diff --git a/qcom/holi-ibiza-common-overlay.dtsi b/qcom/holi-ibiza-common-overlay.dtsi
index 85ffae6b7fa6..9b1a7da79830 100644
--- a/qcom/holi-ibiza-common-overlay.dtsi
+++ b/qcom/holi-ibiza-common-overlay.dtsi
@@ -13,7 +13,7 @@
 #include "holi-moto-common-overlay.dtsi"
 #include "ibiza-display.dtsi"
 #include "ibiza-touchscreen.dtsi"
-#include "denver-fps-overlay.dtsi"
+#include "ibiza-fps-overlay.dtsi"
 #include "camera/holi-camera-sensor-mot-ibiza-overlay.dtsi"
 #include "holi-audio-wcd9370-aw882xx-overlay.dtsi"
 #include "holi-ibiza-fmr-overlay.dtsi"
diff --git a/qcom/ibiza-fps-overlay.dtsi b/qcom/ibiza-fps-overlay.dtsi
new file mode 100644
index 000000000000..da55900ab2c4
--- /dev/null
+++ b/qcom/ibiza-fps-overlay.dtsi
@@ -0,0 +1,123 @@
+&tlmm {
+	chipone {
+		chipone_int_active: chipone_int_active {
+			/* INTERRUPT */
+			mux {
+				pins = "gpio17";
+				function = "gpio";
+			};
+
+			config {
+				pins = "gpio17";
+				drive-strength = <2>; /* 2 MA */
+				input-enable;
+				bias-pull-up;
+			};
+		};
+		chipone_int_suspend: chipone_int_suspend {
+			/* INTERRUPT */
+			mux {
+				pins = "gpio17";
+				function = "gpio";
+			};
+
+			config {
+				pins = "gpio17";
+				drive-strength = <2>; /* 2 MA */
+				input-enable;
+				bias-pull-up;
+			};
+		};
+	};
+
+	fps_rst_active: fps_rst_active {
+		/* active state */
+		mux {
+			pins = "gpio18";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio18";
+			drive-strength = <2>; /* 2 MA */
+			output-low;
+		};
+	};
+
+	fps_rst_suspend: fps_rst_suspend {
+		/* sleep state */
+		mux {
+			pins = "gpio18";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio18";
+			drive-strength = <2>; /* 2 MA */
+		};
+	};
+
+	fps_int_active: fps_int_active {
+		/* active state */
+		mux {
+			pins = "gpio18";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio18";
+			drive-strength = <2>; /* 2 MA */
+			bias-pull-down;
+			input-enable;
+		};
+	};
+
+	fps_int_suspend: fps_int_suspend {
+		/* sleep state */
+		mux {
+			pins = "gpio17";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio17";
+			drive-strength = <2>; /* 2 MA */
+			bias-pull-down;
+			input-enable;
+		};
+	};
+};
+
+&pm6350_l8 {
+ qcom,init-voltage = <3304000>;
+ regulator-min-microvolt = <3304000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-always-on;
+};
+
+&soc {
+	fingerprint {
+		compatible = "qcom,fingerprint-gpio";
+		status = "ok";
+		reg = <0>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <17 0x0>;
+		fp-gpio-int = <&tlmm 17 0x2>;
+		fp-gpio-reset = <&tlmm 18 0x2>;
+		pinctrl-names = "default", "suspend";
+		pinctrl-0 = <&chipone_int_active>;
+		pinctrl-1 = <&chipone_int_suspend>;
+	};
+
+	fpc: fpc_fpc1020 {
+		compatible = "fpc,fpc1020";
+		status = "ok";
+		irq = <&tlmm 17 0>;
+		rst = <&tlmm 18 0>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <17 0>;
+		pinctrl-names = "default", "suspend";
+		pinctrl-0 = <&fps_rst_active &fps_int_active>;
+		pinctrl-1 = <&fps_rst_suspend &fps_int_suspend>;
+	};
+};