ARM: SoC platform updates for 4.17

This release brings up a new platform based on the old ARM9 core: the
 Nuvoton NPCM is used as a baseboard management controller, competing
 with the better known ASpeed AST2xx series.
 
 Another important change is the addition of ARMv7-A based chips
 in mach-stm32. The older parts in this platform are ARMv7-M based
 microcontrollers, now they are expanding to general-purpose workloads.
 
 The other changes are the usual defconfig updates to enable additional
 drivers, lesser bugfixes. The largest updates as often are the ongoing
 OMAP cleanups, but we also have a number of changes for the older
 PXA and davinci platforms this time.
 
 For the Renesas shmobile/r-car platform, some new infrastructure
 is needed to make the watchdog work correctly.
 
 Supporting Multiprocessing on Allwinner A80 required a significant
 amount of new code, but is not doing anything unexpected.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaxibSAAoJEGCrR//JCVInPwcP/2ZdLMXXXaJBM+rCRPhT+vR1
 FsKqcTCC5RHbVcKW+N54nmlsqofy2GadlmyfOdrFXtbf+Sm2dRNsDrHDOhvoPp37
 fwBd0wGw0PLjNE8SEPp/ldtFe11Dbg0WGBzJ4PAPJgt1W4hvW8//VzVW1XsiRrVc
 9SlZ66DwR95UQ5pwy+dfE8f9A/WW4XaMq0UHQ3/deQ/Te/64b/C6CJtT3W73WAlR
 83UHgkwq3WvI+hhvg4QX9H0Q6dcK2JLUWsAB0xnZP8Q8t30NdDpl61uZL0A4Mh9Y
 38lPhUjPUyUpsGrOttmMEQNzbAk4m/nzQxByYYmhkx3x+mlhjdA9KNavxDYVxXN2
 1tzz62wst8pLePqVt2UsFqsaruJGMuTIooOdc5iCjG1c2N2kQGdBsuOvLjYu9kV6
 XPTfvvAYkMo9rC0MbdPuobG+h/WrYHuc9SD2Mnt+kNaw1yJL08fWENjSuwP7kheb
 2A5jdAFNrGqgcrWMsQOw8eYYC7z7WojkLq0kHrBbwIlVD7KIZurv2fm/iVo4+xPH
 Gig5HuehMUtVYAf+Q1KWFlqS01fXMErt2pDGI5f1mNumXCB5kdWoSKbU8lOg03f8
 ZqBHlfly+QDMOx0qfkxFX+phHPWHTOC+45yHK2Xq+n9urXmQbzYZxTzq5zCu6jcm
 4yH0jaykoHODGNLIt50f
 =HD9V
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "This release brings up a new platform based on the old ARM9 core: the
  Nuvoton NPCM is used as a baseboard management controller, competing
  with the better known ASpeed AST2xx series.

  Another important change is the addition of ARMv7-A based chips in
  mach-stm32. The older parts in this platform are ARMv7-M based
  microcontrollers, now they are expanding to general-purpose workloads.

  The other changes are the usual defconfig updates to enable additional
  drivers, lesser bugfixes. The largest updates as often are the ongoing
  OMAP cleanups, but we also have a number of changes for the older PXA
  and davinci platforms this time.

  For the Renesas shmobile/r-car platform, some new infrastructure is
  needed to make the watchdog work correctly.

  Supporting Multiprocessing on Allwinner A80 required a significant
  amount of new code, but is not doing anything unexpected"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (179 commits)
  arm: npcm: modify configuration for the NPCM7xx BMC.
  MAINTAINERS: update entry for ARM/berlin
  ARM: omap2: fix am43xx build without L2X0
  ARM: davinci: da8xx: simplify CFGCHIP regmap_config
  ARM: davinci: da8xx: fix oops in USB PHY driver due to stack allocated platform_data
  ARM: multi_v7_defconfig: add NXP FlexCAN IP support
  ARM: multi_v7_defconfig: enable thermal driver for i.MX devices
  ARM: multi_v7_defconfig: add RN5T618 PMIC family support
  ARM: multi_v7_defconfig: add NXP graphics drivers
  ARM: multi_v7_defconfig: add GPMI NAND controller support
  ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs
  ARM: multi_v7_defconfig: configure I2C driver built-in
  arm64: defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE
  ARM: imx: fix imx6sll-only build
  ARM: imx: select ARM_CPU_SUSPEND for CPU_IDLE as well
  ARM: mxs_defconfig: Re-sync defconfig
  ARM: imx_v4_v5_defconfig: Use the generic fsl-asoc-card driver
  ARM: imx_v4_v5_defconfig: Re-sync defconfig
  arm64: defconfig: enable stmmac ethernet to defconfig
  ARM: EXYNOS: Simplify code in coupled CPU idle hot path
  ...

drivers/mtd/nand/Kconfig

@@ -313,17 +313,6 @@ config MTD_NAND_ATMEL
 	  Enables support for NAND Flash / Smart Media Card interface
 	  on Atmel AT91 processors.
 
-config MTD_NAND_PXA3xx
-	tristate "NAND support on PXA3xx and Armada 370/XP"
-	depends on !MTD_NAND_MARVELL
-	depends on PXA3xx || ARCH_MMP || PLAT_ORION || ARCH_MVEBU
-	help
-
-	  This enables the driver for the NAND flash device found on
-	  PXA3xx processors (NFCv1) and also on 32-bit Armada
-	  platforms (XP, 370, 375, 38x, 39x) and 64-bit Armada
-	  platforms (7K, 8K) (NFCv2).
-
 config MTD_NAND_MARVELL
 	tristate "NAND controller support on Marvell boards"
 	depends on PXA3xx || ARCH_MMP || PLAT_ORION || ARCH_MVEBU || \

drivers/mtd/nand/Makefile

@@ -31,7 +31,6 @@ omap2_nand-objs := omap2.o
 obj-$(CONFIG_MTD_NAND_OMAP2) 		+= omap2_nand.o
 obj-$(CONFIG_MTD_NAND_OMAP_BCH_BUILD)	+= omap_elm.o
 obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx270_nand.o
-obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
 obj-$(CONFIG_MTD_NAND_MARVELL)		+= marvell_nand.o
 obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
 obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o

drivers/mtd/nand/marvell_nand.c

@@ -2520,8 +2520,7 @@ static int marvell_nand_chip_init(struct device *dev, struct marvell_nfc *nfc,
 
 	if (pdata)
 		/* Legacy bindings support only one chip */
-		ret = mtd_device_register(mtd, pdata->parts[0],
-					  pdata->nr_parts[0]);
+		ret = mtd_device_register(mtd, pdata->parts, pdata->nr_parts);
 	else
 		ret = mtd_device_register(mtd, NULL, 0);
 	if (ret) {