diff --git a/bindings/power/reset/qcom,dload-mode.yaml b/bindings/power/reset/qcom,dload-mode.yaml
index 067d6eb2b032..ce65735c956b 100644
--- a/bindings/power/reset/qcom,dload-mode.yaml
+++ b/bindings/power/reset/qcom,dload-mode.yaml
@@ -16,6 +16,18 @@ properties:
   compatible:
     items:
       - const: qcom,dload-mode
+  reg:
+    Value type: <prop-encoded-array>
+    Definition: The base address and size for reading the proper configuration
+                related information.
+
+  reg-names:
+    Value type: string
+    Definition: The reg name for reading the configurations.
+
+  qcom,boot-config-shift:
+    Value type: <prop-encoded-array>
+    Definition: The range of bits from low to high.
 
 required:
   - compatible
diff --git a/qcom/blair-pinctrl.dtsi b/qcom/blair-pinctrl.dtsi
index 1302fa7d9dec..56d861ad5b31 100644
--- a/qcom/blair-pinctrl.dtsi
+++ b/qcom/blair-pinctrl.dtsi
@@ -337,7 +337,7 @@
 			qupv3_se7_i2c_active: qupv3_se7_i2c_active {
 				mux {
 					pins = "gpio27", "gpio28";
-					function = "qup11";
+					function = "qup11_f1";
 				};
 
 				config {
diff --git a/qcom/sdxlemur-qcn9000.dtsi b/qcom/sdxlemur-qcn9000.dtsi
index 48709022c247..d3ec2dcd34c0 100644
--- a/qcom/sdxlemur-qcn9000.dtsi
+++ b/qcom/sdxlemur-qcn9000.dtsi
@@ -24,6 +24,11 @@
 };
 
 &soc {
+	/* If QCN9000 is connected, LPM modes are disabled */
+	qcom,lpm-levels {
+		status = "disabled";
+	};
+
 	wifi0: qcom,cnss-qcn9000@a0000000 {
 		status = "disabled";
 		compatible = "qcom,cnss-qcn9000";
diff --git a/qcom/sdxlemur-v2.dtsi b/qcom/sdxlemur-v2.dtsi
index f2cadc6e4814..2d9f76145127 100644
--- a/qcom/sdxlemur-v2.dtsi
+++ b/qcom/sdxlemur-v2.dtsi
@@ -173,3 +173,8 @@
 &pil_modem {
 	qcom,vdd_mss-uV-uA = <RPMH_REGULATOR_LEVEL_NOM_L1 100000>;
 };
+
+
+&dload_mode {
+	qcom,boot-config-shift = <1 4>;
+};
diff --git a/qcom/sdxlemur.dtsi b/qcom/sdxlemur.dtsi
index b1e720c7677b..3ffb3e2dd6f1 100644
--- a/qcom/sdxlemur.dtsi
+++ b/qcom/sdxlemur.dtsi
@@ -196,8 +196,11 @@
 		};
 	};
 
-	dload_mode {
+	dload_mode: dload_mode {
 		compatible = "qcom,dload-mode";
+		reg = <0x786070 0x4>;
+		reg-names = "boot-config";
+		qcom,boot-config-shift = <1 3>;
 	};
 
 	dcc: dcc_v2@117f000 {
@@ -977,7 +980,7 @@
 
 			qcom,pcie-vendor-id = /bits/ 16 <0x17cb>;
 			qcom,pcie-device-id = /bits/ 16 <0x0308>;
-			qcom,pcie-link-speed = <4>;
+			qcom,pcie-link-speed = <3>;
 			qcom,pcie-phy-ver = <7>;
 			qcom,pcie-active-config;
 			qcom,pcie-aggregated-irq;
@@ -1141,7 +1144,7 @@
 			qcom,mhi-ep-msi = <0>;
 			qcom,mhi-version = <0x1000000>;
 			qcom,use-ipa-software-channel;
-			interrupts = <0 145 0>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "mhi-device-inta";
 			qcom,mhi-ifc-id = <0x030817cb>;
 			qcom,mhi-interrupt;