Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Add Maglev hashing scheduler to IPVS, from Inju Song.

 2) Lots of new TC subsystem tests from Roman Mashak.

 3) Add TCP zero copy receive and fix delayed acks and autotuning with
    SO_RCVLOWAT, from Eric Dumazet.

 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard
    Brouer.

 5) Add ttl inherit support to vxlan, from Hangbin Liu.

 6) Properly separate ipv6 routes into their logically independant
    components. fib6_info for the routing table, and fib6_nh for sets of
    nexthops, which thus can be shared. From David Ahern.

 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP
    messages from XDP programs. From Nikita V. Shirokov.

 8) Lots of long overdue cleanups to the r8169 driver, from Heiner
    Kallweit.

 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau.

10) Add traffic condition monitoring to iwlwifi, from Luca Coelho.

11) Plumb extack down into fib_rules, from Roopa Prabhu.

12) Add Flower classifier offload support to igb, from Vinicius Costa
    Gomes.

13) Add UDP GSO support, from Willem de Bruijn.

14) Add documentation for eBPF helpers, from Quentin Monnet.

15) Add TLS tx offload to mlx5, from Ilya Lesokhin.

16) Allow applications to be given the number of bytes available to read
    on a socket via a control message returned from recvmsg(), from
    Soheil Hassas Yeganeh.

17) Add x86_32 eBPF JIT compiler, from Wang YanQing.

18) Add AF_XDP sockets, with zerocopy support infrastructure as well.
    From Björn Töpel.

19) Remove indirect load support from all of the BPF JITs and handle
    these operations in the verifier by translating them into native BPF
    instead. From Daniel Borkmann.

20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha.

21) Allow XDP programs to do lookups in the main kernel routing tables
    for forwarding. From David Ahern.

22) Allow drivers to store hardware state into an ELF section of kernel
    dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy.

23) Various RACK and loss detection improvements in TCP, from Yuchung
    Cheng.

24) Add TCP SACK compression, from Eric Dumazet.

25) Add User Mode Helper support and basic bpfilter infrastructure, from
    Alexei Starovoitov.

26) Support ports and protocol values in RTM_GETROUTE, from Roopa
    Prabhu.

27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard
    Brouer.

28) Add lots of forwarding selftests, from Petr Machata.

29) Add generic network device failover driver, from Sridhar Samudrala.

* ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits)
  strparser: Add __strp_unpause and use it in ktls.
  rxrpc: Fix terminal retransmission connection ID to include the channel
  net: hns3: Optimize PF CMDQ interrupt switching process
  net: hns3: Fix for VF mailbox receiving unknown message
  net: hns3: Fix for VF mailbox cannot receiving PF response
  bnx2x: use the right constant
  Revert "net: sched: cls: Fix offloading when ingress dev is vxlan"
  net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
  enic: fix UDP rss bits
  netdev-FAQ: clarify DaveM's position for stable backports
  rtnetlink: validate attributes in do_setlink()
  mlxsw: Add extack messages for port_{un, }split failures
  netdevsim: Add extack error message for devlink reload
  devlink: Add extack to reload and port_{un, }split operations
  net: metrics: add proper netlink validation
  ipmr: fix error path when ipmr_new_table fails
  ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
  net: hns3: remove unused hclgevf_cfg_func_mta_filter
  netfilter: provide udp*_lib_lookup for nf_tproxy
  qed*: Utilize FW 8.37.2.0
  ...

drivers/media/rc/Kconfig

@@ -25,6 +25,19 @@ config LIRC
 	   passes raw IR to and from userspace, which is needed for
 	   IR transmitting (aka "blasting") and for the lirc daemon.
 
+config BPF_LIRC_MODE2
+	bool "Support for eBPF programs attached to lirc devices"
+	depends on BPF_SYSCALL
+	depends on RC_CORE=y
+	depends on LIRC
+	help
+	   Allow attaching eBPF programs to a lirc device using the bpf(2)
+	   syscall command BPF_PROG_ATTACH. This is supported for raw IR
+	   receivers.
+
+	   These eBPF programs can be used to decode IR into scancodes, for
+	   IR protocols not supported by the kernel decoders.
+
 menuconfig RC_DECODERS
 	bool "Remote controller decoders"
 	depends on RC_CORE

drivers/media/rc/Makefile

@@ -5,6 +5,7 @@ obj-y += keymaps/
 obj-$(CONFIG_RC_CORE) += rc-core.o
 rc-core-y := rc-main.o rc-ir-raw.o
 rc-core-$(CONFIG_LIRC) += lirc_dev.o
+rc-core-$(CONFIG_BPF_LIRC_MODE2) += bpf-lirc.o
 obj-$(CONFIG_IR_NEC_DECODER) += ir-nec-decoder.o
 obj-$(CONFIG_IR_RC5_DECODER) += ir-rc5-decoder.o
 obj-$(CONFIG_IR_RC6_DECODER) += ir-rc6-decoder.o

drivers/media/rc/bpf-lirc.c

@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: GPL-2.0
+// bpf-lirc.c - handles bpf
+//
+// Copyright (C) 2018 Sean Young <[email protected]>
+
+#include <linux/bpf.h>
+#include <linux/filter.h>
+#include <linux/bpf_lirc.h>
+#include "rc-core-priv.h"
+
+/*
+ * BPF interface for raw IR
+ */
+const struct bpf_prog_ops lirc_mode2_prog_ops = {
+};
+
+BPF_CALL_1(bpf_rc_repeat, u32*, sample)
+{
+	struct ir_raw_event_ctrl *ctrl;
+
+	ctrl = container_of(sample, struct ir_raw_event_ctrl, bpf_sample);
+
+	rc_repeat(ctrl->dev);
+
+	return 0;
+}
+
+static const struct bpf_func_proto rc_repeat_proto = {
+	.func	   = bpf_rc_repeat,
+	.gpl_only  = true, /* rc_repeat is EXPORT_SYMBOL_GPL */
+	.ret_type  = RET_INTEGER,
+	.arg1_type = ARG_PTR_TO_CTX,
+};
+
+/*
+ * Currently rc-core does not support 64-bit scancodes, but there are many
+ * known protocols with more than 32 bits. So, define the interface as u64
+ * as a future-proof.
+ */
+BPF_CALL_4(bpf_rc_keydown, u32*, sample, u32, protocol, u64, scancode,
+	   u32, toggle)
+{
+	struct ir_raw_event_ctrl *ctrl;
+
+	ctrl = container_of(sample, struct ir_raw_event_ctrl, bpf_sample);
+
+	rc_keydown(ctrl->dev, protocol, scancode, toggle != 0);
+
+	return 0;
+}
+
+static const struct bpf_func_proto rc_keydown_proto = {
+	.func	   = bpf_rc_keydown,
+	.gpl_only  = true, /* rc_keydown is EXPORT_SYMBOL_GPL */
+	.ret_type  = RET_INTEGER,
+	.arg1_type = ARG_PTR_TO_CTX,
+	.arg2_type = ARG_ANYTHING,
+	.arg3_type = ARG_ANYTHING,
+	.arg4_type = ARG_ANYTHING,
+};
+
+static const struct bpf_func_proto *
+lirc_mode2_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
+{
+	switch (func_id) {
+	case BPF_FUNC_rc_repeat:
+		return &rc_repeat_proto;
+	case BPF_FUNC_rc_keydown:
+		return &rc_keydown_proto;
+	case BPF_FUNC_map_lookup_elem:
+		return &bpf_map_lookup_elem_proto;
+	case BPF_FUNC_map_update_elem:
+		return &bpf_map_update_elem_proto;
+	case BPF_FUNC_map_delete_elem:
+		return &bpf_map_delete_elem_proto;
+	case BPF_FUNC_ktime_get_ns:
+		return &bpf_ktime_get_ns_proto;
+	case BPF_FUNC_tail_call:
+		return &bpf_tail_call_proto;
+	case BPF_FUNC_get_prandom_u32:
+		return &bpf_get_prandom_u32_proto;
+	case BPF_FUNC_trace_printk:
+		if (capable(CAP_SYS_ADMIN))
+			return bpf_get_trace_printk_proto();
+		/* fall through */
+	default:
+		return NULL;
+	}
+}
+
+static bool lirc_mode2_is_valid_access(int off, int size,
+				       enum bpf_access_type type,
+				       const struct bpf_prog *prog,
+				       struct bpf_insn_access_aux *info)
+{
+	/* We have one field of u32 */
+	return type == BPF_READ && off == 0 && size == sizeof(u32);
+}
+
+const struct bpf_verifier_ops lirc_mode2_verifier_ops = {
+	.get_func_proto  = lirc_mode2_func_proto,
+	.is_valid_access = lirc_mode2_is_valid_access
+};
+
+#define BPF_MAX_PROGS 64
+
+static int lirc_bpf_attach(struct rc_dev *rcdev, struct bpf_prog *prog)
+{
+	struct bpf_prog_array __rcu *old_array;
+	struct bpf_prog_array *new_array;
+	struct ir_raw_event_ctrl *raw;
+	int ret;
+
+	if (rcdev->driver_type != RC_DRIVER_IR_RAW)
+		return -EINVAL;
+
+	ret = mutex_lock_interruptible(&ir_raw_handler_lock);
+	if (ret)
+		return ret;
+
+	raw = rcdev->raw;
+	if (!raw) {
+		ret = -ENODEV;
+		goto unlock;
+	}
+
+	if (raw->progs && bpf_prog_array_length(raw->progs) >= BPF_MAX_PROGS) {
+		ret = -E2BIG;
+		goto unlock;
+	}
+
+	old_array = raw->progs;
+	ret = bpf_prog_array_copy(old_array, NULL, prog, &new_array);
+	if (ret < 0)
+		goto unlock;
+
+	rcu_assign_pointer(raw->progs, new_array);
+	bpf_prog_array_free(old_array);
+
+unlock:
+	mutex_unlock(&ir_raw_handler_lock);
+	return ret;
+}
+
+static int lirc_bpf_detach(struct rc_dev *rcdev, struct bpf_prog *prog)
+{
+	struct bpf_prog_array __rcu *old_array;
+	struct bpf_prog_array *new_array;
+	struct ir_raw_event_ctrl *raw;
+	int ret;
+
+	if (rcdev->driver_type != RC_DRIVER_IR_RAW)
+		return -EINVAL;
+
+	ret = mutex_lock_interruptible(&ir_raw_handler_lock);
+	if (ret)
+		return ret;
+
+	raw = rcdev->raw;
+	if (!raw) {
+		ret = -ENODEV;
+		goto unlock;
+	}
+
+	old_array = raw->progs;
+	ret = bpf_prog_array_copy(old_array, prog, NULL, &new_array);
+	/*
+	 * Do not use bpf_prog_array_delete_safe() as we would end up
+	 * with a dummy entry in the array, and the we would free the
+	 * dummy in lirc_bpf_free()
+	 */
+	if (ret)
+		goto unlock;
+
+	rcu_assign_pointer(raw->progs, new_array);
+	bpf_prog_array_free(old_array);
+unlock:
+	mutex_unlock(&ir_raw_handler_lock);
+	return ret;
+}
+
+void lirc_bpf_run(struct rc_dev *rcdev, u32 sample)
+{
+	struct ir_raw_event_ctrl *raw = rcdev->raw;
+
+	raw->bpf_sample = sample;
+
+	if (raw->progs)
+		BPF_PROG_RUN_ARRAY(raw->progs, &raw->bpf_sample, BPF_PROG_RUN);
+}
+
+/*
+ * This should be called once the rc thread has been stopped, so there can be
+ * no concurrent bpf execution.
+ */
+void lirc_bpf_free(struct rc_dev *rcdev)
+{
+	struct bpf_prog **progs;
+
+	if (!rcdev->raw->progs)
+		return;
+
+	progs = rcu_dereference(rcdev->raw->progs)->progs;
+	while (*progs)
+		bpf_prog_put(*progs++);
+
+	bpf_prog_array_free(rcdev->raw->progs);
+}
+
+int lirc_prog_attach(const union bpf_attr *attr)
+{
+	struct bpf_prog *prog;
+	struct rc_dev *rcdev;
+	int ret;
+
+	if (attr->attach_flags)
+		return -EINVAL;
+
+	prog = bpf_prog_get_type(attr->attach_bpf_fd,
+				 BPF_PROG_TYPE_LIRC_MODE2);
+	if (IS_ERR(prog))
+		return PTR_ERR(prog);
+
+	rcdev = rc_dev_get_from_fd(attr->target_fd);
+	if (IS_ERR(rcdev)) {
+		bpf_prog_put(prog);
+		return PTR_ERR(rcdev);
+	}
+
+	ret = lirc_bpf_attach(rcdev, prog);
+	if (ret)
+		bpf_prog_put(prog);
+
+	put_device(&rcdev->dev);
+
+	return ret;
+}
+
+int lirc_prog_detach(const union bpf_attr *attr)
+{
+	struct bpf_prog *prog;
+	struct rc_dev *rcdev;
+	int ret;
+
+	if (attr->attach_flags)
+		return -EINVAL;
+
+	prog = bpf_prog_get_type(attr->attach_bpf_fd,
+				 BPF_PROG_TYPE_LIRC_MODE2);
+	if (IS_ERR(prog))
+		return PTR_ERR(prog);
+
+	rcdev = rc_dev_get_from_fd(attr->target_fd);
+	if (IS_ERR(rcdev)) {
+		bpf_prog_put(prog);
+		return PTR_ERR(rcdev);
+	}
+
+	ret = lirc_bpf_detach(rcdev, prog);
+
+	bpf_prog_put(prog);
+	put_device(&rcdev->dev);
+
+	return ret;
+}
+
+int lirc_prog_query(const union bpf_attr *attr, union bpf_attr __user *uattr)
+{
+	__u32 __user *prog_ids = u64_to_user_ptr(attr->query.prog_ids);
+	struct bpf_prog_array __rcu *progs;
+	struct rc_dev *rcdev;
+	u32 cnt, flags = 0;
+	int ret;
+
+	if (attr->query.query_flags)
+		return -EINVAL;
+
+	rcdev = rc_dev_get_from_fd(attr->query.target_fd);
+	if (IS_ERR(rcdev))
+		return PTR_ERR(rcdev);
+
+	if (rcdev->driver_type != RC_DRIVER_IR_RAW) {
+		ret = -EINVAL;
+		goto put;
+	}
+
+	ret = mutex_lock_interruptible(&ir_raw_handler_lock);
+	if (ret)
+		goto put;
+
+	progs = rcdev->raw->progs;
+	cnt = progs ? bpf_prog_array_length(progs) : 0;
+
+	if (copy_to_user(&uattr->query.prog_cnt, &cnt, sizeof(cnt))) {
+		ret = -EFAULT;
+		goto unlock;
+	}
+
+	if (copy_to_user(&uattr->query.attach_flags, &flags, sizeof(flags))) {
+		ret = -EFAULT;
+		goto unlock;
+	}
+
+	if (attr->query.prog_cnt != 0 && prog_ids && cnt)
+		ret = bpf_prog_array_copy_to_user(progs, prog_ids, cnt);
+
+unlock:
+	mutex_unlock(&ir_raw_handler_lock);
+put:
+	put_device(&rcdev->dev);
+
+	return ret;
+}

drivers/media/rc/lirc_dev.c

@@ -20,6 +20,7 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/device.h>
+#include <linux/file.h>
 #include <linux/idr.h>
 #include <linux/poll.h>
 #include <linux/sched.h>
@@ -104,6 +105,12 @@ void ir_lirc_raw_event(struct rc_dev *dev, struct ir_raw_event ev)
 			TO_US(ev.duration), TO_STR(ev.pulse));
 	}
 
+	/*
+	 * bpf does not care about the gap generated above; that exists
+	 * for backwards compatibility
+	 */
+	lirc_bpf_run(dev, sample);
+
 	spin_lock_irqsave(&dev->lirc_fh_lock, flags);
 	list_for_each_entry(fh, &dev->lirc_fh, list) {
 		if (LIRC_IS_TIMEOUT(sample) && !fh->send_timeout_reports)
@@ -816,4 +823,27 @@ void __exit lirc_dev_exit(void)
 	unregister_chrdev_region(lirc_base_dev, RC_DEV_MAX);
 }
 
+struct rc_dev *rc_dev_get_from_fd(int fd)
+{
+	struct fd f = fdget(fd);
+	struct lirc_fh *fh;
+	struct rc_dev *dev;
+
+	if (!f.file)
+		return ERR_PTR(-EBADF);
+
+	if (f.file->f_op != &lirc_fops) {
+		fdput(f);
+		return ERR_PTR(-EINVAL);
+	}
+
+	fh = f.file->private_data;
+	dev = fh->rc;
+
+	get_device(&dev->dev);
+	fdput(f);
+
+	return dev;
+}
+
 MODULE_ALIAS("lirc_dev");

drivers/media/rc/rc-core-priv.h

@@ -13,6 +13,7 @@
 #define	MAX_IR_EVENT_SIZE	512
 
 #include <linux/slab.h>
+#include <uapi/linux/bpf.h>
 #include <media/rc-core.h>
 
 /**
@@ -57,6 +58,11 @@ struct ir_raw_event_ctrl {
 	/* raw decoder state follows */
 	struct ir_raw_event prev_ev;
 	struct ir_raw_event this_ev;
+
+#ifdef CONFIG_BPF_LIRC_MODE2
+	u32				bpf_sample;
+	struct bpf_prog_array __rcu	*progs;
+#endif
 	struct nec_dec {
 		int state;
 		unsigned count;
@@ -126,6 +132,9 @@ struct ir_raw_event_ctrl {
 	} imon;
 };
 
+/* Mutex for locking raw IR processing and handler change */
+extern struct mutex ir_raw_handler_lock;
+
 /* macros for IR decoders */
 static inline bool geq_margin(unsigned d1, unsigned d2, unsigned margin)
 {
@@ -288,6 +297,7 @@ void ir_lirc_raw_event(struct rc_dev *dev, struct ir_raw_event ev);
 void ir_lirc_scancode_event(struct rc_dev *dev, struct lirc_scancode *lsc);
 int ir_lirc_register(struct rc_dev *dev);
 void ir_lirc_unregister(struct rc_dev *dev);
+struct rc_dev *rc_dev_get_from_fd(int fd);
 #else
 static inline int lirc_dev_init(void) { return 0; }
 static inline void lirc_dev_exit(void) {}
@@ -299,4 +309,15 @@ static inline int ir_lirc_register(struct rc_dev *dev) { return 0; }
 static inline void ir_lirc_unregister(struct rc_dev *dev) { }
 #endif
 
+/*
+ * bpf interface
+ */
+#ifdef CONFIG_BPF_LIRC_MODE2
+void lirc_bpf_free(struct rc_dev *dev);
+void lirc_bpf_run(struct rc_dev *dev, u32 sample);
+#else
+static inline void lirc_bpf_free(struct rc_dev *dev) { }
+static inline void lirc_bpf_run(struct rc_dev *dev, u32 sample) { }
+#endif
+
 #endif /* _RC_CORE_PRIV */

drivers/media/rc/rc-ir-raw.c

@@ -14,7 +14,7 @@
 static LIST_HEAD(ir_raw_client_list);
 
 /* Used to handle IR raw handler extensions */
-static DEFINE_MUTEX(ir_raw_handler_lock);
+DEFINE_MUTEX(ir_raw_handler_lock);
 static LIST_HEAD(ir_raw_handler_list);
 static atomic64_t available_protocols = ATOMIC64_INIT(0);
 
@@ -621,9 +621,17 @@ void ir_raw_event_unregister(struct rc_dev *dev)
 	list_for_each_entry(handler, &ir_raw_handler_list, list)
 		if (handler->raw_unregister)
 			handler->raw_unregister(dev);
-	mutex_unlock(&ir_raw_handler_lock);
+
+	lirc_bpf_free(dev);
 
 	ir_raw_event_free(dev);
+
+	/*
+	 * A user can be calling bpf(BPF_PROG_{QUERY|ATTACH|DETACH}), so
+	 * ensure that the raw member is null on unlock; this is how
+	 * "device gone" is checked.
+	 */
+	mutex_unlock(&ir_raw_handler_lock);
 }
 
 /*