qcacld-3.0: Vendor cmd to set SW retry threshold value

The following vendor cmd can be used to set the
sw retry threshold per vdev for all AC:

Aggresive:     QCA_WLAN_VENDOR_ATTR_CONFIG_AGG_RETRY
Non-Aggresive: QCA_WLAN_VENDOR_ATTR_CONFIG_NON_AGG_RETRY

Change-Id: I49d88ae1f3f6142d8a420fd92f6f40bf3aad03e6
CRs-Fixed: 2945913

core/hdd/src/wlan_hdd_cfg80211.c

@@ -8162,34 +8162,34 @@ static int hdd_config_non_agg_retry(struct hdd_adapter *adapter,
 				    const struct nlattr *attr)
 {
 	uint8_t retry;
-	int param_id;
 
 	retry = nla_get_u8(attr);
-	retry = retry > CFG_NON_AGG_RETRY_MAX ?
-		CFG_NON_AGG_RETRY_MAX : retry;
-	param_id = WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH;
 
-	return wma_cli_set_command(adapter->vdev_id, param_id,
-				   retry, PDEV_CMD);
+	/* Value less than CFG_AGG_RETRY_MIN has side effect to t-put */
+	retry = (retry > CFG_NON_AGG_RETRY_MAX) ? CFG_NON_AGG_RETRY_MAX :
+		((retry < CFG_NON_AGG_RETRY_MIN) ? CFG_NON_AGG_RETRY_MIN :
+		  retry);
+	hdd_debug("sending Non-Agg Retry Th: %d", retry);
+
+	return sme_set_vdev_sw_retry(adapter->vdev_id, retry,
+				     WMI_VDEV_CUSTOM_SW_RETRY_TYPE_NONAGGR);
 }
 
 static int hdd_config_agg_retry(struct hdd_adapter *adapter,
 				const struct nlattr *attr)
 {
 	uint8_t retry;
-	int param_id;
 
 	retry = nla_get_u8(attr);
-	retry = retry > CFG_AGG_RETRY_MAX ?
-		CFG_AGG_RETRY_MAX : retry;
 
 	/* Value less than CFG_AGG_RETRY_MIN has side effect to t-put */
-	retry = ((retry > 0) && (retry < CFG_AGG_RETRY_MIN)) ?
-		CFG_AGG_RETRY_MIN : retry;
-	param_id = WMI_PDEV_PARAM_AGG_SW_RETRY_TH;
+	retry = (retry > CFG_AGG_RETRY_MAX) ? CFG_AGG_RETRY_MAX :
+		((retry < CFG_AGG_RETRY_MIN) ? CFG_AGG_RETRY_MIN :
+		  retry);
+	hdd_debug("sending Agg Retry Th: %d", retry);
 
-	return wma_cli_set_command(adapter->vdev_id, param_id,
-				   retry, PDEV_CMD);
+	return sme_set_vdev_sw_retry(adapter->vdev_id, retry,
+				     WMI_VDEV_CUSTOM_SW_RETRY_TYPE_AGGR);
 }
 
 static int hdd_config_mgmt_retry(struct hdd_adapter *adapter,

core/hdd/src/wlan_hdd_cfg80211.h

@@ -270,12 +270,13 @@ typedef enum {
 #define WIFI_TDLS_EXTERNAL_CONTROL_SUPPORT	BIT(1)
 #define WIIF_TDLS_OFFCHANNEL_SUPPORT		BIT(2)
 
-#define CFG_NON_AGG_RETRY_MAX                  (31)
-#define CFG_AGG_RETRY_MAX                      (31)
+#define CFG_NON_AGG_RETRY_MAX                  (64)
+#define CFG_AGG_RETRY_MAX                      (64)
 #define CFG_CTRL_RETRY_MAX                     (31)
 #define CFG_PROPAGATION_DELAY_MAX              (63)
 #define CFG_PROPAGATION_DELAY_BASE             (64)
 #define CFG_AGG_RETRY_MIN                      (5)
+#define CFG_NON_AGG_RETRY_MIN                  (5)
 
 #define PCL_CHANNEL_SUPPORT_GO			BIT(0)
 #define PCL_CHANNEL_SUPPORT_CLI			BIT(1)

core/sme/inc/sme_api.h

@@ -4160,6 +4160,19 @@ void sme_chan_to_freq_list(
 			const uint8_t *chan_list,
 			uint32_t chan_list_len);
 
+/**
+ * sme_set_vdev_sw_retry() - set sw retry threshold per vdev
+ * @vdev_id: vdev id
+ * @sw_retry_count: sw retry number
+ * @retry_type: SW vdev retry type
+ *
+ * This function calls WMA api to send the sw retry threshold per vdev.
+ *
+ * Return: QDF_STATUS.
+ */
+QDF_STATUS sme_set_vdev_sw_retry(uint8_t vdev_id, uint8_t sw_retry_count,
+				 wmi_vdev_custom_sw_retry_type_t sw_retry_type);
+
 /**
  * sme_set_roam_config_enable() - Cache roam config status in SME
  * @mac_handle: Opaque handle to the MAC context

core/sme/src/common/sme_api.c

@@ -16847,6 +16847,21 @@ QDF_STATUS sme_register_bcn_recv_pause_ind_cb(mac_handle_t mac_handle,
 }
 #endif
 
+QDF_STATUS sme_set_vdev_sw_retry(uint8_t vdev_id, uint8_t sw_retry_count,
+				 wmi_vdev_custom_sw_retry_type_t sw_retry_type)
+{
+	QDF_STATUS status;
+
+	status = wma_set_vdev_sw_retry_th(vdev_id, sw_retry_count,
+					  sw_retry_type);
+	if (QDF_IS_STATUS_ERROR(status)) {
+		sme_err("Failed to set retry count for vdev: %d", vdev_id);
+		return status;
+	}
+
+	return QDF_STATUS_SUCCESS;
+}
+
 QDF_STATUS sme_set_disconnect_ies(mac_handle_t mac_handle, uint8_t vdev_id,
 				  uint8_t *ie_data, uint16_t ie_len)
 {

core/wma/inc/wma_api.h

@@ -358,6 +358,19 @@ wma_set_tx_rx_aggr_size_per_ac(WMA_HANDLE wma_handle,
 			       struct wlan_mlme_qos *qos_aggr,
 			       wmi_vdev_custom_aggr_type_t aggr_type);
 
+/**
+ * wma_set_sw_retry_threshold() - set sw retry threshold per vdev
+ * @vdev_id: vdev id
+ * @sw_retry_count: sw retry number
+ * @retry_type: SW vdev retry type
+ *
+ * This function sends WMI command to set the sw retry threshold per vdev.
+ *
+ * Return: QDF_STATUS.
+ */
+QDF_STATUS wma_set_vdev_sw_retry_th(uint8_t vdev_id, uint8_t sw_retry_count,
+				    wmi_vdev_custom_sw_retry_type_t retry_type);
+
 /**
  * wma_set_sw_retry_threshold_per_ac() - set sw retry threshold per AC for tx
  * @handle: wma handle

core/wma/src/wma_features.c

@@ -4168,6 +4168,35 @@ static QDF_STATUS wma_set_sw_retry_by_qos(
 	return QDF_STATUS_SUCCESS;
 }
 
+QDF_STATUS wma_set_vdev_sw_retry_th(uint8_t vdev_id, uint8_t sw_retry_count,
+				    wmi_vdev_custom_sw_retry_type_t retry_type)
+{
+	QDF_STATUS status = QDF_STATUS_SUCCESS;
+	tp_wma_handle wma_handle;
+	uint32_t queue_num;
+
+	wma_handle = cds_get_context(QDF_MODULE_ID_WMA);
+	if (!wma_handle)
+		return QDF_STATUS_E_FAILURE;
+
+
+	for (queue_num = 0; queue_num < WMI_AC_MAX; queue_num++) {
+		if (sw_retry_count == 0)
+			continue;
+
+		status = wma_set_sw_retry_by_qos(wma_handle,
+						 vdev_id,
+						 retry_type,
+						 queue_num,
+						 sw_retry_count);
+
+		if (QDF_IS_STATUS_ERROR(status))
+			return status;
+	}
+
+	return QDF_STATUS_SUCCESS;
+}
+
 QDF_STATUS wma_set_sw_retry_threshold_per_ac(WMA_HANDLE handle,
 					     uint8_t vdev_id,
 					     struct wlan_mlme_qos *qos_aggr)