From 06fb37a1725d725e94dc81f193905c79dbbf1647 Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Sat, 8 Aug 2020 21:56:10 -0500 Subject: [PATCH 001/130] ARM: dts: logicpd-torpedo-baseboard: Fix broken audio [ Upstream commit d7dfee67688ac7f2dfd4c3bc70c053ee990c40b5 ] Older versions of U-Boot would pinmux the whole board, but as the bootloader got updated, it started to only pinmux the pins it needed, and expected Linux to configure what it needed. Unfortunately this caused an issue with the audio, because the mcbsp2 pins were configured in the device tree, they were never referenced by the driver. When U-Boot stopped muxing the audio pins, the audio died. This patch adds the references to the associate the pin controller with the mcbsp2 driver which makes audio operate again. Fixes: 739f85bba5ab ("ARM: dts: Move most of logicpd-torpedo-37xx-devkit to logicpd-torpedo-baseboard") Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin --- arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi index 449cc7616da6..e7a8f8addb6e 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi @@ -80,6 +80,8 @@ }; &mcbsp2 { + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; status = "okay"; }; From 678cde6f4e2b208c31e994b54cb87833ed7b7f7b Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Fri, 14 Aug 2020 07:53:38 -0500 Subject: [PATCH 002/130] ARM: dts: logicpd-som-lv-baseboard: Fix broken audio [ Upstream commit 4d26e9a028e3d88223e06fa133c3d55af7ddbceb ] Older versions of U-Boot would pinmux the whole board, but as the bootloader got updated, it started to only pinmux the pins it needed, and expected Linux to configure what it needed. Unfortunately this caused an issue with the audio, because the mcbsp2 pins were configured in the device tree but never referenced by the driver. When U-Boot stopped muxing the audio pins, the audio died. This patch adds the references to the associate the pin controller with the mcbsp2 driver which makes audio operate again. Fixes: 5cb8b0fa55a9 ("ARM: dts: Move most of logicpd-som-lv-37xx-devkit.dts to logicpd-som-lv-baseboard.dtsi") Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin --- arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi index 100396f6c2fe..c310c33ca6f3 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi @@ -51,6 +51,8 @@ &mcbsp2 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; }; &charger { From e9019af9b0cc954c1229e569e956b2fddf757dbd Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Fri, 14 Aug 2020 07:24:41 -0500 Subject: [PATCH 003/130] ARM: dts: logicpd-som-lv-baseboard: Fix missing video [ Upstream commit d1db7b80a6c8c5f81db0e80664d29b374750e2c6 ] A previous commit removed the panel-dpi driver, which made the SOM-LV video stop working because it relied on the DPI driver for setting video timings. Now that the simple-panel driver is available in omap2plus, this patch migrates the SOM-LV dev kits to use a similar panel and remove the manual timing requirements. A similar patch was already done and applied to the Torpedo family. Fixes: 8bf4b1621178 ("drm/omap: Remove panel-dpi driver") Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin --- .../boot/dts/logicpd-som-lv-baseboard.dtsi | 27 ++++--------------- 1 file changed, 5 insertions(+), 22 deletions(-) diff --git a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi index c310c33ca6f3..395e05f10d36 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi @@ -104,35 +104,18 @@ regulator-max-microvolt = <3300000>; }; - lcd0: display@0 { - compatible = "panel-dpi"; - label = "28"; - status = "okay"; - /* default-on; */ + lcd0: display { + /* This isn't the exact LCD, but the timings meet spec */ + compatible = "logicpd,type28"; pinctrl-names = "default"; pinctrl-0 = <&lcd_enable_pin>; - enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */ + backlight = <&bl>; + enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; port { lcd_in: endpoint { remote-endpoint = <&dpi_out>; }; }; - - panel-timing { - clock-frequency = <9000000>; - hactive = <480>; - vactive = <272>; - hfront-porch = <3>; - hback-porch = <2>; - hsync-len = <42>; - vback-porch = <3>; - vfront-porch = <2>; - vsync-len = <11>; - hsync-active = <1>; - vsync-active = <1>; - de-active = <1>; - pixelclk-active = <0>; - }; }; bl: backlight { From 69163464bcd3d843e9152fbe62775719f7021b87 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Micha=C5=82=20Miros=C5=82aw?= Date: Wed, 12 Aug 2020 03:31:34 +0200 Subject: [PATCH 004/130] regulator: push allocation in regulator_ena_gpio_request() out of lock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 467bf30142c64f2eb64e2ac67fa4595126230efd ] Move another allocation out of regulator_list_mutex-protected region, as reclaim might want to take the same lock. WARNING: possible circular locking dependency detected 5.7.13+ #534 Not tainted ------------------------------------------------------ kswapd0/383 is trying to acquire lock: c0e5d920 (regulator_list_mutex){+.+.}-{3:3}, at: regulator_lock_dependent+0x54/0x2c0 but task is already holding lock: c0e38518 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x0/0x50 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire.part.11+0x40/0x50 fs_reclaim_acquire+0x24/0x28 kmem_cache_alloc_trace+0x40/0x1e8 regulator_register+0x384/0x1630 devm_regulator_register+0x50/0x84 reg_fixed_voltage_probe+0x248/0x35c [...] other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(regulator_list_mutex); lock(fs_reclaim); lock(regulator_list_mutex); *** DEADLOCK *** [...] 2 locks held by kswapd0/383: #0: c0e38518 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x0/0x50 #1: cb70e5e0 (hctx->srcu){....}-{0:0}, at: hctx_lock+0x60/0xb8 [...] Fixes: 541d052d7215 ("regulator: core: Only support passing enable GPIO descriptors") [this commit only changes context] Fixes: f8702f9e4aa7 ("regulator: core: Use ww_mutex for regulators locking") [this is when the regulator_list_mutex was introduced in reclaim locking path] Signed-off-by: Michał Mirosław Link: https://lore.kernel.org/r/41fe6a9670335721b48e8f5195038c3d67a3bf92.1597195321.git.mirq-linux@rere.qmqm.pl Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- drivers/regulator/core.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index a17aebe0aa7a..19826641881b 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2217,10 +2217,13 @@ EXPORT_SYMBOL_GPL(regulator_bulk_unregister_supply_alias); static int regulator_ena_gpio_request(struct regulator_dev *rdev, const struct regulator_config *config) { - struct regulator_enable_gpio *pin; + struct regulator_enable_gpio *pin, *new_pin; struct gpio_desc *gpiod; gpiod = config->ena_gpiod; + new_pin = kzalloc(sizeof(*new_pin), GFP_KERNEL); + + mutex_lock(®ulator_list_mutex); list_for_each_entry(pin, ®ulator_ena_gpio_list, list) { if (pin->gpiod == gpiod) { @@ -2229,9 +2232,13 @@ static int regulator_ena_gpio_request(struct regulator_dev *rdev, } } - pin = kzalloc(sizeof(struct regulator_enable_gpio), GFP_KERNEL); - if (pin == NULL) + if (new_pin == NULL) { + mutex_unlock(®ulator_list_mutex); return -ENOMEM; + } + + pin = new_pin; + new_pin = NULL; pin->gpiod = gpiod; list_add(&pin->list, ®ulator_ena_gpio_list); @@ -2239,6 +2246,10 @@ static int regulator_ena_gpio_request(struct regulator_dev *rdev, update_ena_gpio_to_rdev: pin->request_count++; rdev->ena_pin = pin; + + mutex_unlock(®ulator_list_mutex); + kfree(new_pin); + return 0; } @@ -5108,9 +5119,7 @@ regulator_register(const struct regulator_desc *regulator_desc, } if (config->ena_gpiod) { - mutex_lock(®ulator_list_mutex); ret = regulator_ena_gpio_request(rdev, config); - mutex_unlock(®ulator_list_mutex); if (ret != 0) { rdev_err(rdev, "Failed to request enable GPIO: %d\n", ret); From 25915590865ceee0d054d648921f553403a004d9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Micha=C5=82=20Miros=C5=82aw?= Date: Wed, 12 Aug 2020 03:31:38 +0200 Subject: [PATCH 005/130] regulator: remove superfluous lock in regulator_resolve_coupling() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit a577f3456c0a2fac3dee037c483753e6e68f3e49 ] The code modifies rdev, but locks c_rdev instead. Remove the lock as this is held together by regulator_list_mutex taken in the caller. Fixes: f9503385b187 ("regulator: core: Mutually resolve regulators coupling") Signed-off-by: Michał Mirosław Reviewed-by: Dmitry Osipenko Link: https://lore.kernel.org/r/25eb81cefb37a646f3e44eaaf1d8ae8881cfde52.1597195321.git.mirq-linux@rere.qmqm.pl Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- drivers/regulator/core.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 19826641881b..c457fa3b8c3e 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -4868,13 +4868,9 @@ static void regulator_resolve_coupling(struct regulator_dev *rdev) return; } - regulator_lock(c_rdev); - c_desc->coupled_rdevs[i] = c_rdev; c_desc->n_resolved++; - regulator_unlock(c_rdev); - regulator_resolve_coupling(c_rdev); } } From 6a2be713c78f0672da5f44ed88abfd42999133cd Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Fri, 31 Jul 2020 10:26:40 -0500 Subject: [PATCH 006/130] ARM: dts: socfpga: fix register entry for timer3 on Arria10 [ Upstream commit 0ff5a4812be4ebd4782bbb555d369636eea164f7 ] Fixes the register address for the timer3 entry on Arria10. Fixes: 475dc86d08de4 ("arm: dts: socfpga: Add a base DTSI for Altera's Arria10 SOC") Signed-off-by: Dinh Nguyen Signed-off-by: Sasha Levin --- arch/arm/boot/dts/socfpga_arria10.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 906bfb580e9e..f261a3344071 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -819,7 +819,7 @@ timer3: timer3@ffd00100 { compatible = "snps,dw-apb-timer"; interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xffd01000 0x100>; + reg = <0xffd00100 0x100>; clocks = <&l4_sys_free_clk>; clock-names = "timer"; resets = <&rst L4SYSTIMER1_RESET>; From d5763bbf866431d858f13b43a101fe514f5258d7 Mon Sep 17 00:00:00 2001 From: Po-Hsu Lin Date: Wed, 18 Mar 2020 10:42:15 +0800 Subject: [PATCH 007/130] selftests/timers: Turn off timeout setting [ Upstream commit 5c1e4f7e9e49b6925b1fb5c507d2c614f3edb292 ] The following 4 tests in timers can take longer than the default 45 seconds that added in commit 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test") to run: * nsleep-lat - 2m7.350s * set-timer-lat - 2m0.66s * inconsistency-check - 1m45.074s * raw_skew - 2m0.013s Thus they will be marked as failed with the current 45s setting: not ok 3 selftests: timers: nsleep-lat # TIMEOUT not ok 4 selftests: timers: set-timer-lat # TIMEOUT not ok 6 selftests: timers: inconsistency-check # TIMEOUT not ok 7 selftests: timers: raw_skew # TIMEOUT Disable the timeout setting for timers can make these tests finish properly: ok 3 selftests: timers: nsleep-lat ok 4 selftests: timers: set-timer-lat ok 6 selftests: timers: inconsistency-check ok 7 selftests: timers: raw_skew https://bugs.launchpad.net/bugs/1864626 Fixes: 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test") Signed-off-by: Po-Hsu Lin Acked-by: John Stultz Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin --- tools/testing/selftests/timers/Makefile | 1 + tools/testing/selftests/timers/settings | 1 + 2 files changed, 2 insertions(+) create mode 100644 tools/testing/selftests/timers/settings diff --git a/tools/testing/selftests/timers/Makefile b/tools/testing/selftests/timers/Makefile index 7656c7ce79d9..0e73a16874c4 100644 --- a/tools/testing/selftests/timers/Makefile +++ b/tools/testing/selftests/timers/Makefile @@ -13,6 +13,7 @@ DESTRUCTIVE_TESTS = alarmtimer-suspend valid-adjtimex adjtick change_skew \ TEST_GEN_PROGS_EXTENDED = $(DESTRUCTIVE_TESTS) +TEST_FILES := settings include ../lib.mk diff --git a/tools/testing/selftests/timers/settings b/tools/testing/selftests/timers/settings new file mode 100644 index 000000000000..e7b9417537fb --- /dev/null +++ b/tools/testing/selftests/timers/settings @@ -0,0 +1 @@ +timeout=0 From ab56ed56f8c8e9ac74094d42250487b75487d028 Mon Sep 17 00:00:00 2001 From: Matthias Schiffer Date: Tue, 28 Jul 2020 12:50:06 +0200 Subject: [PATCH 008/130] ARM: dts: ls1021a: fix QuadSPI-memory reg range [ Upstream commit 81dbbb417da4d1ac407dca5b434d39d5b6b91ef3 ] According to the Reference Manual, the correct size is 512 MiB. Without this fix, probing the QSPI fails: fsl-quadspi 1550000.spi: ioremap failed for resource [mem 0x40000000-0x7fffffff] fsl-quadspi 1550000.spi: Freescale QuadSPI probe failed fsl-quadspi: probe of 1550000.spi failed with error -12 Fixes: 85f8ee78ab72 ("ARM: dts: ls1021a: Add support for QSPI with ls1021a SoC") Signed-off-by: Matthias Schiffer Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin --- arch/arm/boot/dts/ls1021a.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 5a8e58b66342..c62fcca7b426 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -181,7 +181,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x1550000 0x0 0x10000>, - <0x0 0x40000000 0x0 0x40000000>; + <0x0 0x40000000 0x0 0x20000000>; reg-names = "QuadSPI", "QuadSPI-memory"; interrupts = ; clock-names = "qspi_en", "qspi"; From af2e06b02575dcb3934bce0be7f3fd26347f6aa4 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Mon, 3 Aug 2020 16:01:24 +0800 Subject: [PATCH 009/130] ARM: dts: imx7ulp: Correct gpio ranges [ Upstream commit deb6323b739c54e1a1e83cd3a2bae4901e3eebf6 ] Correct gpio ranges according to i.MX7ULP pinctrl driver: gpio_ptc: ONLY pin 0~19 are available; gpio_ptd: ONLY pin 0~11 are available; gpio_pte: ONLY pin 0~15 are available; gpio_ptf: ONLY pin 0~19 are available; Fixes: 20434dc92c05 ("ARM: dts: imx: add common imx7ulp dtsi support") Signed-off-by: Anson Huang Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin --- arch/arm/boot/dts/imx7ulp.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi index 3dac6898cdc5..0108b63df77d 100644 --- a/arch/arm/boot/dts/imx7ulp.dtsi +++ b/arch/arm/boot/dts/imx7ulp.dtsi @@ -397,7 +397,7 @@ clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, <&pcc3 IMX7ULP_CLK_PCTLC>; clock-names = "gpio", "port"; - gpio-ranges = <&iomuxc1 0 0 32>; + gpio-ranges = <&iomuxc1 0 0 20>; }; gpio_ptd: gpio@40af0000 { @@ -411,7 +411,7 @@ clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, <&pcc3 IMX7ULP_CLK_PCTLD>; clock-names = "gpio", "port"; - gpio-ranges = <&iomuxc1 0 32 32>; + gpio-ranges = <&iomuxc1 0 32 12>; }; gpio_pte: gpio@40b00000 { @@ -425,7 +425,7 @@ clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, <&pcc3 IMX7ULP_CLK_PCTLE>; clock-names = "gpio", "port"; - gpio-ranges = <&iomuxc1 0 64 32>; + gpio-ranges = <&iomuxc1 0 64 16>; }; gpio_ptf: gpio@40b10000 { @@ -439,7 +439,7 @@ clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, <&pcc3 IMX7ULP_CLK_PCTLF>; clock-names = "gpio", "port"; - gpio-ranges = <&iomuxc1 0 96 32>; + gpio-ranges = <&iomuxc1 0 96 20>; }; }; From ca337b53fff3919e99be7256f0a46c73aa8043bc Mon Sep 17 00:00:00 2001 From: Dinghao Liu Date: Wed, 19 Aug 2020 15:56:32 +0800 Subject: [PATCH 010/130] RDMA/rxe: Fix memleak in rxe_mem_init_user [ Upstream commit e3ddd6067ee62f6e76ebcf61ff08b2c729ae412b ] When page_address() fails, umem should be freed just like when rxe_mem_alloc() fails. Fixes: 8700e3e7c485 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20200819075632.22285-1-dinghao.liu@zju.edu.cn Signed-off-by: Dinghao Liu Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin --- drivers/infiniband/sw/rxe/rxe_mr.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/infiniband/sw/rxe/rxe_mr.c b/drivers/infiniband/sw/rxe/rxe_mr.c index ea6a819b7167..ffbc50341a55 100644 --- a/drivers/infiniband/sw/rxe/rxe_mr.c +++ b/drivers/infiniband/sw/rxe/rxe_mr.c @@ -207,6 +207,7 @@ int rxe_mem_init_user(struct rxe_pd *pd, u64 start, vaddr = page_address(sg_page_iter_page(&sg_iter)); if (!vaddr) { pr_warn("null vaddr\n"); + ib_umem_release(umem); err = -ENOMEM; goto err1; } From d1878b298fc6b7ca679cfa252db5f955234e03ea Mon Sep 17 00:00:00 2001 From: Kamal Heib Date: Sun, 5 Jul 2020 13:43:10 +0300 Subject: [PATCH 011/130] RDMA/rxe: Drop pointless checks in rxe_init_ports [ Upstream commit 6112ef62826e91afbae5446d5d47b38e25f47e3f ] Both pkey_tbl_len and gid_tbl_len are set in rxe_init_port_param() - so no need to check if they aren't set. Fixes: 8700e3e7c485 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20200705104313.283034-2-kamalheib1@gmail.com Signed-off-by: Kamal Heib Reviewed-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin --- drivers/infiniband/sw/rxe/rxe.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/infiniband/sw/rxe/rxe.c b/drivers/infiniband/sw/rxe/rxe.c index a8c11b5e1e94..dee0c2b7897a 100644 --- a/drivers/infiniband/sw/rxe/rxe.c +++ b/drivers/infiniband/sw/rxe/rxe.c @@ -157,9 +157,6 @@ static int rxe_init_ports(struct rxe_dev *rxe) rxe_init_port_param(port); - if (!port->attr.pkey_tbl_len || !port->attr.gid_tbl_len) - return -EINVAL; - port->pkey_tbl = kcalloc(port->attr.pkey_tbl_len, sizeof(*port->pkey_tbl), GFP_KERNEL); From aaca6867137690c1ed6ccef74d7897784234114a Mon Sep 17 00:00:00 2001 From: Kamal Heib Date: Tue, 25 Aug 2020 18:17:25 +0300 Subject: [PATCH 012/130] RDMA/rxe: Fix panic when calling kmem_cache_create() [ Upstream commit d862060a4b43479887ae8e2c0b74a58c4e27e5f3 ] To avoid the following kernel panic when calling kmem_cache_create() with a NULL pointer from pool_cache(), Block the rxe_param_set_add() from running if the rdma_rxe module is not initialized. BUG: unable to handle kernel NULL pointer dereference at 000000000000000b PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 4 PID: 8512 Comm: modprobe Kdump: loaded Not tainted 4.18.0-231.el8.x86_64 #1 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 10/02/2018 RIP: 0010:kmem_cache_alloc+0xd1/0x1b0 Code: 8b 57 18 45 8b 77 1c 48 8b 5c 24 30 0f 1f 44 00 00 5b 48 89 e8 5d 41 5c 41 5d 41 5e 41 5f c3 81 e3 00 00 10 00 75 0e 4d 89 fe <41> f6 47 0b 04 0f 84 6c ff ff ff 4c 89 ff e8 cc da 01 00 49 89 c6 RSP: 0018:ffffa2b8c773f9d0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000005 RDX: 0000000000000004 RSI: 00000000006080c0 RDI: 0000000000000000 RBP: ffff8ea0a8634fd0 R08: ffffa2b8c773f988 R09: 00000000006000c0 R10: 0000000000000000 R11: 0000000000000230 R12: 00000000006080c0 R13: ffffffffc0a97fc8 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f9138ed9740(0000) GS:ffff8ea4ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000000b CR3: 000000046d59a000 CR4: 00000000003406e0 Call Trace: rxe_alloc+0xc8/0x160 [rdma_rxe] rxe_get_dma_mr+0x25/0xb0 [rdma_rxe] __ib_alloc_pd+0xcb/0x160 [ib_core] ib_mad_init_device+0x296/0x8b0 [ib_core] add_client_context+0x11a/0x160 [ib_core] enable_device_and_get+0xdc/0x1d0 [ib_core] ib_register_device+0x572/0x6b0 [ib_core] ? crypto_create_tfm+0x32/0xe0 ? crypto_create_tfm+0x7a/0xe0 ? crypto_alloc_tfm+0x58/0xf0 rxe_register_device+0x19d/0x1c0 [rdma_rxe] rxe_net_add+0x3d/0x70 [rdma_rxe] ? dev_get_by_name_rcu+0x73/0x90 rxe_param_set_add+0xaf/0xc0 [rdma_rxe] parse_args+0x179/0x370 ? ref_module+0x1b0/0x1b0 load_module+0x135e/0x17e0 ? ref_module+0x1b0/0x1b0 ? __do_sys_init_module+0x13b/0x180 __do_sys_init_module+0x13b/0x180 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f9137ed296e This can be triggered if a user tries to use the 'module option' which is not actually a real module option but some idiotic (and thankfully no obsolete) sysfs interface. Fixes: 8700e3e7c485 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20200825151725.254046-1-kamalheib1@gmail.com Signed-off-by: Kamal Heib Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin --- drivers/infiniband/sw/rxe/rxe.c | 4 ++++ drivers/infiniband/sw/rxe/rxe.h | 2 ++ drivers/infiniband/sw/rxe/rxe_sysfs.c | 5 +++++ 3 files changed, 11 insertions(+) diff --git a/drivers/infiniband/sw/rxe/rxe.c b/drivers/infiniband/sw/rxe/rxe.c index dee0c2b7897a..70c4ea438664 100644 --- a/drivers/infiniband/sw/rxe/rxe.c +++ b/drivers/infiniband/sw/rxe/rxe.c @@ -48,6 +48,8 @@ static void rxe_cleanup_ports(struct rxe_dev *rxe) } +bool rxe_initialized; + /* free resources for a rxe device all objects created for this device must * have been destroyed */ @@ -355,6 +357,7 @@ static int __init rxe_module_init(void) return err; rdma_link_register(&rxe_link_ops); + rxe_initialized = true; pr_info("loaded\n"); return 0; } @@ -366,6 +369,7 @@ static void __exit rxe_module_exit(void) rxe_net_exit(); rxe_cache_exit(); + rxe_initialized = false; pr_info("unloaded\n"); } diff --git a/drivers/infiniband/sw/rxe/rxe.h b/drivers/infiniband/sw/rxe/rxe.h index fb07eed9e402..cae1b0a24c85 100644 --- a/drivers/infiniband/sw/rxe/rxe.h +++ b/drivers/infiniband/sw/rxe/rxe.h @@ -67,6 +67,8 @@ #define RXE_ROCE_V2_SPORT (0xc000) +extern bool rxe_initialized; + static inline u32 rxe_crc32(struct rxe_dev *rxe, u32 crc, void *next, size_t len) { diff --git a/drivers/infiniband/sw/rxe/rxe_sysfs.c b/drivers/infiniband/sw/rxe/rxe_sysfs.c index ccda5f5a3bc0..2af31d421bfc 100644 --- a/drivers/infiniband/sw/rxe/rxe_sysfs.c +++ b/drivers/infiniband/sw/rxe/rxe_sysfs.c @@ -61,6 +61,11 @@ static int rxe_param_set_add(const char *val, const struct kernel_param *kp) struct net_device *ndev; struct rxe_dev *exists; + if (!rxe_initialized) { + pr_err("Module parameters are not supported, use rdma link add or rxe_cfg\n"); + return -EAGAIN; + } + len = sanitize_arg(val, intf, sizeof(intf)); if (!len) { pr_err("add: invalid interface name\n"); From 1a2d6e722b49cc67b27b4cbd41ccf783710c2217 Mon Sep 17 00:00:00 2001 From: Selvin Xavier Date: Mon, 24 Aug 2020 11:14:32 -0700 Subject: [PATCH 013/130] RDMA/bnxt_re: Do not report transparent vlan from QP1 [ Upstream commit 2d0e60ee322d512fa6bc62d23a6760b39a380847 ] QP1 Rx CQE reports transparent VLAN ID in the completion and this is used while reporting the completion for received MAD packet. Check if the vlan id is configured before reporting it in the work completion. Fixes: 84511455ac5b ("RDMA/bnxt_re: report vlan_id and sl in qp1 recv completion") Link: https://lore.kernel.org/r/1598292876-26529-3-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Selvin Xavier Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin --- drivers/infiniband/hw/bnxt_re/ib_verbs.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/hw/bnxt_re/ib_verbs.c b/drivers/infiniband/hw/bnxt_re/ib_verbs.c index ebc3e3d4a6e2..3b05c0640338 100644 --- a/drivers/infiniband/hw/bnxt_re/ib_verbs.c +++ b/drivers/infiniband/hw/bnxt_re/ib_verbs.c @@ -2973,6 +2973,19 @@ static void bnxt_re_process_res_rawqp1_wc(struct ib_wc *wc, wc->wc_flags |= IB_WC_GRH; } +static bool bnxt_re_check_if_vlan_valid(struct bnxt_re_dev *rdev, + u16 vlan_id) +{ + /* + * Check if the vlan is configured in the host. If not configured, it + * can be a transparent VLAN. So dont report the vlan id. + */ + if (!__vlan_find_dev_deep_rcu(rdev->netdev, + htons(ETH_P_8021Q), vlan_id)) + return false; + return true; +} + static bool bnxt_re_is_vlan_pkt(struct bnxt_qplib_cqe *orig_cqe, u16 *vid, u8 *sl) { @@ -3041,9 +3054,11 @@ static void bnxt_re_process_res_shadow_qp_wc(struct bnxt_re_qp *qp, wc->src_qp = orig_cqe->src_qp; memcpy(wc->smac, orig_cqe->smac, ETH_ALEN); if (bnxt_re_is_vlan_pkt(orig_cqe, &vlan_id, &sl)) { - wc->vlan_id = vlan_id; - wc->sl = sl; - wc->wc_flags |= IB_WC_WITH_VLAN; + if (bnxt_re_check_if_vlan_valid(rdev, vlan_id)) { + wc->vlan_id = vlan_id; + wc->sl = sl; + wc->wc_flags |= IB_WC_WITH_VLAN; + } } wc->port_num = 1; wc->vendor_err = orig_cqe->status; From ddd3698271daf95f488d1faa801009403d7e0a9e Mon Sep 17 00:00:00 2001 From: Yu Kuai Date: Wed, 26 Aug 2020 09:08:26 +0800 Subject: [PATCH 014/130] drm/sun4i: add missing put_device() call in sun8i_r40_tcon_tv_set_mux() [ Upstream commit 07b5b12d97dc9f47ff3dff46c4f944a15bd762e5 ] If sun8i_r40_tcon_tv_set_mux() succeed, sun8i_r40_tcon_tv_set_mux() doesn't have a corresponding put_device(). Thus add put_device() to fix the exception handling for this function implementation. Fixes: 0305189afb32 ("drm/sun4i: tcon: Add support for R40 TCON") Signed-off-by: Yu Kuai Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20200826010826.1785487-1-yukuai3@huawei.com Signed-off-by: Sasha Levin --- drivers/gpu/drm/sun4i/sun4i_tcon.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index 0f7eafedfe8f..ae7ae432aa4a 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -1409,14 +1409,18 @@ static int sun8i_r40_tcon_tv_set_mux(struct sun4i_tcon *tcon, if (IS_ENABLED(CONFIG_DRM_SUN8I_TCON_TOP) && encoder->encoder_type == DRM_MODE_ENCODER_TMDS) { ret = sun8i_tcon_top_set_hdmi_src(&pdev->dev, id); - if (ret) + if (ret) { + put_device(&pdev->dev); return ret; + } } if (IS_ENABLED(CONFIG_DRM_SUN8I_TCON_TOP)) { ret = sun8i_tcon_top_de_config(&pdev->dev, tcon->id, id); - if (ret) + if (ret) { + put_device(&pdev->dev); return ret; + } } return 0; From af0d9818457599b1e33b20ad2b01c9ef0a80a62a Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sat, 29 Aug 2020 13:12:48 +0200 Subject: [PATCH 015/130] arm64: dts: imx8mq: Fix TMU interrupt property [ Upstream commit 1f2f98f2703e8134678fe20982886085631eda23 ] "interrupt" is not a valid property. Using proper name fixes dtbs_check warning: arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dt.yaml: tmu@30260000: 'interrupts' is a required property Fixes: e464fd2ba4d4 ("arm64: dts: imx8mq: enable the multi sensor TMU") Signed-off-by: Krzysztof Kozlowski Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 55a3d1c4bdf0..bc8540f87965 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -349,7 +349,7 @@ tmu: tmu@30260000 { compatible = "fsl,imx8mq-tmu"; reg = <0x30260000 0x10000>; - interrupt = ; + interrupts = ; clocks = <&clk IMX8MQ_CLK_TMU_ROOT>; little-endian; fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>; From 376bc3643eebae10c18f9320a3224d15ef8aeaa5 Mon Sep 17 00:00:00 2001 From: Ondrej Jirman Date: Fri, 28 Aug 2020 14:50:32 +0200 Subject: [PATCH 016/130] drm/sun4i: Fix dsi dcs long write function [ Upstream commit fd90e3808fd2c207560270c39b86b71af2231aa1 ] It's writing too much data. regmap_bulk_write expects number of register sized chunks to write, not a byte sized length of the bounce buffer. Bounce buffer needs to be padded too, so that regmap_bulk_write will not read past the end of the buffer. Fixes: 133add5b5ad4 ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support") Signed-off-by: Ondrej Jirman Signed-off-by: Maxime Ripard Reviewed-by: Jernej Skrabec Link: https://patchwork.freedesktop.org/patch/msgid/20200828125032.937148-1-megous@megous.com Signed-off-by: Sasha Levin --- drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c index 4f944ace665d..f2b288037b90 100644 --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c @@ -867,7 +867,7 @@ static int sun6i_dsi_dcs_write_long(struct sun6i_dsi *dsi, regmap_write(dsi->regs, SUN6I_DSI_CMD_TX_REG(0), sun6i_dsi_dcs_build_pkt_hdr(dsi, msg)); - bounce = kzalloc(msg->tx_len + sizeof(crc), GFP_KERNEL); + bounce = kzalloc(ALIGN(msg->tx_len + sizeof(crc), 4), GFP_KERNEL); if (!bounce) return -ENOMEM; @@ -878,7 +878,7 @@ static int sun6i_dsi_dcs_write_long(struct sun6i_dsi *dsi, memcpy((u8 *)bounce + msg->tx_len, &crc, sizeof(crc)); len += sizeof(crc); - regmap_bulk_write(dsi->regs, SUN6I_DSI_CMD_TX_REG(1), bounce, len); + regmap_bulk_write(dsi->regs, SUN6I_DSI_CMD_TX_REG(1), bounce, DIV_ROUND_UP(len, 4)); regmap_write(dsi->regs, SUN6I_DSI_CMD_CTL_REG, len + 4 - 1); kfree(bounce); From f7db02316a003c67ecf8c02037d21c765b992647 Mon Sep 17 00:00:00 2001 From: Angelo Compagnucci Date: Tue, 1 Sep 2020 11:32:18 +0200 Subject: [PATCH 017/130] iio: adc: mcp3422: fix locking on error path [ Upstream commit a139ffa40f0c24b753838b8ef3dcf6ad10eb7854 ] Reading from the chip should be unlocked on error path else the lock could never being released. Fixes: 07914c84ba30 ("iio: adc: Add driver for Microchip MCP3422/3/4 high resolution ADC") Fixes: 3f1093d83d71 ("iio: adc: mcp3422: fix locking scope") Acked-by: Jonathan Cameron Signed-off-by: Angelo Compagnucci Link: https://lore.kernel.org/r/20200901093218.1500845-1-angelo.compagnucci@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/iio/adc/mcp3422.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/iio/adc/mcp3422.c b/drivers/iio/adc/mcp3422.c index ea24d7c58b12..4d03b1f265d9 100644 --- a/drivers/iio/adc/mcp3422.c +++ b/drivers/iio/adc/mcp3422.c @@ -144,8 +144,10 @@ static int mcp3422_read_channel(struct mcp3422 *adc, config &= ~MCP3422_PGA_MASK; config |= MCP3422_PGA_VALUE(adc->pga[req_channel]); ret = mcp3422_update_config(adc, config); - if (ret < 0) + if (ret < 0) { + mutex_unlock(&adc->lock); return ret; + } msleep(mcp3422_read_times[MCP3422_SAMPLE_RATE(adc->config)]); } From 5571056a58051d85f22265e6ac62da8e7ac727a7 Mon Sep 17 00:00:00 2001 From: Angelo Compagnucci Date: Wed, 19 Aug 2020 09:55:25 +0200 Subject: [PATCH 018/130] iio: adc: mcp3422: fix locking scope commit 3f1093d83d7164e4705e4232ccf76da54adfda85 upstream. Locking should be held for the entire reading sequence involving setting the channel, waiting for the channel switch and reading from the channel. If not, reading from a channel can result mixing with the reading from another channel. Fixes: 07914c84ba30 ("iio: adc: Add driver for Microchip MCP3422/3/4 high resolution ADC") Signed-off-by: Angelo Compagnucci Link: https://lore.kernel.org/r/20200819075525.1395248-1-angelo.compagnucci@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- drivers/iio/adc/mcp3422.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/iio/adc/mcp3422.c b/drivers/iio/adc/mcp3422.c index 4d03b1f265d9..8ae4cf135157 100644 --- a/drivers/iio/adc/mcp3422.c +++ b/drivers/iio/adc/mcp3422.c @@ -95,16 +95,12 @@ static int mcp3422_update_config(struct mcp3422 *adc, u8 newconfig) { int ret; - mutex_lock(&adc->lock); - ret = i2c_master_send(adc->i2c, &newconfig, 1); if (ret > 0) { adc->config = newconfig; ret = 0; } - mutex_unlock(&adc->lock); - return ret; } @@ -137,6 +133,8 @@ static int mcp3422_read_channel(struct mcp3422 *adc, u8 config; u8 req_channel = channel->channel; + mutex_lock(&adc->lock); + if (req_channel != MCP3422_CHANNEL(adc->config)) { config = adc->config; config &= ~MCP3422_CHANNEL_MASK; @@ -151,7 +149,11 @@ static int mcp3422_read_channel(struct mcp3422 *adc, msleep(mcp3422_read_times[MCP3422_SAMPLE_RATE(adc->config)]); } - return mcp3422_read(adc, value, &config); + ret = mcp3422_read(adc, value, &config); + + mutex_unlock(&adc->lock); + + return ret; } static int mcp3422_read_raw(struct iio_dev *iio, From b3f6c2ca326b14594386610895d4239f284e1f21 Mon Sep 17 00:00:00 2001 From: Luo Jiaxing Date: Wed, 26 Aug 2020 15:24:26 +0800 Subject: [PATCH 019/130] scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA [ Upstream commit 53de092f47ff40e8d4d78d590d95819d391bf2e0 ] It was discovered that sdparm will fail when attempting to disable write cache on a SATA disk connected via libsas. In the ATA command set the write cache state is controlled through the SET FEATURES operation. This is roughly corresponds to MODE SELECT in SCSI and the latter command is what is used in the SCSI-ATA translation layer. A subtle difference is that a MODE SELECT carries data whereas SET FEATURES is defined as a non-data command in ATA. Set the DMA data direction to DMA_NONE if the requested ATA command is identified as non-data. [mkp: commit desc] Fixes: fa1c1e8f1ece ("[SCSI] Add SATA support to libsas") Link: https://lore.kernel.org/r/1598426666-54544-1-git-send-email-luojiaxing@huawei.com Reviewed-by: John Garry Reviewed-by: Jason Yan Signed-off-by: Luo Jiaxing Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin --- drivers/scsi/libsas/sas_ata.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index e9e00740f7ca..dd755a56cf52 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -208,7 +208,10 @@ static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc) task->num_scatter = si; } - task->data_dir = qc->dma_dir; + if (qc->tf.protocol == ATA_PROT_NODATA) + task->data_dir = DMA_NONE; + else + task->data_dir = qc->dma_dir; task->scatter = qc->sg; task->ata_task.retry_count = 1; task->task_state_flags = SAS_TASK_STATE_PENDING; From 0b4662709cedf1b1d044bb63e03f64cd3e33f4ce Mon Sep 17 00:00:00 2001 From: Kamal Heib Date: Wed, 2 Sep 2020 15:43:04 +0300 Subject: [PATCH 020/130] RDMA/core: Fix reported speed and width [ Upstream commit 28b0865714b315e318ac45c4fc9156f3d4649646 ] When the returned speed from __ethtool_get_link_ksettings() is SPEED_UNKNOWN this will lead to reporting a wrong speed and width for providers that uses ib_get_eth_speed(), fix that by defaulting the netdev_speed to SPEED_1000 in case the returned value from __ethtool_get_link_ksettings() is SPEED_UNKNOWN. Fixes: d41861942fc5 ("IB/core: Add generic function to extract IB speed from netdev") Link: https://lore.kernel.org/r/20200902124304.170912-1-kamalheib1@gmail.com Signed-off-by: Kamal Heib Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin --- drivers/infiniband/core/verbs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c index d4815f29cfd2..5d896f6b2b61 100644 --- a/drivers/infiniband/core/verbs.c +++ b/drivers/infiniband/core/verbs.c @@ -1749,7 +1749,7 @@ int ib_get_eth_speed(struct ib_device *dev, u8 port_num, u8 *speed, u8 *width) dev_put(netdev); - if (!rc) { + if (!rc && lksettings.base.speed != (u32)SPEED_UNKNOWN) { netdev_speed = lksettings.base.speed; } else { netdev_speed = SPEED_1000; From aa204e20f4d4bbaf42b4a4d3196484eac7621aa6 Mon Sep 17 00:00:00 2001 From: Tomas Henzl Date: Thu, 27 Aug 2020 18:53:32 +0200 Subject: [PATCH 021/130] scsi: megaraid_sas: Don't call disable_irq from process IRQ poll [ Upstream commit d2af39141eea34ef651961e885f49d96781a1016 ] disable_irq() might sleep. Replace it with disable_irq_nosync() which is sufficient as irq_poll_scheduled protects against concurrently running complete_cmd_fusion() from megasas_irqpoll() and megasas_isr_fusion(). Link: https://lore.kernel.org/r/20200827165332.8432-1-thenzl@redhat.com Fixes: a6ffd5bf681 scsi: megaraid_sas: Call disable_irq from process IRQ poll Signed-off-by: Tomas Henzl Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin --- drivers/scsi/megaraid/megaraid_sas_fusion.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c index 5bcef9769740..5dcd7b9b72ce 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.c +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c @@ -3738,7 +3738,7 @@ int megasas_irqpoll(struct irq_poll *irqpoll, int budget) instance = irq_ctx->instance; if (irq_ctx->irq_line_enable) { - disable_irq(irq_ctx->os_irq); + disable_irq_nosync(irq_ctx->os_irq); irq_ctx->irq_line_enable = false; } From 122cdbd5019fd6c74dd234479bc15467afecc252 Mon Sep 17 00:00:00 2001 From: Tomas Henzl Date: Tue, 1 Sep 2020 16:50:26 +0200 Subject: [PATCH 022/130] scsi: mpt3sas: Don't call disable_irq from IRQ poll handler [ Upstream commit b614d55b970d08bcac5b0bc15a5526181b3e4459 ] disable_irq() might sleep, replace it with disable_irq_nosync(). For synchronisation 'irq_poll_scheduled' is sufficient Fixes: 320e77acb3 scsi: mpt3sas: Irq poll to avoid CPU hard lockups Link: https://lore.kernel.org/r/20200901145026.12174-1-thenzl@redhat.com Signed-off-by: Tomas Henzl Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin --- drivers/scsi/mpt3sas/mpt3sas_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 7fd1d731555f..b7e44634d0dc 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -1632,7 +1632,7 @@ _base_irqpoll(struct irq_poll *irqpoll, int budget) reply_q = container_of(irqpoll, struct adapter_reply_queue, irqpoll); if (reply_q->irq_line_enable) { - disable_irq(reply_q->os_irq); + disable_irq_nosync(reply_q->os_irq); reply_q->irq_line_enable = false; } num_entries = _base_process_reply_queue(reply_q); From fe0278843b64db9df5fd586d79e7cd02464bd413 Mon Sep 17 00:00:00 2001 From: Tom Rix Date: Wed, 2 Sep 2020 13:26:50 -0700 Subject: [PATCH 023/130] soundwire: fix double free of dangling pointer [ Upstream commit 3fbbf2148a406b3e350fe91e6fdd78eb42ecad24 ] clang static analysis flags this problem stream.c:844:9: warning: Use of memory after it is freed kfree(bus->defer_msg.msg->buf); ^~~~~~~~~~~~~~~~~~~~~~~ This happens in an error handler cleaning up memory allocated for elements in a list. list_for_each_entry(m_rt, &stream->master_list, stream_node) { bus = m_rt->bus; kfree(bus->defer_msg.msg->buf); kfree(bus->defer_msg.msg); } And is triggered when the call to sdw_bank_switch() fails. There are a two problems. First, when sdw_bank_switch() fails, though it frees memory it does not clear bus's reference 'defer_msg.msg' to that memory. The second problem is the freeing msg->buf. In some cases msg will be NULL so this will dereference a null pointer. Need to check before freeing. Fixes: 99b8a5d608a6 ("soundwire: Add bank switch routine") Signed-off-by: Tom Rix Reviewed-by: Nick Desaulniers Reviewed-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20200902202650.14189-1-trix@redhat.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin --- drivers/soundwire/stream.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c index e69f94a8c3a8..de7c57e17710 100644 --- a/drivers/soundwire/stream.c +++ b/drivers/soundwire/stream.c @@ -702,6 +702,7 @@ error: kfree(wbuf); error_1: kfree(wr_msg); + bus->defer_msg.msg = NULL; return ret; } @@ -825,9 +826,10 @@ static int do_bank_switch(struct sdw_stream_runtime *stream) error: list_for_each_entry(m_rt, &stream->master_list, stream_node) { bus = m_rt->bus; - - kfree(bus->defer_msg.msg->buf); - kfree(bus->defer_msg.msg); + if (bus->defer_msg.msg) { + kfree(bus->defer_msg.msg->buf); + kfree(bus->defer_msg.msg); + } } msg_unlock: From f3c982d8e60a4f557e754fb425cbff01910710a7 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 28 Jul 2020 15:48:09 +0200 Subject: [PATCH 024/130] drm/sun4i: backend: Support alpha property on lowest plane [ Upstream commit e359c70462d2a82aae80274d027351d38792dde6 ] Unlike what we previously thought, only the per-pixel alpha is broken on the lowest plane and the per-plane alpha isn't. Remove the check on the alpha property being set on the lowest plane to reject a mode. Fixes: dcf496a6a608 ("drm/sun4i: sun4i: Introduce a quirk for lowest plane alpha support") Signed-off-by: Maxime Ripard Reviewed-by: Chen-Yu Tsai Cc: Paul Kocialkowski Link: https://patchwork.freedesktop.org/patch/msgid/20200728134810.883457-1-maxime@cerno.tech Signed-off-by: Sasha Levin --- drivers/gpu/drm/sun4i/sun4i_backend.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.c b/drivers/gpu/drm/sun4i/sun4i_backend.c index 4e29f4fe4a05..9ac637019f03 100644 --- a/drivers/gpu/drm/sun4i/sun4i_backend.c +++ b/drivers/gpu/drm/sun4i/sun4i_backend.c @@ -589,8 +589,7 @@ static int sun4i_backend_atomic_check(struct sunxi_engine *engine, /* We can't have an alpha plane at the lowest position */ if (!backend->quirks->supports_lowest_plane_alpha && - (plane_states[0]->fb->format->has_alpha || - (plane_states[0]->alpha != DRM_BLEND_ALPHA_OPAQUE))) + (plane_states[0]->alpha != DRM_BLEND_ALPHA_OPAQUE)) return -EINVAL; for (i = 1; i < num_planes; i++) { From c46eabd1e6cc51f5a891b043843f502f4acb87cf Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 28 Jul 2020 15:48:10 +0200 Subject: [PATCH 025/130] drm/sun4i: backend: Disable alpha on the lowest plane on the A20 [ Upstream commit 5e2e2600a3744491a8b49b92597c13b693692082 ] Unlike we previously thought, the per-pixel alpha is just as broken on the A20 as it is on the A10. Remove the quirk that says we can use it. Fixes: dcf496a6a608 ("drm/sun4i: sun4i: Introduce a quirk for lowest plane alpha support") Signed-off-by: Maxime Ripard Reviewed-by: Chen-Yu Tsai Cc: Paul Kocialkowski Link: https://patchwork.freedesktop.org/patch/msgid/20200728134810.883457-2-maxime@cerno.tech Signed-off-by: Sasha Levin --- drivers/gpu/drm/sun4i/sun4i_backend.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.c b/drivers/gpu/drm/sun4i/sun4i_backend.c index 9ac637019f03..99f081ccc15d 100644 --- a/drivers/gpu/drm/sun4i/sun4i_backend.c +++ b/drivers/gpu/drm/sun4i/sun4i_backend.c @@ -985,7 +985,6 @@ static const struct sun4i_backend_quirks sun6i_backend_quirks = { static const struct sun4i_backend_quirks sun7i_backend_quirks = { .needs_output_muxing = true, - .supports_lowest_plane_alpha = true, }; static const struct sun4i_backend_quirks sun8i_a33_backend_quirks = { From 5bead6811610e5788f078f01aa16fed9905d8764 Mon Sep 17 00:00:00 2001 From: Raul E Rangel Date: Mon, 31 Aug 2020 15:10:32 -0600 Subject: [PATCH 026/130] mmc: sdhci-acpi: Clear amd_sdhci_host on reset [ Upstream commit 2cf9bfe9be75ed3656bbf882fb70c3e3047866e4 ] The commit 61d7437ed1390 ("mmc: sdhci-acpi: Fix HS400 tuning for AMDI0040") broke resume for eMMC HS400. When the system suspends the eMMC controller is powered down. So, on resume we need to reinitialize the controller. Although, amd_sdhci_host was not getting cleared, so the DLL was never re-enabled on resume. This results in HS400 being non-functional. To fix the problem, this change clears the tuned_clock flag, clears the dll_enabled flag and disables the DLL on reset. Fixes: 61d7437ed1390 ("mmc: sdhci-acpi: Fix HS400 tuning for AMDI0040") Signed-off-by: Raul E Rangel Acked-by: Adrian Hunter Link: https://lore.kernel.org/r/20200831150517.1.I93c78bfc6575771bb653c9d3fca5eb018a08417d@changeid Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin --- drivers/mmc/host/sdhci-acpi.c | 31 ++++++++++++++++++++++++------- 1 file changed, 24 insertions(+), 7 deletions(-) diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c index 5581a5c86fce..b2d924c5e82e 100644 --- a/drivers/mmc/host/sdhci-acpi.c +++ b/drivers/mmc/host/sdhci-acpi.c @@ -547,12 +547,18 @@ static int amd_select_drive_strength(struct mmc_card *card, return MMC_SET_DRIVER_TYPE_A; } -static void sdhci_acpi_amd_hs400_dll(struct sdhci_host *host) +static void sdhci_acpi_amd_hs400_dll(struct sdhci_host *host, bool enable) { + struct sdhci_acpi_host *acpi_host = sdhci_priv(host); + struct amd_sdhci_host *amd_host = sdhci_acpi_priv(acpi_host); + /* AMD Platform requires dll setting */ sdhci_writel(host, 0x40003210, SDHCI_AMD_RESET_DLL_REGISTER); usleep_range(10, 20); - sdhci_writel(host, 0x40033210, SDHCI_AMD_RESET_DLL_REGISTER); + if (enable) + sdhci_writel(host, 0x40033210, SDHCI_AMD_RESET_DLL_REGISTER); + + amd_host->dll_enabled = enable; } /* @@ -592,10 +598,8 @@ static void amd_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) /* DLL is only required for HS400 */ if (host->timing == MMC_TIMING_MMC_HS400 && - !amd_host->dll_enabled) { - sdhci_acpi_amd_hs400_dll(host); - amd_host->dll_enabled = true; - } + !amd_host->dll_enabled) + sdhci_acpi_amd_hs400_dll(host, true); } } @@ -616,10 +620,23 @@ static int amd_sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode) return err; } +static void amd_sdhci_reset(struct sdhci_host *host, u8 mask) +{ + struct sdhci_acpi_host *acpi_host = sdhci_priv(host); + struct amd_sdhci_host *amd_host = sdhci_acpi_priv(acpi_host); + + if (mask & SDHCI_RESET_ALL) { + amd_host->tuned_clock = false; + sdhci_acpi_amd_hs400_dll(host, false); + } + + sdhci_reset(host, mask); +} + static const struct sdhci_ops sdhci_acpi_ops_amd = { .set_clock = sdhci_set_clock, .set_bus_width = sdhci_set_bus_width, - .reset = sdhci_reset, + .reset = amd_sdhci_reset, .set_uhs_signaling = sdhci_set_uhs_signaling, }; From 15dc0695a3b0c1bd5c618e867b0749ce0a2bb53b Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Thu, 27 Aug 2020 07:58:41 -0700 Subject: [PATCH 027/130] mmc: sdhci-msm: Add retries when all tuning phases are found valid [ Upstream commit 9d5dcefb7b114d610aeb2371f6a6f119af316e43 ] As the comments in this patch say, if we tune and find all phases are valid it's _almost_ as bad as no phases being found valid. Probably all phases are not really reliable but we didn't detect where the unreliable place is. That means we'll essentially be guessing and hoping we get a good phase. This is not just a problem in theory. It was causing real problems on a real board. On that board, most often phase 10 is found as the only invalid phase, though sometimes 10 and 11 are invalid and sometimes just 11. Some percentage of the time, however, all phases are found to be valid. When this happens, the current logic will decide to use phase 11. Since phase 11 is sometimes found to be invalid, this is a bad choice. Sure enough, when phase 11 is picked we often get mmc errors later in boot. I have seen cases where all phases were found to be valid 3 times in a row, so increase the retry count to 10 just to be extra sure. Fixes: 415b5a75da43 ("mmc: sdhci-msm: Add platform_execute_tuning implementation") Signed-off-by: Douglas Anderson Reviewed-by: Veerabhadrarao Badiganti Acked-by: Adrian Hunter Link: https://lore.kernel.org/r/20200827075809.1.If179abf5ecb67c963494db79c3bc4247d987419b@changeid Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin --- drivers/mmc/host/sdhci-msm.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c index 84cffdef264b..8bed81cf03ad 100644 --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c @@ -1096,7 +1096,7 @@ static void sdhci_msm_set_cdr(struct sdhci_host *host, bool enable) static int sdhci_msm_execute_tuning(struct mmc_host *mmc, u32 opcode) { struct sdhci_host *host = mmc_priv(mmc); - int tuning_seq_cnt = 3; + int tuning_seq_cnt = 10; u8 phase, tuned_phases[16], tuned_phase_cnt = 0; int rc; struct mmc_ios ios = host->mmc->ios; @@ -1152,6 +1152,22 @@ retry: } while (++phase < ARRAY_SIZE(tuned_phases)); if (tuned_phase_cnt) { + if (tuned_phase_cnt == ARRAY_SIZE(tuned_phases)) { + /* + * All phases valid is _almost_ as bad as no phases + * valid. Probably all phases are not really reliable + * but we didn't detect where the unreliable place is. + * That means we'll essentially be guessing and hoping + * we get a good phase. Better to try a few times. + */ + dev_dbg(mmc_dev(mmc), "%s: All phases valid; try again\n", + mmc_hostname(mmc)); + if (--tuning_seq_cnt) { + tuned_phase_cnt = 0; + goto retry; + } + } + rc = msm_find_most_appropriate_phase(host, tuned_phases, tuned_phase_cnt); if (rc < 0) From 43b3d09c51425fb680c3cd53f2d7a7b677f09d3b Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 5 Sep 2020 17:19:13 +0200 Subject: [PATCH 028/130] spi: stm32: Rate-limit the 'Communication suspended' message [ Upstream commit ea8be08cc9358f811e4175ba7fa7fea23c5d393e ] The 'spi_stm32 44004000.spi: Communication suspended' message means that when using PIO, the kernel did not read the FIFO fast enough and so the SPI controller paused the transfer. Currently, this is printed on every single such event, so if the kernel is busy and the controller is pausing the transfers often, the kernel will be all the more busy scrolling this message into the log buffer every few milliseconds. That is not helpful. Instead, rate-limit the message and print it every once in a while. It is not possible to use the default dev_warn_ratelimited(), because that is still too verbose, as it prints 10 lines (DEFAULT_RATELIMIT_BURST) every 5 seconds (DEFAULT_RATELIMIT_INTERVAL). The policy here is to print 1 line every 50 seconds (DEFAULT_RATELIMIT_INTERVAL * 10), because 1 line is more than enough and the cycles saved on printing are better left to the CPU to handle the SPI. However, dev_warn_once() is also not useful, as the user should be aware that this condition is possibly recurring or ongoing. Thus the custom rate-limit policy. Finally, turn the message from dev_warn() to dev_dbg(), since the system does not suffer any sort of malfunction if this message appears, it is just slowing down. This further reduces the printing into the log buffer and frees the CPU to do useful work. Fixes: dcbe0d84dfa5 ("spi: add driver for STM32 SPI controller") Signed-off-by: Marek Vasut Cc: Alexandre Torgue Cc: Amelie Delaunay Cc: Antonio Borneo Cc: Mark Brown Link: https://lore.kernel.org/r/20200905151913.117775-1-marex@denx.de Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- drivers/spi/spi-stm32.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c index 8146c2d91d30..09b418ff99b1 100644 --- a/drivers/spi/spi-stm32.c +++ b/drivers/spi/spi-stm32.c @@ -931,7 +931,11 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id) } if (sr & STM32H7_SPI_SR_SUSP) { - dev_warn(spi->dev, "Communication suspended\n"); + static DEFINE_RATELIMIT_STATE(rs, + DEFAULT_RATELIMIT_INTERVAL * 10, + 1); + if (__ratelimit(&rs)) + dev_dbg_ratelimited(spi->dev, "Communication suspended\n"); if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0))) stm32h7_spi_read_rxfifo(spi, false); /* From 9ed3ab0c62d491b507bbd55e3b4c5911bc160e88 Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Tue, 8 Sep 2020 12:56:08 -0700 Subject: [PATCH 029/130] nvme-fabrics: allow to queue requests for live queues [ Upstream commit 73a5379937ec89b91e907bb315e2434ee9696a2c ] Right now we are failing requests based on the controller state (which is checked inline in nvmf_check_ready) however we should definitely accept requests if the queue is live. When entering controller reset, we transition the controller into NVME_CTRL_RESETTING, and then return BLK_STS_RESOURCE for non-mpath requests (have blk_noretry_request set). This is also the case for NVME_REQ_USER for the wrong reason. There shouldn't be any reason for us to reject this I/O in a controller reset. We do want to prevent passthru commands on the admin queue because we need the controller to fully initialize first before we let user passthru admin commands to be issued. In a non-mpath setup, this means that the requests will simply be requeued over and over forever not allowing the q_usage_counter to drop its final reference, causing controller reset to hang if running concurrently with heavy I/O. Fixes: 35897b920c8a ("nvme-fabrics: fix and refine state checks in __nvmf_check_ready") Reviewed-by: James Smart Signed-off-by: Sagi Grimberg Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin --- drivers/nvme/host/fabrics.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/nvme/host/fabrics.c b/drivers/nvme/host/fabrics.c index 74b8818ac9a1..aa8d0805ba14 100644 --- a/drivers/nvme/host/fabrics.c +++ b/drivers/nvme/host/fabrics.c @@ -565,10 +565,14 @@ bool __nvmf_check_ready(struct nvme_ctrl *ctrl, struct request *rq, struct nvme_request *req = nvme_req(rq); /* - * If we are in some state of setup or teardown only allow - * internally generated commands. + * currently we have a problem sending passthru commands + * on the admin_q if the controller is not LIVE because we can't + * make sure that they are going out after the admin connect, + * controller enable and/or other commands in the initialization + * sequence. until the controller will be LIVE, fail with + * BLK_STS_RESOURCE so that they will be rescheduled. */ - if (!blk_rq_is_passthrough(rq) || (req->flags & NVME_REQ_USERCMD)) + if (rq->q == ctrl->admin_q && (req->flags & NVME_REQ_USERCMD)) return false; /* @@ -578,7 +582,7 @@ bool __nvmf_check_ready(struct nvme_ctrl *ctrl, struct request *rq, switch (ctrl->state) { case NVME_CTRL_NEW: case NVME_CTRL_CONNECTING: - if (nvme_is_fabrics(req->cmd) && + if (blk_rq_is_passthrough(rq) && nvme_is_fabrics(req->cmd) && req->cmd->fabrics.fctype == nvme_fabrics_type_connect) return true; break; From 45ffad151baed2e946658da840fd043ff2ef14eb Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 9 Sep 2020 12:43:04 +0300 Subject: [PATCH 030/130] spi: stm32: fix pm_runtime_get_sync() error checking [ Upstream commit c170a5a3b6944ad8e76547c4a1d9fe81c8f23ac8 ] The pm_runtime_get_sync() can return either 0 or 1 on success but this code treats 1 as a failure. Fixes: db96bf976a4f ("spi: stm32: fixes suspend/resume management") Signed-off-by: Dan Carpenter Reviewed-by: Alain Volmat Link: https://lore.kernel.org/r/20200909094304.GA420136@mwanda Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- drivers/spi/spi-stm32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c index 09b418ff99b1..9d8ceb63f7db 100644 --- a/drivers/spi/spi-stm32.c +++ b/drivers/spi/spi-stm32.c @@ -2054,7 +2054,7 @@ static int stm32_spi_resume(struct device *dev) } ret = pm_runtime_get_sync(dev); - if (ret) { + if (ret < 0) { dev_err(dev, "Unable to power device:%d\n", ret); return ret; } From 6736317f350a14a5cfe953f69685b1cb0b3607f7 Mon Sep 17 00:00:00 2001 From: Ritesh Harjani Date: Wed, 9 Sep 2020 08:44:25 +0530 Subject: [PATCH 031/130] block: Set same_page to false in __bio_try_merge_page if ret is false [ Upstream commit 2cd896a5e86fc326bda8614b96c0401dcc145868 ] If we hit the UINT_MAX limit of bio->bi_iter.bi_size and so we are anyway not merging this page in this bio, then it make sense to make same_page also as false before returning. Without this patch, we hit below WARNING in iomap. This mostly happens with very large memory system and / or after tweaking vm dirty threshold params to delay writeback of dirty data. WARNING: CPU: 18 PID: 5130 at fs/iomap/buffered-io.c:74 iomap_page_release+0x120/0x150 CPU: 18 PID: 5130 Comm: fio Kdump: loaded Tainted: G W 5.8.0-rc3 #6 Call Trace: __remove_mapping+0x154/0x320 (unreliable) iomap_releasepage+0x80/0x180 try_to_release_page+0x94/0xe0 invalidate_inode_page+0xc8/0x110 invalidate_mapping_pages+0x1dc/0x540 generic_fadvise+0x3c8/0x450 xfs_file_fadvise+0x2c/0xe0 [xfs] vfs_fadvise+0x3c/0x60 ksys_fadvise64_64+0x68/0xe0 sys_fadvise64+0x28/0x40 system_call_exception+0xf8/0x1c0 system_call_common+0xf0/0x278 Fixes: cc90bc68422 ("block: fix "check bi_size overflow before merge"") Reported-by: Shivaprasad G Bhat Suggested-by: Christoph Hellwig Signed-off-by: Anju T Sudhakar Signed-off-by: Ritesh Harjani Reviewed-by: Ming Lei Reviewed-by: Christoph Hellwig Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin --- block/bio.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/block/bio.c b/block/bio.c index 87505a93bcff..f07739300dfe 100644 --- a/block/bio.c +++ b/block/bio.c @@ -807,8 +807,10 @@ bool __bio_try_merge_page(struct bio *bio, struct page *page, struct bio_vec *bv = &bio->bi_io_vec[bio->bi_vcnt - 1]; if (page_is_mergeable(bv, page, len, off, same_page)) { - if (bio->bi_iter.bi_size > UINT_MAX - len) + if (bio->bi_iter.bi_size > UINT_MAX - len) { + *same_page = false; return false; + } bv->bv_len += len; bio->bi_iter.bi_size += len; return true; From 0f632bc483553fd2203face1384119d49edeff61 Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Fri, 4 Sep 2020 12:50:39 -0700 Subject: [PATCH 032/130] IB/isert: Fix unaligned immediate-data handling [ Upstream commit 0b089c1ef7047652b13b4cdfdb1e0e7dbdb8c9ab ] Currently we allocate rx buffers in a single contiguous buffers for headers (iser and iscsi) and data trailer. This means that most likely the data starting offset is aligned to 76 bytes (size of both headers). This worked fine for years, but at some point this broke, resulting in data corruptions in isert when a command comes with immediate data and the underlying backend device assumes 512 bytes buffer alignment. We assume a hard-requirement for all direct I/O buffers to be 512 bytes aligned. To fix this, we should avoid passing unaligned buffers for I/O. Instead, we allocate our recv buffers with some extra space such that we can have the data portion align to 512 byte boundary. This also means that we cannot reference headers or data using structure but rather accessors (as they may move based on alignment). Also, get rid of the wrong __packed annotation from iser_rx_desc as this has only harmful effects (not aligned to anything). This affects the rx descriptors for iscsi login and data plane. Fixes: 3d75ca0adef4 ("block: introduce multi-page bvec helpers") Link: https://lore.kernel.org/r/20200904195039.31687-1-sagi@grimberg.me Reported-by: Stephen Rust Tested-by: Doug Dumitru Signed-off-by: Sagi Grimberg Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin --- drivers/infiniband/ulp/isert/ib_isert.c | 93 +++++++++++++------------ drivers/infiniband/ulp/isert/ib_isert.h | 41 ++++++++--- 2 files changed, 78 insertions(+), 56 deletions(-) diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c index a1a035270cab..71268d61d2b8 100644 --- a/drivers/infiniband/ulp/isert/ib_isert.c +++ b/drivers/infiniband/ulp/isert/ib_isert.c @@ -182,15 +182,15 @@ isert_alloc_rx_descriptors(struct isert_conn *isert_conn) rx_desc = isert_conn->rx_descs; for (i = 0; i < ISERT_QP_MAX_RECV_DTOS; i++, rx_desc++) { - dma_addr = ib_dma_map_single(ib_dev, (void *)rx_desc, - ISER_RX_PAYLOAD_SIZE, DMA_FROM_DEVICE); + dma_addr = ib_dma_map_single(ib_dev, rx_desc->buf, + ISER_RX_SIZE, DMA_FROM_DEVICE); if (ib_dma_mapping_error(ib_dev, dma_addr)) goto dma_map_fail; rx_desc->dma_addr = dma_addr; rx_sg = &rx_desc->rx_sg; - rx_sg->addr = rx_desc->dma_addr; + rx_sg->addr = rx_desc->dma_addr + isert_get_hdr_offset(rx_desc); rx_sg->length = ISER_RX_PAYLOAD_SIZE; rx_sg->lkey = device->pd->local_dma_lkey; rx_desc->rx_cqe.done = isert_recv_done; @@ -202,7 +202,7 @@ dma_map_fail: rx_desc = isert_conn->rx_descs; for (j = 0; j < i; j++, rx_desc++) { ib_dma_unmap_single(ib_dev, rx_desc->dma_addr, - ISER_RX_PAYLOAD_SIZE, DMA_FROM_DEVICE); + ISER_RX_SIZE, DMA_FROM_DEVICE); } kfree(isert_conn->rx_descs); isert_conn->rx_descs = NULL; @@ -223,7 +223,7 @@ isert_free_rx_descriptors(struct isert_conn *isert_conn) rx_desc = isert_conn->rx_descs; for (i = 0; i < ISERT_QP_MAX_RECV_DTOS; i++, rx_desc++) { ib_dma_unmap_single(ib_dev, rx_desc->dma_addr, - ISER_RX_PAYLOAD_SIZE, DMA_FROM_DEVICE); + ISER_RX_SIZE, DMA_FROM_DEVICE); } kfree(isert_conn->rx_descs); @@ -408,10 +408,9 @@ isert_free_login_buf(struct isert_conn *isert_conn) ISER_RX_PAYLOAD_SIZE, DMA_TO_DEVICE); kfree(isert_conn->login_rsp_buf); - ib_dma_unmap_single(ib_dev, isert_conn->login_req_dma, - ISER_RX_PAYLOAD_SIZE, - DMA_FROM_DEVICE); - kfree(isert_conn->login_req_buf); + ib_dma_unmap_single(ib_dev, isert_conn->login_desc->dma_addr, + ISER_RX_SIZE, DMA_FROM_DEVICE); + kfree(isert_conn->login_desc); } static int @@ -420,25 +419,25 @@ isert_alloc_login_buf(struct isert_conn *isert_conn, { int ret; - isert_conn->login_req_buf = kzalloc(sizeof(*isert_conn->login_req_buf), + isert_conn->login_desc = kzalloc(sizeof(*isert_conn->login_desc), GFP_KERNEL); - if (!isert_conn->login_req_buf) + if (!isert_conn->login_desc) return -ENOMEM; - isert_conn->login_req_dma = ib_dma_map_single(ib_dev, - isert_conn->login_req_buf, - ISER_RX_PAYLOAD_SIZE, DMA_FROM_DEVICE); - ret = ib_dma_mapping_error(ib_dev, isert_conn->login_req_dma); + isert_conn->login_desc->dma_addr = ib_dma_map_single(ib_dev, + isert_conn->login_desc->buf, + ISER_RX_SIZE, DMA_FROM_DEVICE); + ret = ib_dma_mapping_error(ib_dev, isert_conn->login_desc->dma_addr); if (ret) { - isert_err("login_req_dma mapping error: %d\n", ret); - isert_conn->login_req_dma = 0; - goto out_free_login_req_buf; + isert_err("login_desc dma mapping error: %d\n", ret); + isert_conn->login_desc->dma_addr = 0; + goto out_free_login_desc; } isert_conn->login_rsp_buf = kzalloc(ISER_RX_PAYLOAD_SIZE, GFP_KERNEL); if (!isert_conn->login_rsp_buf) { ret = -ENOMEM; - goto out_unmap_login_req_buf; + goto out_unmap_login_desc; } isert_conn->login_rsp_dma = ib_dma_map_single(ib_dev, @@ -455,11 +454,11 @@ isert_alloc_login_buf(struct isert_conn *isert_conn, out_free_login_rsp_buf: kfree(isert_conn->login_rsp_buf); -out_unmap_login_req_buf: - ib_dma_unmap_single(ib_dev, isert_conn->login_req_dma, - ISER_RX_PAYLOAD_SIZE, DMA_FROM_DEVICE); -out_free_login_req_buf: - kfree(isert_conn->login_req_buf); +out_unmap_login_desc: + ib_dma_unmap_single(ib_dev, isert_conn->login_desc->dma_addr, + ISER_RX_SIZE, DMA_FROM_DEVICE); +out_free_login_desc: + kfree(isert_conn->login_desc); return ret; } @@ -578,7 +577,7 @@ isert_connect_release(struct isert_conn *isert_conn) ib_destroy_qp(isert_conn->qp); } - if (isert_conn->login_req_buf) + if (isert_conn->login_desc) isert_free_login_buf(isert_conn); isert_device_put(device); @@ -964,17 +963,18 @@ isert_login_post_recv(struct isert_conn *isert_conn) int ret; memset(&sge, 0, sizeof(struct ib_sge)); - sge.addr = isert_conn->login_req_dma; + sge.addr = isert_conn->login_desc->dma_addr + + isert_get_hdr_offset(isert_conn->login_desc); sge.length = ISER_RX_PAYLOAD_SIZE; sge.lkey = isert_conn->device->pd->local_dma_lkey; isert_dbg("Setup sge: addr: %llx length: %d 0x%08x\n", sge.addr, sge.length, sge.lkey); - isert_conn->login_req_buf->rx_cqe.done = isert_login_recv_done; + isert_conn->login_desc->rx_cqe.done = isert_login_recv_done; memset(&rx_wr, 0, sizeof(struct ib_recv_wr)); - rx_wr.wr_cqe = &isert_conn->login_req_buf->rx_cqe; + rx_wr.wr_cqe = &isert_conn->login_desc->rx_cqe; rx_wr.sg_list = &sge; rx_wr.num_sge = 1; @@ -1051,7 +1051,7 @@ post_send: static void isert_rx_login_req(struct isert_conn *isert_conn) { - struct iser_rx_desc *rx_desc = isert_conn->login_req_buf; + struct iser_rx_desc *rx_desc = isert_conn->login_desc; int rx_buflen = isert_conn->login_req_len; struct iscsi_conn *conn = isert_conn->conn; struct iscsi_login *login = conn->conn_login; @@ -1063,7 +1063,7 @@ isert_rx_login_req(struct isert_conn *isert_conn) if (login->first_request) { struct iscsi_login_req *login_req = - (struct iscsi_login_req *)&rx_desc->iscsi_header; + (struct iscsi_login_req *)isert_get_iscsi_hdr(rx_desc); /* * Setup the initial iscsi_login values from the leading * login request PDU. @@ -1082,13 +1082,13 @@ isert_rx_login_req(struct isert_conn *isert_conn) login->tsih = be16_to_cpu(login_req->tsih); } - memcpy(&login->req[0], (void *)&rx_desc->iscsi_header, ISCSI_HDR_LEN); + memcpy(&login->req[0], isert_get_iscsi_hdr(rx_desc), ISCSI_HDR_LEN); size = min(rx_buflen, MAX_KEY_VALUE_PAIRS); isert_dbg("Using login payload size: %d, rx_buflen: %d " "MAX_KEY_VALUE_PAIRS: %d\n", size, rx_buflen, MAX_KEY_VALUE_PAIRS); - memcpy(login->req_buf, &rx_desc->data[0], size); + memcpy(login->req_buf, isert_get_data(rx_desc), size); if (login->first_request) { complete(&isert_conn->login_comp); @@ -1153,14 +1153,15 @@ isert_handle_scsi_cmd(struct isert_conn *isert_conn, if (imm_data_len != data_len) { sg_nents = max(1UL, DIV_ROUND_UP(imm_data_len, PAGE_SIZE)); sg_copy_from_buffer(cmd->se_cmd.t_data_sg, sg_nents, - &rx_desc->data[0], imm_data_len); + isert_get_data(rx_desc), imm_data_len); isert_dbg("Copy Immediate sg_nents: %u imm_data_len: %d\n", sg_nents, imm_data_len); } else { sg_init_table(&isert_cmd->sg, 1); cmd->se_cmd.t_data_sg = &isert_cmd->sg; cmd->se_cmd.t_data_nents = 1; - sg_set_buf(&isert_cmd->sg, &rx_desc->data[0], imm_data_len); + sg_set_buf(&isert_cmd->sg, isert_get_data(rx_desc), + imm_data_len); isert_dbg("Transfer Immediate imm_data_len: %d\n", imm_data_len); } @@ -1229,9 +1230,9 @@ isert_handle_iscsi_dataout(struct isert_conn *isert_conn, } isert_dbg("Copying DataOut: sg_start: %p, sg_off: %u " "sg_nents: %u from %p %u\n", sg_start, sg_off, - sg_nents, &rx_desc->data[0], unsol_data_len); + sg_nents, isert_get_data(rx_desc), unsol_data_len); - sg_copy_from_buffer(sg_start, sg_nents, &rx_desc->data[0], + sg_copy_from_buffer(sg_start, sg_nents, isert_get_data(rx_desc), unsol_data_len); rc = iscsit_check_dataout_payload(cmd, hdr, false); @@ -1290,7 +1291,7 @@ isert_handle_text_cmd(struct isert_conn *isert_conn, struct isert_cmd *isert_cmd } cmd->text_in_ptr = text_in; - memcpy(cmd->text_in_ptr, &rx_desc->data[0], payload_length); + memcpy(cmd->text_in_ptr, isert_get_data(rx_desc), payload_length); return iscsit_process_text_cmd(conn, cmd, hdr); } @@ -1300,7 +1301,7 @@ isert_rx_opcode(struct isert_conn *isert_conn, struct iser_rx_desc *rx_desc, uint32_t read_stag, uint64_t read_va, uint32_t write_stag, uint64_t write_va) { - struct iscsi_hdr *hdr = &rx_desc->iscsi_header; + struct iscsi_hdr *hdr = isert_get_iscsi_hdr(rx_desc); struct iscsi_conn *conn = isert_conn->conn; struct iscsi_cmd *cmd; struct isert_cmd *isert_cmd; @@ -1398,8 +1399,8 @@ isert_recv_done(struct ib_cq *cq, struct ib_wc *wc) struct isert_conn *isert_conn = wc->qp->qp_context; struct ib_device *ib_dev = isert_conn->cm_id->device; struct iser_rx_desc *rx_desc = cqe_to_rx_desc(wc->wr_cqe); - struct iscsi_hdr *hdr = &rx_desc->iscsi_header; - struct iser_ctrl *iser_ctrl = &rx_desc->iser_header; + struct iscsi_hdr *hdr = isert_get_iscsi_hdr(rx_desc); + struct iser_ctrl *iser_ctrl = isert_get_iser_hdr(rx_desc); uint64_t read_va = 0, write_va = 0; uint32_t read_stag = 0, write_stag = 0; @@ -1413,7 +1414,7 @@ isert_recv_done(struct ib_cq *cq, struct ib_wc *wc) rx_desc->in_use = true; ib_dma_sync_single_for_cpu(ib_dev, rx_desc->dma_addr, - ISER_RX_PAYLOAD_SIZE, DMA_FROM_DEVICE); + ISER_RX_SIZE, DMA_FROM_DEVICE); isert_dbg("DMA: 0x%llx, iSCSI opcode: 0x%02x, ITT: 0x%08x, flags: 0x%02x dlen: %d\n", rx_desc->dma_addr, hdr->opcode, hdr->itt, hdr->flags, @@ -1448,7 +1449,7 @@ isert_recv_done(struct ib_cq *cq, struct ib_wc *wc) read_stag, read_va, write_stag, write_va); ib_dma_sync_single_for_device(ib_dev, rx_desc->dma_addr, - ISER_RX_PAYLOAD_SIZE, DMA_FROM_DEVICE); + ISER_RX_SIZE, DMA_FROM_DEVICE); } static void @@ -1462,8 +1463,8 @@ isert_login_recv_done(struct ib_cq *cq, struct ib_wc *wc) return; } - ib_dma_sync_single_for_cpu(ib_dev, isert_conn->login_req_dma, - ISER_RX_PAYLOAD_SIZE, DMA_FROM_DEVICE); + ib_dma_sync_single_for_cpu(ib_dev, isert_conn->login_desc->dma_addr, + ISER_RX_SIZE, DMA_FROM_DEVICE); isert_conn->login_req_len = wc->byte_len - ISER_HEADERS_LEN; @@ -1478,8 +1479,8 @@ isert_login_recv_done(struct ib_cq *cq, struct ib_wc *wc) complete(&isert_conn->login_req_comp); mutex_unlock(&isert_conn->mutex); - ib_dma_sync_single_for_device(ib_dev, isert_conn->login_req_dma, - ISER_RX_PAYLOAD_SIZE, DMA_FROM_DEVICE); + ib_dma_sync_single_for_device(ib_dev, isert_conn->login_desc->dma_addr, + ISER_RX_SIZE, DMA_FROM_DEVICE); } static void diff --git a/drivers/infiniband/ulp/isert/ib_isert.h b/drivers/infiniband/ulp/isert/ib_isert.h index 3b296bac4f60..d267a6d60d87 100644 --- a/drivers/infiniband/ulp/isert/ib_isert.h +++ b/drivers/infiniband/ulp/isert/ib_isert.h @@ -59,9 +59,11 @@ ISERT_MAX_TX_MISC_PDUS + \ ISERT_MAX_RX_MISC_PDUS) -#define ISER_RX_PAD_SIZE (ISCSI_DEF_MAX_RECV_SEG_LEN + 4096 - \ - (ISER_RX_PAYLOAD_SIZE + sizeof(u64) + sizeof(struct ib_sge) + \ - sizeof(struct ib_cqe) + sizeof(bool))) +/* + * RX size is default of 8k plus headers, but data needs to align to + * 512 boundary, so use 1024 to have the extra space for alignment. + */ +#define ISER_RX_SIZE (ISCSI_DEF_MAX_RECV_SEG_LEN + 1024) #define ISCSI_ISER_SG_TABLESIZE 256 @@ -80,21 +82,41 @@ enum iser_conn_state { }; struct iser_rx_desc { - struct iser_ctrl iser_header; - struct iscsi_hdr iscsi_header; - char data[ISCSI_DEF_MAX_RECV_SEG_LEN]; + char buf[ISER_RX_SIZE]; u64 dma_addr; struct ib_sge rx_sg; struct ib_cqe rx_cqe; bool in_use; - char pad[ISER_RX_PAD_SIZE]; -} __packed; +}; static inline struct iser_rx_desc *cqe_to_rx_desc(struct ib_cqe *cqe) { return container_of(cqe, struct iser_rx_desc, rx_cqe); } +static void *isert_get_iser_hdr(struct iser_rx_desc *desc) +{ + return PTR_ALIGN(desc->buf + ISER_HEADERS_LEN, 512) - ISER_HEADERS_LEN; +} + +static size_t isert_get_hdr_offset(struct iser_rx_desc *desc) +{ + return isert_get_iser_hdr(desc) - (void *)desc->buf; +} + +static void *isert_get_iscsi_hdr(struct iser_rx_desc *desc) +{ + return isert_get_iser_hdr(desc) + sizeof(struct iser_ctrl); +} + +static void *isert_get_data(struct iser_rx_desc *desc) +{ + void *data = isert_get_iser_hdr(desc) + ISER_HEADERS_LEN; + + WARN_ON((uintptr_t)data & 511); + return data; +} + struct iser_tx_desc { struct iser_ctrl iser_header; struct iscsi_hdr iscsi_header; @@ -141,9 +163,8 @@ struct isert_conn { u32 responder_resources; u32 initiator_depth; bool pi_support; - struct iser_rx_desc *login_req_buf; + struct iser_rx_desc *login_desc; char *login_rsp_buf; - u64 login_req_dma; int login_req_len; u64 login_rsp_dma; struct iser_rx_desc *rx_descs; From 7a1e2c816acced1849ccf3ddab5a530c6e66fdbe Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 26 Aug 2020 16:43:41 -0700 Subject: [PATCH 033/130] ARM: dts: bcm: HR2: Fixed QSPI compatible string [ Upstream commit d663186293a818af97c648624bee6c7a59e8218b ] The string was incorrectly defined before from least to most specific, swap the compatible strings accordingly. Fixes: b9099ec754b5 ("ARM: dts: Add Broadcom Hurricane 2 DTS include file") Signed-off-by: Florian Fainelli Signed-off-by: Sasha Levin --- arch/arm/boot/dts/bcm-hr2.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi index e35398cc60a0..dd71ab08136b 100644 --- a/arch/arm/boot/dts/bcm-hr2.dtsi +++ b/arch/arm/boot/dts/bcm-hr2.dtsi @@ -217,7 +217,7 @@ }; qspi: spi@27200 { - compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi"; + compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi"; reg = <0x027200 0x184>, <0x027000 0x124>, <0x11c408 0x004>, From 8a9383e277e40859a6c3edd4e4236ff365af35a4 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 26 Aug 2020 16:44:25 -0700 Subject: [PATCH 034/130] ARM: dts: NSP: Fixed QSPI compatible string [ Upstream commit d1ecc40a954fd0f5e3789b91fa80f15e82284e39 ] The string was incorrectly defined before from least to most specific, swap the compatible strings accordingly. Fixes: 329f98c1974e ("ARM: dts: NSP: Add QSPI nodes to NSPI and bcm958625k DTSes") Signed-off-by: Florian Fainelli Signed-off-by: Sasha Levin --- arch/arm/boot/dts/bcm-nsp.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 418e6b97cb2e..8615d89fa469 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -282,7 +282,7 @@ }; qspi: spi@27200 { - compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi"; + compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi"; reg = <0x027200 0x184>, <0x027000 0x124>, <0x11c408 0x004>, From cd0ffeb0b8795369bcc403109131637c72239976 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 26 Aug 2020 16:45:29 -0700 Subject: [PATCH 035/130] ARM: dts: BCM5301X: Fixed QSPI compatible string [ Upstream commit b793dab8d811e103665d6bddaaea1c25db3776eb ] The string was incorrectly defined before from least to most specific, swap the compatible strings accordingly. Fixes: 1c8f40650723 ("ARM: dts: BCM5301X: convert to iProc QSPI") Signed-off-by: Florian Fainelli Signed-off-by: Sasha Levin --- arch/arm/boot/dts/bcm5301x.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 2d9b4dd05830..0016720ce530 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -488,7 +488,7 @@ }; spi@18029200 { - compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi"; + compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi"; reg = <0x18029200 0x184>, <0x18029000 0x124>, <0x1811b408 0x004>, From 75a81be8fb3e36c7e6267496eff9a196810c6ac6 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 26 Aug 2020 16:49:19 -0700 Subject: [PATCH 036/130] arm64: dts: ns2: Fixed QSPI compatible string [ Upstream commit 686e0a0c8c61e0e3f55321d0181fece3efd92777 ] The string was incorrectly defined before from least to most specific, swap the compatible strings accordingly. Fixes: ff73917d38a6 ("ARM64: dts: Add QSPI Device Tree node for NS2") Signed-off-by: Florian Fainelli Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi index 15f7b0ed3836..39802066232e 100644 --- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi @@ -745,7 +745,7 @@ }; qspi: spi@66470200 { - compatible = "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi"; + compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi"; reg = <0x66470200 0x184>, <0x66470000 0x124>, <0x67017408 0x004>, From 89c4339c4d35fa22e355bde1c8b26aa5dbb98e86 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Thu, 9 Jul 2020 19:52:32 -0700 Subject: [PATCH 037/130] ARC: HSDK: wireup perf irq [ Upstream commit fe81d927b78c4f0557836661d32e41ebc957b024 ] Newer version of HSDK aka HSDK-4xD (with dual issue HS48x4 CPU) wired up the perf interrupt, so enable that in DT. This is OK for old HSDK where this irq is ignored because pct irq is not wired up in hardware. Signed-off-by: Vineet Gupta Signed-off-by: Sasha Levin --- arch/arc/boot/dts/hsdk.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts index 9acbeba832c0..5d64a5a940ee 100644 --- a/arch/arc/boot/dts/hsdk.dts +++ b/arch/arc/boot/dts/hsdk.dts @@ -88,6 +88,8 @@ arcpct: pct { compatible = "snps,archs-pct"; + interrupt-parent = <&cpu_intc>; + interrupts = <20>; }; /* TIMER0 with interrupt for clockevent */ From 444bf09f2be4afd2a73e4c8ae0a8a700e5bbe5fa Mon Sep 17 00:00:00 2001 From: Hanjun Guo Date: Wed, 22 Jul 2020 17:54:21 +0800 Subject: [PATCH 038/130] dmaengine: acpi: Put the CSRT table after using it [ Upstream commit 7eb48dd094de5fe0e216b550e73aa85257903973 ] The acpi_get_table() should be coupled with acpi_put_table() if the mapped table is not used at runtime to release the table mapping, put the CSRT table buf after using it. Signed-off-by: Hanjun Guo Link: https://lore.kernel.org/r/1595411661-15936-1-git-send-email-guohanjun@huawei.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin --- drivers/dma/acpi-dma.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/dma/acpi-dma.c b/drivers/dma/acpi-dma.c index 8a05db3343d3..dcbcb712de6e 100644 --- a/drivers/dma/acpi-dma.c +++ b/drivers/dma/acpi-dma.c @@ -135,11 +135,13 @@ static void acpi_dma_parse_csrt(struct acpi_device *adev, struct acpi_dma *adma) if (ret < 0) { dev_warn(&adev->dev, "error in parsing resource group\n"); - return; + break; } grp = (struct acpi_csrt_group *)((void *)grp + grp->length); } + + acpi_put_table((struct acpi_table_header *)csrt); } /** From 59d2b1e5cb058122d53ab140831d69740034f951 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Tue, 18 Aug 2020 16:15:58 +0200 Subject: [PATCH 039/130] netfilter: conntrack: allow sctp hearbeat after connection re-use [ Upstream commit cc5453a5b7e90c39f713091a7ebc53c1f87d1700 ] If an sctp connection gets re-used, heartbeats are flagged as invalid because their vtag doesn't match. Handle this in a similar way as TCP conntrack when it suspects that the endpoints and conntrack are out-of-sync. When a HEARTBEAT request fails its vtag validation, flag this in the conntrack state and accept the packet. When a HEARTBEAT_ACK is received with an invalid vtag in the reverse direction after we allowed such a HEARTBEAT through, assume we are out-of-sync and re-set the vtag info. v2: remove left-over snippet from an older incarnation that moved new_state/old_state assignments, thats not needed so keep that as-is. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin --- include/linux/netfilter/nf_conntrack_sctp.h | 2 ++ net/netfilter/nf_conntrack_proto_sctp.c | 39 ++++++++++++++++++--- 2 files changed, 37 insertions(+), 4 deletions(-) diff --git a/include/linux/netfilter/nf_conntrack_sctp.h b/include/linux/netfilter/nf_conntrack_sctp.h index 9a33f171aa82..625f491b95de 100644 --- a/include/linux/netfilter/nf_conntrack_sctp.h +++ b/include/linux/netfilter/nf_conntrack_sctp.h @@ -9,6 +9,8 @@ struct ip_ct_sctp { enum sctp_conntrack state; __be32 vtag[IP_CT_DIR_MAX]; + u8 last_dir; + u8 flags; }; #endif /* _NF_CONNTRACK_SCTP_H */ diff --git a/net/netfilter/nf_conntrack_proto_sctp.c b/net/netfilter/nf_conntrack_proto_sctp.c index 4f897b14b606..810cca24b399 100644 --- a/net/netfilter/nf_conntrack_proto_sctp.c +++ b/net/netfilter/nf_conntrack_proto_sctp.c @@ -62,6 +62,8 @@ static const unsigned int sctp_timeouts[SCTP_CONNTRACK_MAX] = { [SCTP_CONNTRACK_HEARTBEAT_ACKED] = 210 SECS, }; +#define SCTP_FLAG_HEARTBEAT_VTAG_FAILED 1 + #define sNO SCTP_CONNTRACK_NONE #define sCL SCTP_CONNTRACK_CLOSED #define sCW SCTP_CONNTRACK_COOKIE_WAIT @@ -369,6 +371,7 @@ int nf_conntrack_sctp_packet(struct nf_conn *ct, u_int32_t offset, count; unsigned int *timeouts; unsigned long map[256 / sizeof(unsigned long)] = { 0 }; + bool ignore = false; if (sctp_error(skb, dataoff, state)) return -NF_ACCEPT; @@ -427,15 +430,39 @@ int nf_conntrack_sctp_packet(struct nf_conn *ct, /* Sec 8.5.1 (D) */ if (sh->vtag != ct->proto.sctp.vtag[dir]) goto out_unlock; - } else if (sch->type == SCTP_CID_HEARTBEAT || - sch->type == SCTP_CID_HEARTBEAT_ACK) { + } else if (sch->type == SCTP_CID_HEARTBEAT) { + if (ct->proto.sctp.vtag[dir] == 0) { + pr_debug("Setting %d vtag %x for dir %d\n", sch->type, sh->vtag, dir); + ct->proto.sctp.vtag[dir] = sh->vtag; + } else if (sh->vtag != ct->proto.sctp.vtag[dir]) { + if (test_bit(SCTP_CID_DATA, map) || ignore) + goto out_unlock; + + ct->proto.sctp.flags |= SCTP_FLAG_HEARTBEAT_VTAG_FAILED; + ct->proto.sctp.last_dir = dir; + ignore = true; + continue; + } else if (ct->proto.sctp.flags & SCTP_FLAG_HEARTBEAT_VTAG_FAILED) { + ct->proto.sctp.flags &= ~SCTP_FLAG_HEARTBEAT_VTAG_FAILED; + } + } else if (sch->type == SCTP_CID_HEARTBEAT_ACK) { if (ct->proto.sctp.vtag[dir] == 0) { pr_debug("Setting vtag %x for dir %d\n", sh->vtag, dir); ct->proto.sctp.vtag[dir] = sh->vtag; } else if (sh->vtag != ct->proto.sctp.vtag[dir]) { - pr_debug("Verification tag check failed\n"); - goto out_unlock; + if (test_bit(SCTP_CID_DATA, map) || ignore) + goto out_unlock; + + if ((ct->proto.sctp.flags & SCTP_FLAG_HEARTBEAT_VTAG_FAILED) == 0 || + ct->proto.sctp.last_dir == dir) + goto out_unlock; + + ct->proto.sctp.flags &= ~SCTP_FLAG_HEARTBEAT_VTAG_FAILED; + ct->proto.sctp.vtag[dir] = sh->vtag; + ct->proto.sctp.vtag[!dir] = 0; + } else if (ct->proto.sctp.flags & SCTP_FLAG_HEARTBEAT_VTAG_FAILED) { + ct->proto.sctp.flags &= ~SCTP_FLAG_HEARTBEAT_VTAG_FAILED; } } @@ -470,6 +497,10 @@ int nf_conntrack_sctp_packet(struct nf_conn *ct, } spin_unlock_bh(&ct->lock); + /* allow but do not refresh timeout */ + if (ignore) + return NF_ACCEPT; + timeouts = nf_ct_timeout_lookup(ct); if (!timeouts) timeouts = nf_sctp_pernet(nf_ct_net(ct))->timeouts; From 0faee7f8c2366b3536fa32643f70ebe74c52bde2 Mon Sep 17 00:00:00 2001 From: Xie He Date: Fri, 21 Aug 2020 14:26:59 -0700 Subject: [PATCH 040/130] drivers/net/wan/lapbether: Added needed_tailroom [ Upstream commit 1ee39c1448c4e0d480c5b390e2db1987561fb5c2 ] The underlying Ethernet device may request necessary tailroom to be allocated by setting needed_tailroom. This driver should also set needed_tailroom to request the tailroom needed by the underlying Ethernet device to be allocated. Cc: Willem de Bruijn Cc: Martin Schiller Signed-off-by: Xie He Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/wan/lapbether.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c index 996eb9c55b39..373c9ce4010a 100644 --- a/drivers/net/wan/lapbether.c +++ b/drivers/net/wan/lapbether.c @@ -340,6 +340,7 @@ static int lapbeth_new_device(struct net_device *dev) */ ndev->needed_headroom = -1 + 3 + 2 + dev->hard_header_len + dev->needed_headroom; + ndev->needed_tailroom = dev->needed_tailroom; lapbeth = netdev_priv(ndev); lapbeth->axdev = ndev; From 818c725c12417b9996011d9e33e4032974b5a38c Mon Sep 17 00:00:00 2001 From: Dinghao Liu Date: Sun, 23 Aug 2020 15:23:43 +0800 Subject: [PATCH 041/130] NFC: st95hf: Fix memleak in st95hf_in_send_cmd [ Upstream commit f97c04c316d8fea16dca449fdfbe101fbdfee6a2 ] When down_killable() fails, skb_resp should be freed just like when st95hf_spi_send() fails. Signed-off-by: Dinghao Liu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/nfc/st95hf/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/nfc/st95hf/core.c b/drivers/nfc/st95hf/core.c index 9642971e89ce..457854765983 100644 --- a/drivers/nfc/st95hf/core.c +++ b/drivers/nfc/st95hf/core.c @@ -966,7 +966,7 @@ static int st95hf_in_send_cmd(struct nfc_digital_dev *ddev, rc = down_killable(&stcontext->exchange_lock); if (rc) { WARN(1, "Semaphore is not found up in st95hf_in_send_cmd\n"); - return rc; + goto free_skb_resp; } rc = st95hf_spi_send(&stcontext->spicontext, skb->data, From 1518c24b32652d318c9bf543308e4fb791f163d7 Mon Sep 17 00:00:00 2001 From: Dinghao Liu Date: Sun, 23 Aug 2020 19:29:35 +0800 Subject: [PATCH 042/130] firestream: Fix memleak in fs_open [ Upstream commit 15ac5cdafb9202424206dc5bd376437a358963f9 ] When make_rate() fails, vcc should be freed just like other error paths in fs_open(). Signed-off-by: Dinghao Liu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/atm/firestream.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c index d287837ed755..5acb45985675 100644 --- a/drivers/atm/firestream.c +++ b/drivers/atm/firestream.c @@ -998,6 +998,7 @@ static int fs_open(struct atm_vcc *atm_vcc) error = make_rate (pcr, r, &tmc0, NULL); if (error) { kfree(tc); + kfree(vcc); return error; } } From ad360686fcd2739153c5fc7039cd3d307f6c205b Mon Sep 17 00:00:00 2001 From: Mohan Kumar Date: Tue, 25 Aug 2020 10:54:14 +0530 Subject: [PATCH 043/130] ALSA: hda: Fix 2 channel swapping for Tegra [ Upstream commit 216116eae43963c662eb84729507bad95214ca6b ] The Tegra HDA codec HW implementation has an issue related to not swapping the 2 channel Audio Sample Packet(ASP) channel mapping. Whatever the FL and FR mapping specified the left channel always comes out of left speaker and right channel on right speaker. So add condition to disallow the swapping of FL,FR during the playback. Signed-off-by: Mohan Kumar Acked-by: Sameer Pujar Link: https://lore.kernel.org/r/20200825052415.20626-2-mkumard@nvidia.com Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin --- sound/pci/hda/patch_hdmi.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index a13bad262598..e4e228c095f0 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -3678,6 +3678,7 @@ static int tegra_hdmi_build_pcms(struct hda_codec *codec) static int patch_tegra_hdmi(struct hda_codec *codec) { + struct hdmi_spec *spec; int err; err = patch_generic_hdmi(codec); @@ -3685,6 +3686,10 @@ static int patch_tegra_hdmi(struct hda_codec *codec) return err; codec->patch_ops.build_pcms = tegra_hdmi_build_pcms; + spec = codec->spec; + spec->chmap.ops.chmap_cea_alloc_validate_get_type = + nvhdmi_chmap_cea_alloc_validate_get_type; + spec->chmap.ops.chmap_validate = nvhdmi_chmap_validate; return 0; } From bcdbb7c8c7f9ac90eeff07e0e99bc986cd7db5e1 Mon Sep 17 00:00:00 2001 From: Mohan Kumar Date: Tue, 25 Aug 2020 10:54:15 +0530 Subject: [PATCH 044/130] ALSA: hda/tegra: Program WAKEEN register for Tegra [ Upstream commit 23d63a31d9f44d7daeac0d1fb65c6a73c70e5216 ] The WAKEEN bits are used to indicate which bits in the STATESTS register may cause wake event during the codec state change request. Configure the WAKEEN register for the Tegra to detect the wake events. Signed-off-by: Mohan Kumar Acked-by: Sameer Pujar Link: https://lore.kernel.org/r/20200825052415.20626-3-mkumard@nvidia.com Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin --- sound/pci/hda/hda_tegra.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/pci/hda/hda_tegra.c b/sound/pci/hda/hda_tegra.c index e5191584638a..e378cb33c69d 100644 --- a/sound/pci/hda/hda_tegra.c +++ b/sound/pci/hda/hda_tegra.c @@ -169,6 +169,10 @@ static int __maybe_unused hda_tegra_runtime_suspend(struct device *dev) struct hdac_bus *bus = azx_bus(chip); if (chip && chip->running) { + /* enable controller wake up event */ + azx_writew(chip, WAKEEN, azx_readw(chip, WAKEEN) | + STATESTS_INT_MASK); + azx_stop_chip(chip); synchronize_irq(bus->irq); azx_enter_link_reset(chip); @@ -191,6 +195,9 @@ static int __maybe_unused hda_tegra_runtime_resume(struct device *dev) if (chip && chip->running) { hda_tegra_init(hda); azx_init_chip(chip, 1); + /* disable controller wake up event*/ + azx_writew(chip, WAKEEN, azx_readw(chip, WAKEEN) & + ~STATESTS_INT_MASK); } return 0; From cb54984b79892b015ad766d62af0e5cfa3747fe8 Mon Sep 17 00:00:00 2001 From: Madhuparna Bhowmik Date: Fri, 21 Aug 2020 09:14:23 +0530 Subject: [PATCH 045/130] drivers/dma/dma-jz4780: Fix race condition between probe and irq handler [ Upstream commit 6d6018fc30bee67290dbed2fa51123f7c6f3d691 ] In probe, IRQ is requested before zchan->id is initialized which can be read in the irq handler. Hence, shift request irq after other initializations complete. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Madhuparna Bhowmik Reviewed-by: Paul Cercueil Link: https://lore.kernel.org/r/20200821034423.12713-1-madhuparnabhowmik10@gmail.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin --- drivers/dma/dma-jz4780.c | 38 +++++++++++++++++++------------------- 1 file changed, 19 insertions(+), 19 deletions(-) diff --git a/drivers/dma/dma-jz4780.c b/drivers/dma/dma-jz4780.c index bf95f1d551c5..0ecb724b394f 100644 --- a/drivers/dma/dma-jz4780.c +++ b/drivers/dma/dma-jz4780.c @@ -885,24 +885,11 @@ static int jz4780_dma_probe(struct platform_device *pdev) return -EINVAL; } - ret = platform_get_irq(pdev, 0); - if (ret < 0) - return ret; - - jzdma->irq = ret; - - ret = request_irq(jzdma->irq, jz4780_dma_irq_handler, 0, dev_name(dev), - jzdma); - if (ret) { - dev_err(dev, "failed to request IRQ %u!\n", jzdma->irq); - return ret; - } - jzdma->clk = devm_clk_get(dev, NULL); if (IS_ERR(jzdma->clk)) { dev_err(dev, "failed to get clock\n"); ret = PTR_ERR(jzdma->clk); - goto err_free_irq; + return ret; } clk_prepare_enable(jzdma->clk); @@ -955,10 +942,23 @@ static int jz4780_dma_probe(struct platform_device *pdev) jzchan->vchan.desc_free = jz4780_dma_desc_free; } + ret = platform_get_irq(pdev, 0); + if (ret < 0) + goto err_disable_clk; + + jzdma->irq = ret; + + ret = request_irq(jzdma->irq, jz4780_dma_irq_handler, 0, dev_name(dev), + jzdma); + if (ret) { + dev_err(dev, "failed to request IRQ %u!\n", jzdma->irq); + goto err_disable_clk; + } + ret = dmaenginem_async_device_register(dd); if (ret) { dev_err(dev, "failed to register device\n"); - goto err_disable_clk; + goto err_free_irq; } /* Register with OF DMA helpers. */ @@ -966,17 +966,17 @@ static int jz4780_dma_probe(struct platform_device *pdev) jzdma); if (ret) { dev_err(dev, "failed to register OF DMA controller\n"); - goto err_disable_clk; + goto err_free_irq; } dev_info(dev, "JZ4780 DMA controller initialised\n"); return 0; -err_disable_clk: - clk_disable_unprepare(jzdma->clk); - err_free_irq: free_irq(jzdma->irq, jzdma); + +err_disable_clk: + clk_disable_unprepare(jzdma->clk); return ret; } From 983efe173e37f9b0e5b0243560d6020ddee7a1d9 Mon Sep 17 00:00:00 2001 From: Yi Li Date: Wed, 26 Aug 2020 13:11:50 +0800 Subject: [PATCH 046/130] net: hns3: Fix for geneve tx checksum bug [ Upstream commit a156998fc92d3859c8e820f1583f6d0541d643c3 ] when skb->encapsulation is 0, skb->ip_summed is CHECKSUM_PARTIAL and it is udp packet, which has a dest port as the IANA assigned. the hardware is expected to do the checksum offload, but the hardware will not do the checksum offload when udp dest port is 6081. This patch fixes it by doing the checksum in software. Reported-by: Li Bing Signed-off-by: Yi Li Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c index a8ce6ca0f508..92af7204711c 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c @@ -21,6 +21,7 @@ #include #include #include +#include #include "hnae3.h" #include "hns3_enet.h" @@ -795,7 +796,7 @@ static int hns3_get_l4_protocol(struct sk_buff *skb, u8 *ol4_proto, * and it is udp packet, which has a dest port as the IANA assigned. * the hardware is expected to do the checksum offload, but the * hardware will not do the checksum offload when udp dest port is - * 4789. + * 4789 or 6081. */ static bool hns3_tunnel_csum_bug(struct sk_buff *skb) { @@ -804,7 +805,8 @@ static bool hns3_tunnel_csum_bug(struct sk_buff *skb) l4.hdr = skb_transport_header(skb); if (!(!skb->encapsulation && - l4.udp->dest == htons(IANA_VXLAN_UDP_PORT))) + (l4.udp->dest == htons(IANA_VXLAN_UDP_PORT) || + l4.udp->dest == htons(GENEVE_UDP_PORT)))) return false; skb_checksum_help(skb); From e91f2ec0bfbde475b8f21f39cfc72c075763580e Mon Sep 17 00:00:00 2001 From: Brian Foster Date: Wed, 26 Aug 2020 14:08:27 -0700 Subject: [PATCH 047/130] xfs: fix off-by-one in inode alloc block reservation calculation [ Upstream commit 657f101930bc6c5b41bd7d6c22565c4302a80d33 ] The inode chunk allocation transaction reserves inobt_maxlevels-1 blocks to accommodate a full split of the inode btree. A full split requires an allocation for every existing level and a new root block, which means inobt_maxlevels is the worst case block requirement for a transaction that inserts to the inobt. This can lead to a transaction block reservation overrun when tmpfile creation allocates an inode chunk and expands the inobt to its maximum depth. This problem has been observed in conjunction with overlayfs, which makes frequent use of tmpfiles internally. The existing reservation code goes back as far as the Linux git repo history (v2.6.12). It was likely never observed as a problem because the traditional file/directory creation transactions also include worst case block reservation for directory modifications, which most likely is able to make up for a single block deficiency in the inode allocation portion of the calculation. tmpfile support is relatively more recent (v3.15), less heavily used, and only includes the inode allocation block reservation as tmpfiles aren't linked into the directory tree on creation. Fix up the inode alloc block reservation macro and a couple of the block allocator minleft parameters that enforce an allocation to leave enough free blocks in the AG for a full inobt split. Signed-off-by: Brian Foster Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong Signed-off-by: Sasha Levin --- fs/xfs/libxfs/xfs_ialloc.c | 4 ++-- fs/xfs/libxfs/xfs_trans_space.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/xfs/libxfs/xfs_ialloc.c b/fs/xfs/libxfs/xfs_ialloc.c index 588d44613094..443cf33f6666 100644 --- a/fs/xfs/libxfs/xfs_ialloc.c +++ b/fs/xfs/libxfs/xfs_ialloc.c @@ -679,7 +679,7 @@ xfs_ialloc_ag_alloc( args.minalignslop = igeo->cluster_align - 1; /* Allow space for the inode btree to split. */ - args.minleft = igeo->inobt_maxlevels - 1; + args.minleft = igeo->inobt_maxlevels; if ((error = xfs_alloc_vextent(&args))) return error; @@ -727,7 +727,7 @@ xfs_ialloc_ag_alloc( /* * Allow space for the inode btree to split. */ - args.minleft = igeo->inobt_maxlevels - 1; + args.minleft = igeo->inobt_maxlevels; if ((error = xfs_alloc_vextent(&args))) return error; } diff --git a/fs/xfs/libxfs/xfs_trans_space.h b/fs/xfs/libxfs/xfs_trans_space.h index c6df01a2a158..7ad3659c5d2a 100644 --- a/fs/xfs/libxfs/xfs_trans_space.h +++ b/fs/xfs/libxfs/xfs_trans_space.h @@ -58,7 +58,7 @@ #define XFS_IALLOC_SPACE_RES(mp) \ (M_IGEO(mp)->ialloc_blks + \ ((xfs_sb_version_hasfinobt(&mp->m_sb) ? 2 : 1) * \ - (M_IGEO(mp)->inobt_maxlevels - 1))) + M_IGEO(mp)->inobt_maxlevels)) /* * Space reservation values for various transactions. From 0aa356dde967cc78586008bfad23a34b94e666a7 Mon Sep 17 00:00:00 2001 From: Xie He Date: Tue, 25 Aug 2020 20:03:53 -0700 Subject: [PATCH 048/130] drivers/net/wan/lapbether: Set network_header before transmitting [ Upstream commit 91244d108441013b7367b3b4dcc6869998676473 ] Set the skb's network_header before it is passed to the underlying Ethernet device for transmission. This patch fixes the following issue: When we use this driver with AF_PACKET sockets, there would be error messages of: protocol 0805 is buggy, dev (Ethernet interface name) printed in the system "dmesg" log. This is because skbs passed down to the Ethernet device for transmission don't have their network_header properly set, and the dev_queue_xmit_nit function in net/core/dev.c complains about this. Reason of setting the network_header to this place (at the end of the Ethernet header, and at the beginning of the Ethernet payload): Because when this driver receives an skb from the Ethernet device, the network_header is also set at this place. Cc: Martin Schiller Signed-off-by: Xie He Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/wan/lapbether.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c index 373c9ce4010a..2cff914aada5 100644 --- a/drivers/net/wan/lapbether.c +++ b/drivers/net/wan/lapbether.c @@ -210,6 +210,8 @@ static void lapbeth_data_transmit(struct net_device *ndev, struct sk_buff *skb) skb->dev = dev = lapbeth->ethdev; + skb_reset_network_header(skb); + dev_hard_header(skb, dev, ETH_P_DEC, bcast_addr, NULL, 0); dev_queue_xmit(skb); From a33cab0fbd2f5098b5322f362514fbf0d498619e Mon Sep 17 00:00:00 2001 From: Amar Singhal Date: Fri, 19 Jun 2020 13:52:01 -0700 Subject: [PATCH 049/130] cfg80211: Adjust 6 GHz frequency to channel conversion [ Upstream commit 2d9b55508556ccee6410310fb9ea2482fd3328eb ] Adjust the 6 GHz frequency to channel conversion function, the other way around was previously handled. Signed-off-by: Amar Singhal Link: https://lore.kernel.org/r/1592599921-10607-1-git-send-email-asinghal@codeaurora.org [rewrite commit message, hard-code channel 2] Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin --- net/wireless/util.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/net/wireless/util.c b/net/wireless/util.c index 8481e9ac33da..9abafd76ec50 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -116,11 +116,13 @@ int ieee80211_frequency_to_channel(int freq) return (freq - 2407) / 5; else if (freq >= 4910 && freq <= 4980) return (freq - 4000) / 5; - else if (freq < 5945) + else if (freq < 5925) return (freq - 5000) / 5; + else if (freq == 5935) + return 2; else if (freq <= 45000) /* DMG band lower limit */ - /* see 802.11ax D4.1 27.3.22.2 */ - return (freq - 5940) / 5; + /* see 802.11ax D6.1 27.3.22.2 */ + return (freq - 5950) / 5; else if (freq >= 58320 && freq <= 70200) return (freq - 56160) / 2160; else From 41ac2e8a6a1f412d236cc2a273e85003e57d5ea8 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Wed, 26 Aug 2020 14:12:18 -0700 Subject: [PATCH 050/130] xfs: initialize the shortform attr header padding entry [ Upstream commit 125eac243806e021f33a1fdea3687eccbb9f7636 ] Don't leak kernel memory contents into the shortform attr fork. Signed-off-by: Darrick J. Wong Reviewed-by: Eric Sandeen Reviewed-by: Dave Chinner Reviewed-by: Christoph Hellwig Signed-off-by: Sasha Levin --- fs/xfs/libxfs/xfs_attr_leaf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/xfs/libxfs/xfs_attr_leaf.c b/fs/xfs/libxfs/xfs_attr_leaf.c index fe277ee5ec7c..5472ed3ce694 100644 --- a/fs/xfs/libxfs/xfs_attr_leaf.c +++ b/fs/xfs/libxfs/xfs_attr_leaf.c @@ -583,8 +583,8 @@ xfs_attr_shortform_create(xfs_da_args_t *args) ASSERT(ifp->if_flags & XFS_IFINLINE); } xfs_idata_realloc(dp, sizeof(*hdr), XFS_ATTR_FORK); - hdr = (xfs_attr_sf_hdr_t *)ifp->if_u1.if_data; - hdr->count = 0; + hdr = (struct xfs_attr_sf_hdr *)ifp->if_u1.if_data; + memset(hdr, 0, sizeof(*hdr)); hdr->totsize = cpu_to_be16(sizeof(*hdr)); xfs_trans_log_inode(args->trans, dp, XFS_ILOG_CORE | XFS_ILOG_ADATA); } From 6ce06caf6b44e47650276c97ab0d1143d1747466 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Mon, 24 Aug 2020 12:10:33 -0700 Subject: [PATCH 051/130] irqchip/eznps: Fix build error for !ARC700 builds [ Upstream commit 89d29997f103d08264b0685796b420d911658b96 ] eznps driver is supposed to be platform independent however it ends up including stuff from inside arch/arc headers leading to rand config build errors. The quick hack to fix this (proper fix is too much chrun for non active user-base) is to add following to nps platform agnostic header. - copy AUX_IENABLE from arch/arc header - move CTOP_AUX_IACK from arch/arc/plat-eznps/*/** Reported-by: kernel test robot Reported-by: Sebastian Andrzej Siewior Link: https://lkml.kernel.org/r/20200824095831.5lpkmkafelnvlpi2@linutronix.de Signed-off-by: Vineet Gupta Signed-off-by: Sasha Levin --- arch/arc/plat-eznps/include/plat/ctop.h | 1 - include/soc/nps/common.h | 6 ++++++ 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arc/plat-eznps/include/plat/ctop.h b/arch/arc/plat-eznps/include/plat/ctop.h index a4a61531c7fb..77712c5ffe84 100644 --- a/arch/arc/plat-eznps/include/plat/ctop.h +++ b/arch/arc/plat-eznps/include/plat/ctop.h @@ -33,7 +33,6 @@ #define CTOP_AUX_DPC (CTOP_AUX_BASE + 0x02C) #define CTOP_AUX_LPC (CTOP_AUX_BASE + 0x030) #define CTOP_AUX_EFLAGS (CTOP_AUX_BASE + 0x080) -#define CTOP_AUX_IACK (CTOP_AUX_BASE + 0x088) #define CTOP_AUX_GPA1 (CTOP_AUX_BASE + 0x08C) #define CTOP_AUX_UDMC (CTOP_AUX_BASE + 0x300) diff --git a/include/soc/nps/common.h b/include/soc/nps/common.h index 9b1d43d671a3..8c18dc6d3fde 100644 --- a/include/soc/nps/common.h +++ b/include/soc/nps/common.h @@ -45,6 +45,12 @@ #define CTOP_INST_MOV2B_FLIP_R3_B1_B2_INST 0x5B60 #define CTOP_INST_MOV2B_FLIP_R3_B1_B2_LIMM 0x00010422 +#ifndef AUX_IENABLE +#define AUX_IENABLE 0x40c +#endif + +#define CTOP_AUX_IACK (0xFFFFF800 + 0x088) + #ifndef __ASSEMBLY__ /* In order to increase compilation test coverage */ From f9af5758b19bb645b412cb6b57913ba778453927 Mon Sep 17 00:00:00 2001 From: Ziye Yang Date: Sat, 22 Aug 2020 00:48:10 +0800 Subject: [PATCH 052/130] nvmet-tcp: Fix NULL dereference when a connect data comes in h2cdata pdu [ Upstream commit a6ce7d7b4adaebc27ee7e78e5ecc378a1cfc221d ] When handling commands without in-capsule data, we assign the ttag assuming we already have the queue commands array allocated (based on the queue size information in the connect data payload). However if the connect itself did not send the connect data in-capsule we have yet to allocate the queue commands,and we will assign a bogus ttag and suffer a NULL dereference when we receive the corresponding h2cdata pdu. Fix this by checking if we already allocated commands before dereferencing it when handling h2cdata, if we didn't, its for sure a connect and we should use the preallocated connect command. Signed-off-by: Ziye Yang Signed-off-by: Sagi Grimberg Signed-off-by: Sasha Levin --- drivers/nvme/target/tcp.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/nvme/target/tcp.c b/drivers/nvme/target/tcp.c index 22014e76d771..e31823f19a0f 100644 --- a/drivers/nvme/target/tcp.c +++ b/drivers/nvme/target/tcp.c @@ -150,6 +150,11 @@ static void nvmet_tcp_finish_cmd(struct nvmet_tcp_cmd *cmd); static inline u16 nvmet_tcp_cmd_tag(struct nvmet_tcp_queue *queue, struct nvmet_tcp_cmd *cmd) { + if (unlikely(!queue->nr_cmds)) { + /* We didn't allocate cmds yet, send 0xffff */ + return USHRT_MAX; + } + return cmd - queue->cmds; } @@ -847,7 +852,10 @@ static int nvmet_tcp_handle_h2c_data_pdu(struct nvmet_tcp_queue *queue) struct nvme_tcp_data_pdu *data = &queue->pdu.data; struct nvmet_tcp_cmd *cmd; - cmd = &queue->cmds[data->ttag]; + if (likely(queue->nr_cmds)) + cmd = &queue->cmds[data->ttag]; + else + cmd = &queue->connect; if (le32_to_cpu(data->data_offset) != cmd->rbytes_done) { pr_err("ttag %u unexpected data offset %u (expected %u)\n", From 35d841908c0b4807b17083e1353616ee3452e556 Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Fri, 14 Aug 2020 11:46:51 -0700 Subject: [PATCH 053/130] nvme-fabrics: don't check state NVME_CTRL_NEW for request acceptance [ Upstream commit d7144f5c4cf4de95fdc3422943cf51c06aeaf7a7 ] NVME_CTRL_NEW should never see any I/O, because in order to start initialization it has to transition to NVME_CTRL_CONNECTING and from there it will never return to this state. Reviewed-by: Christoph Hellwig Signed-off-by: Sagi Grimberg Signed-off-by: Sasha Levin --- drivers/nvme/host/fabrics.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/nvme/host/fabrics.c b/drivers/nvme/host/fabrics.c index aa8d0805ba14..3bb71f177dfd 100644 --- a/drivers/nvme/host/fabrics.c +++ b/drivers/nvme/host/fabrics.c @@ -580,7 +580,6 @@ bool __nvmf_check_ready(struct nvme_ctrl *ctrl, struct request *rq, * which is require to set the queue live in the appropinquate states. */ switch (ctrl->state) { - case NVME_CTRL_NEW: case NVME_CTRL_CONNECTING: if (blk_rq_is_passthrough(rq) && nvme_is_fabrics(req->cmd) && req->cmd->fabrics.fctype == nvme_fabrics_type_connect) From 7598a9d0a756af3d94577c6910ca120d1edf71cf Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Thu, 30 Jul 2020 13:24:45 -0700 Subject: [PATCH 054/130] nvme: have nvme_wait_freeze_timeout return if it timed out [ Upstream commit 7cf0d7c0f3c3b0203aaf81c1bc884924d8fdb9bd ] Users can detect if the wait has completed or not and take appropriate actions based on this information (e.g. weather to continue initialization or rather fail and schedule another initialization attempt). Reviewed-by: Christoph Hellwig Signed-off-by: Sagi Grimberg Signed-off-by: Sasha Levin --- drivers/nvme/host/core.c | 3 ++- drivers/nvme/host/nvme.h | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 3cb017fa3a79..2d2673d360ff 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -4148,7 +4148,7 @@ void nvme_unfreeze(struct nvme_ctrl *ctrl) } EXPORT_SYMBOL_GPL(nvme_unfreeze); -void nvme_wait_freeze_timeout(struct nvme_ctrl *ctrl, long timeout) +int nvme_wait_freeze_timeout(struct nvme_ctrl *ctrl, long timeout) { struct nvme_ns *ns; @@ -4159,6 +4159,7 @@ void nvme_wait_freeze_timeout(struct nvme_ctrl *ctrl, long timeout) break; } up_read(&ctrl->namespaces_rwsem); + return timeout; } EXPORT_SYMBOL_GPL(nvme_wait_freeze_timeout); diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h index 056953bd8bd8..2bd9f7c3084f 100644 --- a/drivers/nvme/host/nvme.h +++ b/drivers/nvme/host/nvme.h @@ -485,7 +485,7 @@ void nvme_kill_queues(struct nvme_ctrl *ctrl); void nvme_sync_queues(struct nvme_ctrl *ctrl); void nvme_unfreeze(struct nvme_ctrl *ctrl); void nvme_wait_freeze(struct nvme_ctrl *ctrl); -void nvme_wait_freeze_timeout(struct nvme_ctrl *ctrl, long timeout); +int nvme_wait_freeze_timeout(struct nvme_ctrl *ctrl, long timeout); void nvme_start_freeze(struct nvme_ctrl *ctrl); #define NVME_QID_ANY -1 From 7abff44756fe980bede6aa15d1634b43dfde5ecf Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Wed, 5 Aug 2020 18:13:48 -0700 Subject: [PATCH 055/130] nvme-tcp: serialize controller teardown sequences [ Upstream commit d4d61470ae48838f49e668503e840e1520b97162 ] In the timeout handler we may need to complete a request because the request that timed out may be an I/O that is a part of a serial sequence of controller teardown or initialization. In order to complete the request, we need to fence any other context that may compete with us and complete the request that is timing out. In this case, we could have a potential double completion in case a hard-irq or a different competing context triggered error recovery and is running inflight request cancellation concurrently with the timeout handler. Protect using a ctrl teardown_lock to serialize contexts that may complete a cancelled request due to error recovery or a reset. Signed-off-by: Sagi Grimberg Signed-off-by: Sasha Levin --- drivers/nvme/host/tcp.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c index 0166ff0e4738..a94c80727de1 100644 --- a/drivers/nvme/host/tcp.c +++ b/drivers/nvme/host/tcp.c @@ -110,6 +110,7 @@ struct nvme_tcp_ctrl { struct sockaddr_storage src_addr; struct nvme_ctrl ctrl; + struct mutex teardown_lock; struct work_struct err_work; struct delayed_work connect_work; struct nvme_tcp_request async_req; @@ -1438,7 +1439,6 @@ static void nvme_tcp_stop_queue(struct nvme_ctrl *nctrl, int qid) if (!test_and_clear_bit(NVME_TCP_Q_LIVE, &queue->flags)) return; - __nvme_tcp_stop_queue(queue); } @@ -1785,6 +1785,7 @@ out_free_queue: static void nvme_tcp_teardown_admin_queue(struct nvme_ctrl *ctrl, bool remove) { + mutex_lock(&to_tcp_ctrl(ctrl)->teardown_lock); blk_mq_quiesce_queue(ctrl->admin_q); nvme_tcp_stop_queue(ctrl, 0); if (ctrl->admin_tagset) { @@ -1795,13 +1796,16 @@ static void nvme_tcp_teardown_admin_queue(struct nvme_ctrl *ctrl, if (remove) blk_mq_unquiesce_queue(ctrl->admin_q); nvme_tcp_destroy_admin_queue(ctrl, remove); + mutex_unlock(&to_tcp_ctrl(ctrl)->teardown_lock); } static void nvme_tcp_teardown_io_queues(struct nvme_ctrl *ctrl, bool remove) { + mutex_lock(&to_tcp_ctrl(ctrl)->teardown_lock); if (ctrl->queue_count <= 1) - return; + goto out; + blk_mq_quiesce_queue(ctrl->admin_q); nvme_start_freeze(ctrl); nvme_stop_queues(ctrl); nvme_tcp_stop_io_queues(ctrl); @@ -1813,6 +1817,8 @@ static void nvme_tcp_teardown_io_queues(struct nvme_ctrl *ctrl, if (remove) nvme_start_queues(ctrl); nvme_tcp_destroy_io_queues(ctrl, remove); +out: + mutex_unlock(&to_tcp_ctrl(ctrl)->teardown_lock); } static void nvme_tcp_reconnect_or_remove(struct nvme_ctrl *ctrl) @@ -2311,6 +2317,7 @@ static struct nvme_ctrl *nvme_tcp_create_ctrl(struct device *dev, nvme_tcp_reconnect_ctrl_work); INIT_WORK(&ctrl->err_work, nvme_tcp_error_recovery_work); INIT_WORK(&ctrl->ctrl.reset_work, nvme_reset_ctrl_work); + mutex_init(&ctrl->teardown_lock); if (!(opts->mask & NVMF_OPT_TRSVCID)) { opts->trsvcid = From 34b1b26b2d8fa89d03accd6d1f48e8c346afc047 Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Tue, 28 Jul 2020 13:16:36 -0700 Subject: [PATCH 056/130] nvme-tcp: fix timeout handler [ Upstream commit 236187c4ed195161dfa4237c7beffbba0c5ae45b ] When a request times out in a LIVE state, we simply trigger error recovery and let the error recovery handle the request cancellation, however when a request times out in a non LIVE state, we make sure to complete it immediately as it might block controller setup or teardown and prevent forward progress. However tearing down the entire set of I/O and admin queues causes freeze/unfreeze imbalance (q->mq_freeze_depth) because and is really an overkill to what we actually need, which is to just fence controller teardown that may be running, stop the queue, and cancel the request if it is not already completed. Now that we have the controller teardown_lock, we can safely serialize request cancellation. This addresses a hang caused by calling extra queue freeze on controller namespaces, causing unfreeze to not complete correctly. Signed-off-by: Sagi Grimberg Signed-off-by: Sasha Levin --- drivers/nvme/host/tcp.c | 56 ++++++++++++++++++++++++++--------------- 1 file changed, 36 insertions(+), 20 deletions(-) diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c index a94c80727de1..98a045429293 100644 --- a/drivers/nvme/host/tcp.c +++ b/drivers/nvme/host/tcp.c @@ -421,6 +421,7 @@ static void nvme_tcp_error_recovery(struct nvme_ctrl *ctrl) if (!nvme_change_ctrl_state(ctrl, NVME_CTRL_RESETTING)) return; + dev_warn(ctrl->device, "starting error recovery\n"); queue_work(nvme_reset_wq, &to_tcp_ctrl(ctrl)->err_work); } @@ -2057,40 +2058,55 @@ static void nvme_tcp_submit_async_event(struct nvme_ctrl *arg) nvme_tcp_queue_request(&ctrl->async_req); } +static void nvme_tcp_complete_timed_out(struct request *rq) +{ + struct nvme_tcp_request *req = blk_mq_rq_to_pdu(rq); + struct nvme_ctrl *ctrl = &req->queue->ctrl->ctrl; + + /* fence other contexts that may complete the command */ + mutex_lock(&to_tcp_ctrl(ctrl)->teardown_lock); + nvme_tcp_stop_queue(ctrl, nvme_tcp_queue_id(req->queue)); + if (!blk_mq_request_completed(rq)) { + nvme_req(rq)->status = NVME_SC_HOST_ABORTED_CMD; + blk_mq_complete_request(rq); + } + mutex_unlock(&to_tcp_ctrl(ctrl)->teardown_lock); +} + static enum blk_eh_timer_return nvme_tcp_timeout(struct request *rq, bool reserved) { struct nvme_tcp_request *req = blk_mq_rq_to_pdu(rq); - struct nvme_tcp_ctrl *ctrl = req->queue->ctrl; + struct nvme_ctrl *ctrl = &req->queue->ctrl->ctrl; struct nvme_tcp_cmd_pdu *pdu = req->pdu; - /* - * Restart the timer if a controller reset is already scheduled. Any - * timed out commands would be handled before entering the connecting - * state. - */ - if (ctrl->ctrl.state == NVME_CTRL_RESETTING) - return BLK_EH_RESET_TIMER; - - dev_warn(ctrl->ctrl.device, + dev_warn(ctrl->device, "queue %d: timeout request %#x type %d\n", nvme_tcp_queue_id(req->queue), rq->tag, pdu->hdr.type); - if (ctrl->ctrl.state != NVME_CTRL_LIVE) { + if (ctrl->state != NVME_CTRL_LIVE) { /* - * Teardown immediately if controller times out while starting - * or we are already started error recovery. all outstanding - * requests are completed on shutdown, so we return BLK_EH_DONE. + * If we are resetting, connecting or deleting we should + * complete immediately because we may block controller + * teardown or setup sequence + * - ctrl disable/shutdown fabrics requests + * - connect requests + * - initialization admin requests + * - I/O requests that entered after unquiescing and + * the controller stopped responding + * + * All other requests should be cancelled by the error + * recovery work, so it's fine that we fail it here. */ - flush_work(&ctrl->err_work); - nvme_tcp_teardown_io_queues(&ctrl->ctrl, false); - nvme_tcp_teardown_admin_queue(&ctrl->ctrl, false); + nvme_tcp_complete_timed_out(rq); return BLK_EH_DONE; } - dev_warn(ctrl->ctrl.device, "starting error recovery\n"); - nvme_tcp_error_recovery(&ctrl->ctrl); - + /* + * LIVE state should trigger the normal error recovery which will + * handle completing this request. + */ + nvme_tcp_error_recovery(ctrl); return BLK_EH_RESET_TIMER; } From bb018c73500b67362aedaa40e5c8d18da240256d Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Thu, 30 Jul 2020 13:25:34 -0700 Subject: [PATCH 057/130] nvme-tcp: fix reset hang if controller died in the middle of a reset [ Upstream commit e5c01f4f7f623e768e868bcc08d8e7ceb03b75d0 ] If the controller becomes unresponsive in the middle of a reset, we will hang because we are waiting for the freeze to complete, but that cannot happen since we have commands that are inflight holding the q_usage_counter, and we can't blindly fail requests that times out. So give a timeout and if we cannot wait for queue freeze before unfreezing, fail and have the error handling take care how to proceed (either schedule a reconnect of remove the controller). Signed-off-by: Sagi Grimberg Signed-off-by: Sasha Levin --- drivers/nvme/host/tcp.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c index 98a045429293..9b81763b44d9 100644 --- a/drivers/nvme/host/tcp.c +++ b/drivers/nvme/host/tcp.c @@ -1693,7 +1693,15 @@ static int nvme_tcp_configure_io_queues(struct nvme_ctrl *ctrl, bool new) if (!new) { nvme_start_queues(ctrl); - nvme_wait_freeze(ctrl); + if (!nvme_wait_freeze_timeout(ctrl, NVME_IO_TIMEOUT)) { + /* + * If we timed out waiting for freeze we are likely to + * be stuck. Fail the controller initialization just + * to be safe. + */ + ret = -ENODEV; + goto out_wait_freeze_timed_out; + } blk_mq_update_nr_hw_queues(ctrl->tagset, ctrl->queue_count - 1); nvme_unfreeze(ctrl); @@ -1701,6 +1709,9 @@ static int nvme_tcp_configure_io_queues(struct nvme_ctrl *ctrl, bool new) return 0; +out_wait_freeze_timed_out: + nvme_stop_queues(ctrl); + nvme_tcp_stop_io_queues(ctrl); out_cleanup_connect_q: if (new) blk_cleanup_queue(ctrl->connect_q); From 9cf1ee492f2370652b49a17bf6cc7c4dfc6256e8 Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Wed, 5 Aug 2020 18:13:58 -0700 Subject: [PATCH 058/130] nvme-rdma: serialize controller teardown sequences [ Upstream commit 5110f40241d08334375eb0495f174b1d2c07657e ] In the timeout handler we may need to complete a request because the request that timed out may be an I/O that is a part of a serial sequence of controller teardown or initialization. In order to complete the request, we need to fence any other context that may compete with us and complete the request that is timing out. In this case, we could have a potential double completion in case a hard-irq or a different competing context triggered error recovery and is running inflight request cancellation concurrently with the timeout handler. Protect using a ctrl teardown_lock to serialize contexts that may complete a cancelled request due to error recovery or a reset. Reviewed-by: Christoph Hellwig Reviewed-by: James Smart Signed-off-by: Sagi Grimberg Signed-off-by: Sasha Levin --- drivers/nvme/host/rdma.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index d0336545e1fe..b164c662fed3 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -110,6 +110,7 @@ struct nvme_rdma_ctrl { struct sockaddr_storage src_addr; struct nvme_ctrl ctrl; + struct mutex teardown_lock; bool use_inline_data; u32 io_queues[HCTX_MAX_TYPES]; }; @@ -920,6 +921,7 @@ out_free_io_queues: static void nvme_rdma_teardown_admin_queue(struct nvme_rdma_ctrl *ctrl, bool remove) { + mutex_lock(&ctrl->teardown_lock); blk_mq_quiesce_queue(ctrl->ctrl.admin_q); nvme_rdma_stop_queue(&ctrl->queues[0]); if (ctrl->ctrl.admin_tagset) { @@ -930,11 +932,13 @@ static void nvme_rdma_teardown_admin_queue(struct nvme_rdma_ctrl *ctrl, if (remove) blk_mq_unquiesce_queue(ctrl->ctrl.admin_q); nvme_rdma_destroy_admin_queue(ctrl, remove); + mutex_unlock(&ctrl->teardown_lock); } static void nvme_rdma_teardown_io_queues(struct nvme_rdma_ctrl *ctrl, bool remove) { + mutex_lock(&ctrl->teardown_lock); if (ctrl->ctrl.queue_count > 1) { nvme_start_freeze(&ctrl->ctrl); nvme_stop_queues(&ctrl->ctrl); @@ -948,6 +952,7 @@ static void nvme_rdma_teardown_io_queues(struct nvme_rdma_ctrl *ctrl, nvme_start_queues(&ctrl->ctrl); nvme_rdma_destroy_io_queues(ctrl, remove); } + mutex_unlock(&ctrl->teardown_lock); } static void nvme_rdma_free_ctrl(struct nvme_ctrl *nctrl) @@ -1988,6 +1993,7 @@ static struct nvme_ctrl *nvme_rdma_create_ctrl(struct device *dev, return ERR_PTR(-ENOMEM); ctrl->ctrl.opts = opts; INIT_LIST_HEAD(&ctrl->list); + mutex_init(&ctrl->teardown_lock); if (!(opts->mask & NVMF_OPT_TRSVCID)) { opts->trsvcid = From d409ed01923615fe2ede4385a43b80cdc237c549 Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Wed, 29 Jul 2020 02:36:03 -0700 Subject: [PATCH 059/130] nvme-rdma: fix timeout handler [ Upstream commit 0475a8dcbcee92a5d22e40c9c6353829fc6294b8 ] When a request times out in a LIVE state, we simply trigger error recovery and let the error recovery handle the request cancellation, however when a request times out in a non LIVE state, we make sure to complete it immediately as it might block controller setup or teardown and prevent forward progress. However tearing down the entire set of I/O and admin queues causes freeze/unfreeze imbalance (q->mq_freeze_depth) because and is really an overkill to what we actually need, which is to just fence controller teardown that may be running, stop the queue, and cancel the request if it is not already completed. Now that we have the controller teardown_lock, we can safely serialize request cancellation. This addresses a hang caused by calling extra queue freeze on controller namespaces, causing unfreeze to not complete correctly. Reviewed-by: Christoph Hellwig Reviewed-by: James Smart Signed-off-by: Sagi Grimberg Signed-off-by: Sasha Levin --- drivers/nvme/host/rdma.c | 49 +++++++++++++++++++++++++++------------- 1 file changed, 33 insertions(+), 16 deletions(-) diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index b164c662fed3..4e73da2c45bb 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -1101,6 +1101,7 @@ static void nvme_rdma_error_recovery(struct nvme_rdma_ctrl *ctrl) if (!nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_RESETTING)) return; + dev_warn(ctrl->ctrl.device, "starting error recovery\n"); queue_work(nvme_reset_wq, &ctrl->err_work); } @@ -1704,6 +1705,22 @@ static int nvme_rdma_cm_handler(struct rdma_cm_id *cm_id, return 0; } +static void nvme_rdma_complete_timed_out(struct request *rq) +{ + struct nvme_rdma_request *req = blk_mq_rq_to_pdu(rq); + struct nvme_rdma_queue *queue = req->queue; + struct nvme_rdma_ctrl *ctrl = queue->ctrl; + + /* fence other contexts that may complete the command */ + mutex_lock(&ctrl->teardown_lock); + nvme_rdma_stop_queue(queue); + if (!blk_mq_request_completed(rq)) { + nvme_req(rq)->status = NVME_SC_HOST_ABORTED_CMD; + blk_mq_complete_request(rq); + } + mutex_unlock(&ctrl->teardown_lock); +} + static enum blk_eh_timer_return nvme_rdma_timeout(struct request *rq, bool reserved) { @@ -1714,29 +1731,29 @@ nvme_rdma_timeout(struct request *rq, bool reserved) dev_warn(ctrl->ctrl.device, "I/O %d QID %d timeout\n", rq->tag, nvme_rdma_queue_idx(queue)); - /* - * Restart the timer if a controller reset is already scheduled. Any - * timed out commands would be handled before entering the connecting - * state. - */ - if (ctrl->ctrl.state == NVME_CTRL_RESETTING) - return BLK_EH_RESET_TIMER; - if (ctrl->ctrl.state != NVME_CTRL_LIVE) { /* - * Teardown immediately if controller times out while starting - * or we are already started error recovery. all outstanding - * requests are completed on shutdown, so we return BLK_EH_DONE. + * If we are resetting, connecting or deleting we should + * complete immediately because we may block controller + * teardown or setup sequence + * - ctrl disable/shutdown fabrics requests + * - connect requests + * - initialization admin requests + * - I/O requests that entered after unquiescing and + * the controller stopped responding + * + * All other requests should be cancelled by the error + * recovery work, so it's fine that we fail it here. */ - flush_work(&ctrl->err_work); - nvme_rdma_teardown_io_queues(ctrl, false); - nvme_rdma_teardown_admin_queue(ctrl, false); + nvme_rdma_complete_timed_out(rq); return BLK_EH_DONE; } - dev_warn(ctrl->ctrl.device, "starting error recovery\n"); + /* + * LIVE state should trigger the normal error recovery which will + * handle completing this request. + */ nvme_rdma_error_recovery(ctrl); - return BLK_EH_RESET_TIMER; } From 068f73f767a1ed7f27f1eb48343a7bf2d88c1a58 Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Thu, 30 Jul 2020 13:42:42 -0700 Subject: [PATCH 060/130] nvme-rdma: fix reset hang if controller died in the middle of a reset [ Upstream commit 2362acb6785611eda795bfc12e1ea6b202ecf62c ] If the controller becomes unresponsive in the middle of a reset, we will hang because we are waiting for the freeze to complete, but that cannot happen since we have commands that are inflight holding the q_usage_counter, and we can't blindly fail requests that times out. So give a timeout and if we cannot wait for queue freeze before unfreezing, fail and have the error handling take care how to proceed (either schedule a reconnect of remove the controller). Reviewed-by: Christoph Hellwig Signed-off-by: Sagi Grimberg Signed-off-by: Sasha Levin --- drivers/nvme/host/rdma.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index 4e73da2c45bb..f0847f2bb117 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -899,7 +899,15 @@ static int nvme_rdma_configure_io_queues(struct nvme_rdma_ctrl *ctrl, bool new) if (!new) { nvme_start_queues(&ctrl->ctrl); - nvme_wait_freeze(&ctrl->ctrl); + if (!nvme_wait_freeze_timeout(&ctrl->ctrl, NVME_IO_TIMEOUT)) { + /* + * If we timed out waiting for freeze we are likely to + * be stuck. Fail the controller initialization just + * to be safe. + */ + ret = -ENODEV; + goto out_wait_freeze_timed_out; + } blk_mq_update_nr_hw_queues(ctrl->ctrl.tagset, ctrl->ctrl.queue_count - 1); nvme_unfreeze(&ctrl->ctrl); @@ -907,6 +915,9 @@ static int nvme_rdma_configure_io_queues(struct nvme_rdma_ctrl *ctrl, bool new) return 0; +out_wait_freeze_timed_out: + nvme_stop_queues(&ctrl->ctrl); + nvme_rdma_stop_io_queues(ctrl); out_cleanup_connect_q: if (new) blk_cleanup_queue(ctrl->ctrl.connect_q); From 9eef311eb5244fa629fbc32dcad790f3457af008 Mon Sep 17 00:00:00 2001 From: Tong Zhang Date: Fri, 28 Aug 2020 10:17:08 -0400 Subject: [PATCH 061/130] nvme-pci: cancel nvme device request before disabling [ Upstream commit 7ad92f656bddff4cf8f641e0e3b1acd4eb9644cb ] This patch addresses an irq free warning and null pointer dereference error problem when nvme devices got timeout error during initialization. This problem happens when nvme_timeout() function is called while nvme_reset_work() is still in execution. This patch fixed the problem by setting flag of the problematic request to NVME_REQ_CANCELLED before calling nvme_dev_disable() to make sure __nvme_submit_sync_cmd() returns an error code and let nvme_submit_sync_cmd() fail gracefully. The following is console output. [ 62.472097] nvme nvme0: I/O 13 QID 0 timeout, disable controller [ 62.488796] nvme nvme0: could not set timestamp (881) [ 62.494888] ------------[ cut here ]------------ [ 62.495142] Trying to free already-free IRQ 11 [ 62.495366] WARNING: CPU: 0 PID: 7 at kernel/irq/manage.c:1751 free_irq+0x1f7/0x370 [ 62.495742] Modules linked in: [ 62.495902] CPU: 0 PID: 7 Comm: kworker/u4:0 Not tainted 5.8.0+ #8 [ 62.496206] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-48-gd9c812dda519-p4 [ 62.496772] Workqueue: nvme-reset-wq nvme_reset_work [ 62.497019] RIP: 0010:free_irq+0x1f7/0x370 [ 62.497223] Code: e8 ce 49 11 00 48 83 c4 08 4c 89 e0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 44 89 f6 48 c70 [ 62.498133] RSP: 0000:ffffa96800043d40 EFLAGS: 00010086 [ 62.498391] RAX: 0000000000000000 RBX: ffff9b87fc458400 RCX: 0000000000000000 [ 62.498741] RDX: 0000000000000001 RSI: 0000000000000096 RDI: ffffffff9693d72c [ 62.499091] RBP: ffff9b87fd4c8f60 R08: ffffa96800043bfd R09: 0000000000000163 [ 62.499440] R10: ffffa96800043bf8 R11: ffffa96800043bfd R12: ffff9b87fd4c8e00 [ 62.499790] R13: ffff9b87fd4c8ea4 R14: 000000000000000b R15: ffff9b87fd76b000 [ 62.500140] FS: 0000000000000000(0000) GS:ffff9b87fdc00000(0000) knlGS:0000000000000000 [ 62.500534] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 62.500816] CR2: 0000000000000000 CR3: 000000003aa0a000 CR4: 00000000000006f0 [ 62.501165] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 62.501515] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 62.501864] Call Trace: [ 62.501993] pci_free_irq+0x13/0x20 [ 62.502167] nvme_reset_work+0x5d0/0x12a0 [ 62.502369] ? update_load_avg+0x59/0x580 [ 62.502569] ? ttwu_queue_wakelist+0xa8/0xc0 [ 62.502780] ? try_to_wake_up+0x1a2/0x450 [ 62.502979] process_one_work+0x1d2/0x390 [ 62.503179] worker_thread+0x45/0x3b0 [ 62.503361] ? process_one_work+0x390/0x390 [ 62.503568] kthread+0xf9/0x130 [ 62.503726] ? kthread_park+0x80/0x80 [ 62.503911] ret_from_fork+0x22/0x30 [ 62.504090] ---[ end trace de9ed4a70f8d71e2 ]--- [ 123.912275] nvme nvme0: I/O 12 QID 0 timeout, disable controller [ 123.914670] nvme nvme0: 1/0/0 default/read/poll queues [ 123.916310] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 123.917469] #PF: supervisor write access in kernel mode [ 123.917725] #PF: error_code(0x0002) - not-present page [ 123.917976] PGD 0 P4D 0 [ 123.918109] Oops: 0002 [#1] SMP PTI [ 123.918283] CPU: 0 PID: 7 Comm: kworker/u4:0 Tainted: G W 5.8.0+ #8 [ 123.918650] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-48-gd9c812dda519-p4 [ 123.919219] Workqueue: nvme-reset-wq nvme_reset_work [ 123.919469] RIP: 0010:__blk_mq_alloc_map_and_request+0x21/0x80 [ 123.919757] Code: 66 0f 1f 84 00 00 00 00 00 41 55 41 54 55 48 63 ee 53 48 8b 47 68 89 ee 48 89 fb 8b4 [ 123.920657] RSP: 0000:ffffa96800043d40 EFLAGS: 00010286 [ 123.920912] RAX: ffff9b87fc4fee40 RBX: ffff9b87fc8cb008 RCX: 0000000000000000 [ 123.921258] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9b87fc618000 [ 123.921602] RBP: 0000000000000000 R08: ffff9b87fdc2c4a0 R09: ffff9b87fc616000 [ 123.921949] R10: 0000000000000000 R11: ffff9b87fffd1500 R12: 0000000000000000 [ 123.922295] R13: 0000000000000000 R14: ffff9b87fc8cb200 R15: ffff9b87fc8cb000 [ 123.922641] FS: 0000000000000000(0000) GS:ffff9b87fdc00000(0000) knlGS:0000000000000000 [ 123.923032] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 123.923312] CR2: 0000000000000000 CR3: 000000003aa0a000 CR4: 00000000000006f0 [ 123.923660] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 123.924007] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 123.924353] Call Trace: [ 123.924479] blk_mq_alloc_tag_set+0x137/0x2a0 [ 123.924694] nvme_reset_work+0xed6/0x12a0 [ 123.924898] process_one_work+0x1d2/0x390 [ 123.925099] worker_thread+0x45/0x3b0 [ 123.925280] ? process_one_work+0x390/0x390 [ 123.925486] kthread+0xf9/0x130 [ 123.925642] ? kthread_park+0x80/0x80 [ 123.925825] ret_from_fork+0x22/0x30 [ 123.926004] Modules linked in: [ 123.926158] CR2: 0000000000000000 [ 123.926322] ---[ end trace de9ed4a70f8d71e3 ]--- [ 123.926549] RIP: 0010:__blk_mq_alloc_map_and_request+0x21/0x80 [ 123.926832] Code: 66 0f 1f 84 00 00 00 00 00 41 55 41 54 55 48 63 ee 53 48 8b 47 68 89 ee 48 89 fb 8b4 [ 123.927734] RSP: 0000:ffffa96800043d40 EFLAGS: 00010286 [ 123.927989] RAX: ffff9b87fc4fee40 RBX: ffff9b87fc8cb008 RCX: 0000000000000000 [ 123.928336] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9b87fc618000 [ 123.928679] RBP: 0000000000000000 R08: ffff9b87fdc2c4a0 R09: ffff9b87fc616000 [ 123.929025] R10: 0000000000000000 R11: ffff9b87fffd1500 R12: 0000000000000000 [ 123.929370] R13: 0000000000000000 R14: ffff9b87fc8cb200 R15: ffff9b87fc8cb000 [ 123.929715] FS: 0000000000000000(0000) GS:ffff9b87fdc00000(0000) knlGS:0000000000000000 [ 123.930106] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 123.930384] CR2: 0000000000000000 CR3: 000000003aa0a000 CR4: 00000000000006f0 [ 123.930731] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 123.931077] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Co-developed-by: Keith Busch Signed-off-by: Tong Zhang Reviewed-by: Keith Busch Signed-off-by: Sagi Grimberg Signed-off-by: Sasha Levin --- drivers/nvme/host/pci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 100da11ce98c..a91433bdf5de 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -1274,8 +1274,8 @@ static enum blk_eh_timer_return nvme_timeout(struct request *req, bool reserved) dev_warn_ratelimited(dev->ctrl.device, "I/O %d QID %d timeout, disable controller\n", req->tag, nvmeq->qid); - nvme_dev_disable(dev, true); nvme_req(req)->flags |= NVME_REQ_CANCELLED; + nvme_dev_disable(dev, true); return BLK_EH_DONE; case NVME_CTRL_RESETTING: return BLK_EH_RESET_TIMER; @@ -1292,10 +1292,10 @@ static enum blk_eh_timer_return nvme_timeout(struct request *req, bool reserved) dev_warn(dev->ctrl.device, "I/O %d QID %d timeout, reset controller\n", req->tag, nvmeq->qid); + nvme_req(req)->flags |= NVME_REQ_CANCELLED; nvme_dev_disable(dev, false); nvme_reset_ctrl(&dev->ctrl); - nvme_req(req)->flags |= NVME_REQ_CANCELLED; return BLK_EH_DONE; } From 52fa4a63ab146d7aba2c086db0b4c372295fad8e Mon Sep 17 00:00:00 2001 From: Nirenjan Krishnan Date: Sun, 30 Aug 2020 17:48:59 -0700 Subject: [PATCH 062/130] HID: quirks: Set INCREMENT_USAGE_ON_DUPLICATE for all Saitek X52 devices [ Upstream commit 77df710ba633dfb6c65c65cf99ea9e084a1c9933 ] The Saitek X52 family of joysticks has a pair of axes that were originally (by the Windows driver) used as mouse pointer controls. The corresponding usage page is the Game Controls page, which is not recognized by the generic HID driver, and therefore, both axes get mapped to ABS_MISC. The quirk makes the second axis get mapped to ABS_MISC+1, and therefore made available separately. One Saitek X52 device is already fixed. This patch fixes the other two known devices with VID/PID 06a3:0255 and 06a3:0762. Signed-off-by: Nirenjan Krishnan Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin --- drivers/hid/hid-ids.h | 2 ++ drivers/hid/hid-quirks.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index fbc93d8dda5e..076c20a7a654 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -1011,6 +1011,8 @@ #define USB_DEVICE_ID_SAITEK_RAT9 0x0cfa #define USB_DEVICE_ID_SAITEK_MMO7 0x0cd0 #define USB_DEVICE_ID_SAITEK_X52 0x075c +#define USB_DEVICE_ID_SAITEK_X52_2 0x0255 +#define USB_DEVICE_ID_SAITEK_X52_PRO 0x0762 #define USB_VENDOR_ID_SAMSUNG 0x0419 #define USB_DEVICE_ID_SAMSUNG_IR_REMOTE 0x0001 diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index 8a739ec50cc0..0440e2f6e8a3 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -150,6 +150,8 @@ static const struct hid_device_id hid_quirks[] = { { HID_USB_DEVICE(USB_VENDOR_ID_RETROUSB, USB_DEVICE_ID_RETROUSB_SNES_RETROPORT), HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE }, { HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RUMBLEPAD), HID_QUIRK_BADPAD }, { HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_X52), HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE }, + { HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_X52_2), HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE }, + { HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_X52_PRO), HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE }, { HID_USB_DEVICE(USB_VENDOR_ID_SEMICO, USB_DEVICE_ID_SEMICO_USB_KEYKOARD2), HID_QUIRK_NO_INIT_REPORTS }, { HID_USB_DEVICE(USB_VENDOR_ID_SEMICO, USB_DEVICE_ID_SEMICO_USB_KEYKOARD), HID_QUIRK_NO_INIT_REPORTS }, { HID_USB_DEVICE(USB_VENDOR_ID_SENNHEISER, USB_DEVICE_ID_SENNHEISER_BTD500USB), HID_QUIRK_NOGET }, From 052750976d035d279d3d0bbf4ba6b4d7a444dd56 Mon Sep 17 00:00:00 2001 From: Nicholas Miell Date: Fri, 28 Aug 2020 21:14:29 -0700 Subject: [PATCH 063/130] HID: microsoft: Add rumble support for the 8bitdo SN30 Pro+ controller [ Upstream commit 724a419ea28f7514a391e80040230f69cf626707 ] When operating in XInput mode, the 8bitdo SN30 Pro+ requires the same quirk as the official Xbox One Bluetooth controllers for rumble to function. Other controllers like the N30 Pro 2, SF30 Pro, SN30 Pro, etc. probably also need this quirk, but I do not have the hardware to test. Signed-off-by: Nicholas Miell Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin --- drivers/hid/hid-ids.h | 1 + drivers/hid/hid-microsoft.c | 2 ++ 2 files changed, 3 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 076c20a7a654..e03a4d794240 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -846,6 +846,7 @@ #define USB_DEVICE_ID_MS_POWER_COVER 0x07da #define USB_DEVICE_ID_MS_XBOX_ONE_S_CONTROLLER 0x02fd #define USB_DEVICE_ID_MS_PIXART_MOUSE 0x00cb +#define USB_DEVICE_ID_8BITDO_SN30_PRO_PLUS 0x02e0 #define USB_VENDOR_ID_MOJO 0x8282 #define USB_DEVICE_ID_RETRO_ADAPTER 0x3201 diff --git a/drivers/hid/hid-microsoft.c b/drivers/hid/hid-microsoft.c index 2d8b589201a4..8cb1ca1936e4 100644 --- a/drivers/hid/hid-microsoft.c +++ b/drivers/hid/hid-microsoft.c @@ -451,6 +451,8 @@ static const struct hid_device_id ms_devices[] = { .driver_data = MS_SURFACE_DIAL }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_XBOX_ONE_S_CONTROLLER), .driver_data = MS_QUIRK_FF }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_8BITDO_SN30_PRO_PLUS), + .driver_data = MS_QUIRK_FF }, { } }; MODULE_DEVICE_TABLE(hid, ms_devices); From bc818ce2d51ec9bc04a7a4bb8a07cd0893e85cfb Mon Sep 17 00:00:00 2001 From: Xie He Date: Fri, 28 Aug 2020 00:07:52 -0700 Subject: [PATCH 064/130] drivers/net/wan/hdlc_cisco: Add hard_header_len [ Upstream commit 1a545ebe380bf4c1433e3c136e35a77764fda5ad ] This driver didn't set hard_header_len. This patch sets hard_header_len for it according to its header_ops->create function. This driver's header_ops->create function (cisco_hard_header) creates a header of (struct hdlc_header), so hard_header_len should be set to sizeof(struct hdlc_header). Cc: Martin Schiller Signed-off-by: Xie He Acked-by: Krzysztof Halasa Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/wan/hdlc_cisco.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c index a030f5aa6b95..cc33441af469 100644 --- a/drivers/net/wan/hdlc_cisco.c +++ b/drivers/net/wan/hdlc_cisco.c @@ -370,6 +370,7 @@ static int cisco_ioctl(struct net_device *dev, struct ifreq *ifr) memcpy(&state(hdlc)->settings, &new_settings, size); spin_lock_init(&state(hdlc)->lock); dev->header_ops = &cisco_header_ops; + dev->hard_header_len = sizeof(struct hdlc_header); dev->type = ARPHRD_CISCO; call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE, dev); netif_dormant_on(dev); From 82d4cfa185a93456c5c279b79f80af4f1319854c Mon Sep 17 00:00:00 2001 From: Dinghao Liu Date: Mon, 31 Aug 2020 17:06:43 +0800 Subject: [PATCH 065/130] HID: elan: Fix memleak in elan_input_configured [ Upstream commit b7429ea53d6c0936a0f10a5d64164f0aea440143 ] When input_mt_init_slots() fails, input should be freed to prevent memleak. When input_register_device() fails, we should call input_mt_destroy_slots() to free memory allocated by input_mt_init_slots(). Signed-off-by: Dinghao Liu Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin --- drivers/hid/hid-elan.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/hid/hid-elan.c b/drivers/hid/hid-elan.c index 45c4f888b7c4..dae193749d44 100644 --- a/drivers/hid/hid-elan.c +++ b/drivers/hid/hid-elan.c @@ -188,6 +188,7 @@ static int elan_input_configured(struct hid_device *hdev, struct hid_input *hi) ret = input_mt_init_slots(input, ELAN_MAX_FINGERS, INPUT_MT_POINTER); if (ret) { hid_err(hdev, "Failed to init elan MT slots: %d\n", ret); + input_free_device(input); return ret; } @@ -198,6 +199,7 @@ static int elan_input_configured(struct hid_device *hdev, struct hid_input *hi) if (ret) { hid_err(hdev, "Failed to register elan input device: %d\n", ret); + input_mt_destroy_slots(input); input_free_device(input); return ret; } From b011e41a8e48d3618332ae81e46581cf39a86142 Mon Sep 17 00:00:00 2001 From: Evgeniy Didin Date: Tue, 7 Jul 2020 18:38:58 +0300 Subject: [PATCH 066/130] ARC: [plat-hsdk]: Switch ethernet phy-mode to rgmii-id [ Upstream commit 26907eb605fbc3ba9dbf888f21d9d8d04471271d ] HSDK board has Micrel KSZ9031, recent commit bcf3440c6dd ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") caused a breakdown of Ethernet. Using 'phy-mode = "rgmii"' is not correct because accodring RGMII specification it is necessary to have delay on RX (PHY to MAX) which is not generated in case of "rgmii". Using "rgmii-id" adds necessary delay and solves the issue. Also adding name of PHY placed on HSDK board. Signed-off-by: Evgeniy Didin Cc: Eugeniy Paltsev Cc: Alexey Brodkin Signed-off-by: Vineet Gupta Signed-off-by: Sasha Levin --- arch/arc/boot/dts/hsdk.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts index 5d64a5a940ee..dcaa44e408ac 100644 --- a/arch/arc/boot/dts/hsdk.dts +++ b/arch/arc/boot/dts/hsdk.dts @@ -210,7 +210,7 @@ reg = <0x8000 0x2000>; interrupts = <10>; interrupt-names = "macirq"; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; snps,pbl = <32>; snps,multicast-filter-bins = <256>; clocks = <&gmacclk>; @@ -228,7 +228,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "snps,dwmac-mdio"; - phy0: ethernet-phy@0 { + phy0: ethernet-phy@0 { /* Micrel KSZ9031 */ reg = <0>; }; }; From 1f1169474803f46fe797eb5c3807c69575db5454 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 20 Aug 2020 17:40:02 +0200 Subject: [PATCH 067/130] cpufreq: intel_pstate: Refuse to turn off with HWP enabled [ Upstream commit 43298db3009f06fe5c69e1ca8b6cfc2565772fa1 ] After commit f6ebbcf08f37 ("cpufreq: intel_pstate: Implement passive mode with HWP enabled") it is possible to change the driver status to "off" via sysfs with HWP enabled, which effectively causes the driver to unregister itself, but HWP remains active and it forces the minimum performance, so even if another cpufreq driver is loaded, it will not be able to control the CPU frequency. For this reason, make the driver refuse to change the status to "off" with HWP enabled. Signed-off-by: Rafael J. Wysocki Acked-by: Srinivas Pandruvada Signed-off-by: Sasha Levin --- drivers/cpufreq/intel_pstate.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 927eb3fd2366..5bad88f6ddd5 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -2533,9 +2533,15 @@ static int intel_pstate_update_status(const char *buf, size_t size) { int ret; - if (size == 3 && !strncmp(buf, "off", size)) - return intel_pstate_driver ? - intel_pstate_unregister_driver() : -EINVAL; + if (size == 3 && !strncmp(buf, "off", size)) { + if (!intel_pstate_driver) + return -EINVAL; + + if (hwp_active) + return -EBUSY; + + return intel_pstate_unregister_driver(); + } if (size == 6 && !strncmp(buf, "active", size)) { if (intel_pstate_driver) { From 2423f3a7ef524d04952ddf85affb3f6264a7a6bb Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Mon, 31 Aug 2020 20:02:50 -0700 Subject: [PATCH 068/130] cpufreq: intel_pstate: Fix intel_pstate_get_hwp_max() for turbo disabled [ Upstream commit eacc9c5a927e474c173a5d53dd7fb8e306511768 ] This fixes the behavior of the scaling_max_freq and scaling_min_freq sysfs files in systems which had turbo disabled by the BIOS. Caleb noticed that the HWP is programmed to operate in the wrong P-state range on his system when the CPUFREQ policy min/max frequency is set via sysfs. This seems to be because in his system intel_pstate_get_hwp_max() is returning the maximum turbo P-state even though turbo was disabled by the BIOS, which causes intel_pstate to scale kHz frequencies incorrectly e.g. setting the maximum turbo frequency whenever the maximum guaranteed frequency is requested via sysfs. Tested-by: Caleb Callaway Signed-off-by: Francisco Jerez Acked-by: Srinivas Pandruvada [ rjw: Minor subject edits ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin --- drivers/cpufreq/intel_pstate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 5bad88f6ddd5..b9ca89dc75c7 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -762,7 +762,7 @@ static void intel_pstate_get_hwp_max(unsigned int cpu, int *phy_max, rdmsrl_on_cpu(cpu, MSR_HWP_CAPABILITIES, &cap); WRITE_ONCE(all_cpu_data[cpu]->hwp_cap_cached, cap); - if (global.no_turbo) + if (global.no_turbo || global.turbo_disabled) *current_max = HWP_GUARANTEED_PERF(cap); else *current_max = HWP_HIGHEST_PERF(cap); From ff37a2636464e8c4fe320d281b6ad220f14eb46a Mon Sep 17 00:00:00 2001 From: Jessica Yu Date: Tue, 1 Sep 2020 18:00:16 +0200 Subject: [PATCH 069/130] arm64/module: set trampoline section flags regardless of CONFIG_DYNAMIC_FTRACE [ Upstream commit e0328feda79d9681b3e3245e6e180295550c8ee9 ] In the arm64 module linker script, the section .text.ftrace_trampoline is specified unconditionally regardless of whether CONFIG_DYNAMIC_FTRACE is enabled (this is simply due to the limitation that module linker scripts are not preprocessed like the vmlinux one). Normally, for .plt and .text.ftrace_trampoline, the section flags present in the module binary wouldn't matter since module_frob_arch_sections() would assign them manually anyway. However, the arm64 module loader only sets the section flags for .text.ftrace_trampoline when CONFIG_DYNAMIC_FTRACE=y. That's only become problematic recently due to a recent change in binutils-2.35, where the .text.ftrace_trampoline section (along with the .plt section) is now marked writable and executable (WAX). We no longer allow writable and executable sections to be loaded due to commit 5c3a7db0c7ec ("module: Harden STRICT_MODULE_RWX"), so this is causing all modules linked with binutils-2.35 to be rejected under arm64. Drop the IS_ENABLED(CONFIG_DYNAMIC_FTRACE) check in module_frob_arch_sections() so that the section flags for .text.ftrace_trampoline get properly set to SHF_EXECINSTR|SHF_ALLOC, without SHF_WRITE. Signed-off-by: Jessica Yu Acked-by: Will Deacon Acked-by: Ard Biesheuvel Link: http://lore.kernel.org/r/20200831094651.GA16385@linux-8ccs Link: https://lore.kernel.org/r/20200901160016.3646-1-jeyu@kernel.org Signed-off-by: Catalin Marinas Signed-off-by: Sasha Levin --- arch/arm64/kernel/module-plts.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm64/kernel/module-plts.c b/arch/arm64/kernel/module-plts.c index b182442b87a3..426018ebb700 100644 --- a/arch/arm64/kernel/module-plts.c +++ b/arch/arm64/kernel/module-plts.c @@ -270,8 +270,7 @@ int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs, mod->arch.core.plt_shndx = i; else if (!strcmp(secstrings + sechdrs[i].sh_name, ".init.plt")) mod->arch.init.plt_shndx = i; - else if (IS_ENABLED(CONFIG_DYNAMIC_FTRACE) && - !strcmp(secstrings + sechdrs[i].sh_name, + else if (!strcmp(secstrings + sechdrs[i].sh_name, ".text.ftrace_trampoline")) tramp = sechdrs + i; else if (sechdrs[i].sh_type == SHT_SYMTAB) From 56117aa693016b39e6928f1e0f3ecbaaaa4c2555 Mon Sep 17 00:00:00 2001 From: Rander Wang Date: Wed, 2 Sep 2020 18:42:07 +0300 Subject: [PATCH 070/130] ALSA: hda: hdmi - add Rocketlake support [ Upstream commit f804a324a41a880c1ab43cc5145d8b3e5790430d ] Add Rocketlake HDMI codec support. Rocketlake shares the pin-to-port mapping table with Tigerlake. Signed-off-by: Rander Wang Reviewed-by: Pierre-Louis Bossart Reviewed-by: Ranjani Sridharan Signed-off-by: Kai Vehmanen Link: https://lore.kernel.org/r/20200902154207.1440393-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin --- sound/pci/hda/patch_hdmi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index e4e228c095f0..51798632d334 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -4205,6 +4205,7 @@ HDA_CODEC_ENTRY(0x8086280c, "Cannonlake HDMI", patch_i915_glk_hdmi), HDA_CODEC_ENTRY(0x8086280d, "Geminilake HDMI", patch_i915_glk_hdmi), HDA_CODEC_ENTRY(0x8086280f, "Icelake HDMI", patch_i915_icl_hdmi), HDA_CODEC_ENTRY(0x80862812, "Tigerlake HDMI", patch_i915_tgl_hdmi), +HDA_CODEC_ENTRY(0x80862816, "Rocketlake HDMI", patch_i915_tgl_hdmi), HDA_CODEC_ENTRY(0x8086281a, "Jasperlake HDMI", patch_i915_icl_hdmi), HDA_CODEC_ENTRY(0x80862880, "CedarTrail HDMI", patch_generic_hdmi), HDA_CODEC_ENTRY(0x80862882, "Valleyview2 HDMI", patch_i915_byt_hdmi), From d6ccea92b1e119d8ec0b47a8548e76b7ff2046f7 Mon Sep 17 00:00:00 2001 From: Rander Wang Date: Wed, 2 Sep 2020 18:42:18 +0300 Subject: [PATCH 071/130] ALSA: hda: fix a runtime pm issue in SOF when integrated GPU is disabled [ Upstream commit 13774d81f38538c5fa2924bdcdfa509155480fa6 ] In snd_hdac_device_init pm_runtime_set_active is called to increase child_count in parent device. But when it is failed to build connection with GPU for one case that integrated graphic gpu is disabled, snd_hdac_ext_bus_device_exit will be invoked to clean up a HD-audio extended codec base device. At this time the child_count of parent is not decreased, which makes parent device can't get suspended. This patch calls pm_runtime_set_suspended to decrease child_count in parent device in snd_hdac_device_exit to match with snd_hdac_device_init. pm_runtime_set_suspended can make sure that it will not decrease child_count if the device is already suspended. Signed-off-by: Rander Wang Reviewed-by: Ranjani Sridharan Reviewed-by: Pierre-Louis Bossart Reviewed-by: Bard Liao Reviewed-by: Guennadi Liakhovetski Signed-off-by: Kai Vehmanen Link: https://lore.kernel.org/r/20200902154218.1440441-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin --- sound/hda/hdac_device.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/hda/hdac_device.c b/sound/hda/hdac_device.c index c946fd8beebc..b84e12f4f804 100644 --- a/sound/hda/hdac_device.c +++ b/sound/hda/hdac_device.c @@ -127,6 +127,8 @@ EXPORT_SYMBOL_GPL(snd_hdac_device_init); void snd_hdac_device_exit(struct hdac_device *codec) { pm_runtime_put_noidle(&codec->dev); + /* keep balance of runtime PM child_count in parent device */ + pm_runtime_set_suspended(&codec->dev); snd_hdac_bus_remove_device(codec->bus, codec); kfree(codec->vendor_name); kfree(codec->chip_name); From cab731c6c873aac2a478659c0880674b44a0e5cb Mon Sep 17 00:00:00 2001 From: Sandeep Raghuraman Date: Thu, 27 Aug 2020 18:43:37 +0530 Subject: [PATCH 072/130] drm/amdgpu: Fix bug in reporting voltage for CIK [ Upstream commit d98299885c9ea140c1108545186593deba36c4ac ] On my R9 390, the voltage was reported as a constant 1000 mV. This was due to a bug in smu7_hwmgr.c, in the smu7_read_sensor() function, where some magic constants were used in a condition, to determine whether the voltage should be read from PLANE2_VID or PLANE1_VID. The VDDC mask was incorrectly used, instead of the VDDGFX mask. This patch changes the code to use the correct defined constants (and apply the correct bitshift), thus resulting in correct voltage reporting. Signed-off-by: Sandeep Raghuraman Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin --- drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index e6da53e9c3f4..3a2a1dc9a786 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -3575,7 +3575,8 @@ static int smu7_read_sensor(struct pp_hwmgr *hwmgr, int idx, case AMDGPU_PP_SENSOR_GPU_POWER: return smu7_get_gpu_power(hwmgr, (uint32_t *)value); case AMDGPU_PP_SENSOR_VDDGFX: - if ((data->vr_config & 0xff) == 0x2) + if ((data->vr_config & VRCONF_VDDGFX_MASK) == + (VR_SVI2_PLANE_2 << VRCONF_VDDGFX_SHIFT)) val_vid = PHM_READ_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, PWR_SVI2_STATUS, PLANE2_VID); else From 104bc6027b27ddde516167df7add650789b06968 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Mon, 24 Aug 2020 12:54:15 +0200 Subject: [PATCH 073/130] iommu/amd: Do not use IOMMUv2 functionality when SME is active [ Upstream commit 2822e582501b65707089b097e773e6fd70774841 ] When memory encryption is active the device is likely not in a direct mapped domain. Forbid using IOMMUv2 functionality for now until finer grained checks for this have been implemented. Signed-off-by: Joerg Roedel Link: https://lore.kernel.org/r/20200824105415.21000-3-joro@8bytes.org Signed-off-by: Joerg Roedel Signed-off-by: Sasha Levin --- drivers/iommu/amd_iommu_v2.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/iommu/amd_iommu_v2.c b/drivers/iommu/amd_iommu_v2.c index d6d85debd01b..05f3d93cf480 100644 --- a/drivers/iommu/amd_iommu_v2.c +++ b/drivers/iommu/amd_iommu_v2.c @@ -741,6 +741,13 @@ int amd_iommu_init_device(struct pci_dev *pdev, int pasids) might_sleep(); + /* + * When memory encryption is active the device is likely not in a + * direct-mapped domain. Forbid using IOMMUv2 functionality for now. + */ + if (mem_encrypt_active()) + return -ENODEV; + if (!amd_iommu_v2_supported()) return -ENODEV; From d4bdcf4f1154fbb4813f6147b0863bc9b2ab8881 Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Fri, 4 Sep 2020 18:58:08 +0300 Subject: [PATCH 074/130] gcov: Disable gcov build with GCC 10 [ Upstream commit cfc905f158eaa099d6258031614d11869e7ef71c ] GCOV built with GCC 10 doesn't initialize n_function variable. This produces different kernel panics as was seen by Colin in Ubuntu and me in FC 32. As a workaround, let's disable GCOV build for broken GCC 10 version. Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1891288 Link: https://lore.kernel.org/lkml/20200827133932.3338519-1-leon@kernel.org Link: https://lore.kernel.org/lkml/CAHk-=whbijeSdSvx-Xcr0DPMj0BiwhJ+uiNnDSVZcr_h_kg7UA@mail.gmail.com/ Cc: Colin Ian King Signed-off-by: Leon Romanovsky Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin --- kernel/gcov/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/gcov/Kconfig b/kernel/gcov/Kconfig index 3941a9c48f83..005d8b851bc1 100644 --- a/kernel/gcov/Kconfig +++ b/kernel/gcov/Kconfig @@ -4,6 +4,7 @@ menu "GCOV-based kernel profiling" config GCOV_KERNEL bool "Enable gcov-based kernel profiling" depends on DEBUG_FS + depends on !CC_IS_GCC || GCC_VERSION < 100000 select CONSTRUCTORS if !UML default n ---help--- From c71e70a85b4b91978b5b92c1918eba9871744d43 Mon Sep 17 00:00:00 2001 From: Maxim Kochetkov Date: Mon, 3 Aug 2020 08:04:05 +0300 Subject: [PATCH 075/130] iio: adc: ti-ads1015: fix conversion when CONFIG_PM is not set commit e71e6dbe96ac80ac2aebe71a6a942e7bd60e7596 upstream. To stop conversion ads1015_set_power_state() function call unimplemented function __pm_runtime_suspend() from pm_runtime_put_autosuspend() if CONFIG_PM is not set. In case of CONFIG_PM is not set: __pm_runtime_suspend() returns -ENOSYS, so ads1015_read_raw() failed because ads1015_set_power_state() returns an error. If CONFIG_PM is disabled, there is no need to start/stop conversion. Fix it by adding return 0 function variant if CONFIG_PM is not set. Signed-off-by: Maxim Kochetkov Fixes: ecc24e72f437 ("iio: adc: Add TI ADS1015 ADC driver support") Tested-by: Maxim Kiselev Reviewed-by: Andy Shevchenko Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- drivers/iio/adc/ti-ads1015.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/iio/adc/ti-ads1015.c b/drivers/iio/adc/ti-ads1015.c index a550b132cfb7..871690a47661 100644 --- a/drivers/iio/adc/ti-ads1015.c +++ b/drivers/iio/adc/ti-ads1015.c @@ -309,6 +309,7 @@ static const struct iio_chan_spec ads1115_channels[] = { IIO_CHAN_SOFT_TIMESTAMP(ADS1015_TIMESTAMP), }; +#ifdef CONFIG_PM static int ads1015_set_power_state(struct ads1015_data *data, bool on) { int ret; @@ -326,6 +327,15 @@ static int ads1015_set_power_state(struct ads1015_data *data, bool on) return ret < 0 ? ret : 0; } +#else /* !CONFIG_PM */ + +static int ads1015_set_power_state(struct ads1015_data *data, bool on) +{ + return 0; +} + +#endif /* !CONFIG_PM */ + static int ads1015_get_adc_result(struct ads1015_data *data, int chan, int *val) { From c80210735f31f4030988ca304326024199d064c1 Mon Sep 17 00:00:00 2001 From: Gwendal Grignou Date: Tue, 28 Jul 2020 13:48:25 -0700 Subject: [PATCH 076/130] iio: cros_ec: Set Gyroscope default frequency to 25Hz commit 336306790b2bbf7ce837625fa3b24ba724d05838 upstream. BMI160 Minimium gyroscope frequency in normal mode is 25Hz. When older EC firmware do not report their sensors frequencies, use 25Hz as the minimum for gyroscope to be sure it works on BMI160. Fixes: ae7b02ad2f32d ("iio: common: cros_ec_sensors: Expose cros_ec_sensors frequency range via iio sysfs") Signed-off-by: Gwendal Grignou Reviewed-by: Enric Balletbo i Serra Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c index d2609e6feda4..b4f394f05863 100644 --- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c @@ -57,10 +57,13 @@ static void get_default_min_max_freq(enum motionsensor_type type, { switch (type) { case MOTIONSENSE_TYPE_ACCEL: - case MOTIONSENSE_TYPE_GYRO: *min_freq = 12500; *max_freq = 100000; break; + case MOTIONSENSE_TYPE_GYRO: + *min_freq = 25000; + *max_freq = 100000; + break; case MOTIONSENSE_TYPE_MAG: *min_freq = 5000; *max_freq = 25000; From 0616d908aef522884608fba3d14431a052ad87f4 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Wed, 22 Jul 2020 16:50:48 +0100 Subject: [PATCH 077/130] iio:light:ltr501 Fix timestamp alignment issue. commit 2684d5003490df5398aeafe2592ba9d4a4653998 upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. Here we use a structure on the stack. The driver already did an explicit memset so no data leak was possible. Forced alignment of ts is not strictly necessary but probably makes the code slightly less fragile. Note there has been some rework in this driver of the years, so no way this will apply cleanly all the way back. Fixes: 2690be905123 ("iio: Add Lite-On ltr501 ambient light / proximity sensor driver") Reported-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron Reviewed-by: Andy Shevchenko Cc: Signed-off-by: Greg Kroah-Hartman --- drivers/iio/light/ltr501.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/iio/light/ltr501.c b/drivers/iio/light/ltr501.c index 71f99d2a22c1..ceddb6a3b61b 100644 --- a/drivers/iio/light/ltr501.c +++ b/drivers/iio/light/ltr501.c @@ -1242,13 +1242,16 @@ static irqreturn_t ltr501_trigger_handler(int irq, void *p) struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; struct ltr501_data *data = iio_priv(indio_dev); - u16 buf[8]; + struct { + u16 channels[3]; + s64 ts __aligned(8); + } scan; __le16 als_buf[2]; u8 mask = 0; int j = 0; int ret, psdata; - memset(buf, 0, sizeof(buf)); + memset(&scan, 0, sizeof(scan)); /* figure out which data needs to be ready */ if (test_bit(0, indio_dev->active_scan_mask) || @@ -1267,9 +1270,9 @@ static irqreturn_t ltr501_trigger_handler(int irq, void *p) if (ret < 0) return ret; if (test_bit(0, indio_dev->active_scan_mask)) - buf[j++] = le16_to_cpu(als_buf[1]); + scan.channels[j++] = le16_to_cpu(als_buf[1]); if (test_bit(1, indio_dev->active_scan_mask)) - buf[j++] = le16_to_cpu(als_buf[0]); + scan.channels[j++] = le16_to_cpu(als_buf[0]); } if (mask & LTR501_STATUS_PS_RDY) { @@ -1277,10 +1280,10 @@ static irqreturn_t ltr501_trigger_handler(int irq, void *p) &psdata, 2); if (ret < 0) goto done; - buf[j++] = psdata & LTR501_PS_DATA_MASK; + scan.channels[j++] = psdata & LTR501_PS_DATA_MASK; } - iio_push_to_buffers_with_timestamp(indio_dev, buf, + iio_push_to_buffers_with_timestamp(indio_dev, &scan, iio_get_time_ns(indio_dev)); done: From 66b8b8f75e3541d002f3c16f5fabbfafd4552120 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Wed, 22 Jul 2020 16:50:42 +0100 Subject: [PATCH 078/130] iio:proximity:mb1232: Fix timestamp alignment and prevent data leak. commit f60e8bb84282b8e633956cfe74b4f0d64ca73cec upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses a 16 byte s16 array on the stack As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data with alignment ensured by use of an explicit c structure. This data is allocated with kzalloc so no data can leak appart from previous readings. In this case the forced alignment of the ts is necessary to ensure correct padding on x86_32 where the s64 would only be 4 byte aligned. Fixes: 16b05261537e ("mb1232.c: add distance iio sensor with i2c") Reported-by: Lars-Peter Clausen Cc: Andreas Klinger Signed-off-by: Jonathan Cameron Cc: Reviewed-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman --- drivers/iio/proximity/mb1232.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/iio/proximity/mb1232.c b/drivers/iio/proximity/mb1232.c index 166b3e6d7db8..5254b1fbccfd 100644 --- a/drivers/iio/proximity/mb1232.c +++ b/drivers/iio/proximity/mb1232.c @@ -40,6 +40,11 @@ struct mb1232_data { */ struct completion ranging; int irqnr; + /* Ensure correct alignment of data to push to IIO buffer */ + struct { + s16 distance; + s64 ts __aligned(8); + } scan; }; static irqreturn_t mb1232_handle_irq(int irq, void *dev_id) @@ -113,17 +118,13 @@ static irqreturn_t mb1232_trigger_handler(int irq, void *p) struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; struct mb1232_data *data = iio_priv(indio_dev); - /* - * triggered buffer - * 16-bit channel + 48-bit padding + 64-bit timestamp - */ - s16 buffer[8] = { 0 }; - buffer[0] = mb1232_read_distance(data); - if (buffer[0] < 0) + data->scan.distance = mb1232_read_distance(data); + if (data->scan.distance < 0) goto err; - iio_push_to_buffers_with_timestamp(indio_dev, buffer, pf->timestamp); + iio_push_to_buffers_with_timestamp(indio_dev, &data->scan, + pf->timestamp); err: iio_trigger_notify_done(indio_dev->trig); From 13a76aae01c742f6746cc5b60167dc1c4338163d Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Wed, 22 Jul 2020 16:50:39 +0100 Subject: [PATCH 079/130] iio:accel:bmc150-accel: Fix timestamp alignment and prevent data leak. commit a6f86f724394de3629da63fe5e1b7a4ab3396efe upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses a 16 byte array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data with alignment ensured by use of an explicit c structure. This data is allocated with kzalloc so no data can leak appart from previous readings. Fixes tag is beyond some major refactoring so likely manual backporting would be needed to get that far back. Whilst the force alignment of the ts is not strictly necessary, it does make the code less fragile. Fixes: 3bbec9773389 ("iio: bmc150_accel: add support for hardware fifo") Reported-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron Acked-by: Srinivas Pandruvada Reviewed-by: Andy Shevchenko Cc: Signed-off-by: Greg Kroah-Hartman --- drivers/iio/accel/bmc150-accel-core.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/iio/accel/bmc150-accel-core.c b/drivers/iio/accel/bmc150-accel-core.c index 121b4e89f038..bcdf25f32e22 100644 --- a/drivers/iio/accel/bmc150-accel-core.c +++ b/drivers/iio/accel/bmc150-accel-core.c @@ -189,6 +189,14 @@ struct bmc150_accel_data { struct mutex mutex; u8 fifo_mode, watermark; s16 buffer[8]; + /* + * Ensure there is sufficient space and correct alignment for + * the timestamp if enabled + */ + struct { + __le16 channels[3]; + s64 ts __aligned(8); + } scan; u8 bw_bits; u32 slope_dur; u32 slope_thres; @@ -922,15 +930,16 @@ static int __bmc150_accel_fifo_flush(struct iio_dev *indio_dev, * now. */ for (i = 0; i < count; i++) { - u16 sample[8]; int j, bit; j = 0; for_each_set_bit(bit, indio_dev->active_scan_mask, indio_dev->masklength) - memcpy(&sample[j++], &buffer[i * 3 + bit], 2); + memcpy(&data->scan.channels[j++], &buffer[i * 3 + bit], + sizeof(data->scan.channels[0])); - iio_push_to_buffers_with_timestamp(indio_dev, sample, tstamp); + iio_push_to_buffers_with_timestamp(indio_dev, &data->scan, + tstamp); tstamp += sample_period; } From de2fa1f48a522a3fc536795a955c4f936f567bb0 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Wed, 22 Jul 2020 16:50:57 +0100 Subject: [PATCH 080/130] iio:adc:ti-adc084s021 Fix alignment and data leak issues. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit a661b571e3682705cb402a5cd1e970586a3ec00f upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv(). This data is allocated with kzalloc so no data can leak apart from previous readings. The force alignment of ts is not strictly necessary in this case but reduces the fragility of the code. Fixes: 3691e5a69449 ("iio: adc: add driver for the ti-adc084s021 chip") Reported-by: Lars-Peter Clausen Cc: Mårten Lindahl Signed-off-by: Jonathan Cameron Reviewed-by: Andy Shevchenko Cc: Signed-off-by: Greg Kroah-Hartman --- drivers/iio/adc/ti-adc084s021.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/iio/adc/ti-adc084s021.c b/drivers/iio/adc/ti-adc084s021.c index bdedf456ee05..fc053216d282 100644 --- a/drivers/iio/adc/ti-adc084s021.c +++ b/drivers/iio/adc/ti-adc084s021.c @@ -25,6 +25,11 @@ struct adc084s021 { struct spi_transfer spi_trans; struct regulator *reg; struct mutex lock; + /* Buffer used to align data */ + struct { + __be16 channels[4]; + s64 ts __aligned(8); + } scan; /* * DMA (thus cache coherency maintenance) requires the * transfer buffers to live in their own cache line. @@ -140,14 +145,13 @@ static irqreturn_t adc084s021_buffer_trigger_handler(int irq, void *pollfunc) struct iio_poll_func *pf = pollfunc; struct iio_dev *indio_dev = pf->indio_dev; struct adc084s021 *adc = iio_priv(indio_dev); - __be16 data[8] = {0}; /* 4 * 16-bit words of data + 8 bytes timestamp */ mutex_lock(&adc->lock); - if (adc084s021_adc_conversion(adc, &data) < 0) + if (adc084s021_adc_conversion(adc, adc->scan.channels) < 0) dev_err(&adc->spi->dev, "Failed to read data\n"); - iio_push_to_buffers_with_timestamp(indio_dev, data, + iio_push_to_buffers_with_timestamp(indio_dev, &adc->scan, iio_get_time_ns(indio_dev)); mutex_unlock(&adc->lock); iio_trigger_notify_done(indio_dev->trig); From 24c4430c9b187c05ff0fa33c1bad4dbc72d2fdd2 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Wed, 22 Jul 2020 16:51:02 +0100 Subject: [PATCH 081/130] iio:adc:ina2xx Fix timestamp alignment issue. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit f8cd222feb82ecd82dcf610fcc15186f55f9c2b5 upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses a 32 byte array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data with alignment explicitly requested. This data is allocated with kzalloc so no data can leak apart from previous readings. The explicit alignment isn't technically needed here, but it reduced fragility and avoids cut and paste into drivers where it will be needed. If we want this in older stables will need manual backport due to driver reworks. Fixes: c43a102e67db ("iio: ina2xx: add support for TI INA2xx Power Monitors") Reported-by: Lars-Peter Clausen Cc: Stefan Brüns Cc: Marc Titinger Signed-off-by: Jonathan Cameron Reviewed-by: Andy Shevchenko Cc: Signed-off-by: Greg Kroah-Hartman --- drivers/iio/adc/ina2xx-adc.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/iio/adc/ina2xx-adc.c b/drivers/iio/adc/ina2xx-adc.c index bdd7cba6f6b0..d3e9ec00ef95 100644 --- a/drivers/iio/adc/ina2xx-adc.c +++ b/drivers/iio/adc/ina2xx-adc.c @@ -146,6 +146,11 @@ struct ina2xx_chip_info { int range_vbus; /* Bus voltage maximum in V */ int pga_gain_vshunt; /* Shunt voltage PGA gain */ bool allow_async_readout; + /* data buffer needs space for channel data and timestamp */ + struct { + u16 chan[4]; + u64 ts __aligned(8); + } scan; }; static const struct ina2xx_config ina2xx_config[] = { @@ -738,8 +743,6 @@ static int ina2xx_conversion_ready(struct iio_dev *indio_dev) static int ina2xx_work_buffer(struct iio_dev *indio_dev) { struct ina2xx_chip_info *chip = iio_priv(indio_dev); - /* data buffer needs space for channel data and timestap */ - unsigned short data[4 + sizeof(s64)/sizeof(short)]; int bit, ret, i = 0; s64 time; @@ -758,10 +761,10 @@ static int ina2xx_work_buffer(struct iio_dev *indio_dev) if (ret < 0) return ret; - data[i++] = val; + chip->scan.chan[i++] = val; } - iio_push_to_buffers_with_timestamp(indio_dev, data, time); + iio_push_to_buffers_with_timestamp(indio_dev, &chip->scan, time); return 0; }; From e691d264ddf9382029c81d3ccf3ce3280510cd88 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Wed, 22 Jul 2020 16:51:03 +0100 Subject: [PATCH 082/130] iio:adc:max1118 Fix alignment of timestamp and data leak issues commit db8f06d97ec284dc018e2e4890d2e5035fde8630 upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data. This data is allocated with kzalloc so no data can leak apart from previous readings. The explicit alignment of ts is necessary to ensure correct padding on architectures where s64 is only 4 bytes aligned such as x86_32. Fixes: a9e9c7153e96 ("iio: adc: add max1117/max1118/max1119 ADC driver") Reported-by: Lars-Peter Clausen Cc: Akinobu Mita Signed-off-by: Jonathan Cameron Reviewed-by: Andy Shevchenko Cc: Signed-off-by: Greg Kroah-Hartman --- drivers/iio/adc/max1118.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/iio/adc/max1118.c b/drivers/iio/adc/max1118.c index 3b6f3b9a6c5b..a1b66f92e1bf 100644 --- a/drivers/iio/adc/max1118.c +++ b/drivers/iio/adc/max1118.c @@ -35,6 +35,11 @@ struct max1118 { struct spi_device *spi; struct mutex lock; struct regulator *reg; + /* Ensure natural alignment of buffer elements */ + struct { + u8 channels[2]; + s64 ts __aligned(8); + } scan; u8 data ____cacheline_aligned; }; @@ -159,7 +164,6 @@ static irqreturn_t max1118_trigger_handler(int irq, void *p) struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; struct max1118 *adc = iio_priv(indio_dev); - u8 data[16] = { }; /* 2x 8-bit ADC data + padding + 8 bytes timestamp */ int scan_index; int i = 0; @@ -177,10 +181,10 @@ static irqreturn_t max1118_trigger_handler(int irq, void *p) goto out; } - data[i] = ret; + adc->scan.channels[i] = ret; i++; } - iio_push_to_buffers_with_timestamp(indio_dev, data, + iio_push_to_buffers_with_timestamp(indio_dev, &adc->scan, iio_get_time_ns(indio_dev)); out: mutex_unlock(&adc->lock); From c4b67a1dcba0e43eb275df8bd7fa5366627bd5b0 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Wed, 22 Jul 2020 16:50:56 +0100 Subject: [PATCH 083/130] iio:adc:ti-adc081c Fix alignment and data leak issues commit 54f82df2ba86e2a8e9cbf4036d192366e3905c89 upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv(). This data is allocated with kzalloc so no data can leak apart from previous readings. The eplicit alignment of ts is necessary to ensure correct padding on x86_32 where s64 is only aligned to 4 bytes. Fixes: 08e05d1fce5c ("ti-adc081c: Initial triggered buffer support") Reported-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron Reviewed-by: Andy Shevchenko Cc: Signed-off-by: Greg Kroah-Hartman --- drivers/iio/adc/ti-adc081c.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/iio/adc/ti-adc081c.c b/drivers/iio/adc/ti-adc081c.c index 0235863ff77b..cc8cbffe2b7b 100644 --- a/drivers/iio/adc/ti-adc081c.c +++ b/drivers/iio/adc/ti-adc081c.c @@ -33,6 +33,12 @@ struct adc081c { /* 8, 10 or 12 */ int bits; + + /* Ensure natural alignment of buffer elements */ + struct { + u16 channel; + s64 ts __aligned(8); + } scan; }; #define REG_CONV_RES 0x00 @@ -128,14 +134,13 @@ static irqreturn_t adc081c_trigger_handler(int irq, void *p) struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; struct adc081c *data = iio_priv(indio_dev); - u16 buf[8]; /* 2 bytes data + 6 bytes padding + 8 bytes timestamp */ int ret; ret = i2c_smbus_read_word_swapped(data->i2c, REG_CONV_RES); if (ret < 0) goto out; - buf[0] = ret; - iio_push_to_buffers_with_timestamp(indio_dev, buf, + data->scan.channel = ret; + iio_push_to_buffers_with_timestamp(indio_dev, &data->scan, iio_get_time_ns(indio_dev)); out: iio_trigger_notify_done(indio_dev->trig); From 176fb9423ab8e91ff4776483b81fcc56567f0347 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Wed, 22 Jul 2020 16:50:49 +0100 Subject: [PATCH 084/130] iio:magnetometer:ak8975 Fix alignment and data leak issues. commit 02ad21cefbac4d89ac443866f25b90449527737b upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data. This data is allocated with kzalloc so no data can leak apart from previous readings. The explicit alignment of ts is not necessary in this case as by coincidence the padding will end up the same, however I consider it to make the code less fragile and have included it. Fixes: bc11ca4a0b84 ("iio:magnetometer:ak8975: triggered buffer support") Reported-by: Lars-Peter Clausen Cc: Gregor Boirie Cc: Linus Walleij Signed-off-by: Jonathan Cameron Reviewed-by: Andy Shevchenko Cc: Signed-off-by: Greg Kroah-Hartman --- drivers/iio/magnetometer/ak8975.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c index 893bec5a0312..82af903a765b 100644 --- a/drivers/iio/magnetometer/ak8975.c +++ b/drivers/iio/magnetometer/ak8975.c @@ -368,6 +368,12 @@ struct ak8975_data { struct iio_mount_matrix orientation; struct regulator *vdd; struct regulator *vid; + + /* Ensure natural alignment of timestamp */ + struct { + s16 channels[3]; + s64 ts __aligned(8); + } scan; }; /* Enable attached power regulator if any. */ @@ -805,7 +811,6 @@ static void ak8975_fill_buffer(struct iio_dev *indio_dev) const struct i2c_client *client = data->client; const struct ak_def *def = data->def; int ret; - s16 buff[8]; /* 3 x 16 bits axis values + 1 aligned 64 bits timestamp */ __le16 fval[3]; mutex_lock(&data->lock); @@ -828,12 +833,13 @@ static void ak8975_fill_buffer(struct iio_dev *indio_dev) mutex_unlock(&data->lock); /* Clamp to valid range. */ - buff[0] = clamp_t(s16, le16_to_cpu(fval[0]), -def->range, def->range); - buff[1] = clamp_t(s16, le16_to_cpu(fval[1]), -def->range, def->range); - buff[2] = clamp_t(s16, le16_to_cpu(fval[2]), -def->range, def->range); + data->scan.channels[0] = clamp_t(s16, le16_to_cpu(fval[0]), -def->range, def->range); + data->scan.channels[1] = clamp_t(s16, le16_to_cpu(fval[1]), -def->range, def->range); + data->scan.channels[2] = clamp_t(s16, le16_to_cpu(fval[2]), -def->range, def->range); - iio_push_to_buffers_with_timestamp(indio_dev, buff, + iio_push_to_buffers_with_timestamp(indio_dev, &data->scan, iio_get_time_ns(indio_dev)); + return; unlock: From cd1a2517b35e82578abe58578528ef6f1549665b Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Wed, 22 Jul 2020 16:50:45 +0100 Subject: [PATCH 085/130] iio:light:max44000 Fix timestamp alignment and prevent data leak. commit 523628852a5f5f34a15252b2634d0498d3cfb347 upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses a 16 byte array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv(). This data is allocated with kzalloc so no data can leak appart from previous readings. It is necessary to force the alignment of ts to avoid the padding on x86_32 being different from 64 bit platorms (it alows for 4 bytes aligned 8 byte types. Fixes: 06ad7ea10e2b ("max44000: Initial triggered buffer support") Reported-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron Reviewed-by: Andy Shevchenko Cc: Signed-off-by: Greg Kroah-Hartman --- drivers/iio/light/max44000.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/iio/light/max44000.c b/drivers/iio/light/max44000.c index d6d8007ba430..8cc619de2c3a 100644 --- a/drivers/iio/light/max44000.c +++ b/drivers/iio/light/max44000.c @@ -75,6 +75,11 @@ struct max44000_data { struct mutex lock; struct regmap *regmap; + /* Ensure naturally aligned timestamp */ + struct { + u16 channels[2]; + s64 ts __aligned(8); + } scan; }; /* Default scale is set to the minimum of 0.03125 or 1 / (1 << 5) lux */ @@ -488,7 +493,6 @@ static irqreturn_t max44000_trigger_handler(int irq, void *p) struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; struct max44000_data *data = iio_priv(indio_dev); - u16 buf[8]; /* 2x u16 + padding + 8 bytes timestamp */ int index = 0; unsigned int regval; int ret; @@ -498,17 +502,17 @@ static irqreturn_t max44000_trigger_handler(int irq, void *p) ret = max44000_read_alsval(data); if (ret < 0) goto out_unlock; - buf[index++] = ret; + data->scan.channels[index++] = ret; } if (test_bit(MAX44000_SCAN_INDEX_PRX, indio_dev->active_scan_mask)) { ret = regmap_read(data->regmap, MAX44000_REG_PRX_DATA, ®val); if (ret < 0) goto out_unlock; - buf[index] = regval; + data->scan.channels[index] = regval; } mutex_unlock(&data->lock); - iio_push_to_buffers_with_timestamp(indio_dev, buf, + iio_push_to_buffers_with_timestamp(indio_dev, &data->scan, iio_get_time_ns(indio_dev)); iio_trigger_notify_done(indio_dev->trig); return IRQ_HANDLED; From b040ac56b264d307f534e7009489c75f8e6a368b Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Wed, 22 Jul 2020 16:50:43 +0100 Subject: [PATCH 086/130] iio:chemical:ccs811: Fix timestamp alignment and prevent data leak. commit eb1a148ef41d8ae8d9201efc3f1b145976290331 upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data with alignment explicitly requested. This data is allocated with kzalloc so no data can leak appart from previous readings. The explicit alignment of ts is necessary to ensure consistent padding for x86_32 in which the ts would otherwise be 4 byte aligned. Fixes: 283d26917ad6 ("iio: chemical: ccs811: Add triggered buffer support") Reported-by: Lars-Peter Clausen Cc: Narcisa Ana Maria Vasile Signed-off-by: Jonathan Cameron Reviewed-by: Andy Shevchenko Cc: Signed-off-by: Greg Kroah-Hartman --- drivers/iio/chemical/ccs811.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/iio/chemical/ccs811.c b/drivers/iio/chemical/ccs811.c index 2ebdfc35bcda..7bf4e9a16a6a 100644 --- a/drivers/iio/chemical/ccs811.c +++ b/drivers/iio/chemical/ccs811.c @@ -75,6 +75,11 @@ struct ccs811_data { struct ccs811_reading buffer; struct iio_trigger *drdy_trig; bool drdy_trig_on; + /* Ensures correct alignment of timestamp if present */ + struct { + s16 channels[2]; + s64 ts __aligned(8); + } scan; }; static const struct iio_chan_spec ccs811_channels[] = { @@ -306,17 +311,17 @@ static irqreturn_t ccs811_trigger_handler(int irq, void *p) struct iio_dev *indio_dev = pf->indio_dev; struct ccs811_data *data = iio_priv(indio_dev); struct i2c_client *client = data->client; - s16 buf[8]; /* s16 eCO2 + s16 TVOC + padding + 8 byte timestamp */ int ret; - ret = i2c_smbus_read_i2c_block_data(client, CCS811_ALG_RESULT_DATA, 4, - (u8 *)&buf); + ret = i2c_smbus_read_i2c_block_data(client, CCS811_ALG_RESULT_DATA, + sizeof(data->scan.channels), + (u8 *)data->scan.channels); if (ret != 4) { dev_err(&client->dev, "cannot read sensor data\n"); goto err; } - iio_push_to_buffers_with_timestamp(indio_dev, buf, + iio_push_to_buffers_with_timestamp(indio_dev, &data->scan, iio_get_time_ns(indio_dev)); err: From e94ec7f512cf41c50de4ab68e7573c551129db6a Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Wed, 22 Jul 2020 16:50:37 +0100 Subject: [PATCH 087/130] iio: accel: kxsd9: Fix alignment of local buffer. commit 95ad67577de4ea08eb8e441394e698aa4addcc0b upstream. iio_push_to_buffers_with_timestamp assumes 8 byte alignment which is not guaranteed by an array of smaller elements. Note that whilst in this particular case the alignment forcing of the ts element is not strictly necessary it acts as good documentation. Doing this where not necessary should cut down on the number of cut and paste introduced errors elsewhere. Fixes: 0427a106a98a ("iio: accel: kxsd9: Add triggered buffer handling") Reported-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron Reviewed-by: Andy Shevchenko Cc: Signed-off-by: Greg Kroah-Hartman --- drivers/iio/accel/kxsd9.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/iio/accel/kxsd9.c b/drivers/iio/accel/kxsd9.c index 0b876b2dc5bd..76429e2a6fb8 100644 --- a/drivers/iio/accel/kxsd9.c +++ b/drivers/iio/accel/kxsd9.c @@ -209,14 +209,20 @@ static irqreturn_t kxsd9_trigger_handler(int irq, void *p) const struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; struct kxsd9_state *st = iio_priv(indio_dev); + /* + * Ensure correct positioning and alignment of timestamp. + * No need to zero initialize as all elements written. + */ + struct { + __be16 chan[4]; + s64 ts __aligned(8); + } hw_values; int ret; - /* 4 * 16bit values AND timestamp */ - __be16 hw_values[8]; ret = regmap_bulk_read(st->map, KXSD9_REG_X, - &hw_values, - 8); + hw_values.chan, + sizeof(hw_values.chan)); if (ret) { dev_err(st->dev, "error reading data\n"); @@ -224,7 +230,7 @@ static irqreturn_t kxsd9_trigger_handler(int irq, void *p) } iio_push_to_buffers_with_timestamp(indio_dev, - hw_values, + &hw_values, iio_get_time_ns(indio_dev)); iio_trigger_notify_done(indio_dev->trig); From a6dc50f301295fe0af9abfb2a080be720153a083 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Wed, 22 Jul 2020 16:50:40 +0100 Subject: [PATCH 088/130] iio:accel:mma7455: Fix timestamp alignment and prevent data leak. commit 7e5ac1f2206eda414f90c698fe1820dee873394d upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses a 16 byte u8 array on the stack As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data with alignment ensured by use of an explicit c structure. This data is allocated with kzalloc so no data can leak appart from previous readings. The force alignment of ts is not strictly necessary in this particularly case but does make the code less fragile. Fixes: a84ef0d181d9 ("iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driver") Reported-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron Cc: Reviewed-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman --- drivers/iio/accel/mma7455_core.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/iio/accel/mma7455_core.c b/drivers/iio/accel/mma7455_core.c index 8b5a6aff9bf4..70ec3490bdb8 100644 --- a/drivers/iio/accel/mma7455_core.c +++ b/drivers/iio/accel/mma7455_core.c @@ -52,6 +52,14 @@ struct mma7455_data { struct regmap *regmap; + /* + * Used to reorganize data. Will ensure correct alignment of + * the timestamp if present + */ + struct { + __le16 channels[3]; + s64 ts __aligned(8); + } scan; }; static int mma7455_drdy(struct mma7455_data *mma7455) @@ -82,19 +90,19 @@ static irqreturn_t mma7455_trigger_handler(int irq, void *p) struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; struct mma7455_data *mma7455 = iio_priv(indio_dev); - u8 buf[16]; /* 3 x 16-bit channels + padding + ts */ int ret; ret = mma7455_drdy(mma7455); if (ret) goto done; - ret = regmap_bulk_read(mma7455->regmap, MMA7455_REG_XOUTL, buf, - sizeof(__le16) * 3); + ret = regmap_bulk_read(mma7455->regmap, MMA7455_REG_XOUTL, + mma7455->scan.channels, + sizeof(mma7455->scan.channels)); if (ret) goto done; - iio_push_to_buffers_with_timestamp(indio_dev, buf, + iio_push_to_buffers_with_timestamp(indio_dev, &mma7455->scan, iio_get_time_ns(indio_dev)); done: From e9f7332b00405bb81f3ad258f2c311e4d6e2734c Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Wed, 22 Jul 2020 16:50:38 +0100 Subject: [PATCH 089/130] iio:accel:mma8452: Fix timestamp alignment and prevent data leak. commit 89226a296d816727405d3fea684ef69e7d388bd8 upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses a 16 byte u8 array on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data with alignment ensured by use of an explicit c structure. This data is allocated with kzalloc so no data can leak appart from previous readings. The additional forcing of the 8 byte alignment of the timestamp is not strictly necessary but makes the code less fragile by making this explicit. Fixes: c7eeea93ac60 ("iio: Add Freescale MMA8452Q 3-axis accelerometer driver") Reported-by: Lars-Peter Clausen Cc: Peter Meerwald Signed-off-by: Jonathan Cameron Reviewed-by: Andy Shevchenko Cc: Signed-off-by: Greg Kroah-Hartman --- drivers/iio/accel/mma8452.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c index 813bca7cfc3e..85d453b3f5ec 100644 --- a/drivers/iio/accel/mma8452.c +++ b/drivers/iio/accel/mma8452.c @@ -110,6 +110,12 @@ struct mma8452_data { int sleep_val; struct regulator *vdd_reg; struct regulator *vddio_reg; + + /* Ensure correct alignment of time stamp when present */ + struct { + __be16 channels[3]; + s64 ts __aligned(8); + } buffer; }; /** @@ -1091,14 +1097,13 @@ static irqreturn_t mma8452_trigger_handler(int irq, void *p) struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; struct mma8452_data *data = iio_priv(indio_dev); - u8 buffer[16]; /* 3 16-bit channels + padding + ts */ int ret; - ret = mma8452_read(data, (__be16 *)buffer); + ret = mma8452_read(data, data->buffer.channels); if (ret < 0) goto done; - iio_push_to_buffers_with_timestamp(indio_dev, buffer, + iio_push_to_buffers_with_timestamp(indio_dev, &data->buffer, iio_get_time_ns(indio_dev)); done: From c570a3d660a2c5a21d2f3b1212bee0d33b03b215 Mon Sep 17 00:00:00 2001 From: Rustam Kovhaev Date: Tue, 4 Aug 2020 07:56:14 -0700 Subject: [PATCH 090/130] staging: wlan-ng: fix out of bounds read in prism2sta_probe_usb() commit fea22e159d51c766ba70473f473a0ec914cc7e92 upstream. let's use usb_find_common_endpoints() to discover endpoints, it does all necessary checks for type and xfer direction remove memset() in hfa384x_create(), because we now assign endpoints in prism2sta_probe_usb() and because create_wlan() uses kzalloc() to allocate hfa384x struct before calling hfa384x_create() Fixes: faaff9765664 ("staging: wlan-ng: properly check endpoint types") Reported-and-tested-by: syzbot+22794221ab96b0bab53a@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=22794221ab96b0bab53a Signed-off-by: Rustam Kovhaev Cc: stable Link: https://lore.kernel.org/r/20200804145614.104320-1-rkovhaev@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/staging/wlan-ng/hfa384x_usb.c | 5 ----- drivers/staging/wlan-ng/prism2usb.c | 19 ++++++------------- 2 files changed, 6 insertions(+), 18 deletions(-) diff --git a/drivers/staging/wlan-ng/hfa384x_usb.c b/drivers/staging/wlan-ng/hfa384x_usb.c index e29c14e0ed49..ed4ff78dd02a 100644 --- a/drivers/staging/wlan-ng/hfa384x_usb.c +++ b/drivers/staging/wlan-ng/hfa384x_usb.c @@ -526,13 +526,8 @@ static void hfa384x_usb_defer(struct work_struct *data) */ void hfa384x_create(struct hfa384x *hw, struct usb_device *usb) { - memset(hw, 0, sizeof(*hw)); hw->usb = usb; - /* set up the endpoints */ - hw->endp_in = usb_rcvbulkpipe(usb, 1); - hw->endp_out = usb_sndbulkpipe(usb, 2); - /* Set up the waitq */ init_waitqueue_head(&hw->cmdq); diff --git a/drivers/staging/wlan-ng/prism2usb.c b/drivers/staging/wlan-ng/prism2usb.c index 8d32b1603d10..9eee72aff723 100644 --- a/drivers/staging/wlan-ng/prism2usb.c +++ b/drivers/staging/wlan-ng/prism2usb.c @@ -61,23 +61,14 @@ static int prism2sta_probe_usb(struct usb_interface *interface, const struct usb_device_id *id) { struct usb_device *dev; - const struct usb_endpoint_descriptor *epd; - const struct usb_host_interface *iface_desc = interface->cur_altsetting; + struct usb_endpoint_descriptor *bulk_in, *bulk_out; + struct usb_host_interface *iface_desc = interface->cur_altsetting; struct wlandevice *wlandev = NULL; struct hfa384x *hw = NULL; int result = 0; - if (iface_desc->desc.bNumEndpoints != 2) { - result = -ENODEV; - goto failed; - } - - result = -EINVAL; - epd = &iface_desc->endpoint[1].desc; - if (!usb_endpoint_is_bulk_in(epd)) - goto failed; - epd = &iface_desc->endpoint[2].desc; - if (!usb_endpoint_is_bulk_out(epd)) + result = usb_find_common_endpoints(iface_desc, &bulk_in, &bulk_out, NULL, NULL); + if (result) goto failed; dev = interface_to_usbdev(interface); @@ -96,6 +87,8 @@ static int prism2sta_probe_usb(struct usb_interface *interface, } /* Initialize the hw data */ + hw->endp_in = usb_rcvbulkpipe(dev, bulk_in->bEndpointAddress); + hw->endp_out = usb_sndbulkpipe(dev, bulk_out->bEndpointAddress); hfa384x_create(hw, dev); hw->wlandev = wlandev; From 1aaceffa5ace02d120ce2b62549ec3fa38634dc2 Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Wed, 26 Aug 2020 17:26:43 +0800 Subject: [PATCH 091/130] btrfs: require only sector size alignment for parent eb bytenr commit ea57788eb76dc81f6003245427356a1dcd0ac524 upstream. [BUG] A completely sane converted fs will cause kernel warning at balance time: [ 1557.188633] BTRFS info (device sda7): relocating block group 8162107392 flags data [ 1563.358078] BTRFS info (device sda7): found 11722 extents [ 1563.358277] BTRFS info (device sda7): leaf 7989321728 gen 95 total ptrs 213 free space 3458 owner 2 [ 1563.358280] item 0 key (7984947200 169 0) itemoff 16250 itemsize 33 [ 1563.358281] extent refs 1 gen 90 flags 2 [ 1563.358282] ref#0: tree block backref root 4 [ 1563.358285] item 1 key (7985602560 169 0) itemoff 16217 itemsize 33 [ 1563.358286] extent refs 1 gen 93 flags 258 [ 1563.358287] ref#0: shared block backref parent 7985602560 [ 1563.358288] (parent 7985602560 is NOT ALIGNED to nodesize 16384) [ 1563.358290] item 2 key (7985635328 169 0) itemoff 16184 itemsize 33 ... [ 1563.358995] BTRFS error (device sda7): eb 7989321728 invalid extent inline ref type 182 [ 1563.358996] ------------[ cut here ]------------ [ 1563.359005] WARNING: CPU: 14 PID: 2930 at 0xffffffff9f231766 Then with transaction abort, and obviously failed to balance the fs. [CAUSE] That mentioned inline ref type 182 is completely sane, it's BTRFS_SHARED_BLOCK_REF_KEY, it's some extra check making kernel to believe it's invalid. Commit 64ecdb647ddb ("Btrfs: add one more sanity check for shared ref type") introduced extra checks for backref type. One of the requirement is, parent bytenr must be aligned to node size, which is not correct. One example is like this: 0 1G 1G+4K 2G 2G+4K | |///////////////////|//| <- A chunk starts at 1G+4K | | <- A tree block get reserved at bytenr 1G+4K Then we have a valid tree block at bytenr 1G+4K, but not aligned to nodesize (16K). Such chunk is not ideal, but current kernel can handle it pretty well. We may warn about such tree block in the future, but should not reject them. [FIX] Change the alignment requirement from node size alignment to sector size alignment. Also, to make our lives a little easier, also output @iref when btrfs_get_extent_inline_ref_type() failed, so we can locate the item easier. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205475 Fixes: 64ecdb647ddb ("Btrfs: add one more sanity check for shared ref type") CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Josef Bacik Signed-off-by: Qu Wenruo [ update comments and messages ] Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman --- fs/btrfs/extent-tree.c | 19 +++++++++---------- fs/btrfs/print-tree.c | 12 +++++++----- 2 files changed, 16 insertions(+), 15 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 541497036cc2..31c1ed554d26 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -402,12 +402,11 @@ int btrfs_get_extent_inline_ref_type(const struct extent_buffer *eb, if (type == BTRFS_SHARED_BLOCK_REF_KEY) { ASSERT(eb->fs_info); /* - * Every shared one has parent tree - * block, which must be aligned to - * nodesize. + * Every shared one has parent tree block, + * which must be aligned to sector size. */ if (offset && - IS_ALIGNED(offset, eb->fs_info->nodesize)) + IS_ALIGNED(offset, eb->fs_info->sectorsize)) return type; } } else if (is_data == BTRFS_REF_TYPE_DATA) { @@ -416,12 +415,11 @@ int btrfs_get_extent_inline_ref_type(const struct extent_buffer *eb, if (type == BTRFS_SHARED_DATA_REF_KEY) { ASSERT(eb->fs_info); /* - * Every shared one has parent tree - * block, which must be aligned to - * nodesize. + * Every shared one has parent tree block, + * which must be aligned to sector size. */ if (offset && - IS_ALIGNED(offset, eb->fs_info->nodesize)) + IS_ALIGNED(offset, eb->fs_info->sectorsize)) return type; } } else { @@ -431,8 +429,9 @@ int btrfs_get_extent_inline_ref_type(const struct extent_buffer *eb, } btrfs_print_leaf((struct extent_buffer *)eb); - btrfs_err(eb->fs_info, "eb %llu invalid extent inline ref type %d", - eb->start, type); + btrfs_err(eb->fs_info, + "eb %llu iref 0x%lx invalid extent inline ref type %d", + eb->start, (unsigned long)iref, type); WARN_ON(1); return BTRFS_REF_TYPE_INVALID; diff --git a/fs/btrfs/print-tree.c b/fs/btrfs/print-tree.c index 9cb50577d982..f4edadf1067f 100644 --- a/fs/btrfs/print-tree.c +++ b/fs/btrfs/print-tree.c @@ -95,9 +95,10 @@ static void print_extent_item(struct extent_buffer *eb, int slot, int type) * offset is supposed to be a tree block which * must be aligned to nodesize. */ - if (!IS_ALIGNED(offset, eb->fs_info->nodesize)) - pr_info("\t\t\t(parent %llu is NOT ALIGNED to nodesize %llu)\n", - offset, (unsigned long long)eb->fs_info->nodesize); + if (!IS_ALIGNED(offset, eb->fs_info->sectorsize)) + pr_info( + "\t\t\t(parent %llu not aligned to sectorsize %u)\n", + offset, eb->fs_info->sectorsize); break; case BTRFS_EXTENT_DATA_REF_KEY: dref = (struct btrfs_extent_data_ref *)(&iref->offset); @@ -112,8 +113,9 @@ static void print_extent_item(struct extent_buffer *eb, int slot, int type) * must be aligned to nodesize. */ if (!IS_ALIGNED(offset, eb->fs_info->nodesize)) - pr_info("\t\t\t(parent %llu is NOT ALIGNED to nodesize %llu)\n", - offset, (unsigned long long)eb->fs_info->nodesize); + pr_info( + "\t\t\t(parent %llu not aligned to sectorsize %u)\n", + offset, eb->fs_info->sectorsize); break; default: pr_cont("(extent %llu has INVALID ref type %d)\n", From 524f3f303079b129622455d32fa778bcf247fbb7 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 31 Aug 2020 10:52:42 -0400 Subject: [PATCH 092/130] btrfs: fix lockdep splat in add_missing_dev commit fccc0007b8dc952c6bc0805cdf842eb8ea06a639 upstream. Nikolay reported a lockdep splat in generic/476 that I could reproduce with btrfs/187. ====================================================== WARNING: possible circular locking dependency detected 5.9.0-rc2+ #1 Tainted: G W ------------------------------------------------------ kswapd0/100 is trying to acquire lock: ffff9e8ef38b6268 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node.part.0+0x3f/0x330 but task is already holding lock: ffffffffa9d74700 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire+0x65/0x80 slab_pre_alloc_hook.constprop.0+0x20/0x200 kmem_cache_alloc_trace+0x3a/0x1a0 btrfs_alloc_device+0x43/0x210 add_missing_dev+0x20/0x90 read_one_chunk+0x301/0x430 btrfs_read_sys_array+0x17b/0x1b0 open_ctree+0xa62/0x1896 btrfs_mount_root.cold+0x12/0xea legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 vfs_kern_mount.part.0+0x71/0xb0 btrfs_mount+0x10d/0x379 legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 path_mount+0x434/0xc00 __x64_sys_mount+0xe3/0x120 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #1 (&fs_info->chunk_mutex){+.+.}-{3:3}: __mutex_lock+0x7e/0x7e0 btrfs_chunk_alloc+0x125/0x3a0 find_free_extent+0xdf6/0x1210 btrfs_reserve_extent+0xb3/0x1b0 btrfs_alloc_tree_block+0xb0/0x310 alloc_tree_block_no_bg_flush+0x4a/0x60 __btrfs_cow_block+0x11a/0x530 btrfs_cow_block+0x104/0x220 btrfs_search_slot+0x52e/0x9d0 btrfs_lookup_inode+0x2a/0x8f __btrfs_update_delayed_inode+0x80/0x240 btrfs_commit_inode_delayed_inode+0x119/0x120 btrfs_evict_inode+0x357/0x500 evict+0xcf/0x1f0 vfs_rmdir.part.0+0x149/0x160 do_rmdir+0x136/0x1a0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (&delayed_node->mutex){+.+.}-{3:3}: __lock_acquire+0x1184/0x1fa0 lock_acquire+0xa4/0x3d0 __mutex_lock+0x7e/0x7e0 __btrfs_release_delayed_node.part.0+0x3f/0x330 btrfs_evict_inode+0x24c/0x500 evict+0xcf/0x1f0 dispose_list+0x48/0x70 prune_icache_sb+0x44/0x50 super_cache_scan+0x161/0x1e0 do_shrink_slab+0x178/0x3c0 shrink_slab+0x17c/0x290 shrink_node+0x2b2/0x6d0 balance_pgdat+0x30a/0x670 kswapd+0x213/0x4c0 kthread+0x138/0x160 ret_from_fork+0x1f/0x30 other info that might help us debug this: Chain exists of: &delayed_node->mutex --> &fs_info->chunk_mutex --> fs_reclaim Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(&fs_info->chunk_mutex); lock(fs_reclaim); lock(&delayed_node->mutex); *** DEADLOCK *** 3 locks held by kswapd0/100: #0: ffffffffa9d74700 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30 #1: ffffffffa9d65c50 (shrinker_rwsem){++++}-{3:3}, at: shrink_slab+0x115/0x290 #2: ffff9e8e9da260e0 (&type->s_umount_key#48){++++}-{3:3}, at: super_cache_scan+0x38/0x1e0 stack backtrace: CPU: 1 PID: 100 Comm: kswapd0 Tainted: G W 5.9.0-rc2+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x92/0xc8 check_noncircular+0x12d/0x150 __lock_acquire+0x1184/0x1fa0 lock_acquire+0xa4/0x3d0 ? __btrfs_release_delayed_node.part.0+0x3f/0x330 __mutex_lock+0x7e/0x7e0 ? __btrfs_release_delayed_node.part.0+0x3f/0x330 ? __btrfs_release_delayed_node.part.0+0x3f/0x330 ? lock_acquire+0xa4/0x3d0 ? btrfs_evict_inode+0x11e/0x500 ? find_held_lock+0x2b/0x80 __btrfs_release_delayed_node.part.0+0x3f/0x330 btrfs_evict_inode+0x24c/0x500 evict+0xcf/0x1f0 dispose_list+0x48/0x70 prune_icache_sb+0x44/0x50 super_cache_scan+0x161/0x1e0 do_shrink_slab+0x178/0x3c0 shrink_slab+0x17c/0x290 shrink_node+0x2b2/0x6d0 balance_pgdat+0x30a/0x670 kswapd+0x213/0x4c0 ? _raw_spin_unlock_irqrestore+0x46/0x60 ? add_wait_queue_exclusive+0x70/0x70 ? balance_pgdat+0x670/0x670 kthread+0x138/0x160 ? kthread_create_worker_on_cpu+0x40/0x40 ret_from_fork+0x1f/0x30 This is because we are holding the chunk_mutex when we call btrfs_alloc_device, which does a GFP_KERNEL allocation. We don't want to switch that to a GFP_NOFS lock because this is the only place where it matters. So instead use memalloc_nofs_save() around the allocation in order to avoid the lockdep splat. Reported-by: Nikolay Borisov CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Anand Jain Signed-off-by: Josef Bacik Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman --- fs/btrfs/volumes.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 81be71fb569e..4ecd6663dfb5 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -4,6 +4,7 @@ */ #include +#include #include #include #include @@ -6708,8 +6709,17 @@ static struct btrfs_device *add_missing_dev(struct btrfs_fs_devices *fs_devices, u64 devid, u8 *dev_uuid) { struct btrfs_device *device; + unsigned int nofs_flag; + /* + * We call this under the chunk_mutex, so we want to use NOFS for this + * allocation, however we don't want to change btrfs_alloc_device() to + * always do NOFS because we use it in a lot of other GFP_KERNEL safe + * places. + */ + nofs_flag = memalloc_nofs_save(); device = btrfs_alloc_device(NULL, &devid, dev_uuid); + memalloc_nofs_restore(nofs_flag); if (IS_ERR(device)) return device; From b85c64a7161fa7f42f0be39ffbd2022eee435cae Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Mon, 14 Sep 2020 09:01:04 +0100 Subject: [PATCH 093/130] btrfs: fix wrong address when faulting in pages in the search ioctl commit 1c78544eaa4660096aeb6a57ec82b42cdb3bfe5a upstream. When faulting in the pages for the user supplied buffer for the search ioctl, we are passing only the base address of the buffer to the function fault_in_pages_writeable(). This means that after the first iteration of the while loop that searches for leaves, when we have a non-zero offset, stored in 'sk_offset', we try to fault in a wrong page range. So fix this by adding the offset in 'sk_offset' to the base address of the user supplied buffer when calling fault_in_pages_writeable(). Several users have reported that the applications compsize and bees have started to operate incorrectly since commit a48b73eca4ceb9 ("btrfs: fix potential deadlock in the search ioctl") was added to stable trees, and these applications make heavy use of the search ioctls. This fixes their issues. Link: https://lore.kernel.org/linux-btrfs/632b888d-a3c3-b085-cdf5-f9bb61017d92@lechevalier.se/ Link: https://github.com/kilobyte/compsize/issues/34 Fixes: a48b73eca4ceb9 ("btrfs: fix potential deadlock in the search ioctl") CC: stable@vger.kernel.org # 4.4+ Tested-by: A L Reviewed-by: Josef Bacik Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman --- fs/btrfs/ioctl.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 775fd5975191..63394b450afc 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -2215,7 +2215,8 @@ static noinline int search_ioctl(struct inode *inode, key.offset = sk->min_offset; while (1) { - ret = fault_in_pages_writeable(ubuf, *buf_size - sk_offset); + ret = fault_in_pages_writeable(ubuf + sk_offset, + *buf_size - sk_offset); if (ret) break; From b9fb631f6b03ececf753df24de3c4ab0ced169be Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 3 Aug 2020 11:27:06 +0300 Subject: [PATCH 094/130] kobject: Restore old behaviour of kobject_del(NULL) commit 40b8b826a6998639dd1c26f0e127f18371e1058d upstream. The commit 079ad2fb4bf9 ("kobject: Avoid premature parent object freeing in kobject_cleanup()") inadvertently dropped a possibility to call kobject_del() with NULL pointer. Restore the old behaviour. Fixes: 079ad2fb4bf9 ("kobject: Avoid premature parent object freeing in kobject_cleanup()") Cc: stable Reported-by: Qu Wenruo Cc: Heikki Krogerus Signed-off-by: Andy Shevchenko Reviewed-by: Qu Wenruo Link: https://lore.kernel.org/r/20200803082706.65347-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- lib/kobject.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/lib/kobject.c b/lib/kobject.c index 386873bdd51c..0c6d17503a11 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -630,8 +630,12 @@ static void __kobject_del(struct kobject *kobj) */ void kobject_del(struct kobject *kobj) { - struct kobject *parent = kobj->parent; + struct kobject *parent; + if (!kobj) + return; + + parent = kobj->parent; __kobject_del(kobj); kobject_put(parent); } From e7249ceb7ff83d19e1d13df397e67ae228d5b1e8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Micha=C5=82=20Miros=C5=82aw?= Date: Wed, 12 Aug 2020 03:31:34 +0200 Subject: [PATCH 095/130] regulator: push allocation in regulator_init_coupling() outside of lock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 73a32129f8ccb556704a26b422f54e048bf14bd0 upstream. Allocating memory with regulator_list_mutex held makes lockdep unhappy when memory pressure makes the system do fs_reclaim on eg. eMMC using a regulator. Push the lock inside regulator_init_coupling() after the allocation. ====================================================== WARNING: possible circular locking dependency detected 5.7.13+ #533 Not tainted ------------------------------------------------------ kswapd0/383 is trying to acquire lock: cca78ca4 (&sbi->write_io[i][j].io_rwsem){++++}-{3:3}, at: __submit_merged_write_cond+0x104/0x154 but task is already holding lock: c0e38518 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x0/0x50 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire.part.11+0x40/0x50 fs_reclaim_acquire+0x24/0x28 __kmalloc+0x54/0x218 regulator_register+0x860/0x1584 dummy_regulator_probe+0x60/0xa8 [...] other info that might help us debug this: Chain exists of: &sbi->write_io[i][j].io_rwsem --> regulator_list_mutex --> fs_reclaim Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(regulator_list_mutex); lock(fs_reclaim); lock(&sbi->write_io[i][j].io_rwsem); *** DEADLOCK *** 1 lock held by kswapd0/383: #0: c0e38518 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x0/0x50 [...] Fixes: d8ca7d184b33 ("regulator: core: Introduce API for regulators coupling customization") Signed-off-by: Michał Mirosław Reviewed-by: Dmitry Osipenko Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1a889cf7f61c6429c9e6b34ddcdde99be77a26b6.1597195321.git.mirq-linux@rere.qmqm.pl Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman --- drivers/regulator/core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index c457fa3b8c3e..ef793ee69fae 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -4955,7 +4955,10 @@ static int regulator_init_coupling(struct regulator_dev *rdev) if (!of_check_coupling_data(rdev)) return -EPERM; + mutex_lock(®ulator_list_mutex); rdev->coupling_desc.coupler = regulator_find_coupler(rdev); + mutex_unlock(®ulator_list_mutex); + if (IS_ERR(rdev->coupling_desc.coupler)) { err = PTR_ERR(rdev->coupling_desc.coupler); rdev_err(rdev, "failed to get coupler: %d\n", err); @@ -5155,9 +5158,7 @@ regulator_register(const struct regulator_desc *regulator_desc, if (ret < 0) goto wash; - mutex_lock(®ulator_list_mutex); ret = regulator_init_coupling(rdev); - mutex_unlock(®ulator_list_mutex); if (ret < 0) goto wash; From 31d89652c38443f27e386b78a4eb46aed0ccd1c7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Micha=C5=82=20Miros=C5=82aw?= Date: Wed, 12 Aug 2020 03:31:35 +0200 Subject: [PATCH 096/130] regulator: push allocations in create_regulator() outside of lock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 87fe29b61f9522a3d7b60a4580851f548558186f upstream. Move all allocations outside of the regulator_lock()ed section. ====================================================== WARNING: possible circular locking dependency detected 5.7.13+ #535 Not tainted ------------------------------------------------------ f2fs_discard-179:7/702 is trying to acquire lock: c0e5d920 (regulator_list_mutex){+.+.}-{3:3}, at: regulator_lock_dependent+0x54/0x2c0 but task is already holding lock: cb95b080 (&dcc->cmd_lock){+.+.}-{3:3}, at: __issue_discard_cmd+0xec/0x5f8 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: [...] -> #3 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire.part.11+0x40/0x50 fs_reclaim_acquire+0x24/0x28 __kmalloc_track_caller+0x54/0x218 kstrdup+0x40/0x5c create_regulator+0xf4/0x368 regulator_resolve_supply+0x1a0/0x200 regulator_register+0x9c8/0x163c [...] other info that might help us debug this: Chain exists of: regulator_list_mutex --> &sit_i->sentry_lock --> &dcc->cmd_lock [...] Fixes: f8702f9e4aa7 ("regulator: core: Use ww_mutex for regulators locking") Signed-off-by: Michał Mirosław Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/6eebc99b2474f4ffaa0405b15178ece0e7e4f608.1597195321.git.mirq-linux@rere.qmqm.pl Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman --- drivers/regulator/core.c | 53 +++++++++++++++++++++------------------- 1 file changed, 28 insertions(+), 25 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index ef793ee69fae..96f4daa5de1e 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1575,44 +1575,53 @@ static struct regulator *create_regulator(struct regulator_dev *rdev, const char *supply_name) { struct regulator *regulator; - char buf[REG_STR_SIZE]; - int err, size; + int err; + + if (dev) { + char buf[REG_STR_SIZE]; + int size; + + size = snprintf(buf, REG_STR_SIZE, "%s-%s", + dev->kobj.name, supply_name); + if (size >= REG_STR_SIZE) + return NULL; + + supply_name = kstrdup(buf, GFP_KERNEL); + if (supply_name == NULL) + return NULL; + } else { + supply_name = kstrdup_const(supply_name, GFP_KERNEL); + if (supply_name == NULL) + return NULL; + } regulator = kzalloc(sizeof(*regulator), GFP_KERNEL); - if (regulator == NULL) + if (regulator == NULL) { + kfree(supply_name); return NULL; + } + + regulator->rdev = rdev; + regulator->supply_name = supply_name; regulator_lock(rdev); - regulator->rdev = rdev; list_add(®ulator->list, &rdev->consumer_list); + regulator_unlock(rdev); if (dev) { regulator->dev = dev; /* Add a link to the device sysfs entry */ - size = snprintf(buf, REG_STR_SIZE, "%s-%s", - dev->kobj.name, supply_name); - if (size >= REG_STR_SIZE) - goto overflow_err; - - regulator->supply_name = kstrdup(buf, GFP_KERNEL); - if (regulator->supply_name == NULL) - goto overflow_err; - err = sysfs_create_link_nowarn(&rdev->dev.kobj, &dev->kobj, - buf); + supply_name); if (err) { rdev_dbg(rdev, "could not add device link %s err %d\n", dev->kobj.name, err); /* non-fatal */ } - } else { - regulator->supply_name = kstrdup_const(supply_name, GFP_KERNEL); - if (regulator->supply_name == NULL) - goto overflow_err; } - regulator->debugfs = debugfs_create_dir(regulator->supply_name, + regulator->debugfs = debugfs_create_dir(supply_name, rdev->debugfs); if (!regulator->debugfs) { rdev_dbg(rdev, "Failed to create debugfs directory\n"); @@ -1637,13 +1646,7 @@ static struct regulator *create_regulator(struct regulator_dev *rdev, _regulator_is_enabled(rdev)) regulator->always_on = true; - regulator_unlock(rdev); return regulator; -overflow_err: - list_del(®ulator->list); - kfree(regulator); - regulator_unlock(rdev); - return NULL; } static int _regulator_get_enable_time(struct regulator_dev *rdev) From 047a71ff5e9d96ec23cfa1b4cab67e512e0edc37 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Micha=C5=82=20Miros=C5=82aw?= Date: Wed, 12 Aug 2020 03:31:36 +0200 Subject: [PATCH 097/130] regulator: push allocation in set_consumer_device_supply() out of lock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 5c06540165d443c6455123eb48e7f1a9b618ab34 upstream. Pull regulator_list_mutex into set_consumer_device_supply() and keep allocations outside of it. Fourth of the fs_reclaim deadlock case. Fixes: 45389c47526d ("regulator: core: Add early supply resolution for regulators") Signed-off-by: Michał Mirosław Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/f0380bdb3d60aeefa9693c4e234d2dcda7e56747.1597195321.git.mirq-linux@rere.qmqm.pl Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman --- drivers/regulator/core.c | 46 +++++++++++++++++++++++----------------- 1 file changed, 26 insertions(+), 20 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 96f4daa5de1e..790ee98db582 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1456,7 +1456,7 @@ static int set_consumer_device_supply(struct regulator_dev *rdev, const char *consumer_dev_name, const char *supply) { - struct regulator_map *node; + struct regulator_map *node, *new_node; int has_dev; if (supply == NULL) @@ -1467,6 +1467,22 @@ static int set_consumer_device_supply(struct regulator_dev *rdev, else has_dev = 0; + new_node = kzalloc(sizeof(struct regulator_map), GFP_KERNEL); + if (new_node == NULL) + return -ENOMEM; + + new_node->regulator = rdev; + new_node->supply = supply; + + if (has_dev) { + new_node->dev_name = kstrdup(consumer_dev_name, GFP_KERNEL); + if (new_node->dev_name == NULL) { + kfree(new_node); + return -ENOMEM; + } + } + + mutex_lock(®ulator_list_mutex); list_for_each_entry(node, ®ulator_map_list, list) { if (node->dev_name && consumer_dev_name) { if (strcmp(node->dev_name, consumer_dev_name) != 0) @@ -1484,26 +1500,19 @@ static int set_consumer_device_supply(struct regulator_dev *rdev, node->regulator->desc->name, supply, dev_name(&rdev->dev), rdev_get_name(rdev)); - return -EBUSY; + goto fail; } - node = kzalloc(sizeof(struct regulator_map), GFP_KERNEL); - if (node == NULL) - return -ENOMEM; + list_add(&new_node->list, ®ulator_map_list); + mutex_unlock(®ulator_list_mutex); - node->regulator = rdev; - node->supply = supply; - - if (has_dev) { - node->dev_name = kstrdup(consumer_dev_name, GFP_KERNEL); - if (node->dev_name == NULL) { - kfree(node); - return -ENOMEM; - } - } - - list_add(&node->list, ®ulator_map_list); return 0; + +fail: + mutex_unlock(®ulator_list_mutex); + kfree(new_node->dev_name); + kfree(new_node); + return -EBUSY; } static void unset_regulator_supplies(struct regulator_dev *rdev) @@ -5167,19 +5176,16 @@ regulator_register(const struct regulator_desc *regulator_desc, /* add consumers devices */ if (init_data) { - mutex_lock(®ulator_list_mutex); for (i = 0; i < init_data->num_consumer_supplies; i++) { ret = set_consumer_device_supply(rdev, init_data->consumer_supplies[i].dev_name, init_data->consumer_supplies[i].supply); if (ret < 0) { - mutex_unlock(®ulator_list_mutex); dev_err(dev, "Failed to set supply %s\n", init_data->consumer_supplies[i].supply); goto unset_supplies; } } - mutex_unlock(®ulator_list_mutex); } if (!rdev->desc->ops->get_voltage && From dfbb9cea5a4b07f6a5445d2f821041aae50b7632 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Micha=C5=82=20Miros=C5=82aw?= Date: Wed, 12 Aug 2020 03:31:36 +0200 Subject: [PATCH 098/130] regulator: plug of_node leak in regulator_register()'s error path MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit d3c731564e09b6c2ebefcd1344743a91a237d6dc upstream. By calling device_initialize() earlier and noting that kfree(NULL) is ok, we can save a bit of code in error handling and plug of_node leak. Fixed commit already did part of the work. Fixes: 9177514ce349 ("regulator: fix memory leak on error path of regulator_register()") Signed-off-by: Michał Mirosław Reviewed-by: Vladimir Zapolskiy Acked-by: Vladimir Zapolskiy Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/f5035b1b4d40745e66bacd571bbbb5e4644d21a1.1597195321.git.mirq-linux@rere.qmqm.pl Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman --- drivers/regulator/core.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 790ee98db582..f3658ae049c5 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -5065,6 +5065,7 @@ regulator_register(const struct regulator_desc *regulator_desc, ret = -ENOMEM; goto rinse; } + device_initialize(&rdev->dev); /* * Duplicate the config so the driver could override it after @@ -5072,9 +5073,8 @@ regulator_register(const struct regulator_desc *regulator_desc, */ config = kmemdup(cfg, sizeof(*cfg), GFP_KERNEL); if (config == NULL) { - kfree(rdev); ret = -ENOMEM; - goto rinse; + goto clean; } init_data = regulator_of_get_init_data(dev, regulator_desc, config, @@ -5086,10 +5086,8 @@ regulator_register(const struct regulator_desc *regulator_desc, * from a gpio extender or something else. */ if (PTR_ERR(init_data) == -EPROBE_DEFER) { - kfree(config); - kfree(rdev); ret = -EPROBE_DEFER; - goto rinse; + goto clean; } /* @@ -5142,7 +5140,6 @@ regulator_register(const struct regulator_desc *regulator_desc, } /* register with sysfs */ - device_initialize(&rdev->dev); rdev->dev.class = ®ulator_class; rdev->dev.parent = dev; dev_set_name(&rdev->dev, "regulator.%lu", @@ -5220,13 +5217,11 @@ wash: mutex_lock(®ulator_list_mutex); regulator_ena_gpio_free(rdev); mutex_unlock(®ulator_list_mutex); - put_device(&rdev->dev); - rdev = NULL; clean: if (dangling_of_gpiod) gpiod_put(config->ena_gpiod); - kfree(rdev); kfree(config); + put_device(&rdev->dev); rinse: if (dangling_cfg_gpiod) gpiod_put(cfg->ena_gpiod); From a467624aef02df2a8d7d6dc7b0b3625c8133b6b0 Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Mon, 31 Aug 2020 23:43:35 +0300 Subject: [PATCH 099/130] regulator: core: Fix slab-out-of-bounds in regulator_unlock_recursive() commit 0a7416f94707c60b9f66b01c0a505b7e41375f3a upstream. The recent commit 7d8196641ee1 ("regulator: Remove pointer table overallocation") changed the size of coupled_rdevs and now KASAN is able to detect slab-out-of-bounds problem in regulator_unlock_recursive(), which is a legit problem caused by a typo in the code. The recursive unlock function uses n_coupled value of a parent regulator for unlocking supply regulator, while supply's n_coupled should be used. In practice problem may only affect platforms that use coupled regulators. Cc: stable@vger.kernel.org # 5.0+ Fixes: f8702f9e4aa7 ("regulator: core: Use ww_mutex for regulators locking") Signed-off-by: Dmitry Osipenko Link: https://lore.kernel.org/r/20200831204335.19489-1-digetx@gmail.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman --- drivers/regulator/core.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index f3658ae049c5..55fc80de5ef1 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -235,8 +235,8 @@ static bool regulator_supply_is_couple(struct regulator_dev *rdev) static void regulator_unlock_recursive(struct regulator_dev *rdev, unsigned int n_coupled) { - struct regulator_dev *c_rdev; - int i; + struct regulator_dev *c_rdev, *supply_rdev; + int i, supply_n_coupled; for (i = n_coupled; i > 0; i--) { c_rdev = rdev->coupling_desc.coupled_rdevs[i - 1]; @@ -244,10 +244,13 @@ static void regulator_unlock_recursive(struct regulator_dev *rdev, if (!c_rdev) continue; - if (c_rdev->supply && !regulator_supply_is_couple(c_rdev)) - regulator_unlock_recursive( - c_rdev->supply->rdev, - c_rdev->coupling_desc.n_coupled); + if (c_rdev->supply && !regulator_supply_is_couple(c_rdev)) { + supply_rdev = c_rdev->supply->rdev; + supply_n_coupled = supply_rdev->coupling_desc.n_coupled; + + regulator_unlock_recursive(supply_rdev, + supply_n_coupled); + } regulator_unlock(c_rdev); } From fa4372668f581b687294c5a83851353070addcbc Mon Sep 17 00:00:00 2001 From: Varun Prakash Date: Tue, 25 Aug 2020 18:05:10 +0530 Subject: [PATCH 100/130] scsi: target: iscsi: Fix data digest calculation commit 5528d03183fe5243416c706f64b1faa518b05130 upstream. Current code does not consider 'page_off' in data digest calculation. To fix this, add a local variable 'first_sg' and set first_sg.offset to sg->offset + page_off. Link: https://lore.kernel.org/r/1598358910-3052-1-git-send-email-varun@chelsio.com Fixes: e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1") Cc: Reviewed-by: Mike Christie Signed-off-by: Varun Prakash Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman --- drivers/target/iscsi/iscsi_target.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index d1ce94c608a9..bca183369ad8 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -1386,14 +1386,27 @@ static u32 iscsit_do_crypto_hash_sg( sg = cmd->first_data_sg; page_off = cmd->first_data_sg_off; + if (data_length && page_off) { + struct scatterlist first_sg; + u32 len = min_t(u32, data_length, sg->length - page_off); + + sg_init_table(&first_sg, 1); + sg_set_page(&first_sg, sg_page(sg), len, sg->offset + page_off); + + ahash_request_set_crypt(hash, &first_sg, NULL, len); + crypto_ahash_update(hash); + + data_length -= len; + sg = sg_next(sg); + } + while (data_length) { - u32 cur_len = min_t(u32, data_length, (sg->length - page_off)); + u32 cur_len = min_t(u32, data_length, sg->length); ahash_request_set_crypt(hash, sg, NULL, cur_len); crypto_ahash_update(hash); data_length -= cur_len; - page_off = 0; /* iscsit_map_iovec has already checked for invalid sg pointers */ sg = sg_next(sg); } From a5bfcf2455d4249ded2de62480f59ccc1382d81a Mon Sep 17 00:00:00 2001 From: Hou Pu Date: Wed, 29 Jul 2020 09:03:43 -0400 Subject: [PATCH 101/130] scsi: target: iscsi: Fix hang in iscsit_access_np() when getting tpg->np_login_sem commit ed43ffea78dcc97db3f561da834f1a49c8961e33 upstream. The iSCSI target login thread might get stuck with the following stack: cat /proc/`pidof iscsi_np`/stack [<0>] down_interruptible+0x42/0x50 [<0>] iscsit_access_np+0xe3/0x167 [<0>] iscsi_target_locate_portal+0x695/0x8ac [<0>] __iscsi_target_login_thread+0x855/0xb82 [<0>] iscsi_target_login_thread+0x2f/0x5a [<0>] kthread+0xfa/0x130 [<0>] ret_from_fork+0x1f/0x30 This can be reproduced via the following steps: 1. Initiator A tries to log in to iqn1-tpg1 on port 3260. After finishing PDU exchange in the login thread and before the negotiation is finished the the network link goes down. At this point A has not finished login and tpg->np_login_sem is held. 2. Initiator B tries to log in to iqn2-tpg1 on port 3260. After finishing PDU exchange in the login thread the target expects to process remaining login PDUs in workqueue context. 3. Initiator A' tries to log in to iqn1-tpg1 on port 3260 from a new socket. A' will wait for tpg->np_login_sem with np->np_login_timer loaded to wait for at most 15 seconds. The lock is held by A so A' eventually times out. 4. Before A' got timeout initiator B gets negotiation failed and calls iscsi_target_login_drop()->iscsi_target_login_sess_out(). The np->np_login_timer is canceled and initiator A' will hang forever. Because A' is now in the login thread, no new login requests can be serviced. Fix this by moving iscsi_stop_login_thread_timer() out of iscsi_target_login_sess_out(). Also remove iscsi_np parameter from iscsi_target_login_sess_out(). Link: https://lore.kernel.org/r/20200729130343.24976-1-houpu@bytedance.com Cc: stable@vger.kernel.org Reviewed-by: Mike Christie Signed-off-by: Hou Pu Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman --- drivers/target/iscsi/iscsi_target_login.c | 6 +++--- drivers/target/iscsi/iscsi_target_login.h | 3 +-- drivers/target/iscsi/iscsi_target_nego.c | 3 +-- 3 files changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/iscsi/iscsi_target_login.c index 731ee67fe914..0cc5ea195273 100644 --- a/drivers/target/iscsi/iscsi_target_login.c +++ b/drivers/target/iscsi/iscsi_target_login.c @@ -1172,7 +1172,7 @@ void iscsit_free_conn(struct iscsi_conn *conn) } void iscsi_target_login_sess_out(struct iscsi_conn *conn, - struct iscsi_np *np, bool zero_tsih, bool new_sess) + bool zero_tsih, bool new_sess) { if (!new_sess) goto old_sess_out; @@ -1190,7 +1190,6 @@ void iscsi_target_login_sess_out(struct iscsi_conn *conn, conn->sess = NULL; old_sess_out: - iscsi_stop_login_thread_timer(np); /* * If login negotiation fails check if the Time2Retain timer * needs to be restarted. @@ -1430,8 +1429,9 @@ static int __iscsi_target_login_thread(struct iscsi_np *np) new_sess_out: new_sess = true; old_sess_out: + iscsi_stop_login_thread_timer(np); tpg_np = conn->tpg_np; - iscsi_target_login_sess_out(conn, np, zero_tsih, new_sess); + iscsi_target_login_sess_out(conn, zero_tsih, new_sess); new_sess = false; if (tpg) { diff --git a/drivers/target/iscsi/iscsi_target_login.h b/drivers/target/iscsi/iscsi_target_login.h index 3b8e3639ff5d..fc95e6150253 100644 --- a/drivers/target/iscsi/iscsi_target_login.h +++ b/drivers/target/iscsi/iscsi_target_login.h @@ -22,8 +22,7 @@ extern int iscsit_put_login_tx(struct iscsi_conn *, struct iscsi_login *, u32); extern void iscsit_free_conn(struct iscsi_conn *); extern int iscsit_start_kthreads(struct iscsi_conn *); extern void iscsi_post_login_handler(struct iscsi_np *, struct iscsi_conn *, u8); -extern void iscsi_target_login_sess_out(struct iscsi_conn *, struct iscsi_np *, - bool, bool); +extern void iscsi_target_login_sess_out(struct iscsi_conn *, bool, bool); extern int iscsi_target_login_thread(void *); extern void iscsi_handle_login_thread_timeout(struct timer_list *t); diff --git a/drivers/target/iscsi/iscsi_target_nego.c b/drivers/target/iscsi/iscsi_target_nego.c index 685d771b51d4..e32d93b92742 100644 --- a/drivers/target/iscsi/iscsi_target_nego.c +++ b/drivers/target/iscsi/iscsi_target_nego.c @@ -535,12 +535,11 @@ static bool iscsi_target_sk_check_and_clear(struct iscsi_conn *conn, unsigned in static void iscsi_target_login_drop(struct iscsi_conn *conn, struct iscsi_login *login) { - struct iscsi_np *np = login->np; bool zero_tsih = login->zero_tsih; iscsi_remove_failed_auth_entry(conn); iscsi_target_nego_release(conn); - iscsi_target_login_sess_out(conn, np, zero_tsih, true); + iscsi_target_login_sess_out(conn, zero_tsih, true); } struct conn_timeout { From 701b385f68774ce1dff25d7f20085a95ac4022cf Mon Sep 17 00:00:00 2001 From: Yan Zhao Date: Wed, 18 Mar 2020 13:48:26 +0800 Subject: [PATCH 102/130] drm/i915/gvt: do not check len & max_len for lri commit dbafc67307ec06036b25b223a251af03fe07969a upstream. lri ususally of variable len and far exceeding 127 dwords. Fixes: 00a33be40634 ("drm/i915/gvt: Add valid length check for MI variable commands") Signed-off-by: Yan Zhao Acked-by: Zhenyu Wang Signed-off-by: Zhenyu Wang Link: http://patchwork.freedesktop.org/patch/msgid/20200304095121.21609-1-yan.y.zhao@intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/i915/gvt/cmd_parser.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/cmd_parser.c b/drivers/gpu/drm/i915/gvt/cmd_parser.c index fc29a3705354..56cd14cacf5e 100644 --- a/drivers/gpu/drm/i915/gvt/cmd_parser.c +++ b/drivers/gpu/drm/i915/gvt/cmd_parser.c @@ -963,18 +963,6 @@ static int cmd_handler_lri(struct parser_exec_state *s) int i, ret = 0; int cmd_len = cmd_length(s); struct intel_gvt *gvt = s->vgpu->gvt; - u32 valid_len = CMD_LEN(1); - - /* - * Official intel docs are somewhat sloppy , check the definition of - * MI_LOAD_REGISTER_IMM. - */ - #define MAX_VALID_LEN 127 - if ((cmd_len < valid_len) || (cmd_len > MAX_VALID_LEN)) { - gvt_err("len is not valid: len=%u valid_len=%u\n", - cmd_len, valid_len); - return -EFAULT; - } for (i = 1; i < cmd_len; i += 2) { if (IS_BROADWELL(gvt->dev_priv) && s->ring_id != RCS0) { From 404ab35baae47b058a09530c962c4f02d78eab47 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 20 Aug 2020 22:31:44 +0200 Subject: [PATCH 103/130] drm/tve200: Stabilize enable/disable commit f71800228dc74711c3df43854ce7089562a3bc2d upstream. The TVE200 will occasionally print a bunch of lost interrupts and similar dmesg messages, sometimes during boot and sometimes after disabling and coming back to enablement. This is probably because the hardware is left in an unknown state by the boot loader that displays a logo. This can be fixed by bringing the controller into a known state by resetting the controller while enabling it. We retry reset 5 times like the vendor driver does. We also put the controller into reset before de-clocking it and clear all interrupts before enabling the vblank IRQ. This makes the video enable/disable/enable cycle rock solid on the D-Link DIR-685. Tested extensively. Signed-off-by: Linus Walleij Acked-by: Daniel Vetter Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20200820203144.271081-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/tve200/tve200_display.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/tve200/tve200_display.c b/drivers/gpu/drm/tve200/tve200_display.c index d733bbc4ac0e..17ff24d999d1 100644 --- a/drivers/gpu/drm/tve200/tve200_display.c +++ b/drivers/gpu/drm/tve200/tve200_display.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -130,9 +131,25 @@ static void tve200_display_enable(struct drm_simple_display_pipe *pipe, struct drm_connector *connector = priv->connector; u32 format = fb->format->format; u32 ctrl1 = 0; + int retries; clk_prepare_enable(priv->clk); + /* Reset the TVE200 and wait for it to come back online */ + writel(TVE200_CTRL_4_RESET, priv->regs + TVE200_CTRL_4); + for (retries = 0; retries < 5; retries++) { + usleep_range(30000, 50000); + if (readl(priv->regs + TVE200_CTRL_4) & TVE200_CTRL_4_RESET) + continue; + else + break; + } + if (retries == 5 && + readl(priv->regs + TVE200_CTRL_4) & TVE200_CTRL_4_RESET) { + dev_err(drm->dev, "can't get hardware out of reset\n"); + return; + } + /* Function 1 */ ctrl1 |= TVE200_CTRL_CSMODE; /* Interlace mode for CCIR656: parameterize? */ @@ -230,8 +247,9 @@ static void tve200_display_disable(struct drm_simple_display_pipe *pipe) drm_crtc_vblank_off(crtc); - /* Disable and Power Down */ + /* Disable put into reset and Power Down */ writel(0, priv->regs + TVE200_CTRL); + writel(TVE200_CTRL_4_RESET, priv->regs + TVE200_CTRL_4); clk_disable_unprepare(priv->clk); } @@ -279,6 +297,8 @@ static int tve200_display_enable_vblank(struct drm_simple_display_pipe *pipe) struct drm_device *drm = crtc->dev; struct tve200_drm_dev_private *priv = drm->dev_private; + /* Clear any IRQs and enable */ + writel(0xFF, priv->regs + TVE200_INT_CLR); writel(TVE200_INT_V_STATUS, priv->regs + TVE200_INT_EN); return 0; } From becb3bbb29115d459c7f109c3b4f2d0129bb1443 Mon Sep 17 00:00:00 2001 From: Jordan Crouse Date: Thu, 3 Sep 2020 20:03:12 -0600 Subject: [PATCH 104/130] drm/msm: Disable preemption on all 5xx targets commit 7b3f3948c8b7053d771acc9f79810cc410f5e2e0 upstream. Temporarily disable preemption on a5xx targets pending some improvements to protect the RPTR shadow from being corrupted. Cc: stable@vger.kernel.org Signed-off-by: Jordan Crouse Signed-off-by: Rob Clark Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/msm/adreno/a5xx_gpu.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c index 7829247de60e..4a484b06319f 100644 --- a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c @@ -1451,7 +1451,8 @@ struct msm_gpu *a5xx_gpu_init(struct drm_device *dev) check_speed_bin(&pdev->dev); - ret = adreno_gpu_init(dev, pdev, adreno_gpu, &funcs, 4); + /* Restricting nr_rings to 1 to temporarily disable preemption */ + ret = adreno_gpu_init(dev, pdev, adreno_gpu, &funcs, 1); if (ret) { a5xx_destroy(&(a5xx_gpu->base.base)); return ERR_PTR(ret); From c724eb78c1ec61fd579bb62837a7e6f34d60087a Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Thu, 3 Sep 2020 11:20:07 +0300 Subject: [PATCH 105/130] mmc: sdio: Use mmc_pre_req() / mmc_post_req() commit f0c393e2104e48c8a881719a8bd37996f71b0aee upstream. SDHCI changed from using a tasklet to finish requests, to using an IRQ thread i.e. commit c07a48c2651965 ("mmc: sdhci: Remove finish_tasklet"). Because this increased the latency to complete requests, a preparatory change was made to complete the request from the IRQ handler if possible i.e. commit 19d2f695f4e827 ("mmc: sdhci: Call mmc_request_done() from IRQ handler if possible"). That alleviated the situation for MMC block devices because the MMC block driver makes use of mmc_pre_req() and mmc_post_req() so that successful requests are completed in the IRQ handler and any DMA unmapping is handled separately in mmc_post_req(). However SDIO was still affected, and an example has been reported with up to 20% degradation in performance. Looking at SDIO I/O helper functions, sdio_io_rw_ext_helper() appeared to be a possible candidate for making use of asynchronous requests within its I/O loops, but analysis revealed that these loops almost never iterate more than once, so the complexity of the change would not be warrented. Instead, mmc_pre_req() and mmc_post_req() are added before and after I/O submission (mmc_wait_for_req) in mmc_io_rw_extended(). This still has the potential benefit of reducing the duration of interrupt handlers, as well as addressing the latency issue for SDHCI. It also seems a more reasonable solution than forcing drivers to do everything in the IRQ handler. Reported-by: Dmitry Osipenko Fixes: c07a48c2651965 ("mmc: sdhci: Remove finish_tasklet") Signed-off-by: Adrian Hunter Tested-by: Dmitry Osipenko Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200903082007.18715-1-adrian.hunter@intel.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman --- drivers/mmc/core/sdio_ops.c | 39 +++++++++++++++++++++---------------- 1 file changed, 22 insertions(+), 17 deletions(-) diff --git a/drivers/mmc/core/sdio_ops.c b/drivers/mmc/core/sdio_ops.c index 93d346c01110..4c229dd2b6e5 100644 --- a/drivers/mmc/core/sdio_ops.c +++ b/drivers/mmc/core/sdio_ops.c @@ -121,6 +121,7 @@ int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn, struct sg_table sgtable; unsigned int nents, left_size, i; unsigned int seg_size = card->host->max_seg_size; + int err; WARN_ON(blksz == 0); @@ -170,28 +171,32 @@ int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn, mmc_set_data_timeout(&data, card); + mmc_pre_req(card->host, &mrq); + mmc_wait_for_req(card->host, &mrq); + if (cmd.error) + err = cmd.error; + else if (data.error) + err = data.error; + else if (mmc_host_is_spi(card->host)) + /* host driver already reported errors */ + err = 0; + else if (cmd.resp[0] & R5_ERROR) + err = -EIO; + else if (cmd.resp[0] & R5_FUNCTION_NUMBER) + err = -EINVAL; + else if (cmd.resp[0] & R5_OUT_OF_RANGE) + err = -ERANGE; + else + err = 0; + + mmc_post_req(card->host, &mrq, err); + if (nents > 1) sg_free_table(&sgtable); - if (cmd.error) - return cmd.error; - if (data.error) - return data.error; - - if (mmc_host_is_spi(card->host)) { - /* host driver already reported errors */ - } else { - if (cmd.resp[0] & R5_ERROR) - return -EIO; - if (cmd.resp[0] & R5_FUNCTION_NUMBER) - return -EINVAL; - if (cmd.resp[0] & R5_OUT_OF_RANGE) - return -ERANGE; - } - - return 0; + return err; } int sdio_reset(struct mmc_host *host) From c2fb443bde82c4f6b2390856339bae152a0c0641 Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Thu, 3 Sep 2020 13:20:29 +1200 Subject: [PATCH 106/130] mmc: sdhci-of-esdhc: Don't walk device-tree on every interrupt commit 060522d89705f9d961ef1762dc1468645dd21fbd upstream. Commit b214fe592ab7 ("mmc: sdhci-of-esdhc: add erratum eSDHC7 support") added code to check for a specific compatible string in the device-tree on every esdhc interrupat. Instead of doing this record the quirk in struct sdhci_esdhc and lookup the struct in esdhc_irq. Signed-off-by: Chris Packham Link: https://lore.kernel.org/r/20200903012029.25673-1-chris.packham@alliedtelesis.co.nz Fixes: b214fe592ab7 ("mmc: sdhci-of-esdhc: add erratum eSDHC7 support") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman --- drivers/mmc/host/sdhci-of-esdhc.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index fd1251ec8471..66ad46d0ba88 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -81,6 +81,7 @@ struct sdhci_esdhc { bool quirk_tuning_erratum_type2; bool quirk_ignore_data_inhibit; bool quirk_delay_before_data_reset; + bool quirk_trans_complete_erratum; bool in_sw_tuning; unsigned int peripheral_clock; const struct esdhc_clk_fixup *clk_fixup; @@ -1082,10 +1083,11 @@ static void esdhc_set_uhs_signaling(struct sdhci_host *host, static u32 esdhc_irq(struct sdhci_host *host, u32 intmask) { + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); u32 command; - if (of_find_compatible_node(NULL, NULL, - "fsl,p2020-esdhc")) { + if (esdhc->quirk_trans_complete_erratum) { command = SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND)); if (command == MMC_WRITE_MULTIPLE_BLOCK && @@ -1239,8 +1241,10 @@ static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host) esdhc->clk_fixup = match->data; np = pdev->dev.of_node; - if (of_device_is_compatible(np, "fsl,p2020-esdhc")) + if (of_device_is_compatible(np, "fsl,p2020-esdhc")) { esdhc->quirk_delay_before_data_reset = true; + esdhc->quirk_trans_complete_erratum = true; + } clk = of_clk_get(np, 0); if (!IS_ERR(clk)) { From ea3d3bf85669195247ad6a522f4e4209695edca2 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Thu, 3 Sep 2020 13:24:11 +0200 Subject: [PATCH 107/130] rbd: require global CAP_SYS_ADMIN for mapping and unmapping commit f44d04e696feaf13d192d942c4f14ad2e117065a upstream. It turns out that currently we rely only on sysfs attribute permissions: $ ll /sys/bus/rbd/{add*,remove*} --w------- 1 root root 4096 Sep 3 20:37 /sys/bus/rbd/add --w------- 1 root root 4096 Sep 3 20:37 /sys/bus/rbd/add_single_major --w------- 1 root root 4096 Sep 3 20:37 /sys/bus/rbd/remove --w------- 1 root root 4096 Sep 3 20:38 /sys/bus/rbd/remove_single_major This means that images can be mapped and unmapped (i.e. block devices can be created and deleted) by a UID 0 process even after it drops all privileges or by any process with CAP_DAC_OVERRIDE in its user namespace as long as UID 0 is mapped into that user namespace. Be consistent with other virtual block devices (loop, nbd, dm, md, etc) and require CAP_SYS_ADMIN in the initial user namespace for mapping and unmapping, and also for dumping the configuration string and refreshing the image header. Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov Reviewed-by: Jeff Layton Signed-off-by: Greg Kroah-Hartman --- drivers/block/rbd.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 274beda31c35..bf2f0373a3b2 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -5280,6 +5280,9 @@ static ssize_t rbd_config_info_show(struct device *dev, { struct rbd_device *rbd_dev = dev_to_rbd_dev(dev); + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + return sprintf(buf, "%s\n", rbd_dev->config_info); } @@ -5391,6 +5394,9 @@ static ssize_t rbd_image_refresh(struct device *dev, struct rbd_device *rbd_dev = dev_to_rbd_dev(dev); int ret; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + ret = rbd_dev_refresh(rbd_dev); if (ret) return ret; @@ -7059,6 +7065,9 @@ static ssize_t do_rbd_add(struct bus_type *bus, struct rbd_client *rbdc; int rc; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + if (!try_module_get(THIS_MODULE)) return -ENODEV; @@ -7208,6 +7217,9 @@ static ssize_t do_rbd_remove(struct bus_type *bus, bool force = false; int ret; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + dev_id = -1; opt_buf[0] = '\0'; sscanf(buf, "%d %5s", &dev_id, opt_buf); From 616a0c13e43219a9803c993e256637d3e8117296 Mon Sep 17 00:00:00 2001 From: Yi Zhang Date: Thu, 20 Aug 2020 23:36:46 +0800 Subject: [PATCH 108/130] RDMA/rxe: Fix the parent sysfs read when the interface has 15 chars commit 60b1af64eb35074a4f2d41cc1e503a7671e68963 upstream. 'parent' sysfs reads will yield '\0' bytes when the interface name has 15 chars, and there will no "\n" output. To reproduce, create one interface with 15 chars: [root@test ~]# ip a s enp0s29u1u7u3c2 2: enp0s29u1u7u3c2: mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 1000 link/ether 02:21:28:57:47:17 brd ff:ff:ff:ff:ff:ff inet6 fe80::ac41:338f:5bcd:c222/64 scope link noprefixroute valid_lft forever preferred_lft forever [root@test ~]# modprobe rdma_rxe [root@test ~]# echo enp0s29u1u7u3c2 > /sys/module/rdma_rxe/parameters/add [root@test ~]# cat /sys/class/infiniband/rxe0/parent enp0s29u1u7u3c2[root@test ~]# [root@test ~]# f="/sys/class/infiniband/rxe0/parent" [root@test ~]# echo "$(<"$f")" -bash: warning: command substitution: ignored null byte in input enp0s29u1u7u3c2 Use scnprintf and PAGE_SIZE to fill the sysfs output buffer. Cc: stable@vger.kernel.org Fixes: 8700e3e7c485 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20200820153646.31316-1-yi.zhang@redhat.com Suggested-by: Jason Gunthorpe Signed-off-by: Yi Zhang Reviewed-by: Bart Van Assche Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman --- drivers/infiniband/sw/rxe/rxe_verbs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/sw/rxe/rxe_verbs.c b/drivers/infiniband/sw/rxe/rxe_verbs.c index 71358b0b8910..d1fe57ac87f5 100644 --- a/drivers/infiniband/sw/rxe/rxe_verbs.c +++ b/drivers/infiniband/sw/rxe/rxe_verbs.c @@ -1078,7 +1078,7 @@ static ssize_t parent_show(struct device *device, struct rxe_dev *rxe = rdma_device_to_drv_device(device, struct rxe_dev, ib_dev); - return snprintf(buf, 16, "%s\n", rxe_parent_name(rxe, 1)); + return scnprintf(buf, PAGE_SIZE, "%s\n", rxe_parent_name(rxe, 1)); } static DEVICE_ATTR_RO(parent); From a0f6bdafaa4c5bb057c8aea5ac2ddfc52a5355f5 Mon Sep 17 00:00:00 2001 From: Mark Bloch Date: Mon, 24 Aug 2020 14:02:29 +0300 Subject: [PATCH 109/130] RDMA/mlx4: Read pkey table length instead of hardcoded value commit ec78b3bd66bc9a015505df0ef0eb153d9e64b03b upstream. If the pkey_table is not available (which is the case when RoCE is not supported), the cited commit caused a regression where mlx4_devices without RoCE are not created. Fix this by returning a pkey table length of zero in procedure eth_link_query_port() if the pkey-table length reported by the device is zero. Link: https://lore.kernel.org/r/20200824110229.1094376-1-leon@kernel.org Cc: Fixes: 1901b91f9982 ("IB/core: Fix potential NULL pointer dereference in pkey cache") Fixes: fa417f7b520e ("IB/mlx4: Add support for IBoE") Signed-off-by: Mark Bloch Reviewed-by: Maor Gottlieb Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman --- drivers/infiniband/hw/mlx4/main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c index 61a1b0bdede0..b8274c6fc43e 100644 --- a/drivers/infiniband/hw/mlx4/main.c +++ b/drivers/infiniband/hw/mlx4/main.c @@ -781,7 +781,8 @@ static int eth_link_query_port(struct ib_device *ibdev, u8 port, props->ip_gids = true; props->gid_tbl_len = mdev->dev->caps.gid_table_len[port]; props->max_msg_sz = mdev->dev->caps.max_msg_sz; - props->pkey_tbl_len = 1; + if (mdev->dev->caps.pkey_table_len[port]) + props->pkey_tbl_len = 1; props->max_mtu = IB_MTU_4096; props->max_vl_num = 2; props->state = IB_PORT_DOWN; From cf5a7ded53652c3d63d7243944c6a8ec1f0ef392 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 7 Sep 2020 11:45:27 -0700 Subject: [PATCH 110/130] fbcon: remove soft scrollback code commit 50145474f6ef4a9c19205b173da6264a644c7489 upstream. This (and the VGA soft scrollback) turns out to have various nasty small special cases that nobody really is willing to fight. The soft scrollback code was really useful a few decades ago when you typically used the console interactively as the main way to interact with the machine, but that just isn't the case any more. So it's not worth dragging along. Tested-by: Yuan Ming Tested-by: Willy Tarreau Acked-by: Bartlomiej Zolnierkiewicz Acked-by: Daniel Vetter Reviewed-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman --- drivers/video/fbdev/core/fbcon.c | 334 +------------------------------ 1 file changed, 4 insertions(+), 330 deletions(-) diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c index 31f00d72f149..5751952985db 100644 --- a/drivers/video/fbdev/core/fbcon.c +++ b/drivers/video/fbdev/core/fbcon.c @@ -122,12 +122,6 @@ static int logo_lines; /* logo_shown is an index to vc_cons when >= 0; otherwise follows FBCON_LOGO enums. */ static int logo_shown = FBCON_LOGO_CANSHOW; -/* Software scrollback */ -static int fbcon_softback_size = 32768; -static unsigned long softback_buf, softback_curr; -static unsigned long softback_in; -static unsigned long softback_top, softback_end; -static int softback_lines; /* console mappings */ static int first_fb_vc; static int last_fb_vc = MAX_NR_CONSOLES - 1; @@ -167,8 +161,6 @@ static int margin_color; static const struct consw fb_con; -#define CM_SOFTBACK (8) - #define advance_row(p, delta) (unsigned short *)((unsigned long)(p) + (delta) * vc->vc_size_row) static int fbcon_set_origin(struct vc_data *); @@ -373,18 +365,6 @@ static int get_color(struct vc_data *vc, struct fb_info *info, return color; } -static void fbcon_update_softback(struct vc_data *vc) -{ - int l = fbcon_softback_size / vc->vc_size_row; - - if (l > 5) - softback_end = softback_buf + l * vc->vc_size_row; - else - /* Smaller scrollback makes no sense, and 0 would screw - the operation totally */ - softback_top = 0; -} - static void fb_flashcursor(struct work_struct *work) { struct fb_info *info = container_of(work, struct fb_info, queue); @@ -414,7 +394,7 @@ static void fb_flashcursor(struct work_struct *work) c = scr_readw((u16 *) vc->vc_pos); mode = (!ops->cursor_flash || ops->cursor_state.enable) ? CM_ERASE : CM_DRAW; - ops->cursor(vc, info, mode, softback_lines, get_color(vc, info, c, 1), + ops->cursor(vc, info, mode, 0, get_color(vc, info, c, 1), get_color(vc, info, c, 0)); console_unlock(); } @@ -471,13 +451,7 @@ static int __init fb_console_setup(char *this_opt) } if (!strncmp(options, "scrollback:", 11)) { - options += 11; - if (*options) { - fbcon_softback_size = simple_strtoul(options, &options, 0); - if (*options == 'k' || *options == 'K') { - fbcon_softback_size *= 1024; - } - } + pr_warn("Ignoring scrollback size option\n"); continue; } @@ -1016,31 +990,6 @@ static const char *fbcon_startup(void) set_blitting_type(vc, info); - if (info->fix.type != FB_TYPE_TEXT) { - if (fbcon_softback_size) { - if (!softback_buf) { - softback_buf = - (unsigned long) - kvmalloc(fbcon_softback_size, - GFP_KERNEL); - if (!softback_buf) { - fbcon_softback_size = 0; - softback_top = 0; - } - } - } else { - if (softback_buf) { - kvfree((void *) softback_buf); - softback_buf = 0; - softback_top = 0; - } - } - if (softback_buf) - softback_in = softback_top = softback_curr = - softback_buf; - softback_lines = 0; - } - /* Setup default font */ if (!p->fontdata && !vc->vc_font.data) { if (!fontname[0] || !(font = find_font(fontname))) @@ -1214,9 +1163,6 @@ static void fbcon_init(struct vc_data *vc, int init) if (logo) fbcon_prepare_logo(vc, info, cols, rows, new_cols, new_rows); - if (vc == svc && softback_buf) - fbcon_update_softback(vc); - if (ops->rotate_font && ops->rotate_font(info, vc)) { ops->rotate = FB_ROTATE_UR; set_blitting_type(vc, info); @@ -1379,7 +1325,6 @@ static void fbcon_cursor(struct vc_data *vc, int mode) { struct fb_info *info = registered_fb[con2fb_map[vc->vc_num]]; struct fbcon_ops *ops = info->fbcon_par; - int y; int c = scr_readw((u16 *) vc->vc_pos); ops->cur_blink_jiffies = msecs_to_jiffies(vc->vc_cur_blink_ms); @@ -1393,16 +1338,8 @@ static void fbcon_cursor(struct vc_data *vc, int mode) fbcon_add_cursor_timer(info); ops->cursor_flash = (mode == CM_ERASE) ? 0 : 1; - if (mode & CM_SOFTBACK) { - mode &= ~CM_SOFTBACK; - y = softback_lines; - } else { - if (softback_lines) - fbcon_set_origin(vc); - y = 0; - } - ops->cursor(vc, info, mode, y, get_color(vc, info, c, 1), + ops->cursor(vc, info, mode, 0, get_color(vc, info, c, 1), get_color(vc, info, c, 0)); } @@ -1473,8 +1410,6 @@ static void fbcon_set_disp(struct fb_info *info, struct fb_var_screeninfo *var, if (con_is_visible(vc)) { update_screen(vc); - if (softback_buf) - fbcon_update_softback(vc); } } @@ -1612,99 +1547,6 @@ static __inline__ void ypan_down_redraw(struct vc_data *vc, int t, int count) scrollback_current = 0; } -static void fbcon_redraw_softback(struct vc_data *vc, struct fbcon_display *p, - long delta) -{ - int count = vc->vc_rows; - unsigned short *d, *s; - unsigned long n; - int line = 0; - - d = (u16 *) softback_curr; - if (d == (u16 *) softback_in) - d = (u16 *) vc->vc_origin; - n = softback_curr + delta * vc->vc_size_row; - softback_lines -= delta; - if (delta < 0) { - if (softback_curr < softback_top && n < softback_buf) { - n += softback_end - softback_buf; - if (n < softback_top) { - softback_lines -= - (softback_top - n) / vc->vc_size_row; - n = softback_top; - } - } else if (softback_curr >= softback_top - && n < softback_top) { - softback_lines -= - (softback_top - n) / vc->vc_size_row; - n = softback_top; - } - } else { - if (softback_curr > softback_in && n >= softback_end) { - n += softback_buf - softback_end; - if (n > softback_in) { - n = softback_in; - softback_lines = 0; - } - } else if (softback_curr <= softback_in && n > softback_in) { - n = softback_in; - softback_lines = 0; - } - } - if (n == softback_curr) - return; - softback_curr = n; - s = (u16 *) softback_curr; - if (s == (u16 *) softback_in) - s = (u16 *) vc->vc_origin; - while (count--) { - unsigned short *start; - unsigned short *le; - unsigned short c; - int x = 0; - unsigned short attr = 1; - - start = s; - le = advance_row(s, 1); - do { - c = scr_readw(s); - if (attr != (c & 0xff00)) { - attr = c & 0xff00; - if (s > start) { - fbcon_putcs(vc, start, s - start, - line, x); - x += s - start; - start = s; - } - } - if (c == scr_readw(d)) { - if (s > start) { - fbcon_putcs(vc, start, s - start, - line, x); - x += s - start + 1; - start = s + 1; - } else { - x++; - start++; - } - } - s++; - d++; - } while (s < le); - if (s > start) - fbcon_putcs(vc, start, s - start, line, x); - line++; - if (d == (u16 *) softback_end) - d = (u16 *) softback_buf; - if (d == (u16 *) softback_in) - d = (u16 *) vc->vc_origin; - if (s == (u16 *) softback_end) - s = (u16 *) softback_buf; - if (s == (u16 *) softback_in) - s = (u16 *) vc->vc_origin; - } -} - static void fbcon_redraw_move(struct vc_data *vc, struct fbcon_display *p, int line, int count, int dy) { @@ -1844,31 +1686,6 @@ static void fbcon_redraw(struct vc_data *vc, struct fbcon_display *p, } } -static inline void fbcon_softback_note(struct vc_data *vc, int t, - int count) -{ - unsigned short *p; - - if (vc->vc_num != fg_console) - return; - p = (unsigned short *) (vc->vc_origin + t * vc->vc_size_row); - - while (count) { - scr_memcpyw((u16 *) softback_in, p, vc->vc_size_row); - count--; - p = advance_row(p, 1); - softback_in += vc->vc_size_row; - if (softback_in == softback_end) - softback_in = softback_buf; - if (softback_in == softback_top) { - softback_top += vc->vc_size_row; - if (softback_top == softback_end) - softback_top = softback_buf; - } - } - softback_curr = softback_in; -} - static bool fbcon_scroll(struct vc_data *vc, unsigned int t, unsigned int b, enum con_scroll dir, unsigned int count) { @@ -1891,8 +1708,6 @@ static bool fbcon_scroll(struct vc_data *vc, unsigned int t, unsigned int b, case SM_UP: if (count > vc->vc_rows) /* Maximum realistic size */ count = vc->vc_rows; - if (softback_top) - fbcon_softback_note(vc, t, count); if (logo_shown >= 0) goto redraw_up; switch (p->scrollmode) { @@ -2263,14 +2078,6 @@ static int fbcon_switch(struct vc_data *vc) info = registered_fb[con2fb_map[vc->vc_num]]; ops = info->fbcon_par; - if (softback_top) { - if (softback_lines) - fbcon_set_origin(vc); - softback_top = softback_curr = softback_in = softback_buf; - softback_lines = 0; - fbcon_update_softback(vc); - } - if (logo_shown >= 0) { struct vc_data *conp2 = vc_cons[logo_shown].d; @@ -2593,9 +2400,6 @@ static int fbcon_do_set_font(struct vc_data *vc, int w, int h, int cnt; char *old_data = NULL; - if (con_is_visible(vc) && softback_lines) - fbcon_set_origin(vc); - resize = (w != vc->vc_font.width) || (h != vc->vc_font.height); if (p->userfont) old_data = vc->vc_font.data; @@ -2621,8 +2425,6 @@ static int fbcon_do_set_font(struct vc_data *vc, int w, int h, cols /= w; rows /= h; vc_resize(vc, cols, rows); - if (con_is_visible(vc) && softback_buf) - fbcon_update_softback(vc); } else if (con_is_visible(vc) && vc->vc_mode == KD_TEXT) { fbcon_clear_margins(vc, 0); @@ -2781,19 +2583,7 @@ static void fbcon_set_palette(struct vc_data *vc, const unsigned char *table) static u16 *fbcon_screen_pos(struct vc_data *vc, int offset) { - unsigned long p; - int line; - - if (vc->vc_num != fg_console || !softback_lines) - return (u16 *) (vc->vc_origin + offset); - line = offset / vc->vc_size_row; - if (line >= softback_lines) - return (u16 *) (vc->vc_origin + offset - - softback_lines * vc->vc_size_row); - p = softback_curr + offset; - if (p >= softback_end) - p += softback_buf - softback_end; - return (u16 *) p; + return (u16 *) (vc->vc_origin + offset); } static unsigned long fbcon_getxy(struct vc_data *vc, unsigned long pos, @@ -2807,22 +2597,7 @@ static unsigned long fbcon_getxy(struct vc_data *vc, unsigned long pos, x = offset % vc->vc_cols; y = offset / vc->vc_cols; - if (vc->vc_num == fg_console) - y += softback_lines; ret = pos + (vc->vc_cols - x) * 2; - } else if (vc->vc_num == fg_console && softback_lines) { - unsigned long offset = pos - softback_curr; - - if (pos < softback_curr) - offset += softback_end - softback_buf; - offset /= 2; - x = offset % vc->vc_cols; - y = offset / vc->vc_cols; - ret = pos + (vc->vc_cols - x) * 2; - if (ret == softback_end) - ret = softback_buf; - if (ret == softback_in) - ret = vc->vc_origin; } else { /* Should not happen */ x = y = 0; @@ -2850,106 +2625,11 @@ static void fbcon_invert_region(struct vc_data *vc, u16 * p, int cnt) a = ((a) & 0x88ff) | (((a) & 0x7000) >> 4) | (((a) & 0x0700) << 4); scr_writew(a, p++); - if (p == (u16 *) softback_end) - p = (u16 *) softback_buf; - if (p == (u16 *) softback_in) - p = (u16 *) vc->vc_origin; } } -static void fbcon_scrolldelta(struct vc_data *vc, int lines) -{ - struct fb_info *info = registered_fb[con2fb_map[fg_console]]; - struct fbcon_ops *ops = info->fbcon_par; - struct fbcon_display *disp = &fb_display[fg_console]; - int offset, limit, scrollback_old; - - if (softback_top) { - if (vc->vc_num != fg_console) - return; - if (vc->vc_mode != KD_TEXT || !lines) - return; - if (logo_shown >= 0) { - struct vc_data *conp2 = vc_cons[logo_shown].d; - - if (conp2->vc_top == logo_lines - && conp2->vc_bottom == conp2->vc_rows) - conp2->vc_top = 0; - if (logo_shown == vc->vc_num) { - unsigned long p, q; - int i; - - p = softback_in; - q = vc->vc_origin + - logo_lines * vc->vc_size_row; - for (i = 0; i < logo_lines; i++) { - if (p == softback_top) - break; - if (p == softback_buf) - p = softback_end; - p -= vc->vc_size_row; - q -= vc->vc_size_row; - scr_memcpyw((u16 *) q, (u16 *) p, - vc->vc_size_row); - } - softback_in = softback_curr = p; - update_region(vc, vc->vc_origin, - logo_lines * vc->vc_cols); - } - logo_shown = FBCON_LOGO_CANSHOW; - } - fbcon_cursor(vc, CM_ERASE | CM_SOFTBACK); - fbcon_redraw_softback(vc, disp, lines); - fbcon_cursor(vc, CM_DRAW | CM_SOFTBACK); - return; - } - - if (!scrollback_phys_max) - return; - - scrollback_old = scrollback_current; - scrollback_current -= lines; - if (scrollback_current < 0) - scrollback_current = 0; - else if (scrollback_current > scrollback_max) - scrollback_current = scrollback_max; - if (scrollback_current == scrollback_old) - return; - - if (fbcon_is_inactive(vc, info)) - return; - - fbcon_cursor(vc, CM_ERASE); - - offset = disp->yscroll - scrollback_current; - limit = disp->vrows; - switch (disp->scrollmode) { - case SCROLL_WRAP_MOVE: - info->var.vmode |= FB_VMODE_YWRAP; - break; - case SCROLL_PAN_MOVE: - case SCROLL_PAN_REDRAW: - limit -= vc->vc_rows; - info->var.vmode &= ~FB_VMODE_YWRAP; - break; - } - if (offset < 0) - offset += limit; - else if (offset >= limit) - offset -= limit; - - ops->var.xoffset = 0; - ops->var.yoffset = offset * vc->vc_font.height; - ops->update_start(info); - - if (!scrollback_current) - fbcon_cursor(vc, CM_DRAW); -} - static int fbcon_set_origin(struct vc_data *vc) { - if (softback_lines) - fbcon_scrolldelta(vc, softback_lines); return 0; } @@ -3013,8 +2693,6 @@ static void fbcon_modechanged(struct fb_info *info) fbcon_set_palette(vc, color_table); update_screen(vc); - if (softback_buf) - fbcon_update_softback(vc); } } @@ -3425,7 +3103,6 @@ static const struct consw fb_con = { .con_font_default = fbcon_set_def_font, .con_font_copy = fbcon_copy_font, .con_set_palette = fbcon_set_palette, - .con_scrolldelta = fbcon_scrolldelta, .con_set_origin = fbcon_set_origin, .con_invert_region = fbcon_invert_region, .con_screen_pos = fbcon_screen_pos, @@ -3660,9 +3337,6 @@ static void fbcon_exit(void) } #endif - kvfree((void *)softback_buf); - softback_buf = 0UL; - for_each_registered_fb(i) { int pending = 0; From 0d123a8c64fde433a9ba07390afb6f2b0d0f5dd0 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 8 Sep 2020 10:56:27 -0700 Subject: [PATCH 111/130] fbcon: remove now unusued 'softback_lines' cursor() argument commit 06a0df4d1b8b13b551668e47b11fd7629033b7df upstream. Since the softscroll code got removed, this argument is always zero and makes no sense any more. Tested-by: Yuan Ming Tested-by: Willy Tarreau Reviewed-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman --- drivers/video/fbdev/core/bitblit.c | 11 +---------- drivers/video/fbdev/core/fbcon.c | 4 ++-- drivers/video/fbdev/core/fbcon.h | 2 +- drivers/video/fbdev/core/fbcon_ccw.c | 11 +---------- drivers/video/fbdev/core/fbcon_cw.c | 11 +---------- drivers/video/fbdev/core/fbcon_ud.c | 11 +---------- drivers/video/fbdev/core/tileblit.c | 2 +- 7 files changed, 8 insertions(+), 44 deletions(-) diff --git a/drivers/video/fbdev/core/bitblit.c b/drivers/video/fbdev/core/bitblit.c index 35ebeeccde4d..436365efae73 100644 --- a/drivers/video/fbdev/core/bitblit.c +++ b/drivers/video/fbdev/core/bitblit.c @@ -234,7 +234,7 @@ static void bit_clear_margins(struct vc_data *vc, struct fb_info *info, } static void bit_cursor(struct vc_data *vc, struct fb_info *info, int mode, - int softback_lines, int fg, int bg) + int fg, int bg) { struct fb_cursor cursor; struct fbcon_ops *ops = info->fbcon_par; @@ -247,15 +247,6 @@ static void bit_cursor(struct vc_data *vc, struct fb_info *info, int mode, cursor.set = 0; - if (softback_lines) { - if (y + softback_lines >= vc->vc_rows) { - mode = CM_ERASE; - ops->cursor_flash = 0; - return; - } else - y += softback_lines; - } - c = scr_readw((u16 *) vc->vc_pos); attribute = get_attribute(info, c); src = vc->vc_font.data + ((c & charmask) * (w * vc->vc_font.height)); diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c index 5751952985db..8685d28dfdaa 100644 --- a/drivers/video/fbdev/core/fbcon.c +++ b/drivers/video/fbdev/core/fbcon.c @@ -394,7 +394,7 @@ static void fb_flashcursor(struct work_struct *work) c = scr_readw((u16 *) vc->vc_pos); mode = (!ops->cursor_flash || ops->cursor_state.enable) ? CM_ERASE : CM_DRAW; - ops->cursor(vc, info, mode, 0, get_color(vc, info, c, 1), + ops->cursor(vc, info, mode, get_color(vc, info, c, 1), get_color(vc, info, c, 0)); console_unlock(); } @@ -1339,7 +1339,7 @@ static void fbcon_cursor(struct vc_data *vc, int mode) ops->cursor_flash = (mode == CM_ERASE) ? 0 : 1; - ops->cursor(vc, info, mode, 0, get_color(vc, info, c, 1), + ops->cursor(vc, info, mode, get_color(vc, info, c, 1), get_color(vc, info, c, 0)); } diff --git a/drivers/video/fbdev/core/fbcon.h b/drivers/video/fbdev/core/fbcon.h index 20dea853765f..78bb14c03643 100644 --- a/drivers/video/fbdev/core/fbcon.h +++ b/drivers/video/fbdev/core/fbcon.h @@ -62,7 +62,7 @@ struct fbcon_ops { void (*clear_margins)(struct vc_data *vc, struct fb_info *info, int color, int bottom_only); void (*cursor)(struct vc_data *vc, struct fb_info *info, int mode, - int softback_lines, int fg, int bg); + int fg, int bg); int (*update_start)(struct fb_info *info); int (*rotate_font)(struct fb_info *info, struct vc_data *vc); struct fb_var_screeninfo var; /* copy of the current fb_var_screeninfo */ diff --git a/drivers/video/fbdev/core/fbcon_ccw.c b/drivers/video/fbdev/core/fbcon_ccw.c index 78f3a5621478..71ad6967a70e 100644 --- a/drivers/video/fbdev/core/fbcon_ccw.c +++ b/drivers/video/fbdev/core/fbcon_ccw.c @@ -219,7 +219,7 @@ static void ccw_clear_margins(struct vc_data *vc, struct fb_info *info, } static void ccw_cursor(struct vc_data *vc, struct fb_info *info, int mode, - int softback_lines, int fg, int bg) + int fg, int bg) { struct fb_cursor cursor; struct fbcon_ops *ops = info->fbcon_par; @@ -236,15 +236,6 @@ static void ccw_cursor(struct vc_data *vc, struct fb_info *info, int mode, cursor.set = 0; - if (softback_lines) { - if (y + softback_lines >= vc->vc_rows) { - mode = CM_ERASE; - ops->cursor_flash = 0; - return; - } else - y += softback_lines; - } - c = scr_readw((u16 *) vc->vc_pos); attribute = get_attribute(info, c); src = ops->fontbuffer + ((c & charmask) * (w * vc->vc_font.width)); diff --git a/drivers/video/fbdev/core/fbcon_cw.c b/drivers/video/fbdev/core/fbcon_cw.c index fd098ff17574..31fe5dd651d4 100644 --- a/drivers/video/fbdev/core/fbcon_cw.c +++ b/drivers/video/fbdev/core/fbcon_cw.c @@ -202,7 +202,7 @@ static void cw_clear_margins(struct vc_data *vc, struct fb_info *info, } static void cw_cursor(struct vc_data *vc, struct fb_info *info, int mode, - int softback_lines, int fg, int bg) + int fg, int bg) { struct fb_cursor cursor; struct fbcon_ops *ops = info->fbcon_par; @@ -219,15 +219,6 @@ static void cw_cursor(struct vc_data *vc, struct fb_info *info, int mode, cursor.set = 0; - if (softback_lines) { - if (y + softback_lines >= vc->vc_rows) { - mode = CM_ERASE; - ops->cursor_flash = 0; - return; - } else - y += softback_lines; - } - c = scr_readw((u16 *) vc->vc_pos); attribute = get_attribute(info, c); src = ops->fontbuffer + ((c & charmask) * (w * vc->vc_font.width)); diff --git a/drivers/video/fbdev/core/fbcon_ud.c b/drivers/video/fbdev/core/fbcon_ud.c index e165a3fad29a..b2dd1370e39b 100644 --- a/drivers/video/fbdev/core/fbcon_ud.c +++ b/drivers/video/fbdev/core/fbcon_ud.c @@ -249,7 +249,7 @@ static void ud_clear_margins(struct vc_data *vc, struct fb_info *info, } static void ud_cursor(struct vc_data *vc, struct fb_info *info, int mode, - int softback_lines, int fg, int bg) + int fg, int bg) { struct fb_cursor cursor; struct fbcon_ops *ops = info->fbcon_par; @@ -267,15 +267,6 @@ static void ud_cursor(struct vc_data *vc, struct fb_info *info, int mode, cursor.set = 0; - if (softback_lines) { - if (y + softback_lines >= vc->vc_rows) { - mode = CM_ERASE; - ops->cursor_flash = 0; - return; - } else - y += softback_lines; - } - c = scr_readw((u16 *) vc->vc_pos); attribute = get_attribute(info, c); src = ops->fontbuffer + ((c & charmask) * (w * vc->vc_font.height)); diff --git a/drivers/video/fbdev/core/tileblit.c b/drivers/video/fbdev/core/tileblit.c index 93390312957f..eb664dbf96f6 100644 --- a/drivers/video/fbdev/core/tileblit.c +++ b/drivers/video/fbdev/core/tileblit.c @@ -80,7 +80,7 @@ static void tile_clear_margins(struct vc_data *vc, struct fb_info *info, } static void tile_cursor(struct vc_data *vc, struct fb_info *info, int mode, - int softback_lines, int fg, int bg) + int fg, int bg) { struct fb_tilecursor cursor; int use_sw = (vc->vc_cursor_type & 0x10); From 087b6cb17df5834d395ab72da3f937380470ba15 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 9 Sep 2020 14:53:50 -0700 Subject: [PATCH 112/130] vgacon: remove software scrollback support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 973c096f6a85e5b5f2a295126ba6928d9a6afd45 upstream. Yunhai Zhang recently fixed a VGA software scrollback bug in commit ebfdfeeae8c0 ("vgacon: Fix for missing check in scrollback handling"), but that then made people look more closely at some of this code, and there were more problems on the vgacon side, but also the fbcon software scrollback. We don't really have anybody who maintains this code - probably because nobody actually _uses_ it any more. Sure, people still use both VGA and the framebuffer consoles, but they are no longer the main user interfaces to the kernel, and haven't been for decades, so these kinds of extra features end up bitrotting and not really being used. So rather than try to maintain a likely unused set of code, I'll just aggressively remove it, and see if anybody even notices. Maybe there are people who haven't jumped on the whole GUI badnwagon yet, and think it's just a fad. And maybe those people use the scrollback code. If that turns out to be the case, we can resurrect this again, once we've found the sucker^Wmaintainer for it who actually uses it. Reported-by: NopNop Nop Tested-by: Willy Tarreau Cc: 张云海 Acked-by: Andy Lutomirski Acked-by: Willy Tarreau Reviewed-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman --- arch/powerpc/configs/pasemi_defconfig | 1 - arch/powerpc/configs/ppc6xx_defconfig | 1 - arch/x86/configs/i386_defconfig | 1 - arch/x86/configs/x86_64_defconfig | 1 - drivers/video/console/Kconfig | 46 ------ drivers/video/console/vgacon.c | 221 +------------------------- 6 files changed, 1 insertion(+), 270 deletions(-) diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig index 08b7f4cef243..ddf5e97877e2 100644 --- a/arch/powerpc/configs/pasemi_defconfig +++ b/arch/powerpc/configs/pasemi_defconfig @@ -109,7 +109,6 @@ CONFIG_FB_NVIDIA=y CONFIG_FB_NVIDIA_I2C=y CONFIG_FB_RADEON=y # CONFIG_LCD_CLASS_DEVICE is not set -CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_LOGO=y CONFIG_SOUND=y CONFIG_SND=y diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig index 1372a1a7517a..682d68f39c2b 100644 --- a/arch/powerpc/configs/ppc6xx_defconfig +++ b/arch/powerpc/configs/ppc6xx_defconfig @@ -777,7 +777,6 @@ CONFIG_FB_TRIDENT=m CONFIG_FB_SM501=m CONFIG_FB_IBM_GXT4500=y CONFIG_LCD_PLATFORM=m -CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_LOGO=y diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig index 18806b4fb26a..088709089e9b 100644 --- a/arch/x86/configs/i386_defconfig +++ b/arch/x86/configs/i386_defconfig @@ -204,7 +204,6 @@ CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y CONFIG_FB_EFI=y # CONFIG_LCD_CLASS_DEVICE is not set -CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig index 3087c5e351e7..8092d7baf8b5 100644 --- a/arch/x86/configs/x86_64_defconfig +++ b/arch/x86/configs/x86_64_defconfig @@ -200,7 +200,6 @@ CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y CONFIG_FB_EFI=y # CONFIG_LCD_CLASS_DEVICE is not set -CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig index c10e17fb9a9a..3b432a18b5ab 100644 --- a/drivers/video/console/Kconfig +++ b/drivers/video/console/Kconfig @@ -22,52 +22,6 @@ config VGA_CONSOLE Say Y. -config VGACON_SOFT_SCROLLBACK - bool "Enable Scrollback Buffer in System RAM" - depends on VGA_CONSOLE - default n - help - The scrollback buffer of the standard VGA console is located in - the VGA RAM. The size of this RAM is fixed and is quite small. - If you require a larger scrollback buffer, this can be placed in - System RAM which is dynamically allocated during initialization. - Placing the scrollback buffer in System RAM will slightly slow - down the console. - - If you want this feature, say 'Y' here and enter the amount of - RAM to allocate for this buffer. If unsure, say 'N'. - -config VGACON_SOFT_SCROLLBACK_SIZE - int "Scrollback Buffer Size (in KB)" - depends on VGACON_SOFT_SCROLLBACK - range 1 1024 - default "64" - help - Enter the amount of System RAM to allocate for scrollback - buffers of VGA consoles. Each 64KB will give you approximately - 16 80x25 screenfuls of scrollback buffer. - -config VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT - bool "Persistent Scrollback History for each console by default" - depends on VGACON_SOFT_SCROLLBACK - default n - help - Say Y here if the scrollback history should persist by default when - switching between consoles. Otherwise, the scrollback history will be - flushed each time the console is switched. This feature can also be - enabled using the boot command line parameter - 'vgacon.scrollback_persistent=1'. - - This feature might break your tool of choice to flush the scrollback - buffer, e.g. clear(1) will work fine but Debian's clear_console(1) - will be broken, which might cause security issues. - You can use the escape sequence \e[3J instead if this feature is - activated. - - Note that a buffer of VGACON_SOFT_SCROLLBACK_SIZE is taken for each - created tty device. - So if you use a RAM-constrained system, say N here. - config MDA_CONSOLE depends on !M68K && !PARISC && ISA tristate "MDA text console (dual-headed)" diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c index e079b910feb2..55507df335bd 100644 --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -165,214 +165,6 @@ static inline void vga_set_mem_top(struct vc_data *c) write_vga(12, (c->vc_visible_origin - vga_vram_base) / 2); } -#ifdef CONFIG_VGACON_SOFT_SCROLLBACK -/* software scrollback */ -struct vgacon_scrollback_info { - void *data; - int tail; - int size; - int rows; - int cnt; - int cur; - int save; - int restore; -}; - -static struct vgacon_scrollback_info *vgacon_scrollback_cur; -static struct vgacon_scrollback_info vgacon_scrollbacks[MAX_NR_CONSOLES]; -static bool scrollback_persistent = \ - IS_ENABLED(CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT); -module_param_named(scrollback_persistent, scrollback_persistent, bool, 0000); -MODULE_PARM_DESC(scrollback_persistent, "Enable persistent scrollback for all vga consoles"); - -static void vgacon_scrollback_reset(int vc_num, size_t reset_size) -{ - struct vgacon_scrollback_info *scrollback = &vgacon_scrollbacks[vc_num]; - - if (scrollback->data && reset_size > 0) - memset(scrollback->data, 0, reset_size); - - scrollback->cnt = 0; - scrollback->tail = 0; - scrollback->cur = 0; -} - -static void vgacon_scrollback_init(int vc_num) -{ - int pitch = vga_video_num_columns * 2; - size_t size = CONFIG_VGACON_SOFT_SCROLLBACK_SIZE * 1024; - int rows = size / pitch; - void *data; - - data = kmalloc_array(CONFIG_VGACON_SOFT_SCROLLBACK_SIZE, 1024, - GFP_NOWAIT); - - vgacon_scrollbacks[vc_num].data = data; - vgacon_scrollback_cur = &vgacon_scrollbacks[vc_num]; - - vgacon_scrollback_cur->rows = rows - 1; - vgacon_scrollback_cur->size = rows * pitch; - - vgacon_scrollback_reset(vc_num, size); -} - -static void vgacon_scrollback_switch(int vc_num) -{ - if (!scrollback_persistent) - vc_num = 0; - - if (!vgacon_scrollbacks[vc_num].data) { - vgacon_scrollback_init(vc_num); - } else { - if (scrollback_persistent) { - vgacon_scrollback_cur = &vgacon_scrollbacks[vc_num]; - } else { - size_t size = CONFIG_VGACON_SOFT_SCROLLBACK_SIZE * 1024; - - vgacon_scrollback_reset(vc_num, size); - } - } -} - -static void vgacon_scrollback_startup(void) -{ - vgacon_scrollback_cur = &vgacon_scrollbacks[0]; - vgacon_scrollback_init(0); -} - -static void vgacon_scrollback_update(struct vc_data *c, int t, int count) -{ - void *p; - - if (!vgacon_scrollback_cur->data || !vgacon_scrollback_cur->size || - c->vc_num != fg_console) - return; - - p = (void *) (c->vc_origin + t * c->vc_size_row); - - while (count--) { - if ((vgacon_scrollback_cur->tail + c->vc_size_row) > - vgacon_scrollback_cur->size) - vgacon_scrollback_cur->tail = 0; - - scr_memcpyw(vgacon_scrollback_cur->data + - vgacon_scrollback_cur->tail, - p, c->vc_size_row); - - vgacon_scrollback_cur->cnt++; - p += c->vc_size_row; - vgacon_scrollback_cur->tail += c->vc_size_row; - - if (vgacon_scrollback_cur->tail >= vgacon_scrollback_cur->size) - vgacon_scrollback_cur->tail = 0; - - if (vgacon_scrollback_cur->cnt > vgacon_scrollback_cur->rows) - vgacon_scrollback_cur->cnt = vgacon_scrollback_cur->rows; - - vgacon_scrollback_cur->cur = vgacon_scrollback_cur->cnt; - } -} - -static void vgacon_restore_screen(struct vc_data *c) -{ - c->vc_origin = c->vc_visible_origin; - vgacon_scrollback_cur->save = 0; - - if (!vga_is_gfx && !vgacon_scrollback_cur->restore) { - scr_memcpyw((u16 *) c->vc_origin, (u16 *) c->vc_screenbuf, - c->vc_screenbuf_size > vga_vram_size ? - vga_vram_size : c->vc_screenbuf_size); - vgacon_scrollback_cur->restore = 1; - vgacon_scrollback_cur->cur = vgacon_scrollback_cur->cnt; - } -} - -static void vgacon_scrolldelta(struct vc_data *c, int lines) -{ - int start, end, count, soff; - - if (!lines) { - vgacon_restore_screen(c); - return; - } - - if (!vgacon_scrollback_cur->data) - return; - - if (!vgacon_scrollback_cur->save) { - vgacon_cursor(c, CM_ERASE); - vgacon_save_screen(c); - c->vc_origin = (unsigned long)c->vc_screenbuf; - vgacon_scrollback_cur->save = 1; - } - - vgacon_scrollback_cur->restore = 0; - start = vgacon_scrollback_cur->cur + lines; - end = start + abs(lines); - - if (start < 0) - start = 0; - - if (start > vgacon_scrollback_cur->cnt) - start = vgacon_scrollback_cur->cnt; - - if (end < 0) - end = 0; - - if (end > vgacon_scrollback_cur->cnt) - end = vgacon_scrollback_cur->cnt; - - vgacon_scrollback_cur->cur = start; - count = end - start; - soff = vgacon_scrollback_cur->tail - - ((vgacon_scrollback_cur->cnt - end) * c->vc_size_row); - soff -= count * c->vc_size_row; - - if (soff < 0) - soff += vgacon_scrollback_cur->size; - - count = vgacon_scrollback_cur->cnt - start; - - if (count > c->vc_rows) - count = c->vc_rows; - - if (count) { - int copysize; - - int diff = c->vc_rows - count; - void *d = (void *) c->vc_visible_origin; - void *s = (void *) c->vc_screenbuf; - - count *= c->vc_size_row; - /* how much memory to end of buffer left? */ - copysize = min(count, vgacon_scrollback_cur->size - soff); - scr_memcpyw(d, vgacon_scrollback_cur->data + soff, copysize); - d += copysize; - count -= copysize; - - if (count) { - scr_memcpyw(d, vgacon_scrollback_cur->data, count); - d += count; - } - - if (diff) - scr_memcpyw(d, s, diff * c->vc_size_row); - } else - vgacon_cursor(c, CM_MOVE); -} - -static void vgacon_flush_scrollback(struct vc_data *c) -{ - size_t size = CONFIG_VGACON_SOFT_SCROLLBACK_SIZE * 1024; - - vgacon_scrollback_reset(c->vc_num, size); -} -#else -#define vgacon_scrollback_startup(...) do { } while (0) -#define vgacon_scrollback_init(...) do { } while (0) -#define vgacon_scrollback_update(...) do { } while (0) -#define vgacon_scrollback_switch(...) do { } while (0) - static void vgacon_restore_screen(struct vc_data *c) { if (c->vc_origin != c->vc_visible_origin) @@ -386,11 +178,6 @@ static void vgacon_scrolldelta(struct vc_data *c, int lines) vga_set_mem_top(c); } -static void vgacon_flush_scrollback(struct vc_data *c) -{ -} -#endif /* CONFIG_VGACON_SOFT_SCROLLBACK */ - static const char *vgacon_startup(void) { const char *display_desc = NULL; @@ -573,10 +360,7 @@ static const char *vgacon_startup(void) vgacon_xres = screen_info.orig_video_cols * VGA_FONTWIDTH; vgacon_yres = vga_scan_lines; - if (!vga_init_done) { - vgacon_scrollback_startup(); - vga_init_done = true; - } + vga_init_done = true; return display_desc; } @@ -867,7 +651,6 @@ static int vgacon_switch(struct vc_data *c) vgacon_doresize(c, c->vc_cols, c->vc_rows); } - vgacon_scrollback_switch(c->vc_num); return 0; /* Redrawing not needed */ } @@ -1384,7 +1167,6 @@ static bool vgacon_scroll(struct vc_data *c, unsigned int t, unsigned int b, oldo = c->vc_origin; delta = lines * c->vc_size_row; if (dir == SM_UP) { - vgacon_scrollback_update(c, t, lines); if (c->vc_scr_end + delta >= vga_vram_end) { scr_memcpyw((u16 *) vga_vram_base, (u16 *) (oldo + delta), @@ -1448,7 +1230,6 @@ const struct consw vga_con = { .con_save_screen = vgacon_save_screen, .con_build_attr = vgacon_build_attr, .con_invert_region = vgacon_invert_region, - .con_flush_scrollback = vgacon_flush_scrollback, }; EXPORT_SYMBOL(vga_con); From a86743ebe680f020454d7d091c82c31ff55372e2 Mon Sep 17 00:00:00 2001 From: Wanpeng Li Date: Wed, 19 Aug 2020 16:55:27 +0800 Subject: [PATCH 113/130] KVM: VMX: Don't freeze guest when event delivery causes an APIC-access exit commit 99b82a1437cb31340dbb2c437a2923b9814a7b15 upstream. According to SDM 27.2.4, Event delivery causes an APIC-access VM exit. Don't report internal error and freeze guest when event delivery causes an APIC-access exit, it is handleable and the event will be re-injected during the next vmentry. Signed-off-by: Wanpeng Li Message-Id: <1597827327-25055-2-git-send-email-wanpengli@tencent.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman --- arch/x86/kvm/vmx/vmx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c index 3be65495aeb8..a1e62dda5607 100644 --- a/arch/x86/kvm/vmx/vmx.c +++ b/arch/x86/kvm/vmx/vmx.c @@ -5895,6 +5895,7 @@ static int vmx_handle_exit(struct kvm_vcpu *vcpu) (exit_reason != EXIT_REASON_EXCEPTION_NMI && exit_reason != EXIT_REASON_EPT_VIOLATION && exit_reason != EXIT_REASON_PML_FULL && + exit_reason != EXIT_REASON_APIC_ACCESS && exit_reason != EXIT_REASON_TASK_SWITCH)) { vcpu->run->exit_reason = KVM_EXIT_INTERNAL_ERROR; vcpu->run->internal.suberror = KVM_INTERNAL_ERROR_DELIVERY_EV; From d334a67d3ed06cb40f69fbd93efac2e565bebbe9 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Wed, 2 Sep 2020 11:18:29 +0100 Subject: [PATCH 114/130] KVM: arm64: Do not try to map PUDs when they are folded into PMD commit 3fb884ffe921c99483a84b0175f3c03f048e9069 upstream. For the obscure cases where PMD and PUD are the same size (64kB pages with 42bit VA, for example, which results in only two levels of page tables), we can't map anything as a PUD, because there is... erm... no PUD to speak of. Everything is either a PMD or a PTE. So let's only try and map a PUD when its size is different from that of a PMD. Cc: stable@vger.kernel.org Fixes: b8e0ba7c8bea ("KVM: arm64: Add support for creating PUD hugepages at stage 2") Reported-by: Gavin Shan Reported-by: Eric Auger Reviewed-by: Alexandru Elisei Reviewed-by: Gavin Shan Tested-by: Gavin Shan Tested-by: Eric Auger Tested-by: Alexandru Elisei Signed-off-by: Marc Zyngier Signed-off-by: Greg Kroah-Hartman --- virt/kvm/arm/mmu.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/virt/kvm/arm/mmu.c b/virt/kvm/arm/mmu.c index 7501ec8a4600..1e1c4f6a85c7 100644 --- a/virt/kvm/arm/mmu.c +++ b/virt/kvm/arm/mmu.c @@ -1814,7 +1814,12 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, (fault_status == FSC_PERM && stage2_is_exec(kvm, fault_ipa, vma_pagesize)); - if (vma_pagesize == PUD_SIZE) { + /* + * If PUD_SIZE == PMD_SIZE, there is no real PUD level, and + * all we have is a 2-level page table. Trying to map a PUD in + * this case would be fatally wrong. + */ + if (PUD_SIZE != PMD_SIZE && vma_pagesize == PUD_SIZE) { pud_t new_pud = kvm_pfn_pud(pfn, mem_type); new_pud = kvm_pud_mkhuge(new_pud); From 41b2ea7a6a11e2b1a7f2c29e1675a709a6b2b98d Mon Sep 17 00:00:00 2001 From: Rustam Kovhaev Date: Mon, 7 Sep 2020 11:55:35 -0700 Subject: [PATCH 115/130] KVM: fix memory leak in kvm_io_bus_unregister_dev() commit f65886606c2d3b562716de030706dfe1bea4ed5e upstream. when kmalloc() fails in kvm_io_bus_unregister_dev(), before removing the bus, we should iterate over all other devices linked to it and call kvm_iodevice_destructor() for them Fixes: 90db10434b16 ("KVM: kvm_io_bus_unregister_dev() should never fail") Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+f196caa45793d6374707@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=f196caa45793d6374707 Signed-off-by: Rustam Kovhaev Reviewed-by: Vitaly Kuznetsov Message-Id: <20200907185535.233114-1-rkovhaev@gmail.com> Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman --- virt/kvm/kvm_main.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 278bdc53047e..4eed7fd8db93 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -4010,7 +4010,7 @@ int kvm_io_bus_register_dev(struct kvm *kvm, enum kvm_bus bus_idx, gpa_t addr, void kvm_io_bus_unregister_dev(struct kvm *kvm, enum kvm_bus bus_idx, struct kvm_io_device *dev) { - int i; + int i, j; struct kvm_io_bus *new_bus, *bus; bus = kvm_get_bus(kvm, bus_idx); @@ -4027,17 +4027,20 @@ void kvm_io_bus_unregister_dev(struct kvm *kvm, enum kvm_bus bus_idx, new_bus = kmalloc(struct_size(bus, range, bus->dev_count - 1), GFP_KERNEL_ACCOUNT); - if (!new_bus) { + if (new_bus) { + memcpy(new_bus, bus, sizeof(*bus) + i * sizeof(struct kvm_io_range)); + new_bus->dev_count--; + memcpy(new_bus->range + i, bus->range + i + 1, + (new_bus->dev_count - i) * sizeof(struct kvm_io_range)); + } else { pr_err("kvm: failed to shrink bus, removing it completely\n"); - goto broken; + for (j = 0; j < bus->dev_count; j++) { + if (j == i) + continue; + kvm_iodevice_destructor(bus->range[j].dev); + } } - memcpy(new_bus, bus, sizeof(*bus) + i * sizeof(struct kvm_io_range)); - new_bus->dev_count--; - memcpy(new_bus->range + i, bus->range + i + 1, - (new_bus->dev_count - i) * sizeof(struct kvm_io_range)); - -broken: rcu_assign_pointer(kvm->buses[bus_idx], new_bus); synchronize_srcu_expedited(&kvm->srcu); kfree(bus); From 323159acb2b5df62d1af831edd5a0db4e0026628 Mon Sep 17 00:00:00 2001 From: Vladis Dronov Date: Tue, 11 Aug 2020 17:01:29 +0200 Subject: [PATCH 116/130] debugfs: Fix module state check condition commit e3b9fc7eec55e6fdc8beeed18f2ed207086341e2 upstream. The '#ifdef MODULE' check in the original commit does not work as intended. The code under the check is not built at all if CONFIG_DEBUG_FS=y. Fix this by using a correct check. Fixes: 275678e7a9be ("debugfs: Check module state before warning in {full/open}_proxy_open()") Signed-off-by: Vladis Dronov Cc: stable Link: https://lore.kernel.org/r/20200811150129.53343-1-vdronov@redhat.com Signed-off-by: Greg Kroah-Hartman --- fs/debugfs/file.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/debugfs/file.c b/fs/debugfs/file.c index b43960794922..943637298f65 100644 --- a/fs/debugfs/file.c +++ b/fs/debugfs/file.c @@ -176,7 +176,7 @@ static int open_proxy_open(struct inode *inode, struct file *filp) goto out; if (!fops_get(real_fops)) { -#ifdef MODULE +#ifdef CONFIG_MODULES if (real_fops->owner && real_fops->owner->state == MODULE_STATE_GOING) goto out; @@ -311,7 +311,7 @@ static int full_proxy_open(struct inode *inode, struct file *filp) goto out; if (!fops_get(real_fops)) { -#ifdef MODULE +#ifdef CONFIG_MODULES if (real_fops->owner && real_fops->owner->state == MODULE_STATE_GOING) goto out; From 9dd48c399a8132e571ea5eb843e130a227a69ad8 Mon Sep 17 00:00:00 2001 From: Chris Healy Date: Fri, 21 Aug 2020 14:21:02 -0700 Subject: [PATCH 117/130] ARM: dts: vfxxx: Add syscon compatible with OCOTP commit 2a6838d54128952ace6f0ca166dd8706abe46649 upstream. Add syscon compatibility with Vybrid OCOTP node. This is required to access the UID. Fixes: fa8d20c8dbb77 ("ARM: dts: vfxxx: Add node corresponding to OCOTP") Cc: stable@vger.kernel.org Reviewed-by: Fabio Estevam Reviewed-by: Stefan Agner Signed-off-by: Chris Healy Signed-off-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman --- arch/arm/boot/dts/vfxxx.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index 028e0ec30e0c..fa248066d9d9 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -495,7 +495,7 @@ }; ocotp: ocotp@400a5000 { - compatible = "fsl,vf610-ocotp"; + compatible = "fsl,vf610-ocotp", "syscon"; reg = <0x400a5000 0x1000>; clocks = <&clks VF610_CLK_OCOTP>; }; From 3aa4c49c8d417798f0c0fb3df3903037f77a6f12 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Mon, 31 Aug 2020 19:37:00 +0900 Subject: [PATCH 118/130] video: fbdev: fix OOB read in vga_8planes_imageblit() commit bd018a6a75cebb511bb55a0e7690024be975fe93 upstream. syzbot is reporting OOB read at vga_8planes_imageblit() [1], for "cdat[y] >> 4" can become a negative value due to "const char *cdat". [1] https://syzkaller.appspot.com/bug?id=0d7a0da1557dcd1989e00cb3692b26d4173b4132 Reported-by: syzbot Signed-off-by: Tetsuo Handa Cc: stable Link: https://lore.kernel.org/r/90b55ec3-d5b0-3307-9f7c-7ff5c5fd6ad3@i-love.sakura.ne.jp Signed-off-by: Greg Kroah-Hartman --- drivers/video/fbdev/vga16fb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/fbdev/vga16fb.c b/drivers/video/fbdev/vga16fb.c index 2c6a576ed84c..4b83109202b1 100644 --- a/drivers/video/fbdev/vga16fb.c +++ b/drivers/video/fbdev/vga16fb.c @@ -1121,7 +1121,7 @@ static void vga_8planes_imageblit(struct fb_info *info, const struct fb_image *i char oldop = setop(0); char oldsr = setsr(0); char oldmask = selectmask(); - const char *cdat = image->data; + const unsigned char *cdat = image->data; u32 dx = image->dx; char __iomem *where; int y; From 524e525fa73ecf7a790b29b7795085a5300631b2 Mon Sep 17 00:00:00 2001 From: Vaibhav Agarwal Date: Fri, 14 Aug 2020 18:03:15 +0530 Subject: [PATCH 119/130] staging: greybus: audio: fix uninitialized value issue commit 1dffeb8b8b4c261c45416d53c75ea51e6ece1770 upstream. The current implementation for gbcodec_mixer_dapm_ctl_put() uses uninitialized gbvalue for comparison with updated value. This was found using static analysis with coverity. Uninitialized scalar variable (UNINIT) 11. uninit_use: Using uninitialized value gbvalue.value.integer_value[0]. 460 if (gbvalue.value.integer_value[0] != val) { This patch fixes the issue with fetching the gbvalue before using it for comparision. Fixes: 6339d2322c47 ("greybus: audio: Add topology parser for GB codec") Reported-by: Colin Ian King Signed-off-by: Vaibhav Agarwal Cc: stable Link: https://lore.kernel.org/r/bc4f29eb502ccf93cd2ffd98db0e319fa7d0f247.1597408126.git.vaibhav.sr@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/staging/greybus/audio_topology.c | 29 ++++++++++++------------ 1 file changed, 15 insertions(+), 14 deletions(-) diff --git a/drivers/staging/greybus/audio_topology.c b/drivers/staging/greybus/audio_topology.c index 4ac30accf226..cc329b990e16 100644 --- a/drivers/staging/greybus/audio_topology.c +++ b/drivers/staging/greybus/audio_topology.c @@ -460,6 +460,15 @@ static int gbcodec_mixer_dapm_ctl_put(struct snd_kcontrol *kcontrol, val = ucontrol->value.integer.value[0] & mask; connect = !!val; + ret = gb_pm_runtime_get_sync(bundle); + if (ret) + return ret; + + ret = gb_audio_gb_get_control(module->mgmt_connection, data->ctl_id, + GB_AUDIO_INVALID_INDEX, &gbvalue); + if (ret) + goto exit; + /* update ucontrol */ if (gbvalue.value.integer_value[0] != val) { for (wi = 0; wi < wlist->num_widgets; wi++) { @@ -473,25 +482,17 @@ static int gbcodec_mixer_dapm_ctl_put(struct snd_kcontrol *kcontrol, gbvalue.value.integer_value[0] = cpu_to_le32(ucontrol->value.integer.value[0]); - ret = gb_pm_runtime_get_sync(bundle); - if (ret) - return ret; - ret = gb_audio_gb_set_control(module->mgmt_connection, data->ctl_id, GB_AUDIO_INVALID_INDEX, &gbvalue); - - gb_pm_runtime_put_autosuspend(bundle); - - if (ret) { - dev_err_ratelimited(codec->dev, - "%d:Error in %s for %s\n", ret, - __func__, kcontrol->id.name); - return ret; - } } - return 0; +exit: + gb_pm_runtime_put_autosuspend(bundle); + if (ret) + dev_err_ratelimited(codec_dev, "%d:Error in %s for %s\n", ret, + __func__, kcontrol->id.name); + return ret; } #define SOC_DAPM_MIXER_GB(xname, kcount, data) \ From 83db8dd32b1d00f77916dba000b02b08f74157df Mon Sep 17 00:00:00 2001 From: Sivaprakash Murugesan Date: Wed, 29 Jul 2020 21:00:03 +0530 Subject: [PATCH 120/130] phy: qcom-qmp: Use correct values for ipq8074 PCIe Gen2 PHY init commit afd55e6d1bd35b4b36847869011447a83a81c8e0 upstream. There were some problem in ipq8074 Gen2 PCIe phy init sequence. 1. Few register values were wrongly updated in the phy init sequence. 2. The register QSERDES_RX_SIGDET_CNTRL is a RX tuning parameter register which is added in serdes table causing the wrong register was getting updated. 3. Clocks and resets were not added in the phy init. Fix these to make Gen2 PCIe port on ipq8074 devices to work. Fixes: eef243d04b2b6 ("phy: qcom-qmp: Add support for IPQ8074") Cc: stable@vger.kernel.org Co-developed-by: Selvam Sathappan Periakaruppan Signed-off-by: Selvam Sathappan Periakaruppan Signed-off-by: Sivaprakash Murugesan Link: https://lore.kernel.org/r/1596036607-11877-4-git-send-email-sivaprak@codeaurora.org Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman --- drivers/phy/qualcomm/phy-qcom-qmp.c | 16 +++++++++------- drivers/phy/qualcomm/phy-qcom-qmp.h | 2 ++ 2 files changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index 27dd20a7fe13..5ddbf9a1f328 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -402,8 +402,8 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0xf), QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x1), QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x0), - QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0x1f), - QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff), + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f), QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x6), QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0xf), QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x0), @@ -429,7 +429,6 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x0), QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80), QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x1), - QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0xa), QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x1), QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31), QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x1), @@ -438,7 +437,6 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f), QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19), QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19), - QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x7), }; static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = { @@ -446,6 +444,8 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x6), QMP_PHY_INIT_CFG(QSERDES_TX_RES_CODE_LANE_OFFSET, 0x2), QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12), + QMP_PHY_INIT_CFG(QSERDES_TX_EMP_POST1_LVL, 0x36), + QMP_PHY_INIT_CFG(QSERDES_TX_SLEW_CNTL, 0x0a), }; static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = { @@ -456,7 +456,6 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb), QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b), QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x4), - QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN_HALF, 0x4), }; static const struct qmp_phy_init_tbl ipq8074_pcie_pcs_tbl[] = { @@ -1107,6 +1106,9 @@ static const struct qmp_phy_cfg msm8996_usb3phy_cfg = { .pwrdn_ctrl = SW_PWRDN, }; +static const char * const ipq8074_pciephy_clk_l[] = { + "aux", "cfg_ahb", +}; /* list of resets */ static const char * const ipq8074_pciephy_reset_l[] = { "phy", "common", @@ -1124,8 +1126,8 @@ static const struct qmp_phy_cfg ipq8074_pciephy_cfg = { .rx_tbl_num = ARRAY_SIZE(ipq8074_pcie_rx_tbl), .pcs_tbl = ipq8074_pcie_pcs_tbl, .pcs_tbl_num = ARRAY_SIZE(ipq8074_pcie_pcs_tbl), - .clk_list = NULL, - .num_clks = 0, + .clk_list = ipq8074_pciephy_clk_l, + .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l), .reset_list = ipq8074_pciephy_reset_l, .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l), .vreg_list = NULL, diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h index 335ea5d7ef40..f6b1e6359b8c 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h @@ -77,6 +77,8 @@ #define QSERDES_COM_CORECLK_DIV_MODE1 0x1bc /* Only for QMP V2 PHY - TX registers */ +#define QSERDES_TX_EMP_POST1_LVL 0x018 +#define QSERDES_TX_SLEW_CNTL 0x040 #define QSERDES_TX_RES_CODE_LANE_OFFSET 0x054 #define QSERDES_TX_DEBUG_BUS_SEL 0x064 #define QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN 0x068 From 70a9c0352e219fc87ccdeb54793e457abbef81e3 Mon Sep 17 00:00:00 2001 From: Zeng Tao Date: Fri, 4 Sep 2020 14:37:44 +0800 Subject: [PATCH 121/130] usb: core: fix slab-out-of-bounds Read in read_descriptors commit a18cd6c9b6bc73dc17e8b7e9bd07decaa8833c97 upstream. The USB device descriptor may get changed between two consecutive enumerations on the same device for some reason, such as DFU or malicius device. In that case, we may access the changing descriptor if we don't take the device lock here. The issue is reported: https://syzkaller.appspot.com/bug?id=901a0d9e6519ef8dc7acab25344bd287dd3c7be9 Cc: stable Cc: Alan Stern Reported-by: syzbot+256e56ddde8b8957eabd@syzkaller.appspotmail.com Fixes: 217a9081d8e6 ("USB: add all configs to the "descriptors" attribute") Signed-off-by: Zeng Tao Link: https://lore.kernel.org/r/1599201467-11000-1-git-send-email-prime.zeng@hisilicon.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/sysfs.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index f19694e69f5c..2f594c88d905 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -889,7 +889,11 @@ read_descriptors(struct file *filp, struct kobject *kobj, size_t srclen, n; int cfgno; void *src; + int retval; + retval = usb_lock_device_interruptible(udev); + if (retval < 0) + return -EINTR; /* The binary attribute begins with the device descriptor. * Following that are the raw descriptor entries for all the * configurations (config plus subsidiary descriptors). @@ -914,6 +918,7 @@ read_descriptors(struct file *filp, struct kobject *kobj, off -= srclen; } } + usb_unlock_device(udev); return count - nleft; } From 38e75a99b4861bfdc77bd776b30cd684bb5960a3 Mon Sep 17 00:00:00 2001 From: Patrick Riphagen Date: Thu, 6 Aug 2020 13:55:47 +0200 Subject: [PATCH 122/130] USB: serial: ftdi_sio: add IDs for Xsens Mti USB converter commit 6ccc48e0eb2f3a5f3bd39954a21317e5f8874726 upstream. The device added has an FTDI chip inside. The device is used to connect Xsens USB Motion Trackers. Cc: stable@vger.kernel.org Signed-off-by: Patrick Riphagen Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio_ids.h | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 33f1cca7eaa6..ae98fe94fe91 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -713,6 +713,7 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(XSENS_VID, XSENS_AWINDA_STATION_PID) }, { USB_DEVICE(XSENS_VID, XSENS_CONVERTER_PID) }, { USB_DEVICE(XSENS_VID, XSENS_MTDEVBOARD_PID) }, + { USB_DEVICE(XSENS_VID, XSENS_MTIUSBCONVERTER_PID) }, { USB_DEVICE(XSENS_VID, XSENS_MTW_PID) }, { USB_DEVICE(FTDI_VID, FTDI_OMNI1509) }, { USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index e8373528264c..b5ca17a5967a 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -160,6 +160,7 @@ #define XSENS_AWINDA_DONGLE_PID 0x0102 #define XSENS_MTW_PID 0x0200 /* Xsens MTw */ #define XSENS_MTDEVBOARD_PID 0x0300 /* Motion Tracker Development Board */ +#define XSENS_MTIUSBCONVERTER_PID 0x0301 /* MTi USB converter */ #define XSENS_CONVERTER_PID 0xD00D /* Xsens USB-serial converter */ /* Xsens devices using FTDI VID */ From dbbb21384fe63266d8b2547077f9404d383c71c9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Sat, 29 Aug 2020 15:42:50 +0200 Subject: [PATCH 123/130] USB: serial: option: support dynamic Quectel USB compositions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 2bb70f0a4b238323e4e2f392fc3ddeb5b7208c9e upstream. The USB composition, defining the set of exported functions, is dynamic in newer Quectel modems. Default functions can be disabled and alternative functions can be enabled instead. The alternatives includes class functions using interface pairs, which should be handled by the respective class drivers. Active interfaces are numbered consecutively, so static blacklisting based on interface numbers will fail when the composition changes. An example of such an error, where the option driver has bound to the CDC ECM data interface, preventing cdc_ether from handling this function: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0125 Rev= 3.18 S: Manufacturer=Quectel S: Product=EC25-AF C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 4 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I:* If#= 5 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=option I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Another device with the same id gets correct drivers, since the interface of the network function happens to be blacklisted by option: T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0125 Rev= 3.18 S: Manufacturer=Android S: Product=Android C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Change rules for EC21, EC25, BG96 and EG95 to match vendor specific serial functions only, to prevent binding to class functions. Require 2 endpoints on ff/ff/ff functions, avoiding the 3 endpoint QMI/RMNET network functions. Cc: AceLan Kao Cc: Sebastian Sjoholm Cc: Dan Williams Cc: stable@vger.kernel.org Signed-off-by: Bjørn Mork Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 9b7cee98ea60..955bb7a2d81e 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1094,14 +1094,18 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(QUALCOMM_VENDOR_ID, UBLOX_PRODUCT_R410M), .driver_info = RSVD(1) | RSVD(3) }, /* Quectel products using Quectel vendor ID */ - { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21), - .driver_info = RSVD(4) }, - { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25), - .driver_info = RSVD(4) }, - { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95), - .driver_info = RSVD(4) }, - { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96), - .driver_info = RSVD(4) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21, 0xff, 0xff, 0xff), + .driver_info = NUMEP2 }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25, 0xff, 0xff, 0xff), + .driver_info = NUMEP2 }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0xff, 0xff), + .driver_info = NUMEP2 }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96, 0xff, 0xff, 0xff), + .driver_info = NUMEP2 }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff), .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) }, From 224fa057d72af8c1262947e8a875640e886980c9 Mon Sep 17 00:00:00 2001 From: Aleksander Morgado Date: Sat, 29 Aug 2020 11:05:39 +0200 Subject: [PATCH 124/130] USB: serial: option: add support for SIM7070/SIM7080/SIM7090 modules commit 1ac698790819b83f39fd7ea4f6cdabee9bdd7b38 upstream. These modules have 2 different USB layouts: The default layout with PID 0x9205 (AT+CUSBSELNV=1) exposes 4 TTYs and an ECM interface: T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e0e ProdID=9205 Rev=00.00 S: Manufacturer=SimTech, Incorporated S: Product=SimTech SIM7080 S: SerialNumber=1234567890ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#=0x5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether The purpose of each TTY is as follows: * ttyUSB0: DIAG/QCDM port. * ttyUSB1: GNSS data. * ttyUSB2: AT-capable port (control). * ttyUSB3: AT-capable port (data). In the secondary layout with PID=0x9206 (AT+CUSBSELNV=86) the module exposes 6 TTY ports: T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=02(commc) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1e0e ProdID=9206 Rev=00.00 S: Manufacturer=SimTech, Incorporated S: Product=SimTech SIM7080 S: SerialNumber=1234567890ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option The purpose of each TTY is as follows: * ttyUSB0: DIAG/QCDM port. * ttyUSB1: GNSS data. * ttyUSB2: AT-capable port (control). * ttyUSB3: QFLOG interface. * ttyUSB4: DAM interface. * ttyUSB5: AT-capable port (data). Signed-off-by: Aleksander Morgado Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 955bb7a2d81e..f7a6ac05ac57 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1823,6 +1823,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9003, 0xff) }, /* Simcom SIM7500/SIM7600 MBIM mode */ { USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9011, 0xff), /* Simcom SIM7500/SIM7600 RNDIS mode */ .driver_info = RSVD(7) }, + { USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9205, 0xff) }, /* Simcom SIM7070/SIM7080/SIM7090 AT+ECM mode */ + { USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9206, 0xff) }, /* Simcom SIM7070/SIM7080/SIM7090 AT-only mode */ { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200), .driver_info = NCTRL(0) | NCTRL(1) | RSVD(4) }, { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D), From 848eeb75c81daee3c6de9513b0615164871ae2f4 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Tue, 1 Sep 2020 11:25:28 +0300 Subject: [PATCH 125/130] usb: Fix out of sync data toggle if a configured device is reconfigured commit cfd54fa83a5068b61b7eb28d3c117d8354c74c7a upstream. Userspace drivers that use a SetConfiguration() request to "lightweight" reset an already configured usb device might cause data toggles to get out of sync between the device and host, and the device becomes unusable. The xHCI host requires endpoints to be dropped and added back to reset the toggle. If USB core notices the new configuration is the same as the current active configuration it will avoid these extra steps by calling usb_reset_configuration() instead of usb_set_configuration(). A SetConfiguration() request will reset the device side data toggles. Make sure usb_reset_configuration() function also drops and adds back the endpoints to ensure data toggles are in sync. To avoid code duplication split the current usb_disable_device() function and reuse the endpoint specific part. Cc: stable Tested-by: Martin Thierer Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200901082528.12557-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/message.c | 91 ++++++++++++++++++-------------------- 1 file changed, 42 insertions(+), 49 deletions(-) diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index a1ac2f0723b0..041c68ea329f 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1204,6 +1204,34 @@ void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf, } } +/* + * usb_disable_device_endpoints -- Disable all endpoints for a device + * @dev: the device whose endpoints are being disabled + * @skip_ep0: 0 to disable endpoint 0, 1 to skip it. + */ +static void usb_disable_device_endpoints(struct usb_device *dev, int skip_ep0) +{ + struct usb_hcd *hcd = bus_to_hcd(dev->bus); + int i; + + if (hcd->driver->check_bandwidth) { + /* First pass: Cancel URBs, leave endpoint pointers intact. */ + for (i = skip_ep0; i < 16; ++i) { + usb_disable_endpoint(dev, i, false); + usb_disable_endpoint(dev, i + USB_DIR_IN, false); + } + /* Remove endpoints from the host controller internal state */ + mutex_lock(hcd->bandwidth_mutex); + usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL); + mutex_unlock(hcd->bandwidth_mutex); + } + /* Second pass: remove endpoint pointers */ + for (i = skip_ep0; i < 16; ++i) { + usb_disable_endpoint(dev, i, true); + usb_disable_endpoint(dev, i + USB_DIR_IN, true); + } +} + /** * usb_disable_device - Disable all the endpoints for a USB device * @dev: the device whose endpoints are being disabled @@ -1217,7 +1245,6 @@ void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf, void usb_disable_device(struct usb_device *dev, int skip_ep0) { int i; - struct usb_hcd *hcd = bus_to_hcd(dev->bus); /* getting rid of interfaces will disconnect * any drivers bound to them (a key side effect) @@ -1263,22 +1290,8 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__, skip_ep0 ? "non-ep0" : "all"); - if (hcd->driver->check_bandwidth) { - /* First pass: Cancel URBs, leave endpoint pointers intact. */ - for (i = skip_ep0; i < 16; ++i) { - usb_disable_endpoint(dev, i, false); - usb_disable_endpoint(dev, i + USB_DIR_IN, false); - } - /* Remove endpoints from the host controller internal state */ - mutex_lock(hcd->bandwidth_mutex); - usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL); - mutex_unlock(hcd->bandwidth_mutex); - /* Second pass: remove endpoint pointers */ - } - for (i = skip_ep0; i < 16; ++i) { - usb_disable_endpoint(dev, i, true); - usb_disable_endpoint(dev, i + USB_DIR_IN, true); - } + + usb_disable_device_endpoints(dev, skip_ep0); } /** @@ -1521,6 +1534,9 @@ EXPORT_SYMBOL_GPL(usb_set_interface); * The caller must own the device lock. * * Return: Zero on success, else a negative error code. + * + * If this routine fails the device will probably be in an unusable state + * with endpoints disabled, and interfaces only partially enabled. */ int usb_reset_configuration(struct usb_device *dev) { @@ -1536,10 +1552,7 @@ int usb_reset_configuration(struct usb_device *dev) * calls during probe() are fine */ - for (i = 1; i < 16; ++i) { - usb_disable_endpoint(dev, i, true); - usb_disable_endpoint(dev, i + USB_DIR_IN, true); - } + usb_disable_device_endpoints(dev, 1); /* skip ep0*/ config = dev->actconfig; retval = 0; @@ -1552,34 +1565,10 @@ int usb_reset_configuration(struct usb_device *dev) mutex_unlock(hcd->bandwidth_mutex); return -ENOMEM; } - /* Make sure we have enough bandwidth for each alternate setting 0 */ - for (i = 0; i < config->desc.bNumInterfaces; i++) { - struct usb_interface *intf = config->interface[i]; - struct usb_host_interface *alt; - alt = usb_altnum_to_altsetting(intf, 0); - if (!alt) - alt = &intf->altsetting[0]; - if (alt != intf->cur_altsetting) - retval = usb_hcd_alloc_bandwidth(dev, NULL, - intf->cur_altsetting, alt); - if (retval < 0) - break; - } - /* If not, reinstate the old alternate settings */ + /* xHCI adds all endpoints in usb_hcd_alloc_bandwidth */ + retval = usb_hcd_alloc_bandwidth(dev, config, NULL, NULL); if (retval < 0) { -reset_old_alts: - for (i--; i >= 0; i--) { - struct usb_interface *intf = config->interface[i]; - struct usb_host_interface *alt; - - alt = usb_altnum_to_altsetting(intf, 0); - if (!alt) - alt = &intf->altsetting[0]; - if (alt != intf->cur_altsetting) - usb_hcd_alloc_bandwidth(dev, NULL, - alt, intf->cur_altsetting); - } usb_enable_lpm(dev); mutex_unlock(hcd->bandwidth_mutex); return retval; @@ -1588,8 +1577,12 @@ reset_old_alts: USB_REQ_SET_CONFIGURATION, 0, config->desc.bConfigurationValue, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); - if (retval < 0) - goto reset_old_alts; + if (retval < 0) { + usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL); + usb_enable_lpm(dev); + mutex_unlock(hcd->bandwidth_mutex); + return retval; + } mutex_unlock(hcd->bandwidth_mutex); /* re-init hc/hcd interface/endpoint state */ From ebd9aff7b62ad70fa06ca0cb468a178f6c057fe4 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Fri, 4 Sep 2020 14:09:18 +0300 Subject: [PATCH 126/130] usb: typec: ucsi: acpi: Check the _DEP dependencies commit 1f3546ff3f0a1000971daef58406954bad3f7061 upstream. Failing probe with -EPROBE_DEFER until all dependencies listed in the _DEP (Operation Region Dependencies) object have been met. This will fix an issue where on some platforms UCSI ACPI driver fails to probe because the address space handler for the operation region that the UCSI ACPI interface uses has not been loaded yet. Fixes: 8243edf44152 ("usb: typec: ucsi: Add ACPI driver") Cc: stable@vger.kernel.org Signed-off-by: Heikki Krogerus Link: https://lore.kernel.org/r/20200904110918.51546-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/ucsi/ucsi_acpi.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/typec/ucsi/ucsi_acpi.c b/drivers/usb/typec/ucsi/ucsi_acpi.c index a18112a83fae..dda8bd39c918 100644 --- a/drivers/usb/typec/ucsi/ucsi_acpi.c +++ b/drivers/usb/typec/ucsi/ucsi_acpi.c @@ -64,11 +64,15 @@ static void ucsi_acpi_notify(acpi_handle handle, u32 event, void *data) static int ucsi_acpi_probe(struct platform_device *pdev) { + struct acpi_device *adev = ACPI_COMPANION(&pdev->dev); struct ucsi_acpi *ua; struct resource *res; acpi_status status; int ret; + if (adev->dep_unmet) + return -EPROBE_DEFER; + ua = devm_kzalloc(&pdev->dev, sizeof(*ua), GFP_KERNEL); if (!ua) return -ENOMEM; From 8cbe9b765487ef1b3f9ea37a768d4907ca577b56 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 17 Aug 2020 09:23:09 -0700 Subject: [PATCH 127/130] drm/msm/gpu: make ringbuffer readonly [ Upstream commit 352c83fb39cae3eff95a8e1ed23006291abb6196 ] The GPU has no business writing into the ringbuffer, let's make it readonly to the GPU. Fixes: 7198e6b03155 ("drm/msm: add a3xx gpu support") Signed-off-by: Rob Clark Reviewed-by: Jordan Crouse Signed-off-by: Rob Clark Signed-off-by: Sasha Levin --- drivers/gpu/drm/msm/msm_ringbuffer.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/msm_ringbuffer.c b/drivers/gpu/drm/msm/msm_ringbuffer.c index e397c44cc011..39ecb5a18431 100644 --- a/drivers/gpu/drm/msm/msm_ringbuffer.c +++ b/drivers/gpu/drm/msm/msm_ringbuffer.c @@ -27,7 +27,8 @@ struct msm_ringbuffer *msm_ringbuffer_new(struct msm_gpu *gpu, int id, ring->id = id; ring->start = msm_gem_kernel_new(gpu->dev, MSM_GPU_RINGBUFFER_SZ, - MSM_BO_WC, gpu->aspace, &ring->bo, &ring->iova); + MSM_BO_WC | MSM_BO_GPU_READONLY, gpu->aspace, &ring->bo, + &ring->iova); if (IS_ERR(ring->start)) { ret = PTR_ERR(ring->start); From fe79f1cf177afd7804e793c59726d2f008f50b0b Mon Sep 17 00:00:00 2001 From: Jordan Crouse Date: Thu, 3 Sep 2020 20:03:13 -0600 Subject: [PATCH 128/130] drm/msm: Disable the RPTR shadow [ Upstream commit f6828e0c4045f03f9cf2df6c2a768102641183f4 ] Disable the RPTR shadow across all targets. It will be selectively re-enabled later for targets that need it. Cc: stable@vger.kernel.org Signed-off-by: Jordan Crouse Signed-off-by: Rob Clark Signed-off-by: Sasha Levin --- drivers/gpu/drm/msm/adreno/a2xx_gpu.c | 5 +++++ drivers/gpu/drm/msm/adreno/a3xx_gpu.c | 10 +++++++++ drivers/gpu/drm/msm/adreno/a4xx_gpu.c | 10 +++++++++ drivers/gpu/drm/msm/adreno/a5xx_gpu.c | 11 ++++++++-- drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 7 +++++++ drivers/gpu/drm/msm/adreno/adreno_gpu.c | 27 ++----------------------- 6 files changed, 43 insertions(+), 27 deletions(-) diff --git a/drivers/gpu/drm/msm/adreno/a2xx_gpu.c b/drivers/gpu/drm/msm/adreno/a2xx_gpu.c index 1f83bc18d500..80f3b1da9fc2 100644 --- a/drivers/gpu/drm/msm/adreno/a2xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a2xx_gpu.c @@ -164,6 +164,11 @@ static int a2xx_hw_init(struct msm_gpu *gpu) if (ret) return ret; + gpu_write(gpu, REG_AXXX_CP_RB_CNTL, + MSM_GPU_RB_CNTL_DEFAULT | AXXX_CP_RB_CNTL_NO_UPDATE); + + gpu_write(gpu, REG_AXXX_CP_RB_BASE, lower_32_bits(gpu->rb[0]->iova)); + /* NOTE: PM4/micro-engine firmware registers look to be the same * for a2xx and a3xx.. we could possibly push that part down to * adreno_gpu base class. Or push both PM4 and PFP but diff --git a/drivers/gpu/drm/msm/adreno/a3xx_gpu.c b/drivers/gpu/drm/msm/adreno/a3xx_gpu.c index 5f7e98028eaf..eeba2deeca1e 100644 --- a/drivers/gpu/drm/msm/adreno/a3xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a3xx_gpu.c @@ -215,6 +215,16 @@ static int a3xx_hw_init(struct msm_gpu *gpu) if (ret) return ret; + /* + * Use the default ringbuffer size and block size but disable the RPTR + * shadow + */ + gpu_write(gpu, REG_AXXX_CP_RB_CNTL, + MSM_GPU_RB_CNTL_DEFAULT | AXXX_CP_RB_CNTL_NO_UPDATE); + + /* Set the ringbuffer address */ + gpu_write(gpu, REG_AXXX_CP_RB_BASE, lower_32_bits(gpu->rb[0]->iova)); + /* setup access protection: */ gpu_write(gpu, REG_A3XX_CP_PROTECT_CTRL, 0x00000007); diff --git a/drivers/gpu/drm/msm/adreno/a4xx_gpu.c b/drivers/gpu/drm/msm/adreno/a4xx_gpu.c index ab2b752566d8..05cfa81d4c54 100644 --- a/drivers/gpu/drm/msm/adreno/a4xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a4xx_gpu.c @@ -265,6 +265,16 @@ static int a4xx_hw_init(struct msm_gpu *gpu) if (ret) return ret; + /* + * Use the default ringbuffer size and block size but disable the RPTR + * shadow + */ + gpu_write(gpu, REG_A4XX_CP_RB_CNTL, + MSM_GPU_RB_CNTL_DEFAULT | AXXX_CP_RB_CNTL_NO_UPDATE); + + /* Set the ringbuffer address */ + gpu_write(gpu, REG_A4XX_CP_RB_BASE, lower_32_bits(gpu->rb[0]->iova)); + /* Load PM4: */ ptr = (uint32_t *)(adreno_gpu->fw[ADRENO_FW_PM4]->data); len = adreno_gpu->fw[ADRENO_FW_PM4]->size / 4; diff --git a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c index 4a484b06319f..24b55103bfe0 100644 --- a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c @@ -677,14 +677,21 @@ static int a5xx_hw_init(struct msm_gpu *gpu) if (ret) return ret; - a5xx_preempt_hw_init(gpu); - a5xx_gpmu_ucode_init(gpu); ret = a5xx_ucode_init(gpu); if (ret) return ret; + /* Set the ringbuffer address */ + gpu_write64(gpu, REG_A5XX_CP_RB_BASE, REG_A5XX_CP_RB_BASE_HI, + gpu->rb[0]->iova); + + gpu_write(gpu, REG_A5XX_CP_RB_CNTL, + MSM_GPU_RB_CNTL_DEFAULT | AXXX_CP_RB_CNTL_NO_UPDATE); + + a5xx_preempt_hw_init(gpu); + /* Disable the interrupts through the initial bringup stage */ gpu_write(gpu, REG_A5XX_RBBM_INT_0_MASK, A5XX_INT_MASK); diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c index be68d4e6551c..ab75f0309d4b 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c @@ -512,6 +512,13 @@ static int a6xx_hw_init(struct msm_gpu *gpu) if (ret) goto out; + /* Set the ringbuffer address */ + gpu_write64(gpu, REG_A6XX_CP_RB_BASE, REG_A6XX_CP_RB_BASE_HI, + gpu->rb[0]->iova); + + gpu_write(gpu, REG_A6XX_CP_RB_CNTL, + MSM_GPU_RB_CNTL_DEFAULT | AXXX_CP_RB_CNTL_NO_UPDATE); + /* Always come up on rb 0 */ a6xx_gpu->cur_ring = gpu->rb[0]; diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c index 053da39da1cc..3802ad38c519 100644 --- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c +++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c @@ -354,26 +354,6 @@ int adreno_hw_init(struct msm_gpu *gpu) ring->memptrs->rptr = 0; } - /* - * Setup REG_CP_RB_CNTL. The same value is used across targets (with - * the excpetion of A430 that disables the RPTR shadow) - the cacluation - * for the ringbuffer size and block size is moved to msm_gpu.h for the - * pre-processor to deal with and the A430 variant is ORed in here - */ - adreno_gpu_write(adreno_gpu, REG_ADRENO_CP_RB_CNTL, - MSM_GPU_RB_CNTL_DEFAULT | - (adreno_is_a430(adreno_gpu) ? AXXX_CP_RB_CNTL_NO_UPDATE : 0)); - - /* Setup ringbuffer address - use ringbuffer[0] for GPU init */ - adreno_gpu_write64(adreno_gpu, REG_ADRENO_CP_RB_BASE, - REG_ADRENO_CP_RB_BASE_HI, gpu->rb[0]->iova); - - if (!adreno_is_a430(adreno_gpu)) { - adreno_gpu_write64(adreno_gpu, REG_ADRENO_CP_RB_RPTR_ADDR, - REG_ADRENO_CP_RB_RPTR_ADDR_HI, - rbmemptr(gpu->rb[0], rptr)); - } - return 0; } @@ -381,11 +361,8 @@ int adreno_hw_init(struct msm_gpu *gpu) static uint32_t get_rptr(struct adreno_gpu *adreno_gpu, struct msm_ringbuffer *ring) { - if (adreno_is_a430(adreno_gpu)) - return ring->memptrs->rptr = adreno_gpu_read( - adreno_gpu, REG_ADRENO_CP_RB_RPTR); - else - return ring->memptrs->rptr; + return ring->memptrs->rptr = adreno_gpu_read( + adreno_gpu, REG_ADRENO_CP_RB_RPTR); } struct msm_ringbuffer *adreno_active_ring(struct msm_gpu *gpu) From d3c2b7d2856cb82bf2166ebc22c06c268b533773 Mon Sep 17 00:00:00 2001 From: Peter Oberparleiter Date: Thu, 10 Sep 2020 14:52:01 +0200 Subject: [PATCH 129/130] gcov: add support for GCC 10.1 [ Upstream commit 40249c6962075c040fd071339acae524f18bfac9 ] Using gcov to collect coverage data for kernels compiled with GCC 10.1 causes random malfunctions and kernel crashes. This is the result of a changed GCOV_COUNTERS value in GCC 10.1 that causes a mismatch between the layout of the gcov_info structure created by GCC profiling code and the related structure used by the kernel. Fix this by updating the in-kernel GCOV_COUNTERS value. Also re-enable config GCOV_KERNEL for use with GCC 10. Reported-by: Colin Ian King Reported-by: Leon Romanovsky Signed-off-by: Peter Oberparleiter Tested-by: Leon Romanovsky Tested-and-Acked-by: Colin Ian King Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin --- kernel/gcov/Kconfig | 1 - kernel/gcov/gcc_4_7.c | 4 +++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/kernel/gcov/Kconfig b/kernel/gcov/Kconfig index 005d8b851bc1..3941a9c48f83 100644 --- a/kernel/gcov/Kconfig +++ b/kernel/gcov/Kconfig @@ -4,7 +4,6 @@ menu "GCOV-based kernel profiling" config GCOV_KERNEL bool "Enable gcov-based kernel profiling" depends on DEBUG_FS - depends on !CC_IS_GCC || GCC_VERSION < 100000 select CONSTRUCTORS if !UML default n ---help--- diff --git a/kernel/gcov/gcc_4_7.c b/kernel/gcov/gcc_4_7.c index ec37563674d6..60c7be5ff5c8 100644 --- a/kernel/gcov/gcc_4_7.c +++ b/kernel/gcov/gcc_4_7.c @@ -19,7 +19,9 @@ #include #include "gcov.h" -#if (__GNUC__ >= 7) +#if (__GNUC__ >= 10) +#define GCOV_COUNTERS 8 +#elif (__GNUC__ >= 7) #define GCOV_COUNTERS 9 #elif (__GNUC__ > 5) || (__GNUC__ == 5 && __GNUC_MINOR__ >= 1) #define GCOV_COUNTERS 10 From bdc3a8f6a8e8b798c46683a98b97d52b3a5708e4 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 17 Sep 2020 13:47:56 +0200 Subject: [PATCH 130/130] Linux 5.4.66 Tested-by: Shuah Khan Tested-by: Jon Hunter Tested-by: Linux Kernel Functional Testing Tested-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 4cb68164b79e..a3686247e10e 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 VERSION = 5 PATCHLEVEL = 4 -SUBLEVEL = 65 +SUBLEVEL = 66 EXTRAVERSION = NAME = Kleptomaniac Octopus