Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

include/asm-m68knommu/MC68332.h

@@ -0,0 +1,152 @@
+
+/* include/asm-m68knommu/MC68332.h: '332 control registers
+ *
+ * Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>,
+ *
+ */
+
+#ifndef _MC68332_H_
+#define _MC68332_H_
+
+#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
+#define WORD_REF(addr) (*((volatile unsigned short*)addr))
+
+#define PORTE_ADDR	0xfffa11
+#define PORTE	BYTE_REF(PORTE_ADDR)
+#define DDRE_ADDR	0xfffa15
+#define DDRE	BYTE_REF(DDRE_ADDR)
+#define PEPAR_ADDR	0xfffa17
+#define PEPAR	BYTE_REF(PEPAR_ADDR)
+
+#define PORTF_ADDR	0xfffa19
+#define PORTF	BYTE_REF(PORTF_ADDR)
+#define DDRF_ADDR	0xfffa1d
+#define DDRF	BYTE_REF(DDRF_ADDR)
+#define PFPAR_ADDR	0xfffa1f
+#define PFPAR	BYTE_REF(PFPAR_ADDR)
+
+#define PORTQS_ADDR	0xfffc15
+#define PORTQS	BYTE_REF(PORTQS_ADDR)
+#define DDRQS_ADDR	0xfffc17
+#define DDRQS	BYTE_REF(DDRQS_ADDR)
+#define PQSPAR_ADDR	0xfffc16
+#define PQSPAR	BYTE_REF(PQSPAR_ADDR)
+
+#define CSPAR0_ADDR 0xFFFA44
+#define CSPAR0 WORD_REF(CSPAR0_ADDR)
+#define CSPAR1_ADDR 0xFFFA46
+#define CSPAR1 WORD_REF(CSPAR1_ADDR)
+#define CSARBT_ADDR 0xFFFA48
+#define CSARBT WORD_REF(CSARBT_ADDR)
+#define CSOPBT_ADDR 0xFFFA4A
+#define CSOPBT WORD_REF(CSOPBT_ADDR)
+#define CSBAR0_ADDR 0xFFFA4C
+#define CSBAR0 WORD_REF(CSBAR0_ADDR)
+#define CSOR0_ADDR 0xFFFA4E
+#define CSOR0 WORD_REF(CSOR0_ADDR)
+#define CSBAR1_ADDR 0xFFFA50
+#define CSBAR1 WORD_REF(CSBAR1_ADDR)
+#define CSOR1_ADDR 0xFFFA52
+#define CSOR1 WORD_REF(CSOR1_ADDR)
+#define CSBAR2_ADDR 0xFFFA54
+#define CSBAR2 WORD_REF(CSBAR2_ADDR)
+#define CSOR2_ADDR 0xFFFA56
+#define CSOR2 WORD_REF(CSOR2_ADDR)
+#define CSBAR3_ADDR 0xFFFA58
+#define CSBAR3 WORD_REF(CSBAR3_ADDR)
+#define CSOR3_ADDR 0xFFFA5A
+#define CSOR3 WORD_REF(CSOR3_ADDR)
+#define CSBAR4_ADDR 0xFFFA5C
+#define CSBAR4 WORD_REF(CSBAR4_ADDR)
+#define CSOR4_ADDR 0xFFFA5E
+#define CSOR4 WORD_REF(CSOR4_ADDR)
+#define CSBAR5_ADDR 0xFFFA60
+#define CSBAR5 WORD_REF(CSBAR5_ADDR)
+#define CSOR5_ADDR 0xFFFA62
+#define CSOR5 WORD_REF(CSOR5_ADDR)
+#define CSBAR6_ADDR 0xFFFA64
+#define CSBAR6 WORD_REF(CSBAR6_ADDR)
+#define CSOR6_ADDR 0xFFFA66
+#define CSOR6 WORD_REF(CSOR6_ADDR)
+#define CSBAR7_ADDR 0xFFFA68
+#define CSBAR7 WORD_REF(CSBAR7_ADDR)
+#define CSOR7_ADDR 0xFFFA6A
+#define CSOR7 WORD_REF(CSOR7_ADDR)
+#define CSBAR8_ADDR 0xFFFA6C
+#define CSBAR8 WORD_REF(CSBAR8_ADDR)
+#define CSOR8_ADDR 0xFFFA6E
+#define CSOR8 WORD_REF(CSOR8_ADDR)
+#define CSBAR9_ADDR 0xFFFA70
+#define CSBAR9 WORD_REF(CSBAR9_ADDR)
+#define CSOR9_ADDR 0xFFFA72
+#define CSOR9 WORD_REF(CSOR9_ADDR)
+#define CSBAR10_ADDR 0xFFFA74
+#define CSBAR10 WORD_REF(CSBAR10_ADDR)
+#define CSOR10_ADDR 0xFFFA76
+#define CSOR10 WORD_REF(CSOR10_ADDR)
+
+#define CSOR_MODE_ASYNC	0x0000
+#define CSOR_MODE_SYNC	0x8000
+#define CSOR_MODE_MASK	0x8000
+#define CSOR_BYTE_DISABLE	0x0000
+#define CSOR_BYTE_UPPER		0x4000
+#define CSOR_BYTE_LOWER		0x2000
+#define CSOR_BYTE_BOTH		0x6000
+#define CSOR_BYTE_MASK		0x6000
+#define CSOR_RW_RSVD		0x0000
+#define CSOR_RW_READ		0x0800
+#define CSOR_RW_WRITE		0x1000
+#define CSOR_RW_BOTH		0x1800
+#define CSOR_RW_MASK		0x1800
+#define CSOR_STROBE_DS		0x0400
+#define CSOR_STROBE_AS		0x0000
+#define CSOR_STROBE_MASK	0x0400
+#define CSOR_DSACK_WAIT(x)	(wait << 6)
+#define CSOR_DSACK_FTERM	(14 << 6)
+#define CSOR_DSACK_EXTERNAL	(15 << 6)
+#define CSOR_DSACK_MASK		0x03c0
+#define CSOR_SPACE_CPU		0x0000
+#define CSOR_SPACE_USER		0x0010
+#define CSOR_SPACE_SU		0x0020
+#define CSOR_SPACE_BOTH		0x0030
+#define CSOR_SPACE_MASK		0x0030
+#define CSOR_IPL_ALL		0x0000
+#define CSOR_IPL_PRIORITY(x)	(x << 1)
+#define CSOR_IPL_MASK		0x000e
+#define CSOR_AVEC_ON		0x0001
+#define CSOR_AVEC_OFF		0x0000
+#define CSOR_AVEC_MASK		0x0001
+
+#define CSBAR_ADDR(x)		((addr >> 11) << 3) 
+#define CSBAR_ADDR_MASK		0xfff8
+#define CSBAR_BLKSIZE_2K	0x0000
+#define CSBAR_BLKSIZE_8K	0x0001
+#define CSBAR_BLKSIZE_16K	0x0002
+#define CSBAR_BLKSIZE_64K	0x0003
+#define CSBAR_BLKSIZE_128K	0x0004
+#define CSBAR_BLKSIZE_256K	0x0005
+#define CSBAR_BLKSIZE_512K	0x0006
+#define CSBAR_BLKSIZE_1M	0x0007
+#define CSBAR_BLKSIZE_MASK	0x0007
+
+#define CSPAR_DISC	0
+#define CSPAR_ALT	1
+#define CSPAR_CS8	2
+#define CSPAR_CS16	3
+#define CSPAR_MASK	3
+
+#define CSPAR0_CSBOOT(x) (x << 0)
+#define CSPAR0_CS0(x)	(x << 2)
+#define CSPAR0_CS1(x)	(x << 4)
+#define CSPAR0_CS2(x)	(x << 6)
+#define CSPAR0_CS3(x)	(x << 8)
+#define CSPAR0_CS4(x)	(x << 10)
+#define CSPAR0_CS5(x)	(x << 12)
+
+#define CSPAR1_CS6(x)	(x << 0)
+#define CSPAR1_CS7(x)	(x << 2)
+#define CSPAR1_CS8(x)	(x << 4)
+#define CSPAR1_CS9(x)	(x << 6)
+#define CSPAR1_CS10(x)	(x << 8)
+
+#endif

include/asm-m68knommu/a.out.h

@@ -0,0 +1 @@
+#include <asm-m68k/a.out.h>

include/asm-m68knommu/anchor.h

@@ -0,0 +1,112 @@
+/****************************************************************************/
+
+/*
+ *	anchor.h -- Anchor CO-MEM Lite PCI host bridge part.
+ *
+ *	(C) Copyright 2000, Moreton Bay (www.moreton.com.au)
+ */
+
+/****************************************************************************/
+#ifndef	anchor_h
+#define	anchor_h
+/****************************************************************************/
+
+/*
+ *	Define basic addressing info.
+ */
+#if defined(CONFIG_MOTOROLA) && defined(CONFIG_M5407)
+#define	COMEM_BASE	0xFFFF0000	/* Base of CO-MEM address space */
+#define	COMEM_IRQ	25		/* IRQ of anchor part */
+#else
+#define	COMEM_BASE	0x80000000	/* Base of CO-MEM address space */
+#define	COMEM_IRQ	25		/* IRQ of anchor part */
+#endif
+
+/****************************************************************************/
+
+/*
+ *	4-byte registers of CO-MEM, so adjust register addresses for
+ *	easy access. Handy macro for word access too.
+ */
+#define	LREG(a)		((a) >> 2)
+#define	WREG(a)		((a) >> 1)
+
+
+/*
+ *	Define base addresses within CO-MEM Lite register address space.
+ */
+#define	COMEM_I2O	0x0000		/* I2O registers */
+#define	COMEM_OPREGS	0x0400		/* Operation registers */
+#define	COMEM_PCIBUS	0x2000		/* Direct access to PCI bus */
+#define	COMEM_SHMEM	0x4000		/* Shared memory region */
+
+#define	COMEM_SHMEMSIZE	0x4000		/* Size of shared memory */
+
+
+/*
+ *	Define CO-MEM Registers.
+ */
+#define	COMEM_I2OHISR	0x0030		/* I2O host interrupt status */
+#define	COMEM_I2OHIMR	0x0034		/* I2O host interrupt mask */
+#define	COMEM_I2OLISR	0x0038		/* I2O local interrupt status */
+#define	COMEM_I2OLIMR	0x003c		/* I2O local interrupt mask */
+#define	COMEM_IBFPFIFO	0x0040		/* I2O inbound free/post FIFO */
+#define	COMEM_OBPFFIFO	0x0044		/* I2O outbound post/free FIFO */
+#define	COMEM_IBPFFIFO	0x0048		/* I2O inbound post/free FIFO */
+#define	COMEM_OBFPFIFO	0x004c		/* I2O outbound free/post FIFO */
+
+#define	COMEM_DAHBASE	0x0460		/* Direct access base address */
+
+#define	COMEM_NVCMD	0x04a0		/* I2C serial command */
+#define	COMEM_NVREAD	0x04a4		/* I2C serial read */
+#define	COMEM_NVSTAT	0x04a8		/* I2C status */
+
+#define	COMEM_DMALBASE	0x04b0		/* DMA local base address */
+#define	COMEM_DMAHBASE	0x04b4		/* DMA host base address */
+#define	COMEM_DMASIZE	0x04b8		/* DMA size */
+#define	COMEM_DMACTL	0x04bc		/* DMA control */
+
+#define	COMEM_HCTL	0x04e0		/* Host control */
+#define	COMEM_HINT	0x04e4		/* Host interrupt control/status */
+#define	COMEM_HLDATA	0x04e8		/* Host to local data mailbox */
+#define	COMEM_LINT	0x04f4		/* Local interrupt contole status */
+#define	COMEM_LHDATA	0x04f8		/* Local to host data mailbox */
+
+#define	COMEM_LBUSCFG	0x04fc		/* Local bus configuration */
+
+
+/*
+ *	Commands and flags for use with Direct Access Register.
+ */
+#define	COMEM_DA_IACK	0x00000000	/* Interrupt acknowledge (read) */
+#define	COMEM_DA_SPCL	0x00000010	/* Special cycle (write) */
+#define	COMEM_DA_MEMRD	0x00000004	/* Memory read cycle */
+#define	COMEM_DA_MEMWR	0x00000004	/* Memory write cycle */
+#define	COMEM_DA_IORD	0x00000002	/* I/O read cycle */
+#define	COMEM_DA_IOWR	0x00000002	/* I/O write cycle */
+#define	COMEM_DA_CFGRD	0x00000006	/* Configuration read cycle */
+#define	COMEM_DA_CFGWR	0x00000006	/* Configuration write cycle */
+
+#define	COMEM_DA_ADDR(a)	((a) & 0xffffe000)
+
+#define	COMEM_DA_OFFSET(a)	((a) & 0x00001fff)
+
+
+/*
+ *	The PCI bus will be limited in what slots will actually be used.
+ *	Define valid device numbers for different boards.
+ */
+#if defined(CONFIG_MOTOROLA) && defined(CONFIG_M5407)
+#define	COMEM_MINDEV	14		/* Minimum valid DEVICE */
+#define	COMEM_MAXDEV	14		/* Maximum valid DEVICE */
+#define	COMEM_BRIDGEDEV	15		/* Slot bridge is in */
+#else
+#define	COMEM_MINDEV	0		/* Minimum valid DEVICE */
+#define	COMEM_MAXDEV	3		/* Maximum valid DEVICE */
+#endif
+
+#define	COMEM_MAXPCI	(COMEM_MAXDEV+1)	/* Maximum PCI devices */
+
+
+/****************************************************************************/
+#endif	/* anchor_h */

include/asm-m68knommu/asm-offsets.h

@@ -0,0 +1,49 @@
+#ifndef __ASM_OFFSETS_H__
+#define __ASM_OFFSETS_H__
+/*
+ * DO NOT MODIFY.
+ *
+ * This file was generated by arch/m68knommu/Makefile
+ *
+ */
+
+#define TASK_STATE 0 /* offsetof(struct task_struct, state) */
+#define TASK_FLAGS 12 /* offsetof(struct task_struct, flags) */
+#define TASK_PTRACE 16 /* offsetof(struct task_struct, ptrace) */
+#define TASK_BLOCKED 922 /* offsetof(struct task_struct, blocked) */
+#define TASK_THREAD 772 /* offsetof(struct task_struct, thread) */
+#define TASK_THREAD_INFO 4 /* offsetof(struct task_struct, thread_info) */
+#define TASK_MM 92 /* offsetof(struct task_struct, mm) */
+#define TASK_ACTIVE_MM 96 /* offsetof(struct task_struct, active_mm) */
+#define CPUSTAT_SOFTIRQ_PENDING 0 /* offsetof(irq_cpustat_t, __softirq_pending) */
+#define THREAD_KSP 0 /* offsetof(struct thread_struct, ksp) */
+#define THREAD_USP 4 /* offsetof(struct thread_struct, usp) */
+#define THREAD_SR 8 /* offsetof(struct thread_struct, sr) */
+#define THREAD_FS 10 /* offsetof(struct thread_struct, fs) */
+#define THREAD_CRP 12 /* offsetof(struct thread_struct, crp) */
+#define THREAD_ESP0 20 /* offsetof(struct thread_struct, esp0) */
+#define THREAD_FPREG 24 /* offsetof(struct thread_struct, fp) */
+#define THREAD_FPCNTL 120 /* offsetof(struct thread_struct, fpcntl) */
+#define THREAD_FPSTATE 132 /* offsetof(struct thread_struct, fpstate) */
+#define PT_D0 32 /* offsetof(struct pt_regs, d0) */
+#define PT_ORIG_D0 36 /* offsetof(struct pt_regs, orig_d0) */
+#define PT_D1 0 /* offsetof(struct pt_regs, d1) */
+#define PT_D2 4 /* offsetof(struct pt_regs, d2) */
+#define PT_D3 8 /* offsetof(struct pt_regs, d3) */
+#define PT_D4 12 /* offsetof(struct pt_regs, d4) */
+#define PT_D5 16 /* offsetof(struct pt_regs, d5) */
+#define PT_A0 20 /* offsetof(struct pt_regs, a0) */
+#define PT_A1 24 /* offsetof(struct pt_regs, a1) */
+#define PT_A2 28 /* offsetof(struct pt_regs, a2) */
+#define PT_PC 48 /* offsetof(struct pt_regs, pc) */
+#define PT_SR 46 /* offsetof(struct pt_regs, sr) */
+#define PT_VECTOR 52 /* offsetof(struct pt_regs, pc) + 4 */
+#define STAT_IRQ 5140 /* offsetof(struct kernel_stat, irqs) */
+#define SIGSEGV 11 /* SIGSEGV */
+#define SEGV_MAPERR 196609 /* SEGV_MAPERR */
+#define SIGTRAP 5 /* SIGTRAP */
+#define TRAP_TRACE 196610 /* TRAP_TRACE */
+#define PT_PTRACED 1 /* PT_PTRACED */
+#define PT_DTRACE 2 /* PT_DTRACE */
+
+#endif

include/asm-m68knommu/atomic.h

@@ -0,0 +1,134 @@
+#ifndef __ARCH_M68KNOMMU_ATOMIC__
+#define __ARCH_M68KNOMMU_ATOMIC__
+
+#include <asm/system.h>	/* local_irq_XXX() */
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ */
+
+/*
+ * We do not have SMP m68k systems, so we don't have to deal with that.
+ */
+
+typedef struct { int counter; } atomic_t;
+#define ATOMIC_INIT(i)	{ (i) }
+
+#define atomic_read(v)		((v)->counter)
+#define atomic_set(v, i)	(((v)->counter) = i)
+
+static __inline__ void atomic_add(int i, atomic_t *v)
+{
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__("addl %1,%0" : "+m" (*v) : "d" (i));
+#else
+	__asm__ __volatile__("addl %1,%0" : "+m" (*v) : "di" (i));
+#endif
+}
+
+static __inline__ void atomic_sub(int i, atomic_t *v)
+{
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__("subl %1,%0" : "+m" (*v) : "d" (i));
+#else
+	__asm__ __volatile__("subl %1,%0" : "+m" (*v) : "di" (i));
+#endif
+}
+
+static __inline__ int atomic_sub_and_test(int i, atomic_t * v)
+{
+	char c;
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__("subl %2,%1; seq %0"
+			     : "=d" (c), "+m" (*v)
+			     : "d" (i));
+#else
+	__asm__ __volatile__("subl %2,%1; seq %0"
+			     : "=d" (c), "+m" (*v)
+			     : "di" (i));
+#endif
+	return c != 0;
+}
+
+static __inline__ void atomic_inc(volatile atomic_t *v)
+{
+	__asm__ __volatile__("addql #1,%0" : "+m" (*v));
+}
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+
+static __inline__ int atomic_inc_and_test(volatile atomic_t *v)
+{
+	char c;
+	__asm__ __volatile__("addql #1,%1; seq %0" : "=d" (c), "+m" (*v));
+	return c != 0;
+}
+
+static __inline__ void atomic_dec(volatile atomic_t *v)
+{
+	__asm__ __volatile__("subql #1,%0" : "+m" (*v));
+}
+
+static __inline__ int atomic_dec_and_test(volatile atomic_t *v)
+{
+	char c;
+	__asm__ __volatile__("subql #1,%1; seq %0" : "=d" (c), "+m" (*v));
+	return c != 0;
+}
+
+static __inline__ void atomic_clear_mask(unsigned long mask, unsigned long *v)
+{
+	__asm__ __volatile__("andl %1,%0" : "+m" (*v) : "id" (~(mask)));
+}
+
+static __inline__ void atomic_set_mask(unsigned long mask, unsigned long *v)
+{
+	__asm__ __volatile__("orl %1,%0" : "+m" (*v) : "id" (mask));
+}
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec()    barrier()
+#define smp_mb__after_atomic_dec() barrier()
+#define smp_mb__before_atomic_inc()    barrier()
+#define smp_mb__after_atomic_inc() barrier()
+
+extern __inline__ int atomic_add_return(int i, atomic_t * v)
+{
+	unsigned long temp, flags;
+
+	local_irq_save(flags);
+	temp = *(long *)v;
+	temp += i;
+	*(long *)v = temp;
+	local_irq_restore(flags);
+
+	return temp;
+}
+
+#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
+
+extern __inline__ int atomic_sub_return(int i, atomic_t * v)
+{
+	unsigned long temp, flags;
+
+	local_irq_save(flags);
+	temp = *(long *)v;
+	temp -= i;
+	*(long *)v = temp;
+	local_irq_restore(flags);
+
+	return temp;
+}
+
+#define atomic_dec_return(v) atomic_sub_return(1,(v))
+#define atomic_inc_return(v) atomic_add_return(1,(v))
+
+#endif /* __ARCH_M68KNOMMU_ATOMIC __ */

include/asm-m68knommu/bitops.h

@@ -0,0 +1,503 @@
+#ifndef _M68KNOMMU_BITOPS_H
+#define _M68KNOMMU_BITOPS_H
+
+/*
+ * Copyright 1992, Linus Torvalds.
+ */
+
+#include <linux/config.h>
+#include <linux/compiler.h>
+#include <asm/byteorder.h>	/* swab32 */
+#include <asm/system.h>		/* save_flags */
+
+#ifdef __KERNEL__
+
+/*
+ *	Generic ffs().
+ */
+static inline int ffs(int x)
+{
+	int r = 1;
+
+	if (!x)
+		return 0;
+	if (!(x & 0xffff)) {
+		x >>= 16;
+		r += 16;
+	}
+	if (!(x & 0xff)) {
+		x >>= 8;
+		r += 8;
+	}
+	if (!(x & 0xf)) {
+		x >>= 4;
+		r += 4;
+	}
+	if (!(x & 3)) {
+		x >>= 2;
+		r += 2;
+	}
+	if (!(x & 1)) {
+		x >>= 1;
+		r += 1;
+	}
+	return r;
+}
+
+/*
+ *	Generic __ffs().
+ */
+static inline int __ffs(int x)
+{
+	int r = 0;
+
+	if (!x)
+		return 0;
+	if (!(x & 0xffff)) {
+		x >>= 16;
+		r += 16;
+	}
+	if (!(x & 0xff)) {
+		x >>= 8;
+		r += 8;
+	}
+	if (!(x & 0xf)) {
+		x >>= 4;
+		r += 4;
+	}
+	if (!(x & 3)) {
+		x >>= 2;
+		r += 2;
+	}
+	if (!(x & 1)) {
+		x >>= 1;
+		r += 1;
+	}
+	return r;
+}
+
+/*
+ * Every architecture must define this function. It's the fastest
+ * way of searching a 140-bit bitmap where the first 100 bits are
+ * unlikely to be set. It's guaranteed that at least one of the 140
+ * bits is cleared.
+ */
+static inline int sched_find_first_bit(unsigned long *b)
+{
+	if (unlikely(b[0]))
+		return __ffs(b[0]);
+	if (unlikely(b[1]))
+		return __ffs(b[1]) + 32;
+	if (unlikely(b[2]))
+		return __ffs(b[2]) + 64;
+	if (b[3])
+		return __ffs(b[3]) + 96;
+	return __ffs(b[4]) + 128;
+}
+
+/*
+ * ffz = Find First Zero in word. Undefined if no zero exists,
+ * so code should check against ~0UL first..
+ */
+static __inline__ unsigned long ffz(unsigned long word)
+{
+	unsigned long result = 0;
+
+	while(word & 1) {
+		result++;
+		word >>= 1;
+	}
+	return result;
+}
+
+
+static __inline__ void set_bit(int nr, volatile unsigned long * addr)
+{
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %0,%%a0; bset %1,(%%a0)"
+	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "d" (nr)
+	     : "%a0", "cc");
+#else
+	__asm__ __volatile__ ("bset %1,%0"
+	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "di" (nr)
+	     : "cc");
+#endif
+}
+
+#define __set_bit(nr, addr) set_bit(nr, addr)
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit()	barrier()
+#define smp_mb__after_clear_bit()	barrier()
+
+static __inline__ void clear_bit(int nr, volatile unsigned long * addr)
+{
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %0,%%a0; bclr %1,(%%a0)"
+	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "d" (nr)
+	     : "%a0", "cc");
+#else
+	__asm__ __volatile__ ("bclr %1,%0"
+	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "di" (nr)
+	     : "cc");
+#endif
+}
+
+#define __clear_bit(nr, addr) clear_bit(nr, addr)
+
+static __inline__ void change_bit(int nr, volatile unsigned long * addr)
+{
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %0,%%a0; bchg %1,(%%a0)"
+	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "d" (nr)
+	     : "%a0", "cc");
+#else
+	__asm__ __volatile__ ("bchg %1,%0"
+	     : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "di" (nr)
+	     : "cc");
+#endif
+}
+
+#define __change_bit(nr, addr) change_bit(nr, addr)
+
+static __inline__ int test_and_set_bit(int nr, volatile unsigned long * addr)
+{
+	char retval;
+
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "d" (nr)
+	     : "%a0");
+#else
+	__asm__ __volatile__ ("bset %2,%1; sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "di" (nr)
+	     /* No clobber */);
+#endif
+
+	return retval;
+}
+
+#define __test_and_set_bit(nr, addr) test_and_set_bit(nr, addr)
+
+static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * addr)
+{
+	char retval;
+
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "d" (nr)
+	     : "%a0");
+#else
+	__asm__ __volatile__ ("bclr %2,%1; sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "di" (nr)
+	     /* No clobber */);
+#endif
+
+	return retval;
+}
+
+#define __test_and_clear_bit(nr, addr) test_and_clear_bit(nr, addr)
+
+static __inline__ int test_and_change_bit(int nr, volatile unsigned long * addr)
+{
+	char retval;
+
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %1,%%a0\n\tbchg %2,(%%a0)\n\tsne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "d" (nr)
+	     : "%a0");
+#else
+	__asm__ __volatile__ ("bchg %2,%1; sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+	     : "di" (nr)
+	     /* No clobber */);
+#endif
+
+	return retval;
+}
+
+#define __test_and_change_bit(nr, addr) test_and_change_bit(nr, addr)
+
+/*
+ * This routine doesn't need to be atomic.
+ */
+static __inline__ int __constant_test_bit(int nr, const volatile unsigned long * addr)
+{
+	return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0;
+}
+
+static __inline__ int __test_bit(int nr, const volatile unsigned long * addr)
+{
+	int 	* a = (int *) addr;
+	int	mask;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	return ((mask & *a) != 0);
+}
+
+#define test_bit(nr,addr) \
+(__builtin_constant_p(nr) ? \
+ __constant_test_bit((nr),(addr)) : \
+ __test_bit((nr),(addr)))
+
+#define find_first_zero_bit(addr, size) \
+        find_next_zero_bit((addr), (size), 0)
+#define find_first_bit(addr, size) \
+        find_next_bit((addr), (size), 0)
+
+static __inline__ int find_next_zero_bit (void * addr, int size, int offset)
+{
+	unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
+	unsigned long result = offset & ~31UL;
+	unsigned long tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if (offset) {
+		tmp = *(p++);
+		tmp |= ~0UL >> (32-offset);
+		if (size < 32)
+			goto found_first;
+		if (~tmp)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while (size & ~31UL) {
+		if (~(tmp = *(p++)))
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if (!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	tmp |= ~0UL >> size;
+found_middle:
+	return result + ffz(tmp);
+}
+
+/*
+ * Find next one bit in a bitmap reasonably efficiently.
+ */
+static __inline__ unsigned long find_next_bit(const unsigned long *addr,
+	unsigned long size, unsigned long offset)
+{
+	unsigned int *p = ((unsigned int *) addr) + (offset >> 5);
+	unsigned int result = offset & ~31UL;
+	unsigned int tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if (offset) {
+		tmp = *p++;
+		tmp &= ~0UL << offset;
+		if (size < 32)
+			goto found_first;
+		if (tmp)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while (size >= 32) {
+		if ((tmp = *p++) != 0)
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if (!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	tmp &= ~0UL >> (32 - size);
+	if (tmp == 0UL)        /* Are any bits set? */
+		return result + size; /* Nope. */
+found_middle:
+	return result + __ffs(tmp);
+}
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
+
+static __inline__ int ext2_set_bit(int nr, volatile void * addr)
+{
+	char retval;
+
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
+	     : "d" (nr)
+	     : "%a0");
+#else
+	__asm__ __volatile__ ("bset %2,%1; sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
+	     : "di" (nr)
+	     /* No clobber */);
+#endif
+
+	return retval;
+}
+
+static __inline__ int ext2_clear_bit(int nr, volatile void * addr)
+{
+	char retval;
+
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
+	     : "d" (nr)
+	     : "%a0");
+#else
+	__asm__ __volatile__ ("bclr %2,%1; sne %0"
+	     : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
+	     : "di" (nr)
+	     /* No clobber */);
+#endif
+
+	return retval;
+}
+
+#define ext2_set_bit_atomic(lock, nr, addr)		\
+	({						\
+		int ret;				\
+		spin_lock(lock);			\
+		ret = ext2_set_bit((nr), (addr));	\
+		spin_unlock(lock);			\
+		ret;					\
+	})
+
+#define ext2_clear_bit_atomic(lock, nr, addr)		\
+	({						\
+		int ret;				\
+		spin_lock(lock);			\
+		ret = ext2_clear_bit((nr), (addr));	\
+		spin_unlock(lock);			\
+		ret;					\
+	})
+
+static __inline__ int ext2_test_bit(int nr, const volatile void * addr)
+{
+	char retval;
+
+#ifdef CONFIG_COLDFIRE
+	__asm__ __volatile__ ("lea %1,%%a0; btst %2,(%%a0); sne %0"
+	     : "=d" (retval)
+	     : "m" (((const volatile char *)addr)[nr >> 3]), "d" (nr)
+	     : "%a0");
+#else
+	__asm__ __volatile__ ("btst %2,%1; sne %0"
+	     : "=d" (retval)
+	     : "m" (((const volatile char *)addr)[nr >> 3]), "di" (nr)
+	     /* No clobber */);
+#endif
+
+	return retval;
+}
+
+#define ext2_find_first_zero_bit(addr, size) \
+        ext2_find_next_zero_bit((addr), (size), 0)
+
+static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset)
+{
+	unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
+	unsigned long result = offset & ~31UL;
+	unsigned long tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if(offset) {
+		/* We hold the little endian value in tmp, but then the
+		 * shift is illegal. So we could keep a big endian value
+		 * in tmp, like this:
+		 *
+		 * tmp = __swab32(*(p++));
+		 * tmp |= ~0UL >> (32-offset);
+		 *
+		 * but this would decrease preformance, so we change the
+		 * shift:
+		 */
+		tmp = *(p++);
+		tmp |= __swab32(~0UL >> (32-offset));
+		if(size < 32)
+			goto found_first;
+		if(~tmp)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while(size & ~31UL) {
+		if(~(tmp = *(p++)))
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if(!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	/* tmp is little endian, so we would have to swab the shift,
+	 * see above. But then we have to swab tmp below for ffz, so
+	 * we might as well do this here.
+	 */
+	return result + ffz(__swab32(tmp) | (~0UL << size));
+found_middle:
+	return result + ffz(__swab32(tmp));
+}
+
+/* Bitmap functions for the minix filesystem.  */
+#define minix_test_and_set_bit(nr,addr) test_and_set_bit(nr,addr)
+#define minix_set_bit(nr,addr) set_bit(nr,addr)
+#define minix_test_and_clear_bit(nr,addr) test_and_clear_bit(nr,addr)
+#define minix_test_bit(nr,addr) test_bit(nr,addr)
+#define minix_find_first_zero_bit(addr,size) find_first_zero_bit(addr,size)
+
+/**
+ * hweightN - returns the hamming weight of a N-bit word
+ * @x: the word to weigh
+ *
+ * The Hamming Weight of a number is the total number of bits set in it.
+ */
+
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
+#endif /* __KERNEL__ */
+
+/*
+ * fls: find last bit set.
+ */
+#define fls(x) generic_fls(x)
+
+#endif /* _M68KNOMMU_BITOPS_H */

include/asm-m68knommu/bootinfo.h

@@ -0,0 +1,2 @@
+
+/* Nothing for m68knommu */

include/asm-m68knommu/bootstd.h

@@ -0,0 +1,132 @@
+/* bootstd.h:  Bootloader system call interface
+ *
+ * (c) 1999, Rt-Control, Inc.
+ */
+
+#ifndef __BOOTSTD_H__
+#define __BOOTSTD_H__
+
+#define NR_BSC 21            /* last used bootloader system call */
+
+#define __BN_reset        0  /* reset and start the bootloader */
+#define __BN_test         1  /* tests the system call interface */
+#define __BN_exec         2  /* executes a bootloader image */
+#define __BN_exit         3  /* terminates a bootloader image */
+#define __BN_program      4  /* program FLASH from a chain */
+#define __BN_erase        5  /* erase sector(s) of FLASH */
+#define __BN_open         6
+#define __BN_write        7
+#define __BN_read         8
+#define __BN_close        9
+#define __BN_mmap         10 /* map a file descriptor into memory */
+#define __BN_munmap       11 /* remove a file to memory mapping */
+#define __BN_gethwaddr    12 /* get the hardware address of my interfaces */
+#define __BN_getserialnum 13 /* get the serial number of this board */
+#define __BN_getbenv      14 /* get a bootloader envvar */
+#define __BN_setbenv      15 /* get a bootloader envvar */
+#define __BN_setpmask     16 /* set the protection mask */
+#define __BN_readenv      17 /* read environment variables */
+#define __BN_flash_chattr_range		18
+#define __BN_flash_erase_range		19
+#define __BN_flash_write_range		20
+
+/* Calling conventions compatible to (uC)linux/68k
+ * We use simmilar macros to call into the bootloader as for uClinux
+ */
+
+#define __bsc_return(type, res) \
+do { \
+   if ((unsigned long)(res) >= (unsigned long)(-64)) { \
+      /* let errno be a function, preserve res in %d0 */ \
+      int __err = -(res); \
+      errno = __err; \
+      res = -1; \
+   } \
+   return (type)(res); \
+} while (0)
+
+#define _bsc0(type,name) \
+type name(void) \
+{ \
+   register long __res __asm__ ("%d0") = __BN_##name; \
+   __asm__ __volatile__ ("trap #2" \
+                         : "=g" (__res) \
+                         : "0" (__res) \
+                         : "%d0"); \
+   __bsc_return(type,__res); \
+}
+
+#define _bsc1(type,name,atype,a) \
+type name(atype a) \
+{ \
+   register long __res __asm__ ("%d0") = __BN_##name; \
+   register long __a __asm__ ("%d1") = (long)a; \
+   __asm__ __volatile__ ("trap #2" \
+                         : "=g" (__res) \
+                         : "0" (__res), "d" (__a) \
+                         : "%d0"); \
+   __bsc_return(type,__res); \
+}
+
+#define _bsc2(type,name,atype,a,btype,b) \
+type name(atype a, btype b) \
+{ \
+   register long __res __asm__ ("%d0") = __BN_##name; \
+   register long __a __asm__ ("%d1") = (long)a; \
+   register long __b __asm__ ("%d2") = (long)b; \
+   __asm__ __volatile__ ("trap #2" \
+                         : "=g" (__res) \
+                         : "0" (__res), "d" (__a), "d" (__b) \
+                         : "%d0"); \
+   __bsc_return(type,__res); \
+}
+
+#define _bsc3(type,name,atype,a,btype,b,ctype,c) \
+type name(atype a, btype b, ctype c) \
+{ \
+   register long __res __asm__ ("%d0") = __BN_##name; \
+   register long __a __asm__ ("%d1") = (long)a; \
+   register long __b __asm__ ("%d2") = (long)b; \
+   register long __c __asm__ ("%d3") = (long)c; \
+   __asm__ __volatile__ ("trap #2" \
+                         : "=g" (__res) \
+                         : "0" (__res), "d" (__a), "d" (__b), \
+                           "d" (__c) \
+                         : "%d0"); \
+   __bsc_return(type,__res); \
+}
+
+#define _bsc4(type,name,atype,a,btype,b,ctype,c,dtype,d) \
+type name(atype a, btype b, ctype c, dtype d) \
+{ \
+   register long __res __asm__ ("%d0") = __BN_##name; \
+   register long __a __asm__ ("%d1") = (long)a; \
+   register long __b __asm__ ("%d2") = (long)b; \
+   register long __c __asm__ ("%d3") = (long)c; \
+   register long __d __asm__ ("%d4") = (long)d; \
+   __asm__ __volatile__ ("trap #2" \
+                         : "=g" (__res) \
+                         : "0" (__res), "d" (__a), "d" (__b), \
+                           "d" (__c), "d" (__d) \
+                         : "%d0"); \
+   __bsc_return(type,__res); \
+}
+
+#define _bsc5(type,name,atype,a,btype,b,ctype,c,dtype,d,etype,e) \
+type name(atype a, btype b, ctype c, dtype d, etype e) \
+{ \
+   register long __res __asm__ ("%d0") = __BN_##name; \
+   register long __a __asm__ ("%d1") = (long)a; \
+   register long __b __asm__ ("%d2") = (long)b; \
+   register long __c __asm__ ("%d3") = (long)c; \
+   register long __d __asm__ ("%d4") = (long)d; \
+   register long __e __asm__ ("%d5") = (long)e; \
+   __asm__ __volatile__ ("trap #2" \
+                         : "=g" (__res) \
+                         : "0" (__res), "d" (__a), "d" (__b), \
+                           "d" (__c), "d" (__d), "d" (__e) \
+                         : "%d0"); \
+   __bsc_return(type,__res); \
+}
+
+#endif /* __BOOTSTD_H__ */

include/asm-m68knommu/bug.h

@@ -0,0 +1,4 @@
+#ifndef _M68KNOMMU_BUG_H
+#define _M68KNOMMU_BUG_H
+#include <asm-generic/bug.h>
+#endif

include/asm-m68knommu/bugs.h

@@ -0,0 +1,16 @@
+/*
+ *  include/asm-m68k/bugs.h
+ *
+ *  Copyright (C) 1994  Linus Torvalds
+ */
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *	void check_bugs(void);
+ */
+
+static void check_bugs(void)
+{
+}

include/asm-m68knommu/byteorder.h

@@ -0,0 +1,13 @@
+#ifndef _M68KNOMMU_BYTEORDER_H
+#define _M68KNOMMU_BYTEORDER_H
+
+#include <asm/types.h>
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _M68KNOMMU_BYTEORDER_H */

include/asm-m68knommu/cache.h

@@ -0,0 +1,12 @@
+#ifndef __ARCH_M68KNOMMU_CACHE_H
+#define __ARCH_M68KNOMMU_CACHE_H
+
+/* bytes per L1 cache line */
+#define        L1_CACHE_BYTES  16	/* this need to be at least 1 */
+
+/* m68k-elf-gcc  2.95.2 doesn't like these */
+
+#define __cacheline_aligned
+#define ____cacheline_aligned
+
+#endif

include/asm-m68knommu/cachectl.h

@@ -0,0 +1 @@
+#include <asm-m68k/cachectl.h>

include/asm-m68knommu/cacheflush.h

@@ -0,0 +1,75 @@
+#ifndef _M68KNOMMU_CACHEFLUSH_H
+#define _M68KNOMMU_CACHEFLUSH_H
+
+/*
+ * (C) Copyright 2000-2002, Greg Ungerer <gerg@snapgear.com>
+ */
+#include <linux/mm.h>
+
+#define flush_cache_all()			__flush_cache_all()
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_dcache_range(start,len)		do { } while (0)
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_icache_range(start,len)		__flush_cache_all()
+#define flush_icache_page(vma,pg)		do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+#define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vunmap(start, end)		flush_cache_all()
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+extern inline void __flush_cache_all(void)
+{
+#ifdef CONFIG_M5407
+	/*
+	 *	Use cpushl to push and invalidate all cache lines.
+	 *	Gas doesn't seem to know how to generate the ColdFire
+	 *	cpushl instruction... Oh well, bit stuff it for now.
+	 */
+	__asm__ __volatile__ (
+		"nop\n\t"
+		"clrl	%%d0\n\t"
+		"1:\n\t"
+		"movel	%%d0,%%a0\n\t"
+		"2:\n\t"
+		".word	0xf468\n\t"
+		"addl	#0x10,%%a0\n\t"
+		"cmpl	#0x00000800,%%a0\n\t"
+		"blt	2b\n\t"
+		"addql	#1,%%d0\n\t"
+		"cmpil	#4,%%d0\n\t"
+		"bne	1b\n\t"
+		"movel	#0xb6088500,%%d0\n\t"
+		"movec	%%d0,%%CACR\n\t"
+		: : : "d0", "a0" );
+#endif /* CONFIG_M5407 */
+#ifdef CONFIG_M5272
+	__asm__ __volatile__ (
+        	"movel	#0x01000000, %%d0\n\t"
+        	"movec	%%d0, %%CACR\n\t"
+		"nop\n\t"
+        	"movel	#0x80000100, %%d0\n\t"
+        	"movec	%%d0, %%CACR\n\t"
+		"nop\n\t"
+		: : : "d0" );
+#endif /* CONFIG_M5272 */
+#if 0 /* CONFIG_M5249 */
+	__asm__ __volatile__ (
+        	"movel	#0x01000000, %%d0\n\t"
+        	"movec	%%d0, %%CACR\n\t"
+		"nop\n\t"
+        	"movel	#0xa0000200, %%d0\n\t"
+        	"movec	%%d0, %%CACR\n\t"
+		"nop\n\t"
+		: : : "d0" );
+#endif /* CONFIG_M5249 */
+}
+
+#endif /* _M68KNOMMU_CACHEFLUSH_H */

include/asm-m68knommu/checksum.h

@@ -0,0 +1,133 @@
+#ifndef _M68K_CHECKSUM_H
+#define _M68K_CHECKSUM_H
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+unsigned int csum_partial_copy(const char *src, char *dst, int len, int sum);
+
+
+/*
+ * the same as csum_partial_copy, but copies from user space.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+extern unsigned int csum_partial_copy_from_user(const char *src, char *dst,
+						int len, int sum, int *csum_err);
+
+#define csum_partial_copy_nocheck(src, dst, len, sum)	\
+	csum_partial_copy((src), (dst), (len), (sum))
+
+unsigned short ip_fast_csum(unsigned char *iph, unsigned int ihl);
+
+/*
+ *	Fold a partial checksum
+ */
+
+static inline unsigned int csum_fold(unsigned int sum)
+{
+#ifdef CONFIG_COLDFIRE
+	sum = (sum & 0xffff) + (sum >> 16);
+	sum = (sum & 0xffff) + (sum >> 16);
+#else
+	unsigned int tmp = sum;
+	__asm__("swap %1\n\t"
+		"addw %1, %0\n\t"
+		"clrw %1\n\t"
+		"addxw %1, %0"
+		: "=&d" (sum), "=&d" (tmp)
+		: "0" (sum), "1" (sum));
+#endif
+	return ~sum;
+}
+
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+
+static inline unsigned int
+csum_tcpudp_nofold(unsigned long saddr, unsigned long daddr, unsigned short len,
+		  unsigned short proto, unsigned int sum)
+{
+	__asm__ ("addl  %1,%0\n\t"
+		 "addxl %4,%0\n\t"
+		 "addxl %5,%0\n\t"
+		 "clrl %1\n\t"
+		 "addxl %1,%0"
+		 : "=&d" (sum), "=&d" (saddr)
+		 : "0" (daddr), "1" (saddr), "d" (len + proto),
+		   "d"(sum));
+	return sum;
+}
+
+static inline unsigned short int
+csum_tcpudp_magic(unsigned long saddr, unsigned long daddr, unsigned short len,
+		  unsigned short proto, unsigned int sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+extern unsigned short ip_compute_csum(const unsigned char * buff, int len);
+
+#define _HAVE_ARCH_IPV6_CSUM
+static __inline__ unsigned short int
+csum_ipv6_magic(struct in6_addr *saddr, struct in6_addr *daddr,
+		__u32 len, unsigned short proto, unsigned int sum) 
+{
+	register unsigned long tmp;
+	__asm__("addl %2@,%0\n\t"
+		"movel %2@(4),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %2@(8),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %2@(12),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %3@,%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %3@(4),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %3@(8),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %3@(12),%1\n\t"
+		"addxl %1,%0\n\t"
+		"addxl %4,%0\n\t"
+		"clrl %1\n\t"
+		"addxl %1,%0"
+		: "=&d" (sum), "=&d" (tmp)
+		: "a" (saddr), "a" (daddr), "d" (len + proto),
+		  "0" (sum));
+
+	return csum_fold(sum);
+}
+
+#endif /* _M68K_CHECKSUM_H */

include/asm-m68knommu/coldfire.h

@@ -0,0 +1,86 @@
+/****************************************************************************/
+
+/*
+ *	coldfire.h -- Motorola ColdFire CPU sepecific defines
+ *
+ *	(C) Copyright 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ *	(C) Copyright 2000, Lineo (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef	coldfire_h
+#define	coldfire_h
+/****************************************************************************/
+
+#include <linux/config.h>
+
+/*
+ *	Define the processor support peripherals base address.
+ *	This is generally setup by the boards start up code.
+ */
+#define	MCF_MBAR	0x10000000
+#define	MCF_MBAR2	0x80000000
+#define	MCF_IPSBAR	0x40000000
+
+#if defined(CONFIG_M527x) || defined(CONFIG_M528x)
+#undef MCF_MBAR
+#define	MCF_MBAR	MCF_IPSBAR
+#endif
+
+/*
+ *	Define master clock frequency.
+ */
+#if defined(CONFIG_CLOCK_11MHz)
+#define	MCF_CLK		11289600
+#elif defined(CONFIG_CLOCK_16MHz)
+#define	MCF_CLK		16000000
+#elif defined(CONFIG_CLOCK_20MHz)
+#define	MCF_CLK		20000000
+#elif defined(CONFIG_CLOCK_24MHz)
+#define	MCF_CLK		24000000
+#elif defined(CONFIG_CLOCK_25MHz)
+#define	MCF_CLK		25000000
+#elif defined(CONFIG_CLOCK_33MHz)
+#define	MCF_CLK		33000000
+#elif defined(CONFIG_CLOCK_40MHz)
+#define	MCF_CLK		40000000
+#elif defined(CONFIG_CLOCK_45MHz)
+#define	MCF_CLK		45000000
+#elif defined(CONFIG_CLOCK_48MHz)
+#define	MCF_CLK		48000000
+#elif defined(CONFIG_CLOCK_50MHz)
+#define	MCF_CLK		50000000
+#elif defined(CONFIG_CLOCK_54MHz)
+#define	MCF_CLK		54000000
+#elif defined(CONFIG_CLOCK_60MHz)
+#define	MCF_CLK		60000000
+#elif defined(CONFIG_CLOCK_64MHz)
+#define	MCF_CLK		64000000
+#elif defined(CONFIG_CLOCK_66MHz)
+#define	MCF_CLK		66000000
+#elif defined(CONFIG_CLOCK_70MHz)
+#define	MCF_CLK		70000000
+#elif defined(CONFIG_CLOCK_100MHz)
+#define	MCF_CLK		100000000
+#elif defined(CONFIG_CLOCK_140MHz)
+#define	MCF_CLK		140000000
+#elif defined(CONFIG_CLOCK_150MHz)
+#define	MCF_CLK		150000000
+#elif defined(CONFIG_CLOCK_166MHz)
+#define	MCF_CLK		166000000
+#else
+#error "Don't know what your ColdFire CPU clock frequency is??"
+#endif
+
+/*
+ *	One some ColdFire family members the bus clock (used by internal
+ *	peripherals) is not the same as the CPU clock.
+ */
+#if defined(CONFIG_M5249) || defined(CONFIG_M527x)
+#define	MCF_BUSCLK	(MCF_CLK / 2)
+#else
+#define	MCF_BUSCLK	MCF_CLK
+#endif
+
+/****************************************************************************/
+#endif	/* coldfire_h */

include/asm-m68knommu/commproc.h

@@ -0,0 +1,723 @@
+
+/*
+ * 68360 Communication Processor Module.
+ * Copyright (c) 2000 Michael Leslie <mleslie@lineo.com> (mc68360) after:
+ * Copyright (c) 1997 Dan Malek <dmalek@jlc.net> (mpc8xx)
+ *
+ * This file contains structures and information for the communication
+ * processor channels.  Some CPM control and status is available
+ * through the 68360 internal memory map.  See include/asm/360_immap.h for details.
+ * This file is not a complete map of all of the 360 QUICC's capabilities
+ *
+ * On the MBX board, EPPC-Bug loads CPM microcode into the first 512
+ * bytes of the DP RAM and relocates the I2C parameter area to the
+ * IDMA1 space.  The remaining DP RAM is available for buffer descriptors
+ * or other use.
+ */
+#ifndef __CPM_360__
+#define __CPM_360__
+
+#include <linux/config.h>
+
+/* CPM Command register masks: */
+#define CPM_CR_RST	((ushort)0x8000)
+#define CPM_CR_OPCODE	((ushort)0x0f00)
+#define CPM_CR_CHAN	((ushort)0x00f0)
+#define CPM_CR_FLG	((ushort)0x0001)
+
+/* CPM Command set (opcodes): */
+#define CPM_CR_INIT_TRX		((ushort)0x0000)
+#define CPM_CR_INIT_RX		((ushort)0x0001)
+#define CPM_CR_INIT_TX		((ushort)0x0002)
+#define CPM_CR_HUNT_MODE	((ushort)0x0003)
+#define CPM_CR_STOP_TX		((ushort)0x0004)
+#define CPM_CR_GRSTOP_TX	((ushort)0x0005)
+#define CPM_CR_RESTART_TX	((ushort)0x0006)
+#define CPM_CR_CLOSE_RXBD	((ushort)0x0007)
+#define CPM_CR_SET_GADDR	((ushort)0x0008)
+#define CPM_CR_GCI_TIMEOUT	((ushort)0x0009)
+#define CPM_CR_GCI_ABORT	((ushort)0x000a)
+#define CPM_CR_RESET_BCS	((ushort)0x000a)
+
+/* CPM Channel numbers. */
+#define CPM_CR_CH_SCC1	((ushort)0x0000)
+#define CPM_CR_CH_SCC2	((ushort)0x0004)
+#define CPM_CR_CH_SPI	((ushort)0x0005)	/* SPI / Timers */
+#define CPM_CR_CH_TMR	((ushort)0x0005)
+#define CPM_CR_CH_SCC3	((ushort)0x0008)
+#define CPM_CR_CH_SMC1	((ushort)0x0009)	/* SMC1 / IDMA1 */
+#define CPM_CR_CH_IDMA1	((ushort)0x0009)
+#define CPM_CR_CH_SCC4	((ushort)0x000c)
+#define CPM_CR_CH_SMC2	((ushort)0x000d)	/* SMC2 / IDMA2 */
+#define CPM_CR_CH_IDMA2	((ushort)0x000d)
+
+
+#define mk_cr_cmd(CH, CMD)	((CMD << 8) | (CH << 4))
+
+#if 1 /* mleslie: I dinna think we have any such restrictions on
+       * DP RAM aboard the 360 board - see the MC68360UM p.3-3 */
+
+/* The dual ported RAM is multi-functional.  Some areas can be (and are
+ * being) used for microcode.  There is an area that can only be used
+ * as data ram for buffer descriptors, which is all we use right now.
+ * Currently the first 512 and last 256 bytes are used for microcode.
+ */
+/* mleslie: The uCquicc board is using no extra microcode in DPRAM */
+#define CPM_DATAONLY_BASE	((uint)0x0000)
+#define CPM_DATAONLY_SIZE	((uint)0x0800)
+#define CPM_DP_NOSPACE		((uint)0x7fffffff)
+
+#endif
+
+
+/* Export the base address of the communication processor registers
+ * and dual port ram. */
+/* extern	cpm360_t	*cpmp; */		/* Pointer to comm processor */
+extern QUICC *pquicc;
+uint         m360_cpm_dpalloc(uint size);
+/* void         *m360_cpm_hostalloc(uint size); */
+void	      m360_cpm_setbrg(uint brg, uint rate);
+
+#if 0 /* use QUICC_BD declared in include/asm/m68360_quicc.h  */
+/* Buffer descriptors used by many of the CPM protocols. */
+typedef struct cpm_buf_desc {
+	ushort	cbd_sc;		/* Status and Control */
+	ushort	cbd_datlen;	/* Data length in buffer */
+	uint	cbd_bufaddr;	/* Buffer address in host memory */
+} cbd_t;
+#endif
+
+
+/* rx bd status/control bits */
+#define BD_SC_EMPTY	((ushort)0x8000)	/* Recieve is empty */
+#define BD_SC_WRAP	((ushort)0x2000)	/* Last buffer descriptor in table */
+#define BD_SC_INTRPT	((ushort)0x1000)	/* Interrupt on change */
+#define BD_SC_LAST	((ushort)0x0800)	/* Last buffer in frame OR control char */
+
+#define BD_SC_FIRST	((ushort)0x0400)	/* 1st buffer in an HDLC frame */
+#define BD_SC_ADDR	((ushort)0x0400)	/* 1st byte is a multidrop address */
+
+#define BD_SC_CM	((ushort)0x0200)	/* Continous mode */
+#define BD_SC_ID	((ushort)0x0100)	/* Received too many idles */
+
+#define BD_SC_AM	((ushort)0x0080)	/* Multidrop address match */
+#define BD_SC_DE	((ushort)0x0080)	/* DPLL Error (HDLC) */
+
+#define BD_SC_BR	((ushort)0x0020)	/* Break received */
+#define BD_SC_LG	((ushort)0x0020)	/* Frame length violation (HDLC) */
+
+#define BD_SC_FR	((ushort)0x0010)	/* Framing error */
+#define BD_SC_NO	((ushort)0x0010)	/* Nonoctet aligned frame (HDLC) */
+
+#define BD_SC_PR	((ushort)0x0008)	/* Parity error */
+#define BD_SC_AB	((ushort)0x0008)	/* Received abort Sequence (HDLC) */
+
+#define BD_SC_OV	((ushort)0x0002)	/* Overrun */
+#define BD_SC_CD	((ushort)0x0001)	/* Carrier Detect lost */
+
+/* tx bd status/control bits (as differ from rx bd) */
+#define BD_SC_READY	((ushort)0x8000)	/* Transmit is ready */
+#define BD_SC_TC	((ushort)0x0400)	/* Transmit CRC */
+#define BD_SC_P		((ushort)0x0100)	/* xmt preamble */
+#define BD_SC_UN	((ushort)0x0002)	/* Underrun */
+
+
+
+
+/* Parameter RAM offsets. */
+
+
+
+/* In 2.4 ppc, the PROFF_S?C? are used as byte offsets into DPRAM.
+ * In 2.0, we use a more structured C struct map of DPRAM, and so 
+ * instead, we need only a parameter ram `slot'  */
+
+#define PRSLOT_SCC1	0
+#define PRSLOT_SCC2	1
+#define PRSLOT_SCC3	2
+#define PRSLOT_SMC1	2
+#define PRSLOT_SCC4	3
+#define PRSLOT_SMC2	3
+
+
+/* #define PROFF_SCC1	((uint)0x0000) */
+/* #define PROFF_SCC2	((uint)0x0100) */
+/* #define PROFF_SCC3	((uint)0x0200) */
+/* #define PROFF_SMC1	((uint)0x0280) */
+/* #define PROFF_SCC4	((uint)0x0300) */
+/* #define PROFF_SMC2	((uint)0x0380) */
+
+
+/* Define enough so I can at least use the serial port as a UART.
+ * The MBX uses SMC1 as the host serial port.
+ */
+typedef struct smc_uart {
+	ushort	smc_rbase;	/* Rx Buffer descriptor base address */
+	ushort	smc_tbase;	/* Tx Buffer descriptor base address */
+	u_char	smc_rfcr;	/* Rx function code */
+	u_char	smc_tfcr;	/* Tx function code */
+	ushort	smc_mrblr;	/* Max receive buffer length */
+	uint	smc_rstate;	/* Internal */
+	uint	smc_idp;	/* Internal */
+	ushort	smc_rbptr;	/* Internal */
+	ushort	smc_ibc;	/* Internal */
+	uint	smc_rxtmp;	/* Internal */
+	uint	smc_tstate;	/* Internal */
+	uint	smc_tdp;	/* Internal */
+	ushort	smc_tbptr;	/* Internal */
+	ushort	smc_tbc;	/* Internal */
+	uint	smc_txtmp;	/* Internal */
+	ushort	smc_maxidl;	/* Maximum idle characters */
+	ushort	smc_tmpidl;	/* Temporary idle counter */
+	ushort	smc_brklen;	/* Last received break length */
+	ushort	smc_brkec;	/* rcv'd break condition counter */
+	ushort	smc_brkcr;	/* xmt break count register */
+	ushort	smc_rmask;	/* Temporary bit mask */
+} smc_uart_t;
+
+/* Function code bits.
+*/
+#define SMC_EB	((u_char)0x10)	/* Set big endian byte order */
+
+/* SMC uart mode register.
+*/
+#define	SMCMR_REN	((ushort)0x0001)
+#define SMCMR_TEN	((ushort)0x0002)
+#define SMCMR_DM	((ushort)0x000c)
+#define SMCMR_SM_GCI	((ushort)0x0000)
+#define SMCMR_SM_UART	((ushort)0x0020)
+#define SMCMR_SM_TRANS	((ushort)0x0030)
+#define SMCMR_SM_MASK	((ushort)0x0030)
+#define SMCMR_PM_EVEN	((ushort)0x0100)	/* Even parity, else odd */
+#define SMCMR_REVD	SMCMR_PM_EVEN
+#define SMCMR_PEN	((ushort)0x0200)	/* Parity enable */
+#define SMCMR_BS	SMCMR_PEN
+#define SMCMR_SL	((ushort)0x0400)	/* Two stops, else one */
+#define SMCR_CLEN_MASK	((ushort)0x7800)	/* Character length */
+#define smcr_mk_clen(C)	(((C) << 11) & SMCR_CLEN_MASK)
+
+/* SMC2 as Centronics parallel printer.  It is half duplex, in that
+ * it can only receive or transmit.  The parameter ram values for
+ * each direction are either unique or properly overlap, so we can
+ * include them in one structure.
+ */
+typedef struct smc_centronics {
+	ushort	scent_rbase;
+	ushort	scent_tbase;
+	u_char	scent_cfcr;
+	u_char	scent_smask;
+	ushort	scent_mrblr;
+	uint	scent_rstate;
+	uint	scent_r_ptr;
+	ushort	scent_rbptr;
+	ushort	scent_r_cnt;
+	uint	scent_rtemp;
+	uint	scent_tstate;
+	uint	scent_t_ptr;
+	ushort	scent_tbptr;
+	ushort	scent_t_cnt;
+	uint	scent_ttemp;
+	ushort	scent_max_sl;
+	ushort	scent_sl_cnt;
+	ushort	scent_character1;
+	ushort	scent_character2;
+	ushort	scent_character3;
+	ushort	scent_character4;
+	ushort	scent_character5;
+	ushort	scent_character6;
+	ushort	scent_character7;
+	ushort	scent_character8;
+	ushort	scent_rccm;
+	ushort	scent_rccr;
+} smc_cent_t;
+
+/* Centronics Status Mask Register.
+*/
+#define SMC_CENT_F	((u_char)0x08)
+#define SMC_CENT_PE	((u_char)0x04)
+#define SMC_CENT_S	((u_char)0x02)
+
+/* SMC Event and Mask register.
+*/
+#define	SMCM_BRKE	((unsigned char)0x40)	/* When in UART Mode */
+#define	SMCM_BRK	((unsigned char)0x10)	/* When in UART Mode */
+#define	SMCM_TXE	((unsigned char)0x10)	/* When in Transparent Mode */
+#define	SMCM_BSY	((unsigned char)0x04)
+#define	SMCM_TX		((unsigned char)0x02)
+#define	SMCM_RX		((unsigned char)0x01)
+
+/* Baud rate generators.
+*/
+#define CPM_BRG_RST		((uint)0x00020000)
+#define CPM_BRG_EN		((uint)0x00010000)
+#define CPM_BRG_EXTC_INT	((uint)0x00000000)
+#define CPM_BRG_EXTC_CLK2	((uint)0x00004000)
+#define CPM_BRG_EXTC_CLK6	((uint)0x00008000)
+#define CPM_BRG_ATB		((uint)0x00002000)
+#define CPM_BRG_CD_MASK		((uint)0x00001ffe)
+#define CPM_BRG_DIV16		((uint)0x00000001)
+
+/* SCCs.
+*/
+#define SCC_GSMRH_IRP		((uint)0x00040000)
+#define SCC_GSMRH_GDE		((uint)0x00010000)
+#define SCC_GSMRH_TCRC_CCITT	((uint)0x00008000)
+#define SCC_GSMRH_TCRC_BISYNC	((uint)0x00004000)
+#define SCC_GSMRH_TCRC_HDLC	((uint)0x00000000)
+#define SCC_GSMRH_REVD		((uint)0x00002000)
+#define SCC_GSMRH_TRX		((uint)0x00001000)
+#define SCC_GSMRH_TTX		((uint)0x00000800)
+#define SCC_GSMRH_CDP		((uint)0x00000400)
+#define SCC_GSMRH_CTSP		((uint)0x00000200)
+#define SCC_GSMRH_CDS		((uint)0x00000100)
+#define SCC_GSMRH_CTSS		((uint)0x00000080)
+#define SCC_GSMRH_TFL		((uint)0x00000040)
+#define SCC_GSMRH_RFW		((uint)0x00000020)
+#define SCC_GSMRH_TXSY		((uint)0x00000010)
+#define SCC_GSMRH_SYNL16	((uint)0x0000000c)
+#define SCC_GSMRH_SYNL8		((uint)0x00000008)
+#define SCC_GSMRH_SYNL4		((uint)0x00000004)
+#define SCC_GSMRH_RTSM		((uint)0x00000002)
+#define SCC_GSMRH_RSYN		((uint)0x00000001)
+
+#define SCC_GSMRL_SIR		((uint)0x80000000)	/* SCC2 only */
+#define SCC_GSMRL_EDGE_NONE	((uint)0x60000000)
+#define SCC_GSMRL_EDGE_NEG	((uint)0x40000000)
+#define SCC_GSMRL_EDGE_POS	((uint)0x20000000)
+#define SCC_GSMRL_EDGE_BOTH	((uint)0x00000000)
+#define SCC_GSMRL_TCI		((uint)0x10000000)
+#define SCC_GSMRL_TSNC_3	((uint)0x0c000000)
+#define SCC_GSMRL_TSNC_4	((uint)0x08000000)
+#define SCC_GSMRL_TSNC_14	((uint)0x04000000)
+#define SCC_GSMRL_TSNC_INF	((uint)0x00000000)
+#define SCC_GSMRL_RINV		((uint)0x02000000)
+#define SCC_GSMRL_TINV		((uint)0x01000000)
+#define SCC_GSMRL_TPL_128	((uint)0x00c00000)
+#define SCC_GSMRL_TPL_64	((uint)0x00a00000)
+#define SCC_GSMRL_TPL_48	((uint)0x00800000)
+#define SCC_GSMRL_TPL_32	((uint)0x00600000)
+#define SCC_GSMRL_TPL_16	((uint)0x00400000)
+#define SCC_GSMRL_TPL_8		((uint)0x00200000)
+#define SCC_GSMRL_TPL_NONE	((uint)0x00000000)
+#define SCC_GSMRL_TPP_ALL1	((uint)0x00180000)
+#define SCC_GSMRL_TPP_01	((uint)0x00100000)
+#define SCC_GSMRL_TPP_10	((uint)0x00080000)
+#define SCC_GSMRL_TPP_ZEROS	((uint)0x00000000)
+#define SCC_GSMRL_TEND		((uint)0x00040000)
+#define SCC_GSMRL_TDCR_32	((uint)0x00030000)
+#define SCC_GSMRL_TDCR_16	((uint)0x00020000)
+#define SCC_GSMRL_TDCR_8	((uint)0x00010000)
+#define SCC_GSMRL_TDCR_1	((uint)0x00000000)
+#define SCC_GSMRL_RDCR_32	((uint)0x0000c000)
+#define SCC_GSMRL_RDCR_16	((uint)0x00008000)
+#define SCC_GSMRL_RDCR_8	((uint)0x00004000)
+#define SCC_GSMRL_RDCR_1	((uint)0x00000000)
+#define SCC_GSMRL_RENC_DFMAN	((uint)0x00003000)
+#define SCC_GSMRL_RENC_MANCH	((uint)0x00002000)
+#define SCC_GSMRL_RENC_FM0	((uint)0x00001000)
+#define SCC_GSMRL_RENC_NRZI	((uint)0x00000800)
+#define SCC_GSMRL_RENC_NRZ	((uint)0x00000000)
+#define SCC_GSMRL_TENC_DFMAN	((uint)0x00000600)
+#define SCC_GSMRL_TENC_MANCH	((uint)0x00000400)
+#define SCC_GSMRL_TENC_FM0	((uint)0x00000200)
+#define SCC_GSMRL_TENC_NRZI	((uint)0x00000100)
+#define SCC_GSMRL_TENC_NRZ	((uint)0x00000000)
+#define SCC_GSMRL_DIAG_LE	((uint)0x000000c0)	/* Loop and echo */
+#define SCC_GSMRL_DIAG_ECHO	((uint)0x00000080)
+#define SCC_GSMRL_DIAG_LOOP	((uint)0x00000040)
+#define SCC_GSMRL_DIAG_NORM	((uint)0x00000000)
+#define SCC_GSMRL_ENR		((uint)0x00000020)
+#define SCC_GSMRL_ENT		((uint)0x00000010)
+#define SCC_GSMRL_MODE_ENET	((uint)0x0000000c)
+#define SCC_GSMRL_MODE_DDCMP	((uint)0x00000009)
+#define SCC_GSMRL_MODE_BISYNC	((uint)0x00000008)
+#define SCC_GSMRL_MODE_V14	((uint)0x00000007)
+#define SCC_GSMRL_MODE_AHDLC	((uint)0x00000006)
+#define SCC_GSMRL_MODE_PROFIBUS	((uint)0x00000005)
+#define SCC_GSMRL_MODE_UART	((uint)0x00000004)
+#define SCC_GSMRL_MODE_SS7	((uint)0x00000003)
+#define SCC_GSMRL_MODE_ATALK	((uint)0x00000002)
+#define SCC_GSMRL_MODE_HDLC	((uint)0x00000000)
+
+#define SCC_TODR_TOD		((ushort)0x8000)
+
+/* SCC Event and Mask register.
+*/
+#define	SCCM_TXE	((unsigned char)0x10)
+#define	SCCM_BSY	((unsigned char)0x04)
+#define	SCCM_TX		((unsigned char)0x02)
+#define	SCCM_RX		((unsigned char)0x01)
+
+typedef struct scc_param {
+	ushort	scc_rbase;	/* Rx Buffer descriptor base address */
+	ushort	scc_tbase;	/* Tx Buffer descriptor base address */
+	u_char	scc_rfcr;	/* Rx function code */
+	u_char	scc_tfcr;	/* Tx function code */
+	ushort	scc_mrblr;	/* Max receive buffer length */
+	uint	scc_rstate;	/* Internal */
+	uint	scc_idp;	/* Internal */
+	ushort	scc_rbptr;	/* Internal */
+	ushort	scc_ibc;	/* Internal */
+	uint	scc_rxtmp;	/* Internal */
+	uint	scc_tstate;	/* Internal */
+	uint	scc_tdp;	/* Internal */
+	ushort	scc_tbptr;	/* Internal */
+	ushort	scc_tbc;	/* Internal */
+	uint	scc_txtmp;	/* Internal */
+	uint	scc_rcrc;	/* Internal */
+	uint	scc_tcrc;	/* Internal */
+} sccp_t;
+
+
+/* Function code bits.
+ */
+#define SCC_EB	((u_char)0x10)	/* Set big endian byte order */
+#define SCC_FC_DMA ((u_char)0x08) /* Set SDMA */
+
+/* CPM Ethernet through SCC1.
+ */
+typedef struct scc_enet {
+	sccp_t	sen_genscc;
+	uint	sen_cpres;	/* Preset CRC */
+	uint	sen_cmask;	/* Constant mask for CRC */
+	uint	sen_crcec;	/* CRC Error counter */
+	uint	sen_alec;	/* alignment error counter */
+	uint	sen_disfc;	/* discard frame counter */
+	ushort	sen_pads;	/* Tx short frame pad character */
+	ushort	sen_retlim;	/* Retry limit threshold */
+	ushort	sen_retcnt;	/* Retry limit counter */
+	ushort	sen_maxflr;	/* maximum frame length register */
+	ushort	sen_minflr;	/* minimum frame length register */
+	ushort	sen_maxd1;	/* maximum DMA1 length */
+	ushort	sen_maxd2;	/* maximum DMA2 length */
+	ushort	sen_maxd;	/* Rx max DMA */
+	ushort	sen_dmacnt;	/* Rx DMA counter */
+	ushort	sen_maxb;	/* Max BD byte count */
+	ushort	sen_gaddr1;	/* Group address filter */
+	ushort	sen_gaddr2;
+	ushort	sen_gaddr3;
+	ushort	sen_gaddr4;
+	uint	sen_tbuf0data0;	/* Save area 0 - current frame */
+	uint	sen_tbuf0data1;	/* Save area 1 - current frame */
+	uint	sen_tbuf0rba;	/* Internal */
+	uint	sen_tbuf0crc;	/* Internal */
+	ushort	sen_tbuf0bcnt;	/* Internal */
+	ushort	sen_paddrh;	/* physical address (MSB) */
+	ushort	sen_paddrm;
+	ushort	sen_paddrl;	/* physical address (LSB) */
+	ushort	sen_pper;	/* persistence */
+	ushort	sen_rfbdptr;	/* Rx first BD pointer */
+	ushort	sen_tfbdptr;	/* Tx first BD pointer */
+	ushort	sen_tlbdptr;	/* Tx last BD pointer */
+	uint	sen_tbuf1data0;	/* Save area 0 - current frame */
+	uint	sen_tbuf1data1;	/* Save area 1 - current frame */
+	uint	sen_tbuf1rba;	/* Internal */
+	uint	sen_tbuf1crc;	/* Internal */
+	ushort	sen_tbuf1bcnt;	/* Internal */
+	ushort	sen_txlen;	/* Tx Frame length counter */
+	ushort	sen_iaddr1;	/* Individual address filter */
+	ushort	sen_iaddr2;
+	ushort	sen_iaddr3;
+	ushort	sen_iaddr4;
+	ushort	sen_boffcnt;	/* Backoff counter */
+
+	/* NOTE: Some versions of the manual have the following items
+	 * incorrectly documented.  Below is the proper order.
+	 */
+	ushort	sen_taddrh;	/* temp address (MSB) */
+	ushort	sen_taddrm;
+	ushort	sen_taddrl;	/* temp address (LSB) */
+} scc_enet_t;
+
+
+
+#if defined (CONFIG_UCQUICC)
+/* uCquicc has the following signals connected to Ethernet:
+ *  68360    - lxt905
+ * PA0/RXD1  - rxd
+ * PA1/TXD1  - txd
+ * PA8/CLK1  - tclk
+ * PA9/CLK2  - rclk
+ * PC0/!RTS1 - t_en
+ * PC1/!CTS1 - col
+ * PC5/!CD1  - cd
+ */
+#define PA_ENET_RXD	PA_RXD1
+#define PA_ENET_TXD	PA_TXD1
+#define PA_ENET_TCLK	PA_CLK1
+#define PA_ENET_RCLK	PA_CLK2
+#define PC_ENET_TENA	PC_RTS1
+#define PC_ENET_CLSN	PC_CTS1
+#define PC_ENET_RENA	PC_CD1
+
+/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to
+ * SCC1.
+ */
+#define SICR_ENET_MASK	((uint)0x000000ff)
+#define SICR_ENET_CLKRT	((uint)0x0000002c)
+
+#endif /* config_ucquicc */
+
+
+#ifdef MBX
+/* Bits in parallel I/O port registers that have to be set/cleared
+ * to configure the pins for SCC1 use.  The TCLK and RCLK seem unique
+ * to the MBX860 board.  Any two of the four available clocks could be
+ * used, and the MPC860 cookbook manual has an example using different
+ * clock pins.
+ */
+#define PA_ENET_RXD	((ushort)0x0001)
+#define PA_ENET_TXD	((ushort)0x0002)
+#define PA_ENET_TCLK	((ushort)0x0200)
+#define PA_ENET_RCLK	((ushort)0x0800)
+#define PC_ENET_TENA	((ushort)0x0001)
+#define PC_ENET_CLSN	((ushort)0x0010)
+#define PC_ENET_RENA	((ushort)0x0020)
+
+/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
+ * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
+ */
+#define SICR_ENET_MASK	((uint)0x000000ff)
+#define SICR_ENET_CLKRT	((uint)0x0000003d)
+#endif
+
+#ifdef CONFIG_RPXLITE
+/* This ENET stuff is for the MPC850 with ethernet on SCC2.  Some of
+ * this may be unique to the RPX-Lite configuration.
+ * Note TENA is on Port B.
+ */
+#define PA_ENET_RXD	((ushort)0x0004)
+#define PA_ENET_TXD	((ushort)0x0008)
+#define PA_ENET_TCLK	((ushort)0x0200)
+#define PA_ENET_RCLK	((ushort)0x0800)
+#define PB_ENET_TENA	((uint)0x00002000)
+#define PC_ENET_CLSN	((ushort)0x0040)
+#define PC_ENET_RENA	((ushort)0x0080)
+
+#define SICR_ENET_MASK	((uint)0x0000ff00)
+#define SICR_ENET_CLKRT	((uint)0x00003d00)
+#endif
+
+#ifdef CONFIG_BSEIP
+/* This ENET stuff is for the MPC823 with ethernet on SCC2.
+ * This is unique to the BSE ip-Engine board.
+ */
+#define PA_ENET_RXD	((ushort)0x0004)
+#define PA_ENET_TXD	((ushort)0x0008)
+#define PA_ENET_TCLK	((ushort)0x0100)
+#define PA_ENET_RCLK	((ushort)0x0200)
+#define PB_ENET_TENA	((uint)0x00002000)
+#define PC_ENET_CLSN	((ushort)0x0040)
+#define PC_ENET_RENA	((ushort)0x0080)
+
+/* BSE uses port B and C bits for PHY control also.
+*/
+#define PB_BSE_POWERUP	((uint)0x00000004)
+#define PB_BSE_FDXDIS	((uint)0x00008000)
+#define PC_BSE_LOOPBACK	((ushort)0x0800)
+
+#define SICR_ENET_MASK	((uint)0x0000ff00)
+#define SICR_ENET_CLKRT	((uint)0x00002c00)
+#endif
+
+#ifdef CONFIG_RPXCLASSIC
+/* Bits in parallel I/O port registers that have to be set/cleared
+ * to configure the pins for SCC1 use.
+ */
+#define PA_ENET_RXD	((ushort)0x0001)
+#define PA_ENET_TXD	((ushort)0x0002)
+#define PA_ENET_TCLK	((ushort)0x0200)
+#define PA_ENET_RCLK	((ushort)0x0800)
+#define PB_ENET_TENA	((uint)0x00001000)
+#define PC_ENET_CLSN	((ushort)0x0010)
+#define PC_ENET_RENA	((ushort)0x0020)
+
+/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
+ * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
+ */
+#define SICR_ENET_MASK	((uint)0x000000ff)
+#define SICR_ENET_CLKRT	((uint)0x0000003d)
+#endif
+
+/* SCC Event register as used by Ethernet.
+*/
+#define SCCE_ENET_GRA	((ushort)0x0080)	/* Graceful stop complete */
+#define SCCE_ENET_TXE	((ushort)0x0010)	/* Transmit Error */
+#define SCCE_ENET_RXF	((ushort)0x0008)	/* Full frame received */
+#define SCCE_ENET_BSY	((ushort)0x0004)	/* All incoming buffers full */
+#define SCCE_ENET_TXB	((ushort)0x0002)	/* A buffer was transmitted */
+#define SCCE_ENET_RXB	((ushort)0x0001)	/* A buffer was received */
+
+/* SCC Mode Register (PMSR) as used by Ethernet.
+*/
+#define SCC_PMSR_HBC	((ushort)0x8000)	/* Enable heartbeat */
+#define SCC_PMSR_FC	((ushort)0x4000)	/* Force collision */
+#define SCC_PMSR_RSH	((ushort)0x2000)	/* Receive short frames */
+#define SCC_PMSR_IAM	((ushort)0x1000)	/* Check individual hash */
+#define SCC_PMSR_ENCRC	((ushort)0x0800)	/* Ethernet CRC mode */
+#define SCC_PMSR_PRO	((ushort)0x0200)	/* Promiscuous mode */
+#define SCC_PMSR_BRO	((ushort)0x0100)	/* Catch broadcast pkts */
+#define SCC_PMSR_SBT	((ushort)0x0080)	/* Special backoff timer */
+#define SCC_PMSR_LPB	((ushort)0x0040)	/* Set Loopback mode */
+#define SCC_PMSR_SIP	((ushort)0x0020)	/* Sample Input Pins */
+#define SCC_PMSR_LCW	((ushort)0x0010)	/* Late collision window */
+#define SCC_PMSR_NIB22	((ushort)0x000a)	/* Start frame search */
+#define SCC_PMSR_FDE	((ushort)0x0001)	/* Full duplex enable */
+
+/* Buffer descriptor control/status used by Ethernet receive.
+*/
+#define BD_ENET_RX_EMPTY	((ushort)0x8000)
+#define BD_ENET_RX_WRAP		((ushort)0x2000)
+#define BD_ENET_RX_INTR		((ushort)0x1000)
+#define BD_ENET_RX_LAST		((ushort)0x0800)
+#define BD_ENET_RX_FIRST	((ushort)0x0400)
+#define BD_ENET_RX_MISS		((ushort)0x0100)
+#define BD_ENET_RX_LG		((ushort)0x0020)
+#define BD_ENET_RX_NO		((ushort)0x0010)
+#define BD_ENET_RX_SH		((ushort)0x0008)
+#define BD_ENET_RX_CR		((ushort)0x0004)
+#define BD_ENET_RX_OV		((ushort)0x0002)
+#define BD_ENET_RX_CL		((ushort)0x0001)
+#define BD_ENET_RX_STATS	((ushort)0x013f)	/* All status bits */
+
+/* Buffer descriptor control/status used by Ethernet transmit.
+*/
+#define BD_ENET_TX_READY	((ushort)0x8000)
+#define BD_ENET_TX_PAD		((ushort)0x4000)
+#define BD_ENET_TX_WRAP		((ushort)0x2000)
+#define BD_ENET_TX_INTR		((ushort)0x1000)
+#define BD_ENET_TX_LAST		((ushort)0x0800)
+#define BD_ENET_TX_TC		((ushort)0x0400)
+#define BD_ENET_TX_DEF		((ushort)0x0200)
+#define BD_ENET_TX_HB		((ushort)0x0100)
+#define BD_ENET_TX_LC		((ushort)0x0080)
+#define BD_ENET_TX_RL		((ushort)0x0040)
+#define BD_ENET_TX_RCMASK	((ushort)0x003c)
+#define BD_ENET_TX_UN		((ushort)0x0002)
+#define BD_ENET_TX_CSL		((ushort)0x0001)
+#define BD_ENET_TX_STATS	((ushort)0x03ff)	/* All status bits */
+
+/* SCC as UART
+*/
+typedef struct scc_uart {
+	sccp_t	scc_genscc;
+	uint	scc_res1;	/* Reserved */
+	uint	scc_res2;	/* Reserved */
+	ushort	scc_maxidl;	/* Maximum idle chars */
+	ushort	scc_idlc;	/* temp idle counter */
+	ushort	scc_brkcr;	/* Break count register */
+	ushort	scc_parec;	/* receive parity error counter */
+	ushort	scc_frmec;	/* receive framing error counter */
+	ushort	scc_nosec;	/* receive noise counter */
+	ushort	scc_brkec;	/* receive break condition counter */
+	ushort	scc_brkln;	/* last received break length */
+	ushort	scc_uaddr1;	/* UART address character 1 */
+	ushort	scc_uaddr2;	/* UART address character 2 */
+	ushort	scc_rtemp;	/* Temp storage */
+	ushort	scc_toseq;	/* Transmit out of sequence char */
+	ushort	scc_char1;	/* control character 1 */
+	ushort	scc_char2;	/* control character 2 */
+	ushort	scc_char3;	/* control character 3 */
+	ushort	scc_char4;	/* control character 4 */
+	ushort	scc_char5;	/* control character 5 */
+	ushort	scc_char6;	/* control character 6 */
+	ushort	scc_char7;	/* control character 7 */
+	ushort	scc_char8;	/* control character 8 */
+	ushort	scc_rccm;	/* receive control character mask */
+	ushort	scc_rccr;	/* receive control character register */
+	ushort	scc_rlbc;	/* receive last break character */
+} scc_uart_t;
+
+/* SCC Event and Mask registers when it is used as a UART.
+*/
+#define UART_SCCM_GLR		((ushort)0x1000)
+#define UART_SCCM_GLT		((ushort)0x0800)
+#define UART_SCCM_AB		((ushort)0x0200)
+#define UART_SCCM_IDL		((ushort)0x0100)
+#define UART_SCCM_GRA		((ushort)0x0080)
+#define UART_SCCM_BRKE		((ushort)0x0040)
+#define UART_SCCM_BRKS		((ushort)0x0020)
+#define UART_SCCM_CCR		((ushort)0x0008)
+#define UART_SCCM_BSY		((ushort)0x0004)
+#define UART_SCCM_TX		((ushort)0x0002)
+#define UART_SCCM_RX		((ushort)0x0001)
+
+/* The SCC PMSR when used as a UART.
+*/
+#define SCU_PMSR_FLC		((ushort)0x8000)
+#define SCU_PMSR_SL		((ushort)0x4000)
+#define SCU_PMSR_CL		((ushort)0x3000)
+#define SCU_PMSR_UM		((ushort)0x0c00)
+#define SCU_PMSR_FRZ		((ushort)0x0200)
+#define SCU_PMSR_RZS		((ushort)0x0100)
+#define SCU_PMSR_SYN		((ushort)0x0080)
+#define SCU_PMSR_DRT		((ushort)0x0040)
+#define SCU_PMSR_PEN		((ushort)0x0010)
+#define SCU_PMSR_RPM		((ushort)0x000c)
+#define SCU_PMSR_REVP		((ushort)0x0008)
+#define SCU_PMSR_TPM		((ushort)0x0003)
+#define SCU_PMSR_TEVP		((ushort)0x0003)
+
+/* CPM Transparent mode SCC.
+ */
+typedef struct scc_trans {
+	sccp_t	st_genscc;
+	uint	st_cpres;	/* Preset CRC */
+	uint	st_cmask;	/* Constant mask for CRC */
+} scc_trans_t;
+
+#define BD_SCC_TX_LAST		((ushort)0x0800)
+
+
+
+/* CPM interrupts.  There are nearly 32 interrupts generated by CPM
+ * channels or devices.  All of these are presented to the PPC core
+ * as a single interrupt.  The CPM interrupt handler dispatches its
+ * own handlers, in a similar fashion to the PPC core handler.  We
+ * use the table as defined in the manuals (i.e. no special high
+ * priority and SCC1 == SCCa, etc...).
+ */
+/* #define CPMVEC_NR		32 */
+/* #define	CPMVEC_PIO_PC15		((ushort)0x1f) */
+/* #define	CPMVEC_SCC1		((ushort)0x1e) */
+/* #define	CPMVEC_SCC2		((ushort)0x1d) */
+/* #define	CPMVEC_SCC3		((ushort)0x1c) */
+/* #define	CPMVEC_SCC4		((ushort)0x1b) */
+/* #define	CPMVEC_PIO_PC14		((ushort)0x1a) */
+/* #define	CPMVEC_TIMER1		((ushort)0x19) */
+/* #define	CPMVEC_PIO_PC13		((ushort)0x18) */
+/* #define	CPMVEC_PIO_PC12		((ushort)0x17) */
+/* #define	CPMVEC_SDMA_CB_ERR	((ushort)0x16) */
+/* #define CPMVEC_IDMA1		((ushort)0x15) */
+/* #define CPMVEC_IDMA2		((ushort)0x14) */
+/* #define CPMVEC_TIMER2		((ushort)0x12) */
+/* #define CPMVEC_RISCTIMER	((ushort)0x11) */
+/* #define CPMVEC_I2C		((ushort)0x10) */
+/* #define	CPMVEC_PIO_PC11		((ushort)0x0f) */
+/* #define	CPMVEC_PIO_PC10		((ushort)0x0e) */
+/* #define CPMVEC_TIMER3		((ushort)0x0c) */
+/* #define	CPMVEC_PIO_PC9		((ushort)0x0b) */
+/* #define	CPMVEC_PIO_PC8		((ushort)0x0a) */
+/* #define	CPMVEC_PIO_PC7		((ushort)0x09) */
+/* #define CPMVEC_TIMER4		((ushort)0x07) */
+/* #define	CPMVEC_PIO_PC6		((ushort)0x06) */
+/* #define	CPMVEC_SPI		((ushort)0x05) */
+/* #define	CPMVEC_SMC1		((ushort)0x04) */
+/* #define	CPMVEC_SMC2		((ushort)0x03) */
+/* #define	CPMVEC_PIO_PC5		((ushort)0x02) */
+/* #define	CPMVEC_PIO_PC4		((ushort)0x01) */
+/* #define	CPMVEC_ERROR		((ushort)0x00) */
+
+extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id);
+
+/* CPM interrupt configuration vector.
+*/
+#define	CICR_SCD_SCC4		((uint)0x00c00000)	/* SCC4 @ SCCd */
+#define	CICR_SCC_SCC3		((uint)0x00200000)	/* SCC3 @ SCCc */
+#define	CICR_SCB_SCC2		((uint)0x00040000)	/* SCC2 @ SCCb */
+#define	CICR_SCA_SCC1		((uint)0x00000000)	/* SCC1 @ SCCa */
+#define CICR_IRL_MASK		((uint)0x0000e000)	/* Core interrrupt */
+#define CICR_HP_MASK		((uint)0x00001f00)	/* Hi-pri int. */
+#define CICR_IEN		((uint)0x00000080)	/* Int. enable */
+#define CICR_SPS		((uint)0x00000001)	/* SCC Spread */
+#endif /* __CPM_360__ */

include/asm-m68knommu/cputime.h

@@ -0,0 +1,6 @@
+#ifndef __M68KNOMMU_CPUTIME_H
+#define __M68KNOMMU_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __M68KNOMMU_CPUTIME_H */

include/asm-m68knommu/current.h

@@ -0,0 +1,24 @@
+#ifndef _M68KNOMMU_CURRENT_H
+#define _M68KNOMMU_CURRENT_H
+/*
+ *	current.h
+ *	(C) Copyright 2000, Lineo, David McCullough <davidm@uclinux.org>
+ *	(C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
+ *
+ *	rather than dedicate a register (as the m68k source does), we
+ *	just keep a global,  we should probably just change it all to be
+ *	current and lose _current_task.
+ */
+
+#include <linux/thread_info.h>
+
+struct task_struct;
+
+static inline struct task_struct *get_current(void)
+{
+	return(current_thread_info()->task);
+}
+
+#define	current	get_current()
+
+#endif /* _M68KNOMMU_CURRENT_H */

include/asm-m68knommu/dbg.h

@@ -0,0 +1,6 @@
+#define DEBUG 1
+#ifdef CONFIG_COLDFIRE
+#define	BREAK asm volatile ("halt")
+#else
+#define BREAK *(volatile unsigned char *)0xdeadbee0 = 0
+#endif

include/asm-m68knommu/delay.h

@@ -0,0 +1,76 @@
+#ifndef _M68KNOMMU_DELAY_H
+#define _M68KNOMMU_DELAY_H
+
+/*
+ * Copyright (C) 1994 Hamish Macdonald
+ * Copyright (C) 2004 Greg Ungerer <gerg@snapgear.com>
+ */
+
+#include <asm/param.h>
+
+extern __inline__ void __delay(unsigned long loops)
+{
+#if defined(CONFIG_COLDFIRE)
+	/* The coldfire runs this loop at significantly different speeds
+	 * depending upon long word alignment or not.  We'll pad it to
+	 * long word alignment which is the faster version.
+	 * The 0x4a8e is of course a 'tstl %fp' instruction.  This is better
+	 * than using a NOP (0x4e71) instruction because it executes in one
+	 * cycle not three and doesn't allow for an arbitary delay waiting
+	 * for bus cycles to finish.  Also fp/a6 isn't likely to cause a
+	 * stall waiting for the register to become valid if such is added
+	 * to the coldfire at some stage.
+	 */
+	__asm__ __volatile__ (	".balignw 4, 0x4a8e\n\t"
+				"1: subql #1, %0\n\t"
+				"jcc 1b"
+		: "=d" (loops) : "0" (loops));
+#else
+	__asm__ __volatile__ (	"1: subql #1, %0\n\t"
+				"jcc 1b"
+		: "=d" (loops) : "0" (loops));
+#endif
+}
+
+/*
+ *	Ideally we use a 32*32->64 multiply to calculate the number of
+ *	loop iterations, but the older standard 68k and ColdFire do not
+ *	have this instruction. So for them we have a clsoe approximation
+ *	loop using 32*32->32 multiplies only. This calculation based on
+ *	the ARM version of delay.
+ *
+ *	We want to implement:
+ *
+ *	loops = (usecs * 0x10c6 * HZ * loops_per_jiffy) / 2^32
+ */
+
+#define	HZSCALE		(268435456 / (1000000/HZ))
+
+extern unsigned long loops_per_jiffy;
+
+extern __inline__ void _udelay(unsigned long usecs)
+{
+#if defined(CONFIG_M68328) || defined(CONFIG_M68EZ328) || \
+    defined(CONFIG_M68VZ328) || defined(CONFIG_M68360) || \
+    defined(CONFIG_COLDFIRE)
+	__delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6);
+#else
+	unsigned long tmp;
+
+	usecs *= 4295;		/* 2**32 / 1000000 */
+	__asm__ ("mulul %2,%0:%1"
+		: "=d" (usecs), "=d" (tmp)
+		: "d" (usecs), "1" (loops_per_jiffy*HZ));
+	__delay(usecs);
+#endif
+}
+
+/*
+ *	Moved the udelay() function into library code, no longer inlined.
+ *	I had to change the algorithm because we are overflowing now on
+ *	the faster ColdFire parts. The code is a little biger, so it makes
+ *	sense to library it.
+ */
+extern void udelay(unsigned long usecs);
+
+#endif /* defined(_M68KNOMMU_DELAY_H) */

include/asm-m68knommu/div64.h

@@ -0,0 +1 @@
+#include <asm-generic/div64.h>

include/asm-m68knommu/dma-mapping.h

@@ -0,0 +1,10 @@
+#ifndef _M68KNOMMU_DMA_MAPPING_H
+#define _M68KNOMMU_DMA_MAPPING_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_PCI
+#include <asm-generic/dma-mapping.h>
+#endif
+
+#endif  /* _M68KNOMMU_DMA_MAPPING_H */

include/asm-m68knommu/dma.h

@@ -0,0 +1,492 @@
+#ifndef _M68K_DMA_H
+#define _M68K_DMA_H 1
+ 
+//#define	DMA_DEBUG	1
+
+#include <linux/config.h>
+
+#ifdef CONFIG_COLDFIRE
+/*
+ * ColdFire DMA Model:
+ *   ColdFire DMA supports two forms of DMA: Single and Dual address. Single
+ * address mode emits a source address, and expects that the device will either
+ * pick up the data (DMA READ) or source data (DMA WRITE). This implies that
+ * the device will place data on the correct byte(s) of the data bus, as the
+ * memory transactions are always 32 bits. This implies that only 32 bit
+ * devices will find single mode transfers useful. Dual address DMA mode
+ * performs two cycles: source read and destination write. ColdFire will
+ * align the data so that the device will always get the correct bytes, thus
+ * is useful for 8 and 16 bit devices. This is the mode that is supported
+ * below.
+ *
+ * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000 
+ *               Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
+ *
+ * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000
+ *               Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
+ *
+ * APR/18/2002 : added proper support for MCF5272 DMA controller.
+ *               Arthur Shipkowski (art@videon-central.com)
+ */
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfdma.h>
+
+/*
+ * Set number of channels of DMA on ColdFire for different implementations.
+ */
+#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#define MAX_M68K_DMA_CHANNELS 4
+#elif defined(CONFIG_M5272)
+#define MAX_M68K_DMA_CHANNELS 1
+#else
+#define MAX_M68K_DMA_CHANNELS 2
+#endif
+
+extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS];
+extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
+
+#if !defined(CONFIG_M5272)
+#define DMA_MODE_WRITE_BIT  0x01  /* Memory/IO to IO/Memory select */
+#define DMA_MODE_WORD_BIT   0x02  /* 8 or 16 bit transfers */
+#define DMA_MODE_LONG_BIT   0x04  /* or 32 bit transfers */
+#define DMA_MODE_SINGLE_BIT 0x08  /* single-address-mode */
+
+/* I/O to memory, 8 bits, mode */
+#define DMA_MODE_READ	            0
+/* memory to I/O, 8 bits, mode */
+#define DMA_MODE_WRITE	            1
+/* I/O to memory, 16 bits, mode */
+#define DMA_MODE_READ_WORD          2
+/* memory to I/O, 16 bits, mode */
+#define DMA_MODE_WRITE_WORD         3
+/* I/O to memory, 32 bits, mode */
+#define DMA_MODE_READ_LONG          4
+/* memory to I/O, 32 bits, mode */
+#define DMA_MODE_WRITE_LONG         5
+/* I/O to memory, 8 bits, single-address-mode */     
+#define DMA_MODE_READ_SINGLE        8
+/* memory to I/O, 8 bits, single-address-mode */
+#define DMA_MODE_WRITE_SINGLE       9
+/* I/O to memory, 16 bits, single-address-mode */
+#define DMA_MODE_READ_WORD_SINGLE  10
+/* memory to I/O, 16 bits, single-address-mode */
+#define DMA_MODE_WRITE_WORD_SINGLE 11
+/* I/O to memory, 32 bits, single-address-mode */
+#define DMA_MODE_READ_LONG_SINGLE  12
+/* memory to I/O, 32 bits, single-address-mode */
+#define DMA_MODE_WRITE_LONG_SINGLE 13
+
+#else /* CONFIG_M5272 is defined */
+
+/* Source static-address mode */
+#define DMA_MODE_SRC_SA_BIT 0x01  
+/* Two bits to select between all four modes */
+#define DMA_MODE_SSIZE_MASK 0x06 
+/* Offset to shift bits in */
+#define DMA_MODE_SSIZE_OFF  0x01  
+/* Destination static-address mode */
+#define DMA_MODE_DES_SA_BIT 0x10  
+/* Two bits to select between all four modes */
+#define DMA_MODE_DSIZE_MASK 0x60  
+/* Offset to shift bits in */
+#define DMA_MODE_DSIZE_OFF  0x05
+/* Size modifiers */
+#define DMA_MODE_SIZE_LONG  0x00
+#define DMA_MODE_SIZE_BYTE  0x01
+#define DMA_MODE_SIZE_WORD  0x02
+#define DMA_MODE_SIZE_LINE  0x03
+
+/* 
+ * Aliases to help speed quick ports; these may be suboptimal, however. They
+ * do not include the SINGLE mode modifiers since the MCF5272 does not have a
+ * mode where the device is in control of its addressing.
+ */
+
+/* I/O to memory, 8 bits, mode */
+#define DMA_MODE_READ	              ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
+/* memory to I/O, 8 bits, mode */
+#define DMA_MODE_WRITE	            ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
+/* I/O to memory, 16 bits, mode */
+#define DMA_MODE_READ_WORD	        ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
+/* memory to I/O, 16 bits, mode */
+#define DMA_MODE_WRITE_WORD         ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
+/* I/O to memory, 32 bits, mode */
+#define DMA_MODE_READ_LONG	        ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
+/* memory to I/O, 32 bits, mode */
+#define DMA_MODE_WRITE_LONG         ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
+
+#endif /* !defined(CONFIG_M5272) */
+
+#if !defined(CONFIG_M5272)
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+  volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+  printk("enable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT;
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+  volatile unsigned short *dmawp;
+  volatile unsigned char  *dmapb;
+
+#ifdef DMA_DEBUG
+  printk("disable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  dmapb = (unsigned char *) dma_base_addr[dmanr];
+
+  /* Turn off external requests, and stop any DMA in progress */
+  dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT;
+  dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE;
+}
+
+/*
+ * Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while interrupts are disabled! ---
+ *
+ * This is a NOP for ColdFire. Provide a stub for compatibility.
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+
+  volatile unsigned char  *dmabp;
+  volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
+#endif
+
+  dmabp = (unsigned char *) dma_base_addr[dmanr];
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+
+  // Clear config errors
+  dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE; 
+
+  // Set command register
+  dmawp[MCFDMA_DCR] =
+    MCFDMA_DCR_INT |         // Enable completion irq
+    MCFDMA_DCR_CS |          // Force one xfer per request
+    MCFDMA_DCR_AA |          // Enable auto alignment
+    // single-address-mode
+    ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) |
+    // sets s_rw (-> r/w) high if Memory to I/0
+    ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) |
+    // Memory to I/O or I/O to Memory
+    ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) |
+    // 32 bit, 16 bit or 8 bit transfers
+    ((mode & DMA_MODE_WORD_BIT)  ? MCFDMA_DCR_SSIZE_WORD : 
+     ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG :
+                                   MCFDMA_DCR_SSIZE_BYTE)) |
+    ((mode & DMA_MODE_WORD_BIT)  ? MCFDMA_DCR_DSIZE_WORD :
+     ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG :
+                                   MCFDMA_DCR_DSIZE_BYTE));
+
+#ifdef DEBUG_DMA
+  printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__,
+         dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR],
+	 (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]);
+#endif
+}
+
+/* Set transfer address for specific DMA channel */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+  volatile unsigned short *dmawp;
+  volatile unsigned int   *dmalp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+
+  // Determine which address registers are used for memory/device accesses
+  if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) {
+    // Source incrementing, must be memory
+    dmalp[MCFDMA_SAR] = a;
+    // Set dest address, must be device
+    dmalp[MCFDMA_DAR] = dma_device_address[dmanr];
+  } else {
+    // Destination incrementing, must be memory
+    dmalp[MCFDMA_DAR] = a;
+    // Set source address, must be device
+    dmalp[MCFDMA_SAR] = dma_device_address[dmanr];
+  }
+
+#ifdef DEBUG_DMA
+  printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
+	__FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR],
+	(int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR],
+	(int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]);
+#endif
+}
+
+/*
+ * Specific for Coldfire - sets device address.
+ * Should be called after the mode set call, and before set DMA address.
+ */
+static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
+{
+#ifdef DMA_DEBUG
+  printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+  dma_device_address[dmanr] = a;
+}
+
+/*
+ * NOTE 2: "count" represents _bytes_.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+  volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  dmawp[MCFDMA_BCR] = (unsigned short)count;
+}
+
+/*
+ * Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+  volatile unsigned short *dmawp;
+  unsigned short count;
+
+#ifdef DMA_DEBUG
+  printk("get_dma_residue(dmanr=%d)\n", dmanr);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  count = dmawp[MCFDMA_BCR];
+  return((int) count);
+}
+#else /* CONFIG_M5272 is defined */
+
+/*
+ * The MCF5272 DMA controller is very different than the controller defined above
+ * in terms of register mapping.  For instance, with the exception of the 16-bit 
+ * interrupt register (IRQ#85, for reference), all of the registers are 32-bit.
+ *
+ * The big difference, however, is the lack of device-requested DMA.  All modes
+ * are dual address transfer, and there is no 'device' setup or direction bit.
+ * You can DMA between a device and memory, between memory and memory, or even between
+ * two devices directly, with any combination of incrementing and non-incrementing
+ * addresses you choose.  This puts a crimp in distinguishing between the 'device 
+ * address' set up by set_dma_device_addr.
+ *
+ * Therefore, there are two options.  One is to use set_dma_addr and set_dma_device_addr,
+ * which will act exactly as above in -- it will look to see if the source is set to
+ * autoincrement, and if so it will make the source use the set_dma_addr value and the
+ * destination the set_dma_device_addr value.  Otherwise the source will be set to the
+ * set_dma_device_addr value and the destination will get the set_dma_addr value.
+ *
+ * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions
+ * and make it explicit.  Depending on what you're doing, one of these two should work
+ * for you, but don't mix them in the same transfer setup.
+ */
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+  volatile unsigned int  *dmalp;
+
+#ifdef DMA_DEBUG
+  printk("enable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN;
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+  volatile unsigned int   *dmalp;
+
+#ifdef DMA_DEBUG
+  printk("disable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+
+  /* Turn off external requests, and stop any DMA in progress */
+  dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN;
+  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
+}
+
+/*
+ * Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while interrupts are disabled! ---
+ *
+ * This is a NOP for ColdFire. Provide a stub for compatibility.
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+
+  volatile unsigned int   *dmalp;
+  volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
+#endif
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+
+  // Clear config errors
+  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET; 
+
+  // Set command register
+  dmalp[MCFDMA_DMR] =
+    MCFDMA_DMR_RQM_DUAL |         // Mandatory Request Mode setting
+    MCFDMA_DMR_DSTT_SD  |         // Set up addressing types; set to supervisor-data.
+    MCFDMA_DMR_SRCT_SD  |         // Set up addressing types; set to supervisor-data. 
+    // source static-address-mode
+    ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) |
+    // dest static-address-mode
+    ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) |
+    // burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272
+    (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) |
+    (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF);
+    
+  dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN;   /* Enable completion interrupts */
+  
+#ifdef DEBUG_DMA
+  printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__,
+         dmanr, (int) &dmalp[MCFDMA_DMR], dmabp[MCFDMA_DMR],
+	 (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]);
+#endif
+}
+
+/* Set transfer address for specific DMA channel */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+  volatile unsigned int   *dmalp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+
+  // Determine which address registers are used for memory/device accesses
+  if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) {
+    // Source incrementing, must be memory
+    dmalp[MCFDMA_DSAR] = a;
+    // Set dest address, must be device
+    dmalp[MCFDMA_DDAR] = dma_device_address[dmanr];
+  } else {
+    // Destination incrementing, must be memory
+    dmalp[MCFDMA_DDAR] = a;
+    // Set source address, must be device
+    dmalp[MCFDMA_DSAR] = dma_device_address[dmanr];
+  }
+
+#ifdef DEBUG_DMA
+  printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
+	__FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DMR], dmawp[MCFDMA_DMR],
+	(int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR],
+	(int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]);
+#endif
+}
+
+/*
+ * Specific for Coldfire - sets device address.
+ * Should be called after the mode set call, and before set DMA address.
+ */
+static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
+{
+#ifdef DMA_DEBUG
+  printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+  dma_device_address[dmanr] = a;
+}
+
+/*
+ * NOTE 2: "count" represents _bytes_.
+ *
+ * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+  volatile unsigned int *dmalp;
+  
+#ifdef DMA_DEBUG
+  printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+  dmalp[MCFDMA_DBCR] = count;
+}
+
+/*
+ * Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+  volatile unsigned int *dmalp;
+  unsigned int count;
+
+#ifdef DMA_DEBUG
+  printk("get_dma_residue(dmanr=%d)\n", dmanr);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+  count = dmalp[MCFDMA_DBCR];
+  return(count);
+}
+
+#endif /* !defined(CONFIG_M5272) */
+#endif /* CONFIG_COLDFIRE */
+ 
+#define MAX_DMA_CHANNELS 8
+
+/* Don't define MAX_DMA_ADDRESS; it's useless on the m68k/coldfire and any
+   occurrence should be flagged as an error.  */
+/* under 2.4 it is actually needed by the new bootmem allocator */
+#define MAX_DMA_ADDRESS PAGE_OFFSET
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char *device_id);	/* reserve a DMA channel */
+extern void free_dma(unsigned int dmanr);	/* release it again */
+ 
+#endif /* _M68K_DMA_H */

include/asm-m68knommu/elf.h

@@ -0,0 +1,113 @@
+#ifndef __ASMm68k_ELF_H
+#define __ASMm68k_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <linux/config.h>
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+/*
+ * 68k ELF relocation types
+ */
+#define R_68K_NONE  0
+#define R_68K_32    1
+#define R_68K_16    2
+#define R_68K_8     3
+#define R_68K_PC32  4
+#define R_68K_PC16  5
+#define R_68K_PC8   6
+#define R_68K_GOT32 7
+#define R_68K_GOT16 8
+#define R_68K_GOT8  9
+#define R_68K_GOT32O    10
+#define R_68K_GOT16O    11
+#define R_68K_GOT8O 12
+#define R_68K_PLT32 13
+#define R_68K_PLT16 14
+#define R_68K_PLT8  15
+#define R_68K_PLT32O    16
+#define R_68K_PLT16O    17
+#define R_68K_PLT8O 18
+#define R_68K_COPY  19
+#define R_68K_GLOB_DAT  20
+#define R_68K_JMP_SLOT  21
+#define R_68K_RELATIVE  22
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_m68kfp_struct elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_68K)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#define ELF_DATA	ELFDATA2MSB
+#define ELF_ARCH	EM_68K
+
+/* For SVR4/m68k the function pointer to be registered with `atexit' is
+   passed in %a1.  Although my copy of the ABI has no such statement, it
+   is actually used on ASV.  */
+#define ELF_PLAT_INIT(_r, load_addr)	_r->a1 = 0
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         0xD0000000UL
+
+#define ELF_CORE_COPY_REGS(pr_reg, regs)				\
+	/* Bleech. */							\
+	pr_reg[0] = regs->d1;						\
+	pr_reg[1] = regs->d2;						\
+	pr_reg[2] = regs->d3;						\
+	pr_reg[3] = regs->d4;						\
+	pr_reg[4] = regs->d5;						\
+	pr_reg[7] = regs->a0;						\
+	pr_reg[8] = regs->a1;						\
+	pr_reg[14] = regs->d0;						\
+	pr_reg[15] = rdusp();						\
+	pr_reg[16] = 0 /* regs->orig_d0 */;				\
+	pr_reg[17] = regs->sr;						\
+	pr_reg[18] = regs->pc;						\
+	/* pr_reg[19] = (regs->format << 12) | regs->vector; */		\
+	{								\
+	  struct switch_stack *sw = ((struct switch_stack *)regs) - 1;	\
+	  pr_reg[5] = sw->d6;						\
+	  pr_reg[6] = sw->d7;						\
+	  pr_reg[10] = sw->a3;						\
+	  pr_reg[11] = sw->a4;						\
+	  pr_reg[12] = sw->a5;						\
+	  pr_reg[13] = sw->a6;						\
+	}
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  */
+
+#define ELF_HWCAP	(0)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.  */
+
+#define ELF_PLATFORM  (NULL)
+
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+#endif
+
+#endif

include/asm-m68knommu/elia.h

@@ -0,0 +1,42 @@
+/****************************************************************************/
+
+/*
+ *	elia.h -- Lineo (formerly Moreton Bay) eLIA platform support.
+ *
+ *	(C) Copyright 1999-2000, Moreton Bay (www.moreton.com.au)
+ *	(C) Copyright 1999-2000, Lineo (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef	elia_h
+#define	elia_h
+/****************************************************************************/
+
+#include <linux/config.h>
+#include <asm/coldfire.h>
+
+#ifdef CONFIG_eLIA
+
+/*
+ *	The serial port DTR and DCD lines are also on the Parallel I/O
+ *	as well, so define those too.
+ */
+
+#define	eLIA_DCD1		0x0001
+#define	eLIA_DCD0		0x0002
+#define	eLIA_DTR1		0x0004
+#define	eLIA_DTR0		0x0008
+
+#define	eLIA_PCIRESET		0x0020
+
+/*
+ *	Kernel macros to set and unset the LEDs.
+ */
+#ifndef __ASSEMBLY__
+extern unsigned short	ppdata;
+#endif /* __ASSEMBLY__ */
+
+#endif	/* CONFIG_eLIA */
+
+/****************************************************************************/
+#endif	/* elia_h */

include/asm-m68knommu/entry.h

@@ -0,0 +1,183 @@
+#ifndef __M68KNOMMU_ENTRY_H
+#define __M68KNOMMU_ENTRY_H
+
+#include <linux/config.h>
+#include <asm/setup.h>
+#include <asm/page.h>
+
+/*
+ * Stack layout in 'ret_from_exception':
+ *
+ * This allows access to the syscall arguments in registers d1-d5
+ *
+ *	 0(sp) - d1
+ *	 4(sp) - d2
+ *	 8(sp) - d3
+ *	 C(sp) - d4
+ *	10(sp) - d5
+ *	14(sp) - a0
+ *	18(sp) - a1
+ *	1C(sp) - a2
+ *	20(sp) - d0
+ *	24(sp) - orig_d0
+ *	28(sp) - stack adjustment
+ *	2C(sp) - [ sr              ] [ format & vector ]
+ *	2E(sp) - [ pc-hiword       ] [ sr              ]
+ *	30(sp) - [ pc-loword       ] [ pc-hiword       ]
+ *	32(sp) - [ format & vector ] [ pc-loword       ]
+ *		  ^^^^^^^^^^^^^^^^^   ^^^^^^^^^^^^^^^^^
+ *			M68K		  COLDFIRE
+ */
+
+#define ALLOWINT 0xf8ff
+
+#ifdef __ASSEMBLY__
+
+/* process bits for task_struct.flags */
+PF_TRACESYS_OFF = 3
+PF_TRACESYS_BIT = 5
+PF_PTRACED_OFF = 3
+PF_PTRACED_BIT = 4
+PF_DTRACE_OFF = 1
+PF_DTRACE_BIT = 5
+
+LENOSYS = 38
+
+#define SWITCH_STACK_SIZE (6*4+4)	/* Includes return address */
+
+/*
+ * This defines the normal kernel pt-regs layout.
+ *
+ * regs are a2-a6 and d6-d7 preserved by C code
+ * the kernel doesn't mess with usp unless it needs to
+ */
+
+#ifdef CONFIG_COLDFIRE
+/*
+ * This is made a little more tricky on the ColdFire. There is no
+ * separate kernel and user stack pointers. Need to artificially
+ * construct a usp in software... When doing this we need to disable
+ * interrupts, otherwise bad things could happen.
+ */
+.macro SAVE_ALL
+	move	#0x2700,%sr		/* disable intrs */
+	btst	#5,%sp@(2)		/* from user? */
+	bnes	6f			/* no, skip */
+	movel	%sp,sw_usp		/* save user sp */
+	addql	#8,sw_usp		/* remove exception */
+	movel	sw_ksp,%sp		/* kernel sp */
+	subql	#8,%sp			/* room for exception */
+	clrl	%sp@-			/* stkadj */
+	movel	%d0,%sp@-		/* orig d0 */
+	movel	%d0,%sp@-		/* d0 */
+	lea	%sp@(-32),%sp		/* space for 8 regs */
+	moveml	%d1-%d5/%a0-%a2,%sp@
+	movel	sw_usp,%a0		/* get usp */
+	movel	%a0@-,%sp@(PT_PC)	/* copy exception program counter */
+	movel	%a0@-,%sp@(PT_FORMATVEC)/* copy exception format/vector/sr */
+	bra	7f
+	6:
+	clrl	%sp@-			/* stkadj */
+	movel	%d0,%sp@-		/* orig d0 */
+	movel	%d0,%sp@-		/* d0 */
+	lea	%sp@(-32),%sp		/* space for 8 regs */
+	moveml	%d1-%d5/%a0-%a2,%sp@
+	7:
+.endm
+
+.macro RESTORE_ALL
+	btst	#5,%sp@(PT_SR)		/* going user? */
+	bnes	8f			/* no, skip */
+	move	#0x2700,%sr		/* disable intrs */
+	movel	sw_usp,%a0		/* get usp */
+	movel	%sp@(PT_PC),%a0@-	/* copy exception program counter */
+	movel	%sp@(PT_FORMATVEC),%a0@-/* copy exception format/vector/sr */
+	moveml	%sp@,%d1-%d5/%a0-%a2
+	lea	%sp@(32),%sp		/* space for 8 regs */
+	movel	%sp@+,%d0
+	addql	#4,%sp			/* orig d0 */
+	addl	%sp@+,%sp		/* stkadj */
+	addql	#8,%sp			/* remove exception */
+	movel	%sp,sw_ksp		/* save ksp */
+	subql	#8,sw_usp		/* set exception */
+	movel	sw_usp,%sp		/* restore usp */
+	rte
+	8:
+	moveml	%sp@,%d1-%d5/%a0-%a2
+	lea	%sp@(32),%sp		/* space for 8 regs */
+	movel	%sp@+,%d0
+	addql	#4,%sp			/* orig d0 */
+	addl	%sp@+,%sp		/* stkadj */
+	rte
+.endm
+
+/*
+ * Quick exception save, use current stack only.
+ */
+.macro SAVE_LOCAL
+	move	#0x2700,%sr		/* disable intrs */
+	clrl	%sp@-			/* stkadj */
+	movel	%d0,%sp@-		/* orig d0 */
+	movel	%d0,%sp@-		/* d0 */
+	lea	%sp@(-32),%sp		/* space for 8 regs */
+	moveml	%d1-%d5/%a0-%a2,%sp@
+.endm
+
+.macro RESTORE_LOCAL
+	moveml	%sp@,%d1-%d5/%a0-%a2
+	lea	%sp@(32),%sp		/* space for 8 regs */
+	movel	%sp@+,%d0
+	addql	#4,%sp			/* orig d0 */
+	addl	%sp@+,%sp		/* stkadj */
+	rte
+.endm
+
+.macro SAVE_SWITCH_STACK
+	lea	%sp@(-24),%sp		/* 6 regs */
+	moveml	%a3-%a6/%d6-%d7,%sp@
+.endm
+
+.macro RESTORE_SWITCH_STACK
+	moveml	%sp@,%a3-%a6/%d6-%d7
+	lea	%sp@(24),%sp		/* 6 regs */
+.endm
+
+/*
+ * Software copy of the user and kernel stack pointers... Ugh...
+ * Need these to get around ColdFire not having separate kernel
+ * and user stack pointers.
+ */
+.globl sw_usp
+.globl sw_ksp
+
+#else /* !CONFIG_COLDFIRE */
+
+/*
+ * Standard 68k interrupt entry and exit macros.
+ */
+.macro SAVE_ALL
+	clrl	%sp@-			/* stkadj */
+	movel	%d0,%sp@-		/* orig d0 */
+	movel	%d0,%sp@-		/* d0 */
+	moveml	%d1-%d5/%a0-%a2,%sp@-
+.endm
+
+.macro RESTORE_ALL
+	moveml	%sp@+,%a0-%a2/%d1-%d5
+	movel	%sp@+,%d0
+	addql	#4,%sp			/* orig d0 */
+	addl	%sp@+,%sp		/* stkadj */
+	rte
+.endm
+
+.macro SAVE_SWITCH_STACK
+	moveml	%a3-%a6/%d6-%d7,%sp@-
+.endm
+
+.macro RESTORE_SWITCH_STACK
+	moveml	%sp@+,%a3-%a6/%d6-%d7
+.endm
+
+#endif /* !CONFIG_COLDFIRE */
+#endif /* __ASSEMBLY__ */
+#endif /* __M68KNOMMU_ENTRY_H */

include/asm-m68knommu/errno.h

@@ -0,0 +1 @@
+#include <asm-m68k/errno.h>

include/asm-m68knommu/fcntl.h

@@ -0,0 +1 @@
+#include <asm-m68k/fcntl.h>

include/asm-m68knommu/flat.h

@@ -0,0 +1,16 @@
+/*
+ * include/asm-m68knommu/flat.h -- uClinux flat-format executables
+ */
+
+#ifndef __M68KNOMMU_FLAT_H__
+#define __M68KNOMMU_FLAT_H__
+
+#define	flat_stack_align(sp)			/* nothing needed */
+#define	flat_argvp_envp_on_stack()		1
+#define	flat_old_ram_flag(flags)		(flags)
+#define	flat_reloc_valid(reloc, size)		((reloc) <= (size))
+#define	flat_get_addr_from_rp(rp, relval, flags)	get_unaligned(rp)
+#define	flat_put_addr_at_rp(rp, val, relval)	put_unaligned(val,rp)
+#define	flat_get_relocate_addr(rel)		(rel)
+
+#endif /* __M68KNOMMU_FLAT_H__ */

include/asm-m68knommu/fpu.h

@@ -0,0 +1,22 @@
+#ifndef __M68KNOMMU_FPU_H
+#define __M68KNOMMU_FPU_H
+
+#include <linux/config.h>
+
+/*
+ * MAX floating point unit state size (FSAVE/FRESTORE)
+ */
+#if defined(CONFIG_M68020) || defined(CONFIG_M68030)
+#define FPSTATESIZE (216/sizeof(unsigned char))
+#elif defined(CONFIG_M68040)
+#define FPSTATESIZE (96/sizeof(unsigned char))
+#elif defined(CONFIG_M68KFPU_EMU)
+#define FPSTATESIZE (28/sizeof(unsigned char))
+#elif defined(CONFIG_M68060)
+#define FPSTATESIZE (12/sizeof(unsigned char))
+#else
+/* Assume no FP unit present then... */
+#define FPSTATESIZE (2) /* dummy size */
+#endif
+
+#endif /* __M68K_FPU_H */

include/asm-m68knommu/hardirq.h

@@ -0,0 +1,25 @@
+#ifndef __M68K_HARDIRQ_H
+#define __M68K_HARDIRQ_H
+
+#include <linux/config.h>
+#include <linux/cache.h>
+#include <linux/threads.h>
+
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+#define HARDIRQ_BITS	8
+
+/*
+ * The hardirq mask has to be large enough to have
+ * space for potentially all IRQ sources in the system
+ * nesting on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+#endif /* __M68K_HARDIRQ_H */

include/asm-m68knommu/hdreg.h

@@ -0,0 +1 @@
+#include <asm-m68k/hdreg.h>

include/asm-m68knommu/hwtest.h

@@ -0,0 +1 @@
+#include <asm-m68k/hwtest.h>

include/asm-m68knommu/ide.h

@@ -0,0 +1,444 @@
+/****************************************************************************/
+/*
+ *  linux/include/asm-m68knommu/ide.h
+ *
+ *  Copyright (C) 1994-1996  Linus Torvalds & authors
+ *	Copyright (C) 2001       Lineo Inc., davidm@uclinux.org
+ */
+/****************************************************************************/
+#ifndef _M68KNOMMU_IDE_H
+#define _M68KNOMMU_IDE_H
+
+#ifdef __KERNEL__
+/****************************************************************************/
+
+#include <linux/config.h>
+#include <linux/interrupt.h>
+
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+/****************************************************************************/
+/*
+ *	some coldfire specifics
+ */
+
+#ifdef CONFIG_COLDFIRE
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+/*
+ *	Save some space,  only have 1 interface
+ */
+#define MAX_HWIFS		  1	/* we only have one interface for now */
+
+#ifdef CONFIG_SECUREEDGEMP3
+#define	MCFSIM_LOCALCS	  MCFSIM_CSCR4
+#else
+#define	MCFSIM_LOCALCS	  MCFSIM_CSCR6
+#endif
+
+#endif /* CONFIG_COLDFIRE */
+
+/****************************************************************************/
+/*
+ *	Fix up things that may not have been provided
+ */
+
+#ifndef MAX_HWIFS
+#define MAX_HWIFS	4	/* same as the other archs */
+#endif
+
+#undef SUPPORT_SLOW_DATA_PORTS
+#define SUPPORT_SLOW_DATA_PORTS 0
+
+#undef SUPPORT_VLB_SYNC
+#define SUPPORT_VLB_SYNC 0
+
+/* this definition is used only on startup .. */
+#undef HD_DATA
+#define HD_DATA NULL
+
+#define	DBGIDE(fmt,a...)
+// #define	DBGIDE(fmt,a...) printk(fmt, ##a)
+#define IDE_INLINE __inline__
+// #define IDE_INLINE
+
+/****************************************************************************/
+
+typedef union {
+	unsigned all			: 8;	/* all of the bits together */
+	struct {
+		unsigned bit7		: 1;	/* always 1 */
+		unsigned lba		: 1;	/* using LBA instead of CHS */
+		unsigned bit5		: 1;	/* always 1 */
+		unsigned unit		: 1;	/* drive select number, 0 or 1 */
+		unsigned head		: 4;	/* always zeros here */
+	} b;
+} select_t;
+
+/*
+ *	our list of ports/irq's for different boards
+ */
+
+static struct m68k_ide_defaults {
+	ide_ioreg_t	base;
+	int			irq;
+} m68k_ide_defaults[MAX_HWIFS] = {
+#if defined(CONFIG_SECUREEDGEMP3)
+	{ ((ide_ioreg_t)0x30800000), 29 },
+#elif defined(CONFIG_eLIA)
+	{ ((ide_ioreg_t)0x30c00000), 29 },
+#else
+	{ ((ide_ioreg_t)0x0), 0 }
+#endif
+};
+
+/****************************************************************************/
+
+static IDE_INLINE int ide_default_irq(ide_ioreg_t base)
+{
+	int i;
+
+	for (i = 0; i < MAX_HWIFS; i++)
+		if (m68k_ide_defaults[i].base == base)
+			return(m68k_ide_defaults[i].irq);
+	return 0;
+}
+
+static IDE_INLINE ide_ioreg_t ide_default_io_base(int index)
+{
+	if (index >= 0 && index < MAX_HWIFS)
+		return(m68k_ide_defaults[index].base);
+	return 0;
+}
+
+
+/*
+ * Set up a hw structure for a specified data port, control port and IRQ.
+ * This should follow whatever the default interface uses.
+ */
+static IDE_INLINE void ide_init_hwif_ports(
+	hw_regs_t *hw,
+	ide_ioreg_t data_port,
+	ide_ioreg_t ctrl_port,
+	int *irq)
+{
+	ide_ioreg_t reg = data_port;
+	int i;
+
+	for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
+		hw->io_ports[i] = reg;
+		reg += 1;
+	}
+	if (ctrl_port) {
+		hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
+	} else {
+		hw->io_ports[IDE_CONTROL_OFFSET] = data_port + 0xe;
+	}
+}
+
+#define ide_init_default_irq(base)	ide_default_irq(base)
+
+static IDE_INLINE int
+ide_request_irq(
+	unsigned int irq,
+	void (*handler)(int, void *, struct pt_regs *),
+	unsigned long flags,
+	const char *device,
+	void *dev_id)
+{
+#ifdef CONFIG_COLDFIRE
+	mcf_autovector(irq);
+#endif
+	return(request_irq(irq, handler, flags, device, dev_id));
+}
+
+
+static IDE_INLINE void
+ide_free_irq(unsigned int irq, void *dev_id)
+{
+	free_irq(irq, dev_id);
+}
+
+
+static IDE_INLINE int
+ide_check_region(ide_ioreg_t from, unsigned int extent)
+{
+	return 0;
+}
+
+
+static IDE_INLINE void
+ide_request_region(ide_ioreg_t from, unsigned int extent, const char *name)
+{
+}
+
+
+static IDE_INLINE void
+ide_release_region(ide_ioreg_t from, unsigned int extent)
+{
+}
+
+
+static IDE_INLINE void
+ide_fix_driveid(struct hd_driveid *id)
+{
+#ifdef CONFIG_COLDFIRE
+	int i, n;
+	unsigned short *wp = (unsigned short *) id;
+	int avoid[] = {49, 51, 52, 59, -1 }; /* do not swap these words */
+
+	/* Need to byte swap shorts,  but not char fields */
+	for (i = n = 0; i < sizeof(*id) / sizeof(*wp); i++, wp++) {
+		if (avoid[n] == i) {
+			n++;
+			continue;
+		}
+		*wp = ((*wp & 0xff) << 8) | ((*wp >> 8) & 0xff);
+	}
+	/* have to word swap the one 32 bit field */
+	id->lba_capacity = ((id->lba_capacity & 0xffff) << 16) |
+				((id->lba_capacity >> 16) & 0xffff);
+#endif
+}
+
+
+static IDE_INLINE void
+ide_release_lock (int *ide_lock)
+{
+}
+
+
+static IDE_INLINE void
+ide_get_lock(
+	int *ide_lock,
+	void (*handler)(int, void *, struct pt_regs *),
+	void *data)
+{
+}
+
+
+#define ide_ack_intr(hwif) \
+	((hwif)->hw.ack_intr ? (hwif)->hw.ack_intr(hwif) : 1)
+#define	ide__sti()	__sti()
+
+/****************************************************************************/
+/*
+ *	System specific IO requirements
+ */
+
+#ifdef CONFIG_COLDFIRE
+
+#ifdef CONFIG_SECUREEDGEMP3
+
+/* Replace standard IO functions for funky mapping of MP3 board */
+#undef outb
+#undef outb_p
+#undef inb
+#undef inb_p
+
+#define outb(v, a)          ide_outb(v, (unsigned long) (a))
+#define outb_p(v, a)        ide_outb(v, (unsigned long) (a))
+#define inb(a)              ide_inb((unsigned long) (a))
+#define inb_p(a)            ide_inb((unsigned long) (a))
+
+#define ADDR8_PTR(addr)		(((addr) & 0x1) ? (0x8000 + (addr) - 1) : (addr))
+#define ADDR16_PTR(addr)	(addr)
+#define ADDR32_PTR(addr)	(addr)
+#define SWAP8(w)			((((w) & 0xffff) << 8) | (((w) & 0xffff) >> 8))
+#define SWAP16(w)			(w)
+#define SWAP32(w)			(w)
+
+
+static IDE_INLINE void
+ide_outb(unsigned int val, unsigned int addr)
+{
+	volatile unsigned short	*rp;
+
+	DBGIDE("%s(val=%x,addr=%x)\n", __FUNCTION__, val, addr);
+	rp = (volatile unsigned short *) ADDR8_PTR(addr);
+	*rp = SWAP8(val);
+}
+
+
+static IDE_INLINE int
+ide_inb(unsigned int addr)
+{
+	volatile unsigned short	*rp, val;
+
+	DBGIDE("%s(addr=%x)\n", __FUNCTION__, addr);
+	rp = (volatile unsigned short *) ADDR8_PTR(addr);
+	val = *rp;
+	return(SWAP8(val));
+}
+
+
+static IDE_INLINE void
+ide_outw(unsigned int val, unsigned int addr)
+{
+	volatile unsigned short	*rp;
+
+	DBGIDE("%s(val=%x,addr=%x)\n", __FUNCTION__, val, addr);
+	rp = (volatile unsigned short *) ADDR16_PTR(addr);
+	*rp = SWAP16(val);
+}
+
+static IDE_INLINE void
+ide_outsw(unsigned int addr, const void *vbuf, unsigned long len)
+{
+	volatile unsigned short	*rp, val;
+	unsigned short   	*buf;
+
+	DBGIDE("%s(addr=%x,vbuf=%p,len=%x)\n", __FUNCTION__, addr, vbuf, len);
+	buf = (unsigned short *) vbuf;
+	rp = (volatile unsigned short *) ADDR16_PTR(addr);
+	for (; (len > 0); len--) {
+		val = *buf++;
+		*rp = SWAP16(val);
+	}
+}
+
+static IDE_INLINE int
+ide_inw(unsigned int addr)
+{
+	volatile unsigned short *rp, val;
+
+	DBGIDE("%s(addr=%x)\n", __FUNCTION__, addr);
+	rp = (volatile unsigned short *) ADDR16_PTR(addr);
+	val = *rp;
+	return(SWAP16(val));
+}
+
+static IDE_INLINE void
+ide_insw(unsigned int addr, void *vbuf, unsigned long len)
+{
+	volatile unsigned short *rp;
+	unsigned short          w, *buf;
+
+	DBGIDE("%s(addr=%x,vbuf=%p,len=%x)\n", __FUNCTION__, addr, vbuf, len);
+	buf = (unsigned short *) vbuf;
+	rp = (volatile unsigned short *) ADDR16_PTR(addr);
+	for (; (len > 0); len--) {
+		w = *rp;
+		*buf++ = SWAP16(w);
+	}
+}
+
+static IDE_INLINE void
+ide_insl(unsigned int addr, void *vbuf, unsigned long len)
+{
+	volatile unsigned long *rp;
+	unsigned long          w, *buf;
+
+	DBGIDE("%s(addr=%x,vbuf=%p,len=%x)\n", __FUNCTION__, addr, vbuf, len);
+	buf = (unsigned long *) vbuf;
+	rp = (volatile unsigned long *) ADDR32_PTR(addr);
+	for (; (len > 0); len--) {
+		w = *rp;
+		*buf++ = SWAP32(w);
+	}
+}
+
+static IDE_INLINE void
+ide_outsl(unsigned int addr, const void *vbuf, unsigned long len)
+{
+	volatile unsigned long	*rp, val;
+	unsigned long   	*buf;
+
+	DBGIDE("%s(addr=%x,vbuf=%p,len=%x)\n", __FUNCTION__, addr, vbuf, len);
+	buf = (unsigned long *) vbuf;
+	rp = (volatile unsigned long *) ADDR32_PTR(addr);
+	for (; (len > 0); len--) {
+		val = *buf++;
+		*rp = SWAP32(val);
+	}
+}
+
+#elif CONFIG_eLIA
+
+/* 8/16 bit acesses are controlled by flicking bits in the CS register */
+#define	ACCESS_MODE_16BIT()	\
+	*((volatile unsigned short *) (MCF_MBAR + MCFSIM_LOCALCS)) = 0x0080
+#define	ACCESS_MODE_8BIT()	\
+	*((volatile unsigned short *) (MCF_MBAR + MCFSIM_LOCALCS)) = 0x0040
+
+
+static IDE_INLINE void
+ide_outw(unsigned int val, unsigned int addr)
+{
+	ACCESS_MODE_16BIT();
+	outw(val, addr);
+	ACCESS_MODE_8BIT();
+}
+
+static IDE_INLINE void
+ide_outsw(unsigned int addr, const void *vbuf, unsigned long len)
+{
+	ACCESS_MODE_16BIT();
+	outsw(addr, vbuf, len);
+	ACCESS_MODE_8BIT();
+}
+
+static IDE_INLINE int
+ide_inw(unsigned int addr)
+{
+	int ret;
+
+	ACCESS_MODE_16BIT();
+	ret = inw(addr);
+	ACCESS_MODE_8BIT();
+	return(ret);
+}
+
+static IDE_INLINE void
+ide_insw(unsigned int addr, void *vbuf, unsigned long len)
+{
+	ACCESS_MODE_16BIT();
+	insw(addr, vbuf, len);
+	ACCESS_MODE_8BIT();
+}
+
+static IDE_INLINE void
+ide_insl(unsigned int addr, void *vbuf, unsigned long len)
+{
+	ACCESS_MODE_16BIT();
+	insl(addr, vbuf, len);
+	ACCESS_MODE_8BIT();
+}
+
+static IDE_INLINE void
+ide_outsl(unsigned int addr, const void *vbuf, unsigned long len)
+{
+	ACCESS_MODE_16BIT();
+	outsl(addr, vbuf, len);
+	ACCESS_MODE_8BIT();
+}
+
+#endif /* CONFIG_SECUREEDGEMP3 */
+
+#undef outw
+#undef outw_p
+#undef outsw
+#undef inw
+#undef inw_p
+#undef insw
+#undef insl
+#undef outsl
+
+#define	outw(v, a)	     ide_outw(v, (unsigned long) (a))
+#define	outw_p(v, a)     ide_outw(v, (unsigned long) (a))
+#define outsw(a, b, n)   ide_outsw((unsigned long) (a), b, n)
+#define	inw(a)	         ide_inw((unsigned long) (a))
+#define	inw_p(a)	     ide_inw((unsigned long) (a))
+#define insw(a, b, n)    ide_insw((unsigned long) (a), b, n)
+#define insl(a, b, n)    ide_insl((unsigned long) (a), b, n)
+#define outsl(a, b, n)   ide_outsl((unsigned long) (a), b, n)
+
+#endif CONFIG_COLDFIRE
+
+/****************************************************************************/
+#endif /* __KERNEL__ */
+#endif /* _M68KNOMMU_IDE_H */
+/****************************************************************************/

include/asm-m68knommu/io.h

@@ -0,0 +1,203 @@
+#ifndef _M68KNOMMU_IO_H
+#define _M68KNOMMU_IO_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+
+/*
+ * These are for ISA/PCI shared memory _only_ and should never be used
+ * on any other type of memory, including Zorro memory. They are meant to
+ * access the bus in the bus byte order which is little-endian!.
+ *
+ * readX/writeX() are used to access memory mapped devices. On some
+ * architectures the memory mapped IO stuff needs to be accessed
+ * differently. On the m68k architecture, we just read/write the
+ * memory location directly.
+ */
+/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
+ * two accesses to memory, which may be undesireable for some devices.
+ */
+
+/*
+ * swap functions are sometimes needed to interface little-endian hardware
+ */
+static inline unsigned short _swapw(volatile unsigned short v)
+{
+    return ((v << 8) | (v >> 8));
+}
+
+static inline unsigned int _swapl(volatile unsigned long v)
+{
+    return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24));
+}
+
+#define readb(addr) \
+    ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; })
+#define readw(addr) \
+    ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; })
+#define readl(addr) \
+    ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; })
+
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+
+#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b))
+#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b))
+#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b))
+
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+
+static inline void io_outsb(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned char *ap = (volatile unsigned char *) addr;
+	unsigned char *bp = (unsigned char *) buf;
+	while (len--)
+		*ap = *bp++;
+}
+
+static inline void io_outsw(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned short *ap = (volatile unsigned short *) addr;
+	unsigned short *bp = (unsigned short *) buf;
+	while (len--)
+		*ap = _swapw(*bp++);
+}
+
+static inline void io_outsl(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned int *ap = (volatile unsigned int *) addr;
+	unsigned int *bp = (unsigned int *) buf;
+	while (len--)
+		*ap = _swapl(*bp++);
+}
+
+static inline void io_insb(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned char *ap = (volatile unsigned char *) addr;
+	unsigned char *bp = (unsigned char *) buf;
+	while (len--)
+		*bp++ = *ap;
+}
+
+static inline void io_insw(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned short *ap = (volatile unsigned short *) addr;
+	unsigned short *bp = (unsigned short *) buf;
+	while (len--)
+		*bp++ = _swapw(*ap);
+}
+
+static inline void io_insl(unsigned int addr, void *buf, int len)
+{
+	volatile unsigned int *ap = (volatile unsigned int *) addr;
+	unsigned int *bp = (unsigned int *) buf;
+	while (len--)
+		*bp++ = _swapl(*ap);
+}
+
+#define mmiowb()
+
+/*
+ *	make the short names macros so specific devices
+ *	can override them as required
+ */
+
+#define memset_io(a,b,c)	memset((void *)(a),(b),(c))
+#define memcpy_fromio(a,b,c)	memcpy((a),(void *)(b),(c))
+#define memcpy_toio(a,b,c)	memcpy((void *)(a),(b),(c))
+
+#define inb(addr)    readb(addr)
+#define inw(addr)    readw(addr)
+#define inl(addr)    readl(addr)
+#define outb(x,addr) ((void) writeb(x,addr))
+#define outw(x,addr) ((void) writew(x,addr))
+#define outl(x,addr) ((void) writel(x,addr))
+
+#define inb_p(addr)    inb(addr)
+#define inw_p(addr)    inw(addr)
+#define inl_p(addr)    inl(addr)
+#define outb_p(x,addr) outb(x,addr)
+#define outw_p(x,addr) outw(x,addr)
+#define outl_p(x,addr) outl(x,addr)
+
+#define outsb(a,b,l) io_outsb(a,b,l)
+#define outsw(a,b,l) io_outsw(a,b,l)
+#define outsl(a,b,l) io_outsl(a,b,l)
+
+#define insb(a,b,l) io_insb(a,b,l)
+#define insw(a,b,l) io_insw(a,b,l)
+#define insl(a,b,l) io_insl(a,b,l)
+
+#define IO_SPACE_LIMIT 0xffff
+
+
+/* Values for nocacheflag and cmode */
+#define IOMAP_FULL_CACHING		0
+#define IOMAP_NOCACHE_SER		1
+#define IOMAP_NOCACHE_NONSER		2
+#define IOMAP_WRITETHROUGH		3
+
+extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag);
+extern void __iounmap(void *addr, unsigned long size);
+
+extern inline void *ioremap(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+extern inline void *ioremap_nocache(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+extern inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
+}
+extern inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
+}
+
+extern void iounmap(void *addr);
+
+/* Nothing to do */
+
+#define dma_cache_inv(_start,_size)		do { } while (0)
+#define dma_cache_wback(_start,_size)		do { } while (0)
+#define dma_cache_wback_inv(_start,_size)	do { } while (0)
+
+/* Pages to physical address... */
+#define page_to_phys(page)      ((page - mem_map) << PAGE_SHIFT)
+#define page_to_bus(page)       ((page - mem_map) << PAGE_SHIFT)
+
+/*
+ * Macros used for converting between virtual and physical mappings.
+ */
+#define mm_ptov(vaddr)		((void *) (vaddr))
+#define mm_vtop(vaddr)		((unsigned long) (vaddr))
+#define phys_to_virt(vaddr)	((void *) (vaddr))
+#define virt_to_phys(vaddr)	((unsigned long) (vaddr))
+
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68KNOMMU_IO_H */

include/asm-m68knommu/ioctl.h

@@ -0,0 +1 @@
+#include <asm-m68k/ioctl.h>

include/asm-m68knommu/ioctls.h

@@ -0,0 +1 @@
+#include <asm-m68k/ioctls.h>

include/asm-m68knommu/ipc.h

@@ -0,0 +1 @@
+#include <asm-generic/ipc.h>

include/asm-m68knommu/ipcbuf.h

@@ -0,0 +1 @@
+#include <asm-m68k/ipcbuf.h>

include/asm-m68knommu/irq.h

@@ -0,0 +1,128 @@
+#ifndef _M68K_IRQ_H_
+#define _M68K_IRQ_H_
+
+#include <linux/config.h>
+#include <linux/interrupt.h>
+#include <asm/ptrace.h>
+
+#ifdef CONFIG_COLDFIRE
+/*
+ * On the ColdFire we keep track of all vectors. That way drivers
+ * can register whatever vector number they wish, and we can deal
+ * with it.
+ */
+#define	SYS_IRQS	256
+#define	NR_IRQS		SYS_IRQS
+
+#else
+
+/*
+ * # of m68k interrupts
+ */
+#define SYS_IRQS 8
+#define NR_IRQS (24+SYS_IRQS)
+
+#endif /* CONFIG_COLDFIRE */
+
+/*
+ * Interrupt source definitions
+ * General interrupt sources are the level 1-7.
+ * Adding an interrupt service routine for one of these sources
+ * results in the addition of that routine to a chain of routines.
+ * Each one is called in succession.  Each individual interrupt
+ * service routine should determine if the device associated with
+ * that routine requires service.
+ */
+
+#define IRQ1		(1)	/* level 1 interrupt */
+#define IRQ2		(2)	/* level 2 interrupt */
+#define IRQ3		(3)	/* level 3 interrupt */
+#define IRQ4		(4)	/* level 4 interrupt */
+#define IRQ5		(5)	/* level 5 interrupt */
+#define IRQ6		(6)	/* level 6 interrupt */
+#define IRQ7		(7)	/* level 7 interrupt (non-maskable) */
+
+/*
+ * Machine specific interrupt sources.
+ *
+ * Adding an interrupt service routine for a source with this bit
+ * set indicates a special machine specific interrupt source.
+ * The machine specific files define these sources.
+ *
+ * The IRQ_MACHSPEC bit is now gone - the only thing it did was to
+ * introduce unnecessary overhead.
+ *
+ * All interrupt handling is actually machine specific so it is better
+ * to use function pointers, as used by the Sparc port, and select the
+ * interrupt handling functions when initializing the kernel. This way
+ * we save some unnecessary overhead at run-time. 
+ *                                                      01/11/97 - Jes
+ */
+
+extern void (*mach_enable_irq)(unsigned int);
+extern void (*mach_disable_irq)(unsigned int);
+
+/*
+ * various flags for request_irq() - the Amiga now uses the standard
+ * mechanism like all other architectures - SA_INTERRUPT and SA_SHIRQ
+ * are your friends.
+ */
+#define IRQ_FLG_LOCK	(0x0001)	/* handler is not replaceable	*/
+#define IRQ_FLG_REPLACE	(0x0002)	/* replace existing handler	*/
+#define IRQ_FLG_FAST	(0x0004)
+#define IRQ_FLG_SLOW	(0x0008)
+#define IRQ_FLG_STD	(0x8000)	/* internally used		*/
+
+#ifdef CONFIG_M68360
+
+#define CPM_INTERRUPT    IRQ4
+
+/* see MC68360 User's Manual, p. 7-377  */
+#define CPM_VECTOR_BASE  0x04           /* 3 MSbits of CPM vector */
+
+#endif /* CONFIG_M68360 */
+
+/*
+ * This structure is used to chain together the ISRs for a particular
+ * interrupt source (if it supports chaining).
+ */
+typedef struct irq_node {
+	irqreturn_t	(*handler)(int, void *, struct pt_regs *);
+	unsigned long	flags;
+	void		*dev_id;
+	const char	*devname;
+	struct irq_node *next;
+} irq_node_t;
+
+/*
+ * This structure has only 4 elements for speed reasons
+ */
+typedef struct irq_handler {
+	irqreturn_t	(*handler)(int, void *, struct pt_regs *);
+	unsigned long	flags;
+	void		*dev_id;
+	const char	*devname;
+} irq_handler_t;
+
+/* count of spurious interrupts */
+extern volatile unsigned int num_spurious;
+
+/*
+ * This function returns a new irq_node_t
+ */
+extern irq_node_t *new_irq_node(void);
+
+/*
+ * Some drivers want these entry points
+ */
+#define enable_irq(x)	(mach_enable_irq  ? (*mach_enable_irq)(x)  : 0)
+#define disable_irq(x)	(mach_disable_irq ? (*mach_disable_irq)(x) : 0)
+
+#define enable_irq_nosync(x)	enable_irq(x)
+#define disable_irq_nosync(x)	disable_irq(x)
+
+struct irqaction;
+struct pt_regs;
+int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *);
+
+#endif /* _M68K_IRQ_H_ */

include/asm-m68knommu/kmap_types.h

@@ -0,0 +1,21 @@
+#ifndef __ASM_M68K_KMAP_TYPES_H
+#define __ASM_M68K_KMAP_TYPES_H
+
+enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,
+	KM_TYPE_NR
+};
+
+#endif

include/asm-m68knommu/linkage.h

@@ -0,0 +1 @@
+#include <asm-m68k/linkage.h>

include/asm-m68knommu/local.h

@@ -0,0 +1,6 @@
+#ifndef __M68KNOMMU_LOCAL_H
+#define __M68KNOMMU_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif /* __M68KNOMMU_LOCAL_H */

include/asm-m68knommu/m5206sim.h

@@ -0,0 +1,132 @@
+/****************************************************************************/
+
+/*
+ *	m5206sim.h -- ColdFire 5206 System Integration Module support.
+ *
+ *	(C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
+ * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef	m5206sim_h
+#define	m5206sim_h
+/****************************************************************************/
+
+#include <linux/config.h>
+
+/*
+ *	Define the 5206 SIM register set addresses.
+ */
+#define	MCFSIM_SIMR		0x03		/* SIM Config reg (r/w) */
+#define	MCFSIM_ICR1		0x14		/* Intr Ctrl reg 1 (r/w) */
+#define	MCFSIM_ICR2		0x15		/* Intr Ctrl reg 2 (r/w) */
+#define	MCFSIM_ICR3		0x16		/* Intr Ctrl reg 3 (r/w) */
+#define	MCFSIM_ICR4		0x17		/* Intr Ctrl reg 4 (r/w) */
+#define	MCFSIM_ICR5		0x18		/* Intr Ctrl reg 5 (r/w) */
+#define	MCFSIM_ICR6		0x19		/* Intr Ctrl reg 6 (r/w) */
+#define	MCFSIM_ICR7		0x1a		/* Intr Ctrl reg 7 (r/w) */
+#define	MCFSIM_ICR8		0x1b		/* Intr Ctrl reg 8 (r/w) */
+#define	MCFSIM_ICR9		0x1c		/* Intr Ctrl reg 9 (r/w) */
+#define	MCFSIM_ICR10		0x1d		/* Intr Ctrl reg 10 (r/w) */
+#define	MCFSIM_ICR11		0x1e		/* Intr Ctrl reg 11 (r/w) */
+#define	MCFSIM_ICR12		0x1f		/* Intr Ctrl reg 12 (r/w) */
+#define	MCFSIM_ICR13		0x20		/* Intr Ctrl reg 13 (r/w) */
+#ifdef CONFIG_M5206e
+#define	MCFSIM_ICR14		0x21		/* Intr Ctrl reg 14 (r/w) */
+#define	MCFSIM_ICR15		0x22		/* Intr Ctrl reg 15 (r/w) */
+#endif
+
+#define MCFSIM_IMR		0x36		/* Interrupt Mask reg (r/w) */
+#define MCFSIM_IPR		0x3a		/* Interrupt Pend reg (r/w) */
+
+#define	MCFSIM_RSR		0x40		/* Reset Status reg (r/w) */
+#define	MCFSIM_SYPCR		0x41		/* System Protection reg (r/w)*/
+
+#define	MCFSIM_SWIVR		0x42		/* SW Watchdog intr reg (r/w) */
+#define	MCFSIM_SWSR		0x43		/* SW Watchdog service (r/w) */
+
+#define	MCFSIM_DCRR		0x46		/* DRAM Refresh reg (r/w) */
+#define	MCFSIM_DCTR		0x4a		/* DRAM Timing reg (r/w) */
+#define	MCFSIM_DAR0		0x4c		/* DRAM 0 Address reg(r/w) */
+#define	MCFSIM_DMR0		0x50		/* DRAM 0 Mask reg (r/w) */
+#define	MCFSIM_DCR0		0x57		/* DRAM 0 Control reg (r/w) */
+#define	MCFSIM_DAR1		0x58		/* DRAM 1 Address reg (r/w) */
+#define	MCFSIM_DMR1		0x5c		/* DRAM 1 Mask reg (r/w) */
+#define	MCFSIM_DCR1		0x63		/* DRAM 1 Control reg (r/w) */
+
+#define	MCFSIM_CSAR0		0x64		/* CS 0 Address 0 reg (r/w) */
+#define	MCFSIM_CSMR0		0x68		/* CS 0 Mask 0 reg (r/w) */
+#define	MCFSIM_CSCR0		0x6e		/* CS 0 Control reg (r/w) */
+#define	MCFSIM_CSAR1		0x70		/* CS 1 Address reg (r/w) */
+#define	MCFSIM_CSMR1		0x74		/* CS 1 Mask reg (r/w) */
+#define	MCFSIM_CSCR1		0x7a		/* CS 1 Control reg (r/w) */
+#define	MCFSIM_CSAR2		0x7c		/* CS 2 Address reg (r/w) */
+#define	MCFSIM_CSMR2		0x80		/* CS 2 Mask reg (r/w) */
+#define	MCFSIM_CSCR2		0x86		/* CS 2 Control reg (r/w) */
+#define	MCFSIM_CSAR3		0x88		/* CS 3 Address reg (r/w) */
+#define	MCFSIM_CSMR3		0x8c		/* CS 3 Mask reg (r/w) */
+#define	MCFSIM_CSCR3		0x92		/* CS 3 Control reg (r/w) */
+#define	MCFSIM_CSAR4		0x94		/* CS 4 Address reg (r/w) */
+#define	MCFSIM_CSMR4		0x98		/* CS 4 Mask reg (r/w) */
+#define	MCFSIM_CSCR4		0x9e		/* CS 4 Control reg (r/w) */
+#define	MCFSIM_CSAR5		0xa0		/* CS 5 Address reg (r/w) */
+#define	MCFSIM_CSMR5		0xa4		/* CS 5 Mask reg (r/w) */
+#define	MCFSIM_CSCR5		0xaa		/* CS 5 Control reg (r/w) */
+#define	MCFSIM_CSAR6		0xac		/* CS 6 Address reg (r/w) */
+#define	MCFSIM_CSMR6		0xb0		/* CS 6 Mask reg (r/w) */
+#define	MCFSIM_CSCR6		0xb6		/* CS 6 Control reg (r/w) */
+#define	MCFSIM_CSAR7		0xb8		/* CS 7 Address reg (r/w) */
+#define	MCFSIM_CSMR7		0xbc		/* CS 7 Mask reg (r/w) */
+#define	MCFSIM_CSCR7		0xc2		/* CS 7 Control reg (r/w) */
+#define	MCFSIM_DMCR		0xc6		/* Default control */
+
+#ifdef CONFIG_M5206e
+#define	MCFSIM_PAR		0xca		/* Pin Assignment reg (r/w) */
+#else
+#define	MCFSIM_PAR		0xcb		/* Pin Assignment reg (r/w) */
+#endif
+
+#define	MCFSIM_PADDR		0x1c5		/* Parallel Direction (r/w) */
+#define	MCFSIM_PADAT		0x1c9		/* Parallel Port Value (r/w) */
+
+/*
+ *	Some symbol defines for the Parallel Port Pin Assignment Register
+ */
+#ifdef CONFIG_M5206e
+#define MCFSIM_PAR_DREQ0        0x100           /* Set to select DREQ0 input */
+                                                /* Clear to select T0 input */
+#define MCFSIM_PAR_DREQ1        0x200           /* Select DREQ1 input */
+                                                /* Clear to select T0 output */
+#endif
+
+/*
+ *	Some symbol defines for the Interrupt Control Register
+ */
+#define	MCFSIM_SWDICR		MCFSIM_ICR8	/* Watchdog timer ICR */
+#define	MCFSIM_TIMER1ICR	MCFSIM_ICR9	/* Timer 1 ICR */
+#define	MCFSIM_TIMER2ICR	MCFSIM_ICR10	/* Timer 2 ICR */
+#define	MCFSIM_UART1ICR		MCFSIM_ICR12	/* UART 1 ICR */
+#define	MCFSIM_UART2ICR		MCFSIM_ICR13	/* UART 2 ICR */
+#ifdef CONFIG_M5206e
+#define	MCFSIM_DMA1ICR		MCFSIM_ICR14	/* DMA 1 ICR */
+#define	MCFSIM_DMA2ICR		MCFSIM_ICR15	/* DMA 2 ICR */
+#endif
+
+#if defined(CONFIG_M5206e)
+#define	MCFSIM_IMR_MASKALL	0xfffe		/* All SIM intr sources */
+#endif
+
+/*
+ *	Macro to get and set IMR register. It is 16 bits on the 5206.
+ */
+#define	mcf_getimr()		\
+	*((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR))
+
+#define	mcf_setimr(imr)		\
+	*((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR)) = (imr)
+
+#define	mcf_getipr()		\
+	*((volatile unsigned short *) (MCF_MBAR + MCFSIM_IPR))
+
+/****************************************************************************/
+#endif	/* m5206sim_h */

include/asm-m68knommu/m5249sim.h

@@ -0,0 +1,209 @@
+/****************************************************************************/
+
+/*
+ *	m5249sim.h -- ColdFire 5249 System Integration Module support.
+ *
+ *	(C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef	m5249sim_h
+#define	m5249sim_h
+/****************************************************************************/
+
+/*
+ *	Define the 5249 SIM register set addresses.
+ */
+#define	MCFSIM_RSR		0x00		/* Reset Status reg (r/w) */
+#define	MCFSIM_SYPCR		0x01		/* System Protection reg (r/w)*/
+#define	MCFSIM_SWIVR		0x02		/* SW Watchdog intr reg (r/w) */
+#define	MCFSIM_SWSR		0x03		/* SW Watchdog service (r/w) */
+#define	MCFSIM_PAR		0x04		/* Pin Assignment reg (r/w) */
+#define	MCFSIM_IRQPAR		0x06		/* Interrupt Assignment reg (r/w) */
+#define	MCFSIM_MPARK		0x0C		/* BUS Master Control Reg*/
+#define	MCFSIM_IPR		0x40		/* Interrupt Pend reg (r/w) */
+#define	MCFSIM_IMR		0x44		/* Interrupt Mask reg (r/w) */
+#define	MCFSIM_AVR		0x4b		/* Autovector Ctrl reg (r/w) */
+#define	MCFSIM_ICR0		0x4c		/* Intr Ctrl reg 0 (r/w) */
+#define	MCFSIM_ICR1		0x4d		/* Intr Ctrl reg 1 (r/w) */
+#define	MCFSIM_ICR2		0x4e		/* Intr Ctrl reg 2 (r/w) */
+#define	MCFSIM_ICR3		0x4f		/* Intr Ctrl reg 3 (r/w) */
+#define	MCFSIM_ICR4		0x50		/* Intr Ctrl reg 4 (r/w) */
+#define	MCFSIM_ICR5		0x51		/* Intr Ctrl reg 5 (r/w) */
+#define	MCFSIM_ICR6		0x52		/* Intr Ctrl reg 6 (r/w) */
+#define	MCFSIM_ICR7		0x53		/* Intr Ctrl reg 7 (r/w) */
+#define	MCFSIM_ICR8		0x54		/* Intr Ctrl reg 8 (r/w) */
+#define	MCFSIM_ICR9		0x55		/* Intr Ctrl reg 9 (r/w) */
+#define	MCFSIM_ICR10		0x56		/* Intr Ctrl reg 10 (r/w) */
+#define	MCFSIM_ICR11		0x57		/* Intr Ctrl reg 11 (r/w) */
+
+#define MCFSIM_CSAR0		0x80		/* CS 0 Address 0 reg (r/w) */
+#define MCFSIM_CSMR0		0x84		/* CS 0 Mask 0 reg (r/w) */
+#define MCFSIM_CSCR0		0x8a		/* CS 0 Control reg (r/w) */
+#define MCFSIM_CSAR1		0x8c		/* CS 1 Address reg (r/w) */
+#define MCFSIM_CSMR1		0x90		/* CS 1 Mask reg (r/w) */
+#define MCFSIM_CSCR1		0x96		/* CS 1 Control reg (r/w) */
+#define MCFSIM_CSAR2		0x98		/* CS 2 Adress reg (r/w) */
+#define MCFSIM_CSMR2		0x9c		/* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
+#define MCFSIM_CSAR3		0xa4		/* CS 3 Adress reg (r/w) */
+#define MCFSIM_CSMR3		0xa8		/* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
+
+#define MCFSIM_DCR		0x100		/* DRAM Control reg (r/w) */
+#define MCFSIM_DACR0		0x108		/* DRAM 0 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR0		0x10c		/* DRAM 0 Mask reg (r/w) */
+#define MCFSIM_DACR1		0x110		/* DRAM 1 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR1		0x114		/* DRAM 1 Mask reg (r/w) */
+
+
+/*
+ *	Some symbol defines for the above...
+ */
+#define	MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
+#define	MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
+#define	MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
+#define	MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
+#define	MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
+#define	MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
+#define	MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
+#define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
+#define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
+
+/*
+ *	General purpose IO registers (in MBAR2).
+ */
+#define	MCFSIM2_GPIOREAD	0x0		/* GPIO read values */
+#define	MCFSIM2_GPIOWRITE	0x4		/* GPIO write values */
+#define	MCFSIM2_GPIOENABLE	0x8		/* GPIO enabled */
+#define	MCFSIM2_GPIOFUNC	0xc		/* GPIO function */
+#define	MCFSIM2_GPIO1READ	0xb0		/* GPIO1 read values */
+#define	MCFSIM2_GPIO1WRITE	0xb4		/* GPIO1 write values */
+#define	MCFSIM2_GPIO1ENABLE	0xb8		/* GPIO1 enabled */
+#define	MCFSIM2_GPIO1FUNC	0xbc		/* GPIO1 function */
+
+#define	MCFSIM2_GPIOINTSTAT	0xc0		/* GPIO interrupt status */
+#define	MCFSIM2_GPIOINTCLEAR	0xc0		/* GPIO interrupt clear */
+#define	MCFSIM2_GPIOINTENABLE	0xc4		/* GPIO interrupt enable */
+
+#define	MCFSIM2_INTLEVEL1	0x140		/* Interrupt level reg 1 */
+#define	MCFSIM2_INTLEVEL2	0x144		/* Interrupt level reg 2 */
+#define	MCFSIM2_INTLEVEL3	0x148		/* Interrupt level reg 3 */
+#define	MCFSIM2_INTLEVEL4	0x14c		/* Interrupt level reg 4 */
+#define	MCFSIM2_INTLEVEL5	0x150		/* Interrupt level reg 5 */
+#define	MCFSIM2_INTLEVEL6	0x154		/* Interrupt level reg 6 */
+#define	MCFSIM2_INTLEVEL7	0x158		/* Interrupt level reg 7 */
+#define	MCFSIM2_INTLEVEL8	0x15c		/* Interrupt level reg 8 */
+
+#define	MCFSIM2_DMAROUTE	0x188		/* DMA routing */
+
+#define	MCFSIM2_IDECONFIG1	0x18c		/* IDEconfig1 */
+#define	MCFSIM2_IDECONFIG2	0x190		/* IDEconfig2 */
+
+
+/*
+ *	Macro to set IMR register. It is 32 bits on the 5249.
+ */
+#define	MCFSIM_IMR_MASKALL	0x7fffe		/* All SIM intr sources */
+
+#define	mcf_getimr()		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
+
+#define	mcf_setimr(imr)		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
+
+#define	mcf_getipr()		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
+
+/****************************************************************************/
+
+#ifdef __ASSEMBLER__
+
+/*
+ *	The M5249C3 board needs a little help getting all its SIM devices
+ *	initialized at kernel start time. dBUG doesn't set much up, so
+ *	we need to do it manually.
+ */
+.macro m5249c3_setup
+	/*
+	 *	Set MBAR1 and MBAR2, just incase they are not set.
+	 */
+	movel	#0x10000001,%a0
+	movec	%a0,%MBAR			/* map MBAR region */
+	subql	#1,%a0				/* get MBAR address in a0 */
+
+	movel	#0x80000001,%a1
+	movec	%a1,#3086			/* map MBAR2 region */
+	subql	#1,%a1				/* get MBAR2 address in a1 */
+
+	/*
+	 *      Move secondary interrupts to base at 128.
+	 */
+	moveb	#0x80,%d0
+	moveb	%d0,0x16b(%a1)			/* interrupt base register */
+
+	/*
+	 *      Work around broken CSMR0/DRAM vector problem.
+	 */
+	movel	#0x001F0021,%d0			/* disable C/I bit */
+	movel	%d0,0x84(%a0)			/* set CSMR0 */
+
+	/*
+	 *	Disable the PLL firstly. (Who knows what state it is
+	 *	in here!).
+	 */
+	movel	0x180(%a1),%d0			/* get current PLL value */
+	andl	#0xfffffffe,%d0			/* PLL bypass first */
+	movel	%d0,0x180(%a1)			/* set PLL register */
+	nop
+
+#ifdef CONFIG_CLOCK_140MHz
+	/*
+	 *	Set initial clock frequency. This assumes M5249C3 board
+	 *	is fitted with 11.2896MHz crystal. It will program the
+	 *	PLL for 140MHz. Lets go fast :-)
+	 */
+	movel	#0x125a40f0,%d0			/* set for 140MHz */
+	movel	%d0,0x180(%a1)			/* set PLL register */
+	orl	#0x1,%d0
+	movel	%d0,0x180(%a1)			/* set PLL register */
+#endif
+
+	/*
+	 *	Setup CS1 for ethernet controller.
+	 *	(Setup as per M5249C3 doco).
+	 */
+	movel  #0xe0000000,%d0			/* CS1 mapped at 0xe0000000 */
+	movel  %d0,0x8c(%a0)
+	movel  #0x001f0021,%d0			/* CS1 size of 1Mb */
+	movel  %d0,0x90(%a0)
+	movew  #0x0080,%d0			/* CS1 = 16bit port, AA */
+	movew  %d0,0x96(%a0)
+
+	/*
+	 *	Setup CS2 for IDE interface.
+	 */
+	movel	#0x50000000,%d0			/* CS2 mapped at 0x50000000 */
+	movel	%d0,0x98(%a0)
+	movel	#0x001f0001,%d0			/* CS2 size of 1MB */
+	movel	%d0,0x9c(%a0)
+	movew	#0x0080,%d0			/* CS2 = 16bit, TA */
+	movew	%d0,0xa2(%a0)
+
+	movel	#0x00107000,%d0			/* IDEconfig1 */
+	movel	%d0,0x18c(%a1)
+	movel	#0x000c0400,%d0			/* IDEconfig2 */
+	movel	%d0,0x190(%a1)
+
+	movel	#0x00080000,%d0			/* GPIO19, IDE reset bit */
+	orl	%d0,0xc(%a1)			/* function GPIO19 */
+	orl	%d0,0x8(%a1)			/* enable GPIO19 as output */
+        orl	%d0,0x4(%a1)			/* de-assert IDE reset */
+.endm
+
+#define	PLATFORM_SETUP	m5249c3_setup
+
+#endif /* __ASSEMBLER__ */
+
+/****************************************************************************/
+#endif	/* m5249sim_h */

include/asm-m68knommu/m5272sim.h

@@ -0,0 +1,79 @@
+/****************************************************************************/
+
+/*
+ *	m5272sim.h -- ColdFire 5272 System Integration Module support.
+ *
+ *	(C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
+ * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef	m5272sim_h
+#define	m5272sim_h
+/****************************************************************************/
+
+#include <linux/config.h>
+
+/*
+ *	Define the 5272 SIM register set addresses.
+ */
+#define	MCFSIM_SCR		0x04		/* SIM Config reg (r/w) */
+#define	MCFSIM_SPR		0x06		/* System Protection reg (r/w)*/
+#define	MCFSIM_PMR		0x08		/* Power Management reg (r/w) */
+#define	MCFSIM_APMR		0x0e		/* Active Low Power reg (r/w) */
+#define	MCFSIM_DIR		0x10		/* Device Identity reg (r/w) */
+
+#define	MCFSIM_ICR1		0x20		/* Intr Ctrl reg 1 (r/w) */
+#define	MCFSIM_ICR2		0x24		/* Intr Ctrl reg 2 (r/w) */
+#define	MCFSIM_ICR3		0x28		/* Intr Ctrl reg 3 (r/w) */
+#define	MCFSIM_ICR4		0x2c		/* Intr Ctrl reg 4 (r/w) */
+
+#define MCFSIM_ISR		0x30		/* Interrupt Source reg (r/w) */
+#define MCFSIM_PITR		0x34		/* Interrupt Transition (r/w) */
+#define	MCFSIM_PIWR		0x38		/* Interrupt Wakeup reg (r/w) */
+#define	MCFSIM_PIVR		0x3f		/* Interrupt Vector reg (r/w( */
+
+#define	MCFSIM_WRRR		0x280		/* Watchdog reference (r/w) */
+#define	MCFSIM_WIRR		0x284		/* Watchdog interrupt (r/w) */
+#define	MCFSIM_WCR		0x288		/* Watchdog counter (r/w) */
+#define	MCFSIM_WER		0x28c		/* Watchdog event (r/w) */
+
+#define	MCFSIM_CSBR0		0x40		/* CS0 Base Address (r/w) */
+#define	MCFSIM_CSOR0		0x44		/* CS0 Option (r/w) */
+#define	MCFSIM_CSBR1		0x48		/* CS1 Base Address (r/w) */
+#define	MCFSIM_CSOR1		0x4c		/* CS1 Option (r/w) */
+#define	MCFSIM_CSBR2		0x50		/* CS2 Base Address (r/w) */
+#define	MCFSIM_CSOR2		0x54		/* CS2 Option (r/w) */
+#define	MCFSIM_CSBR3		0x58		/* CS3 Base Address (r/w) */
+#define	MCFSIM_CSOR3		0x5c		/* CS3 Option (r/w) */
+#define	MCFSIM_CSBR4		0x60		/* CS4 Base Address (r/w) */
+#define	MCFSIM_CSOR4		0x64		/* CS4 Option (r/w) */
+#define	MCFSIM_CSBR5		0x68		/* CS5 Base Address (r/w) */
+#define	MCFSIM_CSOR5		0x6c		/* CS5 Option (r/w) */
+#define	MCFSIM_CSBR6		0x70		/* CS6 Base Address (r/w) */
+#define	MCFSIM_CSOR6		0x74		/* CS6 Option (r/w) */
+#define	MCFSIM_CSBR7		0x78		/* CS7 Base Address (r/w) */
+#define	MCFSIM_CSOR7		0x7c		/* CS7 Option (r/w) */
+
+#define	MCFSIM_SDCR		0x180		/* SDRAM Configuration (r/w) */
+#define	MCFSIM_SDTR		0x184		/* SDRAM Timing (r/w) */
+#define	MCFSIM_DCAR0		0x4c		/* DRAM 0 Address reg(r/w) */
+#define	MCFSIM_DCMR0		0x50		/* DRAM 0 Mask reg (r/w) */
+#define	MCFSIM_DCCR0		0x57		/* DRAM 0 Control reg (r/w) */
+#define	MCFSIM_DCAR1		0x58		/* DRAM 1 Address reg (r/w) */
+#define	MCFSIM_DCMR1		0x5c		/* DRAM 1 Mask reg (r/w) */
+#define	MCFSIM_DCCR1		0x63		/* DRAM 1 Control reg (r/w) */
+
+#define	MCFSIM_PACNT		0x80		/* Port A Control (r/w) */
+#define	MCFSIM_PADDR		0x84		/* Port A Direction (r/w) */
+#define	MCFSIM_PADAT		0x86		/* Port A Data (r/w) */
+#define	MCFSIM_PBCNT		0x88		/* Port B Control (r/w) */
+#define	MCFSIM_PBDDR		0x8c		/* Port B Direction (r/w) */
+#define	MCFSIM_PBDAT		0x8e		/* Port B Data (r/w) */
+#define	MCFSIM_PCDDR		0x94		/* Port C Direction (r/w) */
+#define	MCFSIM_PCDAT		0x96		/* Port C Data (r/w) */
+#define	MCFSIM_PDCNT		0x98		/* Port D Control (r/w) */
+
+
+/****************************************************************************/
+#endif	/* m5272sim_h */

include/asm-m68knommu/m527xsim.h

@@ -0,0 +1,58 @@
+/****************************************************************************/
+
+/*
+ *	m527xsim.h -- ColdFire 5270/5271 System Integration Module support.
+ *
+ *	(C) Copyright 2004, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef	m527xsim_h
+#define	m527xsim_h
+/****************************************************************************/
+
+#include <linux/config.h>
+
+/*
+ *	Define the 5270/5271 SIM register set addresses.
+ */
+#define	MCFICM_INTC0		0x0c00		/* Base for Interrupt Ctrl 0 */
+#define	MCFICM_INTC1		0x0d00		/* Base for Interrupt Ctrl 1 */
+#define	MCFINTC_IPRH		0x00		/* Interrupt pending 32-63 */
+#define	MCFINTC_IPRL		0x04		/* Interrupt pending 1-31 */
+#define	MCFINTC_IMRH		0x08		/* Interrupt mask 32-63 */
+#define	MCFINTC_IMRL		0x0c		/* Interrupt mask 1-31 */
+#define	MCFINTC_INTFRCH		0x10		/* Interrupt force 32-63 */
+#define	MCFINTC_INTFRCL		0x14		/* Interrupt force 1-31 */
+#define	MCFINTC_IRLR		0x18		/* */
+#define	MCFINTC_IACKL		0x19		/* */
+#define	MCFINTC_ICR0		0x40		/* Base ICR register */
+
+#define	MCFINT_VECBASE		64		/* Vector base number */
+#define	MCFINT_UART0		13		/* Interrupt number for UART0 */
+#define	MCFINT_UART1		14		/* Interrupt number for UART1 */
+#define	MCFINT_UART2		15		/* Interrupt number for UART2 */
+#define	MCFINT_PIT1		36		/* Interrupt number for PIT1 */
+
+/*
+ *	SDRAM configuration registers.
+ */
+#ifdef CONFIG_M5271EVB
+#define	MCFSIM_DCR		0x40		/* SDRAM control */
+#define	MCFSIM_DACR0		0x48		/* SDRAM base address 0 */
+#define	MCFSIM_DMR0		0x4c		/* SDRAM address mask 0 */
+#define	MCFSIM_DACR1		0x50		/* SDRAM base address 1 */
+#define	MCFSIM_DMR1		0x54		/* SDRAM address mask 1 */
+#else
+#define	MCFSIM_DMR		0x40		/* SDRAM mode */
+#define	MCFSIM_DCR		0x44		/* SDRAM control */
+#define	MCFSIM_DCFG1		0x48		/* SDRAM configuration 1 */
+#define	MCFSIM_DCFG2		0x4c		/* SDRAM configuration 2 */
+#define	MCFSIM_DBAR0		0x50		/* SDRAM base address 0 */
+#define	MCFSIM_DMR0		0x54		/* SDRAM address mask 0 */
+#define	MCFSIM_DBAR1		0x58		/* SDRAM base address 1 */
+#define	MCFSIM_DMR1		0x5c		/* SDRAM address mask 1 */
+#endif
+
+/****************************************************************************/
+#endif	/* m527xsim_h */

include/asm-m68knommu/m528xsim.h

@@ -0,0 +1,45 @@
+/****************************************************************************/
+
+/*
+ *	m528xsim.h -- ColdFire 5280/5282 System Integration Module support.
+ *
+ *	(C) Copyright 2003, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef	m528xsim_h
+#define	m528xsim_h
+/****************************************************************************/
+
+#include <linux/config.h>
+
+/*
+ *	Define the 5280/5282 SIM register set addresses.
+ */
+#define	MCFICM_INTC0		0x0c00		/* Base for Interrupt Ctrl 0 */
+#define	MCFICM_INTC1		0x0d00		/* Base for Interrupt Ctrl 0 */
+#define	MCFINTC_IPRH		0x00		/* Interrupt pending 32-63 */
+#define	MCFINTC_IPRL		0x04		/* Interrupt pending 1-31 */
+#define	MCFINTC_IMRH		0x08		/* Interrupt mask 32-63 */
+#define	MCFINTC_IMRL		0x0c		/* Interrupt mask 1-31 */
+#define	MCFINTC_INTFRCH		0x10		/* Interrupt force 32-63 */
+#define	MCFINTC_INTFRCL		0x14		/* Interrupt force 1-31 */
+#define	MCFINTC_IRLR		0x18		/* */
+#define	MCFINTC_IACKL		0x19		/* */
+#define	MCFINTC_ICR0		0x40		/* Base ICR register */
+
+#define	MCFINT_VECBASE		64		/* Vector base number */
+#define	MCFINT_UART0		13		/* Interrupt number for UART0 */
+#define	MCFINT_PIT1		55		/* Interrupt number for PIT1 */
+
+/*
+ *	SDRAM configuration registers.
+ */
+#define	MCFSIM_DCR		0x44		/* SDRAM control */
+#define	MCFSIM_DACR0		0x48		/* SDRAM base address 0 */
+#define	MCFSIM_DMR0		0x4c		/* SDRAM address mask 0 */
+#define	MCFSIM_DACR1		0x50		/* SDRAM base address 1 */
+#define	MCFSIM_DMR1		0x54		/* SDRAM address mask 1 */
+
+/****************************************************************************/
+#endif	/* m528xsim_h */

include/asm-m68knommu/m5307sim.h

@@ -0,0 +1,181 @@
+/****************************************************************************/
+
+/*
+ *	m5307sim.h -- ColdFire 5307 System Integration Module support.
+ *
+ *	(C) Copyright 1999,  Moreton Bay Ventures Pty Ltd.
+ *	(C) Copyright 1999,  Lineo (www.lineo.com)
+ *
+ *      Modified by David W. Miller for the MCF5307 Eval Board.
+ */
+
+/****************************************************************************/
+#ifndef	m5307sim_h
+#define	m5307sim_h
+/****************************************************************************/
+
+/*
+ *	Define the 5307 SIM register set addresses.
+ */
+#define	MCFSIM_RSR		0x00		/* Reset Status reg (r/w) */
+#define	MCFSIM_SYPCR		0x01		/* System Protection reg (r/w)*/
+#define	MCFSIM_SWIVR		0x02		/* SW Watchdog intr reg (r/w) */
+#define	MCFSIM_SWSR		0x03		/* SW Watchdog service (r/w) */
+#define	MCFSIM_PAR		0x04		/* Pin Assignment reg (r/w) */
+#define	MCFSIM_IRQPAR		0x06		/* Interrupt Assignment reg (r/w) */
+#define	MCFSIM_PLLCR		0x08		/* PLL Controll Reg*/
+#define	MCFSIM_MPARK		0x0C		/* BUS Master Control Reg*/
+#define	MCFSIM_IPR		0x40		/* Interrupt Pend reg (r/w) */
+#define	MCFSIM_IMR		0x44		/* Interrupt Mask reg (r/w) */
+#define	MCFSIM_AVR		0x4b		/* Autovector Ctrl reg (r/w) */
+#define	MCFSIM_ICR0		0x4c		/* Intr Ctrl reg 0 (r/w) */
+#define	MCFSIM_ICR1		0x4d		/* Intr Ctrl reg 1 (r/w) */
+#define	MCFSIM_ICR2		0x4e		/* Intr Ctrl reg 2 (r/w) */
+#define	MCFSIM_ICR3		0x4f		/* Intr Ctrl reg 3 (r/w) */
+#define	MCFSIM_ICR4		0x50		/* Intr Ctrl reg 4 (r/w) */
+#define	MCFSIM_ICR5		0x51		/* Intr Ctrl reg 5 (r/w) */
+#define	MCFSIM_ICR6		0x52		/* Intr Ctrl reg 6 (r/w) */
+#define	MCFSIM_ICR7		0x53		/* Intr Ctrl reg 7 (r/w) */
+#define	MCFSIM_ICR8		0x54		/* Intr Ctrl reg 8 (r/w) */
+#define	MCFSIM_ICR9		0x55		/* Intr Ctrl reg 9 (r/w) */
+#define	MCFSIM_ICR10		0x56		/* Intr Ctrl reg 10 (r/w) */
+#define	MCFSIM_ICR11		0x57		/* Intr Ctrl reg 11 (r/w) */
+
+#define MCFSIM_CSAR0		0x80		/* CS 0 Address 0 reg (r/w) */
+#define MCFSIM_CSMR0		0x84		/* CS 0 Mask 0 reg (r/w) */
+#define MCFSIM_CSCR0		0x8a		/* CS 0 Control reg (r/w) */
+#define MCFSIM_CSAR1		0x8c		/* CS 1 Address reg (r/w) */
+#define MCFSIM_CSMR1		0x90		/* CS 1 Mask reg (r/w) */
+#define MCFSIM_CSCR1		0x96		/* CS 1 Control reg (r/w) */
+
+#ifdef CONFIG_OLDMASK
+#define MCFSIM_CSBAR		0x98		/* CS Base Address reg (r/w) */
+#define MCFSIM_CSBAMR		0x9c		/* CS Base Mask reg (r/w) */
+#define MCFSIM_CSMR2		0x9e		/* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
+#define MCFSIM_CSMR3		0xaa		/* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
+#define MCFSIM_CSMR4		0xb6		/* CS 4 Mask reg (r/w) */
+#define MCFSIM_CSCR4		0xba		/* CS 4 Control reg (r/w) */
+#define MCFSIM_CSMR5		0xc2		/* CS 5 Mask reg (r/w) */
+#define MCFSIM_CSCR5		0xc6		/* CS 5 Control reg (r/w) */
+#define MCFSIM_CSMR6		0xce		/* CS 6 Mask reg (r/w) */
+#define MCFSIM_CSCR6		0xd2		/* CS 6 Control reg (r/w) */
+#define MCFSIM_CSMR7		0xda		/* CS 7 Mask reg (r/w) */
+#define MCFSIM_CSCR7		0xde		/* CS 7 Control reg (r/w) */
+#else
+#define MCFSIM_CSAR2		0x98		/* CS 2 Adress reg (r/w) */
+#define MCFSIM_CSMR2		0x9c		/* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
+#define MCFSIM_CSAR3		0xa4		/* CS 3 Adress reg (r/w) */
+#define MCFSIM_CSMR3		0xa8		/* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
+#define MCFSIM_CSAR4		0xb0		/* CS 4 Adress reg (r/w) */
+#define MCFSIM_CSMR4		0xb4		/* CS 4 Mask reg (r/w) */
+#define MCFSIM_CSCR4		0xba		/* CS 4 Control reg (r/w) */
+#define MCFSIM_CSAR5		0xbc		/* CS 5 Adress reg (r/w) */
+#define MCFSIM_CSMR5		0xc0		/* CS 5 Mask reg (r/w) */
+#define MCFSIM_CSCR5		0xc6		/* CS 5 Control reg (r/w) */
+#define MCFSIM_CSAR6		0xc8		/* CS 6 Adress reg (r/w) */
+#define MCFSIM_CSMR6		0xcc		/* CS 6 Mask reg (r/w) */
+#define MCFSIM_CSCR6		0xd2		/* CS 6 Control reg (r/w) */
+#define MCFSIM_CSAR7		0xd4		/* CS 7 Adress reg (r/w) */
+#define MCFSIM_CSMR7		0xd8		/* CS 7 Mask reg (r/w) */
+#define MCFSIM_CSCR7		0xde		/* CS 7 Control reg (r/w) */
+#endif /* CONFIG_OLDMASK */
+
+#define MCFSIM_DCR		0x100		/* DRAM Control reg (r/w) */
+#define MCFSIM_DACR0		0x108		/* DRAM 0 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR0		0x10c		/* DRAM 0 Mask reg (r/w) */
+#define MCFSIM_DACR1		0x110		/* DRAM 1 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR1		0x114		/* DRAM 1 Mask reg (r/w) */
+
+#define	MCFSIM_PADDR		0x244		/* Parallel Direction (r/w) */
+#define	MCFSIM_PADAT		0x248		/* Parallel Data (r/w) */
+
+
+/* Definition offset address for CS2-7  -- old mask 5307 */
+
+#define	MCF5307_CS2		(0x400000)
+#define	MCF5307_CS3		(0x600000)
+#define	MCF5307_CS4		(0x800000)
+#define	MCF5307_CS5		(0xA00000)
+#define	MCF5307_CS6		(0xC00000)
+#define	MCF5307_CS7		(0xE00000)
+
+
+/*
+ *	Some symbol defines for the above...
+ */
+#define	MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
+#define	MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
+#define	MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
+#define	MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
+#define	MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
+#define	MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
+#define	MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
+#define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
+#define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
+
+#if defined(CONFIG_M5307)
+#define	MCFSIM_IMR_MASKALL	0x3fffe		/* All SIM intr sources */
+#endif
+
+/*
+ *	Macro to set IMR register. It is 32 bits on the 5307.
+ */
+#define	mcf_getimr()		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
+
+#define	mcf_setimr(imr)		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
+
+#define	mcf_getipr()		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
+
+
+/*
+ *	Some symbol defines for the Parallel Port Pin Assignment Register
+ */
+#define MCFSIM_PAR_DREQ0        0x40            /* Set to select DREQ0 input */
+                                                /* Clear to select par I/O */
+#define MCFSIM_PAR_DREQ1        0x20            /* Select DREQ1 input */
+                                                /* Clear to select par I/O */
+
+/*
+ *       Defines for the IRQPAR Register
+ */
+#define IRQ5_LEVEL4	0x80
+#define IRQ3_LEVEL6	0x40
+#define IRQ1_LEVEL2	0x20
+
+
+/*
+ *	Define the Cache register flags.
+ */
+#define	CACR_EC			(1<<31)
+#define	CACR_ESB		(1<<29)
+#define	CACR_DPI		(1<<28)
+#define	CACR_HLCK		(1<<27)
+#define	CACR_CINVA		(1<<24)
+#define	CACR_DNFB		(1<<10)
+#define	CACR_DCM_WTHRU		(0<<8)
+#define	CACR_DCM_WBACK		(1<<8)
+#define	CACR_DCM_OFF_PRE	(2<<8)
+#define	CACR_DCM_OFF_IMP	(3<<8)
+#define	CACR_DW			(1<<5)
+
+#define	ACR_BASE_POS		24
+#define	ACR_MASK_POS		16
+#define	ACR_ENABLE		(1<<15)
+#define	ACR_USER		(0<<13)
+#define	ACR_SUPER		(1<<13)
+#define	ACR_ANY			(2<<13)
+#define	ACR_CM_WTHRU		(0<<5)
+#define	ACR_CM_WBACK		(1<<5)
+#define	ACR_CM_OFF_PRE		(2<<5)
+#define	ACR_CM_OFF_IMP		(3<<5)
+#define	ACR_WPROTECT		(1<<2)
+
+/****************************************************************************/
+#endif	/* m5307sim_h */

include/asm-m68knommu/m5407sim.h

@@ -0,0 +1,157 @@
+/****************************************************************************/
+
+/*
+ *	m5407sim.h -- ColdFire 5407 System Integration Module support.
+ *
+ *	(C) Copyright 2000,  Lineo (www.lineo.com)
+ *	(C) Copyright 1999,  Moreton Bay Ventures Pty Ltd.
+ *
+ *      Modified by David W. Miller for the MCF5307 Eval Board.
+ */
+
+/****************************************************************************/
+#ifndef	m5407sim_h
+#define	m5407sim_h
+/****************************************************************************/
+
+/*
+ *	Define the 5407 SIM register set addresses.
+ */
+#define	MCFSIM_RSR		0x00		/* Reset Status reg (r/w) */
+#define	MCFSIM_SYPCR		0x01		/* System Protection reg (r/w)*/
+#define	MCFSIM_SWIVR		0x02		/* SW Watchdog intr reg (r/w) */
+#define	MCFSIM_SWSR		0x03		/* SW Watchdog service (r/w) */
+#define	MCFSIM_PAR		0x04		/* Pin Assignment reg (r/w) */
+#define	MCFSIM_IRQPAR		0x06		/* Interrupt Assignment reg (r/w) */
+#define	MCFSIM_PLLCR		0x08		/* PLL Controll Reg*/
+#define	MCFSIM_MPARK		0x0C		/* BUS Master Control Reg*/
+#define	MCFSIM_IPR		0x40		/* Interrupt Pend reg (r/w) */
+#define	MCFSIM_IMR		0x44		/* Interrupt Mask reg (r/w) */
+#define	MCFSIM_AVR		0x4b		/* Autovector Ctrl reg (r/w) */
+#define	MCFSIM_ICR0		0x4c		/* Intr Ctrl reg 0 (r/w) */
+#define	MCFSIM_ICR1		0x4d		/* Intr Ctrl reg 1 (r/w) */
+#define	MCFSIM_ICR2		0x4e		/* Intr Ctrl reg 2 (r/w) */
+#define	MCFSIM_ICR3		0x4f		/* Intr Ctrl reg 3 (r/w) */
+#define	MCFSIM_ICR4		0x50		/* Intr Ctrl reg 4 (r/w) */
+#define	MCFSIM_ICR5		0x51		/* Intr Ctrl reg 5 (r/w) */
+#define	MCFSIM_ICR6		0x52		/* Intr Ctrl reg 6 (r/w) */
+#define	MCFSIM_ICR7		0x53		/* Intr Ctrl reg 7 (r/w) */
+#define	MCFSIM_ICR8		0x54		/* Intr Ctrl reg 8 (r/w) */
+#define	MCFSIM_ICR9		0x55		/* Intr Ctrl reg 9 (r/w) */
+#define	MCFSIM_ICR10		0x56		/* Intr Ctrl reg 10 (r/w) */
+#define	MCFSIM_ICR11		0x57		/* Intr Ctrl reg 11 (r/w) */
+
+#define MCFSIM_CSAR0		0x80		/* CS 0 Address 0 reg (r/w) */
+#define MCFSIM_CSMR0		0x84		/* CS 0 Mask 0 reg (r/w) */
+#define MCFSIM_CSCR0		0x8a		/* CS 0 Control reg (r/w) */
+#define MCFSIM_CSAR1		0x8c		/* CS 1 Address reg (r/w) */
+#define MCFSIM_CSMR1		0x90		/* CS 1 Mask reg (r/w) */
+#define MCFSIM_CSCR1		0x96		/* CS 1 Control reg (r/w) */
+
+#define MCFSIM_CSAR2		0x98		/* CS 2 Adress reg (r/w) */
+#define MCFSIM_CSMR2		0x9c		/* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2		0xa2		/* CS 2 Control reg (r/w) */
+#define MCFSIM_CSAR3		0xa4		/* CS 3 Adress reg (r/w) */
+#define MCFSIM_CSMR3		0xa8		/* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
+#define MCFSIM_CSAR4		0xb0		/* CS 4 Adress reg (r/w) */
+#define MCFSIM_CSMR4		0xb4		/* CS 4 Mask reg (r/w) */
+#define MCFSIM_CSCR4		0xba		/* CS 4 Control reg (r/w) */
+#define MCFSIM_CSAR5		0xbc		/* CS 5 Adress reg (r/w) */
+#define MCFSIM_CSMR5		0xc0		/* CS 5 Mask reg (r/w) */
+#define MCFSIM_CSCR5		0xc6		/* CS 5 Control reg (r/w) */
+#define MCFSIM_CSAR6		0xc8		/* CS 6 Adress reg (r/w) */
+#define MCFSIM_CSMR6		0xcc		/* CS 6 Mask reg (r/w) */
+#define MCFSIM_CSCR6		0xd2		/* CS 6 Control reg (r/w) */
+#define MCFSIM_CSAR7		0xd4		/* CS 7 Adress reg (r/w) */
+#define MCFSIM_CSMR7		0xd8		/* CS 7 Mask reg (r/w) */
+#define MCFSIM_CSCR7		0xde		/* CS 7 Control reg (r/w) */
+
+#define MCFSIM_DCR		0x100		/* DRAM Control reg (r/w) */
+#define MCFSIM_DACR0		0x108		/* DRAM 0 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR0		0x10c		/* DRAM 0 Mask reg (r/w) */
+#define MCFSIM_DACR1		0x110		/* DRAM 1 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR1		0x114		/* DRAM 1 Mask reg (r/w) */
+
+#define	MCFSIM_PADDR		0x244		/* Parallel Direction (r/w) */
+#define	MCFSIM_PADAT		0x248		/* Parallel Data (r/w) */
+
+
+/*
+ *	Some symbol defines for the above...
+ */
+#define	MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
+#define	MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
+#define	MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
+#define	MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
+#define	MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
+#define	MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
+#define	MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
+#define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
+#define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
+
+/*
+ *	Macro to set IMR register. It is 32 bits on the 5407.
+ */
+#define	mcf_getimr()		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
+
+#define	mcf_setimr(imr)		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
+
+#define	mcf_getipr()		\
+	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
+
+
+/*
+ *	Some symbol defines for the Parallel Port Pin Assignment Register
+ */
+#define MCFSIM_PAR_DREQ0        0x40            /* Set to select DREQ0 input */
+                                                /* Clear to select par I/O */
+#define MCFSIM_PAR_DREQ1        0x20            /* Select DREQ1 input */
+                                                /* Clear to select par I/O */
+
+/*
+ *       Defines for the IRQPAR Register
+ */
+#define IRQ5_LEVEL4	0x80
+#define IRQ3_LEVEL6	0x40
+#define IRQ1_LEVEL2	0x20
+
+
+/*
+ *	Define the Cache register flags.
+ */
+#define	CACR_DEC		0x80000000	/* Enable data cache */
+#define	CACR_DWP		0x40000000	/* Data write protection */
+#define	CACR_DESB		0x20000000	/* Enable data store buffer */
+#define	CACR_DDPI		0x10000000	/* Disable CPUSHL */
+#define	CACR_DHCLK		0x08000000	/* Half data cache lock mode */
+#define	CACR_DDCM_WT		0x00000000	/* Write through cache*/
+#define	CACR_DDCM_CP		0x02000000	/* Copyback cache */
+#define	CACR_DDCM_P		0x04000000	/* No cache, precise */
+#define	CACR_DDCM_IMP		0x06000000	/* No cache, imprecise */
+#define	CACR_DCINVA		0x01000000	/* Invalidate data cache */
+#define	CACR_BEC		0x00080000	/* Enable branch cache */
+#define	CACR_BCINVA		0x00040000	/* Invalidate branch cache */
+#define	CACR_IEC		0x00008000	/* Enable instruction cache */
+#define	CACR_DNFB		0x00002000	/* Inhibited fill buffer */
+#define	CACR_IDPI		0x00001000	/* Disable CPUSHL */
+#define	CACR_IHLCK		0x00000800	/* Intruction cache half lock */
+#define	CACR_IDCM		0x00000400	/* Intruction cache inhibit */
+#define	CACR_ICINVA		0x00000100	/* Invalidate instr cache */
+
+#define	ACR_BASE_POS		24		/* Address Base */
+#define	ACR_MASK_POS		16		/* Address Mask */
+#define	ACR_ENABLE		0x00008000	/* Enable address */
+#define	ACR_USER		0x00000000	/* User mode access only */
+#define	ACR_SUPER		0x00002000	/* Supervisor mode only */
+#define	ACR_ANY			0x00004000	/* Match any access mode */
+#define	ACR_CM_WT		0x00000000	/* Write through mode */
+#define	ACR_CM_CP		0x00000020	/* Copyback mode */
+#define	ACR_CM_OFF_PRE		0x00000040	/* No cache, precise */
+#define	ACR_CM_OFF_IMP		0x00000060	/* No cache, imprecise */
+#define	ACR_WPROTECT		0x00000004	/* Write protect */
+
+/****************************************************************************/
+#endif	/* m5407sim_h */

include/asm-m68knommu/m68360.h

@@ -0,0 +1,5 @@
+#include "m68360_regs.h"
+#include "m68360_pram.h"
+#include "m68360_quicc.h"
+#include "m68360_enet.h"
+

include/asm-m68knommu/m68360_enet.h

@@ -0,0 +1,177 @@
+/***********************************
+ * $Id: m68360_enet.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Definitions for the ETHERNET controllers
+ ***************************************
+ */
+
+#ifndef __ETHER_H
+#define __ETHER_H
+
+#include "quicc_simple.h"
+
+/*
+ * transmit BD's
+ */
+#define T_R     0x8000          /* ready bit */
+#define E_T_PAD 0x4000          /* short frame padding */
+#define T_W     0x2000          /* wrap bit */
+#define T_I     0x1000          /* interrupt on completion */
+#define T_L     0x0800          /* last in frame */
+#define T_TC    0x0400          /* transmit CRC (when last) */
+
+#define T_DEF   0x0200          /* defer indication */
+#define T_HB    0x0100          /* heartbeat */
+#define T_LC    0x0080          /* error: late collision */
+#define T_RL    0x0040          /* error: retransmission limit */
+#define T_RC    0x003c          /* retry count */
+#define T_UN    0x0002          /* error: underrun */
+#define T_CSL   0x0001          /* carier sense lost */
+#define T_ERROR (T_HB | T_LC | T_RL | T_UN | T_CSL)
+
+/*
+ * receive BD's
+ */
+#define R_E     0x8000          /* buffer empty */
+#define R_W     0x2000          /* wrap bit */
+#define R_I     0x1000          /* interrupt on reception */
+#define R_L     0x0800          /* last BD in frame */
+#define R_F     0x0400          /* first BD in frame */
+#define R_M     0x0100          /* received because of promisc. mode */
+
+#define R_LG    0x0020          /* frame too long */
+#define R_NO    0x0010          /* non-octet aligned */
+#define R_SH    0x0008          /* short frame */
+#define R_CR    0x0004          /* receive CRC error */
+#define R_OV    0x0002          /* receive overrun */
+#define R_CL    0x0001          /* collision */
+#define ETHER_R_ERROR (R_LG | R_NO | R_SH | R_CR | R_OV | R_CL)
+
+
+/*
+ * ethernet interrupts
+ */
+#define ETHERNET_GRA    0x0080  /* graceful stop complete */
+#define ETHERNET_TXE    0x0010  /* transmit error         */
+#define ETHERNET_RXF    0x0008  /* receive frame          */
+#define ETHERNET_BSY    0x0004  /* busy condition         */
+#define ETHERNET_TXB    0x0002  /* transmit buffer        */
+#define ETHERNET_RXB    0x0001  /* receive buffer         */
+
+/*
+ * ethernet protocol specific mode register (PSMR)
+ */
+#define ETHER_HBC       0x8000    /* heartbeat checking      */
+#define ETHER_FC        0x4000    /* force collision         */
+#define ETHER_RSH       0x2000    /* receive short frames    */
+#define ETHER_IAM       0x1000    /* individual address mode */
+#define ETHER_CRC_32    (0x2<<10) /* Enable CRC              */
+#define ETHER_PRO       0x0200    /* promiscuous             */
+#define ETHER_BRO       0x0100    /* broadcast address       */
+#define ETHER_SBT       0x0080    /* stop backoff timer      */
+#define ETHER_LPB       0x0040    /* Loop Back Mode          */
+#define ETHER_SIP       0x0020    /* sample input pins       */
+#define ETHER_LCW       0x0010    /* late collision window   */
+#define ETHER_NIB_13    (0x0<<1)  /* # of ignored bits 13    */
+#define ETHER_NIB_14    (0x1<<1)  /* # of ignored bits 14    */
+#define ETHER_NIB_15    (0x2<<1)  /* # of ignored bits 15    */
+#define ETHER_NIB_16    (0x3<<1)  /* # of ignored bits 16    */
+#define ETHER_NIB_21    (0x4<<1)  /* # of ignored bits 21    */
+#define ETHER_NIB_22    (0x5<<1)  /* # of ignored bits 22    */
+#define ETHER_NIB_23    (0x6<<1)  /* # of ignored bits 23    */
+#define ETHER_NIB_24    (0x7<<1)  /* # of ignored bits 24    */
+
+/*
+ * ethernet specific parameters
+ */
+#define CRC_WORD 4          /* Length in bytes of CRC */               
+#define C_PRES   0xffffffff /* preform 32 bit CRC */
+#define C_MASK   0xdebb20e3 /* comply with 32 bit CRC */       
+#define CRCEC    0x00000000
+#define ALEC     0x00000000
+#define DISFC    0x00000000
+#define PADS     0x00000000
+#define RET_LIM  0x000f     /* retry 15 times to send a frame before interrupt */
+#define ETH_MFLR 0x05ee     /* 1518 max frame size */
+#define MINFLR   0x0040     /* Minimum frame size 64 */
+#define MAXD1    0x05ee     /* Max dma count 1518 */
+#define MAXD2    0x05ee
+#define GADDR1   0x00000000 /* Clear group address */  
+#define GADDR2   0x00000000
+#define GADDR3   0x00000000    
+#define GADDR4   0x00000000    
+#define P_PER    0x00000000 /*not used */              
+#define IADDR1   0x00000000 /* Individual hash table not used */       
+#define IADDR2   0x00000000
+#define IADDR3   0x00000000    
+#define IADDR4   0x00000000            
+#define TADDR_H  0x00000000 /* clear this regs */              
+#define TADDR_M  0x00000000            
+#define TADDR_L  0x00000000            
+
+/*       SCC Parameter Ram */
+#define RFCR    0x18 /* normal operation */
+#define TFCR    0x18 /* normal operation */
+#define E_MRBLR 1518 /* Max ethernet frame length */
+
+/*
+ * ethernet specific structure
+ */
+typedef union {
+        unsigned char b[6];
+        struct {
+            unsigned short high;
+            unsigned short middl;
+            unsigned short low;
+        } w;
+} ETHER_ADDR;
+
+typedef struct {
+    int        max_frame_length;
+    int        promisc_mode;
+    int        reject_broadcast;
+    ETHER_ADDR phys_adr;
+} ETHER_SPECIFIC;
+
+typedef struct {
+    ETHER_ADDR     dst_addr;
+    ETHER_ADDR     src_addr;
+    unsigned short type_or_len;
+    unsigned char  data[1];
+} ETHER_FRAME;
+
+#define MAX_DATALEN 1500
+typedef struct {
+    ETHER_ADDR     dst_addr;
+    ETHER_ADDR     src_addr;
+    unsigned short type_or_len;
+    unsigned char  data[MAX_DATALEN];
+    unsigned char  fcs[CRC_WORD];
+} ETHER_MAX_FRAME;
+
+
+/*
+ * Internal ethernet function prototypes
+ */
+void        ether_interrupt(int scc_num);
+/* mleslie: debug */
+/* static void ethernet_rx_internal(int scc_num); */
+/* static void ethernet_tx_internal(int scc_num); */
+
+/*
+ * User callable routines prototypes (ethernet specific)
+ */
+void ethernet_init(int                       scc_number,
+                   alloc_routine             *alloc_buffer,
+                   free_routine              *free_buffer,
+                   store_rx_buffer_routine   *store_rx_buffer,
+                   handle_tx_error_routine   *handle_tx_error,
+                   handle_rx_error_routine   *handle_rx_error,
+                   handle_lost_error_routine *handle_lost_error,
+                   ETHER_SPECIFIC            *ether_spec);
+int  ethernet_tx(int scc_number, void *buf, int length);
+
+#endif
+

include/asm-m68knommu/m68360_pram.h

@@ -0,0 +1,431 @@
+/***********************************
+ * $Id: m68360_pram.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Definitions of the parameter area RAM.
+ * Note that different structures are overlaid
+ * at the same offsets for the different modes
+ * of operation.
+ ***************************************
+ */
+
+#ifndef __PRAM_H
+#define __PRAM_H
+
+/* Time slot assignment table */
+#define VALID_SLOT	0x8000
+#define WRAP_SLOT	0x4000
+
+/*****************************************************************
+        Global Multichannel parameter RAM
+*****************************************************************/
+struct global_multi_pram {
+    /*
+     * Global Multichannel parameter RAM
+     */
+    unsigned long   mcbase;		/* Multichannel Base pointer */
+    unsigned short  qmcstate;		/* Multichannel Controller state */
+    unsigned short  mrblr;		/* Maximum Receive Buffer Length */
+    unsigned short  tx_s_ptr;		/* TSTATx Pointer */
+    unsigned short  rxptr;		/* Current Time slot entry in TSATRx */
+    unsigned short  grfthr;		/* Global Receive frame threshold */
+    unsigned short  grfcnt;		/* Global Receive Frame Count */
+    unsigned long   intbase;		/* Multichannel Base address */
+    unsigned long   iintptr;		/* Pointer to interrupt queue */
+    unsigned short  rx_s_ptr;		/* TSTARx Pointer */
+
+    unsigned short  txptr;		/* Current Time slot entry in TSATTx */
+    unsigned long   c_mask32;		/* CRC Constant (debb20e3) */
+    unsigned short  tsatrx[32];		/* Time Slot Assignment Table Rx */
+    unsigned short  tsattx[32];		/* Time Slot Assignment Table Tx */
+    unsigned short  c_mask16;		/* CRC Constant (f0b8) */
+};
+
+/*****************************************************************
+        Quicc32 HDLC parameter RAM
+*****************************************************************/
+struct quicc32_pram {
+
+    unsigned short  tbase;		/* Tx Buffer Descriptors Base Address */
+    unsigned short  chamr;		/* Channel Mode Register */
+    unsigned long   tstate;		/* Tx Internal State */
+    unsigned long   txintr;		/* Tx Internal Data Pointer */
+    unsigned short  tbptr;		/* Tx Buffer Descriptor Pointer */
+    unsigned short  txcntr;		/* Tx Internal Byte Count */
+    unsigned long   tupack;		/* (Tx Temp) */
+    unsigned long   zistate;		/* Zero Insertion machine state */
+    unsigned long   tcrc;		/* Temp Transmit CRC */
+    unsigned short  intmask;		/* Channel's interrupt mask flags */
+    unsigned short  bdflags;		
+    unsigned short  rbase;		/* Rx Buffer Descriptors Base Address */
+    unsigned short  mflr;		/* Max Frame Length Register */
+    unsigned long   rstate;		/* Rx Internal State */
+    unsigned long   rxintr;		/* Rx Internal Data Pointer */
+    unsigned short  rbptr;		/* Rx Buffer Descriptor Pointer */
+    unsigned short  rxbyc;		/* Rx Internal Byte Count */
+    unsigned long   rpack;		/* (Rx Temp) */
+    unsigned long   zdstate;		/* Zero Deletion machine state */
+    unsigned long   rcrc;		/* Temp Transmit CRC */
+    unsigned short  maxc;		/* Max_length counter */
+    unsigned short  tmp_mb;		/* Temp */
+};
+
+
+/*****************************************************************
+        HDLC parameter RAM
+*****************************************************************/
+
+struct hdlc_pram {
+    /*
+     * SCC parameter RAM
+     */
+    unsigned short  rbase;          /* RX BD base address */
+    unsigned short  tbase;          /* TX BD base address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned long   rcrc;           /* temp receive CRC */
+    unsigned long   tcrc;           /* temp transmit CRC */
+   
+    /*
+     * HDLC specific parameter RAM
+     */
+    unsigned char   RESERVED1[4];   /* Reserved area */
+    unsigned long   c_mask;         /* CRC constant */
+    unsigned long   c_pres;         /* CRC preset */
+    unsigned short  disfc;          /* discarded frame counter */
+    unsigned short  crcec;          /* CRC error counter */
+    unsigned short  abtsc;          /* abort sequence counter */
+    unsigned short  nmarc;          /* nonmatching address rx cnt */
+    unsigned short  retrc;          /* frame retransmission cnt */
+    unsigned short  mflr;           /* maximum frame length reg */
+    unsigned short  max_cnt;        /* maximum length counter */
+    unsigned short  rfthr;          /* received frames threshold */
+    unsigned short  rfcnt;          /* received frames count */
+    unsigned short  hmask;          /* user defined frm addr mask */
+    unsigned short  haddr1;         /* user defined frm address 1 */
+    unsigned short  haddr2;         /* user defined frm address 2 */
+    unsigned short  haddr3;         /* user defined frm address 3 */
+    unsigned short  haddr4;         /* user defined frm address 4 */
+    unsigned short  tmp;            /* temp */
+    unsigned short  tmp_mb;         /* temp */
+};
+
+
+
+/*****************************************************************
+        UART parameter RAM
+*****************************************************************/
+
+/*
+ * bits in uart control characters table
+ */
+#define CC_INVALID  0x8000          /* control character is valid */
+#define CC_REJ      0x4000          /* don't store char in buffer */
+#define CC_CHAR     0x00ff          /* control character */
+
+/* UART */
+struct uart_pram {
+    /*
+     * SCC parameter RAM
+     */
+    unsigned short  rbase;          /* RX BD base address */
+    unsigned short  tbase;          /* TX BD base address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rx_temp;        /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned long   rcrc;           /* temp receive CRC */
+    unsigned long   tcrc;           /* temp transmit CRC */
+   
+    /*
+     * UART specific parameter RAM
+     */
+    unsigned char   RESERVED1[8];   /* Reserved area */
+    unsigned short  max_idl;        /* maximum idle characters */
+    unsigned short  idlc;           /* rx idle counter (internal) */
+    unsigned short  brkcr;          /* break count register */
+                   
+    unsigned short  parec;          /* Rx parity error counter */
+    unsigned short  frmer;          /* Rx framing error counter */
+    unsigned short  nosec;          /* Rx noise counter */
+    unsigned short  brkec;          /* Rx break character counter */
+    unsigned short  brkln;          /* Reaceive break length */
+                   
+    unsigned short  uaddr1;         /* address character 1 */
+    unsigned short  uaddr2;         /* address character 2 */
+    unsigned short  rtemp;          /* temp storage */
+    unsigned short  toseq;          /* Tx out of sequence char */
+    unsigned short  cc[8];          /* Rx control characters */
+    unsigned short  rccm;           /* Rx control char mask */
+    unsigned short  rccr;           /* Rx control char register */
+    unsigned short  rlbc;           /* Receive last break char */
+};
+
+
+
+/*****************************************************************
+        BISYNC parameter RAM
+*****************************************************************/
+
+struct bisync_pram {
+    /*
+     * SCC parameter RAM
+     */
+    unsigned short  rbase;          /* RX BD base address */
+    unsigned short  tbase;          /* TX BD base address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned long   rcrc;           /* temp receive CRC */
+    unsigned long   tcrc;           /* temp transmit CRC */
+   
+    /*
+     * BISYNC specific parameter RAM
+     */
+    unsigned char   RESERVED1[4];   /* Reserved area */
+    unsigned long   crcc;           /* CRC Constant Temp Value */
+    unsigned short  prcrc;          /* Preset Receiver CRC-16/LRC */
+    unsigned short  ptcrc;          /* Preset Transmitter CRC-16/LRC */
+    unsigned short  parec;          /* Receive Parity Error Counter */
+    unsigned short  bsync;          /* BISYNC SYNC Character */
+    unsigned short  bdle;           /* BISYNC DLE Character */
+    unsigned short  cc[8];          /* Rx control characters */
+    unsigned short  rccm;           /* Receive Control Character Mask */
+};
+
+/*****************************************************************
+        IOM2 parameter RAM
+        (overlaid on tx bd[5] of SCC channel[2])
+*****************************************************************/
+struct iom2_pram {
+    unsigned short  ci_data;        /* ci data */
+    unsigned short  monitor_data;   /* monitor data */
+    unsigned short  tstate;         /* transmitter state */
+    unsigned short  rstate;         /* receiver state */
+};
+
+/*****************************************************************
+        SPI/SMC parameter RAM
+        (overlaid on tx bd[6,7] of SCC channel[2])
+*****************************************************************/
+
+#define SPI_R       0x8000          /* Ready bit in BD */
+
+struct spi_pram {
+    unsigned short  rbase;          /* Rx BD Base Address */
+    unsigned short  tbase;          /* Tx BD Base Address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+};
+
+struct smc_uart_pram {
+    unsigned short  rbase;          /* Rx BD Base Address */
+    unsigned short  tbase;          /* Tx BD Base Address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned short  max_idl;        /* Maximum IDLE Characters */
+    unsigned short  idlc;           /* Temporary IDLE Counter */
+    unsigned short  brkln;          /* Last Rx Break Length */
+    unsigned short  brkec;          /* Rx Break Condition Counter */
+    unsigned short  brkcr;          /* Break Count Register (Tx) */
+    unsigned short  r_mask;         /* Temporary bit mask */
+};
+
+struct smc_trnsp_pram {
+    unsigned short  rbase;          /* rx BD Base Address */
+    unsigned short  tbase;          /* Tx BD Base Address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned short  reserved[5];    /* Reserved */
+};
+
+struct idma_pram {
+    unsigned short  ibase;          /* IDMA BD Base Address */
+    unsigned short  ibptr;          /* IDMA buffer descriptor pointer */
+    unsigned long   istate;         /* IDMA internal state */
+    unsigned long   itemp;          /* IDMA temp */
+};
+
+struct ethernet_pram {
+    /*
+     * SCC parameter RAM
+     */
+    unsigned short  rbase;          /* RX BD base address */
+    unsigned short  tbase;          /* TX BD base address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned long   rcrc;           /* temp receive CRC */
+    unsigned long   tcrc;           /* temp transmit CRC */
+   
+    /*
+     * ETHERNET specific parameter RAM
+     */
+    unsigned long   c_pres;         /* preset CRC */
+    unsigned long   c_mask;         /* constant mask for CRC */
+    unsigned long   crcec;          /* CRC error counter */
+    unsigned long   alec;           /* alighnment error counter */
+    unsigned long   disfc;          /* discard frame counter */
+    unsigned short  pads;           /* short frame PAD characters */
+    unsigned short  ret_lim;        /* retry limit threshold */
+    unsigned short  ret_cnt;        /* retry limit counter */
+    unsigned short  mflr;           /* maximum frame length reg */
+    unsigned short  minflr;         /* minimum frame length reg */
+    unsigned short  maxd1;          /* maximum DMA1 length reg */
+    unsigned short  maxd2;          /* maximum DMA2 length reg */
+    unsigned short  maxd;           /* rx max DMA */
+    unsigned short  dma_cnt;        /* rx dma counter */
+    unsigned short  max_b;          /* max bd byte count */
+    unsigned short  gaddr1;         /* group address filter 1 */
+    unsigned short  gaddr2;         /* group address filter 2 */
+    unsigned short  gaddr3;         /* group address filter 3 */
+    unsigned short  gaddr4;         /* group address filter 4 */
+    unsigned long   tbuf0_data0;    /* save area 0 - current frm */
+    unsigned long   tbuf0_data1;    /* save area 1 - current frm */
+    unsigned long   tbuf0_rba0;
+    unsigned long   tbuf0_crc;
+    unsigned short  tbuf0_bcnt;
+    union {
+        unsigned char b[6];
+        struct {
+            unsigned short high;
+            unsigned short middl;
+            unsigned short low;
+        } w;
+    } paddr;
+    unsigned short  p_per;          /* persistence */
+    unsigned short  rfbd_ptr;       /* rx first bd pointer */
+    unsigned short  tfbd_ptr;       /* tx first bd pointer */
+    unsigned short  tlbd_ptr;       /* tx last bd pointer */
+    unsigned long   tbuf1_data0;    /* save area 0 - next frame */
+    unsigned long   tbuf1_data1;    /* save area 1 - next frame */
+    unsigned long   tbuf1_rba0;
+    unsigned long   tbuf1_crc;
+    unsigned short  tbuf1_bcnt;
+    unsigned short  tx_len;         /* tx frame length counter */
+    unsigned short  iaddr1;         /* individual address filter 1*/
+    unsigned short  iaddr2;         /* individual address filter 2*/
+    unsigned short  iaddr3;         /* individual address filter 3*/
+    unsigned short  iaddr4;         /* individual address filter 4*/
+    unsigned short  boff_cnt;       /* back-off counter */
+    unsigned short  taddr_h;        /* temp address (MSB) */
+    unsigned short  taddr_m;        /* temp address */
+    unsigned short  taddr_l;        /* temp address (LSB) */
+};
+
+struct transparent_pram {
+    /*
+     * SCC parameter RAM
+     */
+    unsigned short  rbase;          /* RX BD base address */
+    unsigned short  tbase;          /* TX BD base address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned long   rcrc;           /* temp receive CRC */
+    unsigned long   tcrc;           /* temp transmit CRC */
+   
+    /*
+     * TRANSPARENT specific parameter RAM
+     */
+    unsigned long   crc_p;          /* CRC Preset */
+    unsigned long   crc_c;          /* CRC constant */
+};
+
+struct timer_pram {
+    /*
+     * RISC timers parameter RAM
+     */
+    unsigned short  tm_base;        /* RISC timer table base adr */
+    unsigned short  tm_ptr;         /* RISC timer table pointer */
+    unsigned short  r_tmr;          /* RISC timer mode register */
+    unsigned short  r_tmv;          /* RISC timer valid register */
+    unsigned long   tm_cmd;         /* RISC timer cmd register */
+    unsigned long   tm_cnt;         /* RISC timer internal cnt */
+};
+
+#endif

include/asm-m68knommu/m68360_quicc.h

@@ -0,0 +1,362 @@
+/***********************************
+ * $Id: m68360_quicc.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Definitions of QUICC memory structures
+ ***************************************
+ */
+
+#ifndef __M68360_QUICC_H
+#define __M68360_QUICC_H
+
+/*
+ * include registers and
+ * parameter ram definitions files
+ */
+#include <asm/m68360_regs.h>
+#include <asm/m68360_pram.h>
+
+
+
+/* Buffer Descriptors */
+typedef struct quicc_bd {
+    volatile unsigned short     status;
+    volatile unsigned short     length;
+    volatile unsigned char      *buf;     /* WARNING: This is only true if *char is 32 bits */
+} QUICC_BD;
+
+
+#ifdef MOTOROLA_ORIGINAL
+struct user_data {
+    /* BASE + 0x000: user data memory */
+    volatile unsigned char      udata_bd_ucode[0x400]; /*user data bd's Ucode*/
+    volatile unsigned char      udata_bd[0x200];       /*user data Ucode     */
+    volatile unsigned char      ucode_ext[0x100];      /*Ucode Extention ram */
+    volatile unsigned char      RESERVED1[0x500];      /* Reserved area      */
+};
+#else
+struct user_data {
+    /* BASE + 0x000: user data memory */
+    volatile unsigned char      udata_bd_ucode[0x400]; /* user data, bds, Ucode*/
+    volatile unsigned char      udata_bd1[0x200];       /* user, bds */
+    volatile unsigned char      ucode_bd_scratch[0x100]; /* user, bds, ucode scratch */
+    volatile unsigned char      udata_bd2[0x100];       /* user, bds */
+    volatile unsigned char      RESERVED1[0x400];      /* Reserved area      */
+};
+#endif
+
+
+/*
+ * internal ram
+ */
+typedef struct quicc {
+	union {
+		struct quicc32_pram ch_pram_tbl[32];	/* 32*64(bytes) per channel */	
+		struct user_data		u;
+	}ch_or_u;	/* multipul or user space */
+
+    /* BASE + 0xc00: PARAMETER RAM */
+	union {
+		struct scc_pram {
+			union {
+				struct hdlc_pram        h;
+				struct uart_pram        u;
+				struct bisync_pram      b;
+				struct transparent_pram t;
+				unsigned char   RESERVED66[0x70];
+			} pscc;               /* scc parameter area (protocol dependent) */
+			union {
+				struct {
+					unsigned char       RESERVED70[0x10];
+					struct spi_pram     spi;
+					unsigned char       RESERVED72[0x8];
+					struct timer_pram   timer;
+				} timer_spi;
+				struct {
+					struct idma_pram idma;
+					unsigned char       RESERVED67[0x4];
+					union {
+						struct smc_uart_pram u;
+						struct smc_trnsp_pram t;
+					} psmc;
+				} idma_smc;
+			} pothers;
+		} scc;
+		struct ethernet_pram    enet_scc;
+		struct global_multi_pram        m;
+		unsigned char   pr[0x100];
+	} pram[4];
+
+    /* reserved */
+
+    /* BASE + 0x1000: INTERNAL REGISTERS */
+    /* SIM */
+    volatile unsigned long      sim_mcr;        /* module configuration reg */
+    volatile unsigned short     sim_simtr;      /* module test register     */
+    volatile unsigned char      RESERVED2[0x2]; /* Reserved area            */
+    volatile unsigned char      sim_avr;        /* auto vector reg          */
+    volatile unsigned char      sim_rsr;        /* reset status reg         */
+    volatile unsigned char      RESERVED3[0x2]; /* Reserved area            */
+    volatile unsigned char      sim_clkocr;     /* CLCO control register    */
+    volatile unsigned char      RESERVED62[0x3];        /* Reserved area    */
+    volatile unsigned short     sim_pllcr;      /* PLL control register     */
+    volatile unsigned char      RESERVED63[0x2];        /* Reserved area    */
+    volatile unsigned short     sim_cdvcr;      /* Clock devider control register */
+    volatile unsigned short     sim_pepar;      /* Port E pin assignment register */
+    volatile unsigned char      RESERVED64[0xa];        /* Reserved area    */
+    volatile unsigned char      sim_sypcr;      /* system protection control*/
+    volatile unsigned char      sim_swiv;       /* software interrupt vector*/
+    volatile unsigned char      RESERVED6[0x2]; /* Reserved area            */
+    volatile unsigned short     sim_picr;       /* periodic interrupt control reg */
+    volatile unsigned char      RESERVED7[0x2]; /* Reserved area            */
+    volatile unsigned short     sim_pitr;       /* periodic interrupt timing reg */
+    volatile unsigned char      RESERVED8[0x3]; /* Reserved area            */
+    volatile unsigned char      sim_swsr;       /* software service         */
+    volatile unsigned long      sim_bkar;       /* breakpoint address register*/
+    volatile unsigned long      sim_bkcr;       /* breakpoint control register*/
+    volatile unsigned char      RESERVED10[0x8];        /* Reserved area    */
+    /* MEMC */
+    volatile unsigned long      memc_gmr;       /* Global memory register   */
+    volatile unsigned short     memc_mstat;     /* MEMC status register     */
+    volatile unsigned char      RESERVED11[0xa];        /* Reserved area    */
+    volatile unsigned long      memc_br0;       /* base register 0          */
+    volatile unsigned long      memc_or0;       /* option register 0        */
+    volatile unsigned char      RESERVED12[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br1;       /* base register 1          */
+    volatile unsigned long      memc_or1;       /* option register 1        */
+    volatile unsigned char      RESERVED13[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br2;       /* base register 2          */
+    volatile unsigned long      memc_or2;       /* option register 2        */
+    volatile unsigned char      RESERVED14[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br3;       /* base register 3          */
+    volatile unsigned long      memc_or3;       /* option register 3        */
+    volatile unsigned char      RESERVED15[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br4;       /* base register 3          */
+    volatile unsigned long      memc_or4;       /* option register 3        */
+    volatile unsigned char      RESERVED16[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br5;       /* base register 3          */
+    volatile unsigned long      memc_or5;       /* option register 3        */
+    volatile unsigned char      RESERVED17[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br6;       /* base register 3          */
+    volatile unsigned long      memc_or6;       /* option register 3        */
+    volatile unsigned char      RESERVED18[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br7;       /* base register 3          */
+    volatile unsigned long      memc_or7;       /* option register 3        */
+    volatile unsigned char      RESERVED9[0x28];        /* Reserved area    */
+    /* TEST */
+    volatile unsigned short     test_tstmra;    /* master shift a           */
+    volatile unsigned short     test_tstmrb;    /* master shift b           */
+    volatile unsigned short     test_tstsc;     /* shift count              */
+    volatile unsigned short     test_tstrc;     /* repetition counter       */
+    volatile unsigned short     test_creg;      /* control                  */
+    volatile unsigned short     test_dreg;      /* destributed register     */
+    volatile unsigned char      RESERVED58[0x404];      /* Reserved area    */
+    /* IDMA1 */
+    volatile unsigned short     idma_iccr;      /* channel configuration reg*/
+    volatile unsigned char      RESERVED19[0x2];        /* Reserved area    */
+    volatile unsigned short     idma1_cmr;      /* dma mode reg             */
+    volatile unsigned char      RESERVED68[0x2];        /* Reserved area    */
+    volatile unsigned long      idma1_sapr;     /* dma source addr ptr      */
+    volatile unsigned long      idma1_dapr;     /* dma destination addr ptr */
+    volatile unsigned long      idma1_bcr;      /* dma byte count reg       */
+    volatile unsigned char      idma1_fcr;      /* function code reg        */
+    volatile unsigned char      RESERVED20;     /* Reserved area            */
+    volatile unsigned char      idma1_cmar;     /* channel mask reg         */
+    volatile unsigned char      RESERVED21;     /* Reserved area            */
+    volatile unsigned char      idma1_csr;      /* channel status reg       */
+    volatile unsigned char      RESERVED22[0x3];        /* Reserved area    */
+    /* SDMA */
+    volatile unsigned char      sdma_sdsr;      /* status reg               */
+    volatile unsigned char      RESERVED23;     /* Reserved area            */
+    volatile unsigned short     sdma_sdcr;      /* configuration reg        */
+    volatile unsigned long      sdma_sdar;      /* address reg              */
+    /* IDMA2 */
+    volatile unsigned char      RESERVED69[0x2];        /* Reserved area    */
+    volatile unsigned short     idma2_cmr;      /* dma mode reg             */
+    volatile unsigned long      idma2_sapr;     /* dma source addr ptr      */
+    volatile unsigned long      idma2_dapr;     /* dma destination addr ptr */
+    volatile unsigned long      idma2_bcr;      /* dma byte count reg       */
+    volatile unsigned char      idma2_fcr;      /* function code reg        */
+    volatile unsigned char      RESERVED24;     /* Reserved area            */
+    volatile unsigned char      idma2_cmar;     /* channel mask reg         */
+    volatile unsigned char      RESERVED25;     /* Reserved area            */
+    volatile unsigned char      idma2_csr;      /* channel status reg       */
+    volatile unsigned char      RESERVED26[0x7];        /* Reserved area    */
+    /* Interrupt Controller */
+    volatile unsigned long      intr_cicr;      /* CP interrupt configuration reg*/
+    volatile unsigned long      intr_cipr;      /* CP interrupt pending reg */
+    volatile unsigned long      intr_cimr;      /* CP interrupt mask reg    */
+    volatile unsigned long      intr_cisr;      /* CP interrupt in service reg*/
+    /* Parallel I/O */
+    volatile unsigned short     pio_padir;      /* port A data direction reg */
+    volatile unsigned short     pio_papar;      /* port A pin assignment reg */
+    volatile unsigned short     pio_paodr;      /* port A open drain reg    */
+    volatile unsigned short     pio_padat;      /* port A data register     */
+    volatile unsigned char      RESERVED28[0x8];        /* Reserved area    */
+    volatile unsigned short     pio_pcdir;      /* port C data direction reg*/
+    volatile unsigned short     pio_pcpar;      /* port C pin assignment reg*/
+    volatile unsigned short     pio_pcso;       /* port C special options   */
+    volatile unsigned short     pio_pcdat;      /* port C data register     */
+    volatile unsigned short     pio_pcint;      /* port C interrupt cntrl reg */
+    volatile unsigned char      RESERVED29[0x16];       /* Reserved area    */
+    /* Timer */
+    volatile unsigned short     timer_tgcr;     /* timer global configuration reg */
+    volatile unsigned char      RESERVED30[0xe];        /* Reserved area    */
+    volatile unsigned short     timer_tmr1;     /* timer 1 mode reg         */
+    volatile unsigned short     timer_tmr2;     /* timer 2 mode reg         */
+    volatile unsigned short     timer_trr1;     /* timer 1 referance reg    */
+    volatile unsigned short     timer_trr2;     /* timer 2 referance reg    */
+    volatile unsigned short     timer_tcr1;     /* timer 1 capture reg      */
+    volatile unsigned short     timer_tcr2;     /* timer 2 capture reg      */
+    volatile unsigned short     timer_tcn1;     /* timer 1 counter reg      */
+    volatile unsigned short     timer_tcn2;     /* timer 2 counter reg      */
+    volatile unsigned short     timer_tmr3;     /* timer 3 mode reg         */
+    volatile unsigned short     timer_tmr4;     /* timer 4 mode reg         */
+    volatile unsigned short     timer_trr3;     /* timer 3 referance reg    */
+    volatile unsigned short     timer_trr4;     /* timer 4 referance reg    */
+    volatile unsigned short     timer_tcr3;     /* timer 3 capture reg      */
+    volatile unsigned short     timer_tcr4;     /* timer 4 capture reg      */
+    volatile unsigned short     timer_tcn3;     /* timer 3 counter reg      */
+    volatile unsigned short     timer_tcn4;     /* timer 4 counter reg      */
+    volatile unsigned short     timer_ter1;     /* timer 1 event reg        */
+    volatile unsigned short     timer_ter2;     /* timer 2 event reg        */
+    volatile unsigned short     timer_ter3;     /* timer 3 event reg        */
+    volatile unsigned short     timer_ter4;     /* timer 4 event reg        */
+    volatile unsigned char      RESERVED34[0x8];        /* Reserved area    */
+    /* CP */
+    volatile unsigned short     cp_cr;          /* command register         */
+    volatile unsigned char      RESERVED35[0x2];        /* Reserved area    */
+    volatile unsigned short     cp_rccr;        /* main configuration reg   */
+    volatile unsigned char      RESERVED37;     /* Reserved area            */
+    volatile unsigned char      cp_rmds;        /* development support status reg */
+    volatile unsigned long      cp_rmdr;        /* development support control reg */
+    volatile unsigned short     cp_rctr1;       /* ram break register 1     */
+    volatile unsigned short     cp_rctr2;       /* ram break register 2     */
+    volatile unsigned short     cp_rctr3;       /* ram break register 3     */
+    volatile unsigned short     cp_rctr4;       /* ram break register 4     */
+    volatile unsigned char      RESERVED59[0x2];        /* Reserved area    */
+    volatile unsigned short     cp_rter;        /* RISC timers event reg    */
+    volatile unsigned char      RESERVED38[0x2];        /* Reserved area    */
+    volatile unsigned short     cp_rtmr;        /* RISC timers mask reg     */
+    volatile unsigned char      RESERVED39[0x14];       /* Reserved area    */
+    /* BRG */
+    union {
+        volatile unsigned long l;
+        struct {
+            volatile unsigned short BRGC_RESERV:14;
+            volatile unsigned short rst:1;
+            volatile unsigned short en:1;
+            volatile unsigned short extc:2;
+            volatile unsigned short atb:1;
+            volatile unsigned short cd:12;
+            volatile unsigned short div16:1;
+        } b;
+    } brgc[4];                                  /* BRG1-BRG4 configuration regs*/
+    /* SCC registers */
+    struct scc_regs {
+        union {
+            struct {
+                /* Low word. */
+                volatile unsigned short GSMR_RESERV2:1;
+                volatile unsigned short edge:2;
+                volatile unsigned short tci:1;
+                volatile unsigned short tsnc:2;
+                volatile unsigned short rinv:1;
+                volatile unsigned short tinv:1;
+                volatile unsigned short tpl:3;
+                volatile unsigned short tpp:2;
+                volatile unsigned short tend:1;
+                volatile unsigned short tdcr:2;
+                volatile unsigned short rdcr:2;
+                volatile unsigned short renc:3;
+                volatile unsigned short tenc:3;
+                volatile unsigned short diag:2;
+                volatile unsigned short enr:1;
+                volatile unsigned short ent:1;
+                volatile unsigned short mode:4;
+                /* High word. */
+                volatile unsigned short GSMR_RESERV1:14;
+                volatile unsigned short pri:1;
+                volatile unsigned short gde:1;
+                volatile unsigned short tcrc:2;
+                volatile unsigned short revd:1;
+                volatile unsigned short trx:1;
+                volatile unsigned short ttx:1;
+                volatile unsigned short cdp:1;
+                volatile unsigned short ctsp:1;
+                volatile unsigned short cds:1;
+                volatile unsigned short ctss:1;
+                volatile unsigned short tfl:1;
+                volatile unsigned short rfw:1;
+                volatile unsigned short txsy:1;
+                volatile unsigned short synl:2;
+                volatile unsigned short rtsm:1;
+                volatile unsigned short rsyn:1;
+            } b;
+            struct {
+                volatile unsigned long low;
+                volatile unsigned long high;
+            } w;
+        } scc_gsmr;                         /* SCC general mode reg         */
+        volatile unsigned short scc_psmr;   /* protocol specific mode reg   */
+        volatile unsigned char  RESERVED42[0x2]; /* Reserved area           */
+        volatile unsigned short scc_todr; /* SCC transmit on demand         */
+        volatile unsigned short scc_dsr;        /* SCC data sync reg        */
+        volatile unsigned short scc_scce;       /* SCC event reg            */
+        volatile unsigned char  RESERVED43[0x2];/* Reserved area            */
+        volatile unsigned short scc_sccm;       /* SCC mask reg             */
+        volatile unsigned char  RESERVED44[0x1];/* Reserved area            */
+        volatile unsigned char  scc_sccs;       /* SCC status reg           */
+        volatile unsigned char  RESERVED45[0x8]; /* Reserved area           */
+    } scc_regs[4];
+    /* SMC */
+    struct smc_regs {
+        volatile unsigned char  RESERVED46[0x2]; /* Reserved area           */
+        volatile unsigned short smc_smcmr;       /* SMC mode reg            */
+        volatile unsigned char  RESERVED60[0x2]; /* Reserved area           */
+        volatile unsigned char  smc_smce;        /* SMC event reg           */
+        volatile unsigned char  RESERVED47[0x3]; /* Reserved area           */
+        volatile unsigned char  smc_smcm;        /* SMC mask reg            */
+        volatile unsigned char  RESERVED48[0x5]; /* Reserved area           */
+    } smc_regs[2];
+    /* SPI */
+    volatile unsigned short     spi_spmode;     /* SPI mode reg             */
+    volatile unsigned char      RESERVED51[0x4];        /* Reserved area    */
+    volatile unsigned char      spi_spie;       /* SPI event reg            */
+    volatile unsigned char      RESERVED52[0x3];        /* Reserved area    */
+    volatile unsigned char      spi_spim;       /* SPI mask reg             */
+    volatile unsigned char      RESERVED53[0x2];        /* Reserved area    */
+    volatile unsigned char      spi_spcom;      /* SPI command reg          */
+    volatile unsigned char      RESERVED54[0x4];        /* Reserved area    */
+    /* PIP */
+    volatile unsigned short     pip_pipc;       /* pip configuration reg    */
+    volatile unsigned char      RESERVED65[0x2];        /* Reserved area    */
+    volatile unsigned short     pip_ptpr;       /* pip timing parameters reg */
+    volatile unsigned long      pip_pbdir;      /* port b data direction reg */
+    volatile unsigned long      pip_pbpar;      /* port b pin assignment reg */
+    volatile unsigned long      pip_pbodr;      /* port b open drain reg    */
+    volatile unsigned long      pip_pbdat;      /* port b data reg          */
+    volatile unsigned char      RESERVED71[0x18];       /* Reserved area    */
+    /* Serial Interface */
+    volatile unsigned long      si_simode;      /* SI mode register         */
+    volatile unsigned char      si_sigmr;       /* SI global mode register  */
+    volatile unsigned char      RESERVED55;     /* Reserved area            */
+    volatile unsigned char      si_sistr;       /* SI status register       */
+    volatile unsigned char      si_sicmr;       /* SI command register      */
+    volatile unsigned char      RESERVED56[0x4]; /* Reserved area           */
+    volatile unsigned long      si_sicr;        /* SI clock routing         */
+    volatile unsigned long      si_sirp;        /* SI ram pointers          */
+    volatile unsigned char      RESERVED57[0xc]; /* Reserved area           */
+    volatile unsigned short     si_siram[0x80]; /* SI routing ram          */
+} QUICC;
+
+#endif
+
+/*
+ * Local variables:
+ *  c-indent-level: 4
+ *  c-basic-offset: 4
+ *  tab-width: 4
+ * End:
+ */

include/asm-m68knommu/m68360_regs.h

@@ -0,0 +1,408 @@
+/***********************************
+ * $Id: m68360_regs.h,v 1.2 2002/10/26 15:03:55 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Definitions of the QUICC registers
+ ***************************************
+ */
+
+#ifndef __REGISTERS_H
+#define __REGISTERS_H
+
+#define CLEAR_BIT(x, bit)  x =bit 
+
+/*****************************************************************
+        Command Register
+*****************************************************************/
+
+/* bit fields within command register */
+#define SOFTWARE_RESET  0x8000
+#define CMD_OPCODE      0x0f00
+#define CMD_CHANNEL     0x00f0
+#define CMD_FLAG        0x0001
+
+/* general command opcodes */
+#define INIT_RXTX_PARAMS        0x0000
+#define INIT_RX_PARAMS          0x0100
+#define INIT_TX_PARAMS          0x0200
+#define ENTER_HUNT_MODE         0x0300
+#define STOP_TX                 0x0400
+#define GR_STOP_TX              0x0500
+#define RESTART_TX              0x0600
+#define CLOSE_RX_BD             0x0700
+#define SET_ENET_GROUP          0x0800
+#define RESET_ENET_GROUP        0x0900
+
+/* quicc32 CP commands */
+#define STOP_TX_32		0x0e00	/*add chan# bits 2-6 */
+#define ENTER_HUNT_MODE_32	0x1e00
+
+/* quicc32 mask/event SCC register */
+#define GOV	0x01
+#define GUN	0x02
+#define GINT	0x04
+#define IQOV	0x08
+
+
+/* Timer commands */
+#define SET_TIMER               0x0800
+
+/* Multi channel Interrupt structure */
+#define INTR_VALID	0x8000	/* Valid interrupt entry */
+#define INTR_WRAP	0x4000	/* Wrap bit in the interrupt entry table */
+#define INTR_CH_NU	0x07c0	/* Channel Num in interrupt table */
+#define INTR_MASK_BITS	0x383f
+
+/*
+ * General SCC mode register (GSMR)
+ */
+
+#define MODE_HDLC               0x0
+#define MODE_APPLE_TALK         0x2
+#define MODE_SS7                0x3
+#define MODE_UART               0x4
+#define MODE_PROFIBUS           0x5
+#define MODE_ASYNC_HDLC         0x6
+#define MODE_V14                0x7
+#define MODE_BISYNC             0x8
+#define MODE_DDCMP              0x9
+#define MODE_MULTI_CHANNEL      0xa
+#define MODE_ETHERNET           0xc
+
+#define DIAG_NORMAL             0x0
+#define DIAG_LOCAL_LPB          0x1
+#define DIAG_AUTO_ECHO          0x2
+#define DIAG_LBP_ECHO           0x3
+
+/* For RENC and TENC fields in GSMR */
+#define ENC_NRZ                 0x0
+#define ENC_NRZI                0x1
+#define ENC_FM0                 0x2
+#define ENC_MANCH               0x4
+#define ENC_DIFF_MANC           0x6
+
+/* For TDCR and RDCR fields in GSMR */
+#define CLOCK_RATE_1            0x0
+#define CLOCK_RATE_8            0x1
+#define CLOCK_RATE_16           0x2
+#define CLOCK_RATE_32           0x3
+
+#define TPP_00                  0x0
+#define TPP_10                  0x1
+#define TPP_01                  0x2
+#define TPP_11                  0x3
+
+#define TPL_NO                  0x0
+#define TPL_8                   0x1
+#define TPL_16                  0x2
+#define TPL_32                  0x3
+#define TPL_48                  0x4
+#define TPL_64                  0x5
+#define TPL_128                 0x6
+
+#define TSNC_INFINITE           0x0
+#define TSNC_14_65              0x1
+#define TSNC_4_15               0x2
+#define TSNC_3_1                0x3
+
+#define EDGE_BOTH               0x0
+#define EDGE_POS                0x1
+#define EDGE_NEG                0x2
+#define EDGE_NO                 0x3
+
+#define SYNL_NO                 0x0
+#define SYNL_4                  0x1
+#define SYNL_8                  0x2
+#define SYNL_16                 0x3
+
+#define TCRC_CCITT16            0x0
+#define TCRC_CRC16              0x1
+#define TCRC_CCITT32            0x2
+
+
+/*****************************************************************
+        TODR (Transmit on demand) Register
+*****************************************************************/
+#define TODR_TOD        0x8000  /* Transmit on demand */
+
+
+/*****************************************************************
+        CICR register settings
+*****************************************************************/
+
+/* note that relative irq priorities of the SCCs can be reordered
+ * if desired - see p. 7-377 of the MC68360UM */
+#define CICR_SCA_SCC1           ((uint)0x00000000)      /* SCC1 @ SCCa */
+#define CICR_SCB_SCC2           ((uint)0x00040000)      /* SCC2 @ SCCb */
+#define CICR_SCC_SCC3           ((uint)0x00200000)      /* SCC3 @ SCCc */
+#define CICR_SCD_SCC4           ((uint)0x00c00000)      /* SCC4 @ SCCd */
+
+#define CICR_IRL_MASK           ((uint)0x0000e000)      /* Core interrrupt */
+#define CICR_HP_MASK            ((uint)0x00001f00)      /* Hi-pri int. */
+#define CICR_VBA_MASK           ((uint)0x000000e0)      /* Vector Base Address */
+#define CICR_SPS                ((uint)0x00000001)      /* SCC Spread */
+
+
+/*****************************************************************
+       Interrupt bits for CIPR and CIMR (MC68360UM p. 7-379)
+*****************************************************************/
+
+#define INTR_PIO_PC0    0x80000000      /* parallel I/O C bit 0 */
+#define INTR_SCC1       0x40000000      /* SCC port 1 */
+#define INTR_SCC2       0x20000000      /* SCC port 2 */
+#define INTR_SCC3       0x10000000      /* SCC port 3 */
+#define INTR_SCC4       0x08000000      /* SCC port 4 */
+#define INTR_PIO_PC1    0x04000000      /* parallel i/o C bit 1 */
+#define INTR_TIMER1     0x02000000      /* timer 1 */
+#define INTR_PIO_PC2    0x01000000      /* parallel i/o C bit 2 */
+#define INTR_PIO_PC3    0x00800000      /* parallel i/o C bit 3 */
+#define INTR_SDMA_BERR  0x00400000      /* SDMA channel bus error */
+#define INTR_DMA1       0x00200000      /* idma 1 */
+#define INTR_DMA2       0x00100000      /* idma 2 */
+#define INTR_TIMER2     0x00040000      /* timer 2 */
+#define INTR_CP_TIMER   0x00020000      /* CP timer */
+#define INTR_PIP_STATUS 0x00010000      /* PIP status */
+#define INTR_PIO_PC4    0x00008000      /* parallel i/o C bit 4 */
+#define INTR_PIO_PC5    0x00004000      /* parallel i/o C bit 5 */
+#define INTR_TIMER3     0x00001000      /* timer 3 */
+#define INTR_PIO_PC6    0x00000800      /* parallel i/o C bit 6 */
+#define INTR_PIO_PC7    0x00000400      /* parallel i/o C bit 7 */
+#define INTR_PIO_PC8    0x00000200      /* parallel i/o C bit 8 */
+#define INTR_TIMER4     0x00000080      /* timer 4 */
+#define INTR_PIO_PC9    0x00000040      /* parallel i/o C bit 9 */
+#define INTR_SCP        0x00000020      /* SCP */
+#define INTR_SMC1       0x00000010      /* SMC 1 */
+#define INTR_SMC2       0x00000008      /* SMC 2 */
+#define INTR_PIO_PC10   0x00000004      /* parallel i/o C bit 10 */
+#define INTR_PIO_PC11   0x00000002      /* parallel i/o C bit 11 */
+#define INTR_ERR        0x00000001      /* error */
+
+
+/*****************************************************************
+        CPM Interrupt vector encodings (MC68360UM p. 7-376)
+*****************************************************************/
+
+#define CPMVEC_NR		32
+#define CPMVEC_PIO_PC0		0x1f
+#define CPMVEC_SCC1		0x1e
+#define CPMVEC_SCC2		0x1d
+#define CPMVEC_SCC3		0x1c
+#define CPMVEC_SCC4		0x1b
+#define CPMVEC_PIO_PC1		0x1a
+#define CPMVEC_TIMER1		0x19
+#define CPMVEC_PIO_PC2		0x18
+#define CPMVEC_PIO_PC3		0x17
+#define CPMVEC_SDMA_CB_ERR	0x16
+#define CPMVEC_IDMA1		0x15
+#define CPMVEC_IDMA2		0x14
+#define CPMVEC_RESERVED3	0x13
+#define CPMVEC_TIMER2		0x12
+#define CPMVEC_RISCTIMER	0x11
+#define CPMVEC_RESERVED2	0x10
+#define CPMVEC_PIO_PC4		0x0f
+#define CPMVEC_PIO_PC5		0x0e
+#define CPMVEC_TIMER3		0x0c
+#define CPMVEC_PIO_PC6		0x0b
+#define CPMVEC_PIO_PC7		0x0a
+#define CPMVEC_PIO_PC8		0x09
+#define CPMVEC_RESERVED1	0x08
+#define CPMVEC_TIMER4		0x07
+#define CPMVEC_PIO_PC9		0x06
+#define CPMVEC_SPI		0x05
+#define CPMVEC_SMC1		0x04
+#define CPMVEC_SMC2		0x03
+#define CPMVEC_PIO_PC10		0x02
+#define CPMVEC_PIO_PC11		0x01
+#define CPMVEC_ERROR		0x00
+
+/* #define CPMVEC_PIO_PC0		((ushort)0x1f) */
+/* #define CPMVEC_SCC1		((ushort)0x1e) */
+/* #define CPMVEC_SCC2		((ushort)0x1d) */
+/* #define CPMVEC_SCC3		((ushort)0x1c) */
+/* #define CPMVEC_SCC4		((ushort)0x1b) */
+/* #define CPMVEC_PIO_PC1		((ushort)0x1a) */
+/* #define CPMVEC_TIMER1		((ushort)0x19) */
+/* #define CPMVEC_PIO_PC2		((ushort)0x18) */
+/* #define CPMVEC_PIO_PC3		((ushort)0x17) */
+/* #define CPMVEC_SDMA_CB_ERR	((ushort)0x16) */
+/* #define CPMVEC_IDMA1		((ushort)0x15) */
+/* #define CPMVEC_IDMA2		((ushort)0x14) */
+/* #define CPMVEC_RESERVED3	((ushort)0x13) */
+/* #define CPMVEC_TIMER2		((ushort)0x12) */
+/* #define CPMVEC_RISCTIMER	((ushort)0x11) */
+/* #define CPMVEC_RESERVED2	((ushort)0x10) */
+/* #define CPMVEC_PIO_PC4		((ushort)0x0f) */
+/* #define CPMVEC_PIO_PC5		((ushort)0x0e) */
+/* #define CPMVEC_TIMER3		((ushort)0x0c) */
+/* #define CPMVEC_PIO_PC6		((ushort)0x0b) */
+/* #define CPMVEC_PIO_PC7		((ushort)0x0a) */
+/* #define CPMVEC_PIO_PC8		((ushort)0x09) */
+/* #define CPMVEC_RESERVED1	((ushort)0x08) */
+/* #define CPMVEC_TIMER4		((ushort)0x07) */
+/* #define CPMVEC_PIO_PC9		((ushort)0x06) */
+/* #define CPMVEC_SPI		((ushort)0x05) */
+/* #define CPMVEC_SMC1		((ushort)0x04) */
+/* #define CPMVEC_SMC2		((ushort)0x03) */
+/* #define CPMVEC_PIO_PC10		((ushort)0x02) */
+/* #define CPMVEC_PIO_PC11		((ushort)0x01) */
+/* #define CPMVEC_ERROR		((ushort)0x00) */
+
+
+/*****************************************************************
+ *        PIO control registers
+ *****************************************************************/
+
+/* Port A - See 360UM p. 7-358
+ * 
+ *  Note that most of these pins have alternate functions
+ */
+
+
+/* The macros are nice, but there are all sorts of references to 1-indexed
+ * facilities on the 68360... */
+/* #define PA_RXD(n)	((ushort)(0x01<<(2*n))) */
+/* #define PA_TXD(n)	((ushort)(0x02<<(2*n))) */
+
+#define PA_RXD1		((ushort)0x0001)
+#define PA_TXD1		((ushort)0x0002)
+#define PA_RXD2		((ushort)0x0004)
+#define PA_TXD2		((ushort)0x0008)
+#define PA_RXD3		((ushort)0x0010)
+#define PA_TXD3		((ushort)0x0020)
+#define PA_RXD4		((ushort)0x0040)
+#define PA_TXD4		((ushort)0x0080)
+
+#define PA_CLK1		((ushort)0x0100)
+#define PA_CLK2		((ushort)0x0200)
+#define PA_CLK3		((ushort)0x0400)
+#define PA_CLK4		((ushort)0x0800)
+#define PA_CLK5		((ushort)0x1000)
+#define PA_CLK6		((ushort)0x2000)
+#define PA_CLK7		((ushort)0x4000)
+#define PA_CLK8		((ushort)0x8000)
+
+
+/* Port B - See 360UM p. 7-362
+ */
+
+
+/* Port C - See 360UM p. 7-365
+ */
+
+#define PC_RTS1		((ushort)0x0001)
+#define PC_RTS2		((ushort)0x0002)
+#define PC__RTS3	((ushort)0x0004) /* !RTS3 */
+#define PC__RTS4	((ushort)0x0008) /* !RTS4 */
+
+#define PC_CTS1		((ushort)0x0010)
+#define PC_CD1		((ushort)0x0020)
+#define PC_CTS2		((ushort)0x0040)
+#define PC_CD2		((ushort)0x0080)
+#define PC_CTS3		((ushort)0x0100)
+#define PC_CD3		((ushort)0x0200)
+#define PC_CTS4		((ushort)0x0400)
+#define PC_CD4		((ushort)0x0800)
+
+
+
+/*****************************************************************
+        chip select option register
+*****************************************************************/
+#define DTACK           0xe000
+#define ADR_MASK        0x1ffc
+#define RDWR_MASK       0x0002
+#define FC_MASK         0x0001
+
+/*****************************************************************
+        tbase and rbase registers
+*****************************************************************/
+#define TBD_ADDR(quicc,pram) ((struct quicc_bd *) \
+    (quicc->ch_or_u.u.udata_bd_ucode + pram->tbase))
+#define RBD_ADDR(quicc,pram) ((struct quicc_bd *) \
+    (quicc->ch_or_u.u.udata_bd_ucode + pram->rbase))
+#define TBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \
+    (quicc->ch_or_u.u.udata_bd_ucode + pram->tbptr))
+#define RBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \
+    (quicc->ch_or_u.u.udata_bd_ucode + pram->rbptr))
+#define TBD_SET_CUR_ADDR(bd,quicc,pram) pram->tbptr = \
+    ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode)))
+#define RBD_SET_CUR_ADDR(bd,quicc,pram) pram->rbptr = \
+    ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode)))
+#define INCREASE_TBD(bd,quicc,pram) {  \
+    if((bd)->status & T_W)             \
+        (bd) = TBD_ADDR(quicc,pram);   \
+    else                               \
+        (bd)++;                        \
+}
+#define DECREASE_TBD(bd,quicc,pram) {  \
+    if ((bd) == TBD_ADDR(quicc, pram)) \
+        while (!((bd)->status & T_W))  \
+            (bd)++;                    \
+    else                               \
+        (bd)--;                        \
+}
+#define INCREASE_RBD(bd,quicc,pram) {  \
+    if((bd)->status & R_W)             \
+        (bd) = RBD_ADDR(quicc,pram);   \
+    else                               \
+        (bd)++;                        \
+}
+#define DECREASE_RBD(bd,quicc,pram) {  \
+    if ((bd) == RBD_ADDR(quicc, pram)) \
+        while (!((bd)->status & T_W))  \
+            (bd)++;                    \
+    else                               \
+        (bd)--;                        \
+}
+
+/*****************************************************************
+        Macros for Multi channel
+*****************************************************************/
+#define QMC_BASE(quicc,page) (struct global_multi_pram *)(&quicc->pram[page])
+#define MCBASE(quicc,page) (unsigned long)(quicc->pram[page].m.mcbase)
+#define CHANNEL_PRAM_BASE(quicc,channel) ((struct quicc32_pram *) \
+		(&(quicc->ch_or_u.ch_pram_tbl[channel])))
+#define TBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \
+    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbase)))
+#define RBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \
+    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbase)))
+#define TBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \
+    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbptr)))
+#define RBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \
+    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbptr)))
+#define TBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \
+     CHANNEL_PRAM_BASE(quicc,channel)->tbptr = \
+    ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page))))
+#define RBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \
+     CHANNEL_PRAM_BASE(quicc,channel)->rbptr = \
+    ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page))))
+
+#define INCREASE_TBD_32(bd,quicc,page,channel) {  \
+    if((bd)->status & T_W)                        \
+        (bd) = TBD_32_ADDR(quicc,page,channel);   \
+    else                                          \
+        (bd)++;                                   \
+}
+#define DECREASE_TBD_32(bd,quicc,page,channel) {  \
+    if ((bd) == TBD_32_ADDR(quicc, page,channel)) \
+        while (!((bd)->status & T_W))             \
+            (bd)++;                               \
+    else                                          \
+        (bd)--;                                   \
+}
+#define INCREASE_RBD_32(bd,quicc,page,channel) {  \
+    if((bd)->status & R_W)                        \
+        (bd) = RBD_32_ADDR(quicc,page,channel);   \
+    else                                          \
+        (bd)++;                                   \
+}
+#define DECREASE_RBD_32(bd,quicc,page,channel) {  \
+    if ((bd) == RBD_32_ADDR(quicc, page,channel)) \
+        while (!((bd)->status & T_W))             \
+            (bd)++;                               \
+    else                                          \
+        (bd)--;                                   \
+}
+
+#endif

include/asm-m68knommu/machdep.h

@@ -0,0 +1,54 @@
+#ifndef _M68KNOMMU_MACHDEP_H
+#define _M68KNOMMU_MACHDEP_H
+
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+
+struct pt_regs;
+struct kbd_repeat;
+struct mktime;
+struct hwclk_time;
+struct gendisk;
+struct buffer_head;
+
+extern void (*mach_sched_init) (irqreturn_t (*handler)(int, void *, struct pt_regs *));
+/* machine dependent keyboard functions */
+extern int (*mach_keyb_init) (void);
+extern int (*mach_kbdrate) (struct kbd_repeat *);
+extern void (*mach_kbd_leds) (unsigned int);
+/* machine dependent irq functions */
+extern void (*mach_init_IRQ) (void);
+extern irqreturn_t (*(*mach_default_handler)[]) (int, void *, struct pt_regs *);
+extern int (*mach_request_irq) (unsigned int irq, void (*handler)(int, void *, struct pt_regs *),
+                                unsigned long flags, const char *devname, void *dev_id);
+extern void (*mach_free_irq) (unsigned int irq, void *dev_id);
+extern void (*mach_get_model) (char *model);
+extern int (*mach_get_hardware_list) (char *buffer);
+extern int (*mach_get_irq_list) (struct seq_file *p, void *v);
+extern void (*mach_process_int) (int irq, struct pt_regs *fp);
+/* machine dependent timer functions */
+extern unsigned long (*mach_gettimeoffset)(void);
+extern void (*mach_gettod)(int *year, int *mon, int *day, int *hour,
+			   int *min, int *sec);
+extern int (*mach_hwclk)(int, struct hwclk_time*);
+extern int (*mach_set_clock_mmss)(unsigned long);
+extern void (*mach_reset)( void );
+extern void (*mach_halt)( void );
+extern void (*mach_power_off)( void );
+extern unsigned long (*mach_hd_init) (unsigned long, unsigned long);
+extern void (*mach_hd_setup)(char *, int *);
+extern long mach_max_dma_address;
+extern void (*mach_floppy_setup)(char *, int *);
+extern void (*mach_floppy_eject)(void);
+extern void (*mach_heartbeat) (int);
+extern void (*mach_l2_flush) (int);
+extern int mach_sysrq_key;
+extern int mach_sysrq_shift_state;
+extern int mach_sysrq_shift_mask;
+extern char *mach_sysrq_xlate;
+
+extern void config_BSP(char *command, int len);
+extern void (*mach_tick)(void);
+extern void (*mach_trap_init)(void);
+
+#endif /* _M68KNOMMU_MACHDEP_H */

include/asm-m68knommu/math-emu.h

@@ -0,0 +1 @@
+#include <asm-m68k/math-emu.h>

include/asm-m68knommu/mc146818rtc.h

@@ -0,0 +1,9 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _M68KNOMMU_MC146818RTC_H
+#define _M68KNOMMU_MC146818RTC_H
+
+/* empty include file to satisfy the include in genrtc.c/ide-geometry.c */
+
+#endif /* _M68KNOMMU_MC146818RTC_H */

include/asm-m68knommu/mcfcache.h

@@ -0,0 +1,125 @@
+/****************************************************************************/
+
+/*
+ *	mcfcache.h -- ColdFire CPU cache support code
+ *
+ *	(C) Copyright 2004, Greg Ungerer <gerg@snapgear.com>
+ */
+
+/****************************************************************************/
+#ifndef	__M68KNOMMU_MCFCACHE_H
+#define	__M68KNOMMU_MCFCACHE_H
+/****************************************************************************/
+
+#include <linux/config.h>
+
+/*
+ *	The different ColdFire families have different cache arrangments.
+ *	Everything from a small instruction only cache, to configurable
+ *	data and/or instruction cache, to unified instruction/data, to 
+ *	harvard style separate instruction and data caches.
+ */
+
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272)
+/*
+ *	Simple version 2 core cache. These have instruction cache only,
+ *	we just need to invalidate it and enable it.
+ */
+.macro CACHE_ENABLE
+	movel	#0x01000000,%d0		/* invalidate cache cmd */
+	movec	%d0,%CACR		/* do invalidate cache */
+	movel	#0x80000100,%d0		/* setup cache mask */
+	movec	%d0,%CACR		/* enable cache */
+.endm
+#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */
+
+#if defined(CONFIG_M527x)
+/*
+ *	New version 2 cores have a configurable split cache arrangement.
+ *	For now I am just enabling instruction cache - but ultimately I
+ *	think a split instruction/data cache would be better.
+ */
+.macro CACHE_ENABLE
+	movel	#0x01400000,%d0
+	movec	%d0,%CACR		/* invalidate cache */
+	nop
+	movel	#0x0000c000,%d0		/* set SDRAM cached only */
+	movec	%d0,%ACR0
+	movel	#0x00000000,%d0		/* no other regions cached */
+	movec	%d0,%ACR1
+	movel	#0x80400100,%d0		/* configure cache */
+	movec	%d0,%CACR		/* enable cache */
+	nop
+.endm
+#endif /* CONFIG_M527x */
+
+#if defined(CONFIG_M528x)
+/*
+ *	Cache is totally broken on early 5282 silicon. So far now we
+ *	disable its cache all together.
+ */
+.macro CACHE_ENABLE
+	movel	#0x01000000,%d0
+	movec	%d0,%CACR		/* invalidate cache */
+	nop
+	movel	#0x0000c000,%d0		/* set SDRAM cached only */
+	movec	%d0,%ACR0
+	movel	#0x00000000,%d0		/* no other regions cached */
+	movec	%d0,%ACR1
+	movel	#0x00000000,%d0		/* configure cache */
+	movec	%d0,%CACR		/* enable cache */
+	nop
+.endm
+#endif /* CONFIG_M528x */
+
+#if defined(CONFIG_M5249) || defined(CONFIG_M5307)
+/*
+ *	The version 3 core cache. Oddly enough the version 2 core 5249
+ *	has the same SDRAM and cache setup as the version 3 cores.
+ *	This is a single unified instruction/data cache.
+ */
+.macro CACHE_ENABLE
+	movel	#0x01000000,%d0		/* invalidate whole cache */
+	movec	%d0,%CACR
+	nop
+#if defined(DEBUGGER_COMPATIBLE_CACHE) || defined(CONFIG_SECUREEDGEMP3)
+	movel	#0x0000c000,%d0		/* set SDRAM cached (write-thru) */
+#else
+	movel	#0x0000c020,%d0		/* set SDRAM cached (copyback) */
+#endif
+	movec	%d0,%ACR0
+	movel	#0x00000000,%d0		/* no other regions cached */
+	movec	%d0,%ACR1
+	movel	#0xa0000200,%d0		/* enable cache */
+	movec	%d0,%CACR
+	nop
+.endm
+#endif /* CONFIG_M5249 || CONFIG_M5307 */
+
+#if defined(CONFIG_M5407)
+/*
+ *	Version 4 cores have a true harvard style separate instruction
+ *	and data cache. Invalidate and enable cache, also enable write
+ *	buffers and branch accelerator.
+ */
+.macro CACHE_ENABLE
+	movel	#0x01040100,%d0		/* invalidate whole cache */
+	movec	%d0,%CACR
+	nop
+	movel	#0x000fc000,%d0		/* set SDRAM cached only */
+	movec	%d0, %ACR0
+	movel	#0x00000000,%d0		/* no other regions cached */
+	movec	%d0, %ACR1
+	movel	#0x000fc000,%d0		/* set SDRAM cached only */
+	movec	%d0, %ACR2
+	movel	#0x00000000,%d0		/* no other regions cached */
+	movec	%d0, %ACR3
+	movel	#0xb6088400,%d0		/* enable caches */
+	movec	%d0,%CACR
+	nop
+.endm
+#endif /* CONFIG_M5407 */
+
+
+/****************************************************************************/
+#endif	/* __M68KNOMMU_MCFCACHE_H */

include/asm-m68knommu/mcfdma.h

@@ -0,0 +1,145 @@
+/****************************************************************************/
+
+/*
+ *	mcfdma.h -- Coldfire internal DMA support defines.
+ *
+ *	(C) Copyright 1999, Rob Scott (rscott@mtrob.ml.org)
+ */
+
+/****************************************************************************/
+#ifndef	mcfdma_h
+#define	mcfdma_h
+/****************************************************************************/
+
+#include <linux/config.h>
+
+/*
+ *	Get address specific defines for this Coldfire member.
+ */
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#define	MCFDMA_BASE0		0x200		/* Base address of DMA 0 */
+#define	MCFDMA_BASE1		0x240		/* Base address of DMA 1 */
+#elif defined(CONFIG_M5272)
+#define	MCFDMA_BASE0		0x0e0		/* Base address of DMA 0 */
+#elif defined(CONFIG_M527x) || defined(CONFIG_M528x)
+/* These are relative to the IPSBAR, not MBAR */
+#define	MCFDMA_BASE0		0x100		/* Base address of DMA 0 */
+#define	MCFDMA_BASE1		0x140		/* Base address of DMA 1 */
+#define	MCFDMA_BASE2		0x180		/* Base address of DMA 2 */
+#define	MCFDMA_BASE3		0x1C0		/* Base address of DMA 3 */
+#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#define	MCFDMA_BASE0		0x300		/* Base address of DMA 0 */
+#define	MCFDMA_BASE1		0x340		/* Base address of DMA 1 */
+#define	MCFDMA_BASE2		0x380		/* Base address of DMA 2 */
+#define	MCFDMA_BASE3		0x3C0		/* Base address of DMA 3 */
+#endif
+
+
+#if !defined(CONFIG_M5272)
+
+/*
+ *	Define the DMA register set addresses.
+ *      Note: these are longword registers, use unsigned long as data type
+ */
+#define	MCFDMA_SAR		0x00		/* DMA source address (r/w) */
+#define	MCFDMA_DAR		0x01		/* DMA destination adr (r/w) */
+/* these are word registers, use unsigned short data type */
+#define	MCFDMA_DCR		0x04		/* DMA control reg (r/w) */
+#define	MCFDMA_BCR		0x06		/* DMA byte count reg (r/w) */
+/* these are byte registers, use unsiged char data type */
+#define	MCFDMA_DSR		0x10		/* DMA status reg (r/w) */
+#define	MCFDMA_DIVR		0x14		/* DMA interrupt vec (r/w) */
+
+/*
+ *	Bit definitions for the DMA Control Register (DCR).
+ */
+#define	MCFDMA_DCR_INT	        0x8000		/* Enable completion irq */
+#define	MCFDMA_DCR_EEXT	        0x4000		/* Enable external DMA req */
+#define	MCFDMA_DCR_CS 	        0x2000		/* Enable cycle steal */
+#define	MCFDMA_DCR_AA   	0x1000		/* Enable auto alignment */
+#define	MCFDMA_DCR_BWC_MASK  	0x0E00		/* Bandwidth ctl mask */
+#define MCFDMA_DCR_BWC_512      0x0200          /* Bandwidth:   512 Bytes */
+#define MCFDMA_DCR_BWC_1024     0x0400          /* Bandwidth:  1024 Bytes */
+#define MCFDMA_DCR_BWC_2048     0x0600          /* Bandwidth:  2048 Bytes */
+#define MCFDMA_DCR_BWC_4096     0x0800          /* Bandwidth:  4096 Bytes */
+#define MCFDMA_DCR_BWC_8192     0x0a00          /* Bandwidth:  8192 Bytes */
+#define MCFDMA_DCR_BWC_16384    0x0c00          /* Bandwidth: 16384 Bytes */
+#define MCFDMA_DCR_BWC_32768    0x0e00          /* Bandwidth: 32768 Bytes */
+#define	MCFDMA_DCR_SAA         	0x0100		/* Single Address Access */
+#define	MCFDMA_DCR_S_RW        	0x0080		/* SAA read/write value */
+#define	MCFDMA_DCR_SINC        	0x0040		/* Source addr inc enable */
+#define	MCFDMA_DCR_SSIZE_MASK  	0x0030		/* Src xfer size */
+#define	MCFDMA_DCR_SSIZE_LONG  	0x0000		/* Src xfer size, 00 = longw */
+#define	MCFDMA_DCR_SSIZE_BYTE  	0x0010		/* Src xfer size, 01 = byte */
+#define	MCFDMA_DCR_SSIZE_WORD  	0x0020		/* Src xfer size, 10 = word */
+#define	MCFDMA_DCR_SSIZE_LINE  	0x0030		/* Src xfer size, 11 = line */
+#define	MCFDMA_DCR_DINC        	0x0008		/* Dest addr inc enable */
+#define	MCFDMA_DCR_DSIZE_MASK  	0x0006		/* Dest xfer size */
+#define	MCFDMA_DCR_DSIZE_LONG  	0x0000		/* Dest xfer size, 00 = long */
+#define	MCFDMA_DCR_DSIZE_BYTE  	0x0002		/* Dest xfer size, 01 = byte */
+#define	MCFDMA_DCR_DSIZE_WORD  	0x0004		/* Dest xfer size, 10 = word */
+#define	MCFDMA_DCR_DSIZE_LINE  	0x0006		/* Dest xfer size, 11 = line */
+#define	MCFDMA_DCR_START       	0x0001		/* Start transfer */
+
+/*
+ *	Bit definitions for the DMA Status Register (DSR).
+ */
+#define	MCFDMA_DSR_CE	        0x40		/* Config error */
+#define	MCFDMA_DSR_BES	        0x20		/* Bus Error on source */
+#define	MCFDMA_DSR_BED 	        0x10		/* Bus Error on dest */
+#define	MCFDMA_DSR_REQ   	0x04		/* Requests remaining */
+#define	MCFDMA_DSR_BSY  	0x02		/* Busy */
+#define	MCFDMA_DSR_DONE        	0x01		/* DMA transfer complete */
+
+#else /* This is an MCF5272 */
+
+#define MCFDMA_DMR        0x00    /* Mode Register (r/w) */
+#define MCFDMA_DIR        0x03    /* Interrupt trigger register (r/w) */
+#define MCFDMA_DSAR       0x03    /* Source Address register (r/w) */
+#define MCFDMA_DDAR       0x04    /* Destination Address register (r/w) */
+#define MCFDMA_DBCR       0x02    /* Byte Count Register (r/w) */
+
+/* Bit definitions for the DMA Mode Register (DMR) */
+#define MCFDMA_DMR_RESET     0x80000000L /* Reset bit */
+#define MCFDMA_DMR_EN        0x40000000L /* DMA enable */
+#define MCFDMA_DMR_RQM       0x000C0000L /* Request Mode Mask */
+#define MCFDMA_DMR_RQM_DUAL  0x000C0000L /* Dual address mode, the only valid mode */
+#define MCFDMA_DMR_DSTM      0x00002000L /* Destination addressing mask */
+#define MCFDMA_DMR_DSTM_SA   0x00000000L /* Destination uses static addressing */
+#define MCFDMA_DMR_DSTM_IA   0x00002000L /* Destination uses incremental addressing */
+#define MCFDMA_DMR_DSTT_UD   0x00000400L /* Destination is user data */
+#define MCFDMA_DMR_DSTT_UC   0x00000800L /* Destination is user code */
+#define MCFDMA_DMR_DSTT_SD   0x00001400L /* Destination is supervisor data */
+#define MCFDMA_DMR_DSTT_SC   0x00001800L /* Destination is supervisor code */
+#define MCFDMA_DMR_DSTS_OFF  0x8         /* offset to the destination size bits */
+#define MCFDMA_DMR_DSTS_LONG 0x00000000L /* Long destination size */
+#define MCFDMA_DMR_DSTS_BYTE 0x00000100L /* Byte destination size */
+#define MCFDMA_DMR_DSTS_WORD 0x00000200L /* Word destination size */
+#define MCFDMA_DMR_DSTS_LINE 0x00000300L /* Line destination size */
+#define MCFDMA_DMR_SRCM      0x00000020L /* Source addressing mask */
+#define MCFDMA_DMR_SRCM_SA   0x00000000L /* Source uses static addressing */
+#define MCFDMA_DMR_SRCM_IA   0x00000020L /* Source uses incremental addressing */
+#define MCFDMA_DMR_SRCT_UD   0x00000004L /* Source is user data */
+#define MCFDMA_DMR_SRCT_UC   0x00000008L /* Source is user code */
+#define MCFDMA_DMR_SRCT_SD   0x00000014L /* Source is supervisor data */
+#define MCFDMA_DMR_SRCT_SC   0x00000018L /* Source is supervisor code */
+#define MCFDMA_DMR_SRCS_OFF  0x0         /* Offset to the source size bits */
+#define MCFDMA_DMR_SRCS_LONG 0x00000000L /* Long source size */
+#define MCFDMA_DMR_SRCS_BYTE 0x00000001L /* Byte source size */
+#define MCFDMA_DMR_SRCS_WORD 0x00000002L /* Word source size */
+#define MCFDMA_DMR_SRCS_LINE 0x00000003L /* Line source size */
+
+/* Bit definitions for the DMA interrupt register (DIR) */
+#define MCFDMA_DIR_INVEN     0x1000 /* Invalid Combination interrupt enable */
+#define MCFDMA_DIR_ASCEN     0x0800 /* Address Sequence Complete (Completion) interrupt enable */
+#define MCFDMA_DIR_TEEN      0x0200 /* Transfer Error interrupt enable */
+#define MCFDMA_DIR_TCEN      0x0100 /* Transfer Complete (a bus transfer, that is) interrupt enable */
+#define MCFDMA_DIR_INV       0x1000 /* Invalid Combination */
+#define MCFDMA_DIR_ASC       0x0008 /* Address Sequence Complete (DMA Completion) */
+#define MCFDMA_DIR_TE        0x0002 /* Transfer Error */
+#define MCFDMA_DIR_TC        0x0001 /* Transfer Complete */
+
+#endif /* !defined(CONFIG_M5272) */ 
+
+/****************************************************************************/
+#endif	/* mcfdma_h */

include/asm-m68knommu/mcfmbus.h

@@ -0,0 +1,78 @@
+/****************************************************************************/
+
+/*
+ *      mcfmbus.h -- Coldfire MBUS support defines.
+ *
+ *      (C) Copyright 1999, Martin Floeer (mfloeer@axcent.de) 
+ */
+
+/****************************************************************************/
+
+
+#ifndef mcfmbus_h
+#define mcfmbus_h
+#include <linux/config.h>
+
+
+#define MCFMBUS_BASE		0x280
+#define MCFMBUS_IRQ_VECTOR	0x19
+#define MCFMBUS_IRQ		0x1
+#define MCFMBUS_CLK		0x3f
+#define MCFMBUS_IRQ_LEVEL	0x07	/*IRQ Level 1*/
+#define MCFMBUS_ADDRESS		0x01
+
+
+/*
+*	Define the 5307 MBUS register set addresses
+*/
+
+#define MCFMBUS_MADR	0x00
+#define MCFMBUS_MFDR	0x04
+#define MCFMBUS_MBCR	0x08
+#define MCFMBUS_MBSR	0x0C
+#define MCFMBUS_MBDR	0x10
+
+
+#define MCFMBUS_MADR_ADDR(a)	(((a)&0x7F)<<0x01) /*Slave Address*/
+
+#define MCFMBUS_MFDR_MBC(a)	((a)&0x3F)	   /*M-Bus Clock*/
+
+/*
+*	Define bit flags in Controll Register
+*/
+
+#define MCFMBUS_MBCR_MEN           (0x80)  /* M-Bus Enable                 */
+#define MCFMBUS_MBCR_MIEN          (0x40)  /* M-Bus Interrupt Enable       */
+#define MCFMBUS_MBCR_MSTA          (0x20)  /* Master/Slave Mode Select Bit */
+#define MCFMBUS_MBCR_MTX           (0x10)  /* Transmit/Rcv Mode Select Bit */
+#define MCFMBUS_MBCR_TXAK          (0x08)  /* Transmit Acknowledge Enable  */
+#define MCFMBUS_MBCR_RSTA          (0x04)  /* Repeat Start                 */
+
+/*
+*	Define bit flags in Status Register
+*/
+
+#define MCFMBUS_MBSR_MCF           (0x80)  /* Data Transfer Complete       */
+#define MCFMBUS_MBSR_MAAS          (0x40)  /* Addressed as a Slave         */
+#define MCFMBUS_MBSR_MBB           (0x20)  /* Bus Busy                     */
+#define MCFMBUS_MBSR_MAL           (0x10)  /* Arbitration Lost             */
+#define MCFMBUS_MBSR_SRW           (0x04)  /* Slave Transmit               */
+#define MCFMBUS_MBSR_MIF           (0x02)  /* M-Bus Interrupt              */
+#define MCFMBUS_MBSR_RXAK          (0x01)  /* No Acknowledge Received      */
+
+/*
+*	Define bit flags in DATA I/O Register
+*/
+
+#define MCFMBUS_MBDR_READ          (0x01)  /* 1=read 0=write MBUS */
+
+#define MBUSIOCSCLOCK		1
+#define MBUSIOCGCLOCK		2
+#define MBUSIOCSADDR			3
+#define MBUSIOCGADDR			4
+#define MBUSIOCSSLADDR			5
+#define MBUSIOCGSLADDR			6
+#define MBUSIOCSSUBADDR			7
+#define MBUSIOCGSUBADDR			8
+
+#endif

include/asm-m68knommu/mcfne.h

@@ -0,0 +1,353 @@
+/****************************************************************************/
+
+/*
+ *	mcfne.h -- NE2000 in ColdFire eval boards.
+ *
+ *	(C) Copyright 1999-2000, Greg Ungerer (gerg@snapgear.com)
+ *	(C) Copyright 2000,      Lineo (www.lineo.com)
+ *	(C) Copyright 2001,      SnapGear (www.snapgear.com)
+ *
+ *      19990409 David W. Miller  Converted from m5206ne.h for 5307 eval board
+ *
+ *      Hacked support for m5206e Cadre III evaluation board
+ *      Fred Stevens (fred.stevens@pemstar.com) 13 April 1999
+ */
+
+/****************************************************************************/
+#ifndef	mcfne_h
+#define	mcfne_h
+/****************************************************************************/
+
+#include <linux/config.h>
+
+/*
+ *	Support for NE2000 clones devices in ColdFire based boards.
+ *	Not all boards address these parts the same way, some use a
+ *	direct addressing method, others use a side-band address space
+ *	to access odd address registers, some require byte swapping
+ *	others do not.
+ */
+#define	BSWAP(w)	(((w) << 8) | ((w) >> 8))
+#define	RSWAP(w)	(w)
+
+
+/*
+ *	Define the basic hardware resources of NE2000 boards.
+ */
+
+#if defined(CONFIG_M5206) && defined(CONFIG_ARNEWSH)
+#define NE2000_ADDR		0x40000300
+#define NE2000_ODDOFFSET	0x00010000
+#define	NE2000_IRQ_VECTOR	0xf0
+#define	NE2000_IRQ_PRIORITY	2
+#define	NE2000_IRQ_LEVEL	4
+#define	NE2000_BYTE		volatile unsigned short
+#endif
+
+#if defined(CONFIG_M5206e) && defined(CONFIG_MOTOROLA)
+#define	NE2000_ADDR		0x40000300
+#define	NE2000_ODDOFFSET	0x00010000
+#define	NE2000_IRQ_VECTOR	0x1c
+#define	NE2000_IRQ_PRIORITY	2
+#define	NE2000_IRQ_LEVEL	4
+#define	NE2000_BYTE		volatile unsigned short
+#endif
+
+#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
+#define NE2000_ADDR		0x30000300
+#define NE2000_IRQ_VECTOR	25
+#define NE2000_IRQ_PRIORITY	1
+#define NE2000_IRQ_LEVEL	3
+#define	NE2000_BYTE		volatile unsigned char
+#endif
+
+#if defined(CONFIG_M5206e) && defined(CONFIG_CFV240)
+#define NE2000_ADDR             0x40010000
+#define NE2000_ADDR1            0x40010001
+#define NE2000_ODDOFFSET        0x00000000
+#define NE2000_IRQ              1
+#define NE2000_IRQ_VECTOR       0x19
+#define NE2000_IRQ_PRIORITY     2
+#define NE2000_IRQ_LEVEL        1
+#define	NE2000_BYTE		volatile unsigned char
+#endif
+
+#if defined(CONFIG_M5307) && defined(CONFIG_MOTOROLA)
+#define NE2000_ADDR		0x40000300
+#define NE2000_ODDOFFSET	0x00010000
+#define NE2000_IRQ_VECTOR	0x1b
+#define	NE2000_BYTE		volatile unsigned short
+#endif
+
+#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
+#define NE2000_ADDR		0x30600300
+#define NE2000_ODDOFFSET	0x00008000
+#define NE2000_IRQ_VECTOR	67
+#undef	BSWAP
+#define	BSWAP(w)		(w)
+#define	NE2000_BYTE		volatile unsigned short
+#undef	RSWAP
+#define	RSWAP(w)		(((w) << 8) | ((w) >> 8))
+#endif
+
+#if defined(CONFIG_M5307) && defined(CONFIG_NETtel)
+#define NE2000_ADDR0		0x30600300
+#define NE2000_ADDR1		0x30800300
+#define NE2000_ODDOFFSET	0x00008000
+#define NE2000_IRQ_VECTOR0	27
+#define NE2000_IRQ_VECTOR1	29
+#undef	BSWAP
+#define	BSWAP(w)		(w)
+#define	NE2000_BYTE		volatile unsigned short
+#undef	RSWAP
+#define	RSWAP(w)		(((w) << 8) | ((w) >> 8))
+#endif
+
+#if defined(CONFIG_M5307) && defined(CONFIG_SECUREEDGEMP3)
+#define NE2000_ADDR		0x30600300
+#define NE2000_ODDOFFSET	0x00008000
+#define NE2000_IRQ_VECTOR	27
+#undef	BSWAP
+#define	BSWAP(w)		(w)
+#define	NE2000_BYTE		volatile unsigned short
+#undef	RSWAP
+#define	RSWAP(w)		(((w) << 8) | ((w) >> 8))
+#endif
+
+#if defined(CONFIG_M5307) && defined(CONFIG_ARNEWSH)
+#define NE2000_ADDR		0xfe600300
+#define NE2000_ODDOFFSET	0x00010000
+#define NE2000_IRQ_VECTOR	0x1b
+#define NE2000_IRQ_PRIORITY	2
+#define NE2000_IRQ_LEVEL	3
+#define	NE2000_BYTE		volatile unsigned short
+#endif
+
+#if defined(CONFIG_M5407)
+#define NE2000_ADDR		0x40000300
+#define NE2000_ODDOFFSET	0x00010000
+#define NE2000_IRQ_VECTOR	0x1b
+#define	NE2000_BYTE		volatile unsigned short
+#endif
+
+/****************************************************************************/
+
+/*
+ *	Side-band address space for odd address requires re-mapping
+ *	many of the standard ISA access functions.
+ */
+#ifdef NE2000_ODDOFFSET
+
+#undef outb
+#undef outb_p
+#undef inb
+#undef inb_p
+#undef outsb
+#undef outsw
+#undef insb
+#undef insw
+
+#define	outb	ne2000_outb
+#define	inb	ne2000_inb
+#define	outb_p	ne2000_outb
+#define	inb_p	ne2000_inb
+#define	outsb	ne2000_outsb
+#define	outsw	ne2000_outsw
+#define	insb	ne2000_insb
+#define	insw	ne2000_insw
+
+
+#ifndef COLDFIRE_NE2000_FUNCS
+
+void ne2000_outb(unsigned int val, unsigned int addr);
+int  ne2000_inb(unsigned int addr);
+void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len);
+void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len);
+void ne2000_outsb(unsigned int addr, void *vbuf, unsigned long len);
+void ne2000_outsw(unsigned int addr, void *vbuf, unsigned long len);
+
+#else
+
+/*
+ *	This macro converts a conventional register address into the
+ *	real memory pointer of the mapped NE2000 device.
+ *	On most NE2000 implementations on ColdFire boards the chip is
+ *	mapped in kinda funny, due to its ISA heritage.
+ */
+#ifdef CONFIG_CFV240
+#define NE2000_PTR(addr)	(NE2000_ADDR + ((addr & 0x3f) << 1) + 1)
+#define NE2000_DATA_PTR(addr)	(NE2000_ADDR + ((addr & 0x3f) << 1))
+#else
+#define	NE2000_PTR(addr)	((addr&0x1)?(NE2000_ODDOFFSET+addr-1):(addr))
+#define	NE2000_DATA_PTR(addr)	(addr)
+#endif
+
+
+void ne2000_outb(unsigned int val, unsigned int addr)
+{
+	NE2000_BYTE	*rp;
+
+	rp = (NE2000_BYTE *) NE2000_PTR(addr);
+	*rp = RSWAP(val);
+}
+
+int ne2000_inb(unsigned int addr)
+{
+	NE2000_BYTE	*rp, val;
+
+	rp = (NE2000_BYTE *) NE2000_PTR(addr);
+	val = *rp;
+	return((int) ((NE2000_BYTE) RSWAP(val)));
+}
+
+void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len)
+{
+	NE2000_BYTE	*rp, val;
+	unsigned char	*buf;
+
+	buf = (unsigned char *) vbuf;
+	rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
+	for (; (len > 0); len--) {
+		val = *rp;
+		*buf++ = RSWAP(val);
+	}
+}
+
+void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len)
+{
+	volatile unsigned short	*rp;
+	unsigned short		w, *buf;
+
+	buf = (unsigned short *) vbuf;
+	rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
+	for (; (len > 0); len--) {
+		w = *rp;
+		*buf++ = BSWAP(w);
+	}
+}
+
+void ne2000_outsb(unsigned int addr, const void *vbuf, unsigned long len)
+{
+	NE2000_BYTE	*rp, val;
+	unsigned char	*buf;
+
+	buf = (unsigned char *) vbuf;
+	rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
+	for (; (len > 0); len--) {
+		val = *buf++;
+		*rp = RSWAP(val);
+	}
+}
+
+void ne2000_outsw(unsigned int addr, const void *vbuf, unsigned long len)
+{
+	volatile unsigned short	*rp;
+	unsigned short		w, *buf;
+
+	buf = (unsigned short *) vbuf;
+	rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
+	for (; (len > 0); len--) {
+		w = *buf++;
+		*rp = BSWAP(w);
+	}
+}
+
+#endif /* COLDFIRE_NE2000_FUNCS */
+#endif /* NE2000_OFFOFFSET */
+
+/****************************************************************************/
+
+#ifdef COLDFIRE_NE2000_FUNCS
+
+/*
+ *	Lastly the interrupt set up code...
+ *	Minor differences between the different board types.
+ */
+
+#if defined(CONFIG_M5206) && defined(CONFIG_ARNEWSH)
+void ne2000_irqsetup(int irq)
+{
+	volatile unsigned char  *icrp;
+
+	icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4);
+	*icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2;
+	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4);
+}
+#endif
+
+#if defined(CONFIG_M5206e) && defined(CONFIG_MOTOROLA)
+void ne2000_irqsetup(int irq)
+{
+	volatile unsigned char  *icrp;
+
+	icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4);
+	*icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2 | MCFSIM_ICR_AUTOVEC;
+	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4);
+}
+#endif
+
+#if defined(CONFIG_M5206e) && defined(CONFIG_CFV240)
+void ne2000_irqsetup(int irq)
+{
+	volatile unsigned char  *icrp;
+
+	icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR1);
+	*icrp = MCFSIM_ICR_LEVEL1 | MCFSIM_ICR_PRI2 | MCFSIM_ICR_AUTOVEC;
+	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT1);
+}
+#endif
+
+#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
+void ne2000_irqsetup(int irq)
+{
+	mcf_autovector(irq);
+}
+#endif
+
+#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
+void ne2000_irqsetup(int irq)
+{
+	volatile unsigned long	*icrp;
+	volatile unsigned long	*pitr;
+
+	/* The NE2000 device uses external IRQ3 */
+	icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
+	*icrp = (*icrp & 0x77077777) | 0x00d00000;
+
+	pitr = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PITR);
+	*pitr = *pitr | 0x20000000;
+}
+
+void ne2000_irqack(int irq)
+{
+	volatile unsigned long	*icrp;
+
+	/* The NE2000 device uses external IRQ3 */
+	icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
+	*icrp = (*icrp & 0x77777777) | 0x00800000;
+}
+#endif
+
+#if defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
+
+void ne2000_irqsetup(int irq)
+{
+	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3);
+	mcf_autovector(irq);
+}
+
+#else
+
+void ne2000_irqsetup(int irq)
+{
+	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3);
+}
+
+#endif /* ! CONFIG_NETtel || CONFIG_SECUREEDGEMP3 */
+#endif /* CONFIG_M5307 || CONFIG_M5407 */
+
+#endif /* COLDFIRE_NE2000_FUNCS */
+
+/****************************************************************************/
+#endif	/* mcfne_h */

include/asm-m68knommu/mcfpci.h

@@ -0,0 +1,120 @@
+/****************************************************************************/
+
+/*
+ *	mcfpci.h -- PCI bridge on ColdFire eval boards.
+ *
+ *	(C) Copyright 2000, Greg Ungerer (gerg@snapgear.com)
+ *	(C) Copyright 2000, Lineo Inc. (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef	mcfpci_h
+#define	mcfpci_h
+/****************************************************************************/
+
+#include <linux/config.h>
+
+#ifdef CONFIG_PCI
+
+/*
+ *	Address regions in the PCI address space are not mapped into the
+ *	normal memory space of the ColdFire. They must be accessed via
+ *	handler routines. This is easy for I/O space (inb/outb/etc) but
+ *	needs some code changes to support ordinary memory. Interrupts
+ *	also need to be vectored through the PCI handler first, then it
+ *	will call the actual driver sub-handlers.
+ */
+
+/*
+ *	Un-define all the standard I/O access routines.
+ */
+#undef	inb
+#undef	inw
+#undef	inl
+#undef	inb_p
+#undef	inw_p
+#undef	insb
+#undef	insw
+#undef	insl
+#undef	outb
+#undef	outw
+#undef	outl
+#undef	outb_p
+#undef	outw_p
+#undef	outsb
+#undef	outsw
+#undef	outsl
+
+#undef	request_irq
+#undef	free_irq
+
+#undef	bus_to_virt
+#undef	virt_to_bus
+
+
+/*
+ *	Re-direct all I/O memory accesses functions to PCI specific ones.
+ */
+#define	inb	pci_inb
+#define	inw	pci_inw
+#define	inl	pci_inl
+#define	inb_p	pci_inb
+#define	inw_p	pci_inw
+#define	insb	pci_insb
+#define	insw	pci_insw
+#define	insl	pci_insl
+
+#define	outb	pci_outb
+#define	outw	pci_outw
+#define	outl	pci_outl
+#define	outb_p	pci_outb
+#define	outw_p	pci_outw
+#define	outsb	pci_outsb
+#define	outsw	pci_outsw
+#define	outsl	pci_outsl
+
+#define	request_irq	pci_request_irq
+#define	free_irq	pci_free_irq
+
+#define	virt_to_bus	pci_virt_to_bus
+#define	bus_to_virt	pci_bus_to_virt
+
+#define	CONFIG_COMEMPCI	1
+
+
+/*
+ *	Prototypes of the real PCI functions (defined in bios32.c).
+ */
+unsigned char	pci_inb(unsigned int addr);
+unsigned short	pci_inw(unsigned int addr);
+unsigned int	pci_inl(unsigned int addr);
+void		pci_insb(void *addr, void *buf, int len);
+void		pci_insw(void *addr, void *buf, int len);
+void		pci_insl(void *addr, void *buf, int len);
+
+void		pci_outb(unsigned char val, unsigned int addr);
+void		pci_outw(unsigned short val, unsigned int addr);
+void		pci_outl(unsigned int val, unsigned int addr);
+void		pci_outsb(void *addr, void *buf, int len);
+void		pci_outsw(void *addr, void *buf, int len);
+void		pci_outsl(void *addr, void *buf, int len);
+
+int		pci_request_irq(unsigned int irq,
+			void (*handler)(int, void *, struct pt_regs *),
+			unsigned long flags,
+			const char *device,
+			void *dev_id);
+void		pci_free_irq(unsigned int irq, void *dev_id);
+
+void		*pci_bmalloc(int size);
+void		pci_bmfree(void *bmp, int len);
+void		pci_copytoshmem(unsigned long bmp, void *src, int size);
+void		pci_copyfromshmem(void *dst, unsigned long bmp, int size);
+unsigned long	pci_virt_to_bus(volatile void *address);
+void		*pci_bus_to_virt(unsigned long address);
+void		pci_bmcpyto(void *dst, void *src, int len);
+void		pci_bmcpyfrom(void *dst, void *src, int len);
+
+#endif /* CONFIG_PCI */
+/****************************************************************************/
+#endif	/* mcfpci_h */

include/asm-m68knommu/mcfpit.h

@@ -0,0 +1,63 @@
+/****************************************************************************/
+
+/*
+ *	mcfpit.h -- ColdFire internal PIT timer support defines.
+ *
+ *	(C) Copyright 2003, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef	mcfpit_h
+#define	mcfpit_h
+/****************************************************************************/
+
+#include <linux/config.h>
+
+/*
+ *	Get address specific defines for the 5270/5271 and 5280/5282.
+ */
+#define	MCFPIT_BASE1		0x00150000	/* Base address of TIMER1 */
+#define	MCFPIT_BASE2		0x00160000	/* Base address of TIMER2 */
+#define	MCFPIT_BASE3		0x00170000	/* Base address of TIMER3 */
+#define	MCFPIT_BASE4		0x00180000	/* Base address of TIMER4 */
+
+
+/*
+ *	Define the PIT timer register set addresses.
+ */
+struct mcfpit {
+	unsigned short	pcsr;			/* PIT control and status */
+	unsigned short	pmr;			/* PIT modulus register */
+	unsigned short	pcntr;			/* PIT count register */
+} __attribute__((packed));
+
+/*
+ *	Bit definitions for the PIT Control and Status register.
+ */
+#define	MCFPIT_PCSR_CLK1	0x0000		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK2	0x0100		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK4	0x0200		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK8	0x0300		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK16	0x0400		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK32	0x0500		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK64	0x0600		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK128	0x0700		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK256	0x0800		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK512	0x0900		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK1024	0x0a00		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK2048	0x0b00		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK4096	0x0c00		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK8192	0x0d00		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK16384	0x0e00		/* System clock divisor */
+#define	MCFPIT_PCSR_CLK32768	0x0f00		/* System clock divisor */
+#define	MCFPIT_PCSR_DOZE	0x0040		/* Clock run in doze mode */
+#define	MCFPIT_PCSR_HALTED	0x0020		/* Clock run in halt mode */
+#define	MCFPIT_PCSR_OVW		0x0010		/* Overwrite PIT counter now */
+#define	MCFPIT_PCSR_PIE		0x0008		/* Enable PIT interrupt */
+#define	MCFPIT_PCSR_PIF		0x0004		/* PIT interrupt flag */
+#define	MCFPIT_PCSR_RLD		0x0002		/* Reload counter */
+#define	MCFPIT_PCSR_EN		0x0001		/* Enable PIT */
+#define	MCFPIT_PCSR_DISABLE	0x0000		/* Disable PIT */
+
+/****************************************************************************/
+#endif	/* mcfpit_h */

include/asm-m68knommu/mcfsim.h

@@ -0,0 +1,109 @@
+/****************************************************************************/
+
+/*
+ *	mcfsim.h -- ColdFire System Integration Module support.
+ *
+ *	(C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
+ * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef	mcfsim_h
+#define	mcfsim_h
+/****************************************************************************/
+
+#include <linux/config.h>
+
+/*
+ *	Include 5204, 5206/e, 5249, 5270/5271, 5272, 5280/5282, 5307 or
+ *	5407 specific addresses.
+ */
+#if defined(CONFIG_M5204)
+#include <asm/m5204sim.h>
+#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#include <asm/m5206sim.h>
+#elif defined(CONFIG_M5249)
+#include <asm/m5249sim.h>
+#elif defined(CONFIG_M527x)
+#include <asm/m527xsim.h>
+#elif defined(CONFIG_M5272)
+#include <asm/m5272sim.h>
+#elif defined(CONFIG_M528x)
+#include <asm/m528xsim.h>
+#elif defined(CONFIG_M5307)
+#include <asm/m5307sim.h>
+#elif defined(CONFIG_M5407)
+#include <asm/m5407sim.h>
+#endif
+
+
+/*
+ *	Define the base address of the SIM within the MBAR address space.
+ */
+#define	MCFSIM_BASE		0x0		/* Base address of SIM */
+
+
+/*
+ *	Bit definitions for the ICR family of registers.
+ */
+#define	MCFSIM_ICR_AUTOVEC	0x80		/* Auto-vectored intr */
+#define	MCFSIM_ICR_LEVEL0	0x00		/* Level 0 intr */
+#define	MCFSIM_ICR_LEVEL1	0x04		/* Level 1 intr */
+#define	MCFSIM_ICR_LEVEL2	0x08		/* Level 2 intr */
+#define	MCFSIM_ICR_LEVEL3	0x0c		/* Level 3 intr */
+#define	MCFSIM_ICR_LEVEL4	0x10		/* Level 4 intr */
+#define	MCFSIM_ICR_LEVEL5	0x14		/* Level 5 intr */
+#define	MCFSIM_ICR_LEVEL6	0x18		/* Level 6 intr */
+#define	MCFSIM_ICR_LEVEL7	0x1c		/* Level 7 intr */
+
+#define	MCFSIM_ICR_PRI0		0x00		/* Priority 0 intr */
+#define	MCFSIM_ICR_PRI1		0x01		/* Priority 1 intr */
+#define	MCFSIM_ICR_PRI2		0x02		/* Priority 2 intr */
+#define	MCFSIM_ICR_PRI3		0x03		/* Priority 3 intr */
+
+/*
+ *	Bit definitions for the Interrupt Mask register (IMR).
+ */
+#define	MCFSIM_IMR_EINT1	0x0002		/* External intr # 1 */
+#define	MCFSIM_IMR_EINT2	0x0004		/* External intr # 2 */
+#define	MCFSIM_IMR_EINT3	0x0008		/* External intr # 3 */
+#define	MCFSIM_IMR_EINT4	0x0010		/* External intr # 4 */
+#define	MCFSIM_IMR_EINT5	0x0020		/* External intr # 5 */
+#define	MCFSIM_IMR_EINT6	0x0040		/* External intr # 6 */
+#define	MCFSIM_IMR_EINT7	0x0080		/* External intr # 7 */
+
+#define	MCFSIM_IMR_SWD		0x0100		/* Software Watchdog intr */
+#define	MCFSIM_IMR_TIMER1	0x0200		/* TIMER 1 intr */
+#define	MCFSIM_IMR_TIMER2	0x0400		/* TIMER 2 intr */
+#define MCFSIM_IMR_MBUS		0x0800		/* MBUS intr	*/
+#define	MCFSIM_IMR_UART1	0x1000		/* UART 1 intr */
+#define	MCFSIM_IMR_UART2	0x2000		/* UART 2 intr */
+
+#if defined(CONFIG_M5206e)
+#define	MCFSIM_IMR_DMA1		0x4000		/* DMA 1 intr */
+#define	MCFSIM_IMR_DMA2		0x8000		/* DMA 2 intr */
+#elif defined(CONFIG_M5249) || defined(CONFIG_M5307)
+#define	MCFSIM_IMR_DMA0		0x4000		/* DMA 0 intr */
+#define	MCFSIM_IMR_DMA1		0x8000		/* DMA 1 intr */
+#define	MCFSIM_IMR_DMA2		0x10000		/* DMA 2 intr */
+#define	MCFSIM_IMR_DMA3		0x20000		/* DMA 3 intr */
+#endif
+
+/*
+ *	Mask for all of the SIM devices. Some parts have more or less
+ *	SIM devices. This is a catchall for the sandard set.
+ */
+#ifndef MCFSIM_IMR_MASKALL
+#define	MCFSIM_IMR_MASKALL	0x3ffe		/* All intr sources */
+#endif
+
+
+#ifndef __ASSEMBLY__
+/*
+ *	Definition for the interrupt auto-vectoring support.
+ */
+extern void	mcf_autovector(unsigned int vec);
+#endif /* __ASSEMBLY__ */
+
+/****************************************************************************/
+#endif	/* mcfsim_h */

include/asm-m68knommu/mcfsmc.h

@@ -0,0 +1,188 @@
+/****************************************************************************/
+
+/*
+ *	mcfsmc.h -- SMC ethernet support for ColdFire environments.
+ *
+ *	(C) Copyright 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ *	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef	mcfsmc_h
+#define	mcfsmc_h
+/****************************************************************************/
+
+/*
+ *	None of the current ColdFire targets that use the SMC91x111
+ *	allow 8 bit accesses. So this code is 16bit access only.
+ */
+
+#include <linux/config.h>
+
+#undef	outb
+#undef	inb
+#undef	outw
+#undef	outwd
+#undef	inw	
+#undef	outl
+#undef	inl
+
+#undef	outsb
+#undef	outsw
+#undef	outsl
+#undef	insb
+#undef	insw
+#undef	insl
+
+/*
+ *	Re-defines for ColdFire environment... The SMC part is
+ *	mapped into memory space, so remap the PC-style in/out
+ *	routines to handle that.
+ */
+#define	outb	smc_outb
+#define	inb	smc_inb
+#define	outw	smc_outw
+#define	outwd	smc_outwd
+#define	inw	smc_inw
+#define	outl	smc_outl
+#define	inl	smc_inl
+
+#define	outsb	smc_outsb
+#define	outsw	smc_outsw
+#define	outsl	smc_outsl
+#define	insb	smc_insb
+#define	insw	smc_insw
+#define	insl	smc_insl
+
+
+static inline int smc_inb(unsigned int addr)
+{
+	register unsigned short	w;
+	w = *((volatile unsigned short *) (addr & ~0x1));
+	return(((addr & 0x1) ? w : (w >> 8)) & 0xff);
+}
+
+static inline void smc_outw(unsigned int val, unsigned int addr)
+{
+	*((volatile unsigned short *) addr) = (val << 8) | (val >> 8);
+}
+
+static inline int smc_inw(unsigned int addr)
+{
+	register unsigned short	w;
+	w = *((volatile unsigned short *) addr);
+	return(((w << 8) | (w >> 8)) & 0xffff);
+}
+
+static inline void smc_outl(unsigned long val, unsigned int addr)
+{
+	*((volatile unsigned long *) addr) = 
+		((val << 8) & 0xff000000) | ((val >> 8) & 0x00ff0000) |
+		((val << 8) & 0x0000ff00) | ((val >> 8) & 0x000000ff);
+}
+
+static inline void smc_outwd(unsigned int val, unsigned int addr)
+{
+	*((volatile unsigned short *) addr) = val;
+}
+
+
+/*
+ *	The rep* functions are used to feed the data port with
+ *	raw data. So we do not byte swap them when copying.
+ */
+
+static inline void smc_insb(unsigned int addr, void *vbuf, int unsigned long len)
+{
+	volatile unsigned short	*rp;
+	unsigned short		*buf, *ebuf;
+
+	buf = (unsigned short *) vbuf;
+	rp = (volatile unsigned short *) addr;
+
+	/* Copy as words for as long as possible */
+	for (ebuf = buf + (len >> 1); (buf < ebuf); )
+		*buf++ = *rp;
+
+	/* Lastly, handle left over byte */
+	if (len & 0x1)
+		*((unsigned char *) buf) = (*rp >> 8) & 0xff;
+}
+
+static inline void smc_insw(unsigned int addr, void *vbuf, unsigned long len)
+{
+	volatile unsigned short	*rp;
+	unsigned short		*buf, *ebuf;
+
+	buf = (unsigned short *) vbuf;
+	rp = (volatile unsigned short *) addr;
+	for (ebuf = buf + len; (buf < ebuf); )
+		*buf++ = *rp;
+}
+
+static inline void smc_insl(unsigned int addr, void *vbuf, unsigned long len)
+{
+	volatile unsigned long	*rp;
+	unsigned long		*buf, *ebuf;
+
+	buf = (unsigned long *) vbuf;
+	rp = (volatile unsigned long *) addr;
+	for (ebuf = buf + len; (buf < ebuf); )
+		*buf++ = *rp;
+}
+
+static inline void smc_outsw(unsigned int addr, const void *vbuf, unsigned long len)
+{
+	volatile unsigned short	*rp;
+	unsigned short		*buf, *ebuf;
+
+	buf = (unsigned short *) vbuf;
+	rp = (volatile unsigned short *) addr;
+	for (ebuf = buf + len; (buf < ebuf); )
+		*rp = *buf++;
+}
+
+static inline void smc_outsl(unsigned int addr, void *vbuf, unsigned long len)
+{
+	volatile unsigned long	*rp;
+	unsigned long		*buf, *ebuf;
+
+	buf = (unsigned long *) vbuf;
+	rp = (volatile unsigned long *) addr;
+	for (ebuf = buf + len; (buf < ebuf); )
+		*rp = *buf++;
+}
+
+
+#ifdef CONFIG_NETtel
+/*
+ *	Re-map the address space of at least one of the SMC ethernet
+ *	parts. Both parts power up decoding the same address, so we
+ *	need to move one of them first, before doing enything else.
+ *
+ *	We also increase the number of wait states for this part by one.
+ */
+
+void smc_remap(unsigned int ioaddr)
+{
+	static int		once = 0;
+	extern unsigned short	ppdata;
+	if (once++ == 0) {
+		*((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADDR)) = 0x00ec;
+		ppdata |= 0x0080;
+		*((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata;
+		outw(0x0001, ioaddr + BANK_SELECT);
+		outw(0x0001, ioaddr + BANK_SELECT);
+		outw(0x0067, ioaddr + BASE);
+
+		ppdata &= ~0x0080;
+		*((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata;
+	}
+	
+	*((volatile unsigned short *)(MCF_MBAR+MCFSIM_CSCR3)) = 0x1180;
+}
+
+#endif
+
+/****************************************************************************/
+#endif	/* mcfsmc_h */

include/asm-m68knommu/mcftimer.h

@@ -0,0 +1,85 @@
+/****************************************************************************/
+
+/*
+ *	mcftimer.h -- ColdFire internal TIMER support defines.
+ *
+ *	(C) Copyright 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef	mcftimer_h
+#define	mcftimer_h
+/****************************************************************************/
+
+#include <linux/config.h>
+
+/*
+ *	Get address specific defines for this ColdFire member.
+ */
+#if defined(CONFIG_M5204) || defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#define	MCFTIMER_BASE1		0x100		/* Base address of TIMER1 */
+#define	MCFTIMER_BASE2		0x120		/* Base address of TIMER2 */
+#elif defined(CONFIG_M5272)
+#define MCFTIMER_BASE1		0x200           /* Base address of TIMER1 */
+#define MCFTIMER_BASE2		0x220           /* Base address of TIMER2 */
+#define MCFTIMER_BASE3		0x240           /* Base address of TIMER4 */
+#define MCFTIMER_BASE4		0x260           /* Base address of TIMER3 */
+#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#define MCFTIMER_BASE1		0x140           /* Base address of TIMER1 */
+#define MCFTIMER_BASE2		0x180           /* Base address of TIMER2 */
+#endif
+
+
+/*
+ *	Define the TIMER register set addresses.
+ */
+#define	MCFTIMER_TMR		0x00		/* Timer Mode reg (r/w) */
+#define	MCFTIMER_TRR		0x02		/* Timer Reference (r/w) */
+#define	MCFTIMER_TCR		0x04		/* Timer Capture reg (r/w) */
+#define	MCFTIMER_TCN		0x06		/* Timer Counter reg (r/w) */
+#define	MCFTIMER_TER		0x11		/* Timer Event reg (r/w) */
+
+struct mcftimer {
+	unsigned short	tmr;			/* Timer Mode reg (r/w) */
+	unsigned short	reserved1;
+	unsigned short	trr;			/* Timer Reference (r/w) */
+	unsigned short	reserved2;
+	unsigned short	tcr;			/* Timer Capture reg (r/w) */
+	unsigned short	reserved3;
+	unsigned short	tcn;			/* Timer Counter reg (r/w) */
+	unsigned short	reserved4;
+	unsigned char	reserved5;
+	unsigned char	ter;			/* Timer Event reg (r/w) */
+} __attribute__((packed));
+
+/*
+ *	Bit definitions for the Timer Mode Register (TMR).
+ *	Register bit flags are common accross ColdFires.
+ */
+#define	MCFTIMER_TMR_PREMASK	0xff00		/* Prescalar mask */
+#define	MCFTIMER_TMR_DISCE	0x0000		/* Disable capture */
+#define	MCFTIMER_TMR_ANYCE	0x00c0		/* Capture any edge */
+#define	MCFTIMER_TMR_FALLCE	0x0080		/* Capture fallingedge */
+#define	MCFTIMER_TMR_RISECE	0x0040		/* Capture rising edge */
+#define	MCFTIMER_TMR_ENOM	0x0020		/* Enable output toggle */
+#define	MCFTIMER_TMR_DISOM	0x0000		/* Do single output pulse  */
+#define	MCFTIMER_TMR_ENORI	0x0010		/* Enable ref interrupt */
+#define	MCFTIMER_TMR_DISORI	0x0000		/* Disable ref interrupt */
+#define	MCFTIMER_TMR_RESTART	0x0008		/* Restart counter */
+#define	MCFTIMER_TMR_FREERUN	0x0000		/* Free running counter */
+#define	MCFTIMER_TMR_CLKTIN	0x0006		/* Input clock is TIN */
+#define	MCFTIMER_TMR_CLK16	0x0004		/* Input clock is /16 */
+#define	MCFTIMER_TMR_CLK1	0x0002		/* Input clock is /1 */
+#define	MCFTIMER_TMR_CLKSTOP	0x0000		/* Stop counter */
+#define	MCFTIMER_TMR_ENABLE	0x0001		/* Enable timer */
+#define	MCFTIMER_TMR_DISABLE	0x0000		/* Disable timer */
+
+/*
+ *	Bit definitions for the Timer Event Registers (TER).
+ */
+#define	MCFTIMER_TER_CAP	0x01		/* Capture event */
+#define	MCFTIMER_TER_REF	0x02		/* Refernece event */
+
+/****************************************************************************/
+#endif	/* mcftimer_h */

include/asm-m68knommu/mcfuart.h

@@ -0,0 +1,200 @@
+/****************************************************************************/
+
+/*
+ *	mcfuart.h -- ColdFire internal UART support defines.
+ *
+ *	(C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
+ * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef	mcfuart_h
+#define	mcfuart_h
+/****************************************************************************/
+
+#include <linux/config.h>
+
+/*
+ *	Define the base address of the UARTS within the MBAR address
+ *	space.
+ */
+#if defined(CONFIG_M5272)
+#define	MCFUART_BASE1		0x100		/* Base address of UART1 */
+#define	MCFUART_BASE2		0x140		/* Base address of UART2 */
+#elif defined(CONFIG_M5204) || defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#if defined(CONFIG_NETtel)
+#define	MCFUART_BASE1		0x180		/* Base address of UART1 */
+#define	MCFUART_BASE2		0x140		/* Base address of UART2 */
+#else
+#define	MCFUART_BASE1		0x140		/* Base address of UART1 */
+#define	MCFUART_BASE2		0x180		/* Base address of UART2 */
+#endif
+#elif defined(CONFIG_M527x) || defined(CONFIG_M528x)
+#define MCFUART_BASE1		0x200           /* Base address of UART1 */
+#define MCFUART_BASE2		0x240           /* Base address of UART2 */
+#define MCFUART_BASE3		0x280           /* Base address of UART3 */
+#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#if defined(CONFIG_NETtel) || defined(CONFIG_DISKtel) || defined(CONFIG_SECUREEDGEMP3)
+#define MCFUART_BASE1		0x200           /* Base address of UART1 */
+#define MCFUART_BASE2		0x1c0           /* Base address of UART2 */
+#else
+#define MCFUART_BASE1		0x1c0           /* Base address of UART1 */
+#define MCFUART_BASE2		0x200           /* Base address of UART2 */
+#endif
+#endif
+
+
+/*
+ *	Define the ColdFire UART register set addresses.
+ */
+#define	MCFUART_UMR		0x00		/* Mode register (r/w) */
+#define	MCFUART_USR		0x04		/* Status register (r) */
+#define	MCFUART_UCSR		0x04		/* Clock Select (w) */
+#define	MCFUART_UCR		0x08		/* Command register (w) */
+#define	MCFUART_URB		0x0c		/* Receiver Buffer (r) */
+#define	MCFUART_UTB		0x0c		/* Transmit Buffer (w) */
+#define	MCFUART_UIPCR		0x10		/* Input Port Change (r) */
+#define	MCFUART_UACR		0x10		/* Auxiliary Control (w) */
+#define	MCFUART_UISR		0x14		/* Interrup Status (r) */
+#define	MCFUART_UIMR		0x14		/* Interrupt Mask (w) */
+#define	MCFUART_UBG1		0x18		/* Baud Rate MSB (r/w) */
+#define	MCFUART_UBG2		0x1c		/* Baud Rate LSB (r/w) */
+#ifdef	CONFIG_M5272
+#define	MCFUART_UTF		0x28		/* Transmitter FIFO (r/w) */
+#define	MCFUART_URF		0x2c		/* Receiver FIFO (r/w) */
+#define	MCFUART_UFPD		0x30		/* Frac Prec. Divider (r/w) */
+#else
+#define	MCFUART_UIVR		0x30		/* Interrupt Vector (r/w) */
+#endif
+#define	MCFUART_UIPR		0x34		/* Input Port (r) */
+#define	MCFUART_UOP1		0x38		/* Output Port Bit Set (w) */
+#define	MCFUART_UOP0		0x3c		/* Output Port Bit Reset (w) */
+
+
+/*
+ *	Define bit flags in Mode Register 1 (MR1).
+ */
+#define	MCFUART_MR1_RXRTS	0x80		/* Auto RTS flow control */
+#define	MCFUART_MR1_RXIRQFULL	0x40		/* RX IRQ type FULL */
+#define	MCFUART_MR1_RXIRQRDY	0x00		/* RX IRQ type RDY */
+#define	MCFUART_MR1_RXERRBLOCK	0x20		/* RX block error mode */
+#define	MCFUART_MR1_RXERRCHAR	0x00		/* RX char error mode */
+
+#define	MCFUART_MR1_PARITYNONE	0x10		/* No parity */
+#define	MCFUART_MR1_PARITYEVEN	0x00		/* Even parity */
+#define	MCFUART_MR1_PARITYODD	0x04		/* Odd parity */
+#define	MCFUART_MR1_PARITYSPACE	0x08		/* Space parity */
+#define	MCFUART_MR1_PARITYMARK	0x0c		/* Mark parity */
+
+#define	MCFUART_MR1_CS5		0x00		/* 5 bits per char */
+#define	MCFUART_MR1_CS6		0x01		/* 6 bits per char */
+#define	MCFUART_MR1_CS7		0x02		/* 7 bits per char */
+#define	MCFUART_MR1_CS8		0x03		/* 8 bits per char */
+
+/*
+ *	Define bit flags in Mode Register 2 (MR2).
+ */
+#define	MCFUART_MR2_LOOPBACK	0x80		/* Loopback mode */
+#define	MCFUART_MR2_REMOTELOOP	0xc0		/* Remote loopback mode */
+#define	MCFUART_MR2_AUTOECHO	0x40		/* Automatic echo */
+#define	MCFUART_MR2_TXRTS	0x20		/* Assert RTS on TX */
+#define	MCFUART_MR2_TXCTS	0x10		/* Auto CTS flow control */
+
+#define	MCFUART_MR2_STOP1	0x07		/* 1 stop bit */
+#define	MCFUART_MR2_STOP15	0x08		/* 1.5 stop bits */
+#define	MCFUART_MR2_STOP2	0x0f		/* 2 stop bits */
+
+/*
+ *	Define bit flags in Status Register (USR).
+ */
+#define	MCFUART_USR_RXBREAK	0x80		/* Received BREAK */
+#define	MCFUART_USR_RXFRAMING	0x40		/* Received framing error */
+#define	MCFUART_USR_RXPARITY	0x20		/* Received parity error */
+#define	MCFUART_USR_RXOVERRUN	0x10		/* Received overrun error */
+#define	MCFUART_USR_TXEMPTY	0x08		/* Transmitter empty */
+#define	MCFUART_USR_TXREADY	0x04		/* Transmitter ready */
+#define	MCFUART_USR_RXFULL	0x02		/* Receiver full */
+#define	MCFUART_USR_RXREADY	0x01		/* Receiver ready */
+
+#define	MCFUART_USR_RXERR	(MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \
+				MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN)
+
+/*
+ *	Define bit flags in Clock Select Register (UCSR).
+ */
+#define	MCFUART_UCSR_RXCLKTIMER	0xd0		/* RX clock is timer */
+#define	MCFUART_UCSR_RXCLKEXT16	0xe0		/* RX clock is external x16 */
+#define	MCFUART_UCSR_RXCLKEXT1	0xf0		/* RX clock is external x1 */
+
+#define	MCFUART_UCSR_TXCLKTIMER	0x0d		/* TX clock is timer */
+#define	MCFUART_UCSR_TXCLKEXT16	0x0e		/* TX clock is external x16 */
+#define	MCFUART_UCSR_TXCLKEXT1	0x0f		/* TX clock is external x1 */
+
+/*
+ *	Define bit flags in Command Register (UCR).
+ */
+#define	MCFUART_UCR_CMDNULL		0x00	/* No command */
+#define	MCFUART_UCR_CMDRESETMRPTR	0x10	/* Reset MR pointer */
+#define	MCFUART_UCR_CMDRESETRX		0x20	/* Reset receiver */
+#define	MCFUART_UCR_CMDRESETTX		0x30	/* Reset transmitter */
+#define	MCFUART_UCR_CMDRESETERR		0x40	/* Reset error status */
+#define	MCFUART_UCR_CMDRESETBREAK	0x50	/* Reset BREAK change */
+#define	MCFUART_UCR_CMDBREAKSTART	0x60	/* Start BREAK */
+#define	MCFUART_UCR_CMDBREAKSTOP	0x70	/* Stop BREAK */
+
+#define	MCFUART_UCR_TXNULL	0x00		/* No TX command */
+#define	MCFUART_UCR_TXENABLE	0x04		/* Enable TX */
+#define	MCFUART_UCR_TXDISABLE	0x08		/* Disable TX */
+#define	MCFUART_UCR_RXNULL	0x00		/* No RX command */
+#define	MCFUART_UCR_RXENABLE	0x01		/* Enable RX */
+#define	MCFUART_UCR_RXDISABLE	0x02		/* Disable RX */
+
+/*
+ *	Define bit flags in Input Port Change Register (UIPCR).
+ */
+#define	MCFUART_UIPCR_CTSCOS	0x10		/* CTS change of state */
+#define	MCFUART_UIPCR_CTS	0x01		/* CTS value */
+
+/*
+ *	Define bit flags in Input Port Register (UIP).
+ */
+#define	MCFUART_UIPR_CTS	0x01		/* CTS value */
+
+/*
+ *	Define bit flags in Output Port Registers (UOP).
+ *	Clear bit by writing to UOP0, set by writing to UOP1.
+ */
+#define	MCFUART_UOP_RTS		0x01		/* RTS set or clear */
+
+/*
+ *	Define bit flags in the Auxiliary Control Register (UACR).
+ */
+#define	MCFUART_UACR_IEC	0x01		/* Input enable control */
+
+/*
+ *	Define bit flags in Interrupt Status Register (UISR).
+ *	These same bits are used for the Interrupt Mask Register (UIMR).
+ */
+#define	MCFUART_UIR_COS		0x80		/* Change of state (CTS) */
+#define	MCFUART_UIR_DELTABREAK	0x04		/* Break start or stop */
+#define	MCFUART_UIR_RXREADY	0x02		/* Receiver ready */
+#define	MCFUART_UIR_TXREADY	0x01		/* Transmitter ready */
+
+#ifdef	CONFIG_M5272
+/*
+ *	Define bit flags in the Transmitter FIFO Register (UTF).
+ */
+#define	MCFUART_UTF_TXB		0x1f		/* Transmitter data level */
+#define	MCFUART_UTF_FULL	0x20		/* Transmitter fifo full */
+#define	MCFUART_UTF_TXS		0xc0		/* Transmitter status */
+
+/*
+ *	Define bit flags in the Receiver FIFO Register (URF).
+ */
+#define	MCFUART_URF_RXB		0x1f		/* Receiver data level */
+#define	MCFUART_URF_FULL	0x20		/* Receiver fifo full */
+#define	MCFUART_URF_RXS		0xc0		/* Receiver status */
+#endif
+
+/****************************************************************************/
+#endif	/* mcfuart_h */

include/asm-m68knommu/mcfwdebug.h

@@ -0,0 +1,119 @@
+/****************************************************************************/
+
+/*
+ *	mcfdebug.h -- ColdFire Debug Module support.
+ *
+ * 	(C) Copyright 2001, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef mcfdebug_h
+#define mcfdebug_h
+/****************************************************************************/
+#include <linux/config.h>
+
+/* Define the debug module registers */
+#define MCFDEBUG_CSR	0x0			/* Configuration status		*/
+#define MCFDEBUG_BAAR	0x5			/* BDM address attribute	*/
+#define MCFDEBUG_AATR	0x6			/* Address attribute trigger	*/
+#define MCFDEBUG_TDR	0x7			/* Trigger definition		*/
+#define MCFDEBUG_PBR	0x8			/* PC breakpoint		*/
+#define MCFDEBUG_PBMR	0x9			/* PC breakpoint mask		*/
+#define MCFDEBUG_ABHR	0xc			/* High address breakpoint	*/
+#define MCFDEBUG_ABLR	0xd			/* Low address breakpoint	*/
+#define MCFDEBUG_DBR	0xe			/* Data breakpoint		*/
+#define MCFDEBUG_DBMR	0xf			/* Data breakpoint mask		*/
+
+/* Define some handy constants for the trigger definition register */
+#define MCFDEBUG_TDR_TRC_DISP	0x00000000	/* display on DDATA only	*/
+#define MCFDEBUG_TDR_TRC_HALT	0x40000000	/* Processor halt on BP		*/
+#define MCFDEBUG_TDR_TRC_INTR	0x80000000	/* Debug intr on BP		*/
+#define MCFDEBUG_TDR_LXT1	0x00004000	/* TDR level 1			*/
+#define MCFDEBUG_TDR_LXT2	0x00008000	/* TDR level 2			*/
+#define MCFDEBUG_TDR_EBL1	0x00002000	/* Enable breakpoint level 1	*/
+#define MCFDEBUG_TDR_EBL2	0x20000000	/* Enable breakpoint level 2	*/
+#define MCFDEBUG_TDR_EDLW1	0x00001000	/* Enable data BP longword	*/
+#define MCFDEBUG_TDR_EDLW2	0x10000000
+#define MCFDEBUG_TDR_EDWL1	0x00000800	/* Enable data BP lower word	*/
+#define MCFDEBUG_TDR_EDWL2	0x08000000
+#define MCFDEBUG_TDR_EDWU1	0x00000400	/* Enable data BP upper word	*/
+#define MCFDEBUG_TDR_EDWU2	0x04000000
+#define MCFDEBUG_TDR_EDLL1	0x00000200	/* Enable data BP low low byte	*/
+#define MCFDEBUG_TDR_EDLL2	0x02000000
+#define MCFDEBUG_TDR_EDLM1	0x00000100	/* Enable data BP low mid byte	*/
+#define MCFDEBUG_TDR_EDLM2	0x01000000
+#define MCFDEBUG_TDR_EDUM1	0x00000080	/* Enable data BP up mid byte	*/
+#define MCFDEBUG_TDR_EDUM2	0x00800000
+#define MCFDEBUG_TDR_EDUU1	0x00000040	/* Enable data BP up up byte	*/
+#define MCFDEBUG_TDR_EDUU2	0x00400000
+#define MCFDEBUG_TDR_DI1	0x00000020	/* Data BP invert		*/
+#define MCFDEBUG_TDR_DI2	0x00200000
+#define MCFDEBUG_TDR_EAI1	0x00000010	/* Enable address BP inverted	*/
+#define MCFDEBUG_TDR_EAI2	0x00100000
+#define MCFDEBUG_TDR_EAR1	0x00000008	/* Enable address BP range	*/
+#define MCFDEBUG_TDR_EAR2	0x00080000
+#define MCFDEBUG_TDR_EAL1	0x00000004	/* Enable address BP low	*/
+#define MCFDEBUG_TDR_EAL2	0x00040000
+#define MCFDEBUG_TDR_EPC1	0x00000002	/* Enable PC BP			*/
+#define MCFDEBUG_TDR_EPC2	0x00020000
+#define MCFDEBUG_TDR_PCI1	0x00000001	/* PC BP invert			*/
+#define MCFDEBUG_TDR_PCI2	0x00010000
+
+/* Constants for the address attribute trigger register */
+#define MCFDEBUG_AAR_RESET	0x00000005
+/* Fields not yet implemented */
+
+/* And some definitions for the writable sections of the CSR */
+#define MCFDEBUG_CSR_RESET	0x00100000
+#define MCFDEBUG_CSR_PSTCLK	0x00020000	/* PSTCLK disable		*/
+#define MCFDEBUG_CSR_IPW	0x00010000	/* Inhibit processor writes	*/
+#define MCFDEBUG_CSR_MAP	0x00008000	/* Processor refs in emul mode	*/
+#define MCFDEBUG_CSR_TRC	0x00004000	/* Emul mode on trace exception	*/
+#define MCFDEBUG_CSR_EMU	0x00002000	/* Force emulation mode		*/
+#define MCFDEBUG_CSR_DDC_READ	0x00000800	/* Debug data control		*/
+#define MCFDEBUG_CSR_DDC_WRITE	0x00001000
+#define MCFDEBUG_CSR_UHE	0x00000400	/* User mode halt enable	*/
+#define MCFDEBUG_CSR_BTB0	0x00000000	/* Branch target 0 bytes	*/
+#define MCFDEBUG_CSR_BTB2	0x00000100	/* Branch target 2 bytes	*/
+#define MCFDEBUG_CSR_BTB3	0x00000200	/* Branch target 3 bytes	*/
+#define MCFDEBUG_CSR_BTB4	0x00000300	/* Branch target 4 bytes	*/
+#define MCFDEBUG_CSR_NPL	0x00000040	/* Non-pipelined mode		*/
+#define MCFDEBUG_CSR_SSM	0x00000010	/* Single step mode		*/
+
+/* Constants for the BDM address attribute register */
+#define MCFDEBUG_BAAR_RESET	0x00000005
+/* Fields not yet implemented */
+
+
+/* This routine wrappers up the wdebug asm instruction so that the register
+ * and value can be relatively easily specified.  The biggest hassle here is
+ * that the debug module instructions (2 longs) must be long word aligned and
+ * some pointer fiddling is performed to ensure this.
+ */
+extern inline void wdebug(int reg, unsigned long data) {
+	unsigned short dbg_spc[6];
+	unsigned short *dbg;
+
+	// Force alignment to long word boundary
+	dbg = (unsigned short *)((((unsigned long)dbg_spc) + 3) & 0xfffffffc);
+
+	// Build up the debug instruction
+	dbg[0] = 0x2c80 | (reg & 0xf);
+	dbg[1] = (data >> 16) & 0xffff;
+	dbg[2] = data & 0xffff;
+	dbg[3] = 0;
+
+	// Perform the wdebug instruction
+#if 0
+	// This strain is for gas which doesn't have the wdebug instructions defined
+	asm(	"move.l	%0, %%a0\n\t"
+		".word	0xfbd0\n\t"
+		".word	0x0003\n\t"
+	    :: "g" (dbg) : "a0");
+#else
+	// And this is for when it does
+	asm(	"wdebug	(%0)" :: "a" (dbg));
+#endif
+}
+
+#endif

include/asm-m68knommu/md.h

@@ -0,0 +1 @@
+#include <asm-m68k/md.h>

include/asm-m68knommu/mman.h

@@ -0,0 +1 @@
+#include <asm-m68k/mman.h>

include/asm-m68knommu/mmu.h

@@ -0,0 +1,11 @@
+#ifndef __M68KNOMMU_MMU_H
+#define __M68KNOMMU_MMU_H
+
+/* Copyright (C) 2002, David McCullough <[email protected]> */
+
+typedef struct {
+	struct vm_list_struct	*vmlist;
+	unsigned long		end_brk;
+} mm_context_t;
+
+#endif /* __M68KNOMMU_MMU_H */

include/asm-m68knommu/mmu_context.h

@@ -0,0 +1,33 @@
+#ifndef __M68KNOMMU_MMU_CONTEXT_H
+#define __M68KNOMMU_MMU_CONTEXT_H
+
+#include <linux/config.h>
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+extern inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	// mm->context = virt_to_phys(mm->pgd);
+	return(0);
+}
+
+#define destroy_context(mm)		do { } while(0)
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
+{
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+extern inline void activate_mm(struct mm_struct *prev_mm,
+			       struct mm_struct *next_mm)
+{
+}
+
+#endif

include/asm-m68knommu/module.h

@@ -0,0 +1 @@
+#include <asm-m68k/module.h>

include/asm-m68knommu/movs.h

@@ -0,0 +1 @@
+#include <asm-m68k/movs.h>

include/asm-m68knommu/msgbuf.h

@@ -0,0 +1 @@
+#include <asm-m68k/msgbuf.h>

include/asm-m68knommu/namei.h

@@ -0,0 +1 @@
+#include <asm-m68k/namei.h>

include/asm-m68knommu/nettel.h

@@ -0,0 +1,109 @@
+/****************************************************************************/
+
+/*
+ *	nettel.h -- Lineo (formerly Moreton Bay) NETtel support.
+ *
+ *	(C) Copyright 1999-2000, Moreton Bay (www.moretonbay.com)
+ * 	(C) Copyright 2000-2001, Lineo Inc. (www.lineo.com) 
+ * 	(C) Copyright 2001-2002, SnapGear Inc., (www.snapgear.com) 
+ */
+
+/****************************************************************************/
+#ifndef	nettel_h
+#define	nettel_h
+/****************************************************************************/
+
+#include <linux/config.h>
+
+/****************************************************************************/
+#ifdef CONFIG_NETtel
+/****************************************************************************/
+
+#ifdef CONFIG_COLDFIRE
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#endif
+
+/*---------------------------------------------------------------------------*/
+#if defined(CONFIG_M5307)
+/*
+ *	NETtel/5307 based hardware first. DTR/DCD lines are wired to
+ *	GPIO lines. Most of the LED's are driver through a latch
+ *	connected to CS2.
+ */
+#define	MCFPP_DCD1	0x0001
+#define	MCFPP_DCD0	0x0002
+#define	MCFPP_DTR1	0x0004
+#define	MCFPP_DTR0	0x0008
+
+#define	NETtel_LEDADDR	0x30400000
+
+#ifndef __ASSEMBLY__
+
+extern volatile unsigned short ppdata;
+
+/*
+ *	These functions defined to give quasi generic access to the
+ *	PPIO bits used for DTR/DCD.
+ */
+static __inline__ unsigned int mcf_getppdata(void)
+{
+	volatile unsigned short *pp;
+	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT);
+	return((unsigned int) *pp);
+}
+
+static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
+{
+	volatile unsigned short *pp;
+	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT);
+	ppdata = (ppdata & ~mask) | bits;
+	*pp = ppdata;
+}
+#endif
+
+/*---------------------------------------------------------------------------*/
+#elif defined(CONFIG_M5206e)
+/*
+ *	NETtel/5206e based hardware has leds on latch on CS3.
+ *	No support modem for lines??
+ */
+#define	NETtel_LEDADDR	0x50000000
+
+/*---------------------------------------------------------------------------*/
+#elif defined(CONFIG_M5272)
+/*
+ *	NETtel/5272 based hardware. DTR/DCD lines are wired to GPB lines.
+ */
+#define	MCFPP_DCD0	0x0080
+#define	MCFPP_DCD1	0x0000		/* Port 1 no DCD support */
+#define	MCFPP_DTR0	0x0040
+#define	MCFPP_DTR1	0x0000		/* Port 1 no DTR support */
+
+#ifndef __ASSEMBLY__
+/*
+ *	These functions defined to give quasi generic access to the
+ *	PPIO bits used for DTR/DCD.
+ */
+static __inline__ unsigned int mcf_getppdata(void)
+{
+	volatile unsigned short *pp;
+	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT);
+	return((unsigned int) *pp);
+}
+
+static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
+{
+	volatile unsigned short *pp;
+	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT);
+	*pp = (*pp & ~mask) | bits;
+}
+#endif
+
+#endif
+/*---------------------------------------------------------------------------*/
+
+/****************************************************************************/
+#endif /* CONFIG_NETtel */
+/****************************************************************************/
+#endif	/* nettel_h */

include/asm-m68knommu/openprom.h

@@ -0,0 +1 @@
+#include <asm-m68k/openprom.h>

include/asm-m68knommu/oplib.h

@@ -0,0 +1 @@
+#include <asm-m68k/oplib.h>

include/asm-m68knommu/page.h

@@ -0,0 +1,95 @@
+#ifndef _M68KNOMMU_PAGE_H
+#define _M68KNOMMU_PAGE_H
+
+#include <linux/config.h>
+
+/* PAGE_SHIFT determines the page size */
+
+#define PAGE_SHIFT	(12)
+#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+
+#ifdef __KERNEL__
+
+#include <asm/setup.h>
+
+#ifndef __ASSEMBLY__
+ 
+#define get_user_page(vaddr)		__get_free_page(GFP_KERNEL)
+#define free_user_page(page, addr)	free_page(addr)
+
+#define clear_page(page)	memset((page), 0, PAGE_SIZE)
+#define copy_page(to,from)	memcpy((to), (from), PAGE_SIZE)
+
+#define clear_user_page(page, vaddr, pg)	clear_page(page)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+
+#define alloc_zeroed_user_highpage(vma, vaddr) alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO, vma, vaddr)
+#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pmd[16]; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pte_val(x)	((x).pte)
+#define pmd_val(x)	((&x)->pmd[0])
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x)	((pte_t) { (x) } )
+#define __pmd(x)	((pmd_t) { (x) } )
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr)	(((addr)+PAGE_SIZE-1)&PAGE_MASK)
+
+/* Pure 2^n version of get_order */
+extern __inline__ int get_order(unsigned long size)
+{
+	int order;
+
+	size = (size-1) >> (PAGE_SHIFT-1);
+	order = -1;
+	do {
+		size >>= 1;
+		order++;
+	} while (size);
+	return order;
+}
+
+extern unsigned long memory_start;
+extern unsigned long memory_end;
+
+#endif /* !__ASSEMBLY__ */
+
+#include <asm/page_offset.h>
+
+#define PAGE_OFFSET		(PAGE_OFFSET_RAW)
+
+#ifndef __ASSEMBLY__
+
+#define __pa(vaddr)		virt_to_phys((void *)vaddr)
+#define __va(paddr)		phys_to_virt((unsigned long)paddr)
+
+#define virt_to_pfn(kaddr)	(__pa(kaddr) >> PAGE_SHIFT)
+#define pfn_to_virt(pfn)	__va((pfn) << PAGE_SHIFT)
+
+#define virt_to_page(addr)	(mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
+#define page_to_virt(page)	((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
+
+#define pfn_to_page(pfn)	virt_to_page(pfn_to_virt(pfn))
+#define page_to_pfn(page)	virt_to_pfn(page_to_virt(page))
+
+#define	virt_addr_valid(kaddr)	(((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
+				((void *)(kaddr) < (void *)memory_end))
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68KNOMMU_PAGE_H */

include/asm-m68knommu/page_offset.h

@@ -0,0 +1,47 @@
+
+#include <linux/config.h>
+
+/* This handles the memory map.. */
+
+#ifdef CONFIG_COLDFIRE
+#if defined(CONFIG_SMALL)
+#define PAGE_OFFSET_RAW		0x30020000
+#elif defined(CONFIG_CFV240)
+#define PAGE_OFFSET_RAW		0x02000000
+#else
+#define PAGE_OFFSET_RAW		0x00000000
+#endif
+#endif
+
+#ifdef CONFIG_M68360
+#define PAGE_OFFSET_RAW     0x00000000
+#endif
+
+#ifdef CONFIG_PILOT
+#ifdef CONFIG_M68328
+#define PAGE_OFFSET_RAW		0x10000000
+#endif
+#ifdef CONFIG_M68EZ328
+#define PAGE_OFFSET_RAW		0x00000000
+#endif
+#endif
+#ifdef CONFIG_UCSIMM
+#define PAGE_OFFSET_RAW		0x00000000
+#endif
+
+#if defined(CONFIG_UCDIMM) || defined(CONFIG_DRAGEN2)
+#ifdef CONFIG_M68VZ328 
+#define PAGE_OFFSET_RAW		0x00000000
+#endif /* CONFIG_M68VZ328 */
+#endif /* CONFIG_UCDIMM */
+
+#ifdef CONFIG_M68EZ328ADS
+#define PAGE_OFFSET_RAW		0x00000000
+#endif
+#ifdef CONFIG_ALMA_ANS
+#define PAGE_OFFSET_RAW		0x00000000
+#endif
+#ifdef CONFIG_M68EN302
+#define PAGE_OFFSET_RAW		0x00000000
+#endif
+

include/asm-m68knommu/param.h

@@ -0,0 +1,26 @@
+#ifndef _M68KNOMMU_PARAM_H
+#define _M68KNOMMU_PARAM_H
+
+#include <linux/config.h>
+
+#if defined(CONFIG_CLEOPATRA)
+#define	HZ 1000
+#endif
+#ifndef HZ
+#define	HZ 100
+#endif
+
+#ifdef __KERNEL__
+#define	USER_HZ		HZ
+#define	CLOCKS_PER_SEC	(USER_HZ)
+#endif
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif /* _M68KNOMMU_PARAM_H */

include/asm-m68knommu/pci.h

@@ -0,0 +1,39 @@
+#ifndef M68KNOMMU_PCI_H
+#define	M68KNOMMU_PCI_H
+
+#include <asm-m68k/pci.h>
+
+#ifdef CONFIG_COMEMPCI
+/*
+ *	These are pretty much arbitary with the CoMEM implementation.
+ *	We have the whole address space to ourselves.
+ */
+#define PCIBIOS_MIN_IO		0x100
+#define PCIBIOS_MIN_MEM		0x00010000
+
+#define pcibios_scan_all_fns(a, b)	0
+
+/*
+ * Return whether the given PCI device DMA address mask can
+ * be supported properly.  For example, if your device can
+ * only drive the low 24-bits during PCI bus mastering, then
+ * you would pass 0x00ffffff as the mask to this function.
+ */
+static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask)
+{
+	return 1;
+}
+
+/*
+ * Not supporting more than 32-bit PCI bus addresses now, but
+ * must satisfy references to this function.  Change if needed.
+ */
+#define pci_dac_dma_supported(pci_dev, mask) (0)
+
+static inline void pcibios_add_platform_entries(struct pci_dev *dev)
+{
+}
+
+#endif /* CONFIG_COMEMPCI */
+
+#endif /* M68KNOMMU_PCI_H */

include/asm-m68knommu/percpu.h

@@ -0,0 +1,6 @@
+#ifndef __ARCH_M68KNOMMU_PERCPU__
+#define __ARCH_M68KNOMMU_PERCPU__
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ARCH_M68KNOMMU_PERCPU__ */

include/asm-m68knommu/pgalloc.h

@@ -0,0 +1,8 @@
+#ifndef _M68KNOMMU_PGALLOC_H
+#define _M68KNOMMU_PGALLOC_H
+
+#include <asm/setup.h>
+
+#define check_pgt_cache()	do { } while (0)
+
+#endif /* _M68KNOMMU_PGALLOC_H */

include/asm-m68knommu/pgtable.h

@@ -0,0 +1,76 @@
+#ifndef _M68KNOMMU_PGTABLE_H
+#define _M68KNOMMU_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+/*
+ * (C) Copyright 2000-2002, Greg Ungerer <gerg@snapgear.com>
+ */
+
+#include <linux/config.h>
+#include <linux/slab.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/io.h>
+
+/*
+ * Trivial page table functions.
+ */
+#define pgd_present(pgd)	(1)
+#define pgd_none(pgd)		(0)
+#define pgd_bad(pgd)		(0)
+#define pgd_clear(pgdp)
+#define kern_addr_valid(addr)	(1)
+#define	pmd_offset(a, b)	((void *)0)
+
+#define PAGE_NONE	__pgprot(0)
+#define PAGE_SHARED	__pgprot(0)
+#define PAGE_COPY	__pgprot(0)
+#define PAGE_READONLY	__pgprot(0)
+#define PAGE_KERNEL	__pgprot(0)
+
+extern void paging_init(void);
+#define swapper_pg_dir ((pgd_t *) 0)
+
+#define __swp_type(x)		(0)
+#define __swp_offset(x)		(0)
+#define __swp_entry(typ,off)	((swp_entry_t) { ((typ) | ((off) << 7)) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+
+static inline int pte_file(pte_t pte) { return 0; }
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr)	(virt_to_page(0))
+
+/*
+ * These would be in other places but having them here reduces the diffs.
+ */
+extern unsigned int kobjsize(const void *objp);
+extern int is_in_rom(unsigned long);
+
+/*
+ * No page table caches to initialise.
+ */
+#define pgtable_cache_init()	do { } while (0)
+#define io_remap_page_range(vma, vaddr, paddr, size, prot)		\
+		remap_pfn_range(vma, vaddr, (paddr) >> PAGE_SHIFT, size, prot)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#define MK_IOSPACE_PFN(space, pfn)	(pfn)
+#define GET_IOSPACE(pfn)		0
+#define GET_PFN(pfn)			(pfn)
+
+/*
+ * All 32bit addresses are effectively valid for vmalloc...
+ * Sort of meaningless for non-VM targets.
+ */
+#define	VMALLOC_START	0
+#define	VMALLOC_END	0xffffffff
+
+#endif /* _M68KNOMMU_PGTABLE_H */

include/asm-m68knommu/poll.h

@@ -0,0 +1 @@
+#include <asm-m68k/poll.h>

include/asm-m68knommu/posix_types.h

@@ -0,0 +1 @@
+#include <asm-m68k/posix_types.h>

include/asm-m68knommu/processor.h

@@ -0,0 +1,131 @@
+/*
+ * include/asm-m68k/processor.h
+ *
+ * Copyright (C) 1995 Hamish Macdonald
+ */
+
+#ifndef __ASM_M68K_PROCESSOR_H
+#define __ASM_M68K_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <asm/types.h>
+#include <asm/segment.h>
+#include <asm/fpu.h>
+#include <asm/ptrace.h>
+#include <asm/current.h>
+
+extern inline unsigned long rdusp(void)
+{
+#ifdef CONFIG_COLDFIRE
+	extern unsigned int sw_usp;
+	return(sw_usp);
+#else
+  	unsigned long usp;
+	__asm__ __volatile__("move %/usp,%0" : "=a" (usp));
+	return usp;
+#endif
+}
+
+extern inline void wrusp(unsigned long usp)
+{
+#ifdef CONFIG_COLDFIRE
+	extern unsigned int sw_usp;
+	sw_usp = usp;
+#else
+	__asm__ __volatile__("move %0,%/usp" : : "a" (usp));
+#endif
+}
+
+/*
+ * User space process size: 3.75GB. This is hardcoded into a few places,
+ * so don't change it unless you know what you are doing.
+ */
+#define TASK_SIZE	(0xF0000000UL)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's. We won't be using it
+ */
+#define TASK_UNMAPPED_BASE	0
+
+/* 
+ * if you change this structure, you must change the code and offsets
+ * in m68k/machasm.S
+ */
+   
+struct thread_struct {
+	unsigned long  ksp;		/* kernel stack pointer */
+	unsigned long  usp;		/* user stack pointer */
+	unsigned short sr;		/* saved status register */
+	unsigned short fs;		/* saved fs (sfc, dfc) */
+	unsigned long  crp[2];		/* cpu root pointer */
+	unsigned long  esp0;		/* points to SR of stack frame */
+	unsigned long  fp[8*3];
+	unsigned long  fpcntl[3];	/* fp control regs */
+	unsigned char  fpstate[FPSTATESIZE];  /* floating point state */
+};
+
+#define INIT_THREAD  { \
+	sizeof(init_stack) + (unsigned long) init_stack, 0, \
+	PS_S, __KERNEL_DS, \
+	{0, 0}, 0, {0,}, {0, 0, 0}, {0,}, \
+}
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ *
+ * pass the data segment into user programs if it exists,
+ * it can't hurt anything as far as I can tell
+ */
+#define start_thread(_regs, _pc, _usp)           \
+do {                                             \
+	set_fs(USER_DS); /* reads from user space */ \
+	(_regs)->pc = (_pc);                         \
+	if (current->mm)                             \
+		(_regs)->d5 = current->mm->start_data;   \
+	(_regs)->sr &= ~0x2000;                      \
+	wrusp(_usp);                                 \
+} while(0)
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+static inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/*
+ * Free current thread data structures etc..
+ */
+static inline void exit_thread(void)
+{
+}
+
+unsigned long thread_saved_pc(struct task_struct *tsk);
+unsigned long get_wchan(struct task_struct *p);
+
+#define	KSTK_EIP(tsk)	\
+    ({			\
+	unsigned long eip = 0;	 \
+	if ((tsk)->thread.esp0 > PAGE_SIZE && \
+	    (virt_addr_valid((tsk)->thread.esp0))) \
+	      eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
+	eip; })
+#define	KSTK_ESP(tsk)	((tsk) == current ? rdusp() : (tsk)->thread.usp)
+
+#define cpu_relax()    do { } while (0)
+
+#endif

include/asm-m68knommu/ptrace.h

@@ -0,0 +1,91 @@
+#ifndef _M68K_PTRACE_H
+#define _M68K_PTRACE_H
+
+#define PT_D1	   0
+#define PT_D2	   1
+#define PT_D3	   2
+#define PT_D4	   3
+#define PT_D5	   4
+#define PT_D6	   5
+#define PT_D7	   6
+#define PT_A0	   7
+#define PT_A1	   8
+#define PT_A2	   9
+#define PT_A3	   10
+#define PT_A4	   11
+#define PT_A5	   12
+#define PT_A6	   13
+#define PT_D0	   14
+#define PT_USP	   15
+#define PT_ORIG_D0 16
+#define PT_SR	   17
+#define PT_PC	   18
+
+#ifndef __ASSEMBLY__
+
+/* this struct defines the way the registers are stored on the
+   stack during a system call. */
+
+struct pt_regs {
+  long     d1;
+  long     d2;
+  long     d3;
+  long     d4;
+  long     d5;
+  long     a0;
+  long     a1;
+  long     a2;
+  long     d0;
+  long     orig_d0;
+  long     stkadj;
+#ifdef CONFIG_COLDFIRE
+  unsigned format :  4; /* frame format specifier */
+  unsigned vector : 12; /* vector offset */
+  unsigned short sr;
+  unsigned long  pc;
+#else
+  unsigned short sr;
+  unsigned long  pc;
+#ifndef NO_FORMAT_VEC
+  unsigned format :  4; /* frame format specifier */
+  unsigned vector : 12; /* vector offset */
+#endif
+#endif
+};
+
+/*
+ * This is the extended stack used by signal handlers and the context
+ * switcher: it's pushed after the normal "struct pt_regs".
+ */
+struct switch_stack {
+	unsigned long  d6;
+	unsigned long  d7;
+	unsigned long  a3;
+	unsigned long  a4;
+	unsigned long  a5;
+	unsigned long  a6;
+	unsigned long  retpc;
+};
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#ifdef COFNIG_FPU
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+#endif
+
+#ifdef __KERNEL__
+
+#ifndef PS_S
+#define PS_S  (0x2000)
+#define PS_M  (0x1000)
+#endif
+
+#define user_mode(regs) (!((regs)->sr & PS_S))
+#define instruction_pointer(regs) ((regs)->pc)
+#define profile_pc(regs) instruction_pointer(regs)
+extern void show_regs(struct pt_regs *);
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+#endif /* _M68K_PTRACE_H */

include/asm-m68knommu/quicc_simple.h

@@ -0,0 +1,52 @@
+/***********************************
+ * $Id: quicc_simple.h,v 1.1 2002/03/02 15:01:10 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Simple drivers common header
+ ***************************************
+ */
+
+#ifndef __SIMPLE_H
+#define __SIMPLE_H
+
+/* #include "quicc.h" */
+
+#define GLB_SCC_0   0
+#define GLB_SCC_1   1
+#define GLB_SCC_2   2
+#define GLB_SCC_3   3
+
+typedef void (int_routine)(unsigned short interrupt_event);
+typedef int_routine *int_routine_ptr; 
+typedef void *(alloc_routine)(int length);
+typedef void (free_routine)(int scc_num, int channel_num, void *buf);
+typedef void (store_rx_buffer_routine)(int scc_num, int channel_num, void *buff, int length);
+typedef int  (handle_tx_error_routine)(int scc_num, int channel_num, QUICC_BD *tbd);
+typedef void (handle_rx_error_routine)(int scc_num, int channel_num, QUICC_BD *rbd);
+typedef void (handle_lost_error_routine)(int scc_num, int channel_num);
+
+/* user defined functions for global errors */
+typedef void (handle_glob_overrun_routine)(int scc_number);
+typedef void (handle_glob_underrun_routine)(int scc_number);
+typedef void (glob_intr_q_overflow_routine)(int scc_number);
+
+/*
+ * General initialization and command routines
+ */
+void quicc_issue_cmd (unsigned short cmd, int scc_num);
+void quicc_init(void);
+void quicc_scc_init(int scc_number, int number_of_rx_buf, int number_of_tx_buf);
+void quicc_smc_init(int smc_number, int number_of_rx_buf, int number_of_tx_buf);
+void quicc_scc_start(int scc_num);
+void quicc_scc_loopback(int scc_num);
+
+/* Interrupt enable/disable routines for critical pieces of code*/
+unsigned short  IntrDis(void);
+void            IntrEna(unsigned short old_sr);
+
+/* For debugging */
+void print_rbd(int scc_num);
+void print_tbd(int scc_num);
+
+#endif

include/asm-m68knommu/resource.h

@@ -0,0 +1 @@
+#include <asm-m68k/resource.h>

include/asm-m68knommu/scatterlist.h

@@ -0,0 +1,13 @@
+#ifndef _M68KNOMMU_SCATTERLIST_H
+#define _M68KNOMMU_SCATTERLIST_H
+
+struct scatterlist {
+	struct page	*page;
+	unsigned int	offset;
+	dma_addr_t	dma_address;
+	unsigned int	length;
+};
+
+#define ISA_DMA_THRESHOLD	(0xffffffff)
+
+#endif /* !(_M68KNOMMU_SCATTERLIST_H) */

include/asm-m68knommu/sections.h

@@ -0,0 +1,7 @@
+#ifndef _M68KNOMMU_SECTIONS_H
+#define _M68KNOMMU_SECTIONS_H
+
+/* nothing to see, move along */
+#include <asm-generic/sections.h>
+
+#endif

include/asm-m68knommu/segment.h

@@ -0,0 +1,51 @@
+#ifndef _M68K_SEGMENT_H
+#define _M68K_SEGMENT_H
+
+/* define constants */
+/* Address spaces (FC0-FC2) */
+#define USER_DATA     (1)
+#ifndef __USER_DS
+#define __USER_DS     (USER_DATA)
+#endif
+#define USER_PROGRAM  (2)
+#define SUPER_DATA    (5)
+#ifndef __KERNEL_DS
+#define __KERNEL_DS   (SUPER_DATA)
+#endif
+#define SUPER_PROGRAM (6)
+#define CPU_SPACE     (7)
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
+#define USER_DS		MAKE_MM_SEG(__USER_DS)
+#define KERNEL_DS	MAKE_MM_SEG(__KERNEL_DS)
+
+/*
+ * Get/set the SFC/DFC registers for MOVES instructions
+ */
+
+static inline mm_segment_t get_fs(void)
+{
+    return USER_DS;
+}
+
+static inline mm_segment_t get_ds(void)
+{
+    /* return the supervisor data space code */
+    return KERNEL_DS;
+}
+
+static inline void set_fs(mm_segment_t val)
+{
+}
+
+#define segment_eq(a,b)	((a).seg == (b).seg)
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _M68K_SEGMENT_H */