Merge branch 'i2c/for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wilfram Sang:
 "I2C has the following updates for you:

   - an immutable cross-subsystem branch fixing PMIC access on Intel
     Baytrail

   - bigger driver updates to the designware, meson, exynos5 drivers

   - new i2c_acpi_new_device() function to create devices from ACPI

   - struct i2c_driver has now a flag 'disable_i2c_core_irq_mapping' to
     allow custom IRQ mapping in case the default does not fit

   - mux subsystem centralized error messages in its core

   - new driver for ltc4306 i2c mux

   - usual set of small updates"

* 'i2c/for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (44 commits)
  i2c: thunderx: Enable HWMON class probing
  i2c: rcar: clarify PM handling with more comments
  i2c: rcar: fix resume by always initializing registers before transfer
  i2c: tegra: fix spelling mistake: "contoller" -> "controller"
  i2c: exynos5: use core helper to get driver data
  i2c: exynos5: de-duplicate error logs on clock setup
  i2c: exynos5: simplify clock frequency handling
  i2c: exynos5: simplify timings calculation
  i2c: designware-baytrail: fix potential null pointer dereference on dev
  i2c: designware: Get selected speed mode sda-hold-time via ACPI
  [media] cx231xx: stop double error reporting
  i2c: core: Allow drivers to disable i2c-core irq mapping
  i2c: core: Add new i2c_acpi_new_device helper function
  i2c: core: Allow getting ACPI info by index
  i2c: img-scb: use setup_timer
  i2c: i2c-scmi: add a MS HID
  i2c: mux: ltc4306: LTC4306 and LTC4305 I2C multiplexer/switch
  dt-bindings: i2c: mux: ltc4306: Add dt-bindings for I2C multiplexer/switch
  i2c: mux: reg: stop double error reporting
  i2c: mux: pinctrl: stop double error reporting
  ...

Documentation/devicetree/bindings/i2c/i2c-meson.txt

@@ -8,6 +8,8 @@ Required properties:
  - #address-cells: should be <1>
  - #size-cells: should be <0>
 
+For details regarding the following core I2C bindings see also i2c.txt.
+
 Optional properties:
 - clock-frequency: the desired I2C bus clock frequency in Hz; in
   absence of this property the default value is used (100 kHz).

Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt

@@ -0,0 +1,61 @@
+* Linear Technology / Analog Devices I2C bus switch
+
+Required Properties:
+
+  - compatible: Must contain one of the following.
+    "lltc,ltc4305", "lltc,ltc4306"
+  - reg: The I2C address of the device.
+
+  The following required properties are defined externally:
+
+  - Standard I2C mux properties. See i2c-mux.txt in this directory.
+  - I2C child bus nodes. See i2c-mux.txt in this directory.
+
+Optional Properties:
+
+  - enable-gpios: Reference to the GPIO connected to the enable input.
+  - i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all
+    children in idle state. This is necessary for example, if there are several
+    multiplexers on the bus and the devices behind them use same I2C addresses.
+  - gpio-controller: Marks the device node as a GPIO Controller.
+  - #gpio-cells: Should be two.  The first cell is the pin number and
+	the second cell is used to specify flags.
+	See ../gpio/gpio.txt for more information.
+  - ltc,downstream-accelerators-enable: Enables the rise time accelerators
+	on the downstream port.
+  - ltc,upstream-accelerators-enable: Enables the rise time accelerators
+	on the upstream port.
+
+Example:
+
+	ltc4306: i2c-mux@4a {
+		compatible = "lltc,ltc4306";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x4a>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "at,24c02";
+				reg = <0x50>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "at,24c02";
+				reg = <0x50>;
+			};
+		};
+	};

Documentation/devicetree/bindings/i2c/i2c-rk3x.txt

@@ -11,6 +11,7 @@ Required properties :
    - "rockchip,rk3188-i2c": for rk3188
    - "rockchip,rk3228-i2c": for rk3228
    - "rockchip,rk3288-i2c": for rk3288
+   - "rockchip,rk3328-i2c", "rockchip,rk3399-i2c": for rk3328
    - "rockchip,rk3399-i2c": for rk3399
  - interrupts : interrupt number
  - clocks: See ../clock/clock-bindings.txt