Merge "dt-bindings: devfreq: Add DT bindings to support OPP BW values"

bindings/devfreq/arm-memlat-mon.txt

@@ -4,7 +4,7 @@ arm-memlat-mon is a device that represents the use of the PMU in ARM cores
 to measure the parameters for latency driven memory access patterns.
 
 Required properties:
-- compatible:			Must be "qcom,arm-memlat-mon"
+- compatible:			Must be "qcom,arm-memlat-mon" or "qcom,arm-cpu-mon"
 - qcom,cpulist:			List of CPU phandles to be monitored in a cluster
 - qcom,target-dev:		The DT device that corresponds to this master port
 - qcom,core-dev-table:		A mapping table of core frequency to a required bandwidth vote at the

bindings/devfreq/devfreq_icc.txt

@@ -10,11 +10,11 @@ Required properties:
 - interconnects:	Pairs of phandles and interconnect provider specificers
 			to denote the edge source and destination ports of the
 			desired interconnect path.
-- qcom,bw-tbl:		A list of meaningful instantaneous bandwidth values
-			(in MB/s) that can be requested from the device
-			master port to the slave port. The list of values
-			depend on the supported bus/slave frequencies and the
-			bus width.
+- operating-points-v2:	A phandle to the OPP v2 table that holds meaningful
+			instantaneous bandwidth values (in MB/s) that can be
+			requested from the device master port to the slave port.
+			The list of values depend on the supported bus/slave
+			frequencies and the bus width.
 
 Optional properties:
 - qcom,active-only:	Indicates that the bandwidth votes need to be
@@ -24,17 +24,36 @@ Optional properties:
 
 Example:
 
+	bw_opp_table: bw-opp-table {
+		compatible = "operating-points-v2";
+		opp-75  {
+			opp-hz = /bits/ 64 <  572 >; /*  75 MHz */
+		};
+		opp-150 {
+			opp-hz = /bits/ 64 < 1144 >; /* 150 MHz */
+		};
+		opp-200 {
+			opp-hz = /bits/ 64 < 1525 >; /* 200 MHz */
+		};
+		opp-307 {
+			opp-hz = /bits/ 64 < 2342 >; /* 307 MHz */
+		};
+		opp-460 {
+			opp-hz = /bits/ 64 < 3509 >; /* 460 MHz */
+		};
+		opp-614 {
+			opp-hz = /bits/ 64 < 4684 >; /* 614 MHz */
+		};
+		opp-800 {
+			opp-hz = /bits/ 64 < 6103 >; /* 800 MHz */
+		};
+		opp-931 {
+			opp-hz = /bits/ 64 < 7102 >; /* 931 MHz */
+		};
+	};
 	qcom,cpubw {
 		compatible = "qcom,devfreq-icc";
 		interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>;
 		qcom,active-only;
-		qcom,bw-tbl =
-			<  572 /*  75 MHz */ >,
-			< 1144 /* 150 MHz */ >,
-			< 1525 /* 200 MHz */ >,
-			< 2342 /* 307 MHz */ >,
-			< 3509 /* 460 MHz */ >,
-			< 4684 /* 614 MHz */ >,
-			< 6103 /* 800 MHz */ >,
-			< 7102 /* 931 MHz */ >;
+		operating-points-v2 = <&bw_opp_table>;
 	};