fw-api: CL 2942293 - update fw common interface files

Extensions to the WMI coex configuration message

Change-Id: Ifa4a683897837ba0ebde8682fde35580bd504cfd
CRs-Fixed: 1107600
This commit is contained in:
Sandeep Puligilla 2017-03-21 11:01:25 -07:00
commit 13a9d1eb8e
2 changed files with 39 additions and 1 deletions

View file

@ -17556,6 +17556,30 @@ typedef struct {
A_UINT32 ofdm_level;
} wmi_ani_ofdm_event_fixed_param;
/* When a bit is set it specifies the particular WLAN traffic type is high priority.
* BT low priority traffic has higher priority than WLAN low priority traffic and has
* lower priority when compared to WLAN high priority traffic.
* BT high priority traffic has higher priority than WLAN low/high priority traffic.
*/
#define WMI_PDEV_BE_PRIORITY_BIT (1<<0)
#define WMI_PDEV_BK_PRIORITY_BIT (1<<1)
#define WMI_PDEV_VI_PRIORITY_BIT (1<<2)
#define WMI_PDEV_VO_PRIORITY_BIT (1<<3)
#define WMI_PDEV_BEACON_PRIORITY_BIT (1<<4)
#define WMI_PDEV_MGMT_PRIORITY_BIT (1<<5)
#define WMI_PDEV_IS_BE_PRIORITY_SET(val) ((val) & WMI_PDEV_BE_PRIORITY_BIT)
#define WMI_PDEV_IS_BK_PRIORITY_SET(val) ((val) & WMI_PDEV_BK_PRIORITY_BIT)
#define WMI_PDEV_IS_VI_PRIORITY_SET(val) ((val) & WMI_PDEV_VI_PRIORITY_BIT)
#define WMI_PDEV_IS_VO_PRIORITY_SET(val) ((val) & WMI_PDEV_VO_PRIORITY_BIT)
#define WMI_PDEV_IS_BEACON_PRIORITY_SET(val) ((val) & WMI_PDEV_BEACON_PRIORITY_BIT)
#define WMI_PDEV_IS_MGMT_PRIORITY_SET(val) ((val) & WMI_PDEV_MGMT_PRIORITY_BIT)
typedef enum wmi_coex_algo_type {
WMI_COEX_ALGO_UNCONS_FREERUN = 0,
WMI_COEX_ALGO_FREERUN = 1,
WMI_COEX_ALGO_OCS = 2,
} WMI_COEX_ALGO_TYPE;
typedef enum wmi_coex_config_type {
WMI_COEX_CONFIG_PAGE_P2P_TDM = 1, /* config interval (arg1 BT, arg2 WLAN) for P2P + PAGE */
WMI_COEX_CONFIG_PAGE_STA_TDM = 2, /* config interval (arg1 BT, arg2 WLAN) for STA + PAGE */
@ -17570,6 +17594,16 @@ typedef enum wmi_coex_config_type {
WMI_COEX_CONFIG_INQUIRY_P2P_STA_TDM = 11, /* config interval (ms units) (arg1 BT, arg2 WLAN) for P2P + STA + INQUIRY */
WMI_COEX_CONFIG_TX_POWER = 12, /* config wlan total tx power when bt coex (arg1 is wlan_tx_power_limit, in 0.5dbm units) */
WMI_COEX_CONFIG_PTA_CONFIG = 13, /* config whether enable PTA and GPIO number (arg1 is pta_enable, arg2 is GPIO number used as /BT_ACTIVE/BT_PRIORITY/WLAN_DENY,8 bit for each) */
WMI_COEX_CONFIG_AP_TDM = 14, /* config interval (arg1 duty cycle in ms, arg2 WLAN duration in ms) for AP */
WMI_COEX_CONFIG_WLAN_SCAN_PRIORITY = 15, /* config to set WLAN priority during Off Channel Scan */
WMI_COEX_CONFIG_WLAN_PKT_PRIORITY = 16, /* config to set WLAN priority for BE/BK/VO/VI/Beacon/Management frame */
WMI_COEX_CONFIG_PTA_INTERFACE = 17, /* config PTA interface,
arg1 PTA num,
arg2 mode (2-wire/3-wire/PTA),
arg3 first slot time in microsec,
arg4 BT priority time in microsec,
arg5 PTA algorithm (WMI_COEX_ALGO_TYPE),
arg6 PTA priority */
} WMI_COEX_CONFIG_TYPE;
typedef struct {
@ -17578,6 +17612,10 @@ typedef struct {
A_UINT32 config_type; /* wmi_coex_config_type enum */
A_UINT32 config_arg1;
A_UINT32 config_arg2;
A_UINT32 config_arg3;
A_UINT32 config_arg4;
A_UINT32 config_arg5;
A_UINT32 config_arg6;
} WMI_COEX_CONFIG_CMD_fixed_param;
/**

View file

@ -36,7 +36,7 @@
#define __WMI_VER_MINOR_ 0
/** WMI revision number has to be incremented when there is a
* change that may or may not break compatibility. */
#define __WMI_REVISION_ 370
#define __WMI_REVISION_ 371
/** The Version Namespace should not be normally changed. Only
* host and firmware of the same WMI namespace will work