diff --git a/qcom/fogor-sensors.dtsi b/qcom/fogor-sensors.dtsi
index e65a4fbcabe0..bbb376f8a0ab 100755
--- a/qcom/fogor-sensors.dtsi
+++ b/qcom/fogor-sensors.dtsi
@@ -37,6 +37,32 @@
 				bias-no-pull;
 			};
 	};
+
+	sar_int_fogor_default: sar_int_fogor_default {
+			mux {
+				pins = "gpio60";
+				function =  "gpio";
+			};
+			config {
+				pins = "gpio60";
+				num-grp-pins = <1>;
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+	};
+
+	sar_int_fogor_sleep: sar_int_fogor_sleep {
+			mux {
+				pins = "gpio60";
+				function =  "gpio";
+			};
+			config {
+				pins = "gpio60";
+				num-grp-pins = <1>;
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+	};
 };
 
 &soc {
@@ -49,104 +75,83 @@
 	};
 };
 
-&qupv3_se8_i2c {
-	status = "disabled";
-	Semtech_sx937x@2c {
-			compatible = "Semtech,sx937x";
-			reg = <0x2c>;
-			Semtech,power-supply-type = <1>;
-			cap_vdd-supply = <&L12A>;
-			/*use PH5/6 as the reference sensor
-			set it to 0xff if the ref-phases-x is not used*/
-			Semtech,ref-phases-a = <5>;
-			Semtech,ref-phases-b = <6>;
-			Semtech,ref-phases-c = <0xff>;
-			Semtech,button-flag = <0x1f>;
-                        reinit-on-i2c-failure = <1>;
-			Semtech,reg-num = <66>;
-			Semtech,reg-init = <
-				0x4004 0x78
-				0x4008 0x8
-				0x8020 0x32
-				0x8028 0x45F
-				0x8034 0x45F
-				0x8040 0x45F
-				0x804C 0x45F
-				0x8058 0x45F
-				0x8064 0x45E
-				0x8070 0x45E
-				0x807C 0x45E
-				0x8030 0x924925
-				0x803C 0xB24924
-				0x8048 0x924964
-				0x8054 0x925924
-				0x8060 0x964924
-				0x806C 0x92492C
-				0x8078 0x92C924
-				0x8084 0x924924
-				0x8098 0x685A
-				0x80B8 0x2D23
-				0x80D8 0x4D40
-				0x80F8 0x5A47
-				0x8118 0x4637
-				0x8138 0xFF
-				0x8158 0xFF
-				0x8178 0xFF
-				0x80A0 0x20200001
-				0x80C0 0x1A1A0002
-				0x80E0 0x20200001
-				0x8100 0x0
-				0x8120 0x20200002
-				0x8140 0x0
-				0x8160 0x0
-				0x8180 0x0
-				0x8188 0x8000015
-				0x818C 0x8000016
-				0x8190 0x0
-				0x8194 0x0
-				0x8090 0x7C845200
-				0x80B0 0x7C845102
-				0x80D0 0x7C845200
-				0x80F0 0x7C845100
-				0x8110 0x7C845100
-				0x8130 0x54AC5300
-				0x8150 0x54AC5300
-				0x8170 0x54AC5300
-				0x8088 0x300000
-				0x80A8 0x300000
-				0x80C8 0x300000
-				0x80E8 0x300000
-				0x8108 0x300000
-				0x8128 0x300000
-				0x8148 0x300000
-				0x8168 0x300000
-				0x808C 0x60200020
-				0x80AC 0x60200010
-				0x80CC 0x60200020
-				0x80EC 0x60200010
-				0x810C 0x60200010
-				0x812C 0x60200031
-				0x814C 0x60200031
-				0x816C 0x60200031
-				0x8024 0x7F7F
-				0x8274 0x2E040000
-				0x4280 0x0E
-			>;
-	};
-	awinic_sar@12 {
-		/* common node */
-		compatible = "awinic,aw_sar";
-		reg = < 0x12 >;
-		//aw_sar,regulator-power-supply = <1>;
-		sar-num = < 0 >;
-		//vcc0-supply = <&L12A>;
-		channel_use_flag = <0x1f>;
-		aw_sar,use_plug_cail;
-		aw_sar,update_fw;
-		/* private node belongs to aw963xx */
-		start-mode = < 1 >; // 0: start in rom  1: start in ram
-		irq-mux = < 2 >; // set csx as irq pin. config this field when connect to aw96308/aw96310
-		status = "disabled";
-	};
+&sx937x {
+		pinctrl-names = "default","sleep";
+		pinctrl-0 = <&sar_int_fogor_default>;
+		pinctrl-1 = <&sar_int_fogor_sleep>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <60 0x02>;
+		interrupt-names = "sx937x_irq";
+		Semtech,nirq-gpio = <&tlmm 60 0x02>;
+		reinit-on-i2c-failure = <1>;
+		Semtech,reg-num = <66>;
+		Semtech,reg-init = <
+			0x8024 0x7F00 	  /*PHEN, Disable all Phases*/
+			0x4004 0x70       /*irq mask*/
+			0x8020 0x32
+			0x8028 0x45F
+			0x8034 0x45F
+			0x8040 0x45F
+			0x804C 0x45F
+			0x8058 0x45F
+			0x8064 0x45E
+			0x8070 0x45E
+			0x807C 0x45E
+			0x8030 0x924925
+			0x803C 0xB24924
+			0x8048 0x924964
+			0x8054 0x925924
+			0x8060 0x964924
+			0x806C 0x92492C
+			0x8078 0x92C924
+			0x8084 0x924924
+			0x8098 0x685A
+			0x80B8 0x2D23
+			0x80D8 0x4D40
+			0x80F8 0x5A47
+			0x8118 0x4637
+			0x8138 0xFF
+			0x8158 0xFF
+			0x8178 0xFF
+			0x80A0 0x20200001
+			0x80C0 0x1A1A0002
+			0x80E0 0x20200001
+			0x8100 0x0
+			0x8120 0x20200002
+			0x8140 0x0
+			0x8160 0x0
+			0x8180 0x0
+			0x8188 0x8000015
+			0x818C 0x8000016
+			0x8190 0x0
+			0x8194 0x0
+			0x8090 0x7C845200
+			0x80B0 0x7C845102
+			0x80D0 0x7C845200
+			0x80F0 0x7C845100
+			0x8110 0x7C845100
+			0x8130 0x54AC5300
+			0x8150 0x54AC5300
+			0x8170 0x54AC5300
+			0x8088 0x300000
+			0x80A8 0x300000
+			0x80C8 0x300000
+			0x80E8 0x300000
+			0x8108 0x300000
+			0x8128 0x300000
+			0x8148 0x300000
+			0x8168 0x300000
+			0x808C 0x60200020
+			0x80AC 0x60200010
+			0x80CC 0x60200020
+			0x80EC 0x60200010
+			0x810C 0x60200010
+			0x812C 0x60200031
+			0x814C 0x60200031
+			0x816C 0x60200031
+			0x8024 0x7F7F
+			0x8274 0x2E040000
+			0x4280 0x0E
+		>;
 };