qcacld-3.0: CL 1470160 - update fw common interface files

Propagation from qcacld-2.0 to qcacld-3.0.

Periodic channel stats and WMI chan info extension
Define a flag which indicates the packet responsible
for wake up the host from suspend mode

Change-Id: Ieb5f47f16c5f55790511e02d97db57f4fdf6de97
CRs-Fixed: 865207
This commit is contained in:
Sandeep Puligilla 2016-04-16 13:34:09 +05:30 • committed by Gerrit - the friendly Code Review server
commit 1dbd750c8c
4 changed files with 37 additions and 4 deletions

View file

@ -162,7 +162,7 @@ typedef enum {
WMI_SERVICE_DEPRECATED_REPLACE,
WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, /* FW supports a new mode that allows to run connection tracker in host */
WMI_SERVICE_ENHANCED_MCAST_FILTER,/* FW supports enhanced multicast filtering (of mcast IP inside ucast WLAN) */
WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, /* periodic channel stats service */
WMI_MAX_SERVICE = 128 /* max service */
} WMI_SERVICE;

View file

@ -690,6 +690,7 @@ typedef enum {
WMITLV_TAG_STRUC_WMI_COEX_CONFIG_CMD_fixed_param,
WMITLV_TAG_STRUC_wmi_config_enhanced_mcast_filter_fixed_param,
WMITLV_TAG_STRUC_WMI_CHAN_AVOID_RPT_ALLOW_CMD_fixed_param,
WMITLV_TAG_STRUC_wmi_set_periodic_channel_stats_config_fixed_param,
} WMITLV_TAG_ID;
/*
@ -968,7 +969,8 @@ typedef enum {
OP(WMI_VDEV_SET_QUIET_MODE_CMDID) \
OP(WMI_COEX_CONFIG_CMDID) \
OP(WMI_CONFIG_ENHANCED_MCAST_FILTER_CMDID) \
OP(WMI_CHAN_AVOID_RPT_ALLOW_CMDID)
OP(WMI_CHAN_AVOID_RPT_ALLOW_CMDID) \
OP(WMI_SET_PERIODIC_CHANNEL_STATS_CONFIG_CMDID)
/*
* IMPORTANT: Please add _ALL_ WMI Events Here.
@ -2777,6 +2779,11 @@ WMITLV_CREATE_PARAM_STRUC(WMI_SOC_SET_ANTENNA_MODE_CMDID);
WMITLV_ELEM(id, op, buf, len, WMITLV_TAG_STRUC_wmi_pdev_set_antenna_mode_cmd_fixed_param, wmi_pdev_set_antenna_mode_cmd_fixed_param, fixed_param, WMITLV_SIZE_FIX)
WMITLV_CREATE_PARAM_STRUC(WMI_PDEV_SET_ANTENNA_MODE_CMDID);
/* enable/disable and set the periodicity of periodic channel stats */
#define WMITLV_TABLE_WMI_SET_PERIODIC_CHANNEL_STATS_CONFIG_CMDID(id, op, buf, len) \
WMITLV_ELEM(id, op, buf, len, WMITLV_TAG_STRUC_wmi_set_periodic_channel_stats_config_fixed_param, wmi_set_periodic_channel_stats_config_fixed_param, fixed_param, WMITLV_SIZE_FIX)
WMITLV_CREATE_PARAM_STRUC(WMI_SET_PERIODIC_CHANNEL_STATS_CONFIG_CMDID);
/************************** TLV definitions of WMI events *******************************/
/* Service Ready event */

View file

@ -337,6 +337,8 @@ typedef enum {
WMI_PDEV_SET_MAC_CONFIG_CMDID,
/** Set per band and per pdev antenna chains */
WMI_PDEV_SET_ANTENNA_MODE_CMDID,
/** Periodic channel stats request command */
WMI_SET_PERIODIC_CHANNEL_STATS_CONFIG_CMDID,
/* VDEV(virtual device) specific commands */
/** vdev create */
@ -6719,7 +6721,11 @@ typedef struct {
/** channel tx power per throughput */
A_UINT32 chan_tx_pwr_tp;
/** rx frame count (cumulative) */
A_UINT32 rx_frame_count;
A_UINT32 rx_frame_count;
/** BSS rx cycle count */
A_UINT32 my_bss_rx_cycle_count;
/** b-mode data rx time (units are microseconds) */
A_UINT32 rx_11b_mode_data_duration;
} wmi_chan_info_event_fixed_param;
/**
@ -6791,7 +6797,11 @@ typedef struct _wlan_dcs_im_tgt_stats {
/** CCK phy error count, MAC_PCU_PHY_ERR_CNT_2_ADDRESS */
A_UINT32 reg_cck_phyerr_cnt; /* CCK err count since last reset, read from register */
/** Channel noise floor (units are dBm) */
A_INT32 chan_nf;
/** BSS rx cycle count */
A_UINT32 my_bss_rx_cycle_count;
} wlan_dcs_im_tgt_stats_t;
/**
@ -15073,6 +15083,22 @@ typedef struct {
A_UINT32 rpt_allow;
} WMI_CHAN_AVOID_RPT_ALLOW_CMD_fixed_param;
/*
* Periodic channel stats WMI command structure
* WMI_SET_PERIODIC_CHANNEL_STATS_CONFIG_CMDID
*/
typedef struct {
/*
* TLV tag and len; tag equals
* WMITLV_TAG_STRUC_wmi_set_periodic_channel_stats_config_fixed_param
*/
A_UINT32 tlv_header;
/** 1 = enable, 0 = disable */
A_UINT32 enable;
/** periodic stats duration (units are milliseconds) */
A_UINT32 stats_period;
} wmi_set_periodic_channel_stats_config_fixed_param;
/* ADD NEW DEFS HERE */
/*****************************************************************************

View file

@ -36,7 +36,7 @@
#define __WMI_VER_MINOR_ 0
/** WMI revision number has to be incremented when there is a
* change that may or may not break compatibility */
#define __WMI_REVISION_ 218
#define __WMI_REVISION_ 219
/** The Version Namespace should not be normally changed. Only
* host and firmware of the same WMI namespace will work