rapidio: modify for rev.3 specification changes

Implement changes made in RapidIO specification rev.3 to LP-Serial Physical Layer register definitions: - use per-port register offset calculations based on LP-Serial Extended Features Block (EFB) Register Map type (I or II) with different per-port offset step (0x20 vs 0x40 respectfully). - remove deprecated Parallel Physical layer definitions and related code. [[email protected]: fix DocBook warning for gen3 update] Link: http://lkml.kernel.org/r/[email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Alexandre Bounine <[email protected]> Tested-by: Barry Wood <[email protected]> Cc: Matt Porter <[email protected]> Cc: Andre van Herk <[email protected]> Cc: Barry Wood <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2026-10-30 19:51:31 -04:00 · 2016-08-02 14:06:57 -07:00 · 2016-08-02 14:06:57 -07:00 · 1ae842de1d
commit 1ae842de1d
parent a057a52e94
8 changed files with 249 additions and 191 deletions
--- a/drivers/rapidio/devices/rio_mport_cdev.c
+++ b/drivers/rapidio/devices/rio_mport_cdev.c
@ -1813,7 +1813,7 @@ static int rio_mport_add_riodev(struct mport_cdev_priv *priv,
 	if (rdev->pef & RIO_PEF_EXT_FEATURES) {
 		rdev->efptr = rval & 0xffff;
 		rdev->phys_efptr = rio_mport_get_physefb(mport, 0, destid,
-							 hopcount);
+						hopcount, &rdev->phys_rmap);

 		rdev->em_efptr = rio_mport_get_feature(mport, 0, destid,
 						hopcount, RIO_EFB_ERR_MGMNT);
--- a/drivers/rapidio/devices/tsi721.c
+++ b/drivers/rapidio/devices/tsi721.c
@ -2555,11 +2555,11 @@ static int tsi721_query_mport(struct rio_mport *mport,
 	struct tsi721_device *priv = mport->priv;
 	u32 rval;

-	rval = ioread32(priv->regs + (0x100 + RIO_PORT_N_ERR_STS_CSR(0)));
+	rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_ERR_STS_CSR(0, 0));
 	if (rval & RIO_PORT_N_ERR_STS_PORT_OK) {
-		rval = ioread32(priv->regs + (0x100 + RIO_PORT_N_CTL2_CSR(0)));
+		rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_CTL2_CSR(0, 0));
 		attr->link_speed = (rval & RIO_PORT_N_CTL2_SEL_BAUD) >> 28;
-		rval = ioread32(priv->regs + (0x100 + RIO_PORT_N_CTL_CSR(0)));
+		rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_CTL_CSR(0, 0));
 		attr->link_width = (rval & RIO_PORT_N_CTL_IPW) >> 27;
 	} else
 		attr->link_speed = RIO_LINK_DOWN;
@ -2673,9 +2673,9 @@ static int tsi721_setup_mport(struct tsi721_device *priv)
 	mport->ops = &tsi721_rio_ops;
 	mport->index = 0;
 	mport->sys_size = 0; /* small system */
-	mport->phy_type = RIO_PHY_SERIAL;
 	mport->priv = (void *)priv;
 	mport->phys_efptr = 0x100;
+	mport->phys_rmap = 1;
 	mport->dev.parent = &pdev->dev;
 	mport->dev.release = tsi721_mport_release;

--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@ -49,15 +49,6 @@ struct rio_id_table {
 static int next_destid = 0;
 static int next_comptag = 1;

-static int rio_mport_phys_table[] = {
-	RIO_EFB_PAR_EP_ID,
-	RIO_EFB_PAR_EP_REC_ID,
-	RIO_EFB_SER_EP_ID,
-	RIO_EFB_SER_EP_REC_ID,
-	-1,
-};
-
-
 /**
 * rio_destid_alloc - Allocate next available destID for given network
 * @net: RIO network
@ -380,10 +371,15 @@ static struct rio_dev *rio_setup_device(struct rio_net *net,
 	if (rdev->pef & RIO_PEF_EXT_FEATURES) {
 		rdev->efptr = result & 0xffff;
 		rdev->phys_efptr = rio_mport_get_physefb(port, 0, destid,
-							 hopcount);
+						hopcount, &rdev->phys_rmap);
+		pr_debug("RIO: %s Register Map %d device\n",
+			 __func__, rdev->phys_rmap);

 		rdev->em_efptr = rio_mport_get_feature(port, 0, destid,
 						hopcount, RIO_EFB_ERR_MGMNT);
+		if (!rdev->em_efptr)
+			rdev->em_efptr = rio_mport_get_feature(port, 0, destid,
+						hopcount, RIO_EFB_ERR_MGMNT_HS);
 	}

 	rio_mport_read_config_32(port, destid, hopcount, RIO_SRC_OPS_CAR,
@ -445,7 +441,7 @@ static struct rio_dev *rio_setup_device(struct rio_net *net,
 			rio_route_clr_table(rdev, RIO_GLOBAL_TABLE, 0);
 	} else {
 		if (do_enum)
-			/*Enable Input Output Port (transmitter reviever)*/
+			/*Enable Input Output Port (transmitter receiver)*/
 			rio_enable_rx_tx_port(port, 0, destid, hopcount, 0);

 		dev_set_name(&rdev->dev, "%02x:e:%04x", rdev->net->id,
@ -481,10 +477,8 @@ cleanup:

 /**
 * rio_sport_is_active- Tests if a switch port has an active connection.
- * @port: Master port to send transaction
- * @destid: Associated destination ID for switch
- * @hopcount: Hopcount to reach switch
- * @sport: Switch port number
+ * @rdev: RapidIO device object
+ * @sp: Switch port number
 *
 * Reads the port error status CSR for a particular switch port to
 * determine if the port has an active link.  Returns
@ -492,31 +486,12 @@ cleanup:
 * inactive.
 */
 static int
-rio_sport_is_active(struct rio_mport *port, u16 destid, u8 hopcount, int sport)
+rio_sport_is_active(struct rio_dev *rdev, int sp)
 {
 	u32 result = 0;
-	u32 ext_ftr_ptr;

-	ext_ftr_ptr = rio_mport_get_efb(port, 0, destid, hopcount, 0);
-
-	while (ext_ftr_ptr) {
-		rio_mport_read_config_32(port, destid, hopcount,
-					 ext_ftr_ptr, &result);
-		result = RIO_GET_BLOCK_ID(result);
-		if ((result == RIO_EFB_SER_EP_FREE_ID) ||
-		    (result == RIO_EFB_SER_EP_FREE_ID_V13P) ||
-		    (result == RIO_EFB_SER_EP_FREC_ID))
-			break;
-
-		ext_ftr_ptr = rio_mport_get_efb(port, 0, destid, hopcount,
-						ext_ftr_ptr);
-	}
-
-	if (ext_ftr_ptr)
-		rio_mport_read_config_32(port, destid, hopcount,
-					 ext_ftr_ptr +
-					 RIO_PORT_N_ERR_STS_CSR(sport),
-					 &result);
+	rio_read_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, sp),
+			   &result);

 	return result & RIO_PORT_N_ERR_STS_PORT_OK;
 }
@ -655,9 +630,7 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,

 			cur_destid = next_destid;

-			if (rio_sport_is_active
-			    (port, RIO_ANY_DESTID(port->sys_size), hopcount,
-			     port_num)) {
+			if (rio_sport_is_active(rdev, port_num)) {
 				pr_debug(
 				    "RIO: scanning device on port %d\n",
 				    port_num);
@ -785,8 +758,7 @@ rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid,
 			if (RIO_GET_PORT_NUM(rdev->swpinfo) == port_num)
 				continue;

-			if (rio_sport_is_active
-			    (port, destid, hopcount, port_num)) {
+			if (rio_sport_is_active(rdev, port_num)) {
 				pr_debug(
 				    "RIO: scanning device on port %d\n",
 				    port_num);
@ -831,21 +803,11 @@ rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid,
 static int rio_mport_is_active(struct rio_mport *port)
 {
 	u32 result = 0;
-	u32 ext_ftr_ptr;
-	int *entry = rio_mport_phys_table;
-
-	do {
-		if ((ext_ftr_ptr =
-		     rio_mport_get_feature(port, 1, 0, 0, *entry)))
-			break;
-	} while (*++entry >= 0);
-
-	if (ext_ftr_ptr)
-		rio_local_read_config_32(port,
-					 ext_ftr_ptr +
-					 RIO_PORT_N_ERR_STS_CSR(port->index),
-					 &result);

+	rio_local_read_config_32(port,
+		port->phys_efptr +
+			RIO_PORT_N_ERR_STS_CSR(port->index, port->phys_rmap),
+		&result);
 	return result & RIO_PORT_N_ERR_STS_PORT_OK;
 }

--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@ -786,10 +786,11 @@ EXPORT_SYMBOL_GPL(rio_unmap_outb_region);
 * @local: Indicate a local master port or remote device access
 * @destid: Destination ID of the device
 * @hopcount: Number of switch hops to the device
+ * @rmap: pointer to location to store register map type info
 */
 u32
 rio_mport_get_physefb(struct rio_mport *port, int local,
-		      u16 destid, u8 hopcount)
+		      u16 destid, u8 hopcount, u32 *rmap)
 {
 	u32 ext_ftr_ptr;
 	u32 ftr_header;
@ -807,14 +808,21 @@ rio_mport_get_physefb(struct rio_mport *port, int local,
 		ftr_header = RIO_GET_BLOCK_ID(ftr_header);
 		switch (ftr_header) {

-		case RIO_EFB_SER_EP_ID_V13P:
-		case RIO_EFB_SER_EP_REC_ID_V13P:
-		case RIO_EFB_SER_EP_FREE_ID_V13P:
 		case RIO_EFB_SER_EP_ID:
 		case RIO_EFB_SER_EP_REC_ID:
 		case RIO_EFB_SER_EP_FREE_ID:
-		case RIO_EFB_SER_EP_FREC_ID:
+		case RIO_EFB_SER_EP_M1_ID:
+		case RIO_EFB_SER_EP_SW_M1_ID:
+		case RIO_EFB_SER_EPF_M1_ID:
+		case RIO_EFB_SER_EPF_SW_M1_ID:
+			*rmap = 1;
+			return ext_ftr_ptr;

+		case RIO_EFB_SER_EP_M2_ID:
+		case RIO_EFB_SER_EP_SW_M2_ID:
+		case RIO_EFB_SER_EPF_M2_ID:
+		case RIO_EFB_SER_EPF_SW_M2_ID:
+			*rmap = 2;
 			return ext_ftr_ptr;

 		default:
@ -873,16 +881,16 @@ int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock)
 	u32 regval;

 	rio_read_config_32(rdev,
-				 rdev->phys_efptr + RIO_PORT_N_CTL_CSR(pnum),
-				 &regval);
+		RIO_DEV_PORT_N_CTL_CSR(rdev, pnum),
+		&regval);
 	if (lock)
 		regval |= RIO_PORT_N_CTL_LOCKOUT;
 	else
 		regval &= ~RIO_PORT_N_CTL_LOCKOUT;

 	rio_write_config_32(rdev,
-				  rdev->phys_efptr + RIO_PORT_N_CTL_CSR(pnum),
-				  regval);
+		RIO_DEV_PORT_N_CTL_CSR(rdev, pnum),
+		regval);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(rio_set_port_lockout);
@ -906,6 +914,7 @@ int rio_enable_rx_tx_port(struct rio_mport *port,
 #ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS
 	u32 regval;
 	u32 ext_ftr_ptr;
+	u32 rmap;

 	/*
 	* enable rx input tx output port
@ -913,34 +922,29 @@ int rio_enable_rx_tx_port(struct rio_mport *port,
 	pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = "
 		 "%d, port_num = %d)\n", local, destid, hopcount, port_num);

-	ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, hopcount);
+	ext_ftr_ptr = rio_mport_get_physefb(port, local, destid,
+					    hopcount, &rmap);

 	if (local) {
-		rio_local_read_config_32(port, ext_ftr_ptr +
-				RIO_PORT_N_CTL_CSR(0),
+		rio_local_read_config_32(port,
+				ext_ftr_ptr + RIO_PORT_N_CTL_CSR(0, rmap),
 				&regval);
 	} else {
 		if (rio_mport_read_config_32(port, destid, hopcount,
-		ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), &regval) < 0)
+			ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num, rmap),
+				&regval) < 0)
 			return -EIO;
 	}

-	if (regval & RIO_PORT_N_CTL_P_TYP_SER) {
-		/* serial */
-		regval = regval | RIO_PORT_N_CTL_EN_RX_SER
-				| RIO_PORT_N_CTL_EN_TX_SER;
-	} else {
-		/* parallel */
-		regval = regval | RIO_PORT_N_CTL_EN_RX_PAR
-				| RIO_PORT_N_CTL_EN_TX_PAR;
-	}
+	regval = regval | RIO_PORT_N_CTL_EN_RX | RIO_PORT_N_CTL_EN_TX;

 	if (local) {
-		rio_local_write_config_32(port, ext_ftr_ptr +
-					  RIO_PORT_N_CTL_CSR(0), regval);
+		rio_local_write_config_32(port,
+			ext_ftr_ptr + RIO_PORT_N_CTL_CSR(0, rmap), regval);
 	} else {
 		if (rio_mport_write_config_32(port, destid, hopcount,
-		    ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), regval) < 0)
+			ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num, rmap),
+				regval) < 0)
 			return -EIO;
 	}
 #endif
@ -1042,14 +1046,14 @@ rio_get_input_status(struct rio_dev *rdev, int pnum, u32 *lnkresp)
 		/* Read from link maintenance response register
 		 * to clear valid bit */
 		rio_read_config_32(rdev,
-			rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(pnum),
+			RIO_DEV_PORT_N_MNT_RSP_CSR(rdev, pnum),
 			&regval);
 		udelay(50);
 	}

 	/* Issue Input-status command */
 	rio_write_config_32(rdev,
-		rdev->phys_efptr + RIO_PORT_N_MNT_REQ_CSR(pnum),
+		RIO_DEV_PORT_N_MNT_REQ_CSR(rdev, pnum),
 		RIO_MNT_REQ_CMD_IS);

 	/* Exit if the response is not expected */
@ -1060,7 +1064,7 @@ rio_get_input_status(struct rio_dev *rdev, int pnum, u32 *lnkresp)
 	while (checkcount--) {
 		udelay(50);
 		rio_read_config_32(rdev,
-			rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(pnum),
+			RIO_DEV_PORT_N_MNT_RSP_CSR(rdev, pnum),
 			&regval);
 		if (regval & RIO_PORT_N_MNT_RSP_RVAL) {
 			*lnkresp = regval;
@ -1076,6 +1080,13 @@ rio_get_input_status(struct rio_dev *rdev, int pnum, u32 *lnkresp)
 * @rdev: Pointer to RIO device control structure
 * @pnum: Switch port number to clear errors
 * @err_status: port error status (if 0 reads register from device)
+ *
+ * TODO: Currently this routine is not compatible with recovery process
+ * specified for idt_gen3 RapidIO switch devices. It has to be reviewed
+ * to implement universal recovery process that is compatible full range
+ * off available devices.
+ * IDT gen3 switch driver now implements HW-specific error handler that
+ * issues soft port reset to the port to reset ERR_STOP bits and ackIDs.
 */
 static int rio_clr_err_stopped(struct rio_dev *rdev, u32 pnum, u32 err_status)
 {
@ -1085,10 +1096,10 @@ static int rio_clr_err_stopped(struct rio_dev *rdev, u32 pnum, u32 err_status)

 	if (err_status == 0)
 		rio_read_config_32(rdev,
-			rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(pnum),
+			RIO_DEV_PORT_N_ERR_STS_CSR(rdev, pnum),
 			&err_status);

-	if (err_status & RIO_PORT_N_ERR_STS_PW_OUT_ES) {
+	if (err_status & RIO_PORT_N_ERR_STS_OUT_ES) {
 		pr_debug("RIO_EM: servicing Output Error-Stopped state\n");
 		/*
 		 * Send a Link-Request/Input-Status control symbol
@ -1103,7 +1114,7 @@ static int rio_clr_err_stopped(struct rio_dev *rdev, u32 pnum, u32 err_status)
 		far_ackid = (regval & RIO_PORT_N_MNT_RSP_ASTAT) >> 5;
 		far_linkstat = regval & RIO_PORT_N_MNT_RSP_LSTAT;
 		rio_read_config_32(rdev,
-			rdev->phys_efptr + RIO_PORT_N_ACK_STS_CSR(pnum),
+			RIO_DEV_PORT_N_ACK_STS_CSR(rdev, pnum),
 			&regval);
 		pr_debug("RIO_EM: SP%d_ACK_STS_CSR=0x%08x\n", pnum, regval);
 		near_ackid = (regval & RIO_PORT_N_ACK_INBOUND) >> 24;
@ -1121,43 +1132,43 @@ static int rio_clr_err_stopped(struct rio_dev *rdev, u32 pnum, u32 err_status)
 			 * far inbound.
 			 */
 			rio_write_config_32(rdev,
-				rdev->phys_efptr + RIO_PORT_N_ACK_STS_CSR(pnum),
+				RIO_DEV_PORT_N_ACK_STS_CSR(rdev, pnum),
 				(near_ackid << 24) |
 					(far_ackid << 8) | far_ackid);
 			/* Align far outstanding/outbound ackIDs with
 			 * near inbound.
 			 */
 			far_ackid++;
-			if (nextdev)
-				rio_write_config_32(nextdev,
-					nextdev->phys_efptr +
-					RIO_PORT_N_ACK_STS_CSR(RIO_GET_PORT_NUM(nextdev->swpinfo)),
-					(far_ackid << 24) |
-					(near_ackid << 8) | near_ackid);
-			else
-				pr_debug("RIO_EM: Invalid nextdev pointer (NULL)\n");
+			if (!nextdev) {
+				pr_debug("RIO_EM: nextdev pointer == NULL\n");
+				goto rd_err;
+			}
+
+			rio_write_config_32(nextdev,
+				RIO_DEV_PORT_N_ACK_STS_CSR(nextdev,
+					RIO_GET_PORT_NUM(nextdev->swpinfo)),
+				(far_ackid << 24) |
+				(near_ackid << 8) | near_ackid);
 		}
 rd_err:
-		rio_read_config_32(rdev,
-			rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(pnum),
-			&err_status);
+		rio_read_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, pnum),
+				   &err_status);
 		pr_debug("RIO_EM: SP%d_ERR_STS_CSR=0x%08x\n", pnum, err_status);
 	}

-	if ((err_status & RIO_PORT_N_ERR_STS_PW_INP_ES) && nextdev) {
+	if ((err_status & RIO_PORT_N_ERR_STS_INP_ES) && nextdev) {
 		pr_debug("RIO_EM: servicing Input Error-Stopped state\n");
 		rio_get_input_status(nextdev,
 				     RIO_GET_PORT_NUM(nextdev->swpinfo), NULL);
 		udelay(50);

-		rio_read_config_32(rdev,
-			rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(pnum),
-			&err_status);
+		rio_read_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, pnum),
+				   &err_status);
 		pr_debug("RIO_EM: SP%d_ERR_STS_CSR=0x%08x\n", pnum, err_status);
 	}

-	return (err_status & (RIO_PORT_N_ERR_STS_PW_OUT_ES |
-			      RIO_PORT_N_ERR_STS_PW_INP_ES)) ? 1 : 0;
+	return (err_status & (RIO_PORT_N_ERR_STS_OUT_ES |
+			      RIO_PORT_N_ERR_STS_INP_ES)) ? 1 : 0;
 }

 /**
@ -1257,9 +1268,8 @@ int rio_inb_pwrite_handler(struct rio_mport *mport, union rio_pw_msg *pw_msg)
 	if (rdev->rswitch->ops && rdev->rswitch->ops->em_handle)
 		rdev->rswitch->ops->em_handle(rdev, portnum);

-	rio_read_config_32(rdev,
-			rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum),
-			&err_status);
+	rio_read_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum),
+			   &err_status);
 	pr_debug("RIO_PW: SP%d_ERR_STS_CSR=0x%08x\n", portnum, err_status);

 	if (err_status & RIO_PORT_N_ERR_STS_PORT_OK) {
@ -1276,8 +1286,8 @@ int rio_inb_pwrite_handler(struct rio_mport *mport, union rio_pw_msg *pw_msg)
 		 * Depending on the link partner state, two attempts
 		 * may be needed for successful recovery.
 		 */
-		if (err_status & (RIO_PORT_N_ERR_STS_PW_OUT_ES |
-				  RIO_PORT_N_ERR_STS_PW_INP_ES)) {
+		if (err_status & (RIO_PORT_N_ERR_STS_OUT_ES |
+				  RIO_PORT_N_ERR_STS_INP_ES)) {
 			if (rio_clr_err_stopped(rdev, portnum, err_status))
 				rio_clr_err_stopped(rdev, portnum, 0);
 		}
@ -1287,10 +1297,18 @@ int rio_inb_pwrite_handler(struct rio_mport *mport, union rio_pw_msg *pw_msg)
 			rdev->rswitch->port_ok &= ~(1 << portnum);
 			rio_set_port_lockout(rdev, portnum, 1);

+			if (rdev->phys_rmap == 1) {
 			rio_write_config_32(rdev,
-				rdev->phys_efptr +
-					RIO_PORT_N_ACK_STS_CSR(portnum),
+				RIO_DEV_PORT_N_ACK_STS_CSR(rdev, portnum),
 				RIO_PORT_N_ACK_CLEAR);
+			} else {
+				rio_write_config_32(rdev,
+					RIO_DEV_PORT_N_OB_ACK_CSR(rdev, portnum),
+					RIO_PORT_N_OB_ACK_CLEAR);
+				rio_write_config_32(rdev,
+					RIO_DEV_PORT_N_IB_ACK_CSR(rdev, portnum),
+					0);
+			}

 			/* Schedule Extraction Service */
 			pr_debug("RIO_PW: Device Extraction on [%s]-P%d\n",
@ -1319,9 +1337,8 @@ int rio_inb_pwrite_handler(struct rio_mport *mport, union rio_pw_msg *pw_msg)
 	}

 	/* Clear remaining error bits and Port-Write Pending bit */
-	rio_write_config_32(rdev,
-			rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum),
-			err_status);
+	rio_write_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum),
+			    err_status);

 	return 0;
 }
@ -1372,20 +1389,7 @@ EXPORT_SYMBOL_GPL(rio_mport_get_efb);
 * Tell if a device supports a given RapidIO capability.
 * Returns the offset of the requested extended feature
 * block within the device's RIO configuration space or
- * 0 in case the device does not support it.  Possible
- * values for @ftr:
- *
- * %RIO_EFB_PAR_EP_ID		LP/LVDS EP Devices
- *
- * %RIO_EFB_PAR_EP_REC_ID	LP/LVDS EP Recovery Devices
- *
- * %RIO_EFB_PAR_EP_FREE_ID	LP/LVDS EP Free Devices
- *
- * %RIO_EFB_SER_EP_ID		LP/Serial EP Devices
- *
- * %RIO_EFB_SER_EP_REC_ID	LP/Serial EP Recovery Devices
- *
- * %RIO_EFB_SER_EP_FREE_ID	LP/Serial EP Free Devices
+ * 0 in case the device does not support it.
 */
 u32
 rio_mport_get_feature(struct rio_mport * port, int local, u16 destid,
--- a/drivers/rapidio/rio.h
+++ b/drivers/rapidio/rio.h
@ -22,7 +22,7 @@
 extern u32 rio_mport_get_feature(struct rio_mport *mport, int local, u16 destid,
 				 u8 hopcount, int ftr);
 extern u32 rio_mport_get_physefb(struct rio_mport *port, int local,
-				 u16 destid, u8 hopcount);
+				 u16 destid, u8 hopcount, u32 *rmap);
 extern u32 rio_mport_get_efb(struct rio_mport *port, int local, u16 destid,
 			     u8 hopcount, u32 from);
 extern int rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid,
--- a/drivers/rapidio/switches/tsi57x.c
+++ b/drivers/rapidio/switches/tsi57x.c
@ -175,12 +175,10 @@ tsi57x_em_init(struct rio_dev *rdev)

 		/* Clear all pending interrupts */
 		rio_read_config_32(rdev,
-				rdev->phys_efptr +
-					RIO_PORT_N_ERR_STS_CSR(portnum),
+				RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum),
 				&regval);
 		rio_write_config_32(rdev,
-				rdev->phys_efptr +
-					RIO_PORT_N_ERR_STS_CSR(portnum),
+				RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum),
 				regval & 0x07120214);

 		rio_read_config_32(rdev,
@ -198,7 +196,7 @@ tsi57x_em_init(struct rio_dev *rdev)

 		/* Skip next (odd) port if the current port is in x4 mode */
 		rio_read_config_32(rdev,
-				rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
+				RIO_DEV_PORT_N_CTL_CSR(rdev, portnum),
 				&regval);
 		if ((regval & RIO_PORT_N_CTL_PWIDTH) == RIO_PORT_N_CTL_PWIDTH_4)
 			portnum++;
@ -221,23 +219,23 @@ tsi57x_em_handler(struct rio_dev *rdev, u8 portnum)
 	u32 regval;

 	rio_read_config_32(rdev,
-			rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum),
+			RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum),
 			&err_status);

 	if ((err_status & RIO_PORT_N_ERR_STS_PORT_OK) &&
-	    (err_status & (RIO_PORT_N_ERR_STS_PW_OUT_ES |
-			  RIO_PORT_N_ERR_STS_PW_INP_ES))) {
+	    (err_status & (RIO_PORT_N_ERR_STS_OUT_ES |
+			  RIO_PORT_N_ERR_STS_INP_ES))) {
 		/* Remove any queued packets by locking/unlocking port */
 		rio_read_config_32(rdev,
-			rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
+			RIO_DEV_PORT_N_CTL_CSR(rdev, portnum),
 			&regval);
 		if (!(regval & RIO_PORT_N_CTL_LOCKOUT)) {
 			rio_write_config_32(rdev,
-				rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
+				RIO_DEV_PORT_N_CTL_CSR(rdev, portnum),
 				regval | RIO_PORT_N_CTL_LOCKOUT);
 			udelay(50);
 			rio_write_config_32(rdev,
-				rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
+				RIO_DEV_PORT_N_CTL_CSR(rdev, portnum),
 				regval);
 		}

@ -245,7 +243,7 @@ tsi57x_em_handler(struct rio_dev *rdev, u8 portnum)
 		 * valid bit
 		 */
 		rio_read_config_32(rdev,
-			rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(portnum),
+			RIO_DEV_PORT_N_MNT_RSP_CSR(rdev, portnum),
 			&regval);

 		/* Send a Packet-Not-Accepted/Link-Request-Input-Status control
@ -259,8 +257,8 @@ tsi57x_em_handler(struct rio_dev *rdev, u8 portnum)
 			while (checkcount--) {
 				udelay(50);
 				rio_read_config_32(rdev,
-					rdev->phys_efptr +
-						RIO_PORT_N_MNT_RSP_CSR(portnum),
+					RIO_DEV_PORT_N_MNT_RSP_CSR(rdev,
+								   portnum),
 					&regval);
 				if (regval & RIO_PORT_N_MNT_RSP_RVAL)
 					goto exit_es;