSB_CHIPCO_PMU_STAT_RESINIT		0x00000003 /* Res init */
+#define SSB_CHIPCO_PMU_RES_STAT			0x060C /* PMU res status */
+#define SSB_CHIPCO_PMU_RES_PEND			0x0610 /* PMU res pending */
+#define SSB_CHIPCO_PMU_TIMER			0x0614 /* PMU timer */
+#define SSB_CHIPCO_PMU_MINRES_MSK		0x0618 /* PMU min res mask */
+#define SSB_CHIPCO_PMU_MAXRES_MSK		0x061C /* PMU max res mask */
+#define SSB_CHIPCO_PMU_RES_TABSEL		0x0620 /* PMU res table sel */
+#define SSB_CHIPCO_PMU_RES_DEPMSK		0x0624 /* PMU res dep mask */
+#define SSB_CHIPCO_PMU_RES_UPDNTM		0x0628 /* PMU res updown timer */
+#define SSB_CHIPCO_PMU_RES_TIMER		0x062C /* PMU res timer */
+#define SSB_CHIPCO_PMU_CLKSTRETCH		0x0630 /* PMU clockstretch */
+#define SSB_CHIPCO_PMU_WATCHDOG			0x0634 /* PMU watchdog */
+#define SSB_CHIPCO_PMU_RES_REQTS		0x0640 /* PMU res req timer sel */
+#define SSB_CHIPCO_PMU_RES_REQT			0x0644 /* PMU res req timer */
+#define SSB_CHIPCO_PMU_RES_REQM			0x0648 /* PMU res req mask */
+#define SSB_CHIPCO_CHIPCTL_ADDR			0x0650
+#define SSB_CHIPCO_CHIPCTL_DATA			0x0654
+#define SSB_CHIPCO_REGCTL_ADDR			0x0658
+#define SSB_CHIPCO_REGCTL_DATA			0x065C
+#define SSB_CHIPCO_PLLCTL_ADDR			0x0660
+#define SSB_CHIPCO_PLLCTL_DATA			0x0664
+
+
+
+/** PMU PLL registers */
+
+/* PMU rev 0 PLL registers */
+#define SSB_PMU0_PLLCTL0			0
+#define  SSB_PMU0_PLLCTL0_PDIV_MSK		0x00000001
+#define  SSB_PMU0_PLLCTL0_PDIV_FREQ		25000 /* kHz */
+#define SSB_PMU0_PLLCTL1			1
+#define  SSB_PMU0_PLLCTL1_WILD_IMSK		0xF0000000 /* Wild int mask (low nibble) */
+#define  SSB_PMU0_PLLCTL1_WILD_IMSK_SHIFT	28
+#define  SSB_PMU0_PLLCTL1_WILD_FMSK		0x0FFFFF00 /* Wild frac mask */
+#define  SSB_PMU0_PLLCTL1_WILD_FMSK_SHIFT	8
+#define  SSB_PMU0_PLLCTL1_STOPMOD		0x00000040 /* Stop mod */
+#define SSB_PMU0_PLLCTL2			2
+#define  SSB_PMU0_PLLCTL2_WILD_IMSKHI		0x0000000F /* Wild int mask (high nibble) */
+#define  SSB_PMU0_PLLCTL2_WILD_IMSKHI_SHIFT	0
+
+/* PMU rev 1 PLL registers */
+#define SSB_PMU1_PLLCTL0			0
+#define  SSB_PMU1_PLLCTL0_P1DIV			0x00F00000 /* P1 div */
+#define  SSB_PMU1_PLLCTL0_P1DIV_SHIFT		20
+#define  SSB_PMU1_PLLCTL0_P2DIV			0x0F000000 /* P2 div */
+#define  SSB_PMU1_PLLCTL0_P2DIV_SHIFT		24
+#define SSB_PMU1_PLLCTL1			1
+#define  SSB_PMU1_PLLCTL1_M1DIV			0x000000FF /* M1 div */
+#define  SSB_PMU1_PLLCTL1_M1DIV_SHIFT		0
+#define  SSB_PMU1_PLLCTL1_M2DIV			0x0000FF00 /* M2 div */
+#define  SSB_PMU1_PLLCTL1_M2DIV_SHIFT		8
+#define  SSB_PMU1_PLLCTL1_M3DIV			0x00FF0000 /* M3 div */
+#define  SSB_PMU1_PLLCTL1_M3DIV_SHIFT		16
+#define  SSB_PMU1_PLLCTL1_M4DIV			0xFF000000 /* M4 div */
+#define  SSB_PMU1_PLLCTL1_M4DIV_SHIFT		24
+#define SSB_PMU1_PLLCTL2			2
+#define  SSB_PMU1_PLLCTL2_M5DIV			0x000000FF /* M5 div */
+#define  SSB_PMU1_PLLCTL2_M5DIV_SHIFT		0
+#define  SSB_PMU1_PLLCTL2_M6DIV			0x0000FF00 /* M6 div */
+#define  SSB_PMU1_PLLCTL2_M6DIV_SHIFT		8
+#define  SSB_PMU1_PLLCTL2_NDIVMODE		0x000E0000 /* NDIV mode */
+#define  SSB_PMU1_PLLCTL2_NDIVMODE_SHIFT	17
+#define  SSB_PMU1_PLLCTL2_NDIVINT		0x1FF00000 /* NDIV int */
+#define  SSB_PMU1_PLLCTL2_NDIVINT_SHIFT		20
+#define SSB_PMU1_PLLCTL3			3
+#define  SSB_PMU1_PLLCTL3_NDIVFRAC		0x00FFFFFF /* NDIV frac */
+#define  SSB_PMU1_PLLCTL3_NDIVFRAC_SHIFT	0
+#define SSB_PMU1_PLLCTL4			4
+#define SSB_PMU1_PLLCTL5			5
+#define  SSB_PMU1_PLLCTL5_CLKDRV		0xFFFFFF00 /* clk drv */
+#define  SSB_PMU1_PLLCTL5_CLKDRV_SHIFT		8
+
+/* BCM4312 PLL resource numbers. */
+#define SSB_PMURES_4312_SWITCHER_BURST		0
+#define SSB_PMURES_4312_SWITCHER_PWM    	1
+#define SSB_PMURES_4312_PA_REF_LDO		2
+#define SSB_PMURES_4312_CORE_LDO_BURST		3
+#define SSB_PMURES_4312_CORE_LDO_PWM		4
+#define SSB_PMURES_4312_RADIO_LDO		5
+#define SSB_PMURES_4312_ILP_REQUEST		6
+#define SSB_PMURES_4312_BG_FILTBYP		7
+#define SSB_PMURES_4312_TX_FILTBYP		8
+#define SSB_PMURES_4312_RX_FILTBYP		9
+#define SSB_PMURES_4312_XTAL_PU			10
+#define SSB_PMURES_4312_ALP_AVAIL		11
+#define SSB_PMURES_4312_BB_PLL_FILTBYP		12
+#define SSB_PMURES_4312_RF_PLL_FILTBYP		13
+#define SSB_PMURES_4312_HT_AVAIL		14
+
+/* BCM4325 PLL resource numbers. */
+#define SSB_PMURES_4325_BUCK_BOOST_BURST	0
+#define SSB_PMURES_4325_CBUCK_BURST		1
+#define SSB_PMURES_4325_CBUCK_PWM		2
+#define SSB_PMURES_4325_CLDO_CBUCK_BURST	3
+#define SSB_PMURES_4325_CLDO_CBUCK_PWM		4
+#define SSB_PMURES_4325_BUCK_BOOST_PWM		5
+#define SSB_PMURES_4325_ILP_REQUEST		6
+#define SSB_PMURES_4325_ABUCK_BURST		7
+#define SSB_PMURES_4325_ABUCK_PWM		8
+#define SSB_PMURES_4325_LNLDO1_PU		9
+#define SSB_PMURES_4325_LNLDO2_PU		10
+#define SSB_PMURES_4325_LNLDO3_PU		11
+#define SSB_PMURES_4325_LNLDO4_PU		12
+#define SSB_PMURES_4325_XTAL_PU			13
+#define SSB_PMURES_4325_ALP_AVAIL		14
+#define SSB_PMURES_4325_RX_PWRSW_PU		15
+#define SSB_PMURES_4325_TX_PWRSW_PU		16
+#define SSB_PMURES_4325_RFPLL_PWRSW_PU		17
+#define SSB_PMURES_4325_LOGEN_PWRSW_PU		18
+#define SSB_PMURES_4325_AFE_PWRSW_PU		19
+#define SSB_PMURES_4325_BBPLL_PWRSW_PU		20
+#define SSB_PMURES_4325_HT_AVAIL		21
+
+/* BCM4328 PLL resource numbers. */
+#define SSB_PMURES_4328_EXT_SWITCHER_PWM	0
+#define SSB_PMURES_4328_BB_SWITCHER_PWM		1
+#define SSB_PMURES_4328_BB_SWITCHER_BURST	2
+#define SSB_PMURES_4328_BB_EXT_SWITCHER_BURST	3
+#define SSB_PMURES_4328_ILP_REQUEST		4
+#define SSB_PMURES_4328_RADIO_SWITCHER_PWM	5
+#define SSB_PMURES_4328_RADIO_SWITCHER_BURST	6
+#define SSB_PMURES_4328_ROM_SWITCH		7
+#define SSB_PMURES_4328_PA_REF_LDO		8
+#define SSB_PMURES_4328_RADIO_LDO		9
+#define SSB_PMURES_4328_AFE_LDO			10
+#define SSB_PMURES_4328_PLL_LDO			11
+#define SSB_PMURES_4328_BG_FILTBYP		12
+#define SSB_PMURES_4328_TX_FILTBYP		13
+#define SSB_PMURES_4328_RX_FILTBYP		14
+#define SSB_PMURES_4328_XTAL_PU			15
+#define SSB_PMURES_4328_XTAL_EN			16
+#define SSB_PMURES_4328_BB_PLL_FILTBYP		17
+#define SSB_PMURES_4328_RF_PLL_FILTBYP		18
+#define SSB_PMURES_4328_BB_PLL_PU		19
+
+/* BCM5354 PLL resource numbers. */
+#define SSB_PMURES_5354_EXT_SWITCHER_PWM	0
+#define SSB_PMURES_5354_BB_SWITCHER_PWM		1
+#define SSB_PMURES_5354_BB_SWITCHER_BURST	2
+#define SSB_PMURES_5354_BB_EXT_SWITCHER_BURST	3
+#define SSB_PMURES_5354_ILP_REQUEST		4
+#define SSB_PMURES_5354_RADIO_SWITCHER_PWM	5
+#define SSB_PMURES_5354_RADIO_SWITCHER_BURST	6
+#define SSB_PMURES_5354_ROM_SWITCH		7
+#define SSB_PMURES_5354_PA_REF_LDO		8
+#define SSB_PMURES_5354_RADIO_LDO		9
+#define SSB_PMURES_5354_AFE_LDO			10
+#define SSB_PMURES_5354_PLL_LDO			11
+#define SSB_PMURES_5354_BG_FILTBYP		12
+#define SSB_PMURES_5354_TX_FILTBYP		13
+#define SSB_PMURES_5354_RX_FILTBYP		14
+#define SSB_PMURES_5354_XTAL_PU			15
+#define SSB_PMURES_5354_XTAL_EN			16
+#define SSB_PMURES_5354_BB_PLL_FILTBYP		17
+#define SSB_PMURES_5354_RF_PLL_FILTBYP		18
+#define SSB_PMURES_5354_BB_PLL_PU		19
+
+
+
+/** Chip specific Chip-Status register contents. */
+#define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL	0x00000003
+#define SSB_CHIPCO_CHST_4325_DEFCIS_SEL		0 /* OTP is powered up, use def. CIS, no SPROM */
+#define SSB_CHIPCO_CHST_4325_SPROM_SEL		1 /* OTP is powered up, SPROM is present */
+#define SSB_CHIPCO_CHST_4325_OTP_SEL		2 /* OTP is powered up, no SPROM */
+#define SSB_CHIPCO_CHST_4325_OTP_PWRDN		3 /* OTP is powered down, SPROM is present */
+#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE	0x00000004
+#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE_SHIFT  2
+#define SSB_CHIPCO_CHST_4325_RCAL_VALID		0x00000008
+#define SSB_CHIPCO_CHST_4325_RCAL_VALID_SHIFT	3
+#define SSB_CHIPCO_CHST_4325_RCAL_VALUE		0x000001F0
+#define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT	4
+#define SSB_CHIPCO_CHST_4325_PMUTOP_2B 		0x00000200 /* 1 for 2b, 0 for to 2a */



@ -353,11 +553,20 @@
 struct ssb_device;
 struct ssb_serial_port;

+/* Data for the PMU, if available.
+ * Check availability with ((struct ssb_chipcommon)->capabilities & SSB_CHIPCO_CAP_PMU)
+ */
+struct ssb_chipcommon_pmu {
+	u8 rev;			/* PMU revision */
+	u32 crystalfreq;	/* The active crystal frequency (in kHz) */
+};
+
 struct ssb_chipcommon {
 	struct ssb_device *dev;
 	u32 capabilities;
 	/* Fast Powerup Delay constant */
 	u16 fast_pwrup_delay;
+	struct ssb_chipcommon_pmu pmu;
 };

 static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
@ -365,6 +574,17 @@ static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
 	return (cc->dev != NULL);
 }

+/* Register access */
+#define chipco_read32(cc, offset)	ssb_read32((cc)->dev, offset)
+#define chipco_write32(cc, offset, val)	ssb_write32((cc)->dev, offset, val)
+
+#define chipco_mask32(cc, offset, mask) \
+		chipco_write32(cc, offset, chipco_read32(cc, offset) & (mask))
+#define chipco_set32(cc, offset, set) \
+		chipco_write32(cc, offset, chipco_read32(cc, offset) | (set))
+#define chipco_maskset32(cc, offset, mask, set) \
+		chipco_write32(cc, offset, (chipco_read32(cc, offset) & (mask)) | (set))
+
 extern void ssb_chipcommon_init(struct ssb_chipcommon *cc);

 extern void ssb_chipco_suspend(struct ssb_chipcommon *cc);
@ -406,4 +626,8 @@ extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
 				  struct ssb_serial_port *ports);
 #endif /* CONFIG_SSB_SERIAL */

+/* PMU support */
+extern void ssb_pmu_init(struct ssb_chipcommon *cc);
+
+
 #endif /* LINUX_SSB_CHIPCO_H_ */
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@ -326,6 +326,42 @@
 #define  SSB_SPROM5_GPIOB_P3		0xFF00	/* Pin 3 */
 #define  SSB_SPROM5_GPIOB_P3_SHIFT	8

+/* SPROM Revision 8 */
+#define SSB_SPROM8_BFLLO		0x1084	/* Boardflags (low 16 bits) */
+#define SSB_SPROM8_BFLHI		0x1086	/* Boardflags Hi */
+#define SSB_SPROM8_IL0MAC		0x108C	/* 6 byte MAC address */
+#define SSB_SPROM8_CCODE		0x1092	/* 2 byte country code */
+#define SSB_SPROM8_ANTAVAIL		0x109C  /* Antenna available bitfields*/
+#define SSB_SPROM8_ANTAVAIL_A		0xFF00	/* A-PHY bitfield */
+#define SSB_SPROM8_ANTAVAIL_A_SHIFT	8
+#define SSB_SPROM8_ANTAVAIL_BG		0x00FF	/* B-PHY and G-PHY bitfield */
+#define SSB_SPROM8_ANTAVAIL_BG_SHIFT	0
+#define SSB_SPROM8_AGAIN01		0x109E	/* Antenna Gain (in dBm Q5.2) */
+#define  SSB_SPROM8_AGAIN0		0x00FF	/* Antenna 0 */
+#define  SSB_SPROM8_AGAIN0_SHIFT	0
+#define  SSB_SPROM8_AGAIN1		0xFF00	/* Antenna 1 */
+#define  SSB_SPROM8_AGAIN1_SHIFT	8
+#define SSB_SPROM8_AGAIN23		0x10A0
+#define  SSB_SPROM8_AGAIN2		0x00FF	/* Antenna 2 */
+#define  SSB_SPROM8_AGAIN2_SHIFT	0
+#define  SSB_SPROM8_AGAIN3		0xFF00	/* Antenna 3 */
+#define  SSB_SPROM8_AGAIN3_SHIFT	8
+#define SSB_SPROM8_GPIOA		0x1096	/*Gen. Purpose IO # 0 and 1 */
+#define  SSB_SPROM8_GPIOA_P0		0x00FF	/* Pin 0 */
+#define  SSB_SPROM8_GPIOA_P1		0xFF00	/* Pin 1 */
+#define  SSB_SPROM8_GPIOA_P1_SHIFT	8
+#define SSB_SPROM8_GPIOB		0x1098	/* Gen. Purpose IO # 2 and 3 */
+#define  SSB_SPROM8_GPIOB_P2		0x00FF	/* Pin 2 */
+#define  SSB_SPROM8_GPIOB_P3		0xFF00	/* Pin 3 */
+#define  SSB_SPROM8_GPIOB_P3_SHIFT	8
+#define SSB_SPROM8_MAXP_BG		0x10C0  /* Max Power BG in path 1 */
+#define  SSB_SPROM8_MAXP_BG_MASK	0x00FF  /* Mask for Max Power BG */
+#define  SSB_SPROM8_ITSSI_BG		0xFF00	/* Mask for path 1 itssi_bg */
+#define  SSB_SPROM8_ITSSI_BG_SHIFT	8
+#define SSB_SPROM8_MAXP_A		0x10C8  /* Max Power A in path 1 */
+#define  SSB_SPROM8_MAXP_A_MASK		0x00FF  /* Mask for Max Power A */
+#define  SSB_SPROM8_ITSSI_A		0xFF00	/* Mask for path 1 itssi_a */
+#define  SSB_SPROM8_ITSSI_A_SHIFT	8

 /* Values for SSB_SPROM1_BINF_CCODE */
 enum {
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@ -490,6 +490,7 @@ enum
 	NET_IPV4_CONF_ARP_IGNORE=19,
 	NET_IPV4_CONF_PROMOTE_SECONDARIES=20,
 	NET_IPV4_CONF_ARP_ACCEPT=21,
+	NET_IPV4_CONF_ARP_NOTIFY=22,
 	__NET_IPV4_CONF_MAX
 };

--- a/include/linux/tcp.h
+++ b/include/linux/tcp.h
@ -69,16 +69,16 @@ union tcp_word_hdr {
 #define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3]) 

 enum { 
-	TCP_FLAG_CWR = __constant_htonl(0x00800000), 
-	TCP_FLAG_ECE = __constant_htonl(0x00400000), 
-	TCP_FLAG_URG = __constant_htonl(0x00200000), 
-	TCP_FLAG_ACK = __constant_htonl(0x00100000), 
-	TCP_FLAG_PSH = __constant_htonl(0x00080000), 
-	TCP_FLAG_RST = __constant_htonl(0x00040000), 
-	TCP_FLAG_SYN = __constant_htonl(0x00020000), 
-	TCP_FLAG_FIN = __constant_htonl(0x00010000),
-	TCP_RESERVED_BITS = __constant_htonl(0x0F000000),
-	TCP_DATA_OFFSET = __constant_htonl(0xF0000000)
+	TCP_FLAG_CWR = __cpu_to_be32(0x00800000),
+	TCP_FLAG_ECE = __cpu_to_be32(0x00400000),
+	TCP_FLAG_URG = __cpu_to_be32(0x00200000),
+	TCP_FLAG_ACK = __cpu_to_be32(0x00100000),
+	TCP_FLAG_PSH = __cpu_to_be32(0x00080000),
+	TCP_FLAG_RST = __cpu_to_be32(0x00040000),
+	TCP_FLAG_SYN = __cpu_to_be32(0x00020000),
+	TCP_FLAG_FIN = __cpu_to_be32(0x00010000),
+	TCP_RESERVED_BITS = __cpu_to_be32(0x0F000000),
+	TCP_DATA_OFFSET = __cpu_to_be32(0xF0000000)
 }; 

 /* TCP socket options */
@ -218,7 +218,6 @@ struct tcp_options_received {
 		snd_wscale : 4,	/* Window scaling received from sender	*/
 		rcv_wscale : 4;	/* Window scaling to send to receiver	*/
 /*	SACKs data	*/
-	u8	eff_sacks;	/* Size of SACK array to send with next packet */
 	u8	num_sacks;	/* Number of SACK blocks		*/
 	u16	user_mss;  	/* mss requested by user in ioctl */
 	u16	mss_clamp;	/* Maximal mss, negotiated at connection setup */
@ -249,7 +248,7 @@ struct tcp_sock {
 	/* inet_connection_sock has to be the first member of tcp_sock */
 	struct inet_connection_sock	inet_conn;
 	u16	tcp_header_len;	/* Bytes of tcp header to send		*/
-	u16	xmit_size_goal;	/* Goal for segmenting output packets	*/
+	u16	xmit_size_goal_segs; /* Goal for segmenting output packets */

 /*
 *	Header prediction flags
--- a/include/linux/timecompare.h
+++ b/include/linux/timecompare.h
@ -0,0 +1,125 @@
+/*
+ * Utility code which helps transforming between two different time
+ * bases, called "source" and "target" time in this code.
+ *
+ * Source time has to be provided via the timecounter API while target
+ * time is accessed via a function callback whose prototype
+ * intentionally matches ktime_get() and ktime_get_real(). These
+ * interfaces where chosen like this so that the code serves its
+ * initial purpose without additional glue code.
+ *
+ * This purpose is synchronizing a hardware clock in a NIC with system
+ * time, in order to implement the Precision Time Protocol (PTP,
+ * IEEE1588) with more accurate hardware assisted time stamping.  In
+ * that context only synchronization against system time (=
+ * ktime_get_real()) is currently needed. But this utility code might
+ * become useful in other situations, which is why it was written as
+ * general purpose utility code.
+ *
+ * The source timecounter is assumed to return monotonically
+ * increasing time (but this code does its best to compensate if that
+ * is not the case) whereas target time may jump.
+ *
+ * The target time corresponding to a source time is determined by
+ * reading target time, reading source time, reading target time
+ * again, then assuming that average target time corresponds to source
+ * time. In other words, the assumption is that reading the source
+ * time is slow and involves equal time for sending the request and
+ * receiving the reply, whereas reading target time is assumed to be
+ * fast.
+ *
+ * Copyright (C) 2009 Intel Corporation.
+ * Author: Patrick Ohly <patrick.ohly@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef _LINUX_TIMECOMPARE_H
+#define _LINUX_TIMECOMPARE_H
+
+#include <linux/clocksource.h>
+#include <linux/ktime.h>
+
+/**
+ * struct timecompare - stores state and configuration for the two clocks
+ *
+ * Initialize to zero, then set source/target/num_samples.
+ *
+ * Transformation between source time and target time is done with:
+ * target_time = source_time + offset +
+ *               (source_time - last_update) * skew /
+ *               TIMECOMPARE_SKEW_RESOLUTION
+ *
+ * @source:          used to get source time stamps via timecounter_read()
+ * @target:          function returning target time (for example, ktime_get
+ *                   for monotonic time, or ktime_get_real for wall clock)
+ * @num_samples:     number of times that source time and target time are to
+ *                   be compared when determining their offset
+ * @offset:          (target time - source time) at the time of the last update
+ * @skew:            average (target time - source time) / delta source time *
+ *                   TIMECOMPARE_SKEW_RESOLUTION
+ * @last_update:     last source time stamp when time offset was measured
+ */
+struct timecompare {
+	struct timecounter *source;
+	ktime_t (*target)(void);
+	int num_samples;
+
+	s64 offset;
+	s64 skew;
+	u64 last_update;
+};
+
+/**
+ * timecompare_transform - transform source time stamp into target time base
+ * @sync:            context for time sync
+ * @source_tstamp:   the result of timecounter_read() or
+ *                   timecounter_cyc2time()
+ */
+extern ktime_t timecompare_transform(struct timecompare *sync,
+				     u64 source_tstamp);
+
+/**
+ * timecompare_offset - measure current (target time - source time) offset
+ * @sync:            context for time sync
+ * @offset:          average offset during sample period returned here
+ * @source_tstamp:   average source time during sample period returned here
+ *
+ * Returns number of samples used. Might be zero (= no result) in the
+ * unlikely case that target time was monotonically decreasing for all
+ * samples (= broken).
+ */
+extern int timecompare_offset(struct timecompare *sync,
+			      s64 *offset,
+			      u64 *source_tstamp);
+
+extern void __timecompare_update(struct timecompare *sync,
+				 u64 source_tstamp);
+
+/**
+ * timecompare_update - update offset and skew by measuring current offset
+ * @sync:            context for time sync
+ * @source_tstamp:   the result of timecounter_read() or
+ *                   timecounter_cyc2time(), pass zero to force update
+ *
+ * Updates are only done at most once per second.
+ */
+static inline void timecompare_update(struct timecompare *sync,
+				      u64 source_tstamp)
+{
+	if (!source_tstamp ||
+	    (s64)(source_tstamp - sync->last_update) >= NSEC_PER_SEC)
+		__timecompare_update(sync, source_tstamp);
+}
+
+#endif /* _LINUX_TIMECOMPARE_H */
--- a/include/linux/usb/rndis_host.h
+++ b/include/linux/usb/rndis_host.h
@ -49,48 +49,45 @@ struct rndis_msg_hdr {
 */
 #define	RNDIS_CONTROL_TIMEOUT_MS	(5 * 1000)

-
-#define ccpu2 __constant_cpu_to_le32
-
-#define RNDIS_MSG_COMPLETION	ccpu2(0x80000000)
+#define RNDIS_MSG_COMPLETION	cpu_to_le32(0x80000000)

 /* codes for "msg_type" field of rndis messages;
 * only the data channel uses packet messages (maybe batched);
 * everything else goes on the control channel.
 */
-#define RNDIS_MSG_PACKET	ccpu2(0x00000001)	/* 1-N packets */
-#define RNDIS_MSG_INIT		ccpu2(0x00000002)
+#define RNDIS_MSG_PACKET	cpu_to_le32(0x00000001)	/* 1-N packets */
+#define RNDIS_MSG_INIT		cpu_to_le32(0x00000002)
 #define RNDIS_MSG_INIT_C	(RNDIS_MSG_INIT|RNDIS_MSG_COMPLETION)
-#define RNDIS_MSG_HALT		ccpu2(0x00000003)
-#define RNDIS_MSG_QUERY		ccpu2(0x00000004)
+#define RNDIS_MSG_HALT		cpu_to_le32(0x00000003)
+#define RNDIS_MSG_QUERY		cpu_to_le32(0x00000004)
 #define RNDIS_MSG_QUERY_C	(RNDIS_MSG_QUERY|RNDIS_MSG_COMPLETION)
-#define RNDIS_MSG_SET		ccpu2(0x00000005)
+#define RNDIS_MSG_SET		cpu_to_le32(0x00000005)
 #define RNDIS_MSG_SET_C		(RNDIS_MSG_SET|RNDIS_MSG_COMPLETION)
-#define RNDIS_MSG_RESET		ccpu2(0x00000006)
+#define RNDIS_MSG_RESET		cpu_to_le32(0x00000006)
 #define RNDIS_MSG_RESET_C	(RNDIS_MSG_RESET|RNDIS_MSG_COMPLETION)
-#define RNDIS_MSG_INDICATE	ccpu2(0x00000007)
-#define RNDIS_MSG_KEEPALIVE	ccpu2(0x00000008)
+#define RNDIS_MSG_INDICATE	cpu_to_le32(0x00000007)
+#define RNDIS_MSG_KEEPALIVE	cpu_to_le32(0x00000008)
 #define RNDIS_MSG_KEEPALIVE_C	(RNDIS_MSG_KEEPALIVE|RNDIS_MSG_COMPLETION)

 /* codes for "status" field of completion messages */
-#define	RNDIS_STATUS_SUCCESS		ccpu2(0x00000000)
-#define	RNDIS_STATUS_FAILURE		ccpu2(0xc0000001)
-#define	RNDIS_STATUS_INVALID_DATA	ccpu2(0xc0010015)
-#define	RNDIS_STATUS_NOT_SUPPORTED	ccpu2(0xc00000bb)
-#define	RNDIS_STATUS_MEDIA_CONNECT	ccpu2(0x4001000b)
-#define	RNDIS_STATUS_MEDIA_DISCONNECT	ccpu2(0x4001000c)
+#define	RNDIS_STATUS_SUCCESS		cpu_to_le32(0x00000000)
+#define	RNDIS_STATUS_FAILURE		cpu_to_le32(0xc0000001)
+#define	RNDIS_STATUS_INVALID_DATA	cpu_to_le32(0xc0010015)
+#define	RNDIS_STATUS_NOT_SUPPORTED	cpu_to_le32(0xc00000bb)
+#define	RNDIS_STATUS_MEDIA_CONNECT	cpu_to_le32(0x4001000b)
+#define	RNDIS_STATUS_MEDIA_DISCONNECT	cpu_to_le32(0x4001000c)

 /* codes for OID_GEN_PHYSICAL_MEDIUM */
-#define	RNDIS_PHYSICAL_MEDIUM_UNSPECIFIED	ccpu2(0x00000000)
-#define	RNDIS_PHYSICAL_MEDIUM_WIRELESS_LAN	ccpu2(0x00000001)
-#define	RNDIS_PHYSICAL_MEDIUM_CABLE_MODEM	ccpu2(0x00000002)
-#define	RNDIS_PHYSICAL_MEDIUM_PHONE_LINE	ccpu2(0x00000003)
-#define	RNDIS_PHYSICAL_MEDIUM_POWER_LINE	ccpu2(0x00000004)
-#define	RNDIS_PHYSICAL_MEDIUM_DSL		ccpu2(0x00000005)
-#define	RNDIS_PHYSICAL_MEDIUM_FIBRE_CHANNEL	ccpu2(0x00000006)
-#define	RNDIS_PHYSICAL_MEDIUM_1394		ccpu2(0x00000007)
-#define	RNDIS_PHYSICAL_MEDIUM_WIRELESS_WAN	ccpu2(0x00000008)
-#define	RNDIS_PHYSICAL_MEDIUM_MAX		ccpu2(0x00000009)
+#define	RNDIS_PHYSICAL_MEDIUM_UNSPECIFIED	cpu_to_le32(0x00000000)
+#define	RNDIS_PHYSICAL_MEDIUM_WIRELESS_LAN	cpu_to_le32(0x00000001)
+#define	RNDIS_PHYSICAL_MEDIUM_CABLE_MODEM	cpu_to_le32(0x00000002)
+#define	RNDIS_PHYSICAL_MEDIUM_PHONE_LINE	cpu_to_le32(0x00000003)
+#define	RNDIS_PHYSICAL_MEDIUM_POWER_LINE	cpu_to_le32(0x00000004)
+#define	RNDIS_PHYSICAL_MEDIUM_DSL		cpu_to_le32(0x00000005)
+#define	RNDIS_PHYSICAL_MEDIUM_FIBRE_CHANNEL	cpu_to_le32(0x00000006)
+#define	RNDIS_PHYSICAL_MEDIUM_1394		cpu_to_le32(0x00000007)
+#define	RNDIS_PHYSICAL_MEDIUM_WIRELESS_WAN	cpu_to_le32(0x00000008)
+#define	RNDIS_PHYSICAL_MEDIUM_MAX		cpu_to_le32(0x00000009)

 struct rndis_data_hdr {
 	__le32	msg_type;		/* RNDIS_MSG_PACKET */
@ -228,24 +225,24 @@ struct rndis_keepalive_c {	/* IN (optionally OUT) */
 * there are gobs more that may optionally be supported.  We'll avoid as much
 * of that mess as possible.
 */
-#define OID_802_3_PERMANENT_ADDRESS	ccpu2(0x01010101)
-#define OID_GEN_MAXIMUM_FRAME_SIZE	ccpu2(0x00010106)
-#define OID_GEN_CURRENT_PACKET_FILTER	ccpu2(0x0001010e)
-#define OID_GEN_PHYSICAL_MEDIUM		ccpu2(0x00010202)
+#define OID_802_3_PERMANENT_ADDRESS	cpu_to_le32(0x01010101)
+#define OID_GEN_MAXIMUM_FRAME_SIZE	cpu_to_le32(0x00010106)
+#define OID_GEN_CURRENT_PACKET_FILTER	cpu_to_le32(0x0001010e)
+#define OID_GEN_PHYSICAL_MEDIUM		cpu_to_le32(0x00010202)

 /* packet filter bits used by OID_GEN_CURRENT_PACKET_FILTER */
-#define RNDIS_PACKET_TYPE_DIRECTED		ccpu2(0x00000001)
-#define RNDIS_PACKET_TYPE_MULTICAST		ccpu2(0x00000002)
-#define RNDIS_PACKET_TYPE_ALL_MULTICAST		ccpu2(0x00000004)
-#define RNDIS_PACKET_TYPE_BROADCAST		ccpu2(0x00000008)
-#define RNDIS_PACKET_TYPE_SOURCE_ROUTING	ccpu2(0x00000010)
-#define RNDIS_PACKET_TYPE_PROMISCUOUS		ccpu2(0x00000020)
-#define RNDIS_PACKET_TYPE_SMT			ccpu2(0x00000040)
-#define RNDIS_PACKET_TYPE_ALL_LOCAL		ccpu2(0x00000080)
-#define RNDIS_PACKET_TYPE_GROUP			ccpu2(0x00001000)
-#define RNDIS_PACKET_TYPE_ALL_FUNCTIONAL	ccpu2(0x00002000)
-#define RNDIS_PACKET_TYPE_FUNCTIONAL		ccpu2(0x00004000)
-#define RNDIS_PACKET_TYPE_MAC_FRAME		ccpu2(0x00008000)
+#define RNDIS_PACKET_TYPE_DIRECTED		cpu_to_le32(0x00000001)
+#define RNDIS_PACKET_TYPE_MULTICAST		cpu_to_le32(0x00000002)
+#define RNDIS_PACKET_TYPE_ALL_MULTICAST		cpu_to_le32(0x00000004)
+#define RNDIS_PACKET_TYPE_BROADCAST		cpu_to_le32(0x00000008)
+#define RNDIS_PACKET_TYPE_SOURCE_ROUTING	cpu_to_le32(0x00000010)
+#define RNDIS_PACKET_TYPE_PROMISCUOUS		cpu_to_le32(0x00000020)
+#define RNDIS_PACKET_TYPE_SMT			cpu_to_le32(0x00000040)
+#define RNDIS_PACKET_TYPE_ALL_LOCAL		cpu_to_le32(0x00000080)
+#define RNDIS_PACKET_TYPE_GROUP			cpu_to_le32(0x00001000)
+#define RNDIS_PACKET_TYPE_ALL_FUNCTIONAL	cpu_to_le32(0x00002000)
+#define RNDIS_PACKET_TYPE_FUNCTIONAL		cpu_to_le32(0x00004000)
+#define RNDIS_PACKET_TYPE_MAC_FRAME		cpu_to_le32(0x00008000)

 /* default filter used with RNDIS devices */
 #define RNDIS_DEFAULT_FILTER ( \
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@ -176,6 +176,11 @@ struct skb_data {	/* skb->cb is one of these */
 	size_t			length;
 };

+extern int usbnet_open (struct net_device *net);
+extern int usbnet_stop (struct net_device *net);
+extern int usbnet_start_xmit (struct sk_buff *skb, struct net_device *net);
+extern void usbnet_tx_timeout (struct net_device *net);
+extern int usbnet_change_mtu (struct net_device *net, int new_mtu);

 extern int usbnet_get_endpoints(struct usbnet *, struct usb_interface *);
 extern void usbnet_defer_kevent (struct usbnet *, int);
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@ -22,11 +22,19 @@
 #define VIRTIO_NET_F_HOST_ECN	13	/* Host can handle TSO[6] w/ ECN in. */
 #define VIRTIO_NET_F_HOST_UFO	14	/* Host can handle UFO in. */
 #define VIRTIO_NET_F_MRG_RXBUF	15	/* Host can merge receive buffers. */
+#define VIRTIO_NET_F_STATUS	16	/* virtio_net_config.status available */
+#define VIRTIO_NET_F_CTRL_VQ	17	/* Control channel available */
+#define VIRTIO_NET_F_CTRL_RX	18	/* Control channel RX mode support */
+#define VIRTIO_NET_F_CTRL_VLAN	19	/* Control channel VLAN filtering */
+
+#define VIRTIO_NET_S_LINK_UP	1	/* Link is up */

 struct virtio_net_config
 {
 	/* The config defining mac address (if VIRTIO_NET_F_MAC) */
 	__u8 mac[6];
+	/* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
+	__u16 status;
 } __attribute__((packed));

 /* This is the first element of the scatter-gather list.  If you don't
@ -54,4 +62,67 @@ struct virtio_net_hdr_mrg_rxbuf {
 	__u16 num_buffers;	/* Number of merged rx buffers */
 };

+/*
+ * Control virtqueue data structures
+ *
+ * The control virtqueue expects a header in the first sg entry
+ * and an ack/status response in the last entry.  Data for the
+ * command goes in between.
+ */
+struct virtio_net_ctrl_hdr {
+	__u8 class;
+	__u8 cmd;
+} __attribute__((packed));
+
+typedef __u8 virtio_net_ctrl_ack;
+
+#define VIRTIO_NET_OK     0
+#define VIRTIO_NET_ERR    1
+
+/*
+ * Control the RX mode, ie. promisucous and allmulti.  PROMISC and
+ * ALLMULTI commands require an "out" sg entry containing a 1 byte
+ * state value, zero = disable, non-zero = enable.  These commands
+ * are supported with the VIRTIO_NET_F_CTRL_RX feature.
+ */
+#define VIRTIO_NET_CTRL_RX    0
+ #define VIRTIO_NET_CTRL_RX_PROMISC      0
+ #define VIRTIO_NET_CTRL_RX_ALLMULTI     1
+
+/*
+ * Control the MAC filter table.
+ *
+ * The MAC filter table is managed by the hypervisor, the guest should
+ * assume the size is infinite.  Filtering should be considered
+ * non-perfect, ie. based on hypervisor resources, the guest may
+ * received packets from sources not specified in the filter list.
+ *
+ * In addition to the class/cmd header, the TABLE_SET command requires
+ * two out scatterlists.  Each contains a 4 byte count of entries followed
+ * by a concatenated byte stream of the ETH_ALEN MAC addresses.  The
+ * first sg list contains unicast addresses, the second is for multicast.
+ * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
+ * is available.
+ */
+struct virtio_net_ctrl_mac {
+	__u32 entries;
+	__u8 macs[][ETH_ALEN];
+} __attribute__((packed));
+
+#define VIRTIO_NET_CTRL_MAC    1
+ #define VIRTIO_NET_CTRL_MAC_TABLE_SET        0
+
+/*
+ * Control VLAN filtering
+ *
+ * The VLAN filter table is controlled via a simple ADD/DEL interface.
+ * VLAN IDs not added may be filterd by the hypervisor.  Del is the
+ * opposite of add.  Both commands expect an out entry containing a 2
+ * byte VLAN ID.  VLAN filterting is available with the
+ * VIRTIO_NET_F_CTRL_VLAN feature bit.
+ */
+#define VIRTIO_NET_CTRL_VLAN       2
+ #define VIRTIO_NET_CTRL_VLAN_ADD             0
+ #define VIRTIO_NET_CTRL_VLAN_DEL             1
+
 #endif /* _LINUX_VIRTIO_NET_H */
--- a/include/linux/wimax/i2400m.h
+++ b/include/linux/wimax/i2400m.h
@ -207,6 +207,7 @@ enum i2400m_pt {
 	I2400M_PT_TRACE,	/* For device debug */
 	I2400M_PT_RESET_WARM,	/* device reset */
 	I2400M_PT_RESET_COLD,	/* USB[transport] reset, like reconnect */
+	I2400M_PT_EDATA,	/* Extended RX data */
 	I2400M_PT_ILLEGAL
 };

@ -221,6 +222,48 @@ struct i2400m_pl_data_hdr {
 } __attribute__((packed));


+/*
+ * Payload for an extended data packet
+ *
+ * New in fw v1.4
+ *
+ * @reorder: if this payload has to be reorder or not (and how)
+ * @cs: the type of data in the packet, as defined per (802.16e
+ *     T11.13.19.1). Currently only 2 (IPv4 packet) supported.
+ *
+ * This is prefixed to each and every INCOMING DATA packet.
+ */
+struct i2400m_pl_edata_hdr {
+	__le32 reorder;		/* bits defined in i2400m_ro */
+	__u8 cs;
+	__u8 reserved[11];
+} __attribute__((packed));
+
+enum i2400m_cs {
+	I2400M_CS_IPV4_0 = 0,
+	I2400M_CS_IPV4 = 2,
+};
+
+enum i2400m_ro {
+	I2400M_RO_NEEDED     = 0x01,
+	I2400M_RO_TYPE       = 0x03,
+	I2400M_RO_TYPE_SHIFT = 1,
+	I2400M_RO_CIN        = 0x0f,
+	I2400M_RO_CIN_SHIFT  = 4,
+	I2400M_RO_FBN        = 0x07ff,
+	I2400M_RO_FBN_SHIFT  = 8,
+	I2400M_RO_SN         = 0x07ff,
+	I2400M_RO_SN_SHIFT   = 21,
+};
+
+enum i2400m_ro_type {
+	I2400M_RO_TYPE_RESET = 0,
+	I2400M_RO_TYPE_PACKET,
+	I2400M_RO_TYPE_WS,
+	I2400M_RO_TYPE_PACKET_WS,
+};
+
+
 /* Misc constants */
 enum {
 	I2400M_PL_PAD = 16,	/* Payload data size alignment */
@ -381,6 +424,9 @@ enum i2400m_tlv {
 	I2400M_TLV_RF_STATUS = 163,
 	I2400M_TLV_DEVICE_RESET_TYPE = 132,
 	I2400M_TLV_CONFIG_IDLE_PARAMETERS = 601,
+	I2400M_TLV_CONFIG_IDLE_TIMEOUT = 611,
+	I2400M_TLV_CONFIG_D2H_DATA_FORMAT = 614,
+	I2400M_TLV_CONFIG_DL_HOST_REORDER = 615,
 };


@ -509,4 +555,27 @@ struct i2400m_tlv_media_status {
 	__le32 media_status;
 } __attribute__((packed));

+
+/* New in v1.4 */
+struct i2400m_tlv_config_idle_timeout {
+	struct i2400m_tlv_hdr hdr;
+	__le32 timeout;	/* 100 to 300000 ms [5min], 100 increments
+			 * 0 disabled */
+} __attribute__((packed));
+
+/* New in v1.4 -- for backward compat, will be removed */
+struct i2400m_tlv_config_d2h_data_format {
+	struct i2400m_tlv_hdr hdr;
+	__u8 format; 		/* 0 old format, 1 enhanced */
+	__u8 reserved[3];
+} __attribute__((packed));
+
+/* New in v1.4 */
+struct i2400m_tlv_config_dl_host_reorder {
+	struct i2400m_tlv_hdr hdr;
+	__u8 reorder; 		/* 0 disabled, 1 enabled */
+	__u8 reserved[3];
+} __attribute__((packed));
+
+
 #endif /* #ifndef __LINUX__WIMAX__I2400M_H__ */
--- a/include/linux/wireless.h
+++ b/include/linux/wireless.h
@ -577,18 +577,22 @@
 #define IW_AUTH_RX_UNENCRYPTED_EAPOL	8
 #define IW_AUTH_ROAMING_CONTROL		9
 #define IW_AUTH_PRIVACY_INVOKED		10
+#define IW_AUTH_CIPHER_GROUP_MGMT	11
+#define IW_AUTH_MFP			12

 /* IW_AUTH_WPA_VERSION values (bit field) */
 #define IW_AUTH_WPA_VERSION_DISABLED	0x00000001
 #define IW_AUTH_WPA_VERSION_WPA		0x00000002
 #define IW_AUTH_WPA_VERSION_WPA2	0x00000004

-/* IW_AUTH_PAIRWISE_CIPHER and IW_AUTH_GROUP_CIPHER values (bit field) */
+/* IW_AUTH_PAIRWISE_CIPHER, IW_AUTH_GROUP_CIPHER, and IW_AUTH_CIPHER_GROUP_MGMT
+ * values (bit field) */
 #define IW_AUTH_CIPHER_NONE	0x00000001
 #define IW_AUTH_CIPHER_WEP40	0x00000002
 #define IW_AUTH_CIPHER_TKIP	0x00000004
 #define IW_AUTH_CIPHER_CCMP	0x00000008
 #define IW_AUTH_CIPHER_WEP104	0x00000010
+#define IW_AUTH_CIPHER_AES_CMAC	0x00000020

 /* IW_AUTH_KEY_MGMT values (bit field) */
 #define IW_AUTH_KEY_MGMT_802_1X	1
@ -604,6 +608,11 @@
 #define IW_AUTH_ROAMING_DISABLE	1	/* user space program used for roaming
 					 * control */

+/* IW_AUTH_MFP (management frame protection) values */
+#define IW_AUTH_MFP_DISABLED	0	/* MFP disabled */
+#define IW_AUTH_MFP_OPTIONAL	1	/* MFP optional */
+#define IW_AUTH_MFP_REQUIRED	2	/* MFP required */
+
 /* SIOCSIWENCODEEXT definitions */
 #define IW_ENCODE_SEQ_MAX_SIZE	8
 /* struct iw_encode_ext ->alg */
@ -612,6 +621,7 @@
 #define IW_ENCODE_ALG_TKIP	2
 #define IW_ENCODE_ALG_CCMP	3
 #define IW_ENCODE_ALG_PMK	4
+#define IW_ENCODE_ALG_AES_CMAC	5
 /* struct iw_encode_ext ->ext_flags */
 #define IW_ENCODE_EXT_TX_SEQ_VALID	0x00000001
 #define IW_ENCODE_EXT_RX_SEQ_VALID	0x00000002